You are not logged in.

#1 2015-03-19 21:53:02

15goudreau
Member
Registered: 2014-06-19
Posts: 86

[solved] Xorg quits after 'startx' no error message

Hi guys,

So I'm a little perplexed. One day my system just started quitting xorg. I had it to startx upon login, but that would just flash my monitors black and then return my to a login prompt. So I went in and tried to analyse the log file but I didn't have much luck. I'm going to post it here and hopefully you guys can point me in the right direction.

[   567.631] 
X.Org X Server 1.17.1
Release Date: 2015-02-10
[   567.632] X Protocol Version 11, Revision 0
[   567.633] Build Operating System: Linux 3.18.6-1-ARCH x86_64 
[   567.634] Current Operating System: Linux taylorsarch 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64
[   567.634] Kernel command line: \boot\vmlinuz-linux ro root=UUID=830d6c13-b8af-4b77-8f6e-058cefb7f0f7    initrd=boot\initramfs-linux.img
[   567.635] Build Date: 14 March 2015  06:45:50PM
[   567.636]  
[   567.636] Current version of pixman: 0.32.6
[   567.638] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   567.638] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   567.641] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 19 17:39:36 2015
[   567.641] (==) Using config file: "/etc/xorg.conf"
[   567.642] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   567.643] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   567.643] (==) ServerLayout "Layout0"
[   567.643] (**) |-->Screen "Screen0" (0)
[   567.643] (**) |   |-->Monitor "Monitor0"
[   567.643] (**) |   |-->Device "Device0"
[   567.643] (**) |-->Input Device "Keyboard0"
[   567.643] (**) |-->Input Device "Mouse0"
[   567.643] (==) Automatically adding devices
[   567.643] (==) Automatically enabling devices
[   567.643] (==) Automatically adding GPU devices
[   567.643] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[   567.643] 	Entry deleted from font path.
[   567.643] 	(Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[   567.643] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   567.643] 	Entry deleted from font path.
[   567.643] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   567.643] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   567.643] 	Entry deleted from font path.
[   567.643] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   567.643] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[   567.643] (==) ModulePath set to "/usr/lib/xorg/modules"
[   567.643] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   567.643] (WW) Disabling Keyboard0
[   567.643] (WW) Disabling Mouse0
[   567.643] (II) Loader magic: 0x815d80
[   567.643] (II) Module ABI versions:
[   567.643] 	X.Org ANSI C Emulation: 0.4
[   567.643] 	X.Org Video Driver: 19.0
[   567.643] 	X.Org XInput driver : 21.0
[   567.643] 	X.Org Server Extension : 9.0
[   567.646] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c16
[   567.646] (II) xfree86: Adding drm device (/dev/dri/card0)
[   567.646] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[   567.646] (II) xfree86: Adding drm device (/dev/dri/card1)
[   567.647] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 9 paused 0
[   567.650] (--) PCI:*(0:1:0:0) 10de:11c0:3842:2660 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[   567.650] (--) PCI: (0:2:0:0) 10de:11c0:3842:2662 rev 161, Mem @ 0xf8000000/16777216, 0xc0000000/134217728, 0xc8000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[   567.650] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   567.650] (II) LoadModule: "glx"
[   567.651] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   567.657] (II) Module glx: vendor="NVIDIA Corporation"
[   567.658] 	compiled for 4.0.2, module version = 1.0.0
[   567.658] 	Module class: X.Org Server Extension
[   567.658] (II) NVIDIA GLX Module  304.125  Mon Dec  1 20:22:48 PST 2014
[   567.658] (II) LoadModule: "nvidia"
[   567.658] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   567.658] (II) Module nvidia: vendor="NVIDIA Corporation"
[   567.658] 	compiled for 4.0.2, module version = 1.0.0
[   567.658] 	Module class: X.Org Video Driver
[   567.658] (II) NVIDIA dlloader X Driver  304.125  Mon Dec  1 20:00:30 PST 2014
[   567.658] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   567.658] (++) using VT number 1

