terminated by signal SIGSEGV (Address boundary error)

jan1024188 · 2014-06-06 13:03:05

Hi,

I was doing a bit of multitasking, and the kernel ran out of SWAP and crashed. After reboot everything is borked. Every program I had open prior to crash wont start or crashes soon after opening. (Chromium, Clementine, Terminal, Smuxi, VMware...). The error is either segmentation fault or some weird error.

Smuxi:
Stack overflow: IP: 0x7f0d476380ff, fault addr: (nil)
Stacktrace:
at <unknown> <0xffffffff>
at Gtk.Application.Run () [0x00001] in /build/gtk-sharp-2/src/gtk-sharp-2.12.22/gtk/Application.cs:135
<...>
at Smuxi.Frontend.Gnome.Frontend.Init (string[]) [0x00239] in /build/smuxi/src/smuxi-0.11/src/Frontend-GNOME/Frontend.cs:281
at Smuxi.Frontend.Gnome.MainClass.Main (string[]) [0x000b2] in /build/smuxi/src/smuxi-0.11/src/Frontend-GNOME/Main.cs:75
at (wrapper runtime-invoke) <Module>.runtime_invoke_void_object (object,intptr,intptr,intptr) <IL 0x00050, 0xffffffff>

~ % chromium
[7585:7610:0606/150214:ERROR:nss_util.cc(853)] After loading Root Certs, loaded==false: NSS error code: -8018
[7585:7585:0606/150214:ERROR:component_loader.cc(138)] Failed to parse extension manifest.
[7585:7585:0606/150214:ERROR:background_mode_manager_aura.cc(14)] Not implemented reached in virtual void BackgroundModeManager::EnableLaunchOnStartup(bool)
fish: Job 1, “chromium” terminated by signal SIGSEGV (Address boundary error)

~ % lxterminal
fish: Job 1, “lxterminal ” terminated by signal SIGSEGV (Address boundary error)

~ % clementine
14:44:49.823 WARN unknown libpng warning: iCCP: Not recognizing known sRGB profile that has been edited
14:44:50.217 WARN unknown libpng warning: iCCP: Not recognizing known sRGB profile that has been edited
14:54:12.230 WARN unknown QTimeLine::start: already running
14:54:13.089 WARN unknown QTimeLine::start: already running
14:54:13.434 WARN unknown QTimeLine::start: already running
14:54:13.737 WARN unknown QTimeLine::start: already running
14:54:14.378 WARN unknown QTimeLine::start: already running
14:54:14.686 WARN unknown QTimeLine::start: already running
14:54:15.050 WARN unknown QTimeLine::start: already running
14:54:15.876 WARN unknown QTimeLine::start: already running
14:54:16.152 WARN unknown QTimeLine::start: already running
14:54:16.454 WARN unknown QTimeLine::start: already running
14:54:17.409 WARN unknown QTimeLine::start: already running
14:54:20.256 WARN unknown QTimeLine::start: already running
14:54:22.687 WARN unknown QTimeLine::start: already running
14:54:32.169 WARN unknown QTimeLine::start: already running
14:54:33.489 WARN unknown QTimeLine::start: already running
fish: Job 1, “clementine” terminated by signal SIGSEGV (Address boundary error)

~ % steam
Running Steam on arch 64-bit
STEAM_RUNTIME is enabled automatically
Installing breakpad exception handler for appid(steam)/version(1401381906_client)
Installing breakpad exception handler for appid(steam)/version(1401381906_client)
Installing breakpad exception handler for appid(steam)/version(1401381906_client)
Uploading dump (out-of-process) [proxy '']
/tmp/dumps/assert_20140606150623_1.dmp
/home/jan/.local/share/Steam/steam.sh: line 755: 8003 Segmentation fault (core dumped) $STEAM_DEBUGGER "$STEAMROOT/$PLATFORM/$STEAMEXE" "$@"

What do?

