You are not logged in.

#1 2016-06-15 13:57:10

frank0393
Member
Registered: 2016-02-23
Posts: 6

PCI passthrough with an unsupported GPU

Hi,

I’ve been trying to do a VGA Passthrough these last two days with no avail.
IOMMU only returns “[0.000000] DMAR: IOMMU enabled” without any extra information, and the “iommu_groups” folder is completely empty.
My processor and motherboard are both compatible with IOMMU and VT-x, but my GPU isn’t compatible with UEFI. Is that the problem, or am I missing a step?

Thanks.


Specs:
HP Pavilion p6-2017es
Mobo: H-CUPERTINO2-H61-uA TX (Cupertino2) → Intel H61
CPU: Intel Core i7 2600
RAM: 6 GB DDR3
Dedicated GPU: NVIDIA GeForce GT 530 2 GB
Integrated GPU: Intel® HD Graphics 2000
More info

Offline

#2 2016-06-16 22:38:11

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 10,140

Re: PCI passthrough with an unsupported GPU

My processor and motherboard are both compatible with IOMMU and VT-x

If that's correct pci passthrough won't work as it requires Intel VT-d or AMD-VI .

please post lscpu output


Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
Did you use the guided installer ? If yes, I can't help you.

(A works at time B)  && (time C > time B ) ≠  (A works at time C)

Offline

#3 2016-06-17 07:12:02

frank0393
Member
Registered: 2016-02-23
Posts: 6

Re: PCI passthrough with an unsupported GPU

Here you go:

$ lscpu
Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                8
On-line CPU(s) list:   0-7
Thread(s) per core:    2
Core(s) per socket:    4
Socket(s):             1
NUMA node(s):          1
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 42
Model name:            Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
Stepping:              7
CPU MHz:               1600.390
CPU max MHz:           3800,0000
CPU min MHz:           1600,0000
BogoMIPS:              6787.38
Virtualization:        VT-x
L1d cache:             32K
L1i cache:             32K
L2 cache:              256K
L3 cache:              8192K
NUMA node0 CPU(s):     0-7
Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm epb tpr_shadow vnmi flexpriority ept vpid xsaveopt dtherm ida arat pln pts

Offline

#4 2016-06-17 09:02:44

Omar007
Member
Registered: 2015-04-09
Posts: 368

Re: PCI passthrough with an unsupported GPU

That CPU should support VT-d. Do you have VT-d enabled in your BIOS?
Also, do you have intel_iommu=on in your kernel arguments?

Offline

#5 2016-06-17 09:50:20

frank0393
Member
Registered: 2016-02-23
Posts: 6

Re: PCI passthrough with an unsupported GPU

Omar007 wrote:

That CPU should support VT-d. Do you have VT-d enabled in your BIOS?
Also, do you have intel_iommu=on in your kernel arguments?

Yes, absolutely. And I already added the option in the kernel boot parameters. But after the boot all I get is:

$ dmesg|grep -e DMAR -e IOMMU
[0.000000] DMAR: IOMMU enabled

And I don't see any IOMMU groups or anything related.

Offline

#6 2016-06-17 14:03:17

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 10,140

Re: PCI passthrough with an unsupported GPU

What brand and model is your motherboard ?

Are you using latest firmware for it ?

please post full dmesg .


Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
Did you use the guided installer ? If yes, I can't help you.

(A works at time B)  && (time C > time B ) ≠  (A works at time C)

Offline

#7 2016-06-17 14:44:41

frank0393
Member
Registered: 2016-02-23
Posts: 6

Re: PCI passthrough with an unsupported GPU

Lone_Wolf wrote:

What brand and model is your motherboard ?

Are you using latest firmware for it ?

please post full dmesg .

The motherboard is a H-CUPERTINO2-H61-uA TX (Cupertino2); made by Foxconn. It has an Intel H61 chipset inside. Here's the info: http://h20564.www2.hp.com/hpsc/doc/publ … -c03057185
Yes, everything is updated.

And here's the full dmesg:

