You are not logged in.
Pages: 1
Hello everyone! I haven't been able to enable Bluetooth in a while. gnome-bluetooth just tells me that bluetooth is off regardless of if I select to turn on/off and I cannot access the setting since it's off. Blueman also reports that it is off, and give errors like 'Device not ready'. I have checked and it is not rfkill blocked.
Using `bluetoothctl`:
[NEW] Controller 9C:B6:D0:E2:96:0C arch [default]
[NEW] Device 88:C6:26:AB:93:D0 Vlad BOOM 2
Agent registered
[bluetooth]# default-agent
Default agent request successful
[bluetooth]# power on
Failed to set power on: org.bluez.Error.Failed
[bluetooth]# scan on
Failed to start discovery: org.bluez.Error.NotReady
Also `systemctl status bluetooth`:
Loaded: loaded (/usr/lib/systemd/system/bluetooth.service; disabled; vendor preset: disabled)
Active: active (running) since Fri 2018-01-19 19:18:50 GMT; 13min ago
Docs: man:bluetoothd(8)
Main PID: 3193 (bluetoothd)
Status: "Running"
Tasks: 1 (limit: 4915)
CGroup: /system.slice/bluetooth.service
└─3193 /usr/lib/bluetooth/bluetoothd
Jan 19 19:18:50 arch bluetoothd[3193]: Endpoint registered: sender=:1.108 path=/MediaEndpoint/A2DPSink
Jan 19 19:18:50 arch bluetoothd[3193]: Endpoint registered: sender=:1.132 path=/MediaEndpoint/A2DPSource
Jan 19 19:18:50 arch bluetoothd[3193]: Endpoint registered: sender=:1.132 path=/MediaEndpoint/A2DPSink
Jan 19 19:18:50 arch bluetoothd[3193]: RFCOMM server failed for Headset Voice gateway: rfcomm_bind: Address already in use (98)
Jan 19 19:18:50 arch bluetoothd[3193]: RFCOMM server failed for :1.132/Profile/HSPHSProfile/00001108-0000-1000-8000-00805f9b34fb: rfcomm_bind:
Jan 19 19:19:01 arch bluetoothd[3193]: Failed to set mode: Failed (0x03)
Jan 19 19:19:11 arch bluetoothd[3193]: Failed to set mode: Failed (0x03)
Jan 19 19:19:21 arch bluetoothd[3193]: Failed to set mode: Failed (0x03)
Jan 19 19:19:31 arch bluetoothd[3193]: Failed to set mode: Failed (0x03)
Jan 19 19:19:42 arch bluetoothd[3193]: Failed to set mode: Failed (0x03)
Restarting or disconnecting devices did not help. This issue has persistet for a few weeks and it used to work before. I assume it must have been a system update. Any help would be appreciated. Many thanks!
Offline
Hello vldab and welcome to Arch!
As indicated here, you might need to unblock your bluetooth adapter. Could you please post the output of `rfkill list`? And, just to get the whole picture, you might also want to add the outputs of `lspci` and `dmesg` (the latter best after a reboot and after trying the `power on` command in bluetoothctl).
Last edited by robg (2018-01-19 22:15:11)
Offline
As mentioned above, it is not rfkill blocked:
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
Here's the `lspci` output:
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 05)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) (rev 05)
00:02.0 VGA compatible controller: Intel Corporation Device 591b (rev 04)
00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 05)
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31)
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO I2C Controller #0 (rev 31)
00:15.1 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO I2C Controller #1 (rev 31)
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #1 (rev f1)
00:1c.1 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #2 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #9 (rev f1)
00:1d.4 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #13 (rev f1)
00:1d.6 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #15 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
00:1f.3 Audio device: Intel Corporation CM238 HD Audio Controller (rev 31)
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
01:00.0 3D controller: NVIDIA Corporation GP107M [GeForce GTX 1050 Mobile] (rev ff)
02:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader (rev 01)
04:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961
And here is some output from dmesg, after trying to power on.
It looks like the same sequence was attempted at least 4 times after boot.
[ 1.539973] Bluetooth: Core ver 2.22
[ 1.539984] NET: Registered protocol family 31
[ 1.539985] Bluetooth: HCI device and connection manager initialized
[ 1.539987] Bluetooth: HCI socket layer initialized
[ 1.539988] Bluetooth: L2CAP socket layer initialized
[ 1.539991] Bluetooth: SCO socket layer initialized
[ 1.548440] AVX2 version of gcm_enc/dec engaged.
[ 1.548441] AES CTR mode by8 optimization enabled
[ 1.560163] Bluetooth: HCI UART driver ver 2.3
[ 1.560164] Bluetooth: HCI UART protocol H4 registered
[ 1.560165] Bluetooth: HCI UART protocol BCSP registered
[ 1.560176] Bluetooth: HCI UART protocol LL registered
[ 1.560177] Bluetooth: HCI UART protocol ATH3K registered
[ 1.560177] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 1.560202] Bluetooth: HCI UART protocol Intel registered
[ 1.560220] Bluetooth: HCI UART protocol Broadcom registered
[ 1.560220] Bluetooth: HCI UART protocol QCA registered
[ 1.560221] Bluetooth: HCI UART protocol AG6XX registered
[ 1.560221] Bluetooth: HCI UART protocol Marvell registered
[ 1.594946] ACPI: Battery Slot [BAT0] (battery present)
[ 1.600188] clocksource: Switched to clocksource tsc
[ 1.613426] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[ 1.614907] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 1.627605] intel_rapl: Found RAPL domain package
[ 1.627607] intel_rapl: Found RAPL domain core
[ 1.627608] intel_rapl: Found RAPL domain uncore
[ 1.627608] intel_rapl: Found RAPL domain dram
[ 1.653350] usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
[ 2.104625] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 2.107674] bbswitch: loading out-of-tree module taints kernel.
