Arch Linux

aligator

Member

Registered: 2013-10-07

Posts: 75

Re: KF 5 & Plasma

The wmsystray in the AUR doesn't work anymore. But I found another link:
http://distro.ibiblio.org/amigolinux/do … .1.tar.bz2

I used this with the AUR-package but I get this if I launch it:

segmentation fault (core dumped)  wmsystray

johni

Member

Registered: 2012-02-03

Posts: 102

Re: KF 5 & Plasma

The wmsystray in the AUR doesn't work anymore. But I found another link:
http://distro.ibiblio.org/amigolinux/do … .1.tar.bz2

I used this with the AUR-package but I get this if I launch it:

segmentation fault (core dumped)  wmsystray

Use the "wmsystemtray" from aur rather than "wmsystray". It worked much better for me.  I think wmsystray is an older incarnation of the same program.

maevius

Member

From: Greece

Registered: 2009-09-10

Posts: 135

Website

Re: KF 5 & Plasma

I ended up using stalonetray. Very much prettier than wmsystemtray. Converted in a bash script and made it start on boot.

#!/usr/bin/env bash

#/usr/bin/stalonetray --icon-size=24 --geometry=1x1+1340-34 --dockapp-mode=simple --grow-gravity=SE --sticky=true --window-layer=top &
/usr/bin/stalonetray --icon-size=24 --geometry=1x1-1245-4 --dockapp-mode=simple --grow-gravity=SE --sticky=true --window-layer=top &

The first one places it in the bottom right corner above my panel. The second one above the Virtual desktop switcher. Any added icons expand it to the left.

Last edited by maevius (2015-02-07 10:35:33)

BKLive

Member

From: Georgia

Registered: 2008-01-28

Posts: 125

Re: KF 5 & Plasma

Hi,

I've also switched to 5.2 and was able to resolve all my -minor- issues. However, I ran into an issue with steam.

I can set a starter in the docker/icon bar and start all needed programs per starter (dolphin, kontact, teamspeak, konsole, firefox, calibre) except - steam.

The starter doesn't do anything, the startmenu entry doesn't do anything and the desktop shortcut doesn't do anything. Installing and reinstalling doesn't help either.

Starting konsole and running steam per commandline works though. So steam seems not to be the problem - itself -.

Have others had this bug? Any ideas?

Ty

I am running Steam in Plasma and I have start menu items for all the games in All Applications > Games as well as I can get the system to add an icon to the launcher bar for when the app "is not running". Are you running a base install? Did you install the complete plasma or plasma-meta package?

---

Main Arch Setup: HP Pavillion p7-1209, Quad-Core i3-2120 3.3Ghz, 8GB RAM, 1TB HDD, Intel Graphics
Laptop Arch Setup: Gateway lt3103u Netbook, AMD Athlon64 1.2Ghz, 2GB RAM, 250GB HDD, ATI X1270 R600

stathisq

Member

Registered: 2012-01-08

Posts: 20

Re: KF 5 & Plasma

Hi! I got problems with desktop transparency when enabling the opengl compositor...With XRender everything works fine. Check the following screenshots.
(My graphics card is intel HD3000,and with KDE4 everything worked perfect)
XRender

GLX

Bwt other effects works.Do you have any similar problems?

kostas213

Member

From: Zürich

Registered: 2012-04-11

Posts: 53

Re: KF 5 & Plasma

You're right stathisq. I also have Intel HD 3000 Graphics, and I notice the same thing. The weird thing is that at KDE's site the "default" Plasma screenshots show Plasma without a transparent bar (https://www.kde.org/announcements/plasm … screen.png). So I think that the intended result is the OpenGL one.

By the way, if you notice very carefully, you will see that the bar is already trasnparent at OpenGL (just a little). I don't know if it can be adjusted from somewhere.

cappuccino

Member

Registered: 2012-12-26

Posts: 114

Re: KF 5 & Plasma

Bwt other effects works.Do you have any similar problems?

