You are not logged in.

#1 2015-03-28 01:42:15

rlouhibi
Member
Registered: 2015-03-28
Posts: 7

No sound hp spectre 13 x360 (2015)

As stated in the title I have no sound on my newly bought hp spectre 13 x360

I tried to load the drivers manulally using modprobe:

options snd-hda-intel model=laptop 

And:

options snd-hda-intel model=laptop-hp with no luck.

Here it is the output of alsa-info.sh :

upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.64
!!################################

!!Script ran on: Sat Mar 28 01:30:53 UTC 2015


!!Linux Distribution
!!------------------

Arch Linux \r (\l) NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="https://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"


!!DMI Information
!!---------------

Manufacturer:      Hewlett-Packard
Product Name:      HP Spectre x360 Convertible 13 
Product Version:    
Firmware Version:  F.04


!!Kernel Information
!!------------------

Kernel release:    3.19.2-1-ARCH
Operating System:  GNU/Linux
Architecture:      x86_64
Processor:         unknown
SMP Enabled:       Yes


!!ALSA Version
!!------------

Driver version:     k3.19.2-1-ARCH
Library version:    1.0.29
Utilities version:  1.0.29


!!Loaded ALSA modules
!!-------------------

snd_hda_intel


!!Sound Servers on this system
!!----------------------------

Pulseaudio:
      Installed - Yes (/usr/bin/pulseaudio)
      Running - Yes


!!Soundcards recognised by ALSA
!!-----------------------------

 0 [HDMI           ]: HDA-Intel - HDA Intel HDMI
                      HDA Intel HDMI at 0xb2210000 irq 58


!!PCI Soundcards installed in the system
!!--------------------------------------

00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)


!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!-------------------------------------------------------

00:03.0 0403: 8086:160c (rev 09)
    Subsystem: 103c:802d


!!Loaded sound module options
!!---------------------------

!!Module: snd_hda_intel
    align_buffer_size : -1
    bdl_pos_adj : 32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
    enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
    enable_msi : -1
    id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    power_save : 0
    power_save_controller : Y
    probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    single_cmd : N
    snoop : -1


!!HDA-Intel Codec information
!!---------------------------
--startcollapse--

Codec: Intel Broadwell HDMI
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862808
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D3 CLKSTOP EPSS
  Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
  Converter: stream=1, channel=0
  Digital: Enabled KAE
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x5]: PCM AC3
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
  Converter: stream=0, channel=0
  Digital: Enabled KAE
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x5]: PCM AC3
  Power states:  D0 D3 EPSS
  Power: setting=D3, actual=D3
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
  Converter: stream=0, channel=0
  Digital: Enabled KAE
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x5]: PCM AC3
  Power states:  D0 D3 EPSS
  Power: setting=D3, actual=D3
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
  Control: name="IEC958 Playback Con Mask", index=0, device=0
  Control: name="IEC958 Playback Pro Mask", index=0, device=0
  Control: name="IEC958 Playback Default", index=0, device=0
  Control: name="IEC958 Playback Switch", index=0, device=0
  Control: name="ELD", index=0, device=3
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0b000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=01, enabled=1
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Devices: 0
  Connection: 0
  In-driver Connection: 3
     0x02 0x03 0x04
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0
  Control: name="IEC958 Playback Con Mask", index=1, device=0
  Control: name="IEC958 Playback Pro Mask", index=1, device=0
  Control: name="IEC958 Playback Default", index=1, device=0
  Control: name="IEC958 Playback Switch", index=1, device=0
  Control: name="ELD", index=0, device=7
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0b000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=02, enabled=1
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Devices: 0
  Connection: 0
  In-driver Connection: 3
     0x02 0x03 0x04
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Control: name="HDMI/DP,pcm=8 Jack", index=0, device=0
  Control: name="IEC958 Playback Con Mask", index=2, device=0
  Control: name="IEC958 Playback Pro Mask", index=2, device=0
  Control: name="IEC958 Playback Default", index=2, device=0
  Control: name="IEC958 Playback Switch", index=2, device=0
  Control: name="ELD", index=0, device=8
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0b000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x00:
  Unsolicited: tag=03, enabled=1
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Devices: 0
  Connection: 0
  In-driver Connection: 3
     0x02 0x03 0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono
--endcollapse--


