You are not logged in.

#1 2014-10-17 17:34:48

damwdan
Member
Registered: 2014-10-17
Posts: 4

[SOLVED] Intel 7260 Vaio can't connect to wifi

Hi there,

First off, I should mention that I know my way around Linux but I'm pretty new to Arch, so there might be things that I know that don't apply here.

So, I have this problem with this network, I can't connect to it and frankly I don't know why. I was on Ubuntu until a few days ago and I still had the problem. I posted on the Ubuntu forum >>here<< and I was told to upgrade, but as I've been willing to move to Arch for quite some time, I thought that was maybe the time. BUT, the problem is still there, which worries me.

To sum it up, about one or two weeks ago, I was connecting fine to this network (ZyXEL) and then after a reboot, no way to connect to it, no matter what I try. I have noticed an error message that keeps coming back all the time (see below) and the wifi indicator in i3status sometimes flashes me with an IP while I'm trying to connect then eventually the network disappears (not with wicd, only nm). Those are basically the symptoms.

$ dmesg | grep iwlwifi
[    1.194191] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002)
[    1.194323] iwlwifi 0000:01:00.0: irq 61 for MSI/MSI-X
[    1.267714] iwlwifi 0000:01:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
[    1.284399] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
[    1.284446] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[    1.284661] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[    2.896518] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[    2.896733] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[   35.768085] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[   35.768302] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[   35.793332] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[   35.793549] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[   38.129138] iwlwifi 0000:01:00.0: No association and the time event is over already...
[   71.084001] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[   71.084217] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[  118.185693] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[  118.185910] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[  118.209937] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[  118.210144] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[  124.174397] iwlwifi 0000:01:00.0: No association and the time event is over already...
[  153.151555] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[  153.151772] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[  165.160036] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[  165.160253] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1340.258296] iwlwifi 0000:01:00.0: irq 61 for MSI/MSI-X
[ 1340.258601] iwlwifi 0000:01:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
[ 1340.270580] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
[ 1340.270628] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1340.270841] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1347.384442] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1347.384657] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1353.661509] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1353.661719] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1353.799948] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1353.800167] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1356.145940] iwlwifi 0000:01:00.0: No association and the time event is over already...
[ 1380.497704] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1380.497933] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S

I have had troubles with the wifi in the past (from what I read on the internet, this card is not yet fully supported everywhere) but nothing like this. Usually, disconnecting and reconnecting did the trick, sometimes I had to restart NetworkManager in extreme cases, but nothing more.

I tried a lot of things (modprobe, rfkill, firmware update, etc), rebooted everything I could but couldn't do anything. I have found bug reports and forums posts of similar problems but the solutions there either didn't work for me or the problem just seem to have disappeared for some people. I read that this card was not really supported before the kernel 3.11 or 3.13 but now I have 3.16 and it's still there. What's really bugging me is that I could successfully connect to this network a couple weeks ago...

On the Ubuntu forum, they have a script that displays useful information when posting about wireless problems. I have taken off the Ubuntu specific bits and I think this will save you some time asking me to run commands. One thing is not mentioned in the script: I use wicd.

########## wireless info START ##########

Report from: 17 Oct 2014 18:59 UTC +0000

Booted last: 17 Oct 2014 00:00 UTC +0000

Script from: 20 Sep 2014 23:04 UTC +0000

##### kernel ############################

Linux 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64 unknown unknown GNU/Linux

Parameters: rw, quiet

##### lspci #############################

01:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1] (rev 6b)
	Subsystem: Intel Corporation Dual Band Wireless-N 7260 [8086:c060]
	Kernel driver in use: iwlwifi

##### lsusb #############################

Bus 001 Device 002: ID 8087:8000 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 003: ID 8087:07dc Intel Corp. 
Bus 002 Device 002: ID 0bda:5727 Realtek Semiconductor Corp. 
Bus 002 Device 005: ID 18d1:4ee3 Google Inc. Nexus 4 (tether)
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