Same here plus with switching to XRender I get nasty menu and tooltips transparency:

Graphics: 
Card-1: Intel 3rd Gen Core processor Graphics Controller
Card-2: NVIDIA GK107M [GeForce GT 650M]
Display Server: X.Org 1.16.3 drivers: intel (unloaded: vesa) Resolution: 1920x1080@60.01hz
GLX Renderer: Mesa DRI Intel Ivybridge Mobile GLX Version: 3.0 Mesa 10.4.3

Kernel: 3.18.5-1-ARCH x86_64
Desktop: KDE 5
Desktop theme: Dark Breeze

oltreseba

Member

Registered: 2015-02-07

Posts: 3

Re: KF 5 & Plasma

Hi Guys!, can someone help me?

I've installed the last version with pacman, but i'm having huge issues with the appearance of some elements. In fact all the (i think) "plasma" items looks really really bad.
They look all pixelated (a lot) and also several items are not working properly. Screens:

I've also tried deleting several folders. Can someone help me?

Also the window decoration is really small.

The machine is a laptop with native resolution of 3200××1800 but right now i'm using it at 1920×1080 (it's giving the same issue at all resolution and even with an other external monitor.)

I think it's something silly but i haven't yet figured out how to fix this.

Last edited by oltreseba (2015-02-07 15:27:12)

miszasty93

Member

Registered: 2015-02-07

Posts: 3

Re: KF 5 & Plasma

Hi How do I install dolphin ? Which repo ?

Last edited by miszasty93 (2015-02-07 16:30:57)

PootisBird

Member

Registered: 2014-04-16

Posts: 125

Re: KF 5 & Plasma

kdebase-dolphin

Learn how to pacman -Ss stuff. If you mean kf5 dolphin then from AUR.

Last edited by PootisBird (2015-02-07 16:41:13)

kar

Member

From: Berlin

Registered: 2013-01-30

Posts: 19

Re: KF 5 & Plasma

I ended up using stalonetray. Very much prettier than wmsystemtray. Converted in a bash script and made it start on boot.

#!/usr/bin/env bash

#/usr/bin/stalonetray --icon-size=24 --geometry=1x1+1340-34 --dockapp-mode=simple --grow-gravity=SE --sticky=true --window-layer=top &
/usr/bin/stalonetray --icon-size=24 --geometry=1x1-1245-4 --dockapp-mode=simple --grow-gravity=SE --sticky=true --window-layer=top &

The first one places it in the bottom right corner above my panel. The second one above the Virtual desktop switcher. Any added icons expand it to the left.

How can I add icons or apps (like Dropbox)? If I start stalonetray with your script, the little window is empty and has a grey background.

Dropbox is running, but I can't see the icon in stalonetray or in the "new" systray of Plasma 5.

Thank you.

Soukyuu

Member

Registered: 2014-04-08

Posts: 854

Re: KF 5 & Plasma

Hi Guys!, can someone help me?

I've installed the last version with pacman, but i'm having huge issues with the appearance of some elements. In fact all the (i think) "plasma" items looks really really bad.
They look all pixelated (a lot) and also several items are not working properly.

Have you tried looking at DPI settings? On my laptop's monitor it looks so pixelated after the start but then it rescales the icons and they turn smooth. Maybe it's detecting your screen's DPI incorrectly?

If you mean kf5 dolphin then from AUR.

Any visible changes in appearance/functionality on that one?

---

[ Arch x86_64 | linux | Framework 13 | AMD Ryzen™ 5 7640U | 32GB RAM | KDE Plasma Wayland ]

oltreseba

Member

Registered: 2015-02-07

Posts: 3

Re: KF 5 & Plasma

Hi Guys!, can someone help me?

I've installed the last version with pacman, but i'm having huge issues with the appearance of some elements. In fact all the (i think) "plasma" items looks really really bad.
They look all pixelated (a lot) and also several items are not working properly.

Have you tried looking at DPI settings? On my laptop's monitor it looks so pixelated after the start but then it rescales the icons and they turn smooth. Maybe it's detecting your screen's DPI incorrectly?

I've tried changing the font dpi setting but nothing changed.
The command:

xdpyinfo | grep dots

reports:

resolution:    96x96 dots per inch

I don't know if there are any other configurations to do, i havent' found any.