!!ALSA Device nodes
!!-----------------

crw-rw----+ 1 root audio 116,  2 Mar 27 21:30 /dev/snd/controlC0
crw-rw----+ 1 root audio 116,  6 Mar 27 21:30 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116,  3 Mar 27 21:30 /dev/snd/pcmC0D3p
crw-rw----+ 1 root audio 116,  4 Mar 27 21:30 /dev/snd/pcmC0D7p
crw-rw----+ 1 root audio 116,  5 Mar 27 21:30 /dev/snd/pcmC0D8p
crw-rw----+ 1 root audio 116,  1 Mar 27 21:30 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Mar 27 21:30 /dev/snd/timer

/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root  60 Mar 27 21:30 .
drwxr-xr-x 3 root root 200 Mar 27 21:30 ..
lrwxrwxrwx 1 root root  12 Mar 27 21:30 pci-0000:00:03.0 -> ../controlC0


!!ALSA configuration files
!!------------------------

!!System wide config file (/etc/asound.conf)

# Use PulseAudio by default
pcm.!default {
  type pulse
  fallback "sysdefault"
  hint {
    show on
    description "Default ALSA Output (currently PulseAudio Sound Server)"
  }
}

ctl.!default {
  type pulse
  fallback "sysdefault"
}

# vim:set ft=alsaconf:


!!Aplay/Arecord output
!!--------------------

APLAY

**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

ARECORD

**** List of CAPTURE Hardware Devices ****

!!Amixer output
!!-------------

!!-------Mixer controls for card 0 [HDMI]

Card hw:0 'HDMI'/'HDA Intel HDMI at 0xb2210000 irq 58'
  Mixer name    : 'Intel Broadwell HDMI'
  Components    : 'HDA:80862808,80860101,00100000'
  Controls      : 21
  Simple ctrls  : 3
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958',1
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958',2
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]


!!Alsactl output
!!--------------

--startcollapse--
state.HDMI {
    control.1 {
        iface CARD
        name 'HDMI/DP,pcm=3 Jack'
        value false
        comment {
            access read
            type BOOLEAN
            count 1
        }
    }
    control.2 {
        iface MIXER
        name 'IEC958 Playback Con Mask'
        value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
        comment {
            access read
            type IEC958
            count 1
        }
    }
    control.3 {
        iface MIXER
        name 'IEC958 Playback Pro Mask'
        value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
        comment {
            access read
            type IEC958
            count 1
        }
    }
    control.4 {
        iface MIXER
        name 'IEC958 Playback Default'
        value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
        comment {
            access 'read write'
            type IEC958
            count 1
        }
    }
    control.5 {
        iface MIXER
        name 'IEC958 Playback Switch'
        value true
        comment {
            access 'read write'
            type BOOLEAN
            count 1
        }
    }
    control.6 {
        iface PCM
        device 3
        name ELD
        value ''
        comment {
            access 'read volatile'
            type BYTES
            count 0
        }
    }
    control.7 {
        iface CARD
        name 'HDMI/DP,pcm=7 Jack'
        value false
        comment {
            access read
            type BOOLEAN
            count 1
        }
    }
    control.8 {
        iface MIXER
        name 'IEC958 Playback Con Mask'
        index 1
        value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
        comment {
            access read
            type IEC958
            count 1
        }
    }
    control.9 {
        iface MIXER
        name 'IEC958 Playback Pro Mask'
        index 1
        value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
        comment {
            access read
            type IEC958
            count 1
        }
    }
    control.10 {
        iface MIXER
        name 'IEC958 Playback Default'
        index 1
        value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
        comment {
            access 'read write'
            type IEC958
            count 1
        }
    }
    control.11 {
        iface MIXER
        name 'IEC958 Playback Switch'
        index 1
        value true
        comment {
            access 'read write'
            type BOOLEAN
            count 1
        }
    }
    control.12 {
        iface PCM
        device 7
        name ELD
        value ''
        comment {
            access 'read volatile'
            type BYTES
            count 0
        }
    }
    control.13 {
        iface CARD
        name 'HDMI/DP,pcm=8 Jack'
        value false
        comment {
            access read
            type BOOLEAN
            count 1
        }
    }
    control.14 {
        iface MIXER
        name 'IEC958 Playback Con Mask'
        index 2
        value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
        comment {
            access read
            type IEC958
            count 1
        }
    }
    control.15 {
        iface MIXER
        name 'IEC958 Playback Pro Mask'
        index 2
        value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
        comment {
            access read
            type IEC958
            count 1
        }
    }
    control.16 {
        iface MIXER
        name 'IEC958 Playback Default'
        index 2
        value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
        comment {
            access 'read write'
            type IEC958
            count 1
        }
    }
    control.17 {
        iface MIXER
        name 'IEC958 Playback Switch'
        index 2
        value true
        comment {
            access 'read write'
            type BOOLEAN
            count 1
        }
    }
    control.18 {
        iface PCM
        device 8
        name ELD
        value ''
        comment {
            access 'read volatile'
            type BYTES
            count 0
        }
    }
    control.19 {
        iface PCM
        device 3
        name 'Playback Channel Map'
        value.0 0
        value.1 0
        value.2 0
        value.3 0
        value.4 0
        value.5 0
        value.6 0
        value.7 0
        comment {
            access 'read write'
            type INTEGER
            count 8
            range '0 - 36'
        }
    }
    control.20 {
        iface PCM
        device 7
        name 'Playback Channel Map'
        value.0 0
        value.1 0
        value.2 0
        value.3 0
        value.4 0
        value.5 0
        value.6 0
        value.7 0
        comment {
            access 'read write'
            type INTEGER
            count 8
            range '0 - 36'
        }
    }
    control.21 {
        iface PCM
        device 8
        name 'Playback Channel Map'
        value.0 0
        value.1 0
        value.2 0
        value.3 0
        value.4 0
        value.5 0
        value.6 0
        value.7 0
        comment {
            access 'read write'
            type INTEGER
            count 8
            range '0 - 36'
        }
    }
}
--endcollapse--