##### PCMCIA card info ##################

##### rfkill ############################

0: sony-wifi: Wireless LAN
	Soft blocked: no
	Hard blocked: no
1: sony-bluetooth: Bluetooth
	Soft blocked: no
	Hard blocked: no
2: nfc0: NFC
	Soft blocked: no
	Hard blocked: no
3: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no
4: hci0: Bluetooth
	Soft blocked: no
	Hard blocked: no

##### lsmod #############################

iwlmvm                161824  0 
led_class              12859  1 iwlmvm
mac80211              514630  1 iwlmvm
iwlwifi               156837  1 iwlmvm
cfg80211              454161  3 iwlwifi,mac80211,iwlmvm
rfkill                 18867  4 nfc,cfg80211,sony_laptop,bluetooth

##### ifconfig ##########################

enp0s20u2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.42.23  netmask 255.255.255.0  broadcast 192.168.42.255
        inet6 fe80::744f:54ff:febd:2e32  prefixlen 64  scopeid 0x20<link>
        ether <MAC address>  txqueuelen 1000  (Ethernet)
        RX packets 33475  bytes 45223932 (43.1 MiB)
        RX errors 1  dropped 0  overruns 0  frame 1
        TX packets 20285  bytes 2774716 (2.6 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 44  bytes 2200 (2.1 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 44  bytes 2200 (2.1 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlp1s0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether <MAC address>  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 5  bytes 876 (876.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

##### iwconfig ##########################

lo        no wireless extensions.

enp0s20u2  no wireless extensions.

wlp1s0    IEEE 802.11abg  ESSID:off/any  
          Mode:Managed  Frequency:2.437 GHz  Access Point: Not-Associated   
          Tx-Power=22 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          

##### route #############################

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.42.129  0.0.0.0         UG    203    0        0 enp0s20u2
192.168.42.0    0.0.0.0         255.255.255.0   U     203    0        0 enp0s20u2

##### resolv.conf #######################

nameserver 192.168.42.129

##### iw reg get ########################

country 00: DFS-UNSET
	(2402 - 2472 @ 40), (6, 20)
	(2457 - 2482 @ 40), (6, 20), PASSIVE-SCAN
	(2474 - 2494 @ 20), (6, 20), NO-OFDM, PASSIVE-SCAN
	(5170 - 5250 @ 160), (6, 20), PASSIVE-SCAN
	(5250 - 5330 @ 160), (6, 20), DFS, PASSIVE-SCAN
	(5490 - 5730 @ 160), (6, 20), DFS, PASSIVE-SCAN

##### iwlist channels ###################

lo        no frequency information.

enp0s20u2  no frequency information.

wlp1s0    32 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Channel 02 : 2.417 GHz
          Channel 03 : 2.422 GHz
          Channel 04 : 2.427 GHz
          Channel 05 : 2.432 GHz
          Channel 06 : 2.437 GHz
          Channel 07 : 2.442 GHz
          Channel 08 : 2.447 GHz
          Channel 09 : 2.452 GHz
          Channel 10 : 2.457 GHz
          Channel 11 : 2.462 GHz
          Channel 12 : 2.467 GHz
          Channel 13 : 2.472 GHz
          Channel 36 : 5.18 GHz
          Channel 40 : 5.2 GHz
          Channel 44 : 5.22 GHz
          Channel 48 : 5.24 GHz
          Channel 52 : 5.26 GHz
          Channel 56 : 5.28 GHz
          Channel 60 : 5.3 GHz
          Channel 64 : 5.32 GHz
          Channel 100 : 5.5 GHz
          Channel 104 : 5.52 GHz
          Channel 108 : 5.54 GHz
          Channel 112 : 5.56 GHz
          Channel 116 : 5.58 GHz
          Channel 120 : 5.6 GHz
          Channel 124 : 5.62 GHz
          Channel 128 : 5.64 GHz
          Channel 132 : 5.66 GHz
          Channel 136 : 5.68 GHz
          Channel 140 : 5.7 GHz
          Current Frequency:2.437 GHz (Channel 6)

##### iwlist scan #######################

Channel occupancy:

