You are not logged in.
I've tried using broadcom-wl-dkms and broadcom-wl drivers from the AUR using NetworkManager and netctl,
Also blocking other drivers in a blacklist.conf
blacklist bcma
blacklist b43
blacklist b43legacy
blacklist brcm80211
blacklist ssb
I have a good connection for 1-2 min with 10 ms and then it drops a bunch packages in a row. This happens on all networks I've been on (more then 5).
But the connection keeps dropping, any idea's what i can do?
lspci | grep Network:
03:00.0 Network controller: Broadcom Corporation BCM4331 802.11a/b/g/n (rev 02)
ping statistics:
--- telia.se ping statistics ---
350 packets transmitted, 310 received, +4 errors, 11% packet loss, time 404878ms
rtt min/avg/max/mdev = 10.988/38.860/1168.563/136.520 ms, pipe 4
iwconfig:
wlp3s0 IEEE 802.11abg ESSID:"Basement"
Mode:Managed Frequency:2.437 GHz Access Point: E0:91:F5:FE:F6:26
Bit Rate=78 Mb/s Tx-Power=200 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=70/70 Signal level=8 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
No dmesg error output.
Thanks
Rawa
Last edited by rawa (2014-10-24 15:30:07)
Offline