!!All Loaded Modules
!!------------------

Module
fuse
ctr
ccm
snd_hda_codec_hdmi
ecb
hid_sensor_incl_3d
hid_sensor_magn_3d
hid_sensor_rotation
hid_sensor_gyro_3d
hid_sensor_accel_3d
hid_sensor_trigger
hid_sensor_iio_common
industrialio_triggered_buffer
kfifo_buf
industrialio
joydev
mousedev
hid_sensor_hub
hid_multitouch
uvcvideo
videobuf2_vmalloc
btusb
videobuf2_memops
videobuf2_core
v4l2_common
bluetooth
videodev
usbhid
media
arc4
iwlmvm
coretemp
mac80211
nls_iso8859_1
iTCO_wdt
hwmon
nls_cp437
iTCO_vendor_support
hp_wmi
sparse_keymap
intel_rapl
vfat
fat
iosf_mbi
x86_pkg_temp_thermal
intel_powerclamp
iwlwifi
kvm
crct10dif_pclmul
cfg80211
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
i915
aesni_intel
evdev
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
mac_hid
psmouse
rtsx_pci_ms
pcspkr
serio_raw
memstick
rfkill
snd_hda_intel
tpm_tis
tpm
shpchp
i2c_i801
lpc_ich
wmi
snd_hda_controller
drm_kms_helper
hp_accel
i2c_hid
snd_hda_codec
lis3lv02d
drm
mei_me
snd_hwdep
hid
snd_pcm
video
dw_dmac
snd_timer
dw_dmac_core
gpio_lynxpoint
8250_dw
input_polldev
mei
intel_gtt
snd
i2c_designware_platform
i2c_algo_bit
i2c_designware_core
hp_wireless
spi_pxa2xx_platform
i2c_core
soundcore
battery
acpi_pad
button
ac
thermal
processor
sch_fq_codel
ext4
crc16
mbcache
jbd2
sd_mod
rtsx_pci_sdmmc
atkbd
libps2
ahci
libahci
libata
scsi_mod
rtsx_pci
xhci_pci
xhci_hcd
usbcore
usb_common
i8042
serio
sdhci_acpi
sdhci
led_class
mmc_core


!!Sysfs Files
!!-----------

/sys/class/sound/hwC0D0/init_pin_configs:
0x05 0x18560010
0x06 0x18560010
0x07 0x18560010

/sys/class/sound/hwC0D0/driver_pin_configs:

/sys/class/sound/hwC0D0/user_pin_configs:

