You are not logged in.
I'm having issues with the nvidia driver on a fresh install. Getting the "nvidia" package results in messed up external monitor results. The computer is an Asus G75 laptop with the nvidia GTX 670MX card, I work with two external monitors, one via VGA and one by HDMI (with an HDMI to VGA adapter). A little of background, before doing the fresh install I had no problems, the initial setup was a little of a hassle as the dsiplay array would sometimes mess up but that's about it. For some reason I think I was runinng a previous version of the driver, 340, 304 but not the nvidia-current/nvidia package.
The built in display works fin but the HDMI monitor is sort of working, nvidia-settings detect the display but every info about it is unknown and the resolution is set to 480p, the panel is a 19" 720p thing. Then we have the VGA one, this from the nvidia config appears to be ok as it displays all the info of the monitor correctly: brand, model, size and resolution; but the actual resolution on the display appears to be squished to an aspect ratio of 4:3 or limited to 1024x758.
I have tried rolling back to nvidia-340xx and many more but this always end in a bootloop. Now I'm afraid of messing up with the driver, this is the 4th time I do a fresh install, I also tried to fixing the loop chrooting without results.
Thanks in advance.
Last edited by oscarbrito (2015-11-15 06:48:12)
Offline
Someone? Please help.
Offline
Please read the forum etiquette, especially bumping.
Additional information could include (but should not be limited to):
-have you ever had 2 external monitors working? (most laptops with multiple video outputs can only use 1 at a time)
-have you tried a normal hdmi monitor? perhaps the hdmi-vga adapter is messing up the info?
Offline
Sorry for the bump, I really am.
Yes, before the fresh install everything worked like a charm so the one-output-at-a-time is discarded. I had to do the reset thanks to a problem on boot that I just couldn't fix so a fresh install turned into my solution.
Normal HDMI worked just fine. I would not blame the adapter as nothing was done to it. While the computer went through the formatting process the thing was just sitting there, plugged. And I said, before it worked just fine.
I finally did this thread because I could't find anything remotely similar or a fix anywhere.
What kind of log would help?
Offline
Check this post.
For you it would probably be dmesg and /var/log/Xorg.0.log
Offline
Here xor.log
[ 55738.239] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 55738.239] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 55738.239] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 55738.239] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 55738.239] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 55738.239] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 55738.239] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 55738.239] (II) NVIDIA(0): Config Options in the README.
[ 55738.267] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): connected
[ 55738.267] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): 400.0 MHz maximum pixel clock
[ 55738.267] (--) NVIDIA(GPU-0):
[ 55738.267] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): connected
[ 55738.267] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): Internal LVDS
[ 55738.267] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): 330.0 MHz maximum pixel clock
[ 55738.267] (--) NVIDIA(GPU-0):
[ 55738.267] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 55738.267] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 55738.267] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 55738.267] (--) NVIDIA(GPU-0):
[ 55738.293] (--) NVIDIA(GPU-0): DFP-2: connected
[ 55738.293] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 55738.293] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 55738.293] (--) NVIDIA(GPU-0):
[ 55738.293] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 55738.293] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[ 55738.293] (--) NVIDIA(GPU-0): DFP-3: 480.0 MHz maximum pixel clock
[ 55738.293] (--) NVIDIA(GPU-0):
[ 55738.345] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad foundDmesg:
[55468.481737] rtc_cmos 00:02: System wakeup disabled by ACPI
[55468.485052] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[55468.485079] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[55468.493231] sd 1:0:0:0: [sdb] Starting disk
[55468.493244] sd 0:0:0:0: [sda] Starting disk
[55468.806667] usb 2-1: reset high-speed USB device number 2 using ehci-pci
[55468.806673] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[55468.813357] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[55468.816252] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[55468.816466] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[55468.816468] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[55468.826703] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[55468.828144] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[55468.828145] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[55468.829959] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[55468.829960] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[55468.830225] ata3.00: configured for UDMA/100
[55468.836201] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[55468.836484] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[55468.836485] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[55468.846912] ata2.00: configured for UDMA/133
[55468.860338] usb 3-2: reset full-speed USB device number 7 using xhci_hcd
[55468.906511] psmouse serio4: synaptics: queried max coordinates: x [..5660], y [..4746]
[55468.940907] psmouse serio4: synaptics: queried min coordinates: x [1282..], y [1106..]
[55469.203739] usb 1-1.3: reset high-speed USB device number 3 using ehci-pci
[55469.376265] PM: resume of devices complete after 894.514 msecs
[55469.376622] PM: Finishing wakeup.
[55469.376624] Restarting tasks ... done.
[55469.385811] video LNXVIDEO:00: Restoring backlight state
[55469.429470] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[55469.444448] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[55469.447734] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[55469.463391] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[55469.511550] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[55470.025579] atl1c 0000:04:00.0: atl1c: enp4s0 NIC Link is Up<100 Mbps Full Duplex>
[55470.025591] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[55471.332136] usb 3-1: new full-speed USB device number 9 using xhci_hcd
[55471.589218] hid-generic 0003:054C:0885.000D: hiddev0,hidraw2: USB HID v1.11 Device [MDR-XB950BT] on usb-0000:00:14.0-1/input0
[55471.599060] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[55471.605479] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[55471.605530] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[55471.605532] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[55471.618223] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[55471.618271] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[55471.618273] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[55471.624589] ata1.00: configured for UDMA/133Offline
Could you please post the complete xorg.log rather than an excerpt and also any config files from /etc/X11/xorg.conf.d/
Offline
Sorry.
Complete dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.5-1-ARCH (builduser@tobias) (gcc version 5.2.0 (GCC) ) #1 SMP PREEMPT Tue Oct 27 08:13:28 CET 2015
[ 0.000000] Command line: initrd=\initramfs-linux.img root=UUID=fa376a7b-54e7-4b4d-88a3-1d17237ab40e rw quiet
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008d6dbfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008d6dc000-0x000000008dcdcfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008dcdd000-0x000000008dcdffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008dce0000-0x000000008dcf6fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008dcf7000-0x000000008dcfcfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008dcfd000-0x000000008dcfefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008dcff000-0x000000008dd08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008dd09000-0x000000008de9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008dea0000-0x000000008dea3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008dea4000-0x000000008deedfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008deee000-0x000000008df12fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008df13000-0x000000008df15fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008df16000-0x000000008df17fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008df18000-0x000000008df2efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008df2f000-0x000000008df34fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008df35000-0x000000008df3cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008df3d000-0x000000008df3dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008df3e000-0x000000008df4cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008df4d000-0x000000008df4dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008df4e000-0x000000008df58fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008df59000-0x000000008df5dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008df5e000-0x000000008df8bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008df8c000-0x000000008df8cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008df8d000-0x000000008df9cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008df9d000-0x000000008dfc3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008dfc4000-0x000000008dfd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008dfda000-0x000000008dfdafff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008dfdb000-0x000000008dfdbfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008dfdc000-0x000000008dfddfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008dfde000-0x000000008dfdffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008dfe0000-0x000000008dfe4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008dfe5000-0x000000008dff8fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008dff9000-0x000000008e5bdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008e5be000-0x000000008e83dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008e83e000-0x000000008e842fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008e843000-0x000000008e843fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008e844000-0x000000008e886fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008e887000-0x000000008ec93fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008ec94000-0x000000008eff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008eff4000-0x000000008effffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026f3fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x8c101018-0x8c126657] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000008c101017] usable
[ 0.000000] reserve setup_data: [mem 0x000000008c101018-0x000000008c126657] usable
[ 0.000000] reserve setup_data: [mem 0x000000008c126658-0x000000008d6dbfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008d6dc000-0x000000008dcdcfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000008dcdd000-0x000000008dcdffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008dce0000-0x000000008dcf6fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008dcf7000-0x000000008dcfcfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008dcfd000-0x000000008dcfefff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008dcff000-0x000000008dd08fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008dd09000-0x000000008de9ffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008dea0000-0x000000008dea3fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008dea4000-0x000000008deedfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008deee000-0x000000008df12fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008df13000-0x000000008df15fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008df16000-0x000000008df17fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008df18000-0x000000008df2efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008df2f000-0x000000008df34fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008df35000-0x000000008df3cfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008df3d000-0x000000008df3dfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008df3e000-0x000000008df4cfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008df4d000-0x000000008df4dfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008df4e000-0x000000008df58fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008df59000-0x000000008df5dfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008df5e000-0x000000008df8bfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008df8c000-0x000000008df8cfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008df8d000-0x000000008df9cfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008df9d000-0x000000008dfc3fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008dfc4000-0x000000008dfd9fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008dfda000-0x000000008dfdafff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008dfdb000-0x000000008dfdbfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008dfdc000-0x000000008dfddfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008dfde000-0x000000008dfdffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008dfe0000-0x000000008dfe4fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008dfe5000-0x000000008dff8fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008dff9000-0x000000008e5bdfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008e5be000-0x000000008e83dfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000008e83e000-0x000000008e842fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000008e843000-0x000000008e843fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008e844000-0x000000008e886fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000008e887000-0x000000008ec93fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008ec94000-0x000000008eff3fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008eff4000-0x000000008effffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000026f3fffff] usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0x8e816000 ACPI 2.0=0x8e816000 SMBIOS=0x8e0bc398
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. G75VX/G75VX, BIOS G75VX.203 10/23/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x26f400 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask F80000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 0A0000000 mask FE0000000 uncachable
[ 0.000000] 4 base 090000000 mask FF0000000 uncachable
[ 0.000000] 5 base 08FC00000 mask FFFC00000 uncachable
[ 0.000000] 6 base 270000000 mask FF0000000 uncachable
[ 0.000000] 7 base 26F800000 mask FFF800000 uncachable
[ 0.000000] 8 base 26F400000 mask FFFC00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0x8fc00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x8f000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02b36000, 0x02b36fff] PGTABLE
[ 0.000000] BRK [0x02b37000, 0x02b37fff] PGTABLE
[ 0.000000] BRK [0x02b38000, 0x02b38fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x26f200000-0x26f3fffff]
[ 0.000000] [mem 0x26f200000-0x26f3fffff] page 2M
[ 0.000000] BRK [0x02b39000, 0x02b39fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x260000000-0x26f1fffff]
[ 0.000000] [mem 0x260000000-0x26f1fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x240000000-0x25fffffff]
[ 0.000000] [mem 0x240000000-0x25fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x8d6dbfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x8d5fffff] page 2M
[ 0.000000] [mem 0x8d600000-0x8d6dbfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8dce0000-0x8dcf6fff]
[ 0.000000] [mem 0x8dce0000-0x8dcf6fff] page 4k
[ 0.000000] BRK [0x02b3a000, 0x02b3afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x8dcfd000-0x8dcfefff]
[ 0.000000] [mem 0x8dcfd000-0x8dcfefff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8dd09000-0x8de9ffff]
[ 0.000000] [mem 0x8dd09000-0x8de9ffff] page 4k
[ 0.000000] BRK [0x02b3b000, 0x02b3bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x8dea4000-0x8deedfff]
[ 0.000000] [mem 0x8dea4000-0x8deedfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8df13000-0x8df15fff]
[ 0.000000] [mem 0x8df13000-0x8df15fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8df18000-0x8df2efff]
[ 0.000000] [mem 0x8df18000-0x8df2efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8df35000-0x8df3cfff]
[ 0.000000] [mem 0x8df35000-0x8df3cfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8df3e000-0x8df4cfff]
[ 0.000000] [mem 0x8df3e000-0x8df4cfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8df4e000-0x8df58fff]
[ 0.000000] [mem 0x8df4e000-0x8df58fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8df5e000-0x8df8bfff]
[ 0.000000] [mem 0x8df5e000-0x8df8bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8df8d000-0x8df9cfff]
[ 0.000000] [mem 0x8df8d000-0x8df9cfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8dfc4000-0x8dfd9fff]
[ 0.000000] [mem 0x8dfc4000-0x8dfd9fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8dfdb000-0x8dfdbfff]
[ 0.000000] [mem 0x8dfdb000-0x8dfdbfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8dfde000-0x8dfdffff]
[ 0.000000] [mem 0x8dfde000-0x8dfdffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8dfe5000-0x8dff8fff]
[ 0.000000] [mem 0x8dfe5000-0x8dff8fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8e843000-0x8e843fff]
[ 0.000000] [mem 0x8e843000-0x8e843fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8e887000-0x8ec93fff]
[ 0.000000] [mem 0x8e887000-0x8e9fffff] page 4k
[ 0.000000] [mem 0x8ea00000-0x8ebfffff] page 2M
[ 0.000000] [mem 0x8ec00000-0x8ec93fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8eff4000-0x8effffff]
[ 0.000000] [mem 0x8eff4000-0x8effffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x23fffffff]
[ 0.000000] [mem 0x100000000-0x23fffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x7fc9f000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000008E816000 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x000000008E816080 000084 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000008E826C90 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000008E816190 010AFE (v02 _ASUS_ Notebook 00000013 INTL 20091112)
[ 0.000000] ACPI: FACS 0x000000008E83B080 000040
[ 0.000000] ACPI: APIC 0x000000008E826DA0 000092 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000008E826E38 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x000000008E826E80 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: MCFG 0x000000008E826F48 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000008E826F88 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x000000008E826FC0 00066E (v01 AhciR1 AhciTab1 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x000000008E827630 00049E (v01 AhciR2 AhciTab2 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x000000008E827AD0 00094C (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x000000008E828420 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: BGRT 0x000000008E828EB8 000038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
[ 0.000000] ACPI: MSDM 0x000000008E5BDE18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000026f3fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x26f3f1000-0x26f3f4fff]
[ 0.000000] [ffffea0000000000-ffffea0009bfffff] PMD -> [ffff880266a00000-ffff88026e9fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000026f3fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000008d6dbfff]
[ 0.000000] node 0: [mem 0x000000008dce0000-0x000000008dcf6fff]
[ 0.000000] node 0: [mem 0x000000008dcfd000-0x000000008dcfefff]
[ 0.000000] node 0: [mem 0x000000008dd09000-0x000000008de9ffff]
[ 0.000000] node 0: [mem 0x000000008dea4000-0x000000008deedfff]
[ 0.000000] node 0: [mem 0x000000008df13000-0x000000008df15fff]
[ 0.000000] node 0: [mem 0x000000008df18000-0x000000008df2efff]
[ 0.000000] node 0: [mem 0x000000008df35000-0x000000008df3cfff]
[ 0.000000] node 0: [mem 0x000000008df3e000-0x000000008df4cfff]
[ 0.000000] node 0: [mem 0x000000008df4e000-0x000000008df58fff]
[ 0.000000] node 0: [mem 0x000000008df5e000-0x000000008df8bfff]
[ 0.000000] node 0: [mem 0x000000008df8d000-0x000000008df9cfff]
[ 0.000000] node 0: [mem 0x000000008dfc4000-0x000000008dfd9fff]
[ 0.000000] node 0: [mem 0x000000008dfdb000-0x000000008dfdbfff]
[ 0.000000] node 0: [mem 0x000000008dfde000-0x000000008dfdffff]
[ 0.000000] node 0: [mem 0x000000008dfe5000-0x000000008dff8fff]
[ 0.000000] node 0: [mem 0x000000008e843000-0x000000008e843fff]
[ 0.000000] node 0: [mem 0x000000008e887000-0x000000008ec93fff]
[ 0.000000] node 0: [mem 0x000000008eff4000-0x000000008effffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000026f3fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026f3fffff]
[ 0.000000] On node 0 totalpages: 2085172
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9015 pages used for memmap
[ 0.000000] DMA32 zone: 576919 pages, LIFO batch:31
[ 0.000000] Normal zone: 23504 pages used for memmap
[ 0.000000] Normal zone: 1504256 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8c101000-0x8c101fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8c126000-0x8c126fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8d6dc000-0x8dcdcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8dcdd000-0x8dcdffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8dcf7000-0x8dcfcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8dcff000-0x8dd08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8dea0000-0x8dea3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8deee000-0x8df12fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8df16000-0x8df17fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8df2f000-0x8df34fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8df3d000-0x8df3dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8df4d000-0x8df4dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8df59000-0x8df5dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8df8c000-0x8df8cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8df9d000-0x8dfc3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8dfda000-0x8dfdafff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8dfdc000-0x8dfddfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8dfe0000-0x8dfe4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8dff9000-0x8e5bdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8e5be000-0x8e83dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8e83e000-0x8e842fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8e844000-0x8e886fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8ec94000-0x8eff3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x8f000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88026f000000 s91480 r8192 d31400 u262144
[ 0.000000] pcpu-alloc: s91480 r8192 d31400 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2052567
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=UUID=fa376a7b-54e7-4b4d-88a3-1d17237ab40e rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8104556K/8340688K available (5611K kernel code, 922K rwdata, 1768K rodata, 1180K init, 1152K bss, 236132K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.568 MHz processor
[ 0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.68 BogoMIPS (lpj=7981893)
[ 0.000037] pid_max: default: 32768 minimum: 301
[ 0.000041] ACPI: Core revision 20150619
[ 0.012578] ACPI: All ACPI Tables successfully acquired
[ 0.013108] Security Framework initialized
[ 0.013110] Yama: becoming mindful.