[   567.658] (--) controlling tty is VT number 1, auto-enabling KeepTty
[   567.658] (II) Loading sub module "fb"
[   567.658] (II) LoadModule: "fb"
[   567.658] (II) Loading /usr/lib/xorg/modules/libfb.so
[   567.658] (II) Module fb: vendor="X.Org Foundation"
[   567.658] 	compiled for 1.17.1, module version = 1.0.0
[   567.658] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   567.659] (II) Loading sub module "wfb"
[   567.659] (II) LoadModule: "wfb"
[   567.659] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   567.659] (II) Module wfb: vendor="X.Org Foundation"
[   567.659] 	compiled for 1.17.1, module version = 1.0.0
[   567.659] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   567.659] (II) Loading sub module "ramdac"
[   567.659] (II) LoadModule: "ramdac"
[   567.659] (II) Module "ramdac" already built-in
[   567.659] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[   567.659] (==) NVIDIA(0): RGB weight 888
[   567.659] (==) NVIDIA(0): Default visual is TrueColor
[   567.659] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   567.659] (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0 { ForceFullCompositionPipeline = On }"
[   567.659] (**) NVIDIA(0): Enabling 2D acceleration
[   568.126] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VH238 (DFP-0)) does not
[   568.126] (II) NVIDIA(GPU-0):     support NVIDIA 3D Vision stereo.
[   568.131] (II) NVIDIA(GPU-0): Display (DELL 2005FPW (DFP-3)) does not support NVIDIA 3D
[   568.131] (II) NVIDIA(GPU-0):     Vision stereo.
[   568.132] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 660 (GK106) at PCI:1:0:0 (GPU-0)
[   568.132] (--) NVIDIA(0): Memory: 2097152 kBytes
[   568.132] (--) NVIDIA(0): VideoBIOS: 80.06.58.00.60
[   568.132] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[   568.132] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[   568.138] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 660 at PCI:1:0:0
[   568.139] (--) NVIDIA(0):     CRT-0
[   568.139] (--) NVIDIA(0):     Ancor Communications Inc ASUS VH238 (DFP-0) (connected)
[   568.139] (--) NVIDIA(0):     DFP-1
[   568.139] (--) NVIDIA(0):     DFP-2
[   568.139] (--) NVIDIA(0):     DELL 2005FPW (DFP-3) (connected)
[   568.139] (--) NVIDIA(0):     DFP-4
[   568.139] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[   568.139] (--) NVIDIA(0): Ancor Communications Inc ASUS VH238 (DFP-0): 330.0 MHz maximum pixel clock
[   568.139] (--) NVIDIA(0): Ancor Communications Inc ASUS VH238 (DFP-0): Internal Dual Link TMDS
[   568.139] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[   568.139] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[   568.139] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
[   568.139] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[   568.139] (--) NVIDIA(0): DELL 2005FPW (DFP-3): 330.0 MHz maximum pixel clock
[   568.139] (--) NVIDIA(0): DELL 2005FPW (DFP-3): Internal Dual Link TMDS
[   568.139] (--) NVIDIA(0): DFP-4: 960.0 MHz maximum pixel clock
[   568.139] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[   568.139] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   568.139] (**) NVIDIA(0):     device Ancor Communications Inc ASUS VH238 (DFP-0) (Using
[   568.139] (**) NVIDIA(0):     EDID frequencies has been enabled on all display
[   568.139] (**) NVIDIA(0):     devices.)
[   568.141] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   568.141] (**) NVIDIA(0):     device DELL 2005FPW (DFP-3) (Using EDID frequencies has
[   568.141] (**) NVIDIA(0):     been enabled on all display devices.)
[   568.142] (II) NVIDIA(0): Validated MetaModes:
[   568.142] (II) NVIDIA(0):     "nvidia-auto-select+0+0{ForceFullCompositionPipeline=On}"
[   568.142] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[   568.170] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[   568.170] (--) NVIDIA(0):     option
[   568.170] (--) Depth 24 pixmap format is 32 bpp
[   568.516] (II) NVIDIA(GPU-1): NVIDIA GPU GeForce GTX 660 (GK106) at PCI:2:0:0 (GPU-1)
[   568.516] (--) NVIDIA(GPU-1): Memory: 2097152 kBytes
[   568.516] (--) NVIDIA(GPU-1): VideoBIOS: 80.06.58.00.60
[   568.516] (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X
[   568.516] (--) NVIDIA(GPU-1): Interlaced video modes are supported on this GPU
[   568.516] (--) NVIDIA(GPU-1): Valid display device(s) on GeForce GTX 660 at PCI:2:0:0
[   568.516] (--) NVIDIA(GPU-1):     CRT-0
[   568.516] (--) NVIDIA(GPU-1):     DFP-0
[   568.516] (--) NVIDIA(GPU-1):     DFP-1
[   568.516] (--) NVIDIA(GPU-1):     DFP-2
[   568.516] (--) NVIDIA(GPU-1):     DFP-3
[   568.516] (--) NVIDIA(GPU-1):     DFP-4
[   568.516] (--) NVIDIA(GPU-1): CRT-0: 400.0 MHz maximum pixel clock
[   568.516] (--) NVIDIA(GPU-1): DFP-0: 330.0 MHz maximum pixel clock
[   568.516] (--) NVIDIA(GPU-1): DFP-0: Internal Single Link TMDS
[   568.516] (--) NVIDIA(GPU-1): DFP-1: 165.0 MHz maximum pixel clock
[   568.516] (--) NVIDIA(GPU-1): DFP-1: Internal Single Link TMDS
[   568.516] (--) NVIDIA(GPU-1): DFP-2: 165.0 MHz maximum pixel clock
[   568.516] (--) NVIDIA(GPU-1): DFP-2: Internal Single Link TMDS
[   568.516] (--) NVIDIA(GPU-1): DFP-3: 330.0 MHz maximum pixel clock
[   568.516] (--) NVIDIA(GPU-1): DFP-3: Internal Single Link TMDS
[   568.516] (--) NVIDIA(GPU-1): DFP-4: 400.0 MHz maximum pixel clock
[   568.516] (--) NVIDIA(GPU-1): DFP-4: Internal DisplayPort
[   568.516] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[   568.516] (II) NVIDIA:     access.
[   568.521] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[   568.521] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[   568.521] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[   568.521] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[   568.521] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[   568.521] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[   568.521] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[   568.521] (II) NVIDIA(0):     Config Options in the README.
[   568.527] (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0{ForceFullCompositionPipeline=On}"
[   568.588] (==) NVIDIA(0): Disabling shared memory pixmaps
[   568.588] (==) NVIDIA(0): Backing store enabled
[   568.588] (==) NVIDIA(0): Silken mouse enabled
[   568.588] (**) NVIDIA(0): DPMS enabled
[   568.588] (II) Loading sub module "dri2"
[   568.588] (II) LoadModule: "dri2"
[   568.588] (II) Module "dri2" already built-in
[   568.588] (II) NVIDIA(0): [DRI2] Setup complete
[   568.588] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[   568.588] (--) RandR disabled
[   568.592] (II) Initializing extension GLX
[   568.592] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event5)
[   568.618] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   568.618] (**) Power Button: Applying InputClass "system-keyboard"
[   568.618] (II) LoadModule: "evdev"
[   568.619] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   568.619] (II) Module evdev: vendor="X.Org Foundation"
[   568.619] 	compiled for 1.16.2, module version = 2.9.1
[   568.619] 	Module class: X.Org XInput Driver
[   568.619] 	ABI class: X.Org XInput driver, version 21.0
[   568.619] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 36 paused 0
[   568.619] (II) Using input driver 'evdev' for 'Power Button'
[   568.619] (**) Power Button: always reports core events
[   568.619] (**) evdev: Power Button: Device: "/dev/input/event5"
[   568.619] (--) evdev: Power Button: Vendor 0 Product 0x1
[   568.619] (--) evdev: Power Button: Found keys
[   568.619] (II) evdev: Power Button: Configuring as keyboard
[   568.619] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[   568.619] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   568.619] (**) Option "xkb_rules" "evdev"
[   568.619] (**) Option "xkb_model" "pc104"
[   568.619] (**) Option "xkb_layout" "dvorak"
[   568.647] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[   568.647] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   568.647] (**) Power Button: Applying InputClass "system-keyboard"
[   568.648] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 37 paused 0
[   568.648] (II) Using input driver 'evdev' for 'Power Button'
[   568.648] (**) Power Button: always reports core events
[   568.648] (**) evdev: Power Button: Device: "/dev/input/event4"
[   568.648] (--) evdev: Power Button: Vendor 0 Product 0x1
[   568.648] (--) evdev: Power Button: Found keys
[   568.648] (II) evdev: Power Button: Configuring as keyboard
[   568.648] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event4"
[   568.648] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[   568.648] (**) Option "xkb_rules" "evdev"
[   568.648] (**) Option "xkb_model" "pc104"
[   568.648] (**) Option "xkb_layout" "dvorak"
[   568.648] (II) config/udev: Adding input device USB full speed gaming keyboard (/dev/input/event2)
[   568.648] (**) USB full speed gaming keyboard: Applying InputClass "evdev keyboard catchall"
[   568.648] (**) USB full speed gaming keyboard: Applying InputClass "system-keyboard"
[   568.648] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 38 paused 0
[   568.648] (II) Using input driver 'evdev' for 'USB full speed gaming keyboard'
[   568.648] (**) USB full speed gaming keyboard: always reports core events
[   568.648] (**) evdev: USB full speed gaming keyboard: Device: "/dev/input/event2"
[   568.648] (--) evdev: USB full speed gaming keyboard: Vendor 0x60b Product 0x6251
[   568.648] (--) evdev: USB full speed gaming keyboard: Found keys
[   568.648] (II) evdev: USB full speed gaming keyboard: Configuring as keyboard
[   568.648] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7.4/4-1.7.4:1.0/0003:060B:6251.0003/input/input4/event2"
[   568.648] (II) XINPUT: Adding extended input device "USB full speed gaming keyboard" (type: KEYBOARD, id 8)