      1   APs on   Frequency:2.412 GHz (Channel 1)
      3   APs on   Frequency:2.437 GHz (Channel 6)

wlp1s0    Scan completed :
          Cell 01 - Address: <MAC 'Kasafe' [AC1]>
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    Quality=33/70  Signal level=-77 dBm  
                    Encryption key:on
                    ESSID:"Kasafe"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000c2d190f93f
                    Extra: Last beacon: 36ms ago
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : TKIP CCMP
                        Authentication Suites (1) : PSK
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : TKIP CCMP
                        Authentication Suites (1) : PSK
          Cell 02 - Address: <MAC 'ZyXEL' [AC2]>
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    Quality=45/70  Signal level=-65 dBm  
                    Encryption key:off
                    ESSID:"ZyXEL"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000007974f64404
                    Extra: Last beacon: 36ms ago
          Cell 03 - Address: <MAC 'HITRON-CC00' [AC3]>
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    Quality=49/70  Signal level=-61 dBm  
                    Encryption key:on
                    ESSID:"HITRON-CC00"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
                              18 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=lo        Interface doesn't support scanning.

enp0s20u2  Interface doesn't support scanning.

000000041172a69f
                    Extra: Last beacon: 36ms ago
                    IE: WPA Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
          Cell 04 - Address: <MAC 'KD WLAN Hotspot+' [AC4]>
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    Quality=51/70  Signal level=-59 dBm  
                    Encryption key:off
                    ESSID:"KD WLAN Hotspot+"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
                              18 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=000000041172acb1
                    Extra: Last beacon: 36ms ago

##### module infos ######################

[iwlmvm]
filename:       /lib/modules/3.16.4-1-ARCH/kernel/drivers/net/wireless/iwlwifi/mvm/iwlmvm.ko.gz
license:        GPL
author:         Copyright(c) 2003- 2014 Intel Corporation <ilw@linux.intel.com>
version:        in-tree:
description:    The new Intel(R) wireless AGN driver for Linux
srcversion:     D67526D799CF939C2A2C228
depends:        iwlwifi,mac80211,led-class,cfg80211
intree:         Y
vermagic:       3.16.4-1-ARCH SMP preempt mod_unload modversions 
parm:           init_dbg:set to true to debug an ASSERT in INIT fw (default: false (bool)
parm:           power_scheme:power management scheme: 1-active, 2-balanced, 3-low power, default: 2 (int)

[mac80211]
filename:       /lib/modules/3.16.4-1-ARCH/kernel/net/mac80211/mac80211.ko.gz
license:        GPL
description:    IEEE 802.11 subsystem
depends:        cfg80211
intree:         Y
vermagic:       3.16.4-1-ARCH SMP preempt mod_unload modversions 
parm:           max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm:           max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm:           beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm:           probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm:           ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)

[iwlwifi]
filename:       /lib/modules/3.16.4-1-ARCH/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko.gz
license:        GPL
author:         Copyright(c) 2003- 2014 Intel Corporation <ilw@linux.intel.com>
version:        in-tree:
description:    Intel(R) Wireless WiFi driver for Linux
firmware:       iwlwifi-100-5.ucode
firmware:       iwlwifi-1000-5.ucode
firmware:       iwlwifi-135-6.ucode
firmware:       iwlwifi-105-6.ucode
firmware:       iwlwifi-2030-6.ucode
firmware:       iwlwifi-2000-6.ucode
firmware:       iwlwifi-5150-2.ucode
firmware:       iwlwifi-5000-5.ucode
firmware:       iwlwifi-6000g2b-6.ucode
firmware:       iwlwifi-6000g2a-5.ucode
firmware:       iwlwifi-6050-5.ucode
firmware:       iwlwifi-6000-4.ucode
firmware:       iwlwifi-7265-9.ucode
firmware:       iwlwifi-3160-9.ucode
firmware:       iwlwifi-7260-9.ucode
firmware:       iwlwifi-8000-8.ucode
srcversion:     E52619966602F14805A714C
depends:        cfg80211
intree:         Y
vermagic:       3.16.4-1-ARCH SMP preempt mod_unload modversions 
parm:           swcrypto:using crypto in software (default 0 [hardware]) (int)
parm:           11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint)
parm:           amsdu_size_8K:enable 8K amsdu size (default 0) (int)
parm:           fw_restart:restart firmware in case of error (default true) (bool)
parm:           antenna_coupling:specify antenna coupling in dB (defualt: 0 dB) (int)
parm:           wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable (default: 1) (int)
parm:           nvm_file:NVM file name (charp)
parm:           uapsd_disable:disable U-APSD functionality (default: N) (bool)
parm:           bt_coex_active:enable wifi/bt co-exist (default: enable) (bool)
parm:           led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int)
parm:           power_save:enable WiFi power management (default: disable) (bool)
parm:           power_level:default power save level (range from 1 - 5, default: 1) (int)