[ 0.013582] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.015595] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.016510] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.016520] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.016711] Initializing cgroup subsys blkio
[ 0.016714] Initializing cgroup subsys memory
[ 0.016720] Initializing cgroup subsys devices
[ 0.016723] Initializing cgroup subsys freezer
[ 0.016724] Initializing cgroup subsys net_cls
[ 0.016745] CPU: Physical Processor ID: 0
[ 0.016746] CPU: Processor Core ID: 0
[ 0.016750] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.016751] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.017121] mce: CPU supports 9 MCE banks
[ 0.017134] CPU0: Thermal monitoring enabled (TM1)
[ 0.017142] process: using mwait in idle threads
[ 0.017145] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.017146] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.017546] Freeing SMP alternatives memory: 20K (ffffffff81a0f000 - ffffffff81a14000)
[ 0.019228] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.019802] ftrace: allocating 22161 entries in 87 pages
[ 0.030074] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.030516] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063552] TSC deadline timer enabled
[ 0.063556] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
[ 0.063577] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.063597] ... version: 3
[ 0.063598] ... bit width: 48
[ 0.063598] ... generic registers: 4
[ 0.063599] ... value mask: 0000ffffffffffff
[ 0.063600] ... max period: 0000ffffffffffff
[ 0.063601] ... fixed-purpose events: 3
[ 0.063602] ... event mask: 000000070000000f
[ 0.076981] x86: Booting SMP configuration:
[ 0.076983] .... node #0, CPUs: #1
[ 0.080621] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.083916] #2 #3 #4 #5 #6 #7
[ 0.122760] x86: Booted up 1 node, 8 CPUs
[ 0.122764] smpboot: Total of 8 processors activated (38328.46 BogoMIPS)
[ 0.130022] devtmpfs: initialized
[ 0.132643] PM: Registering ACPI NVS region [mem 0x8d6dc000-0x8dcdcfff] (6295552 bytes)
[ 0.132708] PM: Registering ACPI NVS region [mem 0x8e5be000-0x8e83dfff] (2621440 bytes)
[ 0.132736] PM: Registering ACPI NVS region [mem 0x8e844000-0x8e886fff] (274432 bytes)
[ 0.132825] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.132910] pinctrl core: initialized pinctrl subsystem
[ 0.132954] RTC time: 3:23:50, date: 11/07/15
[ 0.133064] NET: Registered protocol family 16
[ 0.146507] cpuidle: using governor ladder
[ 0.159861] cpuidle: using governor menu
[ 0.159946] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.159948] ACPI: bus type PCI registered
[ 0.159950] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.160018] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.160021] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.160026] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.160108] PCI: Using configuration type 1 for base access
[ 0.160409] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.176863] ACPI: Added _OSI(Module Device)
[ 0.176865] ACPI: Added _OSI(Processor Device)
[ 0.176866] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.176867] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.178632] ACPI : EC: EC description table is found, configuring boot EC
[ 0.178643] ACPI : EC: EC started
[ 0.180460] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.184325] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.184662] ACPI: Dynamic OEM Table Load:
[ 0.184669] ACPI: SSDT 0xFFFF880265342000 000853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.185318] ACPI: Dynamic OEM Table Load:
[ 0.185323] ACPI: SSDT 0xFFFF8802652CBC00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.185903] ACPI: Dynamic OEM Table Load:
[ 0.185907] ACPI: SSDT 0xFFFF8802652F9800 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.187463] ACPI: Interpreter enabled
[ 0.187471] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[ 0.187475] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[ 0.187490] ACPI: (supports S0 S3 S4 S5)
[ 0.187491] ACPI: Using IOAPIC for interrupt routing
[ 0.187515] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.193613] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.193618] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.193837] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.193967] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.193968] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.194345] PCI host bridge to bus 0000:00
[ 0.194348] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.194350] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.194353] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.194355] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.194356] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.194358] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.194359] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.194361] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.194362] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.194364] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.194366] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.194367] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.194369] pci_bus 0000:00: root bus resource [mem 0x8fc00000-0xfeafffff window]
[ 0.194376] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.194465] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.194497] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.194540] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.194602] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.194635] pci 0000:00:14.0: reg 0x10: [mem 0xf5300000-0xf530ffff 64bit]
[ 0.194693] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.194736] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.194777] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.194811] pci 0000:00:16.0: reg 0x10: [mem 0xf531b000-0xf531b00f 64bit]
[ 0.194872] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.194957] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.194987] pci 0000:00:1a.0: reg 0x10: [mem 0xf5318000-0xf53183ff]
[ 0.195058] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.195101] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.195142] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.195170] pci 0000:00:1b.0: reg 0x10: [mem 0xf5310000-0xf5313fff 64bit]
[ 0.195230] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.195274] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.195315] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.195388] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.195435] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.195473] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.195547] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.195627] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[ 0.195701] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.195746] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.195788] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[ 0.195903] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.195954] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.195996] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.196026] pci 0000:00:1d.0: reg 0x10: [mem 0xf5317000-0xf53173ff]
[ 0.196097] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.196140] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.196179] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 0.196350] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.196375] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
[ 0.196383] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
[ 0.196391] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
[ 0.196399] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
[ 0.196407] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.196416] pci 0000:00:1f.2: reg 0x24: [mem 0xf5316000-0xf53167ff]
[ 0.196445] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.196521] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.196539] pci 0000:00:1f.3: reg 0x10: [mem 0xf5315000-0xf53150ff 64bit]
[ 0.196560] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.196701] pci 0000:01:00.0: [10de:11a1] type 00 class 0x030000
[ 0.196721] pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf4ffffff]
[ 0.196732] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.196742] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.196749] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.196757] pci 0000:01:00.0: reg 0x30: [mem 0xf5000000-0xf507ffff pref]
[ 0.196857] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
[ 0.196877] pci 0000:01:00.1: reg 0x10: [mem 0xf5080000-0xf5083fff]
[ 1.204817] pci 0000:00:01.0: ASPM: Could not configure common clock
[ 1.204854] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.204857] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 1.204859] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf50fffff]
[ 1.204863] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 1.204914] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.205001] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[ 1.205053] pci 0000:03:00.0: reg 0x10: [mem 0xf5200000-0xf527ffff 64bit]
[ 1.205118] pci 0000:03:00.0: reg 0x30: [mem 0xf5280000-0xf528ffff pref]
[ 1.205173] pci 0000:03:00.0: supports D1 D2
[ 1.205175] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.205206] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 1.211514] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 1.211534] pci 0000:00:1c.1: bridge window [mem 0xf5200000-0xf52fffff]
[ 1.211612] pci 0000:04:00.0: [1969:1083] type 00 class 0x020000
[ 1.211667] pci 0000:04:00.0: reg 0x10: [mem 0xf5100000-0xf513ffff 64bit]
[ 1.211682] pci 0000:04:00.0: reg 0x18: [io 0xd000-0xd07f]
[ 1.211783] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.211817] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 1.218195] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 1.218211] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 1.218215] pci 0000:00:1c.3: bridge window [mem 0xf5100000-0xf51fffff]
[ 1.218302] acpiphp: Slot [1] registered
[ 1.218309] pci 0000:00:1c.4: PCI bridge to [bus 05-3d]
[ 1.218318] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xf3ffffff]
[ 1.218326] pci 0000:00:1c.4: bridge window [mem 0x90000000-0xbfffffff 64bit pref]
[ 1.218830] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 1.218878] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.218923] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.218966] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.219009] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.219052] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.219094] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.219137] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.219276] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 1.219342] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 1.219441] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 1.219443] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.219444] vgaarb: loaded
[ 1.219445] vgaarb: bridge control possible 0000:01:00.0
[ 1.219624] PCI: Using ACPI for IRQ routing
[ 1.222763] PCI: pci_cache_line_size set to 64 bytes
[ 1.222836] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 1.222837] e820: reserve RAM buffer [mem 0x8c101018-0x8fffffff]
[ 1.222843] e820: reserve RAM buffer [mem 0x8d6dc000-0x8fffffff]
[ 1.222849] e820: reserve RAM buffer [mem 0x8dcf7000-0x8fffffff]
[ 1.222854] e820: reserve RAM buffer [mem 0x8dcff000-0x8fffffff]
[ 1.222859] e820: reserve RAM buffer [mem 0x8dea0000-0x8fffffff]
[ 1.222864] e820: reserve RAM buffer [mem 0x8deee000-0x8fffffff]
[ 1.222868] e820: reserve RAM buffer [mem 0x8df16000-0x8fffffff]
[ 1.222873] e820: reserve RAM buffer [mem 0x8df2f000-0x8fffffff]
[ 1.222877] e820: reserve RAM buffer [mem 0x8df3d000-0x8fffffff]
[ 1.222882] e820: reserve RAM buffer [mem 0x8df4d000-0x8fffffff]
[ 1.222886] e820: reserve RAM buffer [mem 0x8df59000-0x8fffffff]
[ 1.222890] e820: reserve RAM buffer [mem 0x8df8c000-0x8fffffff]
[ 1.222893] e820: reserve RAM buffer [mem 0x8df9d000-0x8fffffff]
[ 1.222897] e820: reserve RAM buffer [mem 0x8dfda000-0x8fffffff]
[ 1.222900] e820: reserve RAM buffer [mem 0x8dfdc000-0x8fffffff]
[ 1.222903] e820: reserve RAM buffer [mem 0x8dfe0000-0x8fffffff]
[ 1.222906] e820: reserve RAM buffer [mem 0x8dff9000-0x8fffffff]
[ 1.222908] e820: reserve RAM buffer [mem 0x8e844000-0x8fffffff]
[ 1.222910] e820: reserve RAM buffer [mem 0x8ec94000-0x8fffffff]
[ 1.222912] e820: reserve RAM buffer [mem 0x8f000000-0x8fffffff]
[ 1.222913] e820: reserve RAM buffer [mem 0x26f400000-0x26fffffff]
[ 1.223019] NetLabel: Initializing
[ 1.223020] NetLabel: domain hash size = 128
[ 1.223021] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.223032] NetLabel: unlabeled traffic allowed by default
[ 1.223060] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.223064] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.225097] clocksource: Switched to clocksource hpet
[ 1.229914] pnp: PnP ACPI init
[ 1.230010] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 1.230014] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.230135] system 00:01: [io 0x0680-0x069f] has been reserved
[ 1.230139] system 00:01: [io 0x1000-0x100f] has been reserved
[ 1.230140] system 00:01: [io 0xffff] has been reserved
[ 1.230142] system 00:01: [io 0xffff] has been reserved
[ 1.230144] system 00:01: [io 0x0400-0x0453] could not be reserved
[ 1.230145] system 00:01: [io 0x0458-0x047f] has been reserved
[ 1.230147] system 00:01: [io 0x0500-0x057f] has been reserved
[ 1.230149] system 00:01: [io 0x164e-0x164f] has been reserved
[ 1.230151] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.230174] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.230220] system 00:03: [io 0x0454-0x0457] has been reserved
[ 1.230223] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.230267] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 1.230270] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.230322] pnp 00:05: Plug and Play ACPI device, IDs SYN0a2a SYN0a00 SYN0002 PNP0f13 (active)
[ 1.230355] pnp 00:06: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 1.230501] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.230503] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.230505] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.230507] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.230509] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.230511] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.230512] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.230514] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.230516] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 1.230518] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.230521] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.230636] pnp: PnP ACPI: found 8 devices
[ 1.236971] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.237019] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 05-3d] add_size 1000
[ 1.237023] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 1.237024] pci 0000:00:1c.4: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 1.237028] pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff]
[ 1.237031] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.237033] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 1.237036] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf50fffff]
[ 1.237039] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 1.237042] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.237054] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 1.237060] pci 0000:00:1c.1: bridge window [mem 0xf5200000-0xf52fffff]
[ 1.237068] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 1.237071] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 1.237077] pci 0000:00:1c.3: bridge window [mem 0xf5100000-0xf51fffff]
[ 1.237085] pci 0000:00:1c.4: PCI bridge to [bus 05-3d]
[ 1.237088] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 1.237095] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xf3ffffff]
[ 1.237100] pci 0000:00:1c.4: bridge window [mem 0x90000000-0xbfffffff 64bit pref]
[ 1.237109] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.237111] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.237113] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.237115] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 1.237116] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 1.237118] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 1.237119] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 1.237121] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 1.237123] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 1.237124] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 1.237126] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 1.237127] pci_bus 0000:00: resource 15 [mem 0x8fc00000-0xfeafffff window]
[ 1.237129] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.237131] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf50fffff]
[ 1.237132] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 1.237134] pci_bus 0000:03: resource 1 [mem 0xf5200000-0xf52fffff]
[ 1.237136] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 1.237137] pci_bus 0000:04: resource 1 [mem 0xf5100000-0xf51fffff]
[ 1.237139] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 1.237141] pci_bus 0000:05: resource 1 [mem 0xdc000000-0xf3ffffff]
[ 1.237142] pci_bus 0000:05: resource 2 [mem 0x90000000-0xbfffffff 64bit pref]
[ 1.237171] NET: Registered protocol family 2
[ 1.237341] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.237481] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.237601] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.237624] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.237651] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.237706] NET: Registered protocol family 1
[ 1.238209] pci 0000:01:00.0: Video device with shadowed ROM
[ 1.238223] PCI: CLS 64 bytes, default 64
[ 1.238267] Unpacking initramfs...
