You are not logged in.

#1 2006-03-31 22:43:24

JazzplayerL9
Member
Registered: 2006-03-31
Posts: 108

Alsa ThinkPad 600X problems

Hey all,

I just recently installed Arch...kind of my first real linux experience if you don't count FC5 and ubuntu.  Well...here's the deal.

I have a ThinkPad 600X and installed the Alsa drivers on it to get some sound.  I'm running Enlightenment as a desktop...and it's recognizing the card as a cs46xx sound card.  I went out and downloaded the alsa-driver source and compiled from that with what some other guy said to do.

Now...I don't know how to get it to load the sound modules automatically, but if I open a terminal and put in:

modprobe snd_cs46xx
amixer set Master 75 unmute
amixer set PCM 75 unmute

I can open any program I want and get sound as long as I use that terminal window to open it. 

Anyone have any ideas or come across this before?  I've tried adding the module in the rc.conf and also tried it in the modprobe.conf with no luck.  Really I have no idea what I'm doing and I need some help...I'm running kernel 2.6 and the latest Arch release...ahh...7?

thanks.

Offline

#2 2006-04-01 18:07:49

JazzplayerL9
Member
Registered: 2006-03-31
Posts: 108

Re: Alsa ThinkPad 600X problems

ok probably a good idea to post up my dmesg and see if anyone can figure it out...so:

Linux version 2.6.15-ARCH (root@Wohnung) (gcc version 4.0.3 20060223 (prerelease)) #1 SMP PREEMPT Sat Mar 11 11:41:17 CET 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000013fd0000 (usable)
 BIOS-e820: 0000000013fd0000 - 0000000013fdf000 (ACPI data)
 BIOS-e820: 0000000013fdf000 - 0000000013fe0000 (ACPI NVS)
 BIOS-e820: 0000000013fe0000 - 0000000014000000 (reserved)
 BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
319MB LOWMEM available.
On node 0 totalpages: 81872
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 77776 pages, LIFO batch:15
  HighMem zone: 0 pages, LIFO batch:0
DMI 2.2 present.
ACPI: RSDP (v000 IBM                                   ) @ 0x000fd6e0
ACPI: RSDT (v001 IBM    TP600X   0x00000001  0x00000000) @ 0x13fd0000
ACPI: FADT (v001 IBM    TP600X   0x00000001  0x00000000) @ 0x13fd0100
ACPI: DSDT (v001 IBM    TP600X   0x00000106 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0xef08
Allocating PCI resources starting at 20000000 (gap: 14000000:ebfe0000)
Built 1 zonelists
Kernel command line: root=/dev/hda3 ro acpi=force pci=noacpi dopcmcia
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (012f3000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 498.355 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 316508k/327488k available (2691k kernel code, 10460k reserved, 733k data, 252k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 997.74 BogoMIPS (lpj=1995496)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0a00 (from 0800)
CPU0: Intel Pentium III (Coppermine) stepping 03
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 3009k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=7
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: Power Resource [PSIO] (on)
ACPI: Embedded Controller [EC0] (gpe 9)
ACPI: Power Resource [PFN0] (off)
ACPI: Power Resource [PVID] (on)
ACPI: Power Resource [PRSD] (off)
ACPI: Power Resource [PDCK] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [_SB_.PCI0] bus is 0
PCI quirk: region ef00-ef3f claimed by PIIX4 ACPI
PCI quirk: region efa0-efaf claimed by PIIX4 SMB
PIIX4 devres C PIO at 15e8-15ef
PIIX4 devres I PIO at 002e-002f
Boot video device is 0000:01:00.0
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
pnp: 00:07: ioport range 0x15e0-0x15ef has been reserved
pnp: 00:07: ioport range 0xef00-0xef3f could not be reserved
pnp: 00:07: ioport range 0xefa0-0xefaf has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
PCI: Bridge: 0000:00:01.0
  IO window: d000-dfff
  MEM window: 70000000-dfffffff
  PREFETCH window: e0000000-f7ffffff
PCI: Bus 2, cardbus bridge: 0000:00:02.0
  IO window: 00001000-000010ff
  IO window: 00001400-000014ff
  PREFETCH window: 20000000-21ffffff
  MEM window: 22000000-23ffffff
PCI: Bus 6, cardbus bridge: 0000:00:02.1
  IO window: 00001800-000018ff
  IO window: 00001c00-00001cff
  PREFETCH window: 24000000-25ffffff
  MEM window: 26000000-27ffffff
PCI: Found IRQ 11 for device 0000:00:02.0
PCI: Sharing IRQ 11 with 0000:00:06.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Found IRQ 11 for device 0000:00:02.1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Limiting direct PCI/PCI transfers.
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Fan [FN00] (off)
ACPI: Fan [FN20] (off)
ACPI: Fan [FN60] (off)
ACPI: Fan [FN70] (off)
ACPI: Video Device [VID0] (multi-head: yes  rom: no  post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THM0] (31 C)
ACPI: Thermal Zone [THM2] (24 C)
ACPI: Thermal Zone [THM6] (24 C)
ACPI: Thermal Zone [THM7] (27 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:MOU0] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
pnp: Device 00:02 activated.
00:02: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 196608 bytes)
TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI wakeup devices: 
LID0 SLPB PCI0 UAR1 BAT0 USB0 
ACPI: (supports S0 S1 S3 S4 S5)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
input: AT Translated Set 2 keyboard as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: HITACHI_DK23DA-20, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: CRN-8241B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 39070080 sectors (20003 MB) w/2048KiB Cache, CHS=38760/16/63, UDMA(33)
hda: cache flushes supported
 hda: hda1 hda2 hda3
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
Emulex LightPulse Fibre Channel SCSI driver 8.1.0
Copyright(c) 2004-2005 Emulex.  All rights reserved.
QLogic Fibre Channel HBA Driver
seagate: ST0x/TMC-8xx not detected.
st: Version 20050830, fixed bufsize 32768, s/g segs 256
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card!
3ware 9000 Storage Controller device driver for Linux v2.26.02.004.
sym53c416.c: Version 1.0.0-ac
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.04 
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.001.
imm: Version 2.05 (for Linux 2.4.0)
ipr: IBM Power RAID SCSI Device Driver version: 2.1.0 (October 31, 2005)
Adaptec aacraid driver (1.1-4 Mar 11 2006 11:27:19)
nsp32: loading...
libata version 1.20 loaded.
osst :I: Tape driver with OnStream support version 0.99.3
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
NCR53c406a: no available ports found
megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
megasas: 00.00.02.00-rc4 Fri Sep 16 12:37:08 EDT 2005
megaraid: 2.20.4.6 (Release Date: Mon Mar 07 12:27:22 EST 2005)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Fusion MPT base driver 3.03.04
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT misc device (ioctl) driver 3.03.04
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT SAS Host driver 3.03.04
Fusion MPT SPI Host driver 3.03.04
Fusion MPT FC Host driver 3.03.04
JFS: nTxBlock = 2497, nTxLock = 19978
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
Freeing unused kernel memory: 252k freed
CSLIP: code copyright 1989 Regents of the University of California
PCI: Found IRQ 11 for device 0000:00:02.0
PCI: Sharing IRQ 11 with 0000:00:06.0