[cfg80211]
filename:       /lib/modules/3.16.4-1-ARCH/kernel/net/wireless/cfg80211.ko.gz
description:    wireless configuration support
license:        GPL
author:         Johannes Berg
depends:        rfkill
intree:         Y
vermagic:       3.16.4-1-ARCH SMP preempt mod_unload modversions 
parm:           ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm:           cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)

##### module parameters #################

[iwlmvm]
init_dbg: N
power_scheme: 2

[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
probe_wait_ms: 500

[iwlwifi]
11n_disable: 1
amsdu_size_8K: 0
antenna_coupling: 0
bt_coex_active: Y
fw_restart: Y
led_mode: 0
nvm_file: (null)
power_level: 0
power_save: N
swcrypto: 0
uapsd_disable: N
wd_disable: 1

[cfg80211]
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00

##### /etc/modules ######################

grep: /etc/modules: No such file or directory

##### modprobe options ##################

[/etc/modprobe.d/iwlwifi.conf]
options iwlwifi 11n_disable=1

##### pm-utils ##########################

[/etc/pm/sleep.d/90alsa] (755 root)
case "$1" in
hibernate|suspend)
;;
thaw|resume)
aplay -d 1 /dev/zero
;;
*) exit $NA
;;
esac

##### udev rules ########################

grep: /etc/udev/rules.d/*net*.rules: No such file or directory

##### dmesg #############################

[    1.284399] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
[    1.284446] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[    1.466756] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    1.490496] systemd-udevd[155]: renamed network interface wlan0 to wlp1s0
[    1.630021] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[    1.832900] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[    2.896518] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[    2.907963] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   35.768085] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[   35.781194] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   35.793332] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[   35.804522] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   37.819461] wlp1s0: authenticate with <MAC 'ZyXEL' [AC2]>
[   37.821532] wlp1s0: send auth to <MAC 'ZyXEL' [AC2]> (try 1/3)
[   37.825568] wlp1s0: authenticated
[   37.828298] wlp1s0: associate with <MAC 'ZyXEL' [AC2]> (try 1/3)
[   37.830866] wlp1s0: RX AssocResp from <MAC 'ZyXEL' [AC2]> (capab=0x421 status=0 aid=6)
[   37.839183] wlp1s0: associated
[   37.839217] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[   38.129138] iwlwifi 0000:01:00.0: No association and the time event is over already...
[   38.129174] wlp1s0: Connection to AP <MAC 'ZyXEL' [AC2]> lost
[   71.084001] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[   71.096522] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  118.185693] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[  118.198363] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  118.209937] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[  118.220741] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  123.864974] wlp1s0: authenticate with <MAC 'ZyXEL' [AC2]>
[  123.867270] wlp1s0: send auth to <MAC 'ZyXEL' [AC2]> (try 1/3)
[  123.882206] wlp1s0: authenticated
[  123.884469] wlp1s0: associate with <MAC 'ZyXEL' [AC2]> (try 1/3)
[  123.887219] wlp1s0: RX AssocResp from <MAC 'ZyXEL' [AC2]> (capab=0x421 status=0 aid=6)
[  123.900889] wlp1s0: associated
[  123.900917] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[  124.174397] iwlwifi 0000:01:00.0: No association and the time event is over already...
[  124.174433] wlp1s0: Connection to AP <MAC 'ZyXEL' [AC2]> lost
[  153.151555] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[  153.163679] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  161.468177] systemd-udevd[684]: renamed network interface usb0 to enp0s20u2
[  165.160036] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[  165.172167] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

########## wireless info END ############

Thank you in advance for your help, if you need me to try anything, please ask!