[ 2.111187] bbswitch: version 0.8
[ 2.111197] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 2.111888] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 2.111912] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170728/nsarguments-100)
[ 2.112046] bbswitch: detected an Optimus _DSM function
[ 2.112053] pci 0000:01:00.0: enabling device (0006 -> 0007)
[ 2.114906] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 2.116029] dell-wmi 9DBB5994-A997-11DA-B012-B622A1EF5492: Detected Dell WMI interface version 1
[ 2.116091] input: Dell WMI hotkeys as /devices/platform/PNP0C14:03/wmi_bus/wmi_bus-PNP0C14:03/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input9
[ 2.116342] bbswitch: disabling discrete graphics
[ 2.126027] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 2.126266] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 2.143654] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.143656] Bluetooth: BNEP filters: protocol multicast
[ 2.143659] Bluetooth: BNEP socket layer initialized
[ 2.152574] random: crng init done
[ 2.213552] usb 2-2.4: new SuperSpeed USB device number 3 using xhci_hcd
[ 2.231621] hub 2-2.4:1.0: USB hub found
[ 2.231916] hub 2-2.4:1.0: 2 ports detected
[ 2.282296] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2
[ 2.282315] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2
[ 2.284115] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[ 2.284120] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[ 2.285424] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4.1-00051-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 c3fd4411
[ 2.350654] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 0e26ef70
[ 2.353348] psmouse serio1: synaptics: Unable to query device: -1
[ 2.353358] usb 1-12: new high-speed USB device number 5 using xhci_hcd
[ 2.490395] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 2.558741] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 2.561123] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 2.561165] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 2.565479] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 2.566360] iTCO_vendor_support: vendor-support=0
[ 2.566988] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.567187] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 2.567325] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.569251] input: DLL07BE:01 06CB:7A13 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL07BE:01/0018:06CB:7A13.0001/input/input12
[ 2.569288] hid-multitouch 0018:06CB:7A13.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL07BE:01 06CB:7A13] on i2c-DLL07BE:01
[ 2.571903] mousedev: PS/2 mouse device common for all mice
[ 2.581017] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 2.583404] [drm] Memory usable by graphics device = 4096M
[ 2.583407] checking generic (80000000 7f0000) vs hw (80000000 10000000)
[ 2.583407] fb: switching to inteldrmfb from EFI VGA
[ 2.583434] Console: switching to colour dummy device 80x25
[ 2.583507] [drm] Replacing VGA console driver
[ 2.588725] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.588726] [drm] Driver supports precise vblank timestamp query.
[ 2.590126] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.593604] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[ 2.596010] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 2.597564] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[ 2.601597] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.602745] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17
[ 2.603003] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
[ 2.603035] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input18
[ 2.603173] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.626679] usb 1-2.2: new full-speed USB device number 6 using xhci_hcd
[ 2.676939] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3266: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 2.676941] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.676943] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 2.676943] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 2.676944] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 2.676946] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x18
[ 2.676947] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 2.676948] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 2.734386] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 2.734431] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 2.734472] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 2.734514] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[ 2.734554] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[ 2.734590] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[ 2.793354] usb 1-2.4: new high-speed USB device number 7 using xhci_hcd
[ 2.884218] hub 1-2.4:1.0: USB hub found
[ 2.884232] hub 1-2.4:1.0: 2 ports detected
[ 2.934678] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[ 2.937585] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 2.938255] ath10k_pci 0000:02:00.0: htt-ver 3.44 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 2.976141] fbcon: inteldrmfb (fb0) is primary device
[ 2.976186] Console: switching to colour frame buffer device 240x67
[ 2.976190] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.019710] ath: EEPROM regdomain: 0x6c
[ 3.019711] ath: EEPROM indicates we should expect a direct regpair map
[ 3.019712] ath: Country alpha2 being used: 00
[ 3.019712] ath: Regpair used: 0x6c
[ 3.494516] [drm] RC6 on
[ 3.632930] usbcore: registered new interface driver btusb
[ 3.646207] media: Linux media interface: v0.10
[ 3.657829] Linux video capture interface: v2.00
[ 3.667615] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6713)
[ 3.694102] uvcvideo 1-12:1.0: Entity type for entity Extension 4 was not initialized!
[ 3.694104] uvcvideo 1-12:1.0: Entity type for entity Extension 3 was not initialized!
[ 3.694105] uvcvideo 1-12:1.0: Entity type for entity Processing 2 was not initialized!
[ 3.694107] uvcvideo 1-12:1.0: Entity type for entity Camera 1 was not initialized!