$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x29, date = 2013-06-12
[    0.000000] Linux version 4.6.2-1-ARCH (builduser@tobias) (gcc version 6.1.1 20160602 (GCC) ) #1 SMP PREEMPT Wed Jun 8 08:40:59 CEST 2016
[    0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=LABEL=LINUX rw scsi_mod.use_blk_mq=1 nvidia-drm.modeset=1 libahci.ignore_sss=1 intel_iommu=on
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000baa93fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000baa94000-0x00000000baae0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000baae1000-0x00000000baae8fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000baae9000-0x00000000baafefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000baaff000-0x00000000bab00fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bab01000-0x00000000bab0efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bab0f000-0x00000000bab5ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bab60000-0x00000000baba2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000baba3000-0x00000000bae1dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bae1e000-0x00000000bae23fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bae24000-0x00000000bae37fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bae38000-0x00000000baff3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000baff4000-0x00000000baffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bbe00000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bf7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x013c5018-0x013d4257] usable ==> usable
[    0.000000] e820: update [mem 0x013d5018-0x013e5057] usable ==> usable
[    0.000000] e820: update [mem 0x011ca018-0x011d6857] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000011ca017] usable
[    0.000000] reserve setup_data: [mem 0x00000000011ca018-0x00000000011d6857] usable
[    0.000000] reserve setup_data: [mem 0x00000000011d6858-0x00000000013c5017] usable
[    0.000000] reserve setup_data: [mem 0x00000000013c5018-0x00000000013d4257] usable
[    0.000000] reserve setup_data: [mem 0x00000000013d4258-0x00000000013d5017] usable
[    0.000000] reserve setup_data: [mem 0x00000000013d5018-0x00000000013e5057] usable
[    0.000000] reserve setup_data: [mem 0x00000000013e5058-0x000000001fffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000040200000-0x00000000baa93fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000baa94000-0x00000000baae0fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000baae1000-0x00000000baae8fff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000baae9000-0x00000000baafefff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000baaff000-0x00000000bab00fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000bab01000-0x00000000bab0efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000bab0f000-0x00000000bab5ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000bab60000-0x00000000baba2fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000baba3000-0x00000000bae1dfff] usable
[    0.000000] reserve setup_data: [mem 0x00000000bae1e000-0x00000000bae23fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000bae24000-0x00000000bae37fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000bae38000-0x00000000baff3fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000baff4000-0x00000000baffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000bbe00000-0x00000000bfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000001bf7fffff] usable
[    0.000000] efi: EFI v2.10 by American Megatrends
[    0.000000] efi:  SMBIOS=0xbab5ed98  ACPI=0xbaae1000  ACPI 2.0=0xbaae1000  MPS=0xfc930 
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Hewlett-Packard p6-2017esm/2ABF, BIOS 7.16 03/23/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1bf800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-DFFFF uncachable
[    0.000000]   E0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 0BB800000 mask FFF800000 uncachable
[    0.000000]   2 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   3 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   4 base 1BF800000 mask FFF800000 uncachable
[    0.000000]   5 base 1C0000000 mask FC0000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcc60-0x000fcc6f] mapped at [ffff8800000fcc60]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x03b4f000, 0x03b4ffff] PGTABLE
[    0.000000] BRK [0x03b50000, 0x03b50fff] PGTABLE
[    0.000000] BRK [0x03b51000, 0x03b51fff] PGTABLE
[    0.000000] BRK [0x03b52000, 0x03b52fff] PGTABLE
[    0.000000] BRK [0x03b53000, 0x03b53fff] PGTABLE
[    0.000000] BRK [0x03b54000, 0x03b54fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x7f535000-0x7fffffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000BAAE1000 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x00000000BAAE1070 00005C (v01 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000BAAE7C78 0000F4 (v04 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000BAAE1158 006B1B (v02 HPQOEM SLIC-CPC 00000006 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000BAB06F80 000040
[    0.000000] ACPI: APIC 0x00000000BAAE7D70 000092 (v03 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000BAAE7E08 0001D6 (v01 HPQOEM SLIC-CPC 00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 0x00000000BAAE7FE0 00003C (v01 HPQOEM SLIC-CPC 01072009 MSFT 00000097)
[    0.000000] ACPI: SLIC 0x00000000BAAE8020 000176 (v01 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.000000] ACPI: HPET 0x00000000BAAE8198 000038 (v01 HPQOEM SLIC-CPC 01072009 AMI. 00000004)
[    0.000000] ACPI: DBGP 0x00000000BAAE81D0 000034 (v01 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bf7fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1bf7f8000-0x1bf7fbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001bf7fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000baa93fff]
[    0.000000]   node   0: [mem 0x00000000baaff000-0x00000000bab00fff]
[    0.000000]   node   0: [mem 0x00000000baba3000-0x00000000bae1dfff]
[    0.000000]   node   0: [mem 0x00000000bae24000-0x00000000bae37fff]
[    0.000000]   node   0: [mem 0x00000000baff4000-0x00000000baffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001bf7fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bf7fffff]
[    0.000000] On node 0 totalpages: 1548496
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11877 pages used for memmap
[    0.000000]   DMA32 zone: 760113 pages, LIFO batch:31
[    0.000000]   Normal zone: 12256 pages used for memmap
[    0.000000]   Normal zone: 784384 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xbc000000-0xbfffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x011ca000-0x011cafff]
[    0.000000] PM: Registered nosave memory: [mem 0x011d6000-0x011d6fff]
[    0.000000] PM: Registered nosave memory: [mem 0x013c5000-0x013c5fff]
[    0.000000] PM: Registered nosave memory: [mem 0x013d4000-0x013d4fff]
[    0.000000] PM: Registered nosave memory: [mem 0x013d5000-0x013d5fff]
[    0.000000] PM: Registered nosave memory: [mem 0x013e5000-0x013e5fff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaa94000-0xbaae0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaae1000-0xbaae8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaae9000-0xbaafefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbab01000-0xbab0efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbab0f000-0xbab5ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbab60000-0xbaba2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbae1e000-0xbae23fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbae38000-0xbaff3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbbdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbe00000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xfed1bfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 32 pages/cpu @ffff8801bf400000 s93464 r8192 d29416 u262144
[    0.000000] pcpu-alloc: s93464 r8192 d29416 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1524299
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=LABEL=LINUX rw scsi_mod.use_blk_mq=1 nvidia-drm.modeset=1 libahci.ignore_sss=1 intel_iommu=on
[    0.000000] DMAR: IOMMU enabled
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 5981052K/6193984K available (5935K kernel code, 974K rwdata, 1796K rodata, 1224K init, 1152K bss, 212932K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:8448 nr_irqs:488 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3392.470 MHz processor
[    0.000026] Calibrating delay loop (skipped), value calculated using timer frequency.. 6787.64 BogoMIPS (lpj=11308233)
[    0.000028] pid_max: default: 32768 minimum: 301
[    0.000032] ACPI: Core revision 20160108
[    0.002646] ACPI: 2 ACPI AML tables successfully acquired and loaded

