You are not logged in.
Pages: 1
Why i haven't /dev/ttyUSB0 and 1 ?
Offline
Who knows? It is simply impossible to answer that question without more details.
Offline
Personally, those devices are only created for me when I press the hotsync button on my palm pilot.
Dusty
Offline
Who knows? It is simply impossible to answer that question without more details.
What details do you need?Archlinux Noodle / kernel 2.4.32 other..?
Offline
What do you need those devices for? What hardware is connected to your USB ports? What's the output of lsusb?
Even a few general words on what you're trying to do would be a start.
Offline
Those nodes should be /dev/tts/USB[0-9]
Offline
Those nodes should be /dev/tts/USB[0-9]
what if he has a serial port?
Offline
I connect a usb data cable for mobile phone.
[DeViL@InSaNe ~]$ lsusb
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 002: ID 10ab:10c5 USI Co., Ltd Sony-Ericsson datacable
[root@InSaNe DeViL]# dmesg | grep usb
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
This is dmesg and lsusb.
Offline
Pages: 1