PCI: Sharing IRQ 11 with 0000:01:00.0
Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
Yenta: Enabling burst memory read transactions
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
PPP generic driver version 2.4.2
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000010
PCI: Found IRQ 11 for device 0000:00:02.1
Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000006
snd_ac97_codec: Unknown symbol snd_interval_refine
snd_ac97_codec: Unknown symbol snd_pcm_hw_rule_add
snd_cs46xx: Unknown symbol snd_ac97_write_cache
snd_cs46xx: Unknown symbol snd_ac97_resume
snd_cs46xx: Unknown symbol snd_pcm_new
snd_cs46xx: Unknown symbol snd_pcm_lib_preallocate_pages_for_all
snd_cs46xx: Unknown symbol snd_pcm_format_unsigned
snd_cs46xx: Unknown symbol snd_pcm_format_physical_width
snd_cs46xx: Unknown symbol snd_ac97_update_bits
snd_cs46xx: Unknown symbol snd_ac97_mixer
snd_cs46xx: Unknown symbol snd_ac97_bus
snd_cs46xx: Unknown symbol snd_ac97_suspend
snd_cs46xx: Unknown symbol snd_pcm_lib_malloc_pages
snd_cs46xx: Unknown symbol snd_pcm_lib_ioctl
snd_cs46xx: Unknown symbol snd_pcm_lib_free_pages
snd_cs46xx: Unknown symbol snd_pcm_set_ops
snd_cs46xx: Unknown symbol snd_pcm_hw_constraint_list
snd_cs46xx: Unknown symbol snd_pcm_suspend_all
snd_cs46xx: Unknown symbol snd_pcm_format_big_endian
snd_cs46xx: Unknown symbol snd_pcm_lib_preallocate_free_for_all
snd_cs46xx: Unknown symbol snd_pcm_period_elapsed
snd_cs46xx: Unknown symbol snd_ac97_write
snd_cs46xx: Unknown symbol snd_ac97_read
snd_cs46xx: Unknown symbol snd_pcm_format_width
pccard: PCMCIA card inserted into slot 0
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0x40000000
Real Time Clock Driver v1.12
usbcore: registered new driver usbfs
usbcore: registered new driver hub
parport: PnPBIOS parport detected.
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
USB Universal Host Controller Interface driver v2.3
PCI: Found IRQ 11 for device 0000:00:07.2
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x00004000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using uhci_hcd and address 2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
piix4_smbus 0000:00:07.3: IBM Laptop detected; this module may corrupt your serial eeprom! Refusing to load module!
piix4_smbus: probe of 0000:00:07.3 failed with error -1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
snd_pcm_oss: Unknown symbol snd_pcm_lib_read
snd_pcm_oss: Unknown symbol snd_pcm_hw_constraints_init
snd_pcm_oss: Unknown symbol snd_pcm_hw_param_near
snd_pcm_oss: Unknown symbol _snd_pcm_hw_param_setinteger
snd_pcm_oss: Unknown symbol snd_pcm_kernel_ioctl
snd_pcm_oss: Unknown symbol snd_pcm_stop
snd_pcm_oss: Unknown symbol snd_pcm_format_unsigned
snd_pcm_oss: Unknown symbol _snd_pcm_hw_params_any
snd_pcm_oss: Unknown symbol snd_pcm_format_physical_width
snd_pcm_oss: Unknown symbol snd_pcm_hw_param_value_max
snd_pcm_oss: Unknown symbol snd_pcm_hw_param_set
snd_pcm_oss: Unknown symbol snd_pcm_format_silence_64
snd_pcm_oss: Unknown symbol snd_pcm_open_substream
snd_pcm_oss: Unknown symbol snd_pcm_lib_readv
snd_pcm_oss: Unknown symbol _snd_pcm_hw_param_set
snd_pcm_oss: Unknown symbol snd_pcm_kernel_capture_ioctl
snd_pcm_oss: Unknown symbol snd_pcm_lib_writev
snd_pcm_oss: Unknown symbol _snd_pcm_hw_param_min
snd_pcm_oss: Unknown symbol snd_pcm_format_linear
snd_pcm_oss: Unknown symbol snd_pcm_mmap_data
snd_pcm_oss: Unknown symbol snd_pcm_devices
snd_pcm_oss: Unknown symbol snd_pcm_hw_param_value_min
snd_pcm_oss: Unknown symbol snd_pcm_build_linear_format
snd_pcm_oss: Unknown symbol snd_pcm_hw_param_mask
snd_pcm_oss: Unknown symbol snd_pcm_format_signed
snd_pcm_oss: Unknown symbol snd_pcm_hw_constraints_complete
snd_pcm_oss: Unknown symbol snd_pcm_link_rwlock
snd_pcm_oss: Unknown symbol snd_pcm_hw_refine
snd_pcm_oss: Unknown symbol snd_pcm_kernel_playback_ioctl
snd_pcm_oss: Unknown symbol snd_pcm_format_big_endian
snd_pcm_oss: Unknown symbol snd_pcm_notify
snd_pcm_oss: Unknown symbol snd_pcm_release_substream
snd_pcm_oss: Unknown symbol snd_pcm_lib_write
snd_pcm_oss: Unknown symbol snd_pcm_format_set_silence
snd_pcm_oss: Unknown symbol snd_pcm_format_width
input: PC Speaker as /class/input/input1
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
cs: memory probe 0x60000000-0x60ffffff: clean.
pcmcia: registering new device pcmcia0.0
eth0: Asix AX88190: io 0x300, irq 3, hw_addr 00:04:5A:A5:BB:6C
snd_seq_midi_event: Unknown symbol snd_seq_expand_var_event
snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue
snd_seq_oss: Unknown symbol snd_seq_set_queue_tempo
snd_seq_oss: Unknown symbol snd_seq_delete_kernel_client
snd_seq_oss: Unknown symbol snd_seq_kernel_client_dispatch
snd_seq_oss: Unknown symbol snd_seq_kernel_client_enqueue_blocking
snd_seq_oss: Unknown symbol snd_midi_event_free
snd_seq_oss: Unknown symbol snd_midi_event_no_status
snd_seq_oss: Unknown symbol snd_use_lock_sync_helper
snd_seq_oss: Unknown symbol snd_seq_event_port_detach
snd_seq_oss: Unknown symbol snd_midi_event_new
snd_seq_oss: Unknown symbol snd_midi_event_decode
snd_seq_oss: Unknown symbol snd_seq_create_kernel_client
snd_seq_oss: Unknown symbol snd_seq_kernel_client_write_poll
snd_seq_oss: Unknown symbol snd_midi_event_encode_byte
snd_seq_oss: Unknown symbol snd_seq_kernel_client_ctl
NET: Registered protocol family 23
usbcore: registered new driver hiddev
input: Darfon USB Optical Mouse as /class/input/input2
input: USB HID v1.10 Mouse [Darfon USB Optical Mouse] on usb-0000:00:07.2-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
EXT3 FS on hda3, internal journal
Adding 1952992k swap on /dev/hda2.  Priority:-1 extents:1 across:1952992k
eth0: found link beat
eth0: autonegotiation complete: 100baseT-FD selected
eth0: no IPv6 routers present
PCI: Found IRQ 11 for device 0000:00:06.0
PCI: Sharing IRQ 11 with 0000:00:02.0
PCI: Sharing IRQ 11 with 0000:01:00.0
gameport: CS46xx Gameport is pci0000:00:06.0/gameport0, speed 1754kHz