/sys/class/sound/hwC0D0/init_verbs:

/sys/class/sound/hwC0D0/hints:


!!ALSA/HDA dmesg
!!--------------

[    1.248463] tpm_tis 00:07: 1.2 TPM (device-id 0x1A, rev-id 16)
[    1.249184] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[    1.258304] input: PC Speaker as /devices/platform/pcspkr/input/input6
--
[    2.424522] i915 0000:00:02.0: registered panic notifier
[    2.453152] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    2.454208] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[    2.454257] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[    2.637718] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled

Last edited by rlouhibi (2015-03-28 02:07:19)

Offline

#2 2015-03-28 01:58:30

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: No sound hp spectre 13 x360 (2015)

Jesus wept: use code tags when you paste to the boards https://wiki.archlinux.org/index.php/Fo … s_and_code



Moving to NC...


Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#3 2015-03-28 02:09:00

rlouhibi
Member
Registered: 2015-03-28
Posts: 7

Re: No sound hp spectre 13 x360 (2015)

@jasonwryan I sincerely think it's a hardware/kernel question.

Offline

#4 2015-03-28 03:19:57

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: No sound hp spectre 13 x360 (2015)

Sure you do, but you haven't done anything to convince anyone else here of that...

Have you worked through the troubleshooting section of the ALSA page?


Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#5 2015-03-28 03:29:18

rlouhibi
Member
Registered: 2015-03-28
Posts: 7

Re: No sound hp spectre 13 x360 (2015)

jasonwryan wrote:

Sure you do, but you haven't done anything to convince anyone else here of that...

Have you worked through the troubleshooting section of the ALSA page?

Yes I did.

And as I said I tried loading the the drivers manually using diffrent models (laptop, laptop-hp, ...) in the the modprobe conf.

And as you can see in the output of alsa-info.sh  there is no valid sound card:

!!Soundcards recognised by ALSA
!!-----------------------------

 0 [HDMI           ]: HDA-Intel - HDA Intel HDMI
                      HDA Intel HDMI at 0xb2210000 irq 58

Offline

#6 2015-03-28 03:35:48

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: No sound hp spectre 13 x360 (2015)

What does lspci say about your card?


Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#7 2015-03-28 03:38:19

rlouhibi
Member
Registered: 2015-03-28
Posts: 7

Re: No sound hp spectre 13 x360 (2015)

jasonwryan wrote:

What does lspci say about your card?

lspci | grep Audio

00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)

Offline

#8 2015-03-28 03:40:10

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: No sound hp spectre 13 x360 (2015)


Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#9 2015-03-28 03:42:17

rlouhibi
Member
Registered: 2015-03-28
Posts: 7

Re: No sound hp spectre 13 x360 (2015)

jasonwryan wrote:

thx seems like they having the same problem as me, diffrent laptop model.

Offline

#10 2015-03-28 03:43:29

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: No sound hp spectre 13 x360 (2015)

First thing I would do is upgrade to 3.19.3...


Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#11 2015-03-28 03:52:14

rlouhibi
Member
Registered: 2015-03-28
Posts: 7

Re: No sound hp spectre 13 x360 (2015)

jasonwryan wrote:

First thing I would do is upgrade to 3.19.3...

ok I'll do that. and I will even try to compile the latest kernel, and update the thread.

Offline

#12 2015-03-28 11:07:16

tulcod
Member
Registered: 2011-05-25
Posts: 9

Re: No sound hp spectre 13 x360 (2015)

OP is not the only person with this problem. I would indeed recommend upgrading the kernel to see what happens. I am in fact quite interested in the result as well. Slightly offtopic, does the webcam work?

If a kernel upgrade doesn't work, you'll probably have to contact the alsa guys and file a bug report somewhere (but probably someone's already working on it - Broadwell very recent hardware and this system looks fairly stardard).

Edit: ah yes, there is already a kernel bugreport

Last edited by tulcod (2015-03-28 11:18:29)

Offline

#13 2015-03-28 16:29:57

rlouhibi
Member
Registered: 2015-03-28
Posts: 7

Re: No sound hp spectre 13 x360 (2015)

tulcod wrote:

OP is not the only person with this problem. I would indeed recommend upgrading the kernel to see what happens. I am in fact quite interested in the result as well. Slightly offtopic, does the webcam work?