[ 1.296701] Freeing initrd memory: 3460K (ffff88007fc9f000 - ffff880080000000)
[ 1.296711] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.296713] software IO TLB [mem 0x88101000-0x8c101000] (64MB) mapped at [ffff880088101000-ffff88008c100fff]
[ 1.296765] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 1.296767] hw unit of domain pp0-core 2^-16 Joules
[ 1.296768] hw unit of domain package 2^-16 Joules
[ 1.296769] hw unit of domain pp1-gpu 2^-16 Joules
[ 1.296898] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[ 1.296906] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ 1.296914] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 1.296922] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 1.296930] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15
[ 1.296940] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15
[ 1.296947] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15
[ 1.296953] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15
[ 1.296996] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.297073] Scanning for low memory corruption every 60 seconds
[ 1.297328] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.297347] Initialise system trusted keyring
[ 1.297714] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.299041] zpool: loaded
[ 1.299043] zbud: loaded
[ 1.299206] VFS: Disk quotas dquot_6.6.0
[ 1.299237] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.299376] Key type big_key registered
[ 1.299506] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.299554] io scheduler noop registered
[ 1.299557] io scheduler deadline registered
[ 1.299586] io scheduler cfq registered (default)
[ 1.300224] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.300230] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.300244] efifb: probing for efifb
[ 1.300266] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90001000000, using 8100k, total 8100k
[ 1.300267] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 1.300268] efifb: scrolling: redraw
[ 1.300270] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.305034] Console: switching to colour frame buffer device 240x67
[ 1.309668] fb0: EFI VGA frame buffer device
[ 1.309677] intel_idle: MWAIT substates: 0x21120
[ 1.309679] intel_idle: v0.4 model 0x3A
[ 1.309680] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.309975] GHES: HEST is not enabled!
[ 1.310036] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.310422] Linux agpgart interface v0.103
[ 1.310958] rtc_cmos 00:02: RTC can wake from S4
[ 1.311078] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.311106] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.311117] Intel P-state driver initializing.
[ 1.311307] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.311884] NET: Registered protocol family 10
[ 1.312261] NET: Registered protocol family 17
[ 1.313166] Loading compiled-in X.509 certificates
[ 1.313190] registered taskstats version 1
[ 1.313207] zswap: loading zswap
[ 1.313211] zswap: using zbud pool
[ 1.313221] zswap: using lzo compressor
[ 1.314104] Magic number: 7:693:360
[ 1.314244] rtc_cmos 00:02: setting system clock to 2015-11-07 03:23:51 UTC (1446866631)
[ 1.314515] PM: Hibernation image not present or could not be loaded.
[ 1.315030] Freeing unused kernel memory: 1180K (ffffffff818e8000 - ffffffff81a0f000)
[ 1.315032] Write protecting the kernel read-only data: 8192k
[ 1.315590] Freeing unused kernel memory: 520K (ffff88000257e000 - ffff880002600000)
[ 1.315743] Freeing unused kernel memory: 280K (ffff8800027ba000 - ffff880002800000)
[ 1.326925] random: systemd-tmpfile urandom read with 2 bits of entropy available
[ 1.373639] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.375507] i8042: Detected active multiplexing controller, rev 1.1
[ 1.376871] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.376933] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.376972] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.377019] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.377054] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.379912] ACPI: bus type USB registered
[ 1.379946] usbcore: registered new interface driver usbfs
[ 1.379959] usbcore: registered new interface driver hub
[ 1.380006] usbcore: registered new device driver usb
[ 1.380556] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.381002] ehci-pci: EHCI PCI platform driver
[ 1.381229] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.381238] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.381256] ehci-pci 0000:00:1a.0: debug port 2
[ 1.382361] SCSI subsystem initialized
[ 1.384045] libata version 3.00 loaded.
[ 1.385181] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.385198] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf5318000
[ 1.391946] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.392250] hub 1-0:1.0: USB hub found
[ 1.392262] hub 1-0:1.0: 2 ports detected
[ 1.392574] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.392584] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.392600] ehci-pci 0000:00:1d.0: debug port 2
[ 1.396512] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.396528] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf5317000
[ 1.405297] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.405500] hub 2-0:1.0: USB hub found
[ 1.405510] hub 2-0:1.0: 2 ports detected
[ 1.405812] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.405823] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.405929] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[ 1.405938] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.406219] hub 3-0:1.0: USB hub found
[ 1.406232] hub 3-0:1.0: 4 ports detected
[ 1.406365] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.406369] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.406521] hub 4-0:1.0: USB hub found
[ 1.406532] hub 4-0:1.0: 4 ports detected
[ 1.406678] ahci 0000:00:1f.2: version 3.0
[ 1.418729] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 1.418735] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.433016] scsi host0: ahci
[ 1.433338] scsi host1: ahci
[ 1.433677] scsi host2: ahci
[ 1.434007] scsi host3: ahci
[ 1.434320] scsi host4: ahci
[ 1.434576] scsi host5: ahci
[ 1.434660] ata1: SATA max UDMA/133 abar m2048@0xf5316000 port 0xf5316100 irq 26
[ 1.434664] ata2: SATA max UDMA/133 abar m2048@0xf5316000 port 0xf5316180 irq 26
[ 1.434668] ata3: SATA max UDMA/133 abar m2048@0xf5316000 port 0xf5316200 irq 26
[ 1.434669] ata4: DUMMY
[ 1.434671] ata5: DUMMY
[ 1.434672] ata6: DUMMY
[ 1.440476] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.698937] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.712298] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.752332] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.752365] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.752397] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.756742] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.756749] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.757118] ata3.00: ATAPI: Slimtype DVD A DS8A8SH, KAA3, max UDMA/100
[ 1.758851] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.758968] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.758974] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.763931] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.763987] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.763991] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.764222] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.764229] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.764587] ata3.00: configured for UDMA/100
[ 1.765361] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10001, max UDMA/133
[ 1.765368] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.765622] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[ 1.772117] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.772198] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.772204] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.774373] ata2.00: ATA-8: ADATA SX900, 5.0.7a, max UDMA/133
[ 1.774380] ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.778661] ata1.00: configured for UDMA/133
[ 1.779036] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5
[ 1.783976] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.784036] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.784041] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.794404] ata2.00: configured for UDMA/133
[ 1.794722] scsi 1:0:0:0: Direct-Access ATA ADATA SX900 7a PQ: 0 ANSI: 5
[ 1.799586] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8A8SH KAA3 PQ: 0 ANSI: 5
[ 1.817556] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.817561] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.817665] sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.817670] sd 0:0:0:0: [sda] Write Protect is off
[ 1.817675] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.817716] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.817746] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.817753] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.817772] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.818648] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8
[ 1.819150] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.822941] hub 1-1:1.0: USB hub found
[ 1.823132] hub 1-1:1.0: 6 ports detected
[ 1.835069] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.835075] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.835314] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.836278] hub 2-1:1.0: USB hub found
[ 1.836367] hub 2-1:1.0: 8 ports detected
[ 1.873360] sda: sda1
[ 1.874209] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.942339] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.944087] usbcore: registered new interface driver usbhid
[ 1.944090] usbhid: USB HID core driver
[ 1.944607] input: Logitech Gaming Mouse G402 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:046D:C07E.0001/input/input5
[ 1.944653] hid-generic 0003:046D:C07E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G402] on usb-0000:00:14.0-2/input0
[ 1.945437] input: Logitech Gaming Mouse G402 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:046D:C07E.0002/input/input6
[ 1.996123] hid-generic 0003:046D:C07E.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G402] on usb-0000:00:14.0-2/input1
[ 2.089284] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 2.174241] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[ 2.222846] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.231582] systemd[1]: systemd 227 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 2.231797] systemd[1]: Detected architecture x86-64.
[ 2.232583] systemd[1]: Set hostname to <M416>.
[ 2.287886] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.288219] systemd[1]: Created slice User and Session Slice.
[ 2.288263] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 2.288305] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.288335] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.288372] systemd[1]: Listening on Journal Socket.
[ 2.288417] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.288430] systemd[1]: Reached target Encrypted Volumes.
[ 2.291173] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.291303] systemd[1]: Created slice System Slice.
[ 2.291325] systemd[1]: Reached target Slices.
[ 2.291786] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 2.292191] systemd[1]: Mounting Debug File System...
[ 2.293475] systemd[1]: Mounting Temporary Directory...
[ 2.293890] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.294058] systemd[1]: Created slice system-getty.slice.
[ 2.295189] systemd[1]: Starting Load Kernel Modules...
[ 2.295647] systemd[1]: Mounting Huge Pages File System...
[ 2.295707] systemd[1]: Listening on udev Control Socket.
[ 2.296041] tsc: Refined TSC clocksource calibration: 2394.561 MHz
[ 2.296044] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22842564e28, max_idle_ns: 440795246705 ns
[ 2.296159] systemd[1]: Starting Setup Virtual Console...
[ 2.296522] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 2.296564] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.297007] systemd[1]: Starting Journal Service...
[ 2.298208] systemd[1]: Starting Set Up Additional Binary Formats...
[ 2.298239] systemd[1]: Reached target Remote File Systems.
[ 2.298306] systemd[1]: Listening on udev Kernel Socket.
[ 2.299514] EXT4-fs (sdb7): re-mounted. Opts: discard
[ 2.299958] systemd[1]: Mounted Debug File System.
[ 2.299986] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.300001] systemd[1]: Mounted Huge Pages File System.
[ 2.300015] systemd[1]: Mounted Temporary Directory.
[ 2.300203] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 2.300591] systemd[1]: Started Remount Root and Kernel File Systems.
[ 2.301483] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 211 (systemd-binfmt)
[ 2.302838] FS-Cache: Loaded
[ 2.307875] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[ 2.309307] RPC: Registered named UNIX socket transport module.
[ 2.309310] RPC: Registered udp transport module.
[ 2.309311] RPC: Registered tcp transport module.
[ 2.309311] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.310205] systemd[1]: Starting udev Coldplug all Devices...
[ 2.310703] systemd[1]: Starting Load/Save Random Seed...
[ 2.311118] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 2.311850] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[ 2.314450] systemd[1]: Started Set Up Additional Binary Formats.
[ 2.314902] systemd[1]: Started Load/Save Random Seed.
[ 2.319634] FS-Cache: Netfs 'nfs' registered for caching
[ 2.320305] systemd[1]: Started Load Kernel Modules.
[ 2.320737] systemd[1]: Mounting Configuration File System...
[ 2.321133] systemd[1]: Starting Apply Kernel Variables...
[ 2.322442] systemd[1]: Mounted Configuration File System.
[ 2.327169] systemd[1]: Started Setup Virtual Console.
[ 2.329910] systemd[1]: Started Apply Kernel Variables.
[ 2.331910] systemd[1]: Started Create Static Device Nodes in /dev.
[ 2.332314] systemd[1]: Starting udev Kernel Device Manager...
[ 2.332330] systemd[1]: Reached target Local File Systems (Pre).
[ 2.341833] systemd[1]: Started udev Coldplug all Devices.
[ 2.373779] systemd[1]: Started udev Kernel Device Manager.
[ 2.387000] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input7
[ 2.388120] ACPI: AC Adapter [AC0] (on-line)
[ 2.391401] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 2.394921] ACPI: Battery Slot [BAT0] (battery absent)
[ 2.401667] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.402151] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.402154] ACPI: Thermal Zone [THRM] (43 C)
[ 2.416215] ACPI: Lid Switch [LID]
[ 2.416273] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8
[ 2.416277] ACPI: Sleep Button [SLPB]
[ 2.416314] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
[ 2.416315] ACPI: Power Button [PWRF]
[ 2.416370] wmi: Mapper loaded
[ 2.420781] systemd[1]: Started Journal Service.
[ 2.423219] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000044F (\GPIS) (20150619/utaddress-254)
[ 2.423225] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150619/utaddress-254)
[ 2.423229] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.423233] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20150619/utaddress-254)
[ 2.423236] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20150619/utaddress-254)
[ 2.423239] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.423240] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20150619/utaddress-254)
[ 2.423243] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20150619/utaddress-254)
[ 2.423247] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.423248] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20150619/utaddress-254)
[ 2.423252] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20150619/utaddress-254)
[ 2.423255] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.423256] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.426551] systemd-journald[206]: Received request to flush runtime journal from PID 1
[ 2.436762] ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\SMB0) (20150619/utaddress-254)
[ 2.436769] ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI) (20150619/utaddress-254)
[ 2.436774] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.440875] mousedev: PS/2 mouse device common for all mice
[ 2.441227] [drm] Initialized drm 1.1.0 20060810
[ 2.441264] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 2.447881] AVX version of gcm_enc/dec engaged.
