You are not logged in.

#1 2018-01-19 19:58:15

vladb.
Member
Registered: 2018-01-19
Posts: 2

Cannot enable Bluetooth

Hello everyone! I haven't been able to enable Bluetooth in a while. gnome-bluetooth just tells me that bluetooth is off regardless of if I select to turn on/off and I cannot access the setting since it's off. Blueman also reports that it is off, and give errors like 'Device not ready'. I have checked and it is not rfkill blocked.

Using `bluetoothctl`:

[NEW] Controller 9C:B6:D0:E2:96:0C arch [default]
[NEW] Device 88:C6:26:AB:93:D0 Vlad BOOM 2
Agent registered
[bluetooth]# default-agent
Default agent request successful
[bluetooth]# power on
Failed to set power on: org.bluez.Error.Failed
[bluetooth]# scan on
Failed to start discovery: org.bluez.Error.NotReady

Also `systemctl status bluetooth`:

   Loaded: loaded (/usr/lib/systemd/system/bluetooth.service; disabled; vendor preset: disabled)
   Active: active (running) since Fri 2018-01-19 19:18:50 GMT; 13min ago
     Docs: man:bluetoothd(8)
 Main PID: 3193 (bluetoothd)
   Status: "Running"
    Tasks: 1 (limit: 4915)
   CGroup: /system.slice/bluetooth.service
           └─3193 /usr/lib/bluetooth/bluetoothd

Jan 19 19:18:50 arch bluetoothd[3193]: Endpoint registered: sender=:1.108 path=/MediaEndpoint/A2DPSink
Jan 19 19:18:50 arch bluetoothd[3193]: Endpoint registered: sender=:1.132 path=/MediaEndpoint/A2DPSource
Jan 19 19:18:50 arch bluetoothd[3193]: Endpoint registered: sender=:1.132 path=/MediaEndpoint/A2DPSink
Jan 19 19:18:50 arch bluetoothd[3193]: RFCOMM server failed for Headset Voice gateway: rfcomm_bind: Address already in use (98)
Jan 19 19:18:50 arch bluetoothd[3193]: RFCOMM server failed for :1.132/Profile/HSPHSProfile/00001108-0000-1000-8000-00805f9b34fb: rfcomm_bind: 
Jan 19 19:19:01 arch bluetoothd[3193]: Failed to set mode: Failed (0x03)
Jan 19 19:19:11 arch bluetoothd[3193]: Failed to set mode: Failed (0x03)
Jan 19 19:19:21 arch bluetoothd[3193]: Failed to set mode: Failed (0x03)
Jan 19 19:19:31 arch bluetoothd[3193]: Failed to set mode: Failed (0x03)
Jan 19 19:19:42 arch bluetoothd[3193]: Failed to set mode: Failed (0x03)

Restarting or disconnecting devices did not help. This issue has persistet for a few weeks and it used to work before. I assume it must have been a system update. Any help would be appreciated. Many thanks!

Offline

#2 2018-01-19 22:13:18

robg
Member
Registered: 2015-03-05
Posts: 218

Re: Cannot enable Bluetooth

Hello vldab and welcome to Arch!

As indicated here, you might need to unblock your bluetooth adapter. Could you please post the output of `rfkill list`? And, just to get the whole picture, you might also want to add the outputs of `lspci` and `dmesg` (the latter best after a reboot and after trying the `power on` command in bluetoothctl).

Last edited by robg (2018-01-19 22:15:11)

Offline

#3 2018-01-20 10:04:32

vladb.
Member
Registered: 2018-01-19
Posts: 2

Re: Cannot enable Bluetooth

As mentioned above, it is not rfkill blocked:

0: hci0: Bluetooth
	Soft blocked: no
	Hard blocked: no
1: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no

Here's the `lspci` output:

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 05)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) (rev 05)
00:02.0 VGA compatible controller: Intel Corporation Device 591b (rev 04)
00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 05)
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31)
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO I2C Controller #0 (rev 31)
00:15.1 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO I2C Controller #1 (rev 31)
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #1 (rev f1)
00:1c.1 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #2 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #9 (rev f1)
00:1d.4 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #13 (rev f1)
00:1d.6 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #15 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
00:1f.3 Audio device: Intel Corporation CM238 HD Audio Controller (rev 31)
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
01:00.0 3D controller: NVIDIA Corporation GP107M [GeForce GTX 1050 Mobile] (rev ff)
02:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader (rev 01)
04:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961

And here is some output from dmesg, after trying to power on.
It looks like the same sequence was attempted at least 4 times after boot.

