You are not logged in.

Pages: 1

#1 2015-04-20 10:11:20

hoerbert
Member
Registered: 2013-04-03
Posts: 87

[Solved] KDE plasma won't start; X issue?

Hi everyone,

since today plasma on my notebook won't start anymore. sddm starts ok, I can enter my login credentials but then the splashscreen of plasma gets stuck about half way.

If I try to use startkde manually, I only get this message:

$DISPLAY is not set or cannot connect to the X server.

$DISPLAY really is not set, so this might be the Problem.

Xorg.0.log looks like follows:

[   247.545] 
X.Org X Server 1.17.1
Release Date: 2015-02-10
[   247.545] X Protocol Version 11, Revision 0
[   247.545] Build Operating System: Linux 3.19.2-1-ARCH x86_64 
[   247.545] Current Operating System: Linux Arch 3.19.3-3-ARCH #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015 x86_64
[   247.545] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=75188b35-aa3e-420c-8647-5a4135cbe0ec rw acpi_backlight=vendor quiet
[   247.545] Build Date: 14 April 2015  10:34:18AM
[   247.545]  
[   247.545] Current version of pixman: 0.32.6
[   247.545] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   247.545] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   247.545] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 20 10:58:33 2015
[   247.546] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   247.546] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   247.546] (==) No Layout section.  Using the first Screen section.
[   247.546] (==) No screen section available. Using defaults.
[   247.546] (**) |-->Screen "Default Screen Section" (0)
[   247.546] (**) |   |-->Monitor "<default monitor>"
[   247.546] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   247.546] (==) Automatically adding devices
[   247.546] (==) Automatically enabling devices
[   247.546] (==) Automatically adding GPU devices
[   247.546] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[   247.546] 	Entry deleted from font path.
[   247.546] 	(Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[   247.546] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   247.546] 	Entry deleted from font path.
[   247.546] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   247.546] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   247.546] 	Entry deleted from font path.
[   247.546] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   247.546] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[   247.546] (==) ModulePath set to "/usr/lib/xorg/modules"
[   247.546] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   247.546] (II) Loader magic: 0x815d80
[   247.546] (II) Module ABI versions:
[   247.546] 	X.Org ANSI C Emulation: 0.4
[   247.546] 	X.Org Video Driver: 19.0
[   247.546] 	X.Org XInput driver : 21.0
[   247.546] 	X.Org Server Extension : 9.0
[   247.548] (EE) systemd-logind: failed to get session: PID 1378 does not belong to any known session
[   247.548] (II) xfree86: Adding drm device (/dev/dri/card0)
[   247.550] (--) PCI:*(0:0:2:0) 8086:0166:1028:056d rev 9, Mem @ 0xc2000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64
[   247.550] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   247.550] (II) LoadModule: "glx"
[   247.550] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   247.552] (II) Module glx: vendor="X.Org Foundation"
[   247.552] 	compiled for 1.17.1, module version = 1.0.0
[   247.552] 	ABI class: X.Org Server Extension, version 9.0
[   247.552] (==) AIGLX enabled
[   247.552] (==) Matched intel as autoconfigured driver 0
[   247.552] (==) Matched intel as autoconfigured driver 1
[   247.552] (==) Matched modesetting as autoconfigured driver 2
[   247.552] (==) Matched fbdev as autoconfigured driver 3
[   247.552] (==) Matched vesa as autoconfigured driver 4
[   247.552] (==) Assigned the driver to the xf86ConfigLayout
[   247.552] (II) LoadModule: "intel"
[   247.552] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   247.552] (II) Module intel: vendor="X.Org Foundation"
[   247.552] 	compiled for 1.17.1, module version = 2.99.917
[   247.552] 	Module class: X.Org Video Driver
[   247.552] 	ABI class: X.Org Video Driver, version 19.0
[   247.552] (II) LoadModule: "modesetting"
[   247.552] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   247.552] (II) Module modesetting: vendor="X.Org Foundation"
[   247.552] 	compiled for 1.17.1, module version = 1.17.1
[   247.552] 	Module class: X.Org Video Driver
[   247.552] 	ABI class: X.Org Video Driver, version 19.0
[   247.552] (II) LoadModule: "fbdev"
[   247.553] (WW) Warning, couldn't open module fbdev
[   247.553] (II) UnloadModule: "fbdev"
[   247.553] (II) Unloading fbdev
[   247.553] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   247.553] (II) LoadModule: "vesa"
[   247.553] (WW) Warning, couldn't open module vesa
[   247.553] (II) UnloadModule: "vesa"
[   247.553] (II) Unloading vesa
[   247.553] (EE) Failed to load module "vesa" (module does not exist, 0)
[   247.553] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[   247.553] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[   247.553] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[   247.553] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[   247.553] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   247.553] (++) using VT number 1