[ 2.447884] AES CTR mode by8 optimization enabled
[ 2.454428] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 2.454437] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 2.464218] atl1c 0000:04:00.0: version 1.0.1.1-NAPI
[ 2.479903] acpi device:05: registered as cooling_device8
[ 2.493224] iTCO_vendor_support: vendor-support=0
[ 2.494435] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=2 (0x14/0x17/0x0/0x0/0x0) type:speaker
[ 2.494437] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.494439] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 2.494440] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 2.494441] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 2.494442] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 2.494443] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 2.494445] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 2.495240] media: Linux media interface: v0.10
[ 2.496147] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.496222] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.496830] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.504159] ath: phy0: Disable PLL PowerSave
[ 2.504778] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 2.504847] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 2.505342] Adding 1023996k swap on /dev/sdb6. Priority:-1 extents:1 across:1023996k SSFS
[ 2.505396] Linux video capture interface: v2.00
[ 2.508889] intel_rapl: Found RAPL domain package
[ 2.508891] intel_rapl: Found RAPL domain core
[ 2.511333] cfg80211: World regulatory domain updated:
[ 2.511336] cfg80211: DFS Master region: unset
[ 2.511338] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2.511340] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.511342] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.511344] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.511346] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 2.511349] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 2.511350] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 2.511352] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.511354] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 2.511609] atl1c 0000:04:00.0 enp4s0: renamed from eth0
[ 2.511933] ath: phy0: Enable LNA combining
[ 2.512827] uvcvideo: Found UVC 1.00 device ASUS USB2.0 Webcam (1bcf:2885)
[ 2.514461] ath: phy0: ASPM enabled: 0x42
[ 2.514464] ath: EEPROM regdomain: 0x60
[ 2.514465] ath: EEPROM indicates we should expect a direct regpair map
[ 2.514467] ath: Country alpha2 being used: 00
[ 2.514468] ath: Regpair used: 0x60
[ 2.523799] nvidia: module license 'NVIDIA' taints kernel.
[ 2.523802] Disabling lock debugging due to kernel taint
[ 2.530304] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.530470] NVLINK: Nvlink Core is being initialized, major device number 246
[ 2.530582] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 2.530587] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 355.11 Wed Aug 26 16:35:41 PDT 2015
[ 2.531331] input: ASUS USB2.0 Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input17
[ 2.531399] usbcore: registered new interface driver uvcvideo
[ 2.531401] USB Video Class driver (1.1.1)
[ 2.557796] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 2.558019] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90001800000, irq=17
[ 2.559715] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[ 2.563307] acpi device:08: registered as cooling_device10
[ 2.563885] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input18
[ 2.566675] asus_wmi: ASUS WMI generic driver loaded
[ 2.567404] asus_wmi: Initialization: 0x1
[ 2.567425] asus_wmi: BIOS WMI version: 7.9
[ 2.567449] asus_wmi: SFUN value: 0x4a0877
[ 2.567988] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input19
[ 2.587376] asus_wmi: Number of fans: 1
[ 2.630269] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 2.646028] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 2.657424] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2.672310] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2.741127] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 2.741158] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 2.741171] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 2.741183] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 2.741202] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 2.741214] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 2.741225] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 2.741239] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 2.741266] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 2.759989] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2.825240] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[ 2.825343] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[ 2.892935] psmouse serio4: synaptics: queried max coordinates: x [..5660], y [..4746]
[ 2.920092] psmouse serio4: synaptics: queried min coordinates: x [1282..], y [1106..]
[ 2.971402] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00/0x0, board id: 2442, fw id: 1203667
[ 3.004318] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input14
[ 3.029108] ACPI Warning: \_SB_.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[ 3.297086] clocksource: Switched to clocksource tsc
[ 3.335912] random: nonblocking pool is initialized
[ 3.981991] atl1c 0000:04:00.0: atl1c: enp4s0 NIC Link is Up<100 Mbps Full Duplex>
[ 3.982003] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[ 5.392347] fuse init (API version 7.23)Complete xorg.log
[ 2.644]
X.Org X Server 1.17.4
Release Date: 2015-10-28
[ 2.644] X Protocol Version 11, Revision 0
[ 2.644] Build Operating System: Linux 4.2.3-1-ARCH x86_64
[ 2.644] Current Operating System: Linux M416 4.2.5-1-ARCH #1 SMP PREEMPT Tue Oct 27 08:13:28 CET 2015 x86_64
[ 2.644] Kernel command line: initrd=\initramfs-linux.img root=UUID=fa376a7b-54e7-4b4d-88a3-1d17237ab40e rw quiet
[ 2.644] Build Date: 31 October 2015 06:38:45AM
[ 2.644]
[ 2.644] Current version of pixman: 0.32.8
[ 2.644] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2.644] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2.644] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 6 21:23:52 2015
[ 2.645] (==) Using config file: "/etc/X11/xorg.conf"
[ 2.645] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2.645] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2.647] (==) ServerLayout "Layout0"
[ 2.647] (**) |-->Screen "Screen0" (0)
[ 2.647] (**) | |-->Monitor "Monitor0"
[ 2.647] (**) | |-->Device "Device0"
[ 2.647] (**) |-->Input Device "Keyboard0"
[ 2.647] (**) |-->Input Device "Mouse0"
[ 2.647] (**) Option "DontZap" "false"
[ 2.647] (==) Automatically adding devices
[ 2.647] (==) Automatically enabling devices
[ 2.647] (==) Automatically adding GPU devices
[ 2.665] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2.665] Entry deleted from font path.
[ 2.665] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2.665] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2.665] Entry deleted from font path.
[ 2.665] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2.665] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 2.665] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2.665] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 2.665] (WW) Disabling Keyboard0
[ 2.665] (WW) Disabling Mouse0
[ 2.665] (II) Loader magic: 0x817d60
[ 2.665] (II) Module ABI versions:
[ 2.665] X.Org ANSI C Emulation: 0.4
[ 2.665] X.Org Video Driver: 19.0
[ 2.665] X.Org XInput driver : 21.1
[ 2.665] X.Org Server Extension : 9.0
[ 2.667] (EE) systemd-logind: failed to get session: PID 388 does not belong to any known session
[ 2.667] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2.668] (--) PCI:*(0:1:0:0) 10de:11a1:1043:10ad rev 161, Mem @ 0xf4000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 2.668] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2.669] (II) LoadModule: "glx"
[ 2.671] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2.711] (II) Module glx: vendor="NVIDIA Corporation"
[ 2.711] compiled for 4.0.2, module version = 1.0.0
[ 2.711] Module class: X.Org Server Extension
[ 2.711] (II) NVIDIA GLX Module 355.11 Wed Aug 26 16:02:11 PDT 2015
[ 2.712] (II) LoadModule: "nvidia"
[ 2.714] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 2.719] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 2.719] compiled for 4.0.2, module version = 1.0.0
[ 2.719] Module class: X.Org Video Driver
[ 2.720] (II) NVIDIA dlloader X Driver 355.11 Wed Aug 26 15:38:55 PDT 2015
[ 2.720] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 2.720] (++) using VT number 7
[ 2.725] (II) Loading sub module "fb"
[ 2.725] (II) LoadModule: "fb"
[ 2.725] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2.726] (II) Module fb: vendor="X.Org Foundation"
[ 2.726] compiled for 1.17.4, module version = 1.0.0
[ 2.726] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2.726] (II) Loading sub module "wfb"
[ 2.726] (II) LoadModule: "wfb"
[ 2.726] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 2.726] (II) Module wfb: vendor="X.Org Foundation"
[ 2.726] compiled for 1.17.4, module version = 1.0.0
[ 2.726] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2.727] (II) Loading sub module "ramdac"
[ 2.727] (II) LoadModule: "ramdac"
[ 2.727] (II) Module "ramdac" already built-in
[ 2.728] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 2.728] (==) NVIDIA(0): RGB weight 888
[ 2.728] (==) NVIDIA(0): Default visual is TrueColor
[ 2.728] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2.728] (**) NVIDIA(0): Enabling 2D acceleration
[ 3.227] (II) NVIDIA: Allocated GPU:0 (GPU-fd57d341-bd2d-6b40-9085-9d9e2817e882) @
[ 3.227] (II) NVIDIA: PCI:0000:01:00.0
[ 3.264] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 3.264] (--) NVIDIA(0): CRT-0
[ 3.264] (--) NVIDIA(0): DFP-0 (boot)
[ 3.264] (--) NVIDIA(0): DFP-1
[ 3.264] (--) NVIDIA(0): DFP-2
[ 3.264] (--) NVIDIA(0): DFP-3
[ 3.274] (--) NVIDIA(0): BenQ G925HDA (CRT-0): connected
[ 3.274] (--) NVIDIA(0): BenQ G925HDA (CRT-0): 400.0 MHz maximum pixel clock
[ 3.274] (--) NVIDIA(0):
[ 3.274] (--) NVIDIA(0): AU Optronics Corporation (DFP-0): connected
[ 3.274] (--) NVIDIA(0): AU Optronics Corporation (DFP-0): Internal LVDS
[ 3.274] (--) NVIDIA(0): AU Optronics Corporation (DFP-0): 330.0 MHz maximum pixel clock
[ 3.274] (--) NVIDIA(0):
[ 3.275] (--) NVIDIA(0): DFP-1: disconnected
[ 3.275] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 3.275] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 3.275] (--) NVIDIA(0):
[ 3.285] (--) NVIDIA(0): DFP-2: connected
[ 3.285] (--) NVIDIA(0): DFP-2: Internal TMDS
[ 3.285] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
[ 3.285] (--) NVIDIA(0):
[ 3.285] (--) NVIDIA(0): DFP-3: disconnected
[ 3.285] (--) NVIDIA(0): DFP-3: Internal DisplayPort
[ 3.285] (--) NVIDIA(0): DFP-3: 480.0 MHz maximum pixel clock
[ 3.285] (--) NVIDIA(0):
[ 3.285] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 3.286] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 670MX (GK104) at PCI:1:0:0 (GPU-0)
[ 3.286] (--) NVIDIA(0): Memory: 3145728 kBytes
[ 3.286] (--) NVIDIA(0): VideoBIOS: 80.04.60.00.0e
[ 3.286] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 3.286] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 3.286] (**) NVIDIA(0): device BenQ G925HDA (CRT-0) (Using EDID frequencies has
[ 3.286] (**) NVIDIA(0): been enabled on all display devices.)
[ 3.288] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 3.288] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
[ 3.288] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 3.288] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 3.288] (**) NVIDIA(0): device DFP-2 (Using EDID frequencies has been enabled on
[ 3.288] (**) NVIDIA(0): all display devices.)
[ 3.289] (==) NVIDIA(0):
[ 3.289] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 3.289] (==) NVIDIA(0): will be used as the requested mode.
[ 3.289] (==) NVIDIA(0):
[ 3.290] (II) NVIDIA(0): Validated MetaModes:
[ 3.290] (II) NVIDIA(0):
[ 3.290] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,CRT-0:nvidia-auto-select,DFP-2:nvidia-auto-select"
[ 3.290] (II) NVIDIA(0): Virtual screen size determined to be 3926 x 1080
[ 3.295] (--) NVIDIA(0): DPI set to (128, 130); computed from "UseEdidDpi" X config
[ 3.295] (--) NVIDIA(0): option
[ 3.295] (--) Depth 24 pixmap format is 32 bpp
[ 3.296] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 3.296] (II) NVIDIA: access.
[ 3.299] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 3.299] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 3.299] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 3.299] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 3.299] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 3.299] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 3.299] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 3.299] (II) NVIDIA(0): Config Options in the README.
[ 3.330] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,CRT-0:nvidia-auto-select,DFP-2:nvidia-auto-select"
[ 4.709] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 4.709] (==) NVIDIA(0): Backing store enabled
[ 4.709] (==) NVIDIA(0): Silken mouse enabled
[ 4.710] (**) NVIDIA(0): DPMS enabled
[ 4.710] (II) Loading sub module "dri2"
[ 4.710] (II) LoadModule: "dri2"
[ 4.710] (II) Module "dri2" already built-in
[ 4.710] (II) NVIDIA(0): [DRI2] Setup complete
[ 4.710] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 4.711] (--) RandR disabled
[ 4.717] (II) Initializing extension GLX
[ 4.717] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 4.810] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4.810] (**) Power Button: Applying InputClass "system-keyboard"
[ 4.810] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 4.810] (II) LoadModule: "evdev"
[ 4.811] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4.812] (II) Module evdev: vendor="X.Org Foundation"
[ 4.812] compiled for 1.17.1, module version = 2.9.2
[ 4.812] Module class: X.Org XInput Driver
[ 4.812] ABI class: X.Org XInput driver, version 21.0
[ 4.812] (II) Using input driver 'evdev' for 'Power Button'
[ 4.812] (**) Power Button: always reports core events
[ 4.812] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 4.812] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4.812] (--) evdev: Power Button: Found keys
[ 4.812] (II) evdev: Power Button: Configuring as keyboard
[ 4.812] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event5"
[ 4.812] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4.812] (**) Option "xkb_rules" "evdev"
[ 4.812] (**) Option "xkb_model" "pc104"
[ 4.812] (**) Option "xkb_layout" "us"
[ 4.812] (**) Option "xkb_variant" "intl"
[ 4.812] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 4.844] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 4.844] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 4.844] (**) Video Bus: Applying InputClass "system-keyboard"
[ 4.844] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[ 4.844] (II) Using input driver 'evdev' for 'Video Bus'
[ 4.844] (**) Video Bus: always reports core events
[ 4.844] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 4.844] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 4.844] (--) evdev: Video Bus: Found keys
[ 4.844] (II) evdev: Video Bus: Configuring as keyboard
[ 4.844] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input18/event10"
[ 4.844] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 4.844] (**) Option "xkb_rules" "evdev"
[ 4.844] (**) Option "xkb_model" "pc104"
[ 4.844] (**) Option "xkb_layout" "us"
[ 4.844] (**) Option "xkb_variant" "intl"
[ 4.844] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 4.845] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 4.845] (II) No input driver specified, ignoring this device.
[ 4.845] (II) This device may have been added with another device file.
[ 4.845] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 4.845] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 4.845] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 4.845] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
[ 4.845] (II) Using input driver 'evdev' for 'Sleep Button'
[ 4.845] (**) Sleep Button: always reports core events
[ 4.845] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 4.845] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 4.845] (--) evdev: Sleep Button: Found keys
[ 4.845] (II) evdev: Sleep Button: Configuring as keyboard
[ 4.845] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8/event4"
[ 4.845] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 4.845] (**) Option "xkb_rules" "evdev"
[ 4.845] (**) Option "xkb_model" "pc104"
[ 4.845] (**) Option "xkb_layout" "us"
[ 4.846] (**) Option "xkb_variant" "intl"
[ 4.846] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 4.846] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[ 4.847] (II) No input driver specified, ignoring this device.
[ 4.847] (II) This device may have been added with another device file.
[ 4.847] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[ 4.847] (II) No input driver specified, ignoring this device.
[ 4.847] (II) This device may have been added with another device file.