[    0.011990] Security Framework initialized
[    0.011992] Yama: becoming mindful.
[    0.012341] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.013513] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.014038] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.014045] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.014225] CPU: Physical Processor ID: 0
[    0.014226] CPU: Processor Core ID: 0
[    0.014230] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.014231] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.014232] mce: CPU supports 9 MCE banks
[    0.014242] CPU0: Thermal monitoring enabled (TM1)
[    0.014247] process: using mwait in idle threads
[    0.014250] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.014251] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.014533] Freeing SMP alternatives memory: 24K (ffffffff81a27000 - ffffffff81a2d000)
[    0.015978] ftrace: allocating 23494 entries in 92 pages
[    0.024116] smpboot: Max logical packages: 2
[    0.024118] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.024188] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.024613] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.057618] TSC deadline timer enabled
[    0.057621] smpboot: CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.057629] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.057644] ... version:                3
[    0.057645] ... bit width:              48
[    0.057646] ... generic registers:      4
[    0.057647] ... value mask:             0000ffffffffffff
[    0.057647] ... max period:             0000ffffffffffff
[    0.057648] ... fixed-purpose events:   3
[    0.057649] ... event mask:             000000070000000f
[    0.077785] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.094337] x86: Booting SMP configuration:
[    0.094339] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.759928] x86: Booted up 1 node, 8 CPUs
[    0.759931] smpboot: Total of 8 processors activated (54310.57 BogoMIPS)
[    0.766301] devtmpfs: initialized
[    0.766348] x86/mm: Memory block size: 128MB
[    0.768098] PM: Registering ACPI NVS region [mem 0xbaa94000-0xbaae0fff] (315392 bytes)
[    0.768102] PM: Registering ACPI NVS region [mem 0xbab01000-0xbab0efff] (57344 bytes)
[    0.768103] PM: Registering ACPI NVS region [mem 0xbab60000-0xbaba2fff] (274432 bytes)
[    0.768165] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.768215] pinctrl core: initialized pinctrl subsystem
[    0.768259] RTC time: 14:28:58, date: 06/17/16
[    0.768342] NET: Registered protocol family 16
[    0.779371] cpuidle: using governor ladder
[    0.792715] cpuidle: using governor menu
[    0.792803] ACPI: bus type PCI registered
[    0.792804] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.792854] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.792856] PCI: not using MMCONFIG
[    0.792857] PCI: Using configuration type 1 for base access
[    0.792878] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.809515] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.809697] ACPI: Added _OSI(Module Device)
[    0.809699] ACPI: Added _OSI(Processor Device)
[    0.809700] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.809701] ACPI: Added _OSI(Processor Aggregator Device)
[    0.809905] ACPI: Executed 1 blocks of module-level executable AML code
[    0.811877] ACPI: Dynamic OEM Table Load:
[    0.811881] ACPI: SSDT 0xFFFF8801B7422000 00079C (v01 AMI    IST      00000001 MSFT 03000001)
[    0.812178] ACPI: Dynamic OEM Table Load:
[    0.812181] ACPI: SSDT 0xFFFF8801B7749400 00021C (v01 AMI    CST      00000001 MSFT 03000001)
[    0.812836] ACPI: Interpreter enabled
[    0.812849] ACPI: (supports S0 S1 S3 S4 S5)
[    0.812850] ACPI: Using IOAPIC for interrupt routing
[    0.812869] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.812907] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.812910] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.813139] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.813371] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.816223] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.816227] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.816344] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.816528] PCI host bridge to bus 0000:00
[    0.816530] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.816532] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.816533] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.816534] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.816535] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.816536] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.816537] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[    0.816539] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.816545] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.816612] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.816636] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.816665] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.816696] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[    0.816703] pci 0000:00:02.0: reg 0x10: [mem 0xfb400000-0xfb7fffff 64bit]
[    0.816707] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.816710] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.816790] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.816809] pci 0000:00:16.0: reg 0x10: [mem 0xfba08000-0xfba0800f 64bit]
[    0.816877] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.816942] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.816958] pci 0000:00:1a.0: reg 0x10: [mem 0xfba07000-0xfba073ff]
[    0.817036] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.817068] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.817100] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.817114] pci 0000:00:1b.0: reg 0x10: [mem 0xfba00000-0xfba03fff 64bit]
[    0.817171] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.817232] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.817301] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.817336] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.817366] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.817435] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.817469] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.817499] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[    0.817568] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.817602] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.817632] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.817701] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.817736] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.817765] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.817834] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.817869] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.817898] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[    0.817967] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.818001] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.818032] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.818048] pci 0000:00:1d.0: reg 0x10: [mem 0xfba06000-0xfba063ff]
[    0.818125] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.818157] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.818188] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.818334] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.818347] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.818354] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.818361] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.818368] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.818375] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.818382] pci 0000:00:1f.2: reg 0x24: [mem 0xfba05000-0xfba057ff]
[    0.818418] pci 0000:00:1f.2: PME# supported from D3hot
[    0.818471] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.818484] pci 0000:00:1f.3: reg 0x10: [mem 0xfba04000-0xfba040ff 64bit]
[    0.818503] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.818594] pci 0000:01:00.0: [10de:0de5] type 00 class 0x030000