[   247.553] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20141121
[   247.554] (WW) Falling back to old probe method for modesetting
[   247.554] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[   247.554] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[   247.554] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   247.554] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   247.554] (==) intel(0): RGB weight 888
[   247.554] (==) intel(0): Default visual is TrueColor
[   247.554] (II) intel(0): Output LVDS1 has no monitor section
[   247.555] (--) intel(0): Found backlight control interface dell_backlight (type 'platform') for output LVDS1
[   247.555] (II) intel(0): Enabled output LVDS1
[   247.555] (II) intel(0): Output VGA1 has no monitor section
[   247.555] (II) intel(0): Enabled output VGA1
[   247.555] (II) intel(0): Output HDMI1 has no monitor section
[   247.555] (II) intel(0): Enabled output HDMI1
[   247.555] (II) intel(0): Output DP1 has no monitor section
[   247.555] (II) intel(0): Enabled output DP1
[   247.555] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[   247.555] (II) intel(0): Output VIRTUAL1 has no monitor section
[   247.555] (II) intel(0): Enabled output VIRTUAL1
[   247.555] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[   247.555] (==) intel(0): TearFree disabled
[   247.555] (==) intel(0): DPI set to (96, 96)
[   247.555] (II) Loading sub module "dri2"
[   247.555] (II) LoadModule: "dri2"
[   247.555] (II) Module "dri2" already built-in
[   247.555] (II) Loading sub module "present"
[   247.555] (II) LoadModule: "present"
[   247.555] (II) Module "present" already built-in
[   247.555] (II) UnloadModule: "modesetting"
[   247.555] (II) Unloading modesetting
[   247.555] (==) Depth 24 pixmap format is 32 bpp
[   247.555] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[   247.555] (==) intel(0): Backing store enabled
[   247.555] (==) intel(0): Silken mouse enabled
[   247.555] (II) intel(0): HW Cursor enabled
[   247.555] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   247.556] (==) intel(0): DPMS enabled
[   247.556] (==) intel(0): display hotplug detection enabled
[   247.556] (II) intel(0): [DRI2] Setup complete
[   247.556] (II) intel(0): [DRI2]   DRI driver: i965
[   247.556] (II) intel(0): [DRI2]   VDPAU driver: i965
[   247.556] (II) intel(0): direct rendering: DRI2 enabled
[   247.556] (II) intel(0): hardware support for Present enabled
[   247.556] (--) RandR disabled
[   247.594] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   247.594] (II) AIGLX: enabled GLX_ARB_create_context
[   247.594] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   247.594] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   247.594] (II) AIGLX: enabled GLX_INTEL_swap_event
[   247.594] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   247.594] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[   247.595] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[   247.595] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   247.595] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[   247.595] (II) AIGLX: Loaded and initialized i965
[   247.595] (II) GLX: Initialized DRI2 GL provider for screen 0
[   247.597] (II) intel(0): switch to mode 1366x768@60.1 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[   247.606] (II) intel(0): Setting screen physical size to 361 x 203
[   247.638] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[   247.638] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   247.638] (**) Power Button: Applying InputClass "Keyboard Defaults"
[   247.638] (II) LoadModule: "evdev"
[   247.639] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   247.639] (II) Module evdev: vendor="X.Org Foundation"
[   247.639] 	compiled for 1.17.1, module version = 2.9.2
[   247.639] 	Module class: X.Org XInput Driver
[   247.639] 	ABI class: X.Org XInput driver, version 21.0
[   247.639] (II) Using input driver 'evdev' for 'Power Button'
[   247.639] (**) Power Button: always reports core events
[   247.639] (**) evdev: Power Button: Device: "/dev/input/event4"
[   247.639] (--) evdev: Power Button: Vendor 0 Product 0x1
[   247.639] (--) evdev: Power Button: Found keys
[   247.639] (II) evdev: Power Button: Configuring as keyboard
[   247.639] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event4"
[   247.639] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   247.639] (**) Option "xkb_rules" "evdev"
[   247.639] (**) Option "xkb_model" "pc104"
[   247.639] (**) Option "xkb_layout" "de"
[   247.639] (**) Option "xkb_variant" "nodeadkeys"
[   247.668] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[   247.668] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   247.668] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[   247.668] (II) Using input driver 'evdev' for 'Video Bus'
[   247.668] (**) Video Bus: always reports core events
[   247.668] (**) evdev: Video Bus: Device: "/dev/input/event11"
[   247.668] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   247.668] (--) evdev: Video Bus: Found keys
[   247.668] (II) evdev: Video Bus: Configuring as keyboard
[   247.668] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13/event11"
[   247.668] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   247.668] (**) Option "xkb_rules" "evdev"