[   568.648] (**) Option "xkb_rules" "evdev"
[   568.648] (**) Option "xkb_model" "pc104"
[   568.648] (**) Option "xkb_layout" "dvorak"
[   568.649] (II) config/udev: Adding input device USB full speed gaming keyboard (/dev/input/event3)
[   568.649] (**) USB full speed gaming keyboard: Applying InputClass "evdev keyboard catchall"
[   568.649] (**) USB full speed gaming keyboard: Applying InputClass "system-keyboard"
[   568.649] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 39 paused 0
[   568.649] (II) Using input driver 'evdev' for 'USB full speed gaming keyboard'
[   568.649] (**) USB full speed gaming keyboard: always reports core events
[   568.649] (**) evdev: USB full speed gaming keyboard: Device: "/dev/input/event3"
[   568.649] (--) evdev: USB full speed gaming keyboard: Vendor 0x60b Product 0x6251
[   568.649] (--) evdev: USB full speed gaming keyboard: Found 1 mouse buttons
[   568.649] (--) evdev: USB full speed gaming keyboard: Found scroll wheel(s)
[   568.649] (--) evdev: USB full speed gaming keyboard: Found relative axes
[   568.649] (II) evdev: USB full speed gaming keyboard: Forcing relative x/y axes to exist.
[   568.649] (--) evdev: USB full speed gaming keyboard: Found absolute axes
[   568.649] (II) evdev: USB full speed gaming keyboard: Forcing absolute x/y axes to exist.
[   568.649] (--) evdev: USB full speed gaming keyboard: Found keys
[   568.649] (II) evdev: USB full speed gaming keyboard: Configuring as mouse
[   568.649] (II) evdev: USB full speed gaming keyboard: Configuring as keyboard
[   568.649] (II) evdev: USB full speed gaming keyboard: Adding scrollwheel support
[   568.649] (**) evdev: USB full speed gaming keyboard: YAxisMapping: buttons 4 and 5
[   568.649] (**) evdev: USB full speed gaming keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   568.649] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7.4/4-1.7.4:1.1/0003:060B:6251.0004/input/input5/event3"
[   568.649] (II) XINPUT: Adding extended input device "USB full speed gaming keyboard" (type: KEYBOARD, id 9)
[   568.649] (**) Option "xkb_rules" "evdev"
[   568.649] (**) Option "xkb_model" "pc104"
[   568.649] (**) Option "xkb_layout" "dvorak"
[   568.649] (II) evdev: USB full speed gaming keyboard: initialized for relative axes.
[   568.649] (WW) evdev: USB full speed gaming keyboard: ignoring absolute axes.
[   568.649] (**) USB full speed gaming keyboard: (accel) keeping acceleration scheme 1
[   568.649] (**) USB full speed gaming keyboard: (accel) acceleration profile 0
[   568.650] (**) USB full speed gaming keyboard: (accel) acceleration factor: 2.000
[   568.650] (**) USB full speed gaming keyboard: (accel) acceleration threshold: 4
[   568.650] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event0)
[   568.650] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[   568.703] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 40 paused 0
[   568.703] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   568.703] (**) Logitech USB Receiver: always reports core events
[   568.703] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event0"
[   568.703] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc531
[   568.703] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[   568.703] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[   568.703] (--) evdev: Logitech USB Receiver: Found relative axes
[   568.703] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[   568.703] (II) evdev: Logitech USB Receiver: Configuring as mouse
[   568.703] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[   568.703] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[   568.703] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   568.703] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8:1.0/0003:046D:C531.0001/input/input2/event0"
[   568.703] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[   568.703] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[   568.703] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[   568.703] (**) Logitech USB Receiver: (accel) acceleration profile 0
[   568.703] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   568.703] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   568.704] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[   568.704] (II) No input driver specified, ignoring this device.
[   568.704] (II) This device may have been added with another device file.
[   568.704] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[   568.704] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[   568.704] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
[   568.704] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 41 paused 0
[   568.704] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   568.704] (**) Logitech USB Receiver: always reports core events
[   568.704] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[   568.704] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc531
[   568.704] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[   568.704] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[   568.704] (--) evdev: Logitech USB Receiver: Found relative axes
[   568.704] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[   568.704] (--) evdev: Logitech USB Receiver: Found absolute axes
[   568.704] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[   568.704] (--) evdev: Logitech USB Receiver: Found keys
[   568.704] (II) evdev: Logitech USB Receiver: Configuring as mouse
[   568.704] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[   568.704] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[   568.704] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[   568.704] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   568.705] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8:1.1/0003:046D:C531.0002/input/input3/event1"
[   568.705] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[   568.705] (**) Option "xkb_rules" "evdev"
[   568.705] (**) Option "xkb_model" "pc104"
[   568.705] (**) Option "xkb_layout" "dvorak"
[   568.705] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[   568.705] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[   568.705] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[   568.705] (**) Logitech USB Receiver: (accel) acceleration profile 0
[   568.705] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   568.705] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   568.705] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[   568.705] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[   568.705] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
[   568.705] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 42 paused 0
[   568.706] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[   568.706] (**) Eee PC WMI hotkeys: always reports core events
[   568.706] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event7"
[   568.706] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[   568.706] (--) evdev: Eee PC WMI hotkeys: Found keys
[   568.706] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[   568.706] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input10/event7"
[   568.706] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
[   568.706] (**) Option "xkb_rules" "evdev"
[   568.706] (**) Option "xkb_model" "pc104"
[   568.706] (**) Option "xkb_layout" "dvorak"
[   568.706] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[   568.706] (II) No input driver specified, ignoring this device.
[   568.706] (II) This device may have been added with another device file.
[   568.748] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VH238 (DFP-0)) does not
[   568.748] (II) NVIDIA(GPU-0):     support NVIDIA 3D Vision stereo.
[   568.748] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   568.748] (**) NVIDIA(0):     device Ancor Communications Inc ASUS VH238 (DFP-0) (Using
[   568.748] (**) NVIDIA(0):     EDID frequencies has been enabled on all display
[   568.748] (**) NVIDIA(0):     devices.)
[   568.756] (II) NVIDIA(GPU-0): Display (DELL 2005FPW (DFP-3)) does not support NVIDIA 3D
[   568.756] (II) NVIDIA(GPU-0):     Vision stereo.
[   568.756] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   568.756] (**) NVIDIA(0):     device DELL 2005FPW (DFP-3) (Using EDID frequencies has
[   568.756] (**) NVIDIA(0):     been enabled on all display devices.)
[   568.830] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1920x1080 +0+600"
[   568.899] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1920x1080 +0+600, DVI-D-0: nvidia-auto-select @1050x1680 +1920+0 {Rotation=90}"
[   569.028] (II) evdev: Eee PC WMI hotkeys: Close
[   569.028] (II) UnloadModule: "evdev"
[   569.028] (II) systemd-logind: releasing fd for 13:71
[   569.103] (II) evdev: Logitech USB Receiver: Close
[   569.103] (II) UnloadModule: "evdev"
[   569.103] (II) systemd-logind: releasing fd for 13:65
[   569.156] (II) evdev: Logitech USB Receiver: Close
[   569.156] (II) UnloadModule: "evdev"
[   569.156] (II) systemd-logind: releasing fd for 13:64
[   569.210] (II) evdev: USB full speed gaming keyboard: Close
[   569.210] (II) UnloadModule: "evdev"
[   569.210] (II) systemd-logind: releasing fd for 13:67
[   569.263] (II) evdev: USB full speed gaming keyboard: Close
[   569.263] (II) UnloadModule: "evdev"
[   569.263] (II) systemd-logind: releasing fd for 13:66
[   569.316] (II) evdev: Power Button: Close
[   569.316] (II) UnloadModule: "evdev"
[   569.316] (II) systemd-logind: releasing fd for 13:68
[   569.343] (II) evdev: Power Button: Close
[   569.343] (II) UnloadModule: "evdev"
[   569.343] (II) systemd-logind: releasing fd for 13:69
[   569.688] (II) Server terminated successfully (0). Closing log file.

