You are not logged in.

#1 2016-06-14 21:21:44

numb3rz
Member
Registered: 2016-06-14
Posts: 24

Kernel issues

Hello Arch Linux masters!

It seems there are issues with kernel being able to successfully/correctly talk to many hardware components on my Asus laptop, the fan is always on full blast and any attempt to switch to nvidia from an intel GPU the system always failed. After a long time of researching the forums and wiki to fix these individual issues I eventually gave up as everything I found would not work.

After having taken a little while breather I decided to give installing Arch another go. I started with giving this a completely fresh install. My steps to producing the kernel error:

  • Download the latest archlinux ISO (currently archlinux-2016.06.01-dual)

  • Boot laptop from the disk

  • Selected x86_64

  • Command line booted fine without any errors

  • Then I entered the command "shutdown now" to turn off the laptop

The error shows:

...
[    OK    ] Stopped Remout Root and Kernel File Systems.
[    OK    ] Reached target Shutdown.
/dev/mapper/control: open failed: No such device
Failure to communicate with kernel device-mapper driver.
Check that device-mapper is available in the kernel.
Incompatible libdevmapper 1.02.125 (2016-05-14) and kernel driver (unknown version).
Command failed
umount: can’t unmount /dev/loop0: Invalid argument
umount: can’t unmount /oldrun/archiso/cowspace: Invalid argument
[ 2025.678107 ] nouveau 0000:01:00.0: pci: failed to adjust lnkctl speed
[ 2184.596342 ] irq 16: nobody cared (try booting with the "irqpoll" option)
[ 2184.596407 ] handlers:
[ 2184.596416 ] [<ffffffffa06c4a20>] idma64_irq [idma64]
[ 2184.596431 ] [<ffffffffa0647710>] i2c_dw_isr [i2c_designware_core]
[ 2184.596449 ] Disabling IRQ #16

This version of archlinux appears to be giving the same issues as my last install. I do not want to go through the process of partitioning and installing KDE on my laptop again knowing there will be issues with it not using the correct GPU and the fan going full blast.

The version of archlinux I am running: archlinux-2016.06.01-dual
Laptop specs:
CPU: Intel i7-6700HQ
GPU: Nvidia GeForce GTX 960M
RAM: 16GB

I've been looking around for a long time now through multiple threads and the archlinux wiki but cannot find anything that matches this issue. My apologies if there is a duplicate out there but for the life of me I cannot seem to find any fix for this. If you require any more information at all, I will be more than happy to supply it.

Thank you for reading.

Last edited by numb3rz (2016-06-15 09:48:07)

Offline

#2 2016-06-15 02:41:14

madpierre
Member
Registered: 2016-05-27
Posts: 188

Re: Kernel issues

Command line booted fine without any errors

Then I entered the command "shutdown now" to turn off the laptop

OK. What happened in between the two?


...shutdown now ...


Have you read the Arch Wiki?

Offline

#3 2016-06-15 09:46:30

numb3rz
Member
Registered: 2016-06-14
Posts: 24

Re: Kernel issues

madpierre wrote:

Command line booted fine without any errors

Then I entered the command "shutdown now" to turn off the laptop

OK. What happened in between the two?


...shutdown now ...


Have you read the Arch Wiki?

Nothing happened between the two, it simply gives that error after booting in from a fresh ISO and performing a shutdown. The error still appears with the -hP (halt and power) flags, though that does shut down the computer quickly after those errors are displayed. Are those errors I was getting normal?

Last edited by numb3rz (2016-06-15 09:51:25)

Offline

#4 2016-06-15 14:57:58

ooo
Member
Registered: 2013-04-10
Posts: 1,607

Re: Kernel issues

I wouldn't call any errors 'normal'. However if you only get those errors when shutting down from install media, they are probably not critical, as in they wouldn't prevent you from installing / running arch.
Also, fixing the error on install media isn't trivial task, as you can't change the configuration easily.

You could just go ahead to install, and see if the errors persist after installation. If they do, there are various things you could try to get rid of them.

Offline

#5 2016-06-15 15:14:53

matthew_TKA
Member
From: Texas
Registered: 2016-06-02
Posts: 34
Website

Re: Kernel issues

Hello @numb3rz!