[   247.668] (**) Option "xkb_model" "pc104"
[   247.668] (**) Option "xkb_layout" "de"
[   247.668] (**) Option "xkb_variant" "nodeadkeys"
[   247.668] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   247.668] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   247.668] (**) Power Button: Applying InputClass "Keyboard Defaults"
[   247.668] (II) Using input driver 'evdev' for 'Power Button'
[   247.668] (**) Power Button: always reports core events
[   247.668] (**) evdev: Power Button: Device: "/dev/input/event2"
[   247.668] (--) evdev: Power Button: Vendor 0 Product 0x1
[   247.668] (--) evdev: Power Button: Found keys
[   247.668] (II) evdev: Power Button: Configuring as keyboard
[   247.668] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input4/event2"
[   247.668] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   247.668] (**) Option "xkb_rules" "evdev"
[   247.668] (**) Option "xkb_model" "pc104"
[   247.668] (**) Option "xkb_layout" "de"
[   247.668] (**) Option "xkb_variant" "nodeadkeys"
[   247.669] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[   247.669] (II) No input driver specified, ignoring this device.
[   247.669] (II) This device may have been added with another device file.
[   247.669] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[   247.669] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[   247.669] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[   247.669] (**) Logitech USB Optical Mouse: always reports core events
[   247.669] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
[   247.720] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc018
[   247.720] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[   247.720] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[   247.720] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[   247.720] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[   247.720] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[   247.720] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[   247.720] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[   247.720] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   247.720] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C018.0001/input/input3/event1"
[   247.720] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
[   247.720] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[   247.720] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[   247.720] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[   247.720] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[   247.720] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[   247.720] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[   247.720] (II) No input driver specified, ignoring this device.
[   247.720] (II) This device may have been added with another device file.
[   247.721] (II) config/udev: Adding input device Laptop_Integrated_Webcam_E4HD (/dev/input/event13)
[   247.721] (**) Laptop_Integrated_Webcam_E4HD: Applying InputClass "evdev keyboard catchall"
[   247.721] (**) Laptop_Integrated_Webcam_E4HD: Applying InputClass "Keyboard Defaults"
[   247.721] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_E4HD'
[   247.721] (**) Laptop_Integrated_Webcam_E4HD: always reports core events
[   247.721] (**) evdev: Laptop_Integrated_Webcam_E4HD: Device: "/dev/input/event13"
[   247.721] (--) evdev: Laptop_Integrated_Webcam_E4HD: Vendor 0xc45 Product 0x643f
[   247.721] (--) evdev: Laptop_Integrated_Webcam_E4HD: Found keys
[   247.721] (II) evdev: Laptop_Integrated_Webcam_E4HD: Configuring as keyboard
[   247.721] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input15/event13"
[   247.721] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_E4HD" (type: KEYBOARD, id 10)
[   247.721] (**) Option "xkb_rules" "evdev"
[   247.721] (**) Option "xkb_model" "pc104"
[   247.721] (**) Option "xkb_layout" "de"
[   247.721] (**) Option "xkb_variant" "nodeadkeys"
[   247.722] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[   247.722] (II) No input driver specified, ignoring this device.
[   247.722] (II) This device may have been added with another device file.
[   247.722] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[   247.722] (II) No input driver specified, ignoring this device.
[   247.722] (II) This device may have been added with another device file.
[   247.722] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[   247.722] (II) No input driver specified, ignoring this device.
[   247.722] (II) This device may have been added with another device file.
[   247.722] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[   247.722] (II) No input driver specified, ignoring this device.
[   247.722] (II) This device may have been added with another device file.
[   247.723] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   247.723] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   247.723] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[   247.723] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   247.723] (**) AT Translated Set 2 keyboard: always reports core events
[   247.723] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   247.723] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   247.723] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   247.723] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   247.723] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   247.723] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[   247.723] (**) Option "xkb_rules" "evdev"