[    1.539973] Bluetooth: Core ver 2.22
[    1.539984] NET: Registered protocol family 31
[    1.539985] Bluetooth: HCI device and connection manager initialized
[    1.539987] Bluetooth: HCI socket layer initialized
[    1.539988] Bluetooth: L2CAP socket layer initialized
[    1.539991] Bluetooth: SCO socket layer initialized
[    1.548440] AVX2 version of gcm_enc/dec engaged.
[    1.548441] AES CTR mode by8 optimization enabled
[    1.560163] Bluetooth: HCI UART driver ver 2.3
[    1.560164] Bluetooth: HCI UART protocol H4 registered
[    1.560165] Bluetooth: HCI UART protocol BCSP registered
[    1.560176] Bluetooth: HCI UART protocol LL registered
[    1.560177] Bluetooth: HCI UART protocol ATH3K registered
[    1.560177] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    1.560202] Bluetooth: HCI UART protocol Intel registered
[    1.560220] Bluetooth: HCI UART protocol Broadcom registered
[    1.560220] Bluetooth: HCI UART protocol QCA registered
[    1.560221] Bluetooth: HCI UART protocol AG6XX registered
[    1.560221] Bluetooth: HCI UART protocol Marvell registered
[    1.594946] ACPI: Battery Slot [BAT0] (battery present)
[    1.600188] clocksource: Switched to clocksource tsc
[    1.613426] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[    1.614907] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    1.627605] intel_rapl: Found RAPL domain package
[    1.627607] intel_rapl: Found RAPL domain core
[    1.627608] intel_rapl: Found RAPL domain uncore
[    1.627608] intel_rapl: Found RAPL domain dram
[    1.653350] usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
[    2.104625] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    2.107674] bbswitch: loading out-of-tree module taints kernel.
[    2.111187] bbswitch: version 0.8
[    2.111197] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    2.111888] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[    2.111912] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170728/nsarguments-100)
[    2.112046] bbswitch: detected an Optimus _DSM function
[    2.112053] pci 0000:01:00.0: enabling device (0006 -> 0007)
[    2.114906] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[    2.116029] dell-wmi 9DBB5994-A997-11DA-B012-B622A1EF5492: Detected Dell WMI interface version 1
[    2.116091] input: Dell WMI hotkeys as /devices/platform/PNP0C14:03/wmi_bus/wmi_bus-PNP0C14:03/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input9
[    2.116342] bbswitch: disabling discrete graphics
[    2.126027] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    2.126266] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    2.143654] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.143656] Bluetooth: BNEP filters: protocol multicast
[    2.143659] Bluetooth: BNEP socket layer initialized
[    2.152574] random: crng init done
[    2.213552] usb 2-2.4: new SuperSpeed USB device number 3 using xhci_hcd
[    2.231621] hub 2-2.4:1.0: USB hub found
[    2.231916] hub 2-2.4:1.0: 2 ports detected
[    2.282296] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2
[    2.282315] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2
[    2.284115] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[    2.284120] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[    2.285424] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4.1-00051-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 c3fd4411
[    2.350654] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 0e26ef70
[    2.353348] psmouse serio1: synaptics: Unable to query device: -1
[    2.353358] usb 1-12: new high-speed USB device number 5 using xhci_hcd
[    2.490395] input: PC Speaker as /devices/platform/pcspkr/input/input10
[    2.558741] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    2.561123] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    2.561165] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    2.565479] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    2.566360] iTCO_vendor_support: vendor-support=0
[    2.566988] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.567187] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    2.567325] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.569251] input: DLL07BE:01 06CB:7A13 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL07BE:01/0018:06CB:7A13.0001/input/input12
[    2.569288] hid-multitouch 0018:06CB:7A13.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL07BE:01 06CB:7A13] on i2c-DLL07BE:01
[    2.571903] mousedev: PS/2 mouse device common for all mice
[    2.581017] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    2.583404] [drm] Memory usable by graphics device = 4096M
[    2.583407] checking generic (80000000 7f0000) vs hw (80000000 10000000)
[    2.583407] fb: switching to inteldrmfb from EFI VGA
[    2.583434] Console: switching to colour dummy device 80x25
[    2.583507] [drm] Replacing VGA console driver
[    2.588725] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.588726] [drm] Driver supports precise vblank timestamp query.
[    2.590126] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.593604] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[    2.596010] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    2.597564] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[    2.601597] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.602745] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17
[    2.603003] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    2.603035] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input18
[    2.603173] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.626679] usb 1-2.2: new full-speed USB device number 6 using xhci_hcd
[    2.676939] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3266: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    2.676941] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.676943] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    2.676943] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    2.676944] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    2.676946] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x18
[    2.676947] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1a
[    2.676948] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    2.734386] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    2.734431] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    2.734472] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    2.734514] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    2.734554] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[    2.734590] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[    2.793354] usb 1-2.4: new high-speed USB device number 7 using xhci_hcd
[    2.884218] hub 1-2.4:1.0: USB hub found
[    2.884232] hub 1-2.4:1.0: 2 ports detected
[    2.934678] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[    2.937585] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[    2.938255] ath10k_pci 0000:02:00.0: htt-ver 3.44 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[    2.976141] fbcon: inteldrmfb (fb0) is primary device
[    2.976186] Console: switching to colour frame buffer device 240x67
[    2.976190] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.019710] ath: EEPROM regdomain: 0x6c
[    3.019711] ath: EEPROM indicates we should expect a direct regpair map
[    3.019712] ath: Country alpha2 being used: 00
[    3.019712] ath: Regpair used: 0x6c
[    3.494516] [drm] RC6 on
[    3.632930] usbcore: registered new interface driver btusb
[    3.646207] media: Linux media interface: v0.10
[    3.657829] Linux video capture interface: v2.00
[    3.667615] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6713)
[    3.694102] uvcvideo 1-12:1.0: Entity type for entity Extension 4 was not initialized!
[    3.694104] uvcvideo 1-12:1.0: Entity type for entity Extension 3 was not initialized!
[    3.694105] uvcvideo 1-12:1.0: Entity type for entity Processing 2 was not initialized!
[    3.694107] uvcvideo 1-12:1.0: Entity type for entity Camera 1 was not initialized!
[    3.694208] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input25
[    3.694307] usbcore: registered new interface driver uvcvideo
[    3.694307] USB Video Class driver (1.1.1)
[    3.740744] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[    3.743654] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[    3.794498] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    3.799389] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    4.158105] usbcore: registered new interface driver usbhid
[    4.158107] usbhid: USB HID core driver
[    4.160018] input: Logitech Gaming Keyboard G610 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:046D:C333.0002/input/input26
[    4.216941] hid-generic 0003:046D:C333.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Keyboard G610] on usb-0000:00:14.0-2.1/input0
[    4.217069] input: Logitech Gaming Keyboard G610 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:046D:C333.0003/input/input27
[    4.273629] hid-generic 0003:046D:C333.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [Logitech Gaming Keyboard G610] on usb-0000:00:14.0-2.1/input1
[    4.273721] input: Xornet gaming mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:2516:0003.0004/input/input28
[    4.273842] hid-generic 0003:2516:0003.0004: input,hiddev1,hidraw3: USB HID v1.11 Mouse [Xornet gaming mouse] on usb-0000:00:14.0-2.2/input0
[    4.593593] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[    4.596502] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[    4.647408] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    4.657001] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    5.438722] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    6.051170] Bluetooth: RFCOMM TTY layer initialized
[    6.051177] Bluetooth: RFCOMM socket layer initialized
[    6.051184] Bluetooth: RFCOMM ver 1.11
[    8.050216] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[    8.253364] psmouse serio1: Failed to enable mouse on isa0060/serio1
[   10.331843] wlan0: authenticate with 40:18:b1:8b:c8:e8
[   10.370286] wlan0: send auth to 40:18:b1:8b:c8:e8 (try 1/3)
[   10.371171] wlan0: authenticated
[   10.373425] wlan0: associate with 40:18:b1:8b:c8:e8 (try 1/3)
[   10.375608] wlan0: RX AssocResp from 40:18:b1:8b:c8:e8 (capab=0x411 status=0 aid=3)
[   10.378330] wlan0: associated
[   10.418970] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 40:18:b1:8b:c8:e8
[   10.569765] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0
[   10.569773] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e0(Transmitter ID)
[   10.569775] pcieport 0000:00:1c.0:   device [8086:a110] error status/mask=00001000/00002000
[   10.569777] pcieport 0000:00:1c.0:    [12] Replay Timer Timeout  
[   10.570493] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   12.796824] fuse init (API version 7.26)
[   13.068374] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[   15.012111] rfkill: input handler disabled
[   30.980398] pcieport 0000:00:1d.0: AER: Corrected error received: id=00e8
[   30.980405] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e8(Transmitter ID)
[   30.980407] pcieport 0000:00:1d.0:   device [8086:a118] error status/mask=00001000/00002000
[   30.980409] pcieport 0000:00:1d.0:    [12] Replay Timer Timeout  
[   35.436381] pcieport 0000:00:1d.0: AER: Corrected error received: id=00e8
[   35.436385] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e8(Transmitter ID)
[   35.436388] pcieport 0000:00:1d.0:   device [8086:a118] error status/mask=00001000/00002000
[   35.436389] pcieport 0000:00:1d.0:    [12] Replay Timer Timeout  
[   40.663900] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[   43.393495] Bluetooth: hci0 urb ffff9a929eb02f00 failed to resubmit (113)
[   53.420170] Bluetooth: hci0 urb ffff9a929eb02000 failed to resubmit (113)
[   63.446951] Bluetooth: hci0 urb ffff9a929e978c00 failed to resubmit (113)
[   83.791078] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0
[   83.791085] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e0(Transmitter ID)
[   83.791088] pcieport 0000:00:1c.0:   device [8086:a110] error status/mask=00001000/00002000
[   83.791090] pcieport 0000:00:1c.0:    [12] Replay Timer Timeout  
[   86.526520] pcieport 0000:00:1d.0: AER: Corrected error received: id=00e8
[   86.526526] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e8(Transmitter ID)
[   86.526529] pcieport 0000:00:1d.0:   device [8086:a118] error status/mask=00001000/00002000
[   86.526531] pcieport 0000:00:1d.0:    [12] Replay Timer Timeout  
[  102.130075] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0
[  102.130089] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e0(Transmitter ID)
[  102.130097] pcieport 0000:00:1c.0:   device [8086:a110] error status/mask=00001000/00002000
[  102.130103] pcieport 0000:00:1c.0:    [12] Replay Timer Timeout  