[ 3.694208] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input25
[ 3.694307] usbcore: registered new interface driver uvcvideo
[ 3.694307] USB Video Class driver (1.1.1)
[ 3.740744] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[ 3.743654] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 3.794498] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.799389] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4.158105] usbcore: registered new interface driver usbhid
[ 4.158107] usbhid: USB HID core driver
[ 4.160018] input: Logitech Gaming Keyboard G610 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:046D:C333.0002/input/input26
[ 4.216941] hid-generic 0003:046D:C333.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Keyboard G610] on usb-0000:00:14.0-2.1/input0
[ 4.217069] input: Logitech Gaming Keyboard G610 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:046D:C333.0003/input/input27
[ 4.273629] hid-generic 0003:046D:C333.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [Logitech Gaming Keyboard G610] on usb-0000:00:14.0-2.1/input1
[ 4.273721] input: Xornet gaming mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:2516:0003.0004/input/input28
[ 4.273842] hid-generic 0003:2516:0003.0004: input,hiddev1,hidraw3: USB HID v1.11 Mouse [Xornet gaming mouse] on usb-0000:00:14.0-2.2/input0
[ 4.593593] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[ 4.596502] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 4.647408] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4.657001] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.438722] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.051170] Bluetooth: RFCOMM TTY layer initialized
[ 6.051177] Bluetooth: RFCOMM socket layer initialized
[ 6.051184] Bluetooth: RFCOMM ver 1.11
[ 8.050216] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 8.253364] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 10.331843] wlan0: authenticate with 40:18:b1:8b:c8:e8
[ 10.370286] wlan0: send auth to 40:18:b1:8b:c8:e8 (try 1/3)
[ 10.371171] wlan0: authenticated
[ 10.373425] wlan0: associate with 40:18:b1:8b:c8:e8 (try 1/3)
[ 10.375608] wlan0: RX AssocResp from 40:18:b1:8b:c8:e8 (capab=0x411 status=0 aid=3)
[ 10.378330] wlan0: associated
[ 10.418970] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 40:18:b1:8b:c8:e8
[ 10.569765] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0
[ 10.569773] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e0(Transmitter ID)
[ 10.569775] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00001000/00002000
[ 10.569777] pcieport 0000:00:1c.0: [12] Replay Timer Timeout
[ 10.570493] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 12.796824] fuse init (API version 7.26)
[ 13.068374] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[ 15.012111] rfkill: input handler disabled
[ 30.980398] pcieport 0000:00:1d.0: AER: Corrected error received: id=00e8
[ 30.980405] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e8(Transmitter ID)
[ 30.980407] pcieport 0000:00:1d.0: device [8086:a118] error status/mask=00001000/00002000
[ 30.980409] pcieport 0000:00:1d.0: [12] Replay Timer Timeout
[ 35.436381] pcieport 0000:00:1d.0: AER: Corrected error received: id=00e8
[ 35.436385] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e8(Transmitter ID)
[ 35.436388] pcieport 0000:00:1d.0: device [8086:a118] error status/mask=00001000/00002000
[ 35.436389] pcieport 0000:00:1d.0: [12] Replay Timer Timeout
[ 40.663900] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 43.393495] Bluetooth: hci0 urb ffff9a929eb02f00 failed to resubmit (113)
[ 53.420170] Bluetooth: hci0 urb ffff9a929eb02000 failed to resubmit (113)
[ 63.446951] Bluetooth: hci0 urb ffff9a929e978c00 failed to resubmit (113)
[ 83.791078] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0
[ 83.791085] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e0(Transmitter ID)
[ 83.791088] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00001000/00002000
[ 83.791090] pcieport 0000:00:1c.0: [12] Replay Timer Timeout
[ 86.526520] pcieport 0000:00:1d.0: AER: Corrected error received: id=00e8
[ 86.526526] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e8(Transmitter ID)
[ 86.526529] pcieport 0000:00:1d.0: device [8086:a118] error status/mask=00001000/00002000
[ 86.526531] pcieport 0000:00:1d.0: [12] Replay Timer Timeout
[ 102.130075] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0
[ 102.130089] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e0(Transmitter ID)
[ 102.130097] pcieport 0000:00:1c.0: device [8086:a110] error status/mask=00001000/00002000
[ 102.130103] pcieport 0000:00:1c.0: [12] Replay Timer Timeout
Hope this helps. Thanks!
Offline
As mentioned above, it is not rfkill blocked:
Apologies, apparently I have missed that. You might give hciconfig (bluez-utils) a try. Identify your bluetooth device and have a look at
up
Open and initialize HCI device.
down
Close HCI device.