I have my system fully up to date, I really have no idea why one day it would just stop working.

I saw that at line 568.521 there was a failure of ACPI but I really am not sure how that would affect my system.

Only thing I can think of in conjunction with this issue, is that I setup my foldingathome client to be enabled in systemctl. It started making weird graph glitches in my tty so I disabled it. Not sure if they are linked or not.

Thanks!

Last edited by 15goudreau (2015-03-29 15:17:53)

Offline

#2 2015-03-19 22:33:33

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 29,194
Website

Re: [solved] Xorg quits after 'startx' no error message

Please paste your .xinitrc. What driver are you using?


Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#3 2015-03-20 02:48:53

15goudreau
Member
Registered: 2014-06-19
Posts: 86

Re: [solved] Xorg quits after 'startx' no error message

.xinitrc

#!/bin/sh
#
# ~/.xinitrc
#
# Executed by startx (run your window manager from here)

if [ -d /etc/X11/xinit/xinitrc.d ]; then
  for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
  done
  unset f
fi
setxkbmap dvorak
xrandr --output DVI-D-0 --mode 1680x1050 --pos 1920x0 --rotate left --output HDMI-0 --off --output DVI-I-1 --mode 1920x1080 --pos 0x600 --rotate normal --output DVI-I-0 --off --output DP-1 --off --output DP-0 --off
numlockx &
sh ~/.fehbg &
#compton -b --backend xrender --config /dev/null
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
exec i3

drivers are nvidia 304

Offline

#4 2015-03-20 09:01:58

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 12,186

Re: [solved] Xorg quits after 'startx' no error message

Why are your drivers that low? Your card is still supported by the latest nvidia drivers, don't know if there is a direct correlation with your problem, but there's no reason for you to be using that old of a driver

Offline

#5 2015-03-20 12:08:40

15goudreau
Member
Registered: 2014-06-19
Posts: 86

Re: [solved] Xorg quits after 'startx' no error message

I didn't actually realize until now that there were updated drivers. I will update those and report back.

Offline

#6 2015-03-20 12:15:44

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: [solved] Xorg quits after 'startx' no error message

Please see https://wiki.archlinux.org/index.php/NVIDIA#Installing for how to determine the correct driver for your card.
If you get confused, blame nvidia ;P

Offline

#7 2015-03-22 16:06:18

15goudreau
Member
Registered: 2014-06-19
Posts: 86

Re: [solved] Xorg quits after 'startx' no error message

I uninstalled nvidia-304xx and installed nvidia with needed dependencies. This is the output I get from running 'startx'. It does the exact same thing, looks like it's going to load screen flickers and then kicks me back saying it was terminated successfully.

[    15.795] 
X.Org X Server 1.17.1
Release Date: 2015-02-10
[    15.796] X Protocol Version 11, Revision 0
[    15.796] Build Operating System: Linux 3.18.6-1-ARCH x86_64 
[    15.796] Current Operating System: Linux taylorsarch 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64
[    15.796] Kernel command line: \boot\vmlinuz-linux ro root=UUID=830d6c13-b8af-4b77-8f6e-058cefb7f0f7    initrd=boot\initramfs-linux.img
[    15.796] Build Date: 14 March 2015  06:45:50PM
[    15.796]  
[    15.796] Current version of pixman: 0.32.6
[    15.796] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    15.796] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.796] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 22 11:59:26 2015
[    15.799] (==) Using config file: "/etc/xorg.conf"
[    15.799] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    15.799] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    15.801] (==) ServerLayout "Layout0"
[    15.801] (**) |-->Screen "Screen0" (0)
[    15.801] (**) |   |-->Monitor "Monitor0"
[    15.801] (**) |   |-->Device "Device0"
[    15.801] (**) |-->Input Device "Keyboard0"
[    15.801] (**) |-->Input Device "Mouse0"
[    15.801] (==) Automatically adding devices
[    15.801] (==) Automatically enabling devices
[    15.801] (==) Automatically adding GPU devices
[    15.803] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[    15.803] 	Entry deleted from font path.
[    15.803] 	(Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[    15.805] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    15.805] 	Entry deleted from font path.
[    15.805] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    15.805] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    15.805] 	Entry deleted from font path.
[    15.805] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    15.805] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    15.805] (==) ModulePath set to "/usr/lib/xorg/modules"
[    15.805] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    15.805] (WW) Disabling Keyboard0
[    15.805] (WW) Disabling Mouse0
[    15.805] (II) Loader magic: 0x815d80
[    15.805] (II) Module ABI versions:
[    15.805] 	X.Org ANSI C Emulation: 0.4
[    15.805] 	X.Org Video Driver: 19.0
[    15.805] 	X.Org XInput driver : 21.0
[    15.805] 	X.Org Server Extension : 9.0
[    15.808] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[    15.808] (II) xfree86: Adding drm device (/dev/dri/card0)
[    15.808] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[    15.809] (II) xfree86: Adding drm device (/dev/dri/card1)
[    15.809] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 9 paused 0
[    15.813] (--) PCI:*(0:1:0:0) 10de:11c0:3842:2660 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    15.813] (--) PCI: (0:2:0:0) 10de:11c0:3842:2662 rev 161, Mem @ 0xf8000000/16777216, 0xc0000000/134217728, 0xc8000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[    15.813] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    15.813] (II) LoadModule: "glx"
[    15.818] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    15.905] (II) Module glx: vendor="NVIDIA Corporation"
[    15.905] 	compiled for 4.0.2, module version = 1.0.0
[    15.905] 	Module class: X.Org Server Extension
[    15.906] (II) NVIDIA GLX Module  346.47  Thu Feb 19 18:09:07 PST 2015
[    15.906] (II) LoadModule: "nvidia"
[    15.906] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    15.912] (II) Module nvidia: vendor="NVIDIA Corporation"
[    15.912] 	compiled for 4.0.2, module version = 1.0.0
[    15.912] 	Module class: X.Org Video Driver
[    15.913] (II) NVIDIA dlloader X Driver  346.47  Thu Feb 19 17:47:18 PST 2015
[    15.913] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    15.913] (++) using VT number 1