I share your pain with the hybrid graphics related issues on Arch.  I too had tried several different solutions ranging from the PRIME, NVIDIA, IntelGraphics, Bumblebee, and other Hybrid Graphics related wiki pages.  I also tried solutions I found on stackexchange, the Arch Forums, and many other results from google searches.

It looks like the main take away is that some of these Nvidia hybrid cards are still pretty new and don't have all the kinks worked out just yet. Throw in the Skylake processors and such and you get even more new hardware issues.

I was finally able to resolve my situation, however, and I have some information on how I fixed it on this thread.

I would get similar results as you are seeing prior to doing this, however, I have seen sooooo many different variations of the problem with different hardware that it is hard to keep track.

I noticed some more recent bug reports on the Bumblebee project seemed interesting.  You may want to also have a look here.

I hope you get your situation resolved.

My GPU is the GTX 970M.

Last edited by matthew_TKA (2016-06-15 15:16:54)


MSI GS40 6QE PHANTOM
Website

Offline

#6 2016-06-15 16:55:13

madpierre
Member
Registered: 2016-05-27
Posts: 188

Re: Kernel issues

Nothing happened between the two, it simply gives that error after booting in from a fresh ISO and performing a shutdown.


If you've done nothing between the two, nothing has changed. Your system appears to be screwed up. Since nothing has been changed, why expect it to operate differently?


The error still appears with the -hP (halt and power) flags, though that does shut down the computer quickly after those errors are displayed.


Under normal conditions, "poweroff" is the default for "shutdown". Redundancies won't alter much of anything.


Are those errors I was getting normal?


No.


The symptoms you describe are, depending the the machine and the firmware, usually associated with mobo/firmware issues or a missing/corrupted operating system- again, depending on the design of the machine at hand.


Were it me, and the health of the OS and/or kernel were in question, I would run the archiso and install, at least up to the first reboot- before creating users, permissions, installing DM, DE, etc. At a minimum, I would re-partition (likely not necessary but for the amount of effort involved, I'd do it) and re-format. Then see if anything changes. However, IMHO, anything short of running the archiso to its intended conclusion is simply asking for problems. In other words, you may find yourself "tripping over mouse turds" and "chasing ghosts".

If, after all this, fans were blowing at full speed from power-on, I'd be looking at flashing the BIOS with the current version (if applicable). Short of this, I'd reset the firmware to default settings. Otherwise possible hardware/firmware issues may be the problem...or even Asus compatibility considerations for that matter. Only you can sort it out.

Once you have a viable OS -one in which you have confidence- the questions surrounding IGP and DGP integration (hybrid graphics) come into play.

BTW, Is this a dual boot?

Last edited by madpierre (2016-06-15 20:55:12)

Offline

#7 2016-06-15 18:12:19

madpierre
Member
Registered: 2016-05-27
Posts: 188

Re: Kernel issues

numb3rz here's a link that may put things into perspective for folks like yourself and matthew_TKA, who face hybrid graphics integration problems. As matthew_TKA suggests, until Arch and Linux collectively or singularly arrive at a definitive answer, you may very well be left with no recourse other than to hack and patch your way through problems arising from the combination of hybrid graphics and Arch Linux.

https://wiki.archlinux.org/index.php/hybrid_graphics

All the best.

Last edited by madpierre (2016-06-15 18:23:42)

Offline

#8 2016-06-15 21:31:52

numb3rz
Member
Registered: 2016-06-14
Posts: 24

Re: Kernel issues

@madpierre
@matthew_TKA

Thanks a ton for your help guys! I never noticed these other links for the hybrid graphics issues and will definitely try them out soon. I do not plan on making this a dual boot system as I plan to only use Arch. I'm transitioning over from Mint as I really enjoy the idea of building everything from near scratch. Though I am not so sure the fan issue is to do with the firmware as Mint is able to talk to them just fine.

I'll be away until Monday/Tuesday, but I'll update here after installing and trying out the fixes you've supplied for the GPU.

Again, thank you very much!

Last edited by numb3rz (2016-06-15 21:32:54)

Offline

#9 2016-06-15 21:46:33

madpierre
Member
Registered: 2016-05-27
Posts: 188

Re: Kernel issues

Good luck to you.