Hope this helps. Thanks!

Offline

#4 2018-01-20 13:32:44

robg
Member
Registered: 2015-03-05
Posts: 218

Re: Cannot enable Bluetooth

vladb. wrote:

As mentioned above, it is not rfkill blocked:

Apologies, apparently I have missed that. You might give hciconfig (bluez-utils) a try. Identify your bluetooth device and have a look at

man hciconfig wrote:

up
    Open and initialize HCI device.
down
    Close HCI device.

Offline

#5 2018-01-25 22:30:04

syre
Member
From: Denmark
Registered: 2009-08-04
Posts: 100

Re: Cannot enable Bluetooth

I have exactly the same problem, with similar dmesg output and systemctl status:

[    0.000000] microcode: microcode updated early to revision 0x80, date = 2018-01-04
[    0.000000] Linux version 4.14.15-1-ARCH (builduser@heftig) (gcc version 7.2.1 20180116 (GCC)) #1 SMP PREEMPT Tue Jan 23 21:49:25 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/AntergosVG-AntergosRoot rw cryptdevice=/dev/disk/by-uuid/69436886-6456-4b40-98e3-54017c5bc57b:cryptAntergos quiet resume=UUID=249066c4-fa39-4ee7-8e72-8f385ab509e3
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000074454fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000074455000-0x0000000074455fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000074456000-0x0000000074456fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000074457000-0x000000007a4c4fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a4c5000-0x000000007a84ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007a850000-0x000000007a893fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007a894000-0x000000007aefcfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007aefd000-0x000000007b51ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007b520000-0x000000007b5fefff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007b5ff000-0x000000007b5fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b600000-0x000000007f7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047e7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi:  ACPI=0x7a85d000  ACPI 2.0=0x7a85d000  SMBIOS=0x7b330000  SMBIOS 3.0=0x7b32f000  ESRT=0x7b29f118  MPS=0xfcbb0  MEMATTR=0x77de1018 
[    0.000000] random: fast init done
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Dell Inc. XPS 13 9360/0PF86Y, BIOS 2.3.1 10/03/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x47e800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000000]   1 base 007E000000 mask 7FFE000000 uncachable
[    0.000000]   2 base 007D000000 mask 7FFF000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x7b600 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fce20-0x000fce2f] mapped at [ffffffffff240e20]
[    0.000000] esrt: Reserving ESRT space from 0x000000007b29f118 to 0x000000007b29f150.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff9b7700097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x12562d000, 0x12562dfff] PGTABLE
[    0.000000] BRK [0x12562e000, 0x12562efff] PGTABLE
[    0.000000] BRK [0x12562f000, 0x12562ffff] PGTABLE
[    0.000000] BRK [0x125630000, 0x125630fff] PGTABLE
[    0.000000] BRK [0x125631000, 0x125631fff] PGTABLE
[    0.000000] BRK [0x125632000, 0x125632fff] PGTABLE
[    0.000000] BRK [0x125633000, 0x125633fff] PGTABLE
[    0.000000] BRK [0x125634000, 0x125634fff] PGTABLE
[    0.000000] BRK [0x125635000, 0x125635fff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x35f31000-0x36f8ffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007A85D000 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x000000007A85D0C0 0000FC (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007A8827C0 00010C (v05 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007A85D248 025576 (v02 DELL   CBX3     01072009 INTL 20160422)
[    0.000000] ACPI: FACS 0x000000007AEFA180 000040
[    0.000000] ACPI: APIC 0x000000007A8828D0 000084 (v03 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000007A882958 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000007A8829A0 0000AC (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000007A882A50 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000007A882A90 000038 (v01 DELL   CBX3     01072009 AMI. 0005000B)
[    0.000000] ACPI: SSDT 0x000000007A882AC8 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[    0.000000] ACPI: BOOT 0x000000007A882E28 000028 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000007A882E50 0012CF (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.000000] ACPI: HPET 0x000000007A884120 000038 (v01 INTEL  KBL-ULT  00000001 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000007A884158 000D84 (v02 INTEL  xh_rvp07 00000000 INTL 20160422)
[    0.000000] ACPI: UEFI 0x000000007A884EE0 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: SSDT 0x000000007A884F28 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.000000] ACPI: LPIT 0x000000007A885E08 000094 (v01 INTEL  KBL-ULT  00000000 MSFT 0000005F)
[    0.000000] ACPI: WSMT 0x000000007A885EA0 000028 (v01 DELL   CBX3     00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000007A885EC8 000161 (v02 INTEL  HdaDsp   00000000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000007A886030 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000007A8862D0 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000007A8892D8 0000DB (v02 INTEL  TbtTypeC 00000000 INTL 20160422)
[    0.000000] ACPI: DBGP 0x000000007A8893B8 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x000000007A8893F0 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000007A889448 0007AC (v02 INTEL  UsbCTabl 00001000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000007A889BF8 0084F1 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[    0.000000] ACPI: NHLT 0x000000007A8920F0 00002D (v00 INTEL  EDK2     00000002      01000013)
[    0.000000] ACPI: BGRT 0x000000007A892120 000038 (v00 \xf3\xee              01072009 AMI  00010013)
[    0.000000] ACPI: ASF! 0x000000007A892158 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.000000] ACPI: DMAR 0x000000007A8921F8 0000F0 (v01 INTEL  KBL      00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000047e7fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x47e7fc000-0x47e7fffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000047e7fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000074454fff]
[    0.000000]   node   0: [mem 0x0000000074457000-0x000000007a4c4fff]
[    0.000000]   node   0: [mem 0x000000007b5ff000-0x000000007b5fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000047e7fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047e7fffff]
[    0.000000] On node 0 totalpages: 4164705
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 25 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7764 pages used for memmap
[    0.000000]   DMA32 zone: 496836 pages, LIFO batch:31
[    0.000000]   Normal zone: 57248 pages used for memmap
[    0.000000]   Normal zone: 3663872 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000007d800000-0x000000007f7fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x74455000-0x74455fff]
[    0.000000] PM: Registered nosave memory: [mem 0x74456000-0x74456fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a4c5000-0x7a84ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a850000-0x7a893fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a894000-0x7aefcfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7aefd000-0x7b51ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b520000-0x7b5fefff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b600000-0x7f7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f800000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x7f800000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 42 pages/cpu @ffff9b7b7e400000 s134168 r8192 d29672 u524288
[    0.000000] pcpu-alloc: s134168 r8192 d29672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4099604
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/AntergosVG-AntergosRoot rw cryptdevice=/dev/disk/by-uuid/69436886-6456-4b40-98e3-54017c5bc57b:cryptAntergos quiet resume=UUID=249066c4-fa39-4ee7-8e72-8f385ab509e3
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16246304K/16658820K available (10252K kernel code, 1157K rwdata, 2792K rodata, 1360K init, 992K bss, 412516K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 29122 entries in 114 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 8448, nr_irqs: 1024, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.003333] tsc: Detected 2400.000 MHz processor
[    0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4801.00 BogoMIPS (lpj=8000000)
[    0.003333] pid_max: default: 32768 minimum: 301
[    0.003333] ACPI: Core revision 20170728
[    0.043090] ACPI: 11 ACPI AML tables successfully acquired and loaded
[    0.043971] Security Framework initialized
[    0.043972] Yama: becoming mindful.
[    0.045879] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.046849] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.046884] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.046913] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.047086] CPU: Physical Processor ID: 0
[    0.047087] CPU: Processor Core ID: 0
[    0.047092] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.047092] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.047103] mce: CPU supports 9 MCE banks