EDIT:
It is also worth mentioning that I've had ran the update earlier today, which may have something to do with this:
[2014-06-06 14:06] [PACMAN] Running 'pacman -Syu'
[2014-06-06 14:06] [PACMAN] synchronizing package lists
[2014-06-06 14:06] [PACMAN] starting full system upgrade
[2014-06-06 14:09] [PACMAN] upgraded libwbclient (4.1.7-1 -> 4.1.8-1)
[2014-06-06 14:09] [PACMAN] upgraded cifs-utils (6.2-1 -> 6.3-1)
[2014-06-06 14:09] [PACMAN] upgraded clutter-gst (2.0.10-2 -> 2.0.12-1)
[2014-06-06 14:09] [PACMAN] upgraded dart (1.4.0-1 -> 1.4.2-1)
[2014-06-06 14:09] [PACMAN] upgraded e2fsprogs (1.42.9-2 -> 1.42.10-1)
[2014-06-06 14:09] [PACMAN] installed libx264 (1:142.20140311-4)
[2014-06-06 14:09] [PACMAN] upgraded x264 (1:142.20140311-1 -> 1:142.20140311-4)
[2014-06-06 14:09] [PACMAN] upgraded ffmpeg (1:2.2.2-3 -> 1:2.2.3-1)
[2014-06-06 14:09] [ALPM] warning: /etc/passwd installed as /etc/passwd.pacnew
[2014-06-06 14:09] [ALPM] warning: /etc/group installed as /etc/group.pacnew
[2014-06-06 14:09] [PACMAN] upgraded filesystem (2013.05-2 -> 2014.05-2)
[2014-06-06 14:09] [PACMAN] upgraded gdk-pixbuf2 (2.30.7-1 -> 2.30.8-1)
[2014-06-06 14:09] [PACMAN] upgraded gedit (3.12.1-1 -> 3.12.2-1)
[2014-06-06 14:09] [PACMAN] upgraded gmime (2.6.20-1 -> 2.6.20-2)
[2014-06-06 14:09] [PACMAN] upgraded gnome-calculator (3.12.1-1 -> 3.12.2-1)
[2014-06-06 14:09] [PACMAN] upgraded gnome-icon-theme-symbolic (3.12.0-1 -> 3.12.0-2)
[2014-06-06 14:09] [PACMAN] upgraded gnome-icon-theme (3.12.0-1 -> 3.12.0-2)
[2014-06-06 14:09] [PACMAN] upgraded gnome-menus (3.10.1-1 -> 3.10.1-2)
[2014-06-06 14:09] [PACMAN] upgraded gnome-tetravex (3.12.2-1 -> 3.12.3-1)
[2014-06-06 14:09] [PACMAN] upgraded gnupg (2.0.22-2 -> 2.0.23-1)
[2014-06-06 14:09] [PACMAN] upgraded graphviz (2.36.0-2 -> 2.36.0-3)
[2014-06-06 14:09] [PACMAN] upgraded gupnp (0.20.11-1 -> 0.20.12-1)
[2014-06-06 14:09] [PACMAN] upgraded perl (5.18.2-2 -> 5.20.0-2)
[2014-06-06 14:09] [PACMAN] upgraded vim-runtime (7.4.307-3 -> 7.4.307-4)
[2014-06-06 14:09] [PACMAN] upgraded openssl (1.0.1.g-1 -> 1.0.1.h-1)
[2014-06-06 14:09] [PACMAN] upgraded python2 (2.7.6-3 -> 2.7.7-1)
[2014-06-06 14:09] [PACMAN] upgraded gvim (7.4.307-3 -> 7.4.307-4)
[2014-06-06 14:09] [PACMAN] upgraded imagemagick (6.8.9.1-2 -> 6.8.9.1-3)
[2014-06-06 14:09] [PACMAN] upgraded python-setuptools (3.6-1 -> 4.0.1-1)
[2014-06-06 14:09] [PACMAN] upgraded ipython (2.0.0-1 -> 2.1.0-1)
[2014-06-06 14:09] [PACMAN] upgraded irssi (0.8.15-8 -> 0.8.16-1)
[2014-06-06 14:09] [PACMAN] upgraded json-glib (1.0.0-1 -> 1.0.2-1)
[2014-06-06 14:09] [PACMAN] upgraded lib32-libdbus (1.8.0-1 -> 1.8.2-1)
[2014-06-06 14:09] [PACMAN] upgraded libsystemd (212-3 -> 213-5)
[2014-06-06 14:09] [PACMAN] upgraded libatasmart (0.19-2 -> 0.19-3)
[2014-06-06 14:09] [PACMAN] upgraded libgdata (0.15.0-1 -> 0.15.1-1)
[2014-06-06 14:09] [PACMAN] upgraded libinput (0.1.0-1 -> 0.2.0-1)
[2014-06-06 14:09] [PACMAN] upgraded libmms (0.6.2-1 -> 0.6.4-1)
[2014-06-06 14:09] [PACMAN] upgraded libproxy (0.4.11-2 -> 0.4.11-3)
[2014-06-06 14:09] [PACMAN] upgraded libpurple (2.10.9-1 -> 2.10.9-2)
[2014-06-06 14:09] [PACMAN] upgraded libxcursor (1.1.14-1 -> 1.1.14-2)
[2014-06-06 14:09] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2014-06-06 14:09] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Starting build: 3.14.5-1-ARCH
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [resume]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [keymap]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Starting build: 3.14.5-1-ARCH
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [resume]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [keymap]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2014-06-06 14:10] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-06-06 14:10] [PACMAN] upgraded linux (3.14.4-1 -> 3.14.5-1)
[2014-06-06 14:10] [PACMAN] upgraded linux-headers (3.14.4-1 -> 3.14.5-1)
[2014-06-06 14:10] [PACMAN] upgraded mercurial (3.0-1 -> 3.0.1-1)
[2014-06-06 14:10] [PACMAN] upgraded net-snmp (5.7.2.1-2 -> 5.7.2.1-3)
[2014-06-06 14:10] [PACMAN] upgraded perl-io-tty (1.11-1 -> 1.11-2)
[2014-06-06 14:10] [PACMAN] upgraded perl-xml-parser (2.41-4 -> 2.41-5)
[2014-06-06 14:10] [PACMAN] upgraded postgresql-libs (9.3.4-1 -> 9.3.4-2)
[2014-06-06 14:10] [PACMAN] upgraded postgresql (9.3.4-1 -> 9.3.4-2)
[2014-06-06 14:10] [PACMAN] upgraded python2-setuptools (3.6-1 -> 4.0.1-1)
[2014-06-06 14:10] [ALPM-SCRIPTLET] Redis starts from redis user by default. Check redis.service file
[2014-06-06 14:10] [PACMAN] upgraded redis (2.8.9-1 -> 2.8.10-1)
[2014-06-06 14:10] [PACMAN] upgraded rrdtool (1.4.8-3 -> 1.4.8-4)
[2014-06-06 14:10] [PACMAN] upgraded rygel (0.22.1-1 -> 0.22.2-1)
[2014-06-06 14:10] [PACMAN] upgraded smbclient (4.1.7-1 -> 4.1.8-1)
[2014-06-06 14:10] [PACMAN] upgraded systemd (212-3 -> 213-5)
[2014-06-06 14:10] [PACMAN] upgraded subversion (1.8.9-1 -> 1.8.9-2)
[2014-06-06 14:10] [PACMAN] upgraded systemd-sysvcompat (212-3 -> 213-5)
[2014-06-06 14:10] [PACMAN] upgraded xfconf (4.10.0-3 -> 4.10.0-4)
[2014-06-06 14:10] [PACMAN] upgraded youtube-dl (2014.06.02-1 -> 2014.06.04-1)