Offline

#10 2016-06-16 22:38:52

numb3rz
Member
Registered: 2016-06-14
Posts: 24

Re: Kernel issues

Alright so I managed to squeeze some time in for this just before leaving for the weekend, I've followed this guide (including SDDM steps): https://wiki.archlinux.org/index.php/NVIDIA_Optimus

So far it seems my excessive fan blowing has been resolved, but I cannot seem to get KDE plasma 5 running even while installed. I am attempting to start the GUI with "systemctl enable sddm", I get taken to a blank page and cannot seem to do anything else whilst I am there. I'm choosing to keep SDDM disabled by default for the time being until I know I will get successfully booted into KDE when I start the computer, unless there is a better way of doing this?

/var/log/Xorg.0.log

[    38.593] (--) Log file renamed from "/var/log/Xorg.pid-456.log" to "/var/log/Xorg.0.log"
[    38.595] 
X.Org X Server 1.18.3
Release Date: 2016-04-04
[    38.595] X Protocol Version 11, Revision 0
[    38.595] Build Operating System: Linux 4.5.1-1-ARCH x86_64 
[    38.595] Current Operating System: Linux optimus 4.6.2-1-ARCH #1 SMP PREEMPT Wed Jun 8 08:40:59 CEST 2016 x86_64
[    38.595] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=62f06e40-666b-42a5-bd32-c7ca670ac247 rw quiet
[    38.595] Build Date: 03 June 2016  07:28:24AM
[    38.595]  
[    38.595] Current version of pixman: 0.34.0
[    38.595] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[    38.595] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    38.595] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 16 23:29:03 2016
[    38.598] (==) Using config file: "/etc/X11/xorg.conf"
[    38.598] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    38.600] (==) No Layout section.  Using the first Screen section.
[    38.600] (==) No screen section available. Using defaults.
[    38.600] (**) |-->Screen "Default Screen Section" (0)
[    38.600] (**) |   |-->Monitor "<default monitor>"
[    38.601] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    38.601] (**) |   |-->Device "nvidia"
[    38.601] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    38.601] (==) Automatically adding devices
[    38.601] (==) Automatically enabling devices
[    38.601] (==) Automatically adding GPU devices
[    38.601] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    38.603] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    38.603] 	Entry deleted from font path.
[    38.605] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    38.605] (==) ModulePath set to "/usr/lib/xorg/modules"
[    38.605] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    38.606] (II) Loader magic: 0x821d20
[    38.606] (II) Module ABI versions:
[    38.606] 	X.Org ANSI C Emulation: 0.4
[    38.606] 	X.Org Video Driver: 20.0
[    38.606] 	X.Org XInput driver : 22.1
[    38.606] 	X.Org Server Extension : 9.0
[    38.607] (++) using VT number 1