[    0.047112] CPU0: Thermal monitoring enabled (TM1)
[    0.047130] process: using mwait in idle threads
[    0.047133] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.047133] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.047135] Spectre V2 mitigation: Mitigation: Full generic retpoline
[    0.047135] Spectre V2 mitigation: Filling RSB on context switch
[    0.047806] Freeing SMP alternatives memory: 24K
[    0.050096] smpboot: Max logical packages: 2
[    0.050101] DMAR: Host address width 39
[    0.050102] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.050108] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.050109] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.050113] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.050114] DMAR: RMRR base: 0x0000007a593000 end: 0x0000007a5b2fff
[    0.050115] DMAR: RMRR base: 0x0000007d000000 end: 0x0000007f7fffff
[    0.050116] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.050117] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.050118] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.050119] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.050120] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.051555] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.051556] x2apic enabled
[    0.051566] Switched APIC routing to cluster x2apic.
[    0.055557] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.088601] TSC deadline timer enabled
[    0.088606] smpboot: CPU0: Intel(R) Core(TM) i7-7560U CPU @ 2.40GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[    0.100043] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.100074] ... version:                4
[    0.100075] ... bit width:              48
[    0.100075] ... generic registers:      4
[    0.100076] ... value mask:             0000ffffffffffff
[    0.100076] ... max period:             00007fffffffffff
[    0.100077] ... fixed-purpose events:   3
[    0.100077] ... event mask:             000000070000000f
[    0.106680] Hierarchical SRCU implementation.
[    0.120152] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.126678] smp: Bringing up secondary CPUs ...
[    0.153384] x86: Booting SMP configuration:
[    0.153386] .... node  #0, CPUs:      #1 #2 #3
[    0.208497] smp: Brought up 1 node, 4 CPUs
[    0.208497] smpboot: Total of 4 processors activated (19207.00 BogoMIPS)
[    0.210379] devtmpfs: initialized
[    0.210379] x86/mm: Memory block size: 128MB
[    0.211059] PM: Registering ACPI NVS region [mem 0x74455000-0x74455fff] (4096 bytes)
[    0.211059] PM: Registering ACPI NVS region [mem 0x7a894000-0x7aefcfff] (6721536 bytes)
[    0.211059] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.211059] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.211059] pinctrl core: initialized pinctrl subsystem
[    0.211059] RTC time: 22:13:58, date: 01/25/18
[    0.211059] NET: Registered protocol family 16
[    0.211059] cpuidle: using governor ladder
[    0.216708] cpuidle: using governor menu
[    0.216715] Simple Boot Flag at 0x47 set to 0x80
[    0.216736] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.216737] ACPI: bus type PCI registered
[    0.216738] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.216794] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.216796] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.216806] PCI: Using configuration type 1 for base access
[    0.223372] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.223372] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.223387] ACPI: Added _OSI(Module Device)
[    0.223388] ACPI: Added _OSI(Processor Device)
[    0.223389] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.223390] ACPI: Added _OSI(Processor Aggregator Device)
[    0.224478] ACPI: Executed 34 blocks of module-level executable AML code
[    0.240337] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.246567] ACPI: Dynamic OEM Table Load:
[    0.246574] ACPI: SSDT 0xFFFF9B7B6BB29800 000651 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.246821] ACPI: Executed 1 blocks of module-level executable AML code
[    0.246898] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.247898] ACPI: Dynamic OEM Table Load:
[    0.247903] ACPI: SSDT 0xFFFF9B7B6B5D1C00 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.248129] ACPI: Executed 1 blocks of module-level executable AML code
[    0.248571] ACPI: Dynamic OEM Table Load:
[    0.248576] ACPI: SSDT 0xFFFF9B7B6BB2F800 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.249024] ACPI: Executed 1 blocks of module-level executable AML code
[    0.249238] ACPI: Dynamic OEM Table Load:
[    0.249242] ACPI: SSDT 0xFFFF9B7B6B4CB200 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.249467] ACPI: Executed 1 blocks of module-level executable AML code
[    0.250904] ACPI: EC: EC started
[    0.250905] ACPI: EC: interrupt blocked
[    0.253237] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[    0.253237] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.253237] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
[    0.253237] ACPI: Interpreter enabled
[    0.253237] ACPI: (supports S0 S3 S4 S5)
[    0.253237] ACPI: Using IOAPIC for interrupt routing
[    0.253237] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.253242] ACPI: Enabled 8 GPEs in block 00 to 7F
[    0.257745] ACPI: Power Resource [WRST] (on)
[    0.258096] ACPI: Power Resource [WRST] (on)
[    0.258443] ACPI: Power Resource [WRST] (on)
[    0.258793] ACPI: Power Resource [WRST] (on)
[    0.259145] ACPI: Power Resource [WRST] (on)
[    0.259490] ACPI: Power Resource [WRST] (on)
[    0.260028] ACPI: Power Resource [WRST] (on)
[    0.260374] ACPI: Power Resource [WRST] (on)
[    0.260716] ACPI: Power Resource [WRST] (on)
[    0.261202] ACPI: Power Resource [WRST] (on)
[    0.261548] ACPI: Power Resource [WRST] (on)
[    0.261890] ACPI: Power Resource [WRST] (on)
[    0.262239] ACPI: Power Resource [WRST] (on)
[    0.262590] ACPI: Power Resource [WRST] (on)
[    0.262936] ACPI: Power Resource [WRST] (on)
[    0.263280] ACPI: Power Resource [WRST] (on)
[    0.263628] ACPI: Power Resource [WRST] (on)
[    0.264945] ACPI: Power Resource [WRST] (on)
[    0.265289] ACPI: Power Resource [WRST] (on)
[    0.265631] ACPI: Power Resource [WRST] (on)
[    0.286198] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.286203] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.286538] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.286856] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.286857] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.287567] PCI host bridge to bus 0000:00
[    0.287569] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.287571] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.287572] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.287574] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xdfffffff window]
[    0.287575] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.287576] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.287585] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[    0.287701] pci 0000:00:02.0: [8086:5926] type 00 class 0x030000
[    0.287713] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
[    0.287719] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[    0.287723] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.287736] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.287856] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.287868] pci 0000:00:04.0: reg 0x10: [mem 0xdc420000-0xdc427fff 64bit]
[    0.288068] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.288090] pci 0000:00:14.0: reg 0x10: [mem 0xdc410000-0xdc41ffff 64bit]
[    0.288161] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.288354] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.288378] pci 0000:00:14.2: reg 0x10: [mem 0xdc434000-0xdc434fff 64bit]
[    0.288626] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[    0.288889] pci 0000:00:15.0: reg 0x10: [mem 0xdc433000-0xdc433fff 64bit]
[    0.289849] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[    0.293430] pci 0000:00:15.1: reg 0x10: [mem 0xdc432000-0xdc432fff 64bit]
[    0.294302] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.294323] pci 0000:00:16.0: reg 0x10: [mem 0xdc431000-0xdc431fff 64bit]
[    0.294394] pci 0000:00:16.0: PME# supported from D3hot
[    0.294574] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.294650] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.294814] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[    0.294887] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.295038] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[    0.295110] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.295267] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[    0.295346] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.295531] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[    0.295764] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.295779] pci 0000:00:1f.2: reg 0x10: [mem 0xdc42c000-0xdc42ffff]
[    0.295937] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380
[    0.295964] pci 0000:00:1f.3: reg 0x10: [mem 0xdc428000-0xdc42bfff 64bit]
[    0.295991] pci 0000:00:1f.3: reg 0x20: [mem 0xdc400000-0xdc40ffff 64bit]