[    0.818602] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[    0.818611] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
[    0.818619] pci 0000:01:00.0: reg 0x1c: [mem 0xd8000000-0xd9ffffff 64bit pref]
[    0.818624] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.818630] pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
[    0.818698] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
[    0.818706] pci 0000:01:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
[    0.826073] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.826078] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.826081] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfb0fffff]
[    0.826086] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
[    0.826149] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.826211] pci 0000:03:00.0: [1814:5390] type 00 class 0x028000
[    0.826229] pci 0000:03:00.0: reg 0x10: [mem 0xfb900000-0xfb90ffff]
[    0.836085] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.836095] pci 0000:00:1c.1:   bridge window [mem 0xfb900000-0xfb9fffff]
[    0.836157] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.836202] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.836245] pci 0000:00:1c.4: PCI bridge to [bus 06]
[    0.836314] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
[    0.836337] pci 0000:07:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.836370] pci 0000:07:00.0: reg 0x18: [mem 0xfb800000-0xfb800fff 64bit]
[    0.836390] pci 0000:07:00.0: reg 0x20: [mem 0xda100000-0xda103fff 64bit pref]
[    0.836495] pci 0000:07:00.0: supports D1 D2
[    0.836496] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.836542] pci 0000:07:00.0: System wakeup disabled by ACPI
[    0.846093] pci 0000:00:1c.5: PCI bridge to [bus 07]
[    0.846098] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.846104] pci 0000:00:1c.5:   bridge window [mem 0xfb800000-0xfb8fffff]
[    0.846113] pci 0000:00:1c.5:   bridge window [mem 0xda100000-0xda1fffff 64bit pref]
[    0.846394] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.846433] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.846471] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.846508] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.846546] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.846585] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.846623] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.846660] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.846701] ACPI: Enabled 3 GPEs in block 00 to 3F
[    0.846773] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=mem,locks=none
[    0.846776] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.846777] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.846778] vgaarb: loaded
[    0.846779] vgaarb: bridge control possible 0000:01:00.0
[    0.846780] vgaarb: no bridge control possible 0000:00:02.0
[    0.846879] PCI: Using ACPI for IRQ routing
[    0.852780] PCI: pci_cache_line_size set to 64 bytes
[    0.852826] e820: reserve RAM buffer [mem 0x011ca018-0x03ffffff]
[    0.852827] e820: reserve RAM buffer [mem 0x013c5018-0x03ffffff]
[    0.852828] e820: reserve RAM buffer [mem 0x013d5018-0x03ffffff]
[    0.852829] e820: reserve RAM buffer [mem 0xbaa94000-0xbbffffff]
[    0.852831] e820: reserve RAM buffer [mem 0xbab01000-0xbbffffff]
[    0.852832] e820: reserve RAM buffer [mem 0xbae1e000-0xbbffffff]
[    0.852833] e820: reserve RAM buffer [mem 0xbae38000-0xbbffffff]
[    0.852834] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[    0.852835] e820: reserve RAM buffer [mem 0x1bf800000-0x1bfffffff]
[    0.852918] NetLabel: Initializing
[    0.852919] NetLabel:  domain hash size = 128
[    0.852919] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.852929] NetLabel:  unlabeled traffic allowed by default
[    0.852970] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.852974] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.854993] clocksource: Switched to clocksource hpet
[    0.858862] VFS: Disk quotas dquot_6.6.0
[    0.858877] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.858949] pnp: PnP ACPI init
[    0.859039] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[    0.859041] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.859042] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.859044] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.859046] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.859049] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.859145] system 00:01: [io  0x0a40-0x0a5f] has been reserved
[    0.859147] system 00:01: [io  0x0a30-0x0a3f] has been reserved
[    0.859149] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.859186] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.859222] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.859224] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.859333] system 00:04: [io  0x0400-0x0453] could not be reserved
[    0.859334] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.859336] system 00:04: [io  0x1180-0x119f] has been reserved
[    0.859337] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.859339] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.859340] system 00:04: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.859341] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.859343] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.859345] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.859383] system 00:05: [io  0x0454-0x0457] has been reserved
[    0.859385] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.859503] pnp: PnP ACPI: found 6 devices
[    0.865377] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.865423] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.865425] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.865428] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfb0fffff]
[    0.865429] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
[    0.865432] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.865442] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.865447] pci 0000:00:1c.1:   bridge window [mem 0xfb900000-0xfb9fffff]
[    0.865454] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.865464] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.865474] pci 0000:00:1c.4: PCI bridge to [bus 06]
[    0.865484] pci 0000:00:1c.5: PCI bridge to [bus 07]
[    0.865487] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.865491] pci 0000:00:1c.5:   bridge window [mem 0xfb800000-0xfb8fffff]
[    0.865495] pci 0000:00:1c.5:   bridge window [mem 0xda100000-0xda1fffff 64bit pref]
[    0.865501] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.865502] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.865503] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.865504] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.865505] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.865506] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.865508] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[    0.865509] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.865510] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff]
[    0.865511] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref]
[    0.865512] pci_bus 0000:03: resource 1 [mem 0xfb900000-0xfb9fffff]
[    0.865514] pci_bus 0000:07: resource 0 [io  0xd000-0xdfff]
[    0.865515] pci_bus 0000:07: resource 1 [mem 0xfb800000-0xfb8fffff]
[    0.865516] pci_bus 0000:07: resource 2 [mem 0xda100000-0xda1fffff 64bit pref]
[    0.865536] NET: Registered protocol family 2
[    0.865665] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.865761] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.865875] TCP: Hash tables configured (established 65536 bind 65536)
[    0.865896] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.865916] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.865963] NET: Registered protocol family 1
[    1.115076] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.115088] PCI: CLS 64 bytes, default 64
[    1.115121] Unpacking initramfs...
[    1.218303] Freeing initrd memory: 11052K (ffff88007f535000 - ffff880080000000)