If a kernel upgrade doesn't work, you'll probably have to contact the alsa guys and file a bug report somewhere (but probably someone's already working on it - Broadwell very recent hardware and this system looks fairly stardard).

Edit: ah yes, there is already a kernel bugreport

Yep, the webcam works just fine.

Offline

#14 2015-03-29 09:50:38

evgenymarkov
Member
Registered: 2015-03-29
Posts: 1

Re: No sound hp spectre 13 x360 (2015)

Hello! Can you tell me about the work of any Linux on your HP Spectre? I really want fully linux compatible laptop.
What works? What doesn't works? Microphones, suspend/resume, hibernate, Touchpad(and gestures), Touchscreen(multitouch), Fn-keys, HDMI sound?
Latest kernel has helped you?
Notebook have single-channel memory or dual? How long does it work?

Last edited by evgenymarkov (2015-03-29 10:04:32)

Offline

#15 2015-03-29 16:09:06

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: No sound hp spectre 13 x360 (2015)

evgenymarkov: please don't try and hijack this thread https://wiki.archlinux.org/index.php/Fo … _hijacking


Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#16 2015-04-27 23:02:53

djthread
Member
Registered: 2010-02-14
Posts: 23

Re: No sound hp spectre 13 x360 (2015)

Any recent thoughts on this issue? I rather like my new Spectre x360, but I'm only a couple days away from my 30-day return window now, and I don't think this laptop is going to work so well for me without sound..

If I'm really happy with this machine, otherwise, should I hang onto it? ... Is it clearly the case that HP needs to release a bios patch to resolve this issue? Or do we think it's something the community can resolve ?

Last edited by djthread (2015-04-28 01:00:40)

Offline

#17 2015-09-15 15:15:24

bothynus
Member
Registered: 2015-09-15
Posts: 2

Re: No sound hp spectre 13 x360 (2015)

Anything new?

There was a guy on the HP forums that got it to work by adding a parameter for GRUB to pretend something was Windows (I believe). I would just copy/paste it to try it out, but I have systemd-boot, and I can't for the life of me find the right config file.


Link for HP forum post: http://h30434.www3.hp.com/t5/Notebook-P … -p/4980797

For clarification, my issue is exactly as others have described for the HP Spectre x360 and the XPS 13 (because it uses the same sound component). Alsamixer is only able to play audio through HDMI, not through the internal speakers or the audio jack.


The output for lspci is:

00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)

Last edited by bothynus (2015-09-15 15:39:10)

Offline

#18 2015-09-15 18:39:17

ighea
Member
From: Finland
Registered: 2007-10-20
Posts: 118

Re: No sound hp spectre 13 x360 (2015)

Yeah,

the internal speakers are finally available after appending the following in to kernel command line:
acpi_backlight=vendor acpi_osi='!Windows 2013' acpi_osi='!Windows 2012'

For me using gummiboot to boot my Spectre on UEFI mode it took to add the line in to end of the options line in /boot/EFI/loader/entries/arch.conf .

Took a bit fiddling to set speakers as default audio output after unmuting them and setting volume levels, but now it works fine.

Thanks, bothynus.

I actually tried that before, but thought that having the acpi_osi twice on the line was a mistake and dropped the 2012 parameter off which didn't lead into working speaker outputs so those both acpi_osi entries are there for a reason.

Last edited by ighea (2015-09-15 18:39:43)


(╯°□°)╯~ ┻━┻

Offline

#19 2015-09-15 19:46:07

bothynus
Member
Registered: 2015-09-15
Posts: 2

Re: No sound hp spectre 13 x360 (2015)

Thanks, I found my config file. It was /boot/loader/entries/arch.conf. I swear I had checked every directory in the /boot partition, but I guess I missed that one.

I am appending that now, and I will be rebooting to test...

It worked. I had to put the line of code you mentioned after "options" and before the "root=" section. I don't know why that mattered, but I tried two cold reboots trying it with the line of code at the bottom of the file, and then I tried two cold reboots with it before the "root=", and it was only after the 4th reboot total that it worked. The only reason I knew to do this was because I went back to the link I mentioned earlier, and that was how his full line of code was structured.

Last edited by bothynus (2015-09-15 20:03:08)

Offline

Board footer

Powered by FluxBB