Offline
I have exactly the same problem, with similar dmesg output and systemctl status:
[ 0.000000] microcode: microcode updated early to revision 0x80, date = 2018-01-04
[ 0.000000] Linux version 4.14.15-1-ARCH (builduser@heftig) (gcc version 7.2.1 20180116 (GCC)) #1 SMP PREEMPT Tue Jan 23 21:49:25 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/AntergosVG-AntergosRoot rw cryptdevice=/dev/disk/by-uuid/69436886-6456-4b40-98e3-54017c5bc57b:cryptAntergos quiet resume=UUID=249066c4-fa39-4ee7-8e72-8f385ab509e3
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000074454fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000074455000-0x0000000074455fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000074456000-0x0000000074456fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000074457000-0x000000007a4c4fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007a4c5000-0x000000007a84ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007a850000-0x000000007a893fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007a894000-0x000000007aefcfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007aefd000-0x000000007b51ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007b520000-0x000000007b5fefff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007b5ff000-0x000000007b5fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b600000-0x000000007f7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047e7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0x7a85d000 ACPI 2.0=0x7a85d000 SMBIOS=0x7b330000 SMBIOS 3.0=0x7b32f000 ESRT=0x7b29f118 MPS=0xfcbb0 MEMATTR=0x77de1018
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Dell Inc. XPS 13 9360/0PF86Y, BIOS 2.3.1 10/03/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x47e800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 007E000000 mask 7FFE000000 uncachable
[ 0.000000] 2 base 007D000000 mask 7FFF000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x7b600 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fce20-0x000fce2f] mapped at [ffffffffff240e20]
[ 0.000000] esrt: Reserving ESRT space from 0x000000007b29f118 to 0x000000007b29f150.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff9b7700097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x12562d000, 0x12562dfff] PGTABLE
[ 0.000000] BRK [0x12562e000, 0x12562efff] PGTABLE
[ 0.000000] BRK [0x12562f000, 0x12562ffff] PGTABLE
[ 0.000000] BRK [0x125630000, 0x125630fff] PGTABLE
[ 0.000000] BRK [0x125631000, 0x125631fff] PGTABLE
[ 0.000000] BRK [0x125632000, 0x125632fff] PGTABLE
[ 0.000000] BRK [0x125633000, 0x125633fff] PGTABLE
[ 0.000000] BRK [0x125634000, 0x125634fff] PGTABLE
[ 0.000000] BRK [0x125635000, 0x125635fff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x35f31000-0x36f8ffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007A85D000 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x000000007A85D0C0 0000FC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007A8827C0 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000007A85D248 025576 (v02 DELL CBX3 01072009 INTL 20160422)
[ 0.000000] ACPI: FACS 0x000000007AEFA180 000040
[ 0.000000] ACPI: APIC 0x000000007A8828D0 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007A882958 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000007A8829A0 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000007A882A50 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000007A882A90 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x000000007A882AC8 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.000000] ACPI: BOOT 0x000000007A882E28 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007A882E50 0012CF (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: HPET 0x000000007A884120 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007A884158 000D84 (v02 INTEL xh_rvp07 00000000 INTL 20160422)
[ 0.000000] ACPI: UEFI 0x000000007A884EE0 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x000000007A884F28 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: LPIT 0x000000007A885E08 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.000000] ACPI: WSMT 0x000000007A885EA0 000028 (v01 DELL CBX3 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007A885EC8 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000007A886030 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000007A8862D0 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000007A8892D8 0000DB (v02 INTEL TbtTypeC 00000000 INTL 20160422)
[ 0.000000] ACPI: DBGP 0x000000007A8893B8 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x000000007A8893F0 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007A889448 0007AC (v02 INTEL UsbCTabl 00001000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000007A889BF8 0084F1 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[ 0.000000] ACPI: NHLT 0x000000007A8920F0 00002D (v00 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: BGRT 0x000000007A892120 000038 (v00 \xf3\xee 01072009 AMI 00010013)
[ 0.000000] ACPI: ASF! 0x000000007A892158 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: DMAR 0x000000007A8921F8 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000047e7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x47e7fc000-0x47e7fffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000047e7fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000074454fff]
[ 0.000000] node 0: [mem 0x0000000074457000-0x000000007a4c4fff]
[ 0.000000] node 0: [mem 0x000000007b5ff000-0x000000007b5fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000047e7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047e7fffff]
[ 0.000000] On node 0 totalpages: 4164705
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 25 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7764 pages used for memmap
[ 0.000000] DMA32 zone: 496836 pages, LIFO batch:31
[ 0.000000] Normal zone: 57248 pages used for memmap
[ 0.000000] Normal zone: 3663872 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x000000007d800000-0x000000007f7fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x74455000-0x74455fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x74456000-0x74456fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a4c5000-0x7a84ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a850000-0x7a893fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a894000-0x7aefcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7aefd000-0x7b51ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b520000-0x7b5fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b600000-0x7f7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f800000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x7f800000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 42 pages/cpu @ffff9b7b7e400000 s134168 r8192 d29672 u524288
[ 0.000000] pcpu-alloc: s134168 r8192 d29672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4099604
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/AntergosVG-AntergosRoot rw cryptdevice=/dev/disk/by-uuid/69436886-6456-4b40-98e3-54017c5bc57b:cryptAntergos quiet resume=UUID=249066c4-fa39-4ee7-8e72-8f385ab509e3
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16246304K/16658820K available (10252K kernel code, 1157K rwdata, 2792K rodata, 1360K init, 992K bss, 412516K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 29122 entries in 114 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 8448, nr_irqs: 1024, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.003333] tsc: Detected 2400.000 MHz processor
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4801.00 BogoMIPS (lpj=8000000)
[ 0.003333] pid_max: default: 32768 minimum: 301
[ 0.003333] ACPI: Core revision 20170728
[ 0.043090] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.043971] Security Framework initialized
[ 0.043972] Yama: becoming mindful.
[ 0.045879] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.046849] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.046884] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.046913] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.047086] CPU: Physical Processor ID: 0
[ 0.047087] CPU: Processor Core ID: 0
[ 0.047092] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.047092] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.047103] mce: CPU supports 9 MCE banks
[ 0.047112] CPU0: Thermal monitoring enabled (TM1)
[ 0.047130] process: using mwait in idle threads
[ 0.047133] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.047133] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.047135] Spectre V2 mitigation: Mitigation: Full generic retpoline
[ 0.047135] Spectre V2 mitigation: Filling RSB on context switch
[ 0.047806] Freeing SMP alternatives memory: 24K
[ 0.050096] smpboot: Max logical packages: 2
[ 0.050101] DMAR: Host address width 39
[ 0.050102] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.050108] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.050109] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.050113] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.050114] DMAR: RMRR base: 0x0000007a593000 end: 0x0000007a5b2fff
[ 0.050115] DMAR: RMRR base: 0x0000007d000000 end: 0x0000007f7fffff
[ 0.050116] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.050117] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.050118] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.050119] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.050120] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.051555] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.051556] x2apic enabled
[ 0.051566] Switched APIC routing to cluster x2apic.