[ 4.848] (II) config/udev: Adding input device Logitech Gaming Mouse G402 (/dev/input/event1)
[ 4.848] (**) Logitech Gaming Mouse G402: Applying InputClass "evdev pointer catchall"
[ 4.848] (II) Using input driver 'evdev' for 'Logitech Gaming Mouse G402'
[ 4.848] (**) Logitech Gaming Mouse G402: always reports core events
[ 4.848] (**) evdev: Logitech Gaming Mouse G402: Device: "/dev/input/event1"
[ 4.900] (--) evdev: Logitech Gaming Mouse G402: Vendor 0x46d Product 0xc07e
[ 4.900] (--) evdev: Logitech Gaming Mouse G402: Found 20 mouse buttons
[ 4.900] (--) evdev: Logitech Gaming Mouse G402: Found scroll wheel(s)
[ 4.900] (--) evdev: Logitech Gaming Mouse G402: Found relative axes
[ 4.900] (--) evdev: Logitech Gaming Mouse G402: Found x and y relative axes
[ 4.900] (II) evdev: Logitech Gaming Mouse G402: Configuring as mouse
[ 4.900] (II) evdev: Logitech Gaming Mouse G402: Adding scrollwheel support
[ 4.900] (**) evdev: Logitech Gaming Mouse G402: YAxisMapping: buttons 4 and 5
[ 4.900] (**) evdev: Logitech Gaming Mouse G402: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4.900] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:046D:C07E.0001/input/input5/event1"
[ 4.900] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G402" (type: MOUSE, id 9)
[ 4.900] (II) evdev: Logitech Gaming Mouse G402: initialized for relative axes.
[ 4.900] (**) Logitech Gaming Mouse G402: (accel) keeping acceleration scheme 1
[ 4.900] (**) Logitech Gaming Mouse G402: (accel) acceleration profile 0
[ 4.900] (**) Logitech Gaming Mouse G402: (accel) acceleration factor: 2.000
[ 4.900] (**) Logitech Gaming Mouse G402: (accel) acceleration threshold: 4
[ 4.902] (II) config/udev: Adding input device Logitech Gaming Mouse G402 (/dev/input/mouse0)
[ 4.902] (II) No input driver specified, ignoring this device.
[ 4.902] (II) This device may have been added with another device file.
[ 4.903] (II) config/udev: Adding input device Logitech Gaming Mouse G402 (/dev/input/event2)
[ 4.903] (**) Logitech Gaming Mouse G402: Applying InputClass "evdev keyboard catchall"
[ 4.903] (**) Logitech Gaming Mouse G402: Applying InputClass "system-keyboard"
[ 4.903] (**) Logitech Gaming Mouse G402: Applying InputClass "Keyboard Defaults"
[ 4.903] (II) Using input driver 'evdev' for 'Logitech Gaming Mouse G402'
[ 4.903] (**) Logitech Gaming Mouse G402: always reports core events
[ 4.903] (**) evdev: Logitech Gaming Mouse G402: Device: "/dev/input/event2"
[ 4.903] (--) evdev: Logitech Gaming Mouse G402: Vendor 0x46d Product 0xc07e
[ 4.903] (--) evdev: Logitech Gaming Mouse G402: Found 1 mouse buttons
[ 4.903] (--) evdev: Logitech Gaming Mouse G402: Found scroll wheel(s)
[ 4.903] (--) evdev: Logitech Gaming Mouse G402: Found relative axes
[ 4.903] (II) evdev: Logitech Gaming Mouse G402: Forcing relative x/y axes to exist.
[ 4.903] (--) evdev: Logitech Gaming Mouse G402: Found absolute axes
[ 4.903] (II) evdev: Logitech Gaming Mouse G402: Forcing absolute x/y axes to exist.
[ 4.903] (--) evdev: Logitech Gaming Mouse G402: Found keys
[ 4.903] (II) evdev: Logitech Gaming Mouse G402: Configuring as mouse
[ 4.903] (II) evdev: Logitech Gaming Mouse G402: Configuring as keyboard
[ 4.903] (II) evdev: Logitech Gaming Mouse G402: Adding scrollwheel support
[ 4.903] (**) evdev: Logitech Gaming Mouse G402: YAxisMapping: buttons 4 and 5
[ 4.903] (**) evdev: Logitech Gaming Mouse G402: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4.904] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:046D:C07E.0002/input/input6/event2"
[ 4.904] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G402" (type: KEYBOARD, id 10)
[ 4.904] (**) Option "xkb_rules" "evdev"
[ 4.904] (**) Option "xkb_model" "pc104"
[ 4.904] (**) Option "xkb_layout" "us"
[ 4.904] (**) Option "xkb_variant" "intl"
[ 4.904] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 4.904] (II) evdev: Logitech Gaming Mouse G402: initialized for relative axes.
[ 4.904] (WW) evdev: Logitech Gaming Mouse G402: ignoring absolute axes.
[ 4.904] (**) Logitech Gaming Mouse G402: (accel) keeping acceleration scheme 1
[ 4.904] (**) Logitech Gaming Mouse G402: (accel) acceleration profile 0
[ 4.904] (**) Logitech Gaming Mouse G402: (accel) acceleration factor: 2.000
[ 4.904] (**) Logitech Gaming Mouse G402: (accel) acceleration threshold: 4
[ 4.906] (II) config/udev: Adding input device ASUS USB2.0 Webcam (/dev/input/event9)
[ 4.906] (**) ASUS USB2.0 Webcam: Applying InputClass "evdev keyboard catchall"
[ 4.906] (**) ASUS USB2.0 Webcam: Applying InputClass "system-keyboard"
[ 4.906] (**) ASUS USB2.0 Webcam: Applying InputClass "Keyboard Defaults"
[ 4.906] (II) Using input driver 'evdev' for 'ASUS USB2.0 Webcam'
[ 4.906] (**) ASUS USB2.0 Webcam: always reports core events
[ 4.906] (**) evdev: ASUS USB2.0 Webcam: Device: "/dev/input/event9"
[ 4.906] (--) evdev: ASUS USB2.0 Webcam: Vendor 0x1bcf Product 0x2885
[ 4.906] (--) evdev: ASUS USB2.0 Webcam: Found keys
[ 4.906] (II) evdev: ASUS USB2.0 Webcam: Configuring as keyboard
[ 4.906] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input17/event9"
[ 4.906] (II) XINPUT: Adding extended input device "ASUS USB2.0 Webcam" (type: KEYBOARD, id 11)
[ 4.906] (**) Option "xkb_rules" "evdev"
[ 4.906] (**) Option "xkb_model" "pc104"
[ 4.906] (**) Option "xkb_layout" "us"
[ 4.906] (**) Option "xkb_variant" "intl"
[ 4.906] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 4.907] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[ 4.907] (II) No input driver specified, ignoring this device.
[ 4.907] (II) This device may have been added with another device file.
[ 4.908] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[ 4.908] (II) No input driver specified, ignoring this device.
[ 4.908] (II) This device may have been added with another device file.
[ 4.909] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event11)
[ 4.909] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 4.909] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
[ 4.909] (**) Asus WMI hotkeys: Applying InputClass "Keyboard Defaults"
[ 4.909] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 4.909] (**) Asus WMI hotkeys: always reports core events
[ 4.909] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event11"
[ 4.909] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 4.909] (--) evdev: Asus WMI hotkeys: Found keys
[ 4.909] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 4.909] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input19/event11"
[ 4.909] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[ 4.909] (**) Option "xkb_rules" "evdev"
[ 4.909] (**) Option "xkb_model" "pc104"
[ 4.909] (**) Option "xkb_layout" "us"
[ 4.909] (**) Option "xkb_variant" "intl"
[ 4.909] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 4.910] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 4.910] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 4.910] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 4.910] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 4.910] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 4.910] (**) AT Translated Set 2 keyboard: always reports core events
[ 4.910] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 4.910] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 4.910] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 4.910] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 4.910] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 4.910] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 4.910] (**) Option "xkb_rules" "evdev"
[ 4.911] (**) Option "xkb_model" "pc104"
[ 4.911] (**) Option "xkb_layout" "us"
[ 4.911] (**) Option "xkb_variant" "intl"
[ 4.911] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 4.912] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[ 4.912] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 4.912] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 4.912] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 4.912] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 4.912] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 4.912] (II) LoadModule: "synaptics"
[ 4.912] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4.914] (II) Module synaptics: vendor="X.Org Foundation"
[ 4.914] compiled for 1.17.1, module version = 1.8.2
[ 4.914] Module class: X.Org XInput Driver
[ 4.914] ABI class: X.Org XInput driver, version 21.0
[ 4.914] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 4.914] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 4.914] (**) Option "Device" "/dev/input/event14"
[ 4.973] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1282 - 5660 (res 42)
[ 4.973] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1106 - 4746 (res 66)
[ 4.973] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 4.973] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 4.973] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 4.973] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 4.973] (**) Option "TapButton1" "1"
[ 4.973] (**) Option "TapButton2" "2"
[ 4.973] (**) Option "TapButton3" "3"
[ 4.973] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 4.973] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 5.000] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input14/event14"
[ 5.000] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 5.000] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 5.000] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 5.000] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[ 5.000] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 5.000] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 5.000] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 5.000] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 5.000] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 5.001] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 5.001] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 5.002] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 5.002] (II) No input driver specified, ignoring this device.
[ 5.002] (II) This device may have been added with another device file.
[ 5.008] (II) config/udev: removing device Asus WMI hotkeys
[ 5.026] (II) evdev: Asus WMI hotkeys: Close
[ 5.026] (II) UnloadModule: "evdev"
[ 5.027] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event11)
[ 5.027] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 5.027] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
[ 5.027] (**) Asus WMI hotkeys: Applying InputClass "Keyboard Defaults"
[ 5.027] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 5.027] (**) Asus WMI hotkeys: always reports core events
[ 5.027] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event11"
[ 5.027] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 5.027] (--) evdev: Asus WMI hotkeys: Found keys
[ 5.027] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 5.027] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input19/event11"
[ 5.027] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[ 5.027] (**) Option "xkb_rules" "evdev"
[ 5.027] (**) Option "xkb_model" "pc104"
[ 5.027] (**) Option "xkb_layout" "us"
[ 5.027] (**) Option "xkb_variant" "intl"
[ 5.027] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5.038] (--) NVIDIA(GPU-0): DFP-2: connected
[ 5.038] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 5.038] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 5.038] (--) NVIDIA(GPU-0):
[ 5.048] (--) NVIDIA(GPU-0): DFP-2: connected
[ 5.048] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 5.048] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 5.048] (--) NVIDIA(GPU-0):
[ 5.049] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[ 5.049] (II) No input driver specified, ignoring this device.
[ 5.049] (II) This device may have been added with another device file.
[ 5.049] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[ 5.049] (II) No input driver specified, ignoring this device.
[ 5.049] (II) This device may have been added with another device file.