[    1.218350] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.218352] software IO TLB [mem 0xb6a94000-0xbaa94000] (64MB) mapped at [ffff8800b6a94000-ffff8800baa93fff]
[    1.218401] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    1.218402] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    1.218402] RAPL PMU: hw unit of domain package 2^-16 Joules
[    1.218403] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    1.218518] Scanning for low memory corruption every 60 seconds
[    1.218749] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.219084] Initialise system trusted keyring
[    1.219186] workingset: timestamp_bits=38 max_order=21 bucket_order=0
[    1.220309] zbud: loaded
[    1.220483] Key type big_key registered
[    1.220679] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.220711] io scheduler noop registered
[    1.220713] io scheduler deadline registered
[    1.220734] io scheduler cfq registered (default)
[    1.221444] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    1.221445] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.221446] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[    1.221448] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    1.221466] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.221470] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    1.221488] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    1.221489] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.221493] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    1.221510] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    1.221513] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    1.221531] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    1.221534] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    1.221552] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    1.221555] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    1.221572] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    1.221573] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[    1.221576] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    1.221581] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.221586] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.221597] efifb: probing for efifb
[    1.221603] efifb: framebuffer at 0xd9000000, mapped to 0xffffc90001000000, using 1876k, total 1875k
[    1.221604] efifb: mode is 800x600x32, linelength=3200, pages=1
[    1.221605] efifb: scrolling: redraw
[    1.221606] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.222450] Console: switching to colour frame buffer device 100x37
[    1.223194] fb0: EFI VGA frame buffer device
[    1.223201] intel_idle: MWAIT substates: 0x1120
[    1.223202] intel_idle: v0.4.1 model 0x2A
[    1.223375] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.223394] GHES: HEST is not enabled!
[    1.223434] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.223691] Linux agpgart interface v0.103
[    1.224115] rtc_cmos 00:02: RTC can wake from S4
[    1.224228] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.224252] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.224260] Intel P-state driver initializing.
[    1.341721] ledtrig-cpu: registered to indicate activity on CPUs
[    1.342826] NET: Registered protocol family 10
[    1.343242] NET: Registered protocol family 17
[    1.343703] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x29
[    1.343744] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x29
[    1.343758] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x29
[    1.343800] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x29
[    1.343817] microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x29
[    1.343857] microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x29
[    1.343898] microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x29
[    1.343940] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x29
[    1.344039] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.344288] registered taskstats version 1
[    1.344305] Loading compiled-in X.509 certificates
[    1.344341] zswap: loaded using pool lzo/zbud
[    1.344964]   Magic number: 4:687:485
[    1.345126] rtc_cmos 00:02: setting system clock to 2016-06-17 14:28:58 UTC (1466173738)
[    1.345270] PM: Hibernation image not present or could not be loaded.
[    1.346885] Freeing unused kernel memory: 1224K (ffffffff818f5000 - ffffffff81a27000)
[    1.346888] Write protecting the kernel read-only data: 8192k
[    1.347252] Freeing unused kernel memory: 192K (ffff8800035d0000 - ffff880003600000)
[    1.348198] Freeing unused kernel memory: 252K (ffff8800037c1000 - ffff880003800000)
[    1.357616] random: systemd-tmpfile urandom read with 2 bits of entropy available
[    1.365024] nvidia: module license 'NVIDIA' taints kernel.
[    1.365029] Disabling lock debugging due to kernel taint
[    1.374886] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    1.375000] nvidia-nvlink: Nvlink Core is being initialized, major device number 248
[    1.375018] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  367.27  Thu Jun  9 18:53:27 PDT 2016
[    1.376502] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  367.27  Thu Jun  9 18:24:10 PDT 2016
[    1.378809] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 247
[    1.380765] [drm] Initialized drm 1.1.0 20060810
[    1.383499] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    1.893486] NVRM: Your system is not currently configured to drive a VGA console
[    1.893489] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[    1.893491] NVRM: requires the use of a text-mode VGA console. Use of other console
[    1.893492] NVRM: drivers including, but not limited to, vesafb, may result in
[    1.893493] NVRM: corruption and stability problems, and is not supported.
[    1.893705] nvidia-modeset: Allocated GPU:0 (GPU-c9f31b74-c958-bf5d-5b45-befcd17cc22c) @ PCI:0000:01:00.0
[    1.989944] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.989946] [drm] No driver support for vblank timestamp query.
[    2.011987] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.012402] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.012409] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.016774] ACPI: bus type USB registered
[    2.016791] usbcore: registered new interface driver usbfs
[    2.016798] usbcore: registered new interface driver hub
[    2.016830] usbcore: registered new device driver usb
[    2.017191] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.017529] ehci-pci: EHCI PCI platform driver
[    2.017633] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.017638] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.017649] ehci-pci 0000:00:1a.0: debug port 2
[    2.018166] SCSI subsystem initialized
[    2.019254] libata version 3.00 loaded.
[    2.021546] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.021568] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfba07000
[    2.028294] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.028489] hub 1-0:1.0: USB hub found
[    2.028495] hub 1-0:1.0: 2 ports detected
[    2.028655] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.028662] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.028676] ehci-pci 0000:00:1d.0: debug port 2
[    2.032592] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.032601] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfba06000
[    2.041634] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.041784] hub 2-0:1.0: USB hub found
[    2.041790] hub 2-0:1.0: 2 ports detected
[    2.041883] ahci 0000:00:1f.2: version 3.0
[    2.052091] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    2.052101] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    2.072340] scsi host0: ahci
[    2.072755] scsi host1: ahci
[    2.073150] scsi host2: ahci
[    2.073461] scsi host3: ahci
[    2.073747] scsi host4: ahci
[    2.073991] scsi host5: ahci
[    2.074107] ata1: SATA max UDMA/133 abar m2048@0xfba05000 port 0xfba05100 irq 32
[    2.074111] ata2: SATA max UDMA/133 abar m2048@0xfba05000 port 0xfba05180 irq 32