[    15.913] (--) controlling tty is VT number 1, auto-enabling KeepTty
[    15.914] (II) Loading sub module "fb"
[    15.914] (II) LoadModule: "fb"
[    15.914] (II) Loading /usr/lib/xorg/modules/libfb.so
[    15.915] (II) Module fb: vendor="X.Org Foundation"
[    15.915] 	compiled for 1.17.1, module version = 1.0.0
[    15.915] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    15.915] (II) Loading sub module "wfb"
[    15.915] (II) LoadModule: "wfb"
[    15.915] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    15.916] (II) Module wfb: vendor="X.Org Foundation"
[    15.916] 	compiled for 1.17.1, module version = 1.0.0
[    15.916] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    15.916] (II) Loading sub module "ramdac"
[    15.916] (II) LoadModule: "ramdac"
[    15.916] (II) Module "ramdac" already built-in
[    15.918] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    15.918] (==) NVIDIA(0): RGB weight 888
[    15.918] (==) NVIDIA(0): Default visual is TrueColor
[    15.918] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    15.919] (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0 { ForceFullCompositionPipeline = On }"
[    15.919] (**) NVIDIA(0): Enabling 2D acceleration
[    16.497] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[    16.498] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 660 (GK106) at PCI:1:0:0 (GPU-0)
[    16.498] (--) NVIDIA(0): Memory: 2097152 kBytes
[    16.498] (--) NVIDIA(0): VideoBIOS: 80.06.58.00.60
[    16.498] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    16.510] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 660 at PCI:1:0:0
[    16.510] (--) NVIDIA(0):     CRT-0
[    16.510] (--) NVIDIA(0):     Ancor Communications Inc ASUS VH238 (DFP-0) (boot, connected)
[    16.510] (--) NVIDIA(0):     DFP-1
[    16.510] (--) NVIDIA(0):     DFP-2
[    16.510] (--) NVIDIA(0):     DELL 2005FPW (DFP-3) (connected)
[    16.510] (--) NVIDIA(0):     DFP-4
[    16.510] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    16.510] (--) NVIDIA(0): Ancor Communications Inc ASUS VH238 (DFP-0): Internal TMDS
[    16.510] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VH238 (DFP-0): 330.0 MHz maximum pixel clock
[    16.510] (--) NVIDIA(0): DFP-1: Internal TMDS
[    16.510] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    16.510] (--) NVIDIA(0): DFP-2: Internal TMDS
[    16.510] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[    16.510] (--) NVIDIA(0): DELL 2005FPW (DFP-3): Internal TMDS
[    16.510] (--) NVIDIA(GPU-0): DELL 2005FPW (DFP-3): 330.0 MHz maximum pixel clock
[    16.510] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[    16.510] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[    16.510] (**) NVIDIA(0): Option "Rotate" "left"
[    16.510] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    16.510] (**) NVIDIA(0):     device Ancor Communications Inc ASUS VH238 (DFP-0) (Using
[    16.511] (**) NVIDIA(0):     EDID frequencies has been enabled on all display
[    16.511] (**) NVIDIA(0):     devices.)
[    16.512] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    16.512] (**) NVIDIA(0):     device DELL 2005FPW (DFP-3) (Using EDID frequencies has
[    16.512] (**) NVIDIA(0):     been enabled on all display devices.)
[    16.513] (II) NVIDIA(0): Validated MetaModes:
[    16.513] (II) NVIDIA(0):     "nvidia-auto-select+0+0{ForceFullCompositionPipeline=On}"
[    16.513] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    16.539] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[    16.539] (--) NVIDIA(0):     option
[    16.539] (--) Depth 24 pixmap format is 32 bpp
[    16.999] (II) NVIDIA(GPU-1): Found DRM driver nvidia-drm (20150116)
[    17.012] (II) NVIDIA(GPU-1): NVIDIA GPU GeForce GTX 660 (GK106) at PCI:2:0:0 (GPU-1)
[    17.012] (--) NVIDIA(GPU-1): Memory: 2097152 kBytes
[    17.012] (--) NVIDIA(GPU-1): VideoBIOS: 80.06.58.00.60
[    17.012] (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X
[    17.012] (--) NVIDIA(GPU-1): Valid display device(s) on GeForce GTX 660 at PCI:2:0:0
[    17.012] (--) NVIDIA(GPU-1):     CRT-0
[    17.012] (--) NVIDIA(GPU-1):     DFP-0
[    17.012] (--) NVIDIA(GPU-1):     DFP-1
[    17.012] (--) NVIDIA(GPU-1):     DFP-2
[    17.012] (--) NVIDIA(GPU-1):     DFP-3
[    17.012] (--) NVIDIA(GPU-1):     DFP-4
[    17.012] (--) NVIDIA(GPU-1): CRT-0: 400.0 MHz maximum pixel clock
[    17.012] (--) NVIDIA(GPU-1): DFP-0: Internal TMDS
[    17.012] (--) NVIDIA(GPU-1): DFP-0: 330.0 MHz maximum pixel clock
[    17.012] (--) NVIDIA(GPU-1): DFP-1: Internal TMDS
[    17.012] (--) NVIDIA(GPU-1): DFP-1: 165.0 MHz maximum pixel clock
[    17.012] (--) NVIDIA(GPU-1): DFP-2: Internal TMDS
[    17.012] (--) NVIDIA(GPU-1): DFP-2: 165.0 MHz maximum pixel clock
[    17.012] (--) NVIDIA(GPU-1): DFP-3: Internal TMDS
[    17.012] (--) NVIDIA(GPU-1): DFP-3: 330.0 MHz maximum pixel clock
[    17.012] (--) NVIDIA(GPU-1): DFP-4: Internal DisplayPort
[    17.012] (--) NVIDIA(GPU-1): DFP-4: 400.0 MHz maximum pixel clock
[    17.012] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[    17.012] (II) NVIDIA:     access.
[    17.015] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    17.015] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    17.015] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    17.015] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    17.015] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    17.015] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    17.015] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    17.015] (II) NVIDIA(0):     Config Options in the README.
[    17.024] (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0{ForceFullCompositionPipeline=On}"
[    17.116] (==) NVIDIA(0): Disabling shared memory pixmaps
[    17.116] (==) NVIDIA(0): Backing store enabled
[    17.116] (==) NVIDIA(0): Silken mouse enabled
[    17.116] (**) NVIDIA(0): DPMS enabled
[    17.117] (II) Loading sub module "dri2"
[    17.117] (II) LoadModule: "dri2"
[    17.117] (II) Module "dri2" already built-in
[    17.117] (II) NVIDIA(0): [DRI2] Setup complete
[    17.117] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    17.117] (--) RandR disabled
[    17.120] (II) Initializing extension GLX
[    17.120] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event5)
[    17.174] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    17.174] (**) Power Button: Applying InputClass "system-keyboard"
[    17.174] (II) LoadModule: "evdev"
[    17.174] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    17.177] (II) Module evdev: vendor="X.Org Foundation"
[    17.177] 	compiled for 1.16.2, module version = 2.9.1
[    17.177] 	Module class: X.Org XInput Driver
[    17.177] 	ABI class: X.Org XInput driver, version 21.0
[    17.177] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 41 paused 0
[    17.177] (II) Using input driver 'evdev' for 'Power Button'
[    17.177] (**) Power Button: always reports core events
[    17.177] (**) evdev: Power Button: Device: "/dev/input/event5"
[    17.177] (--) evdev: Power Button: Vendor 0 Product 0x1
[    17.177] (--) evdev: Power Button: Found keys
[    17.177] (II) evdev: Power Button: Configuring as keyboard
[    17.177] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[    17.177] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    17.177] (**) Option "xkb_rules" "evdev"
[    17.177] (**) Option "xkb_model" "pc104"
[    17.177] (**) Option "xkb_layout" "dvorak"
[    17.197] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    17.197] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    17.197] (**) Power Button: Applying InputClass "system-keyboard"
[    17.197] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 42 paused 0
[    17.197] (II) Using input driver 'evdev' for 'Power Button'
[    17.197] (**) Power Button: always reports core events
[    17.197] (**) evdev: Power Button: Device: "/dev/input/event4"
[    17.197] (--) evdev: Power Button: Vendor 0 Product 0x1
[    17.197] (--) evdev: Power Button: Found keys
[    17.197] (II) evdev: Power Button: Configuring as keyboard
[    17.197] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event4"
[    17.197] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    17.197] (**) Option "xkb_rules" "evdev"
[    17.197] (**) Option "xkb_model" "pc104"
[    17.197] (**) Option "xkb_layout" "dvorak"
[    17.198] (II) config/udev: Adding input device USB full speed gaming keyboard (/dev/input/event2)
[    17.198] (**) USB full speed gaming keyboard: Applying InputClass "evdev keyboard catchall"
[    17.198] (**) USB full speed gaming keyboard: Applying InputClass "system-keyboard"
[    17.198] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 43 paused 0
[    17.198] (II) Using input driver 'evdev' for 'USB full speed gaming keyboard'
[    17.198] (**) USB full speed gaming keyboard: always reports core events
[    17.198] (**) evdev: USB full speed gaming keyboard: Device: "/dev/input/event2"
[    17.198] (--) evdev: USB full speed gaming keyboard: Vendor 0x60b Product 0x6251
[    17.198] (--) evdev: USB full speed gaming keyboard: Found keys
[    17.198] (II) evdev: USB full speed gaming keyboard: Configuring as keyboard
[    17.198] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7.4/4-1.7.4:1.0/0003:060B:6251.0003/input/input4/event2"
[    17.198] (II) XINPUT: Adding extended input device "USB full speed gaming keyboard" (type: KEYBOARD, id 8)
[    17.198] (**) Option "xkb_rules" "evdev"
[    17.198] (**) Option "xkb_model" "pc104"