[    0.296040] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.296259] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.296320] pci 0000:00:1f.4: reg 0x10: [mem 0xdc430000-0xdc4300ff 64bit]
[    0.296391] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.296672] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[    0.296677] pci 0000:00:1c.0:   bridge window [mem 0xc4000000-0xda0fffff]
[    0.296682] pci 0000:00:1c.0:   bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[    0.297022] pci 0000:3a:00.0: [168c:003e] type 00 class 0x028000
[    0.297351] pci 0000:3a:00.0: reg 0x10: [mem 0xdc000000-0xdc1fffff 64bit]
[    0.298535] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold
[    0.303623] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[    0.303627] pci 0000:00:1c.4:   bridge window [mem 0xdc000000-0xdc1fffff]
[    0.303730] pci 0000:3b:00.0: [10ec:525a] type 00 class 0xff0000
[    0.303761] pci 0000:3b:00.0: reg 0x14: [mem 0xdc300000-0xdc300fff]
[    0.303864] pci 0000:3b:00.0: supports D1 D2
[    0.303866] pci 0000:3b:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.316728] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[    0.316732] pci 0000:00:1c.5:   bridge window [mem 0xdc300000-0xdc3fffff]
[    0.317106] pci 0000:3c:00.0: [1179:0115] type 00 class 0x010802
[    0.317133] pci 0000:3c:00.0: reg 0x10: [mem 0xdc200000-0xdc203fff 64bit]
[    0.317178] pci 0000:3c:00.0: enabling Extended Tags
[    0.330323] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[    0.330327] pci 0000:00:1d.0:   bridge window [mem 0xdc200000-0xdc2fffff]
[    0.332932] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.332981] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.333028] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.333076] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.333122] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.333169] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.333216] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.333263] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.333345] ACPI: \_SB_.PEPD: Low Power S0 Idle interface disabled
[    0.340002] ACPI: EC: interrupt unblocked
[    0.340002] ACPI: EC: event unblocked
[    0.340002] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.340002] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
[    0.340063] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.340063] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.340063] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.340063] vgaarb: loaded
[    0.340093] EDAC MC: Ver: 3.0.0
[    0.340646] Registered efivars operations
[    0.347933] PCI: Using ACPI for IRQ routing
[    0.371974] PCI: pci_cache_line_size set to 64 bytes
[    0.372623] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.372624] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.372625] e820: reserve RAM buffer [mem 0x74455000-0x77ffffff]
[    0.372626] e820: reserve RAM buffer [mem 0x7a4c5000-0x7bffffff]
[    0.372627] e820: reserve RAM buffer [mem 0x7b600000-0x7bffffff]
[    0.372628] e820: reserve RAM buffer [mem 0x47e800000-0x47fffffff]
[    0.372699] NetLabel: Initializing
[    0.372699] NetLabel:  domain hash size = 128
[    0.372700] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.372716] NetLabel:  unlabeled traffic allowed by default
[    0.372730] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.372730] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.374363] clocksource: Switched to clocksource hpet
[    0.381386] VFS: Disk quotas dquot_6.6.0
[    0.381400] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.381445] pnp: PnP ACPI init
[    0.381692] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.381694] system 00:00: [io  0xffff] has been reserved
[    0.381696] system 00:00: [io  0xffff] has been reserved
[    0.381697] system 00:00: [io  0xffff] has been reserved
[    0.381699] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.381700] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.381705] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.381807] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.381840] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.381843] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.381987] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.382002] pnp 00:04: Plug and Play ACPI device, IDs DLL075b PNP0f13 (active)
[    0.382222] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.382224] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.382226] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.382227] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.382229] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.382230] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.382232] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.382233] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.382235] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.382237] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.382240] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.382275] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.382277] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.382278] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.382280] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.382281] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.382283] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.382285] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.382289] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.382594] system 00:07: [io  0xff00-0xfffe] has been reserved
[    0.382597] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.383716] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[    0.383718] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[    0.383721] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.387033] pnp: PnP ACPI: found 9 devices
[    0.394563] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.394576] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01-39] add_size 1000
[    0.394597] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.394600] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[    0.394602] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.394606] pci 0000:00:1c.0:   bridge window [mem 0xc4000000-0xda0fffff]
[    0.394609] pci 0000:00:1c.0:   bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[    0.394614] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[    0.394618] pci 0000:00:1c.4:   bridge window [mem 0xdc000000-0xdc1fffff]
[    0.394624] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[    0.394628] pci 0000:00:1c.5:   bridge window [mem 0xdc300000-0xdc3fffff]
[    0.394634] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[    0.394638] pci 0000:00:1d.0:   bridge window [mem 0xdc200000-0xdc2fffff]
[    0.394645] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.394647] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.394648] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.394649] pci_bus 0000:00: resource 7 [mem 0x7f800000-0xdfffffff window]
[    0.394651] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.394652] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.394653] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff]
[    0.394655] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
[    0.394656] pci_bus 0000:3a: resource 1 [mem 0xdc000000-0xdc1fffff]
[    0.394658] pci_bus 0000:3b: resource 1 [mem 0xdc300000-0xdc3fffff]
[    0.394659] pci_bus 0000:3c: resource 1 [mem 0xdc200000-0xdc2fffff]
[    0.394795] NET: Registered protocol family 2
[    0.394923] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.395086] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.395183] TCP: Hash tables configured (established 131072 bind 65536)
[    0.395209] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.395246] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.395311] NET: Registered protocol family 1
[    0.395324] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.396523] PCI: CLS 0 bytes, default 64
[    0.396552] Unpacking initramfs...
[    0.653647] Freeing initrd memory: 16764K
[    0.653675] DMAR: ACPI device "device:79" under DMAR at fed91000 as 00:15.0
[    0.653678] DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.1
[    0.653691] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.653693] software IO TLB [mem 0x6e642000-0x72642000] (64MB) mapped at [ffff9b776e642000-ffff9b7772641fff]
[    0.653828] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns
[    0.653950] Scanning for low memory corruption every 60 seconds
[    0.654482] Initialise system trusted keyrings
[    0.654490] Key type blacklist registered
[    0.654571] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.655410] zbud: loaded
[    0.658680] Key type asymmetric registered
[    0.658705] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.658759] io scheduler noop registered
[    0.658759] io scheduler deadline registered
[    0.658791] io scheduler cfq registered (default)
[    0.658792] io scheduler mq-deadline registered
[    0.658793] io scheduler kyber registered
[    0.658809] io scheduler bfq registered
[    0.659700] pcieport 0000:00:1c.0: AER enabled with IRQ 122
[    0.659729] pcieport 0000:00:1c.4: AER enabled with IRQ 123
[    0.659755] pcieport 0000:00:1c.5: AER enabled with IRQ 124