[ 5.050] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 5.050] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 5.050] (II) config/udev: removing device SynPS/2 Synaptics TouchPad
[ 5.093] (II) UnloadModule: "synaptics"
[ 5.093] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[ 5.093] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 5.093] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 5.093] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 5.094] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 5.094] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 5.094] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 5.094] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 5.094] (**) Option "Device" "/dev/input/event14"
[ 5.183] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1282 - 5660 (res 42)
[ 5.183] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1106 - 4746 (res 66)
[ 5.183] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 5.183] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 5.183] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 5.183] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 5.183] (**) Option "TapButton1" "1"
[ 5.183] (**) Option "TapButton2" "2"
[ 5.183] (**) Option "TapButton3" "3"
[ 5.183] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 5.183] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 5.223] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input14/event14"
[ 5.223] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 5.223] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 5.223] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 5.223] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[ 5.223] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 5.223] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 5.223] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 5.223] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 5.223] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 10.871] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): connected
[ 10.871] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): 400.0 MHz maximum pixel clock
[ 10.871] (--) NVIDIA(GPU-0):
[ 10.871] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): connected
[ 10.871] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): Internal LVDS
[ 10.871] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): 330.0 MHz maximum pixel clock
[ 10.871] (--) NVIDIA(GPU-0):
[ 10.871] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 10.871] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 10.871] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 10.871] (--) NVIDIA(GPU-0):
[ 10.881] (--) NVIDIA(GPU-0): DFP-2: connected
[ 10.881] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 10.881] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 10.881] (--) NVIDIA(GPU-0):
[ 10.881] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 10.881] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[ 10.881] (--) NVIDIA(GPU-0): DFP-3: 480.0 MHz maximum pixel clock
[ 10.881] (--) NVIDIA(GPU-0):
[ 10.959] (II) NVIDIA(0): Setting mode "LVDS-0: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, VGA-0: nvidia-auto-select @1366x768 +1920+0 {ViewPortIn=1366x768, ViewPortOut=1366x768+0+0}"
[ 11.120] (II) NVIDIA(0): Setting mode "VGA-0: nvidia-auto-select @1366x768 +0+0 {ViewPortIn=1366x768, ViewPortOut=1366x768+0+0}"
[ 11.948] (II) NVIDIA(0): Setting mode "VGA-0: nvidia-auto-select @1366x768 +0+0 {ViewPortIn=1366x768, ViewPortOut=1366x768+0+0}, LVDS-0: nvidia-auto-select @1920x1080 +1366+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 13.651] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): connected
[ 13.651] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): 400.0 MHz maximum pixel clock
[ 13.651] (--) NVIDIA(GPU-0):
[ 13.651] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): connected
[ 13.651] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): Internal LVDS
[ 13.651] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): 330.0 MHz maximum pixel clock
[ 13.651] (--) NVIDIA(GPU-0):
[ 13.652] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 13.652] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 13.652] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 13.652] (--) NVIDIA(GPU-0):
[ 13.662] (--) NVIDIA(GPU-0): DFP-2: connected
[ 13.662] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 13.662] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 13.662] (--) NVIDIA(GPU-0):
[ 13.662] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 13.662] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[ 13.662] (--) NVIDIA(GPU-0): DFP-3: 480.0 MHz maximum pixel clock
[ 13.662] (--) NVIDIA(GPU-0):
[ 14.062] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): connected
[ 14.062] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): 400.0 MHz maximum pixel clock
[ 14.062] (--) NVIDIA(GPU-0):
[ 14.062] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): connected
[ 14.062] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): Internal LVDS
[ 14.062] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): 330.0 MHz maximum pixel clock
[ 14.062] (--) NVIDIA(GPU-0):
[ 14.062] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 14.062] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 14.062] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 14.062] (--) NVIDIA(GPU-0):
[ 14.072] (--) NVIDIA(GPU-0): DFP-2: connected
[ 14.072] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 14.072] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 14.072] (--) NVIDIA(GPU-0):
[ 14.072] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 14.072] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[ 14.072] (--) NVIDIA(GPU-0): DFP-3: 480.0 MHz maximum pixel clock
[ 14.072] (--) NVIDIA(GPU-0):
[ 14.084] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): connected
[ 14.084] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): 400.0 MHz maximum pixel clock
[ 14.084] (--) NVIDIA(GPU-0):
[ 14.084] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): connected
[ 14.084] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): Internal LVDS
[ 14.084] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): 330.0 MHz maximum pixel clock
[ 14.084] (--) NVIDIA(GPU-0):
[ 14.084] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 14.084] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 14.084] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 14.084] (--) NVIDIA(GPU-0):
[ 14.094] (--) NVIDIA(GPU-0): DFP-2: connected
[ 14.094] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 14.094] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 14.094] (--) NVIDIA(GPU-0):
[ 14.094] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 14.094] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[ 14.094] (--) NVIDIA(GPU-0): DFP-3: 480.0 MHz maximum pixel clock
[ 14.094] (--) NVIDIA(GPU-0):
[ 14.149] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): connected
[ 14.149] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): 400.0 MHz maximum pixel clock
[ 14.149] (--) NVIDIA(GPU-0):
[ 14.149] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): connected
[ 14.149] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): Internal LVDS
[ 14.149] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): 330.0 MHz maximum pixel clock
[ 14.149] (--) NVIDIA(GPU-0):
[ 14.149] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 14.149] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 14.149] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 14.149] (--) NVIDIA(GPU-0):
[ 14.159] (--) NVIDIA(GPU-0): DFP-2: connected
[ 14.159] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 14.159] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 14.159] (--) NVIDIA(GPU-0):
[ 14.160] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 14.160] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[ 14.160] (--) NVIDIA(GPU-0): DFP-3: 480.0 MHz maximum pixel clock
[ 14.160] (--) NVIDIA(GPU-0):
[ 14.171] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): connected
[ 14.171] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): 400.0 MHz maximum pixel clock
[ 14.171] (--) NVIDIA(GPU-0):
[ 14.171] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): connected
[ 14.171] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): Internal LVDS
[ 14.171] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): 330.0 MHz maximum pixel clock
[ 14.171] (--) NVIDIA(GPU-0):
[ 14.172] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 14.172] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 14.172] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 14.172] (--) NVIDIA(GPU-0):
[ 14.182] (--) NVIDIA(GPU-0): DFP-2: connected
[ 14.182] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 14.182] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 14.182] (--) NVIDIA(GPU-0):
[ 14.182] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 14.182] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[ 14.182] (--) NVIDIA(GPU-0): DFP-3: 480.0 MHz maximum pixel clock
[ 14.182] (--) NVIDIA(GPU-0):
[ 14.308] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): connected
[ 14.308] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): 400.0 MHz maximum pixel clock
[ 14.308] (--) NVIDIA(GPU-0):
[ 14.308] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): connected
[ 14.308] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): Internal LVDS
[ 14.308] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): 330.0 MHz maximum pixel clock
[ 14.308] (--) NVIDIA(GPU-0):
[ 14.309] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 14.309] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 14.309] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 14.309] (--) NVIDIA(GPU-0):
[ 14.319] (--) NVIDIA(GPU-0): DFP-2: connected
[ 14.319] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 14.319] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 14.319] (--) NVIDIA(GPU-0):
[ 14.319] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 14.319] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[ 14.319] (--) NVIDIA(GPU-0): DFP-3: 480.0 MHz maximum pixel clock
[ 14.319] (--) NVIDIA(GPU-0):
[ 14.330] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): connected
[ 14.330] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): 400.0 MHz maximum pixel clock
[ 14.330] (--) NVIDIA(GPU-0):
[ 14.330] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): connected
[ 14.330] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): Internal LVDS
[ 14.330] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): 330.0 MHz maximum pixel clock
[ 14.330] (--) NVIDIA(GPU-0):
[ 14.330] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 14.330] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 14.330] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 14.330] (--) NVIDIA(GPU-0):
[ 14.340] (--) NVIDIA(GPU-0): DFP-2: connected
[ 14.340] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 14.340] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 14.340] (--) NVIDIA(GPU-0):
[ 14.340] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 14.340] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[ 14.340] (--) NVIDIA(GPU-0): DFP-3: 480.0 MHz maximum pixel clock
[ 14.340] (--) NVIDIA(GPU-0):
[ 14.379] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): connected
[ 14.380] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): 400.0 MHz maximum pixel clock
[ 14.380] (--) NVIDIA(GPU-0):
[ 14.380] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): connected
[ 14.380] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): Internal LVDS
[ 14.380] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): 330.0 MHz maximum pixel clock
[ 14.380] (--) NVIDIA(GPU-0):
[ 14.380] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 14.380] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 14.380] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 14.380] (--) NVIDIA(GPU-0):
[ 14.390] (--) NVIDIA(GPU-0): DFP-2: connected
[ 14.390] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 14.390] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 14.390] (--) NVIDIA(GPU-0):
[ 14.391] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 14.391] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[ 14.391] (--) NVIDIA(GPU-0): DFP-3: 480.0 MHz maximum pixel clock
[ 14.391] (--) NVIDIA(GPU-0):
[ 14.402] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): connected
[ 14.402] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): 400.0 MHz maximum pixel clock
[ 14.402] (--) NVIDIA(GPU-0):
[ 14.402] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): connected
[ 14.402] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): Internal LVDS
[ 14.403] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): 330.0 MHz maximum pixel clock
[ 14.403] (--) NVIDIA(GPU-0):
[ 14.403] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 14.403] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 14.403] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 14.403] (--) NVIDIA(GPU-0):
[ 14.413] (--) NVIDIA(GPU-0): DFP-2: connected
[ 14.413] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 14.413] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 14.413] (--) NVIDIA(GPU-0):
[ 14.413] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 14.413] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[ 14.413] (--) NVIDIA(GPU-0): DFP-3: 480.0 MHz maximum pixel clock
[ 14.413] (--) NVIDIA(GPU-0):
[ 14.460] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): connected
[ 14.460] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): 400.0 MHz maximum pixel clock
[ 14.460] (--) NVIDIA(GPU-0):
[ 14.461] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): connected
[ 14.461] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): Internal LVDS
[ 14.461] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): 330.0 MHz maximum pixel clock
[ 14.461] (--) NVIDIA(GPU-0):
[ 14.461] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 14.461] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 14.461] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 14.461] (--) NVIDIA(GPU-0):
[ 14.471] (--) NVIDIA(GPU-0): DFP-2: connected
[ 14.471] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 14.471] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 14.471] (--) NVIDIA(GPU-0):
[ 14.471] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 14.471] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[ 14.471] (--) NVIDIA(GPU-0): DFP-3: 480.0 MHz maximum pixel clock
[ 14.471] (--) NVIDIA(GPU-0):
[ 14.493] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): connected
[ 14.493] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): 400.0 MHz maximum pixel clock
[ 14.493] (--) NVIDIA(GPU-0):
[ 14.493] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): connected
[ 14.493] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): Internal LVDS
[ 14.493] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): 330.0 MHz maximum pixel clock
[ 14.493] (--) NVIDIA(GPU-0):
[ 14.493] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 14.493] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 14.493] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 14.494] (--) NVIDIA(GPU-0):
[ 14.504] (--) NVIDIA(GPU-0): DFP-2: connected
[ 14.504] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 14.504] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 14.504] (--) NVIDIA(GPU-0):
[ 14.504] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 14.504] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[ 14.504] (--) NVIDIA(GPU-0): DFP-3: 480.0 MHz maximum pixel clock
[ 14.504] (--) NVIDIA(GPU-0):
[ 14.550] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): connected
[ 14.550] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): 400.0 MHz maximum pixel clock
[ 14.550] (--) NVIDIA(GPU-0):
[ 14.550] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): connected
[ 14.550] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): Internal LVDS
[ 14.550] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): 330.0 MHz maximum pixel clock
[ 14.550] (--) NVIDIA(GPU-0):
[ 14.550] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 14.550] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 14.550] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 14.550] (--) NVIDIA(GPU-0):
[ 14.560] (--) NVIDIA(GPU-0): DFP-2: connected
[ 14.560] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 14.560] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 14.560] (--) NVIDIA(GPU-0):
[ 14.560] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 14.560] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[ 14.560] (--) NVIDIA(GPU-0): DFP-3: 480.0 MHz maximum pixel clock
[ 14.560] (--) NVIDIA(GPU-0):
[ 14.571] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): connected
[ 14.571] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): 400.0 MHz maximum pixel clock
[ 14.571] (--) NVIDIA(GPU-0):
[ 14.572] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): connected
[ 14.572] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): Internal LVDS
[ 14.572] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): 330.0 MHz maximum pixel clock
[ 14.572] (--) NVIDIA(GPU-0):
[ 14.572] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 14.572] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 14.572] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 14.572] (--) NVIDIA(GPU-0):
[ 14.582] (--) NVIDIA(GPU-0): DFP-2: connected
[ 14.583] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 14.583] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 14.583] (--) NVIDIA(GPU-0):
[ 14.583] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 14.583] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[ 14.583] (--) NVIDIA(GPU-0): DFP-3: 480.0 MHz maximum pixel clock
[ 14.583] (--) NVIDIA(GPU-0): Offline
There are 3 files in xorg.conf.d as shown below.
00-keyboard.conf:
# Read and parsed by systemd-localed. It's probably wise not to edit this file
# manually too freely.
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "us"
Option "XkbVariant" "intl"
EndSection50-synaptics.conf:
# Example xorg.conf.d snippet that assigns the touchpad driver
# to all touchpads. See xorg.conf.d(5) for more information on
# InputClass.
# DO NOT EDIT THIS FILE, your distribution will likely overwrite
# it when updating. Copy (and rename) this file into
# /etc/X11/xorg.conf.d first.
# Additional options may be added in the form of
# Option "OptionName" "value"
#
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
# This option is recommend on all Linux systems using evdev, but cannot be
# enabled by default. See the following link for details:
# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
MatchDevicePath "/dev/input/event*"
EndSection
Section "InputClass"
Identifier "touchpad ignore duplicates"
MatchIsTouchpad "on"
MatchOS "Linux"
MatchDevicePath "/dev/input/mouse*"
Option "Ignore" "on"
EndSection
# This option enables the bottom right corner to be a right button on
# non-synaptics clickpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Default clickpad buttons"
MatchDriver "synaptics"
Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
EndSection
# This option disables software buttons on Apple touchpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Disable clickpad buttons on Apple touchpads"
MatchProduct "Apple|bcm5974"
MatchDriver "synaptics"
Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSectionFinally, 99-killX.conf:
Section "ServerFlags"
Option "DontZap" "false"
EndSection
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSectionOffline
Thank you for the config and log files. I should have also asked for /etc/X11/xorg.conf.
[ 10.959] (II) NVIDIA(0): Setting mode "LVDS-0: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, VGA-0: nvidia-auto-select @1366x768 +1920+0 {ViewPortIn=1366x768, ViewPortOut=1366x768+0+0}"
[ 11.120] (II) NVIDIA(0): Setting mode "VGA-0: nvidia-auto-select @1366x768 +0+0 {ViewPortIn=1366x768, ViewPortOut=1366x768+0+0}"
[ 11.948] (II) NVIDIA(0): Setting mode "VGA-0: nvidia-auto-select @1366x768 +0+0 {ViewPortIn=1366x768, ViewPortOut=1366x768+0+0}, LVDS-0: nvidia-auto-select @1920x1080 +1366+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"Seems to indicate 1920x1080 (16:9) + 1366x768 (16:9 approx) which unfortunately does not match what your displays are reporting.
Hopefully someone else might be able to offer more help
Offline
xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 355.11 (buildmeister@swio-display-x86-rhel47-07) Wed Aug 26 17:15:49 PDT 2015
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSectionOffline
Does removing that xorg.conf and running X with just the other configuration files improve the situation?
If there is no improvement have you tried altering the xorg.conf based on the examples in the wiki at NVIDIA?
Offline
The NVIDIA package includes the nvidia-settings program that allows adjustment of several additional settings
Including monitors placement. I've always used this tool. It works alright.
Offline
Removing xorg.conf gets things a little better.
No change for the VGA screen, nvidia-settings "outputs" 1366*768 but the screen says it's only receiving 1280*768 so that's still a little blurry, and for the HDMI resolution now tops at 1024*768 instead of 480p, image fills the 1366*768 panel, surprisingly the panel says its receiving a full 1366*768 image.
Now I'll trying stuff from the NVIDIA wiki hoping for xrandr to do something.
And yes, I have to use nvidia-settings, the standard display manager sometimes does not work right.
Last edited by oscarbrito (2015-11-08 20:01:35)
Offline
No success on xrandr.
How about an older nvidia driver? And why do I get a boot loop when I try those?
Offline
No success on xrandr.
What commands did you try. What config file changes if any were there? What logs did these failures generate?
How about an older nvidia driver? And why do I get a boot loop when I try those?
Again you do not provide any specifics about the other nvidia drivers you tried.
Which driver packages did you try? How far did the boot proceed? What was the journal log of the failed boot.
Offline
Sorry about that.
Tried:
xrandr --output HDMI-0 --right-of LVDS-0 --mode 1366x768 And it returned:
xrandr: cannot find mode 1366x768 It does exactly what I can do with nvidia-settings.
Drivers tried "nvidia-340xx" and "nvidia-304xx". The as far as I could boot was to the nvidia splashscreen, sometimes even less. The screen just switched between on and all black and off. I did not recover any logs. I tried even chrooting and returning to the "nvidia" one (355.11-4).
Offline
Sorry about that.
Tried:xrandr --output HDMI-0 --right-of LVDS-0 --mode 1366x768And it returned:
xrandr: cannot find mode 1366x768
As the Xrandr wiki page suggested, did you run xrandr without any options to check the available outputs and modes?
It does exactly what I can do with nvidia-settings.
Manually alter your xorg.conf then to force the correct resolutions if nvidia-setting is incapable of doing it?
See link in post #12
Edit:
The title of the thread may also be putting others off reading it
It seems more an xorg.conf issue to me than drivers messing anything up.
Both displays are not being detected correctly but theres no evidence that I see showing that its the drivers to blame instead of the card or the displays.
Last edited by loqs (2015-11-11 17:21:36)
Offline
Yes I did the xrandr alone and I got the same output/modes from nvidia-settings.
Here's and updated version of my xorg.conf and I don'y have to be a genius to know It looks messed up.