[   247.723] (**) Option "xkb_model" "pc104"
[   247.723] (**) Option "xkb_layout" "de"
[   247.723] (**) Option "xkb_variant" "nodeadkeys"
[   247.723] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event6)
[   247.723] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[   247.723] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[   247.723] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[   247.723] (II) LoadModule: "synaptics"
[   247.724] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   247.724] (II) Module synaptics: vendor="X.Org Foundation"
[   247.724] 	compiled for 1.17.1, module version = 1.8.2
[   247.724] 	Module class: X.Org XInput Driver
[   247.724] 	ABI class: X.Org XInput driver, version 21.0
[   247.724] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[   247.724] (**) ETPS/2 Elantech Touchpad: always reports core events
[   247.724] (**) Option "Device" "/dev/input/event6"
[   247.823] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2940 (res 0)
[   247.823] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1400 (res 0)
[   247.823] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[   247.823] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[   247.823] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[   247.823] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[   247.823] (**) Option "TapButton1" "1"
[   247.823] (**) Option "TapButton2" "2"
[   247.823] (**) Option "TapButton3" "3"
[   247.823] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[   247.823] (**) ETPS/2 Elantech Touchpad: always reports core events
[   247.876] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event6"
[   247.876] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[   247.876] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[   247.877] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[   247.877] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.061
[   247.877] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[   247.877] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[   247.877] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[   247.877] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[   247.877] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[   247.878] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[   247.878] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[   247.878] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[   247.878] (II) No input driver specified, ignoring this device.
[   247.878] (II) This device may have been added with another device file.
[   247.879] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event12)
[   247.879] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[   247.879] (**) Dell WMI hotkeys: Applying InputClass "Keyboard Defaults"
[   247.879] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[   247.879] (**) Dell WMI hotkeys: always reports core events
[   247.879] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event12"
[   247.879] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[   247.879] (--) evdev: Dell WMI hotkeys: Found keys
[   247.879] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[   247.879] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event12"
[   247.879] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 13)
[   247.879] (**) Option "xkb_rules" "evdev"
[   247.879] (**) Option "xkb_model" "pc104"
[   247.879] (**) Option "xkb_layout" "de"
[   247.879] (**) Option "xkb_variant" "nodeadkeys"
[   247.917] (II) intel(0): EDID vendor "AUO", prod id 8684
[   247.917] (II) intel(0): Printing DDC gathered Modelines:
[   247.917] (II) intel(0): Modeline "1366x768"x0.0   76.50  1366 1382 1398 1580  768 771 785 806 +hsync -vsync (48.4 kHz eP)
[   247.917] (II) intel(0): Modeline "1366x768"x0.0   76.50  1366 1382 1398 1902  768 771 785 1004 +hsync -vsync (40.2 kHz e)
[   300.783] (II) AIGLX: Suspending AIGLX clients for VT switch
[  1839.837] (II) AIGLX: Resuming AIGLX clients after VT switch
[  1839.837] (II) intel(0): switch to mode 1366x768@60.1 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[  1839.897] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[  1871.130] (II) AIGLX: Suspending AIGLX clients for VT switch
[  2128.827] (II) AIGLX: Resuming AIGLX clients after VT switch
[  2128.827] (II) intel(0): switch to mode 1366x768@60.1 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[  2128.883] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[  2129.876] (II) AIGLX: Suspending AIGLX clients for VT switch
[  2238.561] (II) AIGLX: Resuming AIGLX clients after VT switch
[  2238.561] (II) intel(0): switch to mode 1366x768@60.1 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[  2238.623] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[  2239.983] (II) AIGLX: Suspending AIGLX clients for VT switch
[  2863.437] (II) AIGLX: Resuming AIGLX clients after VT switch
[  2863.437] (II) intel(0): switch to mode 1366x768@60.1 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[  2863.503] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[  2864.611] (II) AIGLX: Suspending AIGLX clients for VT switch