[    0.659782] pcieport 0000:00:1d.0: AER enabled with IRQ 125
[    0.659805] efifb: probing for efifb
[    0.659816] efifb: framebuffer at 0x90000000, using 8128k, total 8128k
[    0.659817] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.659817] efifb: scrolling: redraw
[    0.659819] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.663808] Console: switching to colour frame buffer device 240x67
[    0.667702] fb0: EFI VGA frame buffer device
[    0.667709] intel_idle: MWAIT substates: 0x11142120
[    0.667710] intel_idle: v0.4.1 model 0x8E
[    0.667898] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.668174] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.668999] rtc_cmos 00:01: RTC can wake from S4
[    0.669394] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.669479] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.669489] intel_pstate: Intel P-state driver initializing
[    0.669839] intel_pstate: HWP enabled
[    0.669934] ledtrig-cpu: registered to indicate activity on CPUs
[    0.669974] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[    0.669985] intel_pmc_core 0000:00:1f.2: enabling device (0000 -> 0002)
[    0.670194] NET: Registered protocol family 10
[    0.673234] Segment Routing with IPv6
[    0.673247] NET: Registered protocol family 17
[    0.673558] RAS: Correctable Errors collector initialized.
[    0.673574] microcode: sig=0x806e9, pf=0x40, revision=0x80
[    0.673662] microcode: Microcode Update Driver: v2.2.
[    0.673668] sched_clock: Marking stable (673659604, 0)->(678882746, -5223142)
[    0.673953] registered taskstats version 1
[    0.673957] Loading compiled-in X.509 certificates
[    0.673968] zswap: loaded using pool lzo/zbud
[    0.676046] Key type big_key registered
[    0.677505]   Magic number: 2:351:250
[    0.677547] memory memory124: hash matches
[    0.677696] rtc_cmos 00:01: setting system clock to 2018-01-25 22:13:58 UTC (1516918438)
[    0.679076] Freeing unused kernel memory: 1360K
[    0.679077] Write protecting the kernel read-only data: 16384k
[    0.679421] Freeing unused kernel memory: 2016K
[    0.681023] Freeing unused kernel memory: 1304K
[    0.705154] device-mapper: uevent: version 1.0.3
[    0.705200] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.750133] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.752025] i8042: Warning: Keylock active
[    0.754304] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.754327] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.765588] ACPI: bus type USB registered
[    0.765606] usbcore: registered new interface driver usbfs
[    0.765611] usbcore: registered new interface driver hub
[    0.765618] rtsx_pci 0000:3b:00.0: enabling device (0000 -> 0002)
[    0.765628] usbcore: registered new device driver usb
[    0.766144] nvme nvme0: pci function 0000:3c:00.0
[    0.768539] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.768542] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.769707] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.769719] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.769892] hub 1-0:1.0: USB hub found
[    0.769926] hub 1-0:1.0: 12 ports detected
[    0.770585] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.770587] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.770671] hub 2-0:1.0: USB hub found
[    0.770679] hub 2-0:1.0: 6 ports detected
[    0.771100] usb: port power management may be unreliable
[    0.771619] AVX2 version of gcm_enc/dec engaged.
[    0.771619] AES CTR mode by8 optimization enabled
[    0.789252] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.980248]  nvme0n1: p1 p2 p3
[    1.100205] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[    1.366877] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[    1.677123] clocksource: Switched to clocksource tsc
[    3.768541] CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
[    3.768542] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
[    3.768544] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[    3.768570] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[    3.768571] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
[    3.768658] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
[    3.769526] CPU2: Core temperature/speed normal
[    3.769526] CPU0: Core temperature/speed normal
[    3.769527] CPU2: Package temperature/speed normal
[    3.769528] CPU0: Package temperature/speed normal
[    3.769556] CPU1: Package temperature/speed normal
[    3.769556] CPU3: Package temperature/speed normal
[    4.887682] NET: Registered protocol family 38
[    5.067530] PM: Starting manual resume from disk
[    5.067714] PM: Image not found (code -22)
[    5.106861] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[    5.196498] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.203417] systemd[1]: systemd 236 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    5.220411] systemd[1]: Detected architecture x86-64.
[    5.221097] systemd[1]: Set hostname to <syre-laptop>.
[    5.293830] random: crng init done
[    5.324022] systemd[1]: Created slice User and Session Slice.
[    5.324270] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.324289] systemd[1]: Reached target Login Prompts.
[    5.324299] systemd[1]: Reached target Remote File Systems.
[    5.324347] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.324382] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.324392] systemd[1]: Reached target Local Encrypted Volumes.
[    5.354420] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
[    5.377137] SCSI subsystem initialized
[    5.415474] vboxdrv: loading out-of-tree module taints kernel.
[    5.462316] vboxdrv: Found 4 processor cores
[    5.480973] vboxdrv: TSC mode is Invariant, tentative frequency 2399998302 Hz
[    5.480979] vboxdrv: Successfully loaded version 5.2.6 (interface 0x00290000)
[    5.498814] VBoxPciLinuxInit
[    5.510248] vboxpci: IOMMU not found (not registered)
[    5.516511] VBoxNetAdp: Successfully started.
[    5.522912] systemd-journald[282]: Received request to flush runtime journal from PID 1
[    5.523679] VBoxNetFlt: Successfully started.
[    5.621445] ACPI: AC Adapter [AC] (off-line)
[    5.624588] input: Intel HID events as /devices/platform/INT33D5:00/input/input3
[    5.624987] intel-hid INT33D5:00: platform supports 5 button array
[    5.625018] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input4
[    5.625035] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    5.625582] ACPI: Lid Switch [LID0]
[    5.625676] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[    5.625685] ACPI: Power Button [PBTN]
[    5.625710] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[    5.625713] ACPI: Sleep Button [SBTN]
[    5.625736] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    5.625743] ACPI: Power Button [PWRF]
[    5.671992] input: Intel Virtual Button driver as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input8
[    5.709528] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
[    5.722658] Bluetooth: Core ver 2.22
[    5.722680] NET: Registered protocol family 31
[    5.722681] Bluetooth: HCI device and connection manager initialized
[    5.722687] Bluetooth: HCI socket layer initialized
[    5.722695] Bluetooth: L2CAP socket layer initialized
[    5.722707] Bluetooth: SCO socket layer initialized
[    5.723889] hidraw: raw HID events driver (C) Jiri Kosina
[    5.726046] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    5.738505] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    5.743367] thermal LNXTHERM:00: registered as thermal_zone5
[    5.743369] ACPI: Thermal Zone [THM] (25 C)
[    5.747464] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    5.757154] Linux agpgart interface v0.103
[    5.758480] ACPI: Battery Slot [BAT0] (battery present)
[    5.763426] Bluetooth: HCI UART driver ver 2.3
[    5.763428] Bluetooth: HCI UART protocol H4 registered
[    5.763429] Bluetooth: HCI UART protocol BCSP registered
[    5.763447] Bluetooth: HCI UART protocol LL registered
[    5.763447] Bluetooth: HCI UART protocol ATH3K registered
[    5.763448] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    5.763473] Bluetooth: HCI UART protocol Intel registered
[    5.763497] Bluetooth: HCI UART protocol Broadcom registered
[    5.763498] Bluetooth: HCI UART protocol QCA registered
[    5.763498] Bluetooth: HCI UART protocol AG6XX registered
[    5.763499] Bluetooth: HCI UART protocol Marvell registered
[    5.773681] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    5.773718] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    5.777337] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.777823] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    5.777852] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    5.794350] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    5.809850] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    5.810547] input: PC Speaker as /devices/platform/pcspkr/input/input9
[    5.811020] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    5.843820] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    5.843821] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    5.843822] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.843823] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    5.843823] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    5.843824] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    5.892340] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: data=ordered