[    38.607] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    38.608] (II) xfree86: Adding drm device (/dev/dri/card1)
[    38.608] (II) xfree86: Adding drm device (/dev/dri/card0)
[    38.611] (--) PCI:*(0:0:2:0) 8086:191b:1043:1d6d rev 6, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    38.611] (--) PCI: (0:1:0:0) 10de:139b:1043:1d6d rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    38.611] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    38.611] (II) "glx" will be loaded by default.
[    38.611] (II) LoadModule: "modsetting"
[    38.614] (WW) Warning, couldn't open module modsetting
[    38.614] (II) UnloadModule: "modsetting"
[    38.614] (II) Unloading modsetting
[    38.614] (EE) Failed to load module "modsetting" (module does not exist, 0)
[    38.614] (II) LoadModule: "glx"
[    38.614] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    38.670] (II) Module glx: vendor="NVIDIA Corporation"
[    38.670] 	compiled for 4.0.2, module version = 1.0.0
[    38.670] 	Module class: X.Org Server Extension
[    38.670] (II) NVIDIA GLX Module  367.27  Thu Jun  9 18:19:55 PDT 2016
[    38.671] (II) LoadModule: "nvidia"
[    38.671] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    38.678] (II) Module nvidia: vendor="NVIDIA Corporation"
[    38.678] 	compiled for 4.0.2, module version = 1.0.0
[    38.678] 	Module class: X.Org Video Driver
[    38.678] (II) NVIDIA dlloader X Driver  367.27  Thu Jun  9 17:57:30 PDT 2016
[    38.678] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    38.680] (II) Loading sub module "fb"
[    38.680] (II) LoadModule: "fb"
[    38.680] (II) Loading /usr/lib/xorg/modules/libfb.so
[    38.681] (II) Module fb: vendor="X.Org Foundation"
[    38.681] 	compiled for 1.18.3, module version = 1.0.0
[    38.681] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    38.681] (II) Loading sub module "wfb"
[    38.681] (II) LoadModule: "wfb"
[    38.681] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    38.682] (II) Module wfb: vendor="X.Org Foundation"
[    38.682] 	compiled for 1.18.3, module version = 1.0.0
[    38.682] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    38.682] (II) Loading sub module "ramdac"
[    38.682] (II) LoadModule: "ramdac"
[    38.683] (II) Module "ramdac" already built-in
[    38.684] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    38.684] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    38.684] (==) NVIDIA(0): RGB weight 888
[    38.684] (==) NVIDIA(0): Default visual is TrueColor
[    38.684] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    38.685] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[    38.685] (**) NVIDIA(0): Enabling 2D acceleration
[    38.909] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 960M (GM107-A) at PCI:1:0:0 (GPU-0)
[    38.909] (--) NVIDIA(0): Memory: 2097152 kBytes
[    38.909] (--) NVIDIA(0): VideoBIOS: 82.07.94.00.0d
[    38.909] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    38.909] (II) NVIDIA(0): Validated MetaModes:
[    38.909] (II) NVIDIA(0):     "NULL"
[    38.909] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[    38.909] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[    38.909] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    38.909] (--) Depth 24 pixmap format is 32 bpp
[    38.910] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[    38.910] (II) NVIDIA:     access.
[    38.914] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    38.914] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    38.914] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    38.914] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    38.914] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    38.914] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    38.914] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    38.914] (II) NVIDIA(0):     Config Options in the README.
[    38.933] (II) NVIDIA(0): Setting mode "NULL"
[    38.940] (==) NVIDIA(0): Disabling shared memory pixmaps
[    38.940] (==) NVIDIA(0): Backing store enabled
[    38.940] (==) NVIDIA(0): Silken mouse enabled
[    38.941] (==) NVIDIA(0): DPMS enabled
[    38.942] (II) Loading sub module "dri2"
[    38.942] (II) LoadModule: "dri2"
[    38.942] (II) Module "dri2" already built-in
[    38.942] (II) NVIDIA(0): [DRI2] Setup complete
[    38.942] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    38.942] (--) RandR disabled
[    38.950] (II) Initializing extension GLX
[    38.950] (II) Indirect GLX disabled.
[    39.064] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    39.064] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    39.064] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    39.064] (II) LoadModule: "libinput"
[    39.064] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    39.074] (II) Module libinput: vendor="X.Org Foundation"
[    39.074] 	compiled for 1.18.3, module version = 0.19.0
[    39.074] 	Module class: X.Org XInput Driver
[    39.074] 	ABI class: X.Org XInput driver, version 22.1
[    39.074] (II) Using input driver 'libinput' for 'Power Button'
[    39.074] (**) Power Button: always reports core events
[    39.074] (**) Option "Device" "/dev/input/event4"
[    39.074] (**) Option "_source" "server/udev"
[    39.075] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[    39.075] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[    39.090] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    39.090] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    39.090] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[    39.090] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[    39.091] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event2)