Offline

#3 2006-04-01 18:32:01

viniosity
Member
From: New York, NY
Registered: 2005-01-22
Posts: 378
Website

Re: Alsa ThinkPad 600X problems

I can see from all the oss errors in your dmesg that your modprobe.conf needs to be emptied.  I had a weird problem with my sound that tpowa was able to guide me through.  Check it out here and see if it solves your problem:

http://bbs.archlinux.org/viewtopic.php? … highlight=

Offline

#4 2006-04-01 23:58:17

JazzplayerL9
Member
Registered: 2006-03-31
Posts: 108

Re: Alsa ThinkPad 600X problems

Sweet...actually yeah reading over that helped a bunch.  To let anyone that doesn't catch this know:

modprobe.conf loads OSS stuff for sound and when you try to install ALSA drivers for the sound, you have to go clean out your modprobe.conf...IE remove the lines that the OSS drivers want to use.  After that it works great.  Thanks viniosity.

Offline

#5 2006-05-16 07:25:10

paul_au
Member
Registered: 2006-04-13
Posts: 38

Re: Alsa ThinkPad 600X problems

Jazzplayer9:

Just to let a fellow Thinkpad 600X user know, if you experience any hardware probs (ie pcmcia card not detected, happens with my prism54 wireless card etc) then you may have to add:
pci=noacpi to your bootloader line.

Just giving you a heads up big_smile

Offline

#6 2006-05-16 10:55:00

brain0
Developer
From: Aachen - Germany
Registered: 2005-01-03
Posts: 1,382

Re: Alsa ThinkPad 600X problems

You shouldn't install alsa-driver from source over the current installation unless you know what you are doing. Alsa drivers are included in the kernel26 or kernel26beyond package. Just read the alsa wiki page.

Offline

Board footer

Powered by FluxBB