[    5.900826] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    5.947260] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    5.951419] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    5.983836] Adding 8159228k swap on /dev/mapper/AntergosVG-AntergosSwap.  Priority:-2 extents:1 across:8159228k SSFS
[    6.051711] dell-wmi 9DBB5994-A997-11DA-B012-B622A1EF5492: Detected Dell WMI interface version 1
[    6.051811] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input10
[    6.080935] iTCO_vendor_support: vendor-support=0
[    6.082540] Setting dangerous option enable_rc6 - tainting kernel
[    6.082542] Setting dangerous option enable_fbc - tainting kernel
[    6.082543] Setting dangerous option enable_guc_loading - tainting kernel
[    6.082544] Setting dangerous option enable_guc_submission - tainting kernel
[    6.082546] i915: unknown parameter 'enable' ignored
[    6.082547] Setting dangerous option enable_psr - tainting kernel
[    6.082548] Setting dangerous option disable_power_well - tainting kernel
[    6.082944] [drm] Found 64MB of eDRAM
[    6.084005] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    6.084144] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    6.085266] [drm] Memory usable by graphics device = 4078M
[    6.085268] checking generic (90000000 7f0000) vs hw (90000000 10000000)
[    6.085269] fb: switching to inteldrmfb from EFI VGA
[    6.085286] Console: switching to colour dummy device 80x25
[    6.085344] [drm] Replacing VGA console driver
[    6.087205] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.090053] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.090055] [drm] Driver supports precise vblank timestamp query.
[    6.092131] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    6.094237] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[    6.095712] intel_rapl: Found RAPL domain package
[    6.095714] intel_rapl: Found RAPL domain core
[    6.095715] intel_rapl: Found RAPL domain uncore
[    6.095715] intel_rapl: Found RAPL domain dram
[    6.118685] [drm] GuC submission enabled (firmware i915/kbl_guc_ver9_14.bin [version 9.14])
[    6.132515] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[    6.133938] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.134624] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[    6.134837] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.136471] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input13
[    6.136817] fbcon: inteldrmfb (fb0) is primary device
[    6.138388] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[    6.147321] ath10k_pci 0000:3a:00.0: enabling device (0000 -> 0002)
[    6.149222] ath10k_pci 0000:3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    6.169670] mousedev: PS/2 mouse device common for all mice
[    6.411991] ath10k_pci 0000:3a:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:3a:00.0.bin failed with error -2
[    6.412024] ath10k_pci 0000:3a:00.0: Direct firmware load for ath10k/cal-pci-0000:3a:00.0.bin failed with error -2
[    6.416733] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[    6.416738] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[    6.418205] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00051-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 c3fd4411
[    6.484034] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 0e26ef70
[    6.961558] media: Linux media interface: v0.10
[    6.973085] Linux video capture interface: v2.00
[    7.062824] ath10k_pci 0000:3a:00.0: Unknown eventid: 118809
[    7.067182] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118
[    7.070141] ath10k_pci 0000:3a:00.0: htt-ver 3.44 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[    7.087244] usbcore: registered new interface driver btusb
[    7.088338] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[    7.088339] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[    7.101974] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:568b)
[    7.107981] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[    7.107983] uvcvideo 1-5:1.0: Entity type for entity Extension 7 was not initialized!
[    7.107984] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[    7.107985] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[    7.108067] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input18
[    7.108150] usbcore: registered new interface driver uvcvideo
[    7.108150] USB Video Class driver (1.1.1)
[    7.117394] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[    7.151899] ath: EEPROM regdomain: 0x6c
[    7.151900] ath: EEPROM indicates we should expect a direct regpair map
[    7.151902] ath: Country alpha2 being used: 00
[    7.151903] ath: Regpair used: 0x6c
[    7.165461] ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0
[    7.279015] Console: switching to colour frame buffer device 240x67
[    7.308569] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    7.360349] [drm] RC6 on
[    7.427291] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    7.427299] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.427306] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    7.427311] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    7.427315] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    7.427321] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[    7.427327] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1a
[    7.427332] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    7.441532] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.441536] Bluetooth: BNEP filters: protocol multicast
[    7.441544] Bluetooth: BNEP socket layer initialized
[    7.499952] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    7.502206] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    7.502408] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    7.502582] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    7.502763] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[    7.502942] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[    7.503109] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[    7.865702] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[    8.576765] ath10k_pci 0000:3a:00.0: Unknown eventid: 118809
[    8.580060] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118
[    8.629225] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[    8.629283] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    8.715441] Bridge firewalling registered
[    8.761123] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    9.438809] ath10k_pci 0000:3a:00.0: Unknown eventid: 118809
[    9.441823] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118
[    9.483932] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[    9.602201] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[    9.645325] Initializing XFRM netlink socket
[    9.654910] Netfilter messages via NETLINK v0.30.
[    9.660781] ctnetlink v0.93: registering with nfnetlink.
[    9.919281] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[   10.708452] Bluetooth: RFCOMM TTY layer initialized
[   10.708457] Bluetooth: RFCOMM socket layer initialized
[   10.708461] Bluetooth: RFCOMM ver 1.11
[   14.524933] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[   19.437566] wlp58s0: authenticate with 62:38:e0:da:45:80
[   19.481404] wlp58s0: send auth to 62:38:e0:da:45:80 (try 1/3)
[   19.482174] wlp58s0: authenticated
[   19.483347] wlp58s0: associate with 62:38:e0:da:45:80 (try 1/3)
[   19.493249] wlp58s0: RX AssocResp from 62:38:e0:da:45:80 (capab=0x11 status=0 aid=5)
[   19.495797] wlp58s0: associated
[   19.498673] ath: EEPROM regdomain: 0x8114
[   19.498675] ath: EEPROM indicates we should expect a country code
[   19.498675] ath: doing EEPROM country->regdmn map search
[   19.498676] ath: country maps to regdmn code: 0x37
[   19.498676] ath: Country alpha2 being used: DE
[   19.498677] ath: Regpair used: 0x37
[   19.498677] ath: regdomain 0x8114 dynamically updated by country IE
[   19.505174] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready
[   24.440348] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[   27.390081] Bluetooth: hci0 urb ffff9b7b5c6b9600 failed to resubmit (113)
[   37.407677] Bluetooth: hci0 urb ffff9b7b5c6b9180 failed to resubmit (113)
[   47.192889] Bluetooth: hci0 urb ffff9b7b5c6b9840 failed to resubmit (113)
[  132.206272] Bluetooth: hci0 urb ffff9b7b67b44f00 failed to resubmit (113)
[  150.128103] Bluetooth: hci0 urb ffff9b7b687de9c0 failed to resubmit (113)
[  222.019293] Bluetooth: hci0 urb ffff9b7b67b440c0 failed to resubmit (113)
[  388.190883] Bluetooth: hci0 urb ffff9b7b687def00 failed to resubmit (113)
● bluetooth.service - Bluetooth service
   Loaded: loaded (/usr/lib/systemd/system/bluetooth.service; enabled; vendor preset: disabled)
   Active: active (running) since Thu 2018-01-25 23:14:05 CET; 18min ago
     Docs: man:bluetoothd(8)
 Main PID: 566 (bluetoothd)
   Status: "Running"
    Tasks: 1 (limit: 4915)
   CGroup: /system.slice/bluetooth.service
           └─566 /usr/lib/bluetooth/bluetoothd