[    39.091] (**) Asus Wireless Radio Control: Applying InputClass "evdev keyboard catchall"
[    39.091] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[    39.091] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[    39.091] (**) Asus Wireless Radio Control: always reports core events
[    39.091] (**) Option "Device" "/dev/input/event2"
[    39.091] (**) Option "_source" "server/udev"
[    39.091] (II) input device 'Asus Wireless Radio Control', /dev/input/event2 is tagged by udev as: Keyboard
[    39.091] (II) input device 'Asus Wireless Radio Control', /dev/input/event2 is a keyboard
[    39.103] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input2/event2"
[    39.103] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[    39.104] (II) input device 'Asus Wireless Radio Control', /dev/input/event2 is tagged by udev as: Keyboard
[    39.104] (II) input device 'Asus Wireless Radio Control', /dev/input/event2 is a keyboard
[    39.104] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    39.104] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    39.104] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    39.104] (II) Using input driver 'libinput' for 'Video Bus'
[    39.104] (**) Video Bus: always reports core events
[    39.104] (**) Option "Device" "/dev/input/event7"
[    39.104] (**) Option "_source" "server/udev"
[    39.105] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    39.105] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    39.116] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event7"
[    39.116] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    39.117] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    39.117] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    39.118] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    39.118] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    39.118] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    39.118] (II) Using input driver 'libinput' for 'Video Bus'
[    39.118] (**) Video Bus: always reports core events
[    39.118] (**) Option "Device" "/dev/input/event8"
[    39.118] (**) Option "_source" "server/udev"
[    39.119] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    39.119] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    39.130] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input8/event8"
[    39.130] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[    39.131] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    39.131] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    39.131] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    39.131] (II) No input driver specified, ignoring this device.
[    39.131] (II) This device may have been added with another device file.
[    39.132] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    39.132] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    39.132] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    39.132] (II) Using input driver 'libinput' for 'Sleep Button'
[    39.132] (**) Sleep Button: always reports core events
[    39.132] (**) Option "Device" "/dev/input/event3"
[    39.132] (**) Option "_source" "server/udev"
[    39.132] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    39.132] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    39.143] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3"
[    39.143] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    39.144] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    39.144] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    39.145] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event6)
[    39.145] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
[    39.145] (**) USB2.0 HD UVC WebCam: Applying InputClass "libinput keyboard catchall"
[    39.145] (II) Using input driver 'libinput' for 'USB2.0 HD UVC WebCam'
[    39.145] (**) USB2.0 HD UVC WebCam: always reports core events
[    39.146] (**) Option "Device" "/dev/input/event6"
[    39.146] (**) Option "_source" "server/udev"
[    39.146] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event6 is tagged by udev as: Keyboard
[    39.146] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event6 is a keyboard
[    39.170] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input6/event6"
[    39.170] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 11)
[    39.171] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event6 is tagged by udev as: Keyboard
[    39.171] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event6 is a keyboard
[    39.171] (II) config/udev: Adding input device Elan Touchpad (/dev/input/event10)
[    39.172] (**) Elan Touchpad: Applying InputClass "evdev touchpad catchall"
[    39.172] (**) Elan Touchpad: Applying InputClass "evdev touchscreen catchall"
[    39.172] (**) Elan Touchpad: Applying InputClass "libinput touchpad catchall"
[    39.172] (**) Elan Touchpad: Applying InputClass "libinput touchscreen catchall"
[    39.172] (**) Elan Touchpad: Applying InputClass "touchpad catchall"
[    39.172] (**) Elan Touchpad: Applying InputClass "Default clickpad buttons"
[    39.172] (II) LoadModule: "synaptics"
[    39.172] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    39.174] (II) Module synaptics: vendor="X.Org Foundation"
[    39.174] 	compiled for 1.18.3, module version = 1.8.99
[    39.174] 	Module class: X.Org XInput Driver
[    39.174] 	ABI class: X.Org XInput driver, version 22.1
[    39.174] (II) Using input driver 'synaptics' for 'Elan Touchpad'
[    39.174] (**) Elan Touchpad: always reports core events
[    39.174] (**) Option "Device" "/dev/input/event10"
[    39.203] (II) synaptics: Elan Touchpad: found clickpad property