[    17.198] (**) Option "xkb_layout" "dvorak"
[    17.199] (II) config/udev: Adding input device USB full speed gaming keyboard (/dev/input/event3)
[    17.199] (**) USB full speed gaming keyboard: Applying InputClass "evdev keyboard catchall"
[    17.199] (**) USB full speed gaming keyboard: Applying InputClass "system-keyboard"
[    17.199] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 44 paused 0
[    17.199] (II) Using input driver 'evdev' for 'USB full speed gaming keyboard'
[    17.199] (**) USB full speed gaming keyboard: always reports core events
[    17.199] (**) evdev: USB full speed gaming keyboard: Device: "/dev/input/event3"
[    17.199] (--) evdev: USB full speed gaming keyboard: Vendor 0x60b Product 0x6251
[    17.199] (--) evdev: USB full speed gaming keyboard: Found 1 mouse buttons
[    17.199] (--) evdev: USB full speed gaming keyboard: Found scroll wheel(s)
[    17.199] (--) evdev: USB full speed gaming keyboard: Found relative axes
[    17.199] (II) evdev: USB full speed gaming keyboard: Forcing relative x/y axes to exist.
[    17.199] (--) evdev: USB full speed gaming keyboard: Found absolute axes
[    17.199] (II) evdev: USB full speed gaming keyboard: Forcing absolute x/y axes to exist.
[    17.199] (--) evdev: USB full speed gaming keyboard: Found keys
[    17.199] (II) evdev: USB full speed gaming keyboard: Configuring as mouse
[    17.199] (II) evdev: USB full speed gaming keyboard: Configuring as keyboard
[    17.199] (II) evdev: USB full speed gaming keyboard: Adding scrollwheel support
[    17.199] (**) evdev: USB full speed gaming keyboard: YAxisMapping: buttons 4 and 5
[    17.199] (**) evdev: USB full speed gaming keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    17.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7.4/4-1.7.4:1.1/0003:060B:6251.0004/input/input5/event3"
[    17.199] (II) XINPUT: Adding extended input device "USB full speed gaming keyboard" (type: KEYBOARD, id 9)
[    17.199] (**) Option "xkb_rules" "evdev"
[    17.199] (**) Option "xkb_model" "pc104"
[    17.199] (**) Option "xkb_layout" "dvorak"
[    17.200] (II) evdev: USB full speed gaming keyboard: initialized for relative axes.
[    17.200] (WW) evdev: USB full speed gaming keyboard: ignoring absolute axes.
[    17.200] (**) USB full speed gaming keyboard: (accel) keeping acceleration scheme 1
[    17.200] (**) USB full speed gaming keyboard: (accel) acceleration profile 0
[    17.200] (**) USB full speed gaming keyboard: (accel) acceleration factor: 2.000
[    17.200] (**) USB full speed gaming keyboard: (accel) acceleration threshold: 4
[    17.200] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event0)
[    17.200] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    17.253] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 45 paused 0
[    17.253] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    17.253] (**) Logitech USB Receiver: always reports core events
[    17.253] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event0"
[    17.253] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc531
[    17.253] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[    17.253] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    17.253] (--) evdev: Logitech USB Receiver: Found relative axes
[    17.253] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    17.253] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    17.253] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    17.253] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    17.253] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    17.253] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8:1.0/0003:046D:C531.0001/input/input2/event0"
[    17.253] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[    17.253] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    17.254] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    17.254] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    17.254] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    17.254] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    17.254] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    17.254] (II) No input driver specified, ignoring this device.
[    17.254] (II) This device may have been added with another device file.
[    17.254] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[    17.255] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    17.255] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
[    17.255] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 46 paused 0
[    17.255] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    17.255] (**) Logitech USB Receiver: always reports core events
[    17.255] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[    17.255] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc531
[    17.255] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[    17.255] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    17.255] (--) evdev: Logitech USB Receiver: Found relative axes
[    17.255] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[    17.255] (--) evdev: Logitech USB Receiver: Found absolute axes
[    17.255] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[    17.255] (--) evdev: Logitech USB Receiver: Found keys
[    17.255] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    17.255] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    17.255] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    17.256] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    17.256] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    17.256] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8:1.1/0003:046D:C531.0002/input/input3/event1"
[    17.256] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[    17.256] (**) Option "xkb_rules" "evdev"
[    17.256] (**) Option "xkb_model" "pc104"
[    17.256] (**) Option "xkb_layout" "dvorak"
[    17.256] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    17.256] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    17.256] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    17.256] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    17.256] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    17.256] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    17.256] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[    17.256] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    17.257] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
[    17.257] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 47 paused 0
[    17.257] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[    17.257] (**) Eee PC WMI hotkeys: always reports core events
[    17.257] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event7"
[    17.257] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[    17.257] (--) evdev: Eee PC WMI hotkeys: Found keys
[    17.257] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[    17.257] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input10/event7"
[    17.257] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
[    17.257] (**) Option "xkb_rules" "evdev"
[    17.257] (**) Option "xkb_model" "pc104"
[    17.257] (**) Option "xkb_layout" "dvorak"
[    17.258] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    17.258] (II) No input driver specified, ignoring this device.
[    17.258] (II) This device may have been added with another device file.
[    17.324] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    17.324] (**) NVIDIA(0):     device DELL 2005FPW (DFP-3) (Using EDID frequencies has
[    17.324] (**) NVIDIA(0):     been enabled on all display devices.)
[    17.330] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    17.331] (**) NVIDIA(0):     device Ancor Communications Inc ASUS VH238 (DFP-0) (Using
[    17.331] (**) NVIDIA(0):     EDID frequencies has been enabled on all display
[    17.331] (**) NVIDIA(0):     devices.)
[    17.404] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1920x1080 +0+600 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[    17.416] (II) NVIDIA(0): Setting mode "DVI-I-1: nvidia-auto-select @1920x1080 +0+600 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DVI-D-0: nvidia-auto-select @1050x1680 +1920+0 {ViewPortIn=1050x1680, ViewPortOut=1680x1050+0+0, Rotation=90}"
[    17.570] (II) evdev: Eee PC WMI hotkeys: Close
[    17.570] (II) UnloadModule: "evdev"
[    17.570] (II) systemd-logind: releasing fd for 13:71
[    17.623] (II) evdev: Logitech USB Receiver: Close
[    17.623] (II) UnloadModule: "evdev"
[    17.623] (II) systemd-logind: releasing fd for 13:65
[    17.676] (II) evdev: Logitech USB Receiver: Close
[    17.676] (II) UnloadModule: "evdev"
[    17.676] (II) systemd-logind: releasing fd for 13:64
[    17.730] (II) evdev: USB full speed gaming keyboard: Close
[    17.730] (II) UnloadModule: "evdev"
[    17.730] (II) systemd-logind: releasing fd for 13:67
[    17.783] (II) evdev: USB full speed gaming keyboard: Close
[    17.783] (II) UnloadModule: "evdev"
[    17.783] (II) systemd-logind: releasing fd for 13:66
[    17.836] (II) evdev: Power Button: Close
[    17.836] (II) UnloadModule: "evdev"
[    17.836] (II) systemd-logind: releasing fd for 13:68
[    17.863] (II) evdev: Power Button: Close
[    17.863] (II) UnloadModule: "evdev"
[    17.863] (II) systemd-logind: releasing fd for 13:69
[    18.228] (II) NVIDIA(GPU-1): Deleting GPU-1
[    18.228] (II) NVIDIA(GPU-0): Deleting GPU-0
[    18.231] (II) Server terminated successfully (0). Closing log file.