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 355.11 (buildmeister@swio-display-x86-rhel47-07) Wed Aug 26 17:14:39 PDT 2015
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 355.11 (buildmeister@swio-display-x86-rhel47-07) Wed Aug 26 17:15:49 PDT 2015
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "AU Optronics Corporation"
HorizSync 66.8 - 66.8
VertRefresh 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 670MX"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-0"
Option "metamodes" "LVDS-0: nvidia-auto-select +1366+0, VGA-0: nvidia-auto-select +0+156, HDMI-0: nvidia-auto-select +3286+300; LVDS-0: nvidia-auto-select +0+0, HDMI-0: nvidia-auto-select +1920+0; LVDS-0: nvidia-auto-select +0+0 {viewportin=1680x1050, viewportout=1728x1080+96+0}, HDMI-0: nvidia-auto-select +1680+0; LVDS-0: nvidia-auto-select +0+0 {viewportin=1440x900, viewportout=1728x1080+96+0}, HDMI-0: nvidia-auto-select +1440+0; LVDS-0: nvidia-auto-select +0+0 {viewportin=1366x768, viewportout=1920x1079+0+0}, HDMI-0: nvidia-auto-select +1366+0; LVDS-0: nvidia-auto-select +0+0 {viewportin=1280x1024, viewportout=1350x1080+285+0}, HDMI-0: nvidia-auto-select +1280+0; LVDS-0: nvidia-auto-select +0+0 {viewportin=1280x800, viewportout=1728x1080+96+0}, HDMI-0: nvidia-auto-select +1280+0; LVDS-0: nvidia-auto-select +0+0 {viewportin=1280x720}, HDMI-0: nvidia-auto-select +1280+0"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSectionThe only screen section to appear healthy is the AU Optronics Corporation one which is the built-in.
You are right thinking it might not be the driver but I don't have any ideas, prior to this I never had issues like this before. Maybe if I roll back to 340 or 304 hoping for something to change.
Offline
Adding_undetected_resolutions
The above should allow you to force the correct resolutions using xrandr then you can add the determined values to xorg.conf
Offline
I saw that but since it would only do a workaround for the resolution, not fixing the issue from its roots. I use the HDMI audio output as well and xrandr would not do anything for it. I switched from "nvidia" package to the "nvidia-340xx" and did a "nvidia-xconfig". Now I'm having the bootloop. It starts, systemd works fine > screen turns off > then it turns on again on the nvidia splashscreen > Then a black screen of a second > screen switches off and... loop, the screen turns off again on the splash and so on. Where can I get a log?
Last edited by oscarbrito (2015-11-12 19:40:01)
Offline
I saw that but since it would only do a workaround for the resolution, not fixing the issue from its roots. I use the HDMI audio output as well and xrandr would not do anything for it.
Did you not read the section below Adding_undetected_resolutions Permanently_adding_undetected_resolutions
How is using HDMI audio output related to xrandr?
I switched from "nvidia" package to the "nvidia-340xx" and did a "nvidia-xconfig". Now I'm having the bootloop. It starts, systemd works fine > screen turns off > then it turns on again on the nvidia splashscreen > Then a black screen of a second > screen switches off and... loop, the screen turns off again on the splash and so on. Where can I get a log?
The relevant logs should be xorg.log same location as before and Journal
Edit: added quotes
Last edited by loqs (2015-11-12 20:20:40)
Offline
Heres the xorg.log:
[ 10.300]
X.Org X Server 1.17.4
Release Date: 2015-10-28
[ 10.300] X Protocol Version 11, Revision 0
[ 10.300] Build Operating System: Linux 4.2.5-1-ARCH x86_64
[ 10.300] Current Operating System: Linux M416 4.2.5-1-ARCH #1 SMP PREEMPT Tue Oct 27 08:13:28 CET 2015 x86_64
[ 10.300] Kernel command line: initrd=\initramfs-linux.img root=UUID=fa376a7b-54e7-4b4d-88a3-1d17237ab40e rw quiet
[ 10.300] Build Date: 01 November 2015 10:36:50AM
[ 10.300]
[ 10.300] Current version of pixman: 0.32.8
[ 10.300] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 10.300] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10.300] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 12 15:04:17 2015
[ 10.301] (==) Using config file: "/etc/X11/xorg.conf"
[ 10.301] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 10.301] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 10.301] (==) ServerLayout "Layout0"
[ 10.301] (**) |-->Screen "Screen0" (0)
[ 10.301] (**) | |-->Monitor "Monitor0"
[ 10.301] (**) | |-->Device "Device0"
[ 10.301] (**) |-->Input Device "Keyboard0"
[ 10.301] (**) |-->Input Device "Mouse0"
[ 10.301] (**) Option "DontZap" "false"
[ 10.301] (**) Option "Xinerama" "0"
[ 10.301] (==) Automatically adding devices
[ 10.301] (==) Automatically enabling devices
[ 10.301] (==) Automatically adding GPU devices
[ 10.301] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 10.301] Entry deleted from font path.
[ 10.301] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 10.301] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 10.301] Entry deleted from font path.
[ 10.301] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 10.301] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 10.301] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10.301] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 10.302] (WW) Disabling Keyboard0
[ 10.302] (WW) Disabling Mouse0
[ 10.302] (II) Loader magic: 0x817d60
[ 10.302] (II) Module ABI versions:
[ 10.302] X.Org ANSI C Emulation: 0.4
[ 10.302] X.Org Video Driver: 19.0
[ 10.302] X.Org XInput driver : 21.1
[ 10.302] X.Org Server Extension : 9.0
[ 10.303] (EE) systemd-logind: failed to get session: PID 539 does not belong to any known session
[ 10.304] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 10.306] (--) PCI:*(0:1:0:0) 10de:11a1:1043:10ad rev 161, Mem @ 0xf4000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 10.306] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 10.306] (II) LoadModule: "glx"
[ 10.306] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 10.306] (EE) Failed to load /usr/lib/xorg/modules/extensions/libglx.so: /usr/lib/xorg/modules/extensions/libglx.so: cannot open shared object file: No such file or directory
[ 10.306] (II) UnloadModule: "glx"
[ 10.306] (II) Unloading glx
[ 10.306] (EE) Failed to load module "glx" (loader failed, 7)
[ 10.306] (II) LoadModule: "nvidia"
[ 10.306] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 10.307] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 10.307] compiled for 4.0.2, module version = 1.0.0
[ 10.307] Module class: X.Org Video Driver
[ 10.307] (II) NVIDIA dlloader X Driver 340.93 Wed Aug 19 16:01:53 PDT 2015
[ 10.307] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 10.307] (++) using VT number 7
[ 10.307] (II) Loading sub module "fb"
[ 10.307] (II) LoadModule: "fb"
[ 10.307] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10.307] (II) Module fb: vendor="X.Org Foundation"
[ 10.307] compiled for 1.17.4, module version = 1.0.0
[ 10.307] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.307] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 10.307] (II) Loading sub module "wfb"
[ 10.307] (II) LoadModule: "wfb"
[ 10.308] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 10.308] (II) Module wfb: vendor="X.Org Foundation"
[ 10.308] compiled for 1.17.4, module version = 1.0.0
[ 10.308] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.308] (II) Loading sub module "ramdac"
[ 10.308] (II) LoadModule: "ramdac"
[ 10.308] (II) Module "ramdac" already built-in
[ 10.308] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 10.308] (==) NVIDIA(0): RGB weight 888
[ 10.308] (==) NVIDIA(0): Default visual is TrueColor
[ 10.308] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 10.308] (**) NVIDIA(0): Option "Stereo" "0"
[ 10.308] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
[ 10.308] (**) NVIDIA(0): Option "SLI" "Off"
[ 10.308] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 10.308] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 10.308] (**) NVIDIA(0): Stereo disabled by request
[ 10.309] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 10.309] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 10.309] (**) NVIDIA(0): Option "MetaModes" "LVDS-0: nvidia-auto-select +1366+0, VGA-0: nvidia-auto-select +0+156, HDMI-0: nvidia-auto-select +3286+300; LVDS-0: nvidia-auto-select +0+0, HDMI-0: nvidia-auto-select +1920+0; LVDS-0: nvidia-auto-select +0+0 {viewportin=1680x1050, viewportout=1728x1080+96+0}, HDMI-0: nvidia-auto-select +1680+0; LVDS-0: nvidia-auto-select +0+0 {viewportin=1440x900, viewportout=1728x1080+96+0}, HDMI-0: nvidia-auto-select +1440+0; LVDS-0: nvidia-auto-select +0+0 {viewportin=1366x768, viewportout=1920x1079+0+0}, HDMI-0: nvidia-auto-select +1366+0; LVDS-0: nvidia-auto-select +0+0 {viewportin=1280x1024, viewportout=1350x1080+285+0}, HDMI-0: nvidia-auto-select +1280+0; LVDS-0: nvidia-auto-select +0+0 {viewportin=1280x800, viewportout=1728x1080+96+0}, HDMI-0: nvidia-auto-select +1280+0; LVDS-0: nvidia-auto-select +0+0 {viewportin=1280x720}, HDMI-0: nvidia-auto-select +1280+0"
[ 10.309] (**) NVIDIA(0): Enabling 2D acceleration
[ 10.309] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[ 10.309] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
[ 10.309] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
[ 10.309] (EE) NVIDIA(0): you continue to encounter problems, Please try
[ 10.309] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
[ 10.583] (II) NVIDIA(0): Display (BenQ G925HDA (CRT-0)) does not support NVIDIA 3D
[ 10.584] (II) NVIDIA(0): Vision stereo.
[ 10.584] (II) NVIDIA(0): Display (AU Optronics Corporation (DFP-0)) does not support
[ 10.584] (II) NVIDIA(0): NVIDIA 3D Vision stereo.
[ 10.594] (II) NVIDIA(0): Display (Samsung (DFP-2)) does not support NVIDIA 3D Vision
[ 10.594] (II) NVIDIA(0): stereo.
[ 10.594] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 10.595] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 670MX (GK104) at PCI:1:0:0 (GPU-0)
[ 10.595] (--) NVIDIA(0): Memory: 3145728 kBytes
[ 10.595] (--) NVIDIA(0): VideoBIOS: 80.04.60.00.0e
[ 10.595] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 10.598] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 670MX at PCI:1:0:0
[ 10.599] (--) NVIDIA(0): BenQ G925HDA (CRT-0) (connected)
[ 10.599] (--) NVIDIA(0): AU Optronics Corporation (DFP-0) (boot, connected)
[ 10.599] (--) NVIDIA(0): DFP-1
[ 10.599] (--) NVIDIA(0): Samsung (DFP-2) (connected)
[ 10.599] (--) NVIDIA(0): DFP-3
[ 10.599] (--) NVIDIA(GPU-0): BenQ G925HDA (CRT-0): 400.0 MHz maximum pixel clock
[ 10.599] (--) NVIDIA(0): AU Optronics Corporation (DFP-0): Internal LVDS
[ 10.599] (--) NVIDIA(GPU-0): AU Optronics Corporation (DFP-0): 330.0 MHz maximum pixel clock
[ 10.599] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 10.599] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 10.599] (--) NVIDIA(0): Samsung (DFP-2): Internal TMDS
[ 10.599] (--) NVIDIA(GPU-0): Samsung (DFP-2): 340.0 MHz maximum pixel clock
[ 10.599] (--) NVIDIA(0): DFP-3: Internal DisplayPort
[ 10.599] (--) NVIDIA(GPU-0): DFP-3: 480.0 MHz maximum pixel clock
[ 10.599] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 10.599] (**) NVIDIA(0): device BenQ G925HDA (CRT-0) (Using EDID frequencies has
[ 10.599] (**) NVIDIA(0): been enabled on all display devices.)
[ 10.600] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 10.600] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
[ 10.600] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 10.600] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 10.600] (**) NVIDIA(0): device Samsung (DFP-2) (Using EDID frequencies has been
[ 10.600] (**) NVIDIA(0): enabled on all display devices.)
[ 10.606] (II) NVIDIA(0): Validated MetaModes:
[ 10.606] (II) NVIDIA(0):
[ 10.606] (II) NVIDIA(0): "LVDS-0:nvidia-auto-select+1366+0,VGA-0:nvidia-auto-select+0+156,HDMI-0:nvidia-auto-select+3286+300"
[ 10.606] (II) NVIDIA(0):
[ 10.606] (II) NVIDIA(0): "LVDS-0:nvidia-auto-select+0+0,HDMI-0:nvidia-auto-select+1920+0"
[ 10.606] (II) NVIDIA(0):
[ 10.606] (II) NVIDIA(0): "LVDS-0:nvidia-auto-select+0+0{viewportin=1680x1050,viewportout=1728x1080+96+0},HDMI-0:nvidia-auto-select+1680+0"
[ 10.606] (II) NVIDIA(0):
[ 10.606] (II) NVIDIA(0): "LVDS-0:nvidia-auto-select+0+0{viewportin=1440x900,viewportout=1728x1080+96+0},HDMI-0:nvidia-auto-select+1440+0"
[ 10.606] (II) NVIDIA(0):
[ 10.606] (II) NVIDIA(0): "LVDS-0:nvidia-auto-select+0+0{viewportin=1366x768,viewportout=1920x1079+0+0},HDMI-0:nvidia-auto-select+1366+0"
[ 10.606] (II) NVIDIA(0):
[ 10.606] (II) NVIDIA(0): "LVDS-0:nvidia-auto-select+0+0{viewportin=1280x1024,viewportout=1350x1080+285+0},HDMI-0:nvidia-auto-select+1280+0"
[ 10.606] (II) NVIDIA(0):
[ 10.606] (II) NVIDIA(0): "LVDS-0:nvidia-auto-select+0+0{viewportin=1280x800,viewportout=1728x1080+96+0},HDMI-0:nvidia-auto-select+1280+0"
[ 10.606] (II) NVIDIA(0):
[ 10.606] (II) NVIDIA(0): "LVDS-0:nvidia-auto-select+0+0{viewportin=1280x720},HDMI-0:nvidia-auto-select+1280+0"
[ 10.607] (II) NVIDIA(0): Virtual screen size determined to be 4652 x 1080
[ 11.402] (--) NVIDIA(0): DPI set to (84, 84); computed from "UseEdidDpi" X config
[ 11.402] (--) NVIDIA(0): option
[ 11.402] (--) Depth 24 pixmap format is 32 bpp
[ 11.402] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 11.402] (II) NVIDIA: access.
[ 11.404] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 11.404] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 11.405] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 11.405] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 11.405] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 11.405] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 11.405] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 11.405] (II) NVIDIA(0): Config Options in the README.