[    2.074113] ata3: DUMMY
[    2.074115] ata4: DUMMY
[    2.074118] ata5: SATA max UDMA/133 abar m2048@0xfba05000 port 0xfba05300 irq 32
[    2.074121] ata6: SATA max UDMA/133 abar m2048@0xfba05000 port 0xfba05380 irq 32
[    2.221611] tsc: Refined TSC clocksource calibration: 3392.293 MHz
[    2.221614] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5de2a436, max_idle_ns: 440795285127 ns
[    2.334932] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.348278] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.384555] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.384574] ata2: SATA link down (SStatus 0 SControl 300)
[    2.384751] ata6: SATA link down (SStatus 0 SControl 300)
[    2.384777] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.386682] ata5.00: ATAPI: hp       CDDVDW TS-H653TN, H6DA, max UDMA/100
[    2.389060] ata5.00: configured for UDMA/100
[    2.389501] ata1.00: ATA-8: WDC WD20EARS-60MVWB0, 51.0AB51, max UDMA/100
[    2.389504] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.394506] ata1.00: configured for UDMA/100
[    2.394646] scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EARS-60M AB51 PQ: 0 ANSI: 5
[    2.425853] scsi 4:0:0:0: CD-ROM            hp       CDDVDW TS-H653TN H6DA PQ: 0 ANSI: 5
[    2.439242] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    2.439245] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.439258] sd 0:0:0:0: [sda] Write Protect is off
[    2.439260] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.439265] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.450262] sr 4:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.450266] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.450482] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    2.458892] hub 1-1:1.0: USB hub found
[    2.458958] hub 1-1:1.0: 4 ports detected
[    2.472249] hub 2-1:1.0: USB hub found
[    2.472330] hub 2-1:1.0: 6 ports detected
[    2.501219]  sda: sda1 sda2 sda3 sda4
[    2.501804] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.728280] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    2.738269] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[    2.882783] usbcore: registered new interface driver usb-storage
[    2.883574] scsi host6: uas
[    2.883681] usbcore: registered new interface driver uas
[    2.884814] scsi 6:0:0:0: Direct-Access     Seagate  Expansion Desk   9401 PQ: 0 ANSI: 6
[    2.898232] usb 2-1.6: new high-speed USB device number 4 using ehci-pci
[    2.915814] sd 6:0:0:0: [sdb] 9767541167 512-byte logical blocks: (5.00 TB/4.55 TiB)
[    2.915818] sd 6:0:0:0: [sdb] 4096-byte physical blocks
[    2.917058] sd 6:0:0:0: [sdb] Write Protect is off
[    2.917062] sd 6:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[    2.917559] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.961565] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[    2.968228]  sdb: sdb1
[    2.970932] sd 6:0:0:0: [sdb] Attached SCSI disk
[    2.986639] usb-storage 2-1.6:1.0: USB Mass Storage device detected
[    2.986799] scsi host7: usb-storage 2-1.6:1.0
[    3.146205] hidraw: raw HID events driver (C) Jiri Kosina
[    3.150789] usbcore: registered new interface driver usbhid
[    3.150792] usbhid: USB HID core driver
[    3.152042] hid-generic 0003:1038:1702.0001: hiddev0,hidraw0: USB HID v1.11 Device [SteelSeries SteelSeries Rival 100 Gaming Mouse] on usb-0000:00:1a.0-1.3/input0
[    3.152202] input: SteelSeries SteelSeries Rival 100 Gaming Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:1038:1702.0002/input/input2
[    3.152248] hid-generic 0003:1038:1702.0002: input,hidraw1: USB HID v1.11 Mouse [SteelSeries SteelSeries Rival 100 Gaming Mouse] on usb-0000:00:1a.0-1.3/input1
[    3.211577] usb 1-1.4: new low-speed USB device number 5 using ehci-pci
[    3.221782] clocksource: Switched to clocksource tsc
[    3.312804] input: USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:0461:0010.0003/input/input3
[    3.364981] hid-generic 0003:0461:0010.0003: input,hidraw2: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:1a.0-1.4/input0
[    3.374861] input: USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:0461:0010.0004/input/input4
[    3.380728] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.428366] hid-generic 0003:0461:0010.0004: input,hidraw3: USB HID v1.11 Device [USB Keyboard] on usb-0000:00:1a.0-1.4/input1
[    3.989214] scsi 7:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
[    3.991287] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[    4.436155] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.415931] systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    5.416075] systemd[1]: Detected architecture x86-64.
[    5.424278] systemd[1]: Set hostname to <ArchFrancoBE>.
[    7.225344] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.225531] systemd[1]: Listening on LVM2 metadata daemon socket.
[    7.225989] systemd[1]: Created slice User and Session Slice.
[    7.226134] systemd[1]: Listening on Journal Socket.
[    7.226235] systemd[1]: Reached target Encrypted Volumes.
[    7.226357] systemd[1]: Listening on udev Control Socket.
[    7.226554] systemd[1]: Created slice System Slice.
[    7.238174] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.238424] systemd[1]: Created slice system-getty.slice.
[    7.239008] systemd[1]: Mounting POSIX Message Queue File System...
[    7.239667] systemd[1]: Mounting Huge Pages File System...
[    7.239778] systemd[1]: Reached target Slices.
[    7.240353] systemd[1]: Starting Remount Root and Kernel File Systems...
[    7.338143] systemd[1]: Mounting Configuration File System...
[    7.338796] systemd[1]: Mounting Debug File System...
[    7.339393] systemd[1]: Starting Setup Virtual Console...
[    7.340060] systemd[1]: Starting Apply Kernel Variables...
[    7.340197] systemd[1]: Listening on udev Kernel Socket.
[    7.340370] systemd[1]: Reached target Remote File Systems.
[    7.340506] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    7.343561] systemd[1]: Listening on Process Core Dump Socket.
[    7.343749] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    7.343900] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.362708] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[    7.362756] systemd[1]: Starting Journal Service...
[    7.363107] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.365098] systemd[1]: Starting Set Up Additional Binary Formats...
[    7.365907] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.366704] systemd[1]: Reached target Paths.
[    7.368812] systemd[1]: Mounted Huge Pages File System.
[    7.369632] systemd[1]: Mounted Debug File System.
[    7.370430] systemd[1]: Mounted Configuration File System.
[    7.371213] systemd[1]: Mounted POSIX Message Queue File System.
[    7.372215] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    7.373322] systemd[1]: Started Remount Root and Kernel File Systems.
[    7.375019] systemd[1]: Starting Load/Save Random Seed...
[    7.491425] systemd[1]: Starting udev Coldplug all Devices...
[    7.492601] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.493850] systemd[1]: Started Apply Kernel Variables.
[    7.494758] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 242 (systemd-binfmt)
[    7.495251] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[    7.507093] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[    7.601627] systemd[1]: Started Set Up Additional Binary Formats.
[    7.682970] systemd[1]: Started udev Coldplug all Devices.
[    8.123116] systemd[1]: Started Load/Save Random Seed.
[    8.213814] systemd[1]: Started Create Static Device Nodes in /dev.
[    8.238112] systemd[1]: Starting udev Kernel Device Manager...
[    8.238950] systemd[1]: Reached target Local File Systems (Pre).
[    8.327257] systemd[1]: Started Setup Virtual Console.
[   10.578261] systemd[1]: Started udev Kernel Device Manager.
[   11.013676] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   11.059868] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
[   11.059874] ACPI: Power Button [PWRB]
