You are not logged in.
I would like to run Arch Linux x86_64 on an ASUS EEE 1001PXD netbook, which uses an Atheros AR9285 mini-PCIe Wi-Fi card to connect to the Internet.
The driver which comes installed with the Arch Linux live CD loads and the card is detected properly. 'wifi-menu' finds Wi-Fi networks perfectly fine and connects to them without issue, however, after a minute of accessing the Internet over Wi-Fi, the following kernel message is printed to the framebuffer many times:
ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x0002804 DMADBG_7=<changes every time the message appears>
and the access to the network is lost for a short period of time.
This obviously not only stops me from installing Arch Linux without the use of an Ethernet cable, but using a wired connection is not appropriate for what I want to use the netbook for.
I've tried setting the ath9k module's settings (and reloading the module) to:
nohwcrypt=1
as per other forum threads' solutions, but it does nothing. The message still is printed to the console, and the network access is still unreliable.
I've taken a picture of my screen here, which shows the messages along with the output of lspci: https://drive.google.com/file/d/0B9ofCw … sp=sharing
Is there a fix? Only recently have I started experiencing this issue (and I believe only in Arch Linux). I don't think I have opened this netbook up before, either.
EDIT: I've now tried connecting it to two Wi-Fi routers, one running the latest OpenWRT, and the other a Cisco Linksys router running a stock system. Both have the same issue.
Last edited by georgewhite (2016-01-24 16:25:00)
Offline