Last edited by oltreseba (2015-02-07 17:33:14)

kostas213

Member

From: Zürich

Registered: 2012-04-11

Posts: 53

Re: KF 5 & Plasma

@oltreseba: You could try to reset at default every possible appearance settings at System Settings panel. But first check the DPI settings at System Settings > Fonts.

oltreseba

Member

Registered: 2015-02-07

Posts: 3

Re: KF 5 & Plasma

Right now since it was working really BAD, i've uninstalled plasma and restored the kdeworkspace base. Now still i've application like: kate, konsole e gwenview that are working really bad.

How should i do to change settings related with plasma-next applications? also l'ive tried changing DPI settings in systemsettings (for kde4) but it didn't changed anything.

Last edited by oltreseba (2015-02-07 18:30:09)

PootisBird

Member

Registered: 2014-04-16

Posts: 125

Re: KF 5 & Plasma

If you mean kf5 dolphin then from AUR.

Any visible changes in appearance/functionality on that one?

I haven't noticed. I was forced to revert to distro packages though. I will recompile plasma-git tomorrow on Arch prepared just to do  that.

stathisq

Member

Registered: 2012-01-08

Posts: 20

Re: KF 5 & Plasma

Hi guys. I finally found out the reason that i hadn't transparent panels, Just go the the desktop effects session and uncheck the "background contrast" option,
One more question, has anyone managed to make dropbox tray icon to appear to system tray?

maxrd2

Member

Registered: 2014-09-16

Posts: 7

Re: KF 5 & Plasma

If anyone's interested... regarding keyboard shortcuts not working, and not being able to change them.
Have created a patch here: https://github.com/maxrd2/kxmlgui/commi … 499346b9d5

If you want to try it:

$ yaourt -S aur/kxmlgui-git

and then edit PKGBUILD and change source line from source=('git://anongit.kde.org/kxmlgui.git') to:

source=('git+https://github.com/maxrd2/kxmlgui.git')

Last edited by maxrd2 (2015-02-08 04:31:20)

kar

Member

From: Berlin

Registered: 2013-01-30

Posts: 19

Re: KF 5 & Plasma

One more question, has anyone managed to make dropbox tray icon to appear to system tray?

It should work with stalontray or wmsystemtray, but for me it doesn't work. Both trays are empty, thats why I can't see the DropBox icon.

Please see my comment (test with stalonetray):
https://bbs.archlinux.org/viewtopic.php … 3#p1500683

mcpalls

Member

From: Roma - Italy

Registered: 2012-02-22

Posts: 23

Re: KF 5 & Plasma

i installed wmsystemtray 1.4 from aur and the config file is:
my wmsystemtray.kwinrule is
(import it by system setting -> window management-> window rules)

[Application settings for wmsystemtray]
Description=Application settings for wmsystemtray
above=true
aboverule=2
desktop=-1
desktoprule=2
noborder=true
noborderrule=2
position=1833,5
positionrule=2
size=53,32
sizerule=2
skippager=true
skippagerrule=2
skipswitcher=true
skipswitcherrule=2
type=2
typerule=2
wmclass=wmsystemtray0 wmsystemtray
wmclasscomplete=true
wmclassmatch=1

this is wmsystemtray.desktop for  autostart

[Desktop Entry]
Comment[it]=
Comment=
Comment[en_US]=
Exec=wmsystemtray --non-wmaker --bgcolor gray
GenericName[it]=
GenericName=
GenericName[en_US]=
Icon=system-run
MimeType=
Name[it]=wmsystemtray
Name=wmsystemtray
Name[en_US]=wmsystemtray
OnlyShowIn=KDE
Path=
StartupNotify=true
Terminal=false
TerminalOptions=
Type=Application
X-DBUS-ServiceName=
X-DBUS-StartupType=none
X-KDE-SubstituteUID=false
X-KDE-Username=
Categories=KDE

copy it in ~/.config/autostart
at the end
logout and login

p.s
position=1833,5
it's for me the top on right in my panel  ( i added a separator)

required:
(gtk-2)libappindicator-gtk2, (gtk-3)libappindicator-gtk3 , read the wiki