[ 0.055557] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.088601] TSC deadline timer enabled
[ 0.088606] smpboot: CPU0: Intel(R) Core(TM) i7-7560U CPU @ 2.40GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[ 0.100043] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.100074] ... version: 4
[ 0.100075] ... bit width: 48
[ 0.100075] ... generic registers: 4
[ 0.100076] ... value mask: 0000ffffffffffff
[ 0.100076] ... max period: 00007fffffffffff
[ 0.100077] ... fixed-purpose events: 3
[ 0.100077] ... event mask: 000000070000000f
[ 0.106680] Hierarchical SRCU implementation.
[ 0.120152] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.126678] smp: Bringing up secondary CPUs ...
[ 0.153384] x86: Booting SMP configuration:
[ 0.153386] .... node #0, CPUs: #1 #2 #3
[ 0.208497] smp: Brought up 1 node, 4 CPUs
[ 0.208497] smpboot: Total of 4 processors activated (19207.00 BogoMIPS)
[ 0.210379] devtmpfs: initialized
[ 0.210379] x86/mm: Memory block size: 128MB
[ 0.211059] PM: Registering ACPI NVS region [mem 0x74455000-0x74455fff] (4096 bytes)
[ 0.211059] PM: Registering ACPI NVS region [mem 0x7a894000-0x7aefcfff] (6721536 bytes)
[ 0.211059] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.211059] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.211059] pinctrl core: initialized pinctrl subsystem
[ 0.211059] RTC time: 22:13:58, date: 01/25/18
[ 0.211059] NET: Registered protocol family 16
[ 0.211059] cpuidle: using governor ladder
[ 0.216708] cpuidle: using governor menu
[ 0.216715] Simple Boot Flag at 0x47 set to 0x80
[ 0.216736] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.216737] ACPI: bus type PCI registered
[ 0.216738] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.216794] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.216796] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.216806] PCI: Using configuration type 1 for base access
[ 0.223372] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.223372] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.223387] ACPI: Added _OSI(Module Device)
[ 0.223388] ACPI: Added _OSI(Processor Device)
[ 0.223389] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.223390] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.224478] ACPI: Executed 34 blocks of module-level executable AML code
[ 0.240337] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.246567] ACPI: Dynamic OEM Table Load:
[ 0.246574] ACPI: SSDT 0xFFFF9B7B6BB29800 000651 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.246821] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.246898] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.247898] ACPI: Dynamic OEM Table Load:
[ 0.247903] ACPI: SSDT 0xFFFF9B7B6B5D1C00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.248129] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.248571] ACPI: Dynamic OEM Table Load:
[ 0.248576] ACPI: SSDT 0xFFFF9B7B6BB2F800 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.249024] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.249238] ACPI: Dynamic OEM Table Load:
[ 0.249242] ACPI: SSDT 0xFFFF9B7B6B4CB200 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.249467] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.250904] ACPI: EC: EC started
[ 0.250905] ACPI: EC: interrupt blocked
[ 0.253237] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[ 0.253237] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.253237] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
[ 0.253237] ACPI: Interpreter enabled
[ 0.253237] ACPI: (supports S0 S3 S4 S5)
[ 0.253237] ACPI: Using IOAPIC for interrupt routing
[ 0.253237] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.253242] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.257745] ACPI: Power Resource [WRST] (on)
[ 0.258096] ACPI: Power Resource [WRST] (on)
[ 0.258443] ACPI: Power Resource [WRST] (on)
[ 0.258793] ACPI: Power Resource [WRST] (on)
[ 0.259145] ACPI: Power Resource [WRST] (on)
[ 0.259490] ACPI: Power Resource [WRST] (on)
[ 0.260028] ACPI: Power Resource [WRST] (on)
[ 0.260374] ACPI: Power Resource [WRST] (on)
[ 0.260716] ACPI: Power Resource [WRST] (on)
[ 0.261202] ACPI: Power Resource [WRST] (on)
[ 0.261548] ACPI: Power Resource [WRST] (on)
[ 0.261890] ACPI: Power Resource [WRST] (on)
[ 0.262239] ACPI: Power Resource [WRST] (on)
[ 0.262590] ACPI: Power Resource [WRST] (on)
[ 0.262936] ACPI: Power Resource [WRST] (on)
[ 0.263280] ACPI: Power Resource [WRST] (on)
[ 0.263628] ACPI: Power Resource [WRST] (on)
[ 0.264945] ACPI: Power Resource [WRST] (on)
[ 0.265289] ACPI: Power Resource [WRST] (on)
[ 0.265631] ACPI: Power Resource [WRST] (on)
[ 0.286198] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.286203] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.286538] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.286856] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.286857] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.287567] PCI host bridge to bus 0000:00
[ 0.287569] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.287571] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.287572] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.287574] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xdfffffff window]
[ 0.287575] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.287576] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.287585] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[ 0.287701] pci 0000:00:02.0: [8086:5926] type 00 class 0x030000
[ 0.287713] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
[ 0.287719] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.287723] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.287736] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.287856] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.287868] pci 0000:00:04.0: reg 0x10: [mem 0xdc420000-0xdc427fff 64bit]
[ 0.288068] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.288090] pci 0000:00:14.0: reg 0x10: [mem 0xdc410000-0xdc41ffff 64bit]
[ 0.288161] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.288354] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.288378] pci 0000:00:14.2: reg 0x10: [mem 0xdc434000-0xdc434fff 64bit]
[ 0.288626] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 0.288889] pci 0000:00:15.0: reg 0x10: [mem 0xdc433000-0xdc433fff 64bit]
[ 0.289849] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[ 0.293430] pci 0000:00:15.1: reg 0x10: [mem 0xdc432000-0xdc432fff 64bit]
[ 0.294302] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.294323] pci 0000:00:16.0: reg 0x10: [mem 0xdc431000-0xdc431fff 64bit]
[ 0.294394] pci 0000:00:16.0: PME# supported from D3hot
[ 0.294574] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.294650] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.294814] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[ 0.294887] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.295038] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[ 0.295110] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.295267] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[ 0.295346] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.295531] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[ 0.295764] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.295779] pci 0000:00:1f.2: reg 0x10: [mem 0xdc42c000-0xdc42ffff]
[ 0.295937] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380
[ 0.295964] pci 0000:00:1f.3: reg 0x10: [mem 0xdc428000-0xdc42bfff 64bit]
[ 0.295991] pci 0000:00:1f.3: reg 0x20: [mem 0xdc400000-0xdc40ffff 64bit]
[ 0.296040] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.296259] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.296320] pci 0000:00:1f.4: reg 0x10: [mem 0xdc430000-0xdc4300ff 64bit]