Interesting line could be 

[   247.548] (EE) systemd-logind: failed to get session: PID 1378 does not belong to any known session

Since I'm a beginner in debugging startup-problems I could need a little guidance.

I'm using an integrated intel-gpu with the standard driver. I'm going to post the specific information soon (I'm writing this post from a windows installation).

If I should provide any other information, the please tell me what you need.

Thanks in advance,

Torben

Last edited by hoerbert (2015-04-20 13:51:26)

Offline

#2 2015-04-20 10:47:54

hoerbert
Member
Registered: 2013-04-03
Posts: 87

Re: [Solved] KDE plasma won't start; X issue?

As promised: My graphics info:

00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
	Subsystem: Dell Device [1028:056d]
	Flags: bus master, fast devsel, latency 0, IRQ 28
	Memory at c2000000 (64-bit, non-prefetchable) [size=4M]
	Memory at b0000000 (64-bit, prefetchable) [size=256M]
	I/O ports at 4000 [size=64]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

Offline

#3 2015-04-20 12:32:15

Basic-Master
Member
Registered: 2007-10-30
Posts: 21

Re: [Solved] KDE plasma won't start; X issue?

Same problem here sad After I login via SDDM, Plasma's splashscreen gets stuck somewhere between 60-90%. I was able to move the cursor and terminate X via CTRL+ALT+BKSP, so I don't think this is an X issue. As an alternative approach I already tried to run Plasma/KDE using startx and startkde using this .xinitrc:

#!/bin/sh
#
# ~/.xinitrc
#
# Executed by startx (run your window manager from here)

if [ -d /etc/X11/xinit/xinitrc.d ]; then
  for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
  done
  unset f
fi

exec startkde

So when running startx from a VT, X comes up, I see the splashscreen for few seconds and then the screen turns black - nothing else happens. So I terminated that session again using CTRL+ALT+BKSP and checked the logs, but I couldn't see anything useful in there except for:

Could not start ksmserver / ksmserver crashed

Any ideas what else might help? I also tried to rename ~/.config to ~/.config-old and did the same procedure, but that didn't help either. It really looks like Plasma 5 is currently broken...

Btw, something similar happened a few times to me in the past, but after I had terminated the X session and tried to log in once more, usually KDE came up after a few seconds and then it worked without problems. Really weird! I also use Intel X drivers (4th gen, Haswell). XFCE4 works well, it hasn't crashed once on my notebook.

Offline

#4 2015-04-20 12:56:43

Xabre
Member
From: Serbia
Registered: 2009-03-19
Posts: 757

Re: [Solved] KDE plasma won't start; X issue?

Have you removed kde related stuff from .cache as well?

Offline

#5 2015-04-20 13:20:35

hoerbert
Member
Registered: 2013-04-03
Posts: 87

Re: [Solved] KDE plasma won't start; X issue?

OK, after "cleaning" the cache and renaming the .config-dir plasma starts again. I can work with that.

Now I have to find out what caused this. I will tell here if I do.

Offline

#6 2015-04-20 13:22:06

Basic-Master
Member
Registered: 2007-10-30
Posts: 21

Re: [Solved] KDE plasma won't start; X issue?

Xabre wrote:

Have you removed kde related stuff from .cache as well?

Yep.

Offline

#7 2015-04-20 13:25:44

arojas
Developer
From: Spain
Registered: 2011-10-09
Posts: 2,313

Re: [Solved] KDE plasma won't start; X issue?

hoerbert wrote:

OK, after "cleaning" the cache and renaming the .config-dir plasma starts again. I can work with that.

Now I have to find out what caused this. I will tell here if I do.

It's some stray .lock file, see https://bbs.archlinux.org/viewtopic.php?id=195729

Offline

#8 2015-04-20 13:51:00

hoerbert
Member
Registered: 2013-04-03
Posts: 87

Re: [Solved] KDE plasma won't start; X issue?

arojas wrote:

Yep, that solved it. Thank you very much.

@Basic-Master: I will mark this as solved. As you seem to have a different problem, it might be better to open a separate thread.

Greetings,

Torben

Offline

Pages: 1

Board footer

Powered by FluxBB