[   11.059924] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[   11.059926] ACPI: Power Button [PWRF]
[   11.168001] AVX version of gcm_enc/dec engaged.
[   11.168005] AES CTR mode by8 optimization enabled
[   12.114571] i801_smbus 0000:00:1f.3: enabling device (0101 -> 0103)
[   12.114653] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   12.171218] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.173688] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[   12.208227] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.EUSB.GPSS) (20160108/utaddress-255)
[   12.208232] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.208234] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.EUSB.GPSS) (20160108/utaddress-255)
[   12.208236] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.208237] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.EUSB.GPSS) (20160108/utaddress-255)
[   12.208240] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.208240] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   12.501810] iTCO_vendor_support: vendor-support=0
[   12.502872] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   12.502908] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   12.503029] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   12.572235] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   12.572628] r8169 0000:07:00.0 eth0: RTL8168e/8111e at 0xffffc90000cf0000, 3c:d9:2b:76:0b:49, XID 0c200000 IRQ 34
[   12.572631] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   12.732299] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[   12.749484] snd_hda_intel 0000:00:1b.0: enabling device (0100 -> 0102)
[   12.749687] snd_hda_intel 0000:01:00.1: enabling device (0100 -> 0102)
[   12.749722] snd_hda_intel 0000:01:00.1: Disabling MSI
[   12.749729] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   12.915735] mousedev: PS/2 mouse device common for all mice
[   12.988721] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC656: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   12.988726] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.988728] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   12.988730] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   12.988731] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   12.988734] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   12.988735] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   12.988737] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   12.992940] i915 0000:00:02.0: enabling device (0006 -> 0007)
[   12.993599] [drm] Memory usable by graphics device = 2048M
[   12.993603] checking generic (d9000000 1d5000) vs hw (c0000000 10000000)
[   12.993604] [drm] Replacing VGA console driver
[   12.998765] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   12.998822] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.998872] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   12.998922] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   12.998971] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   12.999823] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   12.999826] [drm] Driver supports precise vblank timestamp query.
[   13.004948] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 1
[   13.043380] systemd[1]: Reached target Sound Card.
[   13.055669] usbcore: registered new interface driver steamos-xpad
[   13.080183] intel_rapl: Found RAPL domain package
[   13.080189] intel_rapl: Found RAPL domain core
[   13.080192] intel_rapl: Found RAPL domain uncore
[   13.080199] intel_rapl: RAPL package 0 domain package locked by BIOS
[   13.121795] i915 0000:00:02.0: No connectors reported connected with modes
[   13.121803] [drm] Cannot find any crtc or sizes - going 1024x768
[   13.122413] checking generic (d9000000 1d5000) vs hw (c0000000 10000000)
[   13.122493] i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
[   13.219192] r8169 0000:07:00.0 eno1: renamed from eth0
[   13.517956] systemd[1]: Found device WDC_WD20EARS-60MVWB0 BOOT.
[   13.704980] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[   13.705067] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[   13.705154] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[   13.705266] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[   13.743737] rt2800pci 0000:03:00.0: enabling device (0100 -> 0102)
[   13.743868] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[   13.747449] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5390 detected
[   13.791121] systemd[1]: Mounting /boot...
[   13.793638] systemd[1]: Found device WDC_WD20EARS-60MVWB0 SWAP.
[   13.794567] systemd[1]: Found device WDC_WD20EARS-60MVWB0 SWAP.
[   13.796399] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.796801] systemd[1]: Activating swap Swap Partition...
[   13.798448] systemd[1]: Starting Load/Save RF Kill Switch Status...
[   13.857525] rt2800pci 0000:03:00.0 wlp3s0: renamed from wlan0
[   14.151898] systemd[1]: Started Load/Save RF Kill Switch Status.
[   14.300170] Adding 6122492k swap on /dev/sda2.  Priority:-1 extents:1 across:6122492k FS
[   14.302809] systemd[1]: Activated swap Swap Partition.
[   14.303757] systemd[1]: Activated swap /dev/disk/by-label/SWAP.
[   14.304886] systemd[1]: Reached target Swap.
[   14.362371] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   14.451019] systemd[1]: Mounting Temporary Directory...
[   14.452592] systemd[1]: Mounted Temporary Directory.
[   14.453036] systemd[1]: Mounted /boot.
[   14.453598] systemd[1]: Reached target Local File Systems.
[   16.439324] systemd[1]: Started Journal Service.
[   16.786723] systemd-journald[237]: Received request to flush runtime journal from PID 1
[   19.394230] random: nonblocking pool is initialized
[   22.398205] /dev/vmmon[414]: Module vmmon: registered with major=10 minor=165
[   22.398211] /dev/vmmon[414]: Using tsc_khz as TSC frequency: 3392293
[   22.398213] /dev/vmmon[414]: Module vmmon: initialized
[   22.785953] Guest personality initialized and is inactive
[   22.786017] VMCI host device registered (name=vmci, major=10, minor=57)
[   22.786019] Initialized host personality
[   23.433569] NET: Registered protocol family 40
[   23.822942] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   23.822994] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
[   23.838422] fuse init (API version 7.24)
[   23.843371] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.40
[   23.954508] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   23.958210] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   24.511039] r8169 0000:07:00.0 eno1: link down
[   24.511055] r8169 0000:07:00.0 eno1: link down
[   24.511088] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   26.137362] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   26.170330] r8169 0000:07:00.0 eno1: link up
[   26.170340] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[   26.666620] ppdev: user-space parallel port driver
[   27.665674] /dev/vmnet: open called by PID 608 (vmnet-bridge)
[   27.665685] /dev/vmnet: hub 0 does not exist, allocating memory.
[   27.665705] /dev/vmnet: port on hub 0 successfully opened
[   27.665715] bridge-eno1: up
[   27.665720] bridge-eno1: attached
[   29.373319] /dev/vmnet: open called by PID 632 (vmnet-netifup)
[   29.373330] /dev/vmnet: hub 1 does not exist, allocating memory.
[   29.373349] /dev/vmnet: port on hub 1 successfully opened
[   30.106147] /dev/vmnet: open called by PID 642 (vmnet-dhcpd)
[   30.106156] /dev/vmnet: port on hub 1 successfully opened
[   30.355339] /dev/vmnet: open called by PID 651 (vmnet-natd)
[   30.355341] /dev/vmnet: hub 8 does not exist, allocating memory.
[   30.355350] /dev/vmnet: port on hub 8 successfully opened
[   30.384401] userif-3: sent link down event.
[   30.384402] userif-3: sent link up event.
[   30.385091] /dev/vmnet: open called by PID 652 (vmnet-netifup)
[   30.385095] /dev/vmnet: port on hub 8 successfully opened
[   30.514779] /dev/vmnet: open called by PID 656 (vmnet-dhcpd)
[   30.514786] /dev/vmnet: port on hub 8 successfully opened
[   61.402440] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)