[ 0.296391] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.296672] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.296677] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.296682] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.297022] pci 0000:3a:00.0: [168c:003e] type 00 class 0x028000
[ 0.297351] pci 0000:3a:00.0: reg 0x10: [mem 0xdc000000-0xdc1fffff 64bit]
[ 0.298535] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold
[ 0.303623] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.303627] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
[ 0.303730] pci 0000:3b:00.0: [10ec:525a] type 00 class 0xff0000
[ 0.303761] pci 0000:3b:00.0: reg 0x14: [mem 0xdc300000-0xdc300fff]
[ 0.303864] pci 0000:3b:00.0: supports D1 D2
[ 0.303866] pci 0000:3b:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.316728] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[ 0.316732] pci 0000:00:1c.5: bridge window [mem 0xdc300000-0xdc3fffff]
[ 0.317106] pci 0000:3c:00.0: [1179:0115] type 00 class 0x010802
[ 0.317133] pci 0000:3c:00.0: reg 0x10: [mem 0xdc200000-0xdc203fff 64bit]
[ 0.317178] pci 0000:3c:00.0: enabling Extended Tags
[ 0.330323] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 0.330327] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.332932] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.332981] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.333028] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.333076] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.333122] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.333169] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.333216] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.333263] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.333345] ACPI: \_SB_.PEPD: Low Power S0 Idle interface disabled
[ 0.340002] ACPI: EC: interrupt unblocked
[ 0.340002] ACPI: EC: event unblocked
[ 0.340002] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.340002] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
[ 0.340063] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.340063] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.340063] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.340063] vgaarb: loaded
[ 0.340093] EDAC MC: Ver: 3.0.0
[ 0.340646] Registered efivars operations
[ 0.347933] PCI: Using ACPI for IRQ routing
[ 0.371974] PCI: pci_cache_line_size set to 64 bytes
[ 0.372623] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.372624] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.372625] e820: reserve RAM buffer [mem 0x74455000-0x77ffffff]
[ 0.372626] e820: reserve RAM buffer [mem 0x7a4c5000-0x7bffffff]
[ 0.372627] e820: reserve RAM buffer [mem 0x7b600000-0x7bffffff]
[ 0.372628] e820: reserve RAM buffer [mem 0x47e800000-0x47fffffff]
[ 0.372699] NetLabel: Initializing
[ 0.372699] NetLabel: domain hash size = 128
[ 0.372700] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.372716] NetLabel: unlabeled traffic allowed by default
[ 0.372730] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.372730] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.374363] clocksource: Switched to clocksource hpet
[ 0.381386] VFS: Disk quotas dquot_6.6.0
[ 0.381400] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.381445] pnp: PnP ACPI init
[ 0.381692] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.381694] system 00:00: [io 0xffff] has been reserved
[ 0.381696] system 00:00: [io 0xffff] has been reserved
[ 0.381697] system 00:00: [io 0xffff] has been reserved
[ 0.381699] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.381700] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.381705] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.381807] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.381840] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.381843] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.381987] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.382002] pnp 00:04: Plug and Play ACPI device, IDs DLL075b PNP0f13 (active)
[ 0.382222] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.382224] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.382226] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.382227] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.382229] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.382230] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.382232] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.382233] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.382235] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.382237] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.382240] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.382275] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.382277] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.382278] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.382280] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.382281] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.382283] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.382285] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.382289] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.382594] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.382597] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.383716] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.383718] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.383721] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.387033] pnp: PnP ACPI: found 9 devices
[ 0.394563] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.394576] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 1000
[ 0.394597] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.394600] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.394602] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.394606] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.394609] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.394614] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.394618] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
[ 0.394624] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[ 0.394628] pci 0000:00:1c.5: bridge window [mem 0xdc300000-0xdc3fffff]
[ 0.394634] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 0.394638] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.394645] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.394647] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.394648] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.394649] pci_bus 0000:00: resource 7 [mem 0x7f800000-0xdfffffff window]
[ 0.394651] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.394652] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.394653] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff]
[ 0.394655] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.394656] pci_bus 0000:3a: resource 1 [mem 0xdc000000-0xdc1fffff]
[ 0.394658] pci_bus 0000:3b: resource 1 [mem 0xdc300000-0xdc3fffff]
[ 0.394659] pci_bus 0000:3c: resource 1 [mem 0xdc200000-0xdc2fffff]
[ 0.394795] NET: Registered protocol family 2
[ 0.394923] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.395086] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.395183] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.395209] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.395246] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.395311] NET: Registered protocol family 1
[ 0.395324] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.396523] PCI: CLS 0 bytes, default 64
[ 0.396552] Unpacking initramfs...