Last edited by jan1024188 (2014-06-06 13:54:27)

bhrgunatha · 2014-06-06 14:16:21

Try downgrading libxcursor back to 1.1.14-1

There are several posts here about segfaults being caused by the upgrade libxcursor (1.1.14-1 -> 1.1.14-2)
The first few results of a search for libxcursor will give more details.

e.g.
https://bbs.archlinux.org/viewtopic.php?id=182343
https://bbs.archlinux.org/viewtopic.php?id=182464

Last edited by bhrgunatha (2014-06-06 14:16:42)

karol · 2014-06-06 22:19:01

jan1024188, please edit your post.
When posting configs, code or command output, please use [ code ] tags https://bbs.archlinux.org/help.php#bbcode

like this

It makes the code more readable and - in case of longer listings - more convenient to scroll through.

astroboy589 · 2014-06-07 01:51:42

+1.... the pacman /var/cache/pacman/pkg/libxcursor-1.1.14-1-x86_64.pkg.tar.xz did the trick for me...

Google-chrome-stable, Keepass, Chromium, and other applications were crashing for me

harbind · 2014-06-07 06:56:52

Downgrading libxcursor didn't help for me, still segfault.

Edit: it was a scripts that was on autoload that caused the crash.

Last edited by harbind (2014-06-10 10:00:08)

jan1024188 · 2014-06-08 02:54:11

astroboy589 wrote:

+1.... the pacman /var/cache/pacman/pkg/libxcursor-1.1.14-1-x86_64.pkg.tar.xz did the trick for me...
Google-chrome-stable, Keepass, Chromium, and other applications were crashing for me

+1

bladdo · 2014-09-07 19:16:59

harbind wrote:

Downgrading libxcursor didn't help for me, still segfault.
Edit: it was a scripts that was on autoload that caused the crash.

Can you elaborate on your fix?
I'm having the same issue with cpan, perl, urxvt, after a many month slep on pacman -Syu

Arch Linux

#1 2014-06-06 13:03:05

terminated by signal SIGSEGV (Address boundary error)

#2 2014-06-06 14:16:21

Re: terminated by signal SIGSEGV (Address boundary error)

#3 2014-06-06 22:19:01

Re: terminated by signal SIGSEGV (Address boundary error)

#4 2014-06-07 01:51:42

Re: terminated by signal SIGSEGV (Address boundary error)

#5 2014-06-07 06:56:52

Re: terminated by signal SIGSEGV (Address boundary error)

#6 2014-06-08 02:54:11

Re: terminated by signal SIGSEGV (Address boundary error)

#7 2014-09-07 19:16:59

Re: terminated by signal SIGSEGV (Address boundary error)

Board footer