Jan 25 23:14:42 syre-laptop bluetoothd[566]: Failed to set mode: Failed (0x03)
Jan 25 23:14:53 syre-laptop bluetoothd[566]: Failed to set mode: Failed (0x03)
Jan 25 23:15:59 syre-laptop bluetoothd[566]: Endpoint unregistered: sender=:1.30 path=/MediaEndpoint/A2DPSource
Jan 25 23:15:59 syre-laptop bluetoothd[566]: Endpoint unregistered: sender=:1.30 path=/MediaEndpoint/A2DPSink
Jan 25 23:16:00 syre-laptop bluetoothd[566]: Endpoint registered: sender=:1.123 path=/MediaEndpoint/A2DPSource
Jan 25 23:16:00 syre-laptop bluetoothd[566]: Endpoint registered: sender=:1.123 path=/MediaEndpoint/A2DPSink
Jan 25 23:16:17 syre-laptop bluetoothd[566]: Failed to set mode: Failed (0x03)
Jan 25 23:16:36 syre-laptop bluetoothd[566]: Failed to set mode: Failed (0x03)
Jan 25 23:17:47 syre-laptop bluetoothd[566]: Failed to set mode: Failed (0x03)
Jan 25 23:20:34 syre-laptop bluetoothd[566]: Failed to set mode: Failed (0x03)

Last edited by syre (2018-01-25 22:32:41)

Offline

#6 2018-12-05 00:35:44

tuxfusion
Member
Registered: 2007-12-31
Posts: 98

Re: Cannot enable Bluetooth

I created complex script to toggle and connect to my bluetooth devices with a keypress. I had the same problem. I couldn't power the device with bluetoothctl no matter what. I solved it with:

rfkill block bluetooth
sleep 1
rfkill unblock bluetooth

then "power on" with bluetoothctl and connect

Offline

#7 2018-12-05 01:12:53

circleface
Member
Registered: 2012-05-26
Posts: 639

Re: Cannot enable Bluetooth

tuxfusion, thank you for your contribution to this thread.  However, please do not necrobump old threads in the future, since I doubt the original poster is still looking for a solution.

Offline

Board footer

Powered by FluxBB