[ 0.653647] Freeing initrd memory: 16764K
[ 0.653675] DMAR: ACPI device "device:79" under DMAR at fed91000 as 00:15.0
[ 0.653678] DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.1
[ 0.653691] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.653693] software IO TLB [mem 0x6e642000-0x72642000] (64MB) mapped at [ffff9b776e642000-ffff9b7772641fff]
[ 0.653828] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns
[ 0.653950] Scanning for low memory corruption every 60 seconds
[ 0.654482] Initialise system trusted keyrings
[ 0.654490] Key type blacklist registered
[ 0.654571] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 0.655410] zbud: loaded
[ 0.658680] Key type asymmetric registered
[ 0.658705] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.658759] io scheduler noop registered
[ 0.658759] io scheduler deadline registered
[ 0.658791] io scheduler cfq registered (default)
[ 0.658792] io scheduler mq-deadline registered
[ 0.658793] io scheduler kyber registered
[ 0.658809] io scheduler bfq registered
[ 0.659700] pcieport 0000:00:1c.0: AER enabled with IRQ 122
[ 0.659729] pcieport 0000:00:1c.4: AER enabled with IRQ 123
[ 0.659755] pcieport 0000:00:1c.5: AER enabled with IRQ 124
[ 0.659782] pcieport 0000:00:1d.0: AER enabled with IRQ 125
[ 0.659805] efifb: probing for efifb
[ 0.659816] efifb: framebuffer at 0x90000000, using 8128k, total 8128k
[ 0.659817] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.659817] efifb: scrolling: redraw
[ 0.659819] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.663808] Console: switching to colour frame buffer device 240x67
[ 0.667702] fb0: EFI VGA frame buffer device
[ 0.667709] intel_idle: MWAIT substates: 0x11142120
[ 0.667710] intel_idle: v0.4.1 model 0x8E
[ 0.667898] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.668174] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.668999] rtc_cmos 00:01: RTC can wake from S4
[ 0.669394] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.669479] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.669489] intel_pstate: Intel P-state driver initializing
[ 0.669839] intel_pstate: HWP enabled
[ 0.669934] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.669974] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[ 0.669985] intel_pmc_core 0000:00:1f.2: enabling device (0000 -> 0002)
[ 0.670194] NET: Registered protocol family 10
[ 0.673234] Segment Routing with IPv6
[ 0.673247] NET: Registered protocol family 17
[ 0.673558] RAS: Correctable Errors collector initialized.
[ 0.673574] microcode: sig=0x806e9, pf=0x40, revision=0x80
[ 0.673662] microcode: Microcode Update Driver: v2.2.
[ 0.673668] sched_clock: Marking stable (673659604, 0)->(678882746, -5223142)
[ 0.673953] registered taskstats version 1
[ 0.673957] Loading compiled-in X.509 certificates
[ 0.673968] zswap: loaded using pool lzo/zbud
[ 0.676046] Key type big_key registered
[ 0.677505] Magic number: 2:351:250
[ 0.677547] memory memory124: hash matches
[ 0.677696] rtc_cmos 00:01: setting system clock to 2018-01-25 22:13:58 UTC (1516918438)
[ 0.679076] Freeing unused kernel memory: 1360K
[ 0.679077] Write protecting the kernel read-only data: 16384k
[ 0.679421] Freeing unused kernel memory: 2016K
[ 0.681023] Freeing unused kernel memory: 1304K
[ 0.705154] device-mapper: uevent: version 1.0.3
[ 0.705200] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 0.750133] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.752025] i8042: Warning: Keylock active
[ 0.754304] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.754327] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.765588] ACPI: bus type USB registered
[ 0.765606] usbcore: registered new interface driver usbfs
[ 0.765611] usbcore: registered new interface driver hub
[ 0.765618] rtsx_pci 0000:3b:00.0: enabling device (0000 -> 0002)
[ 0.765628] usbcore: registered new device driver usb
[ 0.766144] nvme nvme0: pci function 0000:3c:00.0
[ 0.768539] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.768542] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.769707] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 0.769719] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.769892] hub 1-0:1.0: USB hub found
[ 0.769926] hub 1-0:1.0: 12 ports detected
[ 0.770585] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.770587] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.770671] hub 2-0:1.0: USB hub found
[ 0.770679] hub 2-0:1.0: 6 ports detected
[ 0.771100] usb: port power management may be unreliable
[ 0.771619] AVX2 version of gcm_enc/dec engaged.