[ 11.408] (II) NVIDIA(0): Setting mode "LVDS-0:nvidia-auto-select+1366+0,VGA-0:nvidia-auto-select+0+156,HDMI-0:nvidia-auto-select+3286+300"
[ 12.117] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 12.117] (==) NVIDIA(0): Backing store enabled
[ 12.117] (==) NVIDIA(0): Silken mouse enabled
[ 12.117] (**) NVIDIA(0): DPMS enabled
[ 12.117] (II) Loading sub module "dri2"
[ 12.117] (II) LoadModule: "dri2"
[ 12.117] (II) Module "dri2" already built-in
[ 12.117] (II) NVIDIA(0): [DRI2] Setup complete
[ 12.117] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 12.118] (--) RandR disabled
[ 12.176] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 12.176] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 12.176] (**) Power Button: Applying InputClass "system-keyboard"
[ 12.176] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 12.176] (II) LoadModule: "evdev"
[ 12.176] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 12.177] (II) Module evdev: vendor="X.Org Foundation"
[ 12.177] compiled for 1.17.4, module version = 2.10.0
[ 12.177] Module class: X.Org XInput Driver
[ 12.177] ABI class: X.Org XInput driver, version 21.1
[ 12.177] (II) Using input driver 'evdev' for 'Power Button'
[ 12.177] (**) Power Button: always reports core events
[ 12.177] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 12.177] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 12.177] (--) evdev: Power Button: Found keys
[ 12.177] (II) evdev: Power Button: Configuring as keyboard
[ 12.177] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event5"
[ 12.177] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 12.177] (**) Option "xkb_rules" "evdev"
[ 12.177] (**) Option "xkb_layout" "us"
[ 12.177] (**) Option "xkb_variant" "intl"
[ 12.177] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 12.205] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 12.205] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 12.205] (**) Video Bus: Applying InputClass "system-keyboard"
[ 12.205] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[ 12.205] (II) Using input driver 'evdev' for 'Video Bus'
[ 12.205] (**) Video Bus: always reports core events
[ 12.205] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 12.205] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 12.205] (--) evdev: Video Bus: Found keys
[ 12.205] (II) evdev: Video Bus: Configuring as keyboard
[ 12.205] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input16/event8"
[ 12.205] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 12.205] (**) Option "xkb_rules" "evdev"
[ 12.205] (**) Option "xkb_layout" "us"
[ 12.205] (**) Option "xkb_variant" "intl"
[ 12.205] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 12.205] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 12.205] (II) No input driver specified, ignoring this device.
[ 12.205] (II) This device may have been added with another device file.
[ 12.206] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 12.206] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 12.206] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 12.206] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
[ 12.206] (II) Using input driver 'evdev' for 'Sleep Button'
[ 12.206] (**) Sleep Button: always reports core events
[ 12.206] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 12.206] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 12.206] (--) evdev: Sleep Button: Found keys
[ 12.206] (II) evdev: Sleep Button: Configuring as keyboard
[ 12.206] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8/event4"
[ 12.206] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 12.206] (**) Option "xkb_rules" "evdev"
[ 12.206] (**) Option "xkb_layout" "us"
[ 12.206] (**) Option "xkb_variant" "intl"
[ 12.206] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 12.207] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10)
[ 12.207] (II) No input driver specified, ignoring this device.
[ 12.207] (II) This device may have been added with another device file.
[ 12.207] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event11)
[ 12.207] (II) No input driver specified, ignoring this device.
[ 12.207] (II) This device may have been added with another device file.
[ 12.208] (II) config/udev: Adding input device Logitech Gaming Mouse G402 (/dev/input/event1)
[ 12.208] (**) Logitech Gaming Mouse G402: Applying InputClass "evdev pointer catchall"
[ 12.208] (II) Using input driver 'evdev' for 'Logitech Gaming Mouse G402'
[ 12.208] (**) Logitech Gaming Mouse G402: always reports core events
[ 12.208] (**) evdev: Logitech Gaming Mouse G402: Device: "/dev/input/event1"
[ 12.260] (--) evdev: Logitech Gaming Mouse G402: Vendor 0x46d Product 0xc07e
[ 12.260] (--) evdev: Logitech Gaming Mouse G402: Found 20 mouse buttons
[ 12.260] (--) evdev: Logitech Gaming Mouse G402: Found scroll wheel(s)
[ 12.260] (--) evdev: Logitech Gaming Mouse G402: Found relative axes
[ 12.260] (--) evdev: Logitech Gaming Mouse G402: Found x and y relative axes
[ 12.260] (II) evdev: Logitech Gaming Mouse G402: Configuring as mouse
[ 12.260] (II) evdev: Logitech Gaming Mouse G402: Adding scrollwheel support
[ 12.260] (**) evdev: Logitech Gaming Mouse G402: YAxisMapping: buttons 4 and 5
[ 12.260] (**) evdev: Logitech Gaming Mouse G402: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12.260] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:046D:C07E.0001/input/input5/event1"
[ 12.260] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G402" (type: MOUSE, id 9)
[ 12.260] (II) evdev: Logitech Gaming Mouse G402: initialized for relative axes.
[ 12.261] (**) Logitech Gaming Mouse G402: (accel) keeping acceleration scheme 1
[ 12.261] (**) Logitech Gaming Mouse G402: (accel) acceleration profile 0
[ 12.261] (**) Logitech Gaming Mouse G402: (accel) acceleration factor: 2.000
[ 12.261] (**) Logitech Gaming Mouse G402: (accel) acceleration threshold: 4
[ 12.262] (II) config/udev: Adding input device Logitech Gaming Mouse G402 (/dev/input/mouse0)
[ 12.262] (II) No input driver specified, ignoring this device.
[ 12.262] (II) This device may have been added with another device file.
[ 12.263] (II) config/udev: Adding input device Logitech Gaming Mouse G402 (/dev/input/event2)
[ 12.263] (**) Logitech Gaming Mouse G402: Applying InputClass "evdev keyboard catchall"
[ 12.263] (**) Logitech Gaming Mouse G402: Applying InputClass "system-keyboard"
[ 12.263] (**) Logitech Gaming Mouse G402: Applying InputClass "Keyboard Defaults"
[ 12.263] (II) Using input driver 'evdev' for 'Logitech Gaming Mouse G402'
[ 12.263] (**) Logitech Gaming Mouse G402: always reports core events
[ 12.263] (**) evdev: Logitech Gaming Mouse G402: Device: "/dev/input/event2"
[ 12.263] (--) evdev: Logitech Gaming Mouse G402: Vendor 0x46d Product 0xc07e
[ 12.263] (--) evdev: Logitech Gaming Mouse G402: Found 1 mouse buttons
[ 12.263] (--) evdev: Logitech Gaming Mouse G402: Found scroll wheel(s)
[ 12.263] (--) evdev: Logitech Gaming Mouse G402: Found relative axes
[ 12.263] (II) evdev: Logitech Gaming Mouse G402: Forcing relative x/y axes to exist.
[ 12.263] (--) evdev: Logitech Gaming Mouse G402: Found absolute axes
[ 12.263] (II) evdev: Logitech Gaming Mouse G402: Forcing absolute x/y axes to exist.
[ 12.263] (--) evdev: Logitech Gaming Mouse G402: Found keys
[ 12.263] (II) evdev: Logitech Gaming Mouse G402: Configuring as mouse
[ 12.263] (II) evdev: Logitech Gaming Mouse G402: Configuring as keyboard
[ 12.263] (II) evdev: Logitech Gaming Mouse G402: Adding scrollwheel support
[ 12.263] (**) evdev: Logitech Gaming Mouse G402: YAxisMapping: buttons 4 and 5
[ 12.263] (**) evdev: Logitech Gaming Mouse G402: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12.263] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:046D:C07E.0002/input/input6/event2"
[ 12.263] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G402" (type: KEYBOARD, id 10)
[ 12.263] (**) Option "xkb_rules" "evdev"
[ 12.263] (**) Option "xkb_layout" "us"
[ 12.263] (**) Option "xkb_variant" "intl"
[ 12.263] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 12.263] (II) evdev: Logitech Gaming Mouse G402: initialized for relative axes.
[ 12.263] (WW) evdev: Logitech Gaming Mouse G402: ignoring absolute axes.
[ 12.264] (**) Logitech Gaming Mouse G402: (accel) keeping acceleration scheme 1
[ 12.264] (**) Logitech Gaming Mouse G402: (accel) acceleration profile 0
[ 12.264] (**) Logitech Gaming Mouse G402: (accel) acceleration factor: 2.000
[ 12.264] (**) Logitech Gaming Mouse G402: (accel) acceleration threshold: 4
[ 12.264] (II) config/udev: Adding input device ASUS USB2.0 Webcam (/dev/input/event7)
[ 12.264] (**) ASUS USB2.0 Webcam: Applying InputClass "evdev keyboard catchall"
[ 12.264] (**) ASUS USB2.0 Webcam: Applying InputClass "system-keyboard"
[ 12.264] (**) ASUS USB2.0 Webcam: Applying InputClass "Keyboard Defaults"
[ 12.264] (II) Using input driver 'evdev' for 'ASUS USB2.0 Webcam'
[ 12.264] (**) ASUS USB2.0 Webcam: always reports core events
[ 12.264] (**) evdev: ASUS USB2.0 Webcam: Device: "/dev/input/event7"
[ 12.264] (--) evdev: ASUS USB2.0 Webcam: Vendor 0x1bcf Product 0x2885
[ 12.264] (--) evdev: ASUS USB2.0 Webcam: Found keys
[ 12.264] (II) evdev: ASUS USB2.0 Webcam: Configuring as keyboard
[ 12.264] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input15/event7"
[ 12.264] (II) XINPUT: Adding extended input device "ASUS USB2.0 Webcam" (type: KEYBOARD, id 11)
[ 12.264] (**) Option "xkb_rules" "evdev"
[ 12.264] (**) Option "xkb_layout" "us"
[ 12.264] (**) Option "xkb_variant" "intl"
[ 12.264] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 12.265] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[ 12.265] (II) No input driver specified, ignoring this device.
[ 12.265] (II) This device may have been added with another device file.
[ 12.266] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[ 12.266] (II) No input driver specified, ignoring this device.
[ 12.266] (II) This device may have been added with another device file.
[ 12.266] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event9)
[ 12.266] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 12.266] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
[ 12.266] (**) Asus WMI hotkeys: Applying InputClass "Keyboard Defaults"
[ 12.266] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 12.266] (**) Asus WMI hotkeys: always reports core events
[ 12.266] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event9"
[ 12.266] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 12.266] (--) evdev: Asus WMI hotkeys: Found keys
[ 12.266] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 12.266] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input17/event9"
[ 12.266] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[ 12.266] (**) Option "xkb_rules" "evdev"
[ 12.266] (**) Option "xkb_layout" "us"
[ 12.267] (**) Option "xkb_variant" "intl"
[ 12.267] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 12.267] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 12.267] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 12.267] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 12.267] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 12.267] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 12.267] (**) AT Translated Set 2 keyboard: always reports core events
[ 12.267] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 12.267] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 12.267] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 12.267] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 12.267] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 12.267] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 12.267] (**) Option "xkb_rules" "evdev"
[ 12.267] (**) Option "xkb_layout" "us"
[ 12.267] (**) Option "xkb_variant" "intl"
[ 12.267] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 12.268] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
[ 12.268] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 12.268] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 12.268] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 12.268] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 12.268] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 12.268] (II) LoadModule: "synaptics"
[ 12.269] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 12.269] (II) Module synaptics: vendor="X.Org Foundation"
[ 12.269] compiled for 1.17.4, module version = 1.8.3
[ 12.269] Module class: X.Org XInput Driver
[ 12.269] ABI class: X.Org XInput driver, version 21.1
[ 12.269] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 12.269] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 12.269] (**) Option "Device" "/dev/input/event12"
[ 12.356] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1282 - 5660 (res 42)
[ 12.356] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1106 - 4746 (res 66)
[ 12.357] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 12.357] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 12.357] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 12.357] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 12.357] (**) Option "TapButton1" "1"
[ 12.357] (**) Option "TapButton2" "2"
[ 12.357] (**) Option "TapButton3" "3"
[ 12.357] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 12.357] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 12.403] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input14/event12"
[ 12.403] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 12.403] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 12.403] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 12.403] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[ 12.403] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 12.403] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 12.403] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 12.403] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 12.404] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 12.404] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 12.404] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 12.405] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 12.405] (II) No input driver specified, ignoring this device.
[ 12.405] (II) This device may have been added with another device file.
[ 12.761] (II) UnloadModule: "synaptics"
[ 12.761] (II) evdev: AT Translated Set 2 keyboard: Close
[ 12.761] (II) UnloadModule: "evdev"
[ 12.761] (II) evdev: Asus WMI hotkeys: Close
[ 12.761] (II) UnloadModule: "evdev"
[ 12.761] (II) evdev: ASUS USB2.0 Webcam: Close
[ 12.761] (II) UnloadModule: "evdev"
[ 12.761] (II) evdev: Logitech Gaming Mouse G402: Close
[ 12.761] (II) UnloadModule: "evdev"
[ 12.761] (II) evdev: Logitech Gaming Mouse G402: Close
[ 12.761] (II) UnloadModule: "evdev"
[ 12.761] (II) evdev: Sleep Button: Close
[ 12.761] (II) UnloadModule: "evdev"
[ 12.761] (II) evdev: Video Bus: Close
[ 12.761] (II) UnloadModule: "evdev"
[ 12.761] (II) evdev: Power Button: Close
[ 12.761] (II) UnloadModule: "evdev"
[ 14.285] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 14.293] (II) Server terminated successfully (0). Closing log file.Edit:
How is using HDMI audio output related to xrandr?
That's it, it is not. Permanently_adding_undetected_resolutions will only fix the resolution issue, not what's causing it.
Something's going on with the outputs, video and audio, that's why I went for an older driver. Right now I want to fix the loop so I can see if the driver solves the video and audio outputs.
Edit2:
Just went though the log and noticed the external displays are now being recognized correctly:
[ 10.598] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 670MX at PCI:1:0:0
[ 10.599] (--) NVIDIA(0): BenQ G925HDA (CRT-0) (connected)
[ 10.599] (--) NVIDIA(0): AU Optronics Corporation (DFP-0) (boot, connected)
[ 10.599] (--) NVIDIA(0): DFP-1
[ 10.599] (--) NVIDIA(0): Samsung (DFP-2) (connected)
[ 10.599] (--) NVIDIA(0): DFP-3I also noticed an error:
[ 55738.239] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 55738.239] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 55738.239] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 55738.239] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 55738.239] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 55738.239] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 55738.239] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 55738.239] (II) NVIDIA(0): Config Options in the README.PS: lows I'm really thankful for your help, time and patience with this.
Last edited by oscarbrito (2015-11-12 23:11:34)
Offline
The ACPI is just an informational see bottom of xorg.0.log
[ 14.293] (II) Server terminated successfully (0). Closing log file.Whatever command is used to start the X server is at issue X completed successfully.
Offline
I... I don't know, I'm lost right now. I think that was when I pressed the power button to shutdown and stop the loop, if not, it would continue to the end of times.
Correction for me, it's not a bootloop, it's just a loop at login it seems.
Right now I'm playing with the xorg.conf, I also have a liveUSB chrooted but I'm out of ideas.
Offline