Last edited by damwdan (2014-11-10 11:24:22)

Offline

#2 2014-11-03 09:52:38

adder
Member
Registered: 2010-04-12
Posts: 6

Re: [SOLVED] Intel 7260 Vaio can't connect to wifi

Hi
I just want to say that I have the exact same problem. Wireless network suddenly stopped working last week on my Sony vaio. I'm on a wired network for now, but its very annoying.
If you found a fix or somebody else knows a solution, please post an answer smile

Many thanks
greets

Offline

#3 2014-11-10 11:24:02

damwdan
Member
Registered: 2014-10-17
Posts: 4

Re: [SOLVED] Intel 7260 Vaio can't connect to wifi

Hi,

adder wrote:

If you found a fix or somebody else knows a solution, please post an answer smile

I never found out what was causing the issue but after resetting everything related to the internet box, the problem disappeared. When I say resetting, I mean hard reset of all configuration of the router and the box.

While I am very pleased to have wifi working again, it bugs me greatly that I don't exactly know what the problem was. What I did was hardly the solution. If the problem ever comes back on another network, I might not be able to do this again (access to the box, permission to reset, etc). When looking for a fix on forums, all of the posts ended with the OP saying that the problem disappeared by itself. I guess this one is not any different anymore. Sorry about that.

Hopefully you figure out how to fix your problem.

Offline

#4 2015-01-09 21:33:57

zoner
Member
Registered: 2009-07-02
Posts: 7

Re: [SOLVED] Intel 7260 Vaio can't connect to wifi

I have the exact same problem, appeared completely random. I had several restarts this Christmas on the laptop, even after upgrades. I blamed the ath driver. But I noticed when I restart the router by plugging out it from the wall, then in again, sometimes it's working.

I carefully changed every possible settings in the router, then I found if I disable IPv6 (yes, it's capable of that despite Sky does not provide IPv6 service) it started to work even after multiple reboots. It took mi a while since the new year.

I'm using connman and when it was wrong, connman was completely frozen. If I entered "connmanctl scan wifi", it never quit. Same for "connmanctl state".

I also noticed that the router LED was blinking continuously and on the laptop when I checked the connection status with ifconfig it showed very high usage of TX packets. It also blocked the whole wifi, so my phone was not able to access the internet. Strange problem, I'm unsure what caused it and not quite sure how disabling IPv6 solved it. But I'm also afraid that maybe somewhere else I can't disable IPv6 on the router.

Offline

#5 2015-01-09 22:14:55

damwdan
Member
Registered: 2014-10-17
Posts: 4

Re: [SOLVED] Intel 7260 Vaio can't connect to wifi

Hi,

On the router I was using, IPv6 was disabled from the beginning and changing this setting did not affect my computer.

I really don't know what caused the issue and as I was saying at the time...

damwdan wrote:

If the problem ever comes back on another network, I might not be able to do this again.

Well, it happened again, on the same network, but I could not get access to the router anymore, so I was stuck this time. The router set up was a little weird though and I keep thinking that it was the cause. It was a box connected to a wifi extender that broadcast an impossible to configure network that I had to connect to. This is the only network that ever caused problems, so I'm really thinking that the network was at fault, not me.

Offline

#6 2015-06-25 16:24:28

darkhan
Member
Registered: 2015-03-28
Posts: 4

Re: [SOLVED] Intel 7260 Vaio can't connect to wifi

I've had the same issue happen to me twice already. The thing that helped me was changing the channel of the wireless network (in the router settings). If it is set to auto, change it to any channel manually.

Offline

#7 2015-06-25 16:36:20

damwdan
Member
Registered: 2014-10-17
Posts: 4

Re: [SOLVED] Intel 7260 Vaio can't connect to wifi

darkhan wrote:

The thing that helped me was changing the channel of the wireless network (in the router settings). If it is set to auto, change it to any channel manually.

Good guess, I didn't think of that.


Anyways, all my problems went away a few months ago when I removed wicd (and any other NetworkManager kind of stuff) and went back to using the good old netctl tools. This might be completely unrelated, but my wifi works perfectly now.

Offline

Board footer

Powered by FluxBB