[    39.203] (--) synaptics: Elan Touchpad: x-axis range 0 - 3097 (res 32)
[    39.203] (--) synaptics: Elan Touchpad: y-axis range 0 - 2119 (res 33)
[    39.203] (--) synaptics: Elan Touchpad: pressure range 0 - 255
[    39.203] (--) synaptics: Elan Touchpad: finger width range 0 - 15
[    39.203] (--) synaptics: Elan Touchpad: buttons: left double triple
[    39.203] (--) synaptics: Elan Touchpad: Vendor 0x4f3 Product 0x5
[    39.203] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    39.203] (--) synaptics: Elan Touchpad: touchpad found
[    39.203] (**) Elan Touchpad: always reports core events
[    39.230] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-ELAN1000:00/input/input10/event10"
[    39.230] (II) XINPUT: Adding extended input device "Elan Touchpad" (type: TOUCHPAD, id 12)
[    39.230] (**) synaptics: Elan Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    39.230] (**) synaptics: Elan Touchpad: (accel) MaxSpeed is now 1.75
[    39.230] (**) synaptics: Elan Touchpad: (accel) AccelFactor is now 0.053
[    39.230] (**) Elan Touchpad: (accel) keeping acceleration scheme 1
[    39.230] (**) Elan Touchpad: (accel) acceleration profile 1
[    39.230] (**) Elan Touchpad: (accel) acceleration factor: 2.000
[    39.230] (**) Elan Touchpad: (accel) acceleration threshold: 4
[    39.230] (--) synaptics: Elan Touchpad: touchpad found
[    39.231] (II) config/udev: Adding input device Elan Touchpad (/dev/input/mouse0)
[    39.231] (**) Elan Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    39.231] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[    39.232] (II) No input driver specified, ignoring this device.
[    39.232] (II) This device may have been added with another device file.
[    39.232] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[    39.232] (II) No input driver specified, ignoring this device.
[    39.232] (II) This device may have been added with another device file.
[    39.232] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[    39.232] (II) No input driver specified, ignoring this device.
[    39.233] (II) This device may have been added with another device file.
[    39.233] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[    39.233] (II) No input driver specified, ignoring this device.
[    39.233] (II) This device may have been added with another device file.
[    39.233] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[    39.233] (II) No input driver specified, ignoring this device.
[    39.234] (II) This device may have been added with another device file.
[    39.234] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event16)
[    39.234] (II) No input driver specified, ignoring this device.
[    39.234] (II) This device may have been added with another device file.
[    39.234] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event9)
[    39.235] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    39.235] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    39.235] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[    39.235] (**) Asus WMI hotkeys: always reports core events
[    39.235] (**) Option "Device" "/dev/input/event9"
[    39.235] (**) Option "_source" "server/udev"
[    39.235] (II) input device 'Asus WMI hotkeys', /dev/input/event9 is tagged by udev as: Keyboard
[    39.235] (II) input device 'Asus WMI hotkeys', /dev/input/event9 is a keyboard
[    39.250] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input9/event9"
[    39.250] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 13)
[    39.251] (II) input device 'Asus WMI hotkeys', /dev/input/event9 is tagged by udev as: Keyboard
[    39.251] (II) input device 'Asus WMI hotkeys', /dev/input/event9 is a keyboard
[    39.251] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    39.251] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    39.251] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    39.251] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    39.251] (**) AT Translated Set 2 keyboard: always reports core events
[    39.251] (**) Option "Device" "/dev/input/event0"
[    39.251] (**) Option "_source" "server/udev"
[    39.252] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    39.252] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    39.276] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    39.276] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[    39.277] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    39.277] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    39.278] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    39.278] (II) No input driver specified, ignoring this device.
[    39.278] (II) This device may have been added with another device file.
[    75.995] (II) UnloadModule: "libinput"
[    75.995] (II) UnloadModule: "libinput"
[    75.995] (II) UnloadModule: "synaptics"
[    75.995] (II) UnloadModule: "libinput"
[    75.995] (II) UnloadModule: "libinput"
[    75.995] (II) UnloadModule: "libinput"
[    75.995] (II) UnloadModule: "libinput"
[    75.995] (II) UnloadModule: "libinput"
[    75.995] (II) UnloadModule: "libinput"
[    76.021] (II) NVIDIA(GPU-0): Deleting GPU-0
[    76.025] (II) Server terminated successfully (0). Closing log file.

/etc/X11/xorg.conf

Section "Module"
    Load "modsetting"
EndSection

Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "1:0:0"
    Option "AllowEmptyInitialConfiguration"
EndSection

Packages installed (KDE): plasma kdebase

If anyone could shine some light on this issue I would be very grateful. And as always, any other information you need just let me know.

Last edited by numb3rz (2016-06-16 22:42:51)

Offline

Board footer

Powered by FluxBB