Offline

#8 2015-03-22 16:13:19

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: [solved] Xorg quits after 'startx' no error message

Try logging the output of i3 https://wiki.archlinux.org/index.php/I3#xinitrc although I'm not sure if it's being started at all.

Offline

#9 2015-03-22 16:24:39

Gusar
Member
Registered: 2009-08-25
Posts: 3,605

Re: [solved] Xorg quits after 'startx' no error message

15goudreau wrote:

saying it was terminated successfully.

That means X works, but has nothing to run and has therefore shut down. Which means that for some reason your .xinitrc isn't being picked up. No clue what that reason might be.

Offline

#10 2015-03-22 16:39:20

ayekat
Member
Registered: 2011-01-17
Posts: 1,425
Website

Re: [solved] Xorg quits after 'startx' no error message

Gusar wrote:

[...] for some reason your .xinitrc isn't being picked up

This might be the case if $XINITRC doesn't match the location of .xinitrc.

Otherwise, I would add something like

touch $HOME/debug_i3_start

at the beginning of .xinitrc, then something like

touch $HOME/debug_i3_pre
i3
echo $? > $HOME/debug_i3_post

at the end, to determine if

  1. your .xinitrc is actually executed,

  2. xinit actually reaches the i3 line, and

  3. i3 doesn't make xinit quit in the middle of its execution

(of course the files debug_i3_* shouldn't exist in your home folder prior to that).

EDIT

The idea is of course to see at what point the said files are not created (and thus xinit doesn't execute that part of .xinitrc)... it's kind of the equivalent of printf debugging.
If you see that it reaches i3 correctly, the problem must either lie with your driver (but I doubt that), or i3 is doing something funky.