Offline

#8 2016-06-17 15:06:16

Omar007
Member
Registered: 2015-04-09
Posts: 368

Re: PCI passthrough with an unsupported GPU

Ah wait that chipset may not support VT-d afaik.

EDIT: http://ark.intel.com/products/52806/Intel-BD82H61-PCH
"Intel® Virtualization Technology for Directed I/O (VT-d) ‡:     No"
Seems it may depend on the vendor whether it really isn't though.

Last edited by Omar007 (2016-06-17 15:08:06)

Offline

#9 2016-06-17 15:26:48

Slithery
Administrator
From: Norfolk, UK
Registered: 2013-12-01
Posts: 5,334

Re: PCI passthrough with an unsupported GPU

That motherboard definitely doesn't support VT-d.

The disclaimer on the Intel site is because even if a chipset does support VT-d the manufacturer also has to build support into the motherboard.


No, it didn't "fix" anything. It just shifted the brokeness one space to the right. - jasonwryan
Closing -- for deletion; Banning -- for muppetry. - jasonwryan

aur - dotfiles

Offline

#10 2016-06-17 17:02:26

frank0393
Member
Registered: 2016-02-23
Posts: 6

Re: PCI passthrough with an unsupported GPU

I see... that's a shame.
Thank you anyways.

Offline

Board footer

Powered by FluxBB