Last edited by mcpalls (2015-02-09 12:05:39)

veaceslav

Member

Registered: 2014-10-26

Posts: 6

Re: KF 5 & Plasma

Hello, my name is Veaceslav and I'm a KDE developer(digiKam)

We are now working on KF5 port for digiKam on frameworks branch:

ArchLinux is giving us some troubles when compiling and installing with cmake:

first:
KDE recommend to port KStandardDirs to QStandardDirs.. unfortunately Archlinux do not have /usr/share/apps in XDG_DATA_DIRS and start-up fails with errors from not being able to locate shared files.

the second:

cmake variable from KDEInstallDir ${PLUGINS_INSTALL_DIR} points to /usr/lib/plugins while ArchLinux store it to /usr/lib/qt/plugins and digikam can't locate kioslaves.

To whom I must report this problems?

Thank you

mcloaked

Member

From: Yorkshire, UK

Registered: 2012-02-02

Posts: 1,240

Re: KF 5 & Plasma

Hello, my name is Veaceslav and I'm a KDE developer(digiKam)

We are now working on KF5 port for digiKam on frameworks branch:

ArchLinux is giving us some troubles when compiling and installing with cmake:

first:
KDE recommend to port KStandardDirs to QStandardDirs.. unfortunately Archlinux do not have /usr/share/apps in XDG_DATA_DIRS and start-up fails with errors from not being able to locate shared files.

the second:

cmake variable from KDEInstallDir ${PLUGINS_INSTALL_DIR} points to /usr/lib/plugins while ArchLinux store it to /usr/lib/qt/plugins and digikam can't locate kioslaves.

To whom I must report this problems?

Thank you

The likely best option would be to add a report to https://bugs.archlinux.org/ and a developer will likely comment/reply on the bug report once generated. Not all developers monitor this forum, but they are all aware of the bugs on flyspray. It is possible that there may be some issue with the way that you are running the compile, so other users may well ask for details and reply here as well.

There is an old arch thread concerning the variable you mention at https://bbs.archlinux.org/viewtopic.php?id=142545 but I don't know if that applies currently.

Also this bug report may be relevant too https://bugs.archlinux.org/task/35197

Last edited by mcloaked (2015-02-10 11:03:17)

---

Mike C

arojas

Developer

From: Spain

Registered: 2011-10-09

Posts: 2,098

Re: KF 5 & Plasma

first:
KDE recommend to port KStandardDirs to QStandardDirs.. unfortunately Archlinux do not have /usr/share/apps in XDG_DATA_DIRS and start-up fails with errors from not being able to locate shared files.

Isn't /usr/share/apps KDE4 specific? I thought KF5 apps were supposed to install everything in the standard /usr/share/ path.

cmake variable from KDEInstallDir ${PLUGINS_INSTALL_DIR} points to /usr/lib/plugins while ArchLinux store it to /usr/lib/qt/plugins and digikam can't locate kioslaves.

You need to use the -DKDE_INSTALL_USE_QT_SYS_PATHS=ON cmake flag, see the digikam-frameworks-git PKGBUILD in AUR.

veaceslav

Member

Registered: 2014-10-26

Posts: 6

Re: KF 5 & Plasma

Thank you very much the XDG_DATA was my mistake, it works without /usr/share/apps and cmake flag solved other issues

The Infinity

Member

Registered: 2014-07-05

Posts: 91

Website

Re: KF 5 & Plasma

How can I add icons or apps (like Dropbox)? If I start stalonetray with your script, the little window is empty and has a grey background.

Dropbox is running, but I can't see the icon in stalonetray or in the "new" systray of Plasma 5.

Thank you.

I do not use Dropbox myself, but with libappindicator-*, lib32-libappindicator, sni-qt and lib32-sni-qt the "new" systray of Plasma 5 should display all icons of GTK2, GTK3, Qt4 and Qt5 applications (32-bit and 64-bit).

Last edited by The Infinity (2015-02-10 17:51:46)

---

AUR packages | GitHub page