Last edited by ayekat (2015-05-06 09:26:16)


{,META,RE}PKGBUILDSpacman-hacks (includes makemetapkg and remakepkg) │ dotfiles

Offline

#11 2015-03-22 17:02:23

15goudreau
Member
Registered: 2014-06-19
Posts: 86

Re: [solved] Xorg quits after 'startx' no error message

so I did what ayekat suggested. Here are the contents of my .xintrc as it stands currently

#!/bin/sh
#
# ~/.xinitrc
#
# Executed by startx (run your window manager from here)

if [ -d /etc/X11/xinit/xinitrc.d ]; then
  for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
  done
  unset f
fi
touch ~/debug_i3_start
setxkbmap dvorak
xrandr --output DVI-D-0 --mode 1680x1050 --pos 1920x0 --rotate left --output HDMI-0 --off --output DVI-I-1 --mode 1920x1080 --pos 0x600 --rotate normal --output DVI-I-0 --off --output DP-1 --off --output DP-0 --off
numlockx &
sh ~/.fehbg &
#compton -b --backend xrender --config /dev/null
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
echo $? > ~/debug_i3_pre
exec i3
echo $? > ~/debug_i3_post

I think that is basically what you were saying to do correct?

So when I then look at the contents of ~/ I see the newly created debug_i3_pre which contains "0" but ~/debug_i3_post isn't created. I tried reinstalling i3 through pacman and it said that it had an upgrade but after that it didn't seem to do anything.

Thoughts? Issue with i3 it would seem? maybe I just need to purge it and reinstall?

Offline

#12 2015-03-22 17:08:48

ayekat
Member
Registered: 2011-01-17
Posts: 1,425
Website

Re: [solved] Xorg quits after 'startx' no error message

15goudreau wrote:

~/debug_i3_post isn't created.

That's not surprising, since everything after the

exec i3

line isn't executed (since the .xinitrc shell execution process is replaced by i3, see also exec (3)).
Anyway, we see that i3 is executed, so I would suggest to log the output of i3 as suggested by karol.


{,META,RE}PKGBUILDSpacman-hacks (includes makemetapkg and remakepkg) │ dotfiles

Offline

#13 2015-03-22 17:27:23

15goudreau
Member
Registered: 2014-06-19
Posts: 86

Re: [solved] Xorg quits after 'startx' no error message

Here is the output from the log file

i3: error while loading shared libraries: libEGL.so.1: cannot open shared object file: No such file or directory

looks like it might have something to do with the nvidia lib 32 package?

Offline

#14 2015-03-22 17:33:49

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: [solved] Xorg quits after 'startx' no error message

Do you have that file?
Yes, you need either mesa or nvidia. What package and what version do you have installed?

Offline

#15 2015-03-22 17:40:12

15goudreau
Member
Registered: 2014-06-19
Posts: 86

Re: [solved] Xorg quits after 'startx' no error message

I have nvidia installed I'll check if the lib 32 package is with it

Offline

#16 2015-03-22 17:50:43

15goudreau
Member
Registered: 2014-06-19
Posts: 86

Re: [solved] Xorg quits after 'startx' no error message

I installed the lib32-nvidia package, however I am still getting the same error in the log file.

Offline

#17 2015-03-22 17:52:10

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 25,090
Website

Re: [solved] Xorg quits after 'startx' no error message

That file is not provided by lib32-nvidia.  Do you have that file on your system?

$ pkgfile libEGL.so.1
extra/mesa
extra/mesa-libgl
extra/nvidia-304xx-libgl
extra/nvidia-340xx-libgl
extra/nvidia-340xx-utils
extra/nvidia-libgl
extra/nvidia-utils
multilib/lib32-mesa
multilib/lib32-mesa-libgl
multilib/lib32-nvidia-304xx-libgl
multilib/lib32-nvidia-340xx-libgl
multilib/lib32-nvidia-340xx-utils
multilib/lib32-nvidia-libgl
multilib/lib32-nvidia-utils

"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#18 2015-03-22 18:18:03

15goudreau
Member
Registered: 2014-06-19
Posts: 86

Re: [solved] Xorg quits after 'startx' no error message

I'm not sure what you mean? If I run the command you did, I get the same output.

Offline

#19 2015-03-22 18:26:24

nullified
Member
From: Massachusetts, USA
Registered: 2013-12-09
Posts: 468

Re: [solved] Xorg quits after 'startx' no error message

You installed lib32-nvidia...it does not include the file that is giving you the trouble. pkgfile is a list of the packages that include that file.


"We may say most aptly, that the Analytical Engine weaves algebraical patterns just as the Jacquard-loom weaves flowers and leaves." - Ada Lovelace

Offline

#20 2015-03-22 18:28:17

Gusar
Member
Registered: 2009-08-25
Posts: 3,605

Re: [solved] Xorg quits after 'startx' no error message

libEGL.so.1 is provided by mesa-libgl or nvidia-libgl. Since you're using the nvidia driver, you should have nvidia-libgl installed. To be exact, the *-libgl packages contain symlinks to the real libraries that are in /usr/lib/mesa and /usr/lib/nvidia

Offline

#21 2015-03-22 18:50:20

15goudreau
Member
Registered: 2014-06-19
Posts: 86

Re: [solved] Xorg quits after 'startx' no error message

Yeah, I do have nvidia-libgl installed, which contains the libEGL.so.1 package. That makes sense. So I guess that still brings me back to why am I getting that error from i3?

Offline

#22 2015-03-22 18:54:21

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: [solved] Xorg quits after 'startx' no error message

Sorry If I caused any confusion by saying you need either mesa or nvidia - I didn't mean 'mesa' and 'nvidia' packages, I meant it as different libgl implementations.
nvidia has different packages depending on which card and what architecture do you use.

Edit: Please post the output of

locate libEGL.so.1

Last edited by karol (2015-03-22 18:56:28)

Offline

#23 2015-03-22 20:00:19

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 25,090
Website

Re: [solved] Xorg quits after 'startx' no error message

The output of the following might also help:

ldd `which i3` | grep EGL

Then confirm that the library is at the sample place as the path after the "=>" in the output of this command.


"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#24 2015-03-22 21:35:06

15goudreau
Member
Registered: 2014-06-19
Posts: 86

Re: [solved] Xorg quits after 'startx' no error message

Locate command yields

Locate: can not stat () '/var/lib/mlocate/mlocate.db' : no such file or directory

Ldd 'which i3' | grep EGL yields

./which i3: no such file or directory

Something seems odd here....

Offline

#25 2015-03-22 21:42:04

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 25,090
Website

Re: [solved] Xorg quits after 'startx' no error message

You used quotes rather than backticks.  Copy and past my code, or use this:

ldd $(which i3)

or just the following if i3 is where it should be:

ldd /usr/bin/i3

"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

Board footer

Powered by FluxBB