[ 0.771619] AES CTR mode by8 optimization enabled
[ 0.789252] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.980248] nvme0n1: p1 p2 p3
[ 1.100205] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 1.366877] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[ 1.677123] clocksource: Switched to clocksource tsc
[ 3.768541] CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
[ 3.768542] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
[ 3.768544] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 3.768570] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 3.768571] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 3.768658] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 3.769526] CPU2: Core temperature/speed normal
[ 3.769526] CPU0: Core temperature/speed normal
[ 3.769527] CPU2: Package temperature/speed normal
[ 3.769528] CPU0: Package temperature/speed normal
[ 3.769556] CPU1: Package temperature/speed normal
[ 3.769556] CPU3: Package temperature/speed normal
[ 4.887682] NET: Registered protocol family 38
[ 5.067530] PM: Starting manual resume from disk
[ 5.067714] PM: Image not found (code -22)
[ 5.106861] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.196498] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.203417] systemd[1]: systemd 236 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 5.220411] systemd[1]: Detected architecture x86-64.
[ 5.221097] systemd[1]: Set hostname to <syre-laptop>.
[ 5.293830] random: crng init done
[ 5.324022] systemd[1]: Created slice User and Session Slice.
[ 5.324270] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.324289] systemd[1]: Reached target Login Prompts.
[ 5.324299] systemd[1]: Reached target Remote File Systems.
[ 5.324347] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.324382] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.324392] systemd[1]: Reached target Local Encrypted Volumes.
[ 5.354420] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
[ 5.377137] SCSI subsystem initialized
[ 5.415474] vboxdrv: loading out-of-tree module taints kernel.
[ 5.462316] vboxdrv: Found 4 processor cores
[ 5.480973] vboxdrv: TSC mode is Invariant, tentative frequency 2399998302 Hz
[ 5.480979] vboxdrv: Successfully loaded version 5.2.6 (interface 0x00290000)
[ 5.498814] VBoxPciLinuxInit
[ 5.510248] vboxpci: IOMMU not found (not registered)
[ 5.516511] VBoxNetAdp: Successfully started.
[ 5.522912] systemd-journald[282]: Received request to flush runtime journal from PID 1
[ 5.523679] VBoxNetFlt: Successfully started.
[ 5.621445] ACPI: AC Adapter [AC] (off-line)
[ 5.624588] input: Intel HID events as /devices/platform/INT33D5:00/input/input3
[ 5.624987] intel-hid INT33D5:00: platform supports 5 button array
[ 5.625018] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input4
[ 5.625035] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 5.625582] ACPI: Lid Switch [LID0]
[ 5.625676] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 5.625685] ACPI: Power Button [PBTN]
[ 5.625710] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[ 5.625713] ACPI: Sleep Button [SBTN]
[ 5.625736] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 5.625743] ACPI: Power Button [PWRF]
[ 5.671992] input: Intel Virtual Button driver as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input8
[ 5.709528] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
[ 5.722658] Bluetooth: Core ver 2.22
[ 5.722680] NET: Registered protocol family 31
[ 5.722681] Bluetooth: HCI device and connection manager initialized
[ 5.722687] Bluetooth: HCI socket layer initialized
[ 5.722695] Bluetooth: L2CAP socket layer initialized
[ 5.722707] Bluetooth: SCO socket layer initialized
[ 5.723889] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.726046] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 5.738505] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 5.743367] thermal LNXTHERM:00: registered as thermal_zone5
[ 5.743369] ACPI: Thermal Zone [THM] (25 C)
[ 5.747464] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 5.757154] Linux agpgart interface v0.103
[ 5.758480] ACPI: Battery Slot [BAT0] (battery present)
[ 5.763426] Bluetooth: HCI UART driver ver 2.3
[ 5.763428] Bluetooth: HCI UART protocol H4 registered
[ 5.763429] Bluetooth: HCI UART protocol BCSP registered
[ 5.763447] Bluetooth: HCI UART protocol LL registered
[ 5.763447] Bluetooth: HCI UART protocol ATH3K registered
[ 5.763448] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 5.763473] Bluetooth: HCI UART protocol Intel registered
[ 5.763497] Bluetooth: HCI UART protocol Broadcom registered
[ 5.763498] Bluetooth: HCI UART protocol QCA registered
[ 5.763498] Bluetooth: HCI UART protocol AG6XX registered
[ 5.763499] Bluetooth: HCI UART protocol Marvell registered
[ 5.773681] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 5.773718] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 5.777337] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.777823] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 5.777852] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 5.794350] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 5.809850] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 5.810547] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 5.811020] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 5.843820] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 5.843821] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 5.843822] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 5.843823] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 5.843823] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 5.843824] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 5.892340] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: data=ordered
[ 5.900826] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 5.947260] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 5.951419] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 5.983836] Adding 8159228k swap on /dev/mapper/AntergosVG-AntergosSwap. Priority:-2 extents:1 across:8159228k SSFS
[ 6.051711] dell-wmi 9DBB5994-A997-11DA-B012-B622A1EF5492: Detected Dell WMI interface version 1
[ 6.051811] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input10
[ 6.080935] iTCO_vendor_support: vendor-support=0
[ 6.082540] Setting dangerous option enable_rc6 - tainting kernel
[ 6.082542] Setting dangerous option enable_fbc - tainting kernel
[ 6.082543] Setting dangerous option enable_guc_loading - tainting kernel
[ 6.082544] Setting dangerous option enable_guc_submission - tainting kernel
[ 6.082546] i915: unknown parameter 'enable' ignored
[ 6.082547] Setting dangerous option enable_psr - tainting kernel
[ 6.082548] Setting dangerous option disable_power_well - tainting kernel
[ 6.082944] [drm] Found 64MB of eDRAM
[ 6.084005] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.084144] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 6.085266] [drm] Memory usable by graphics device = 4078M
[ 6.085268] checking generic (90000000 7f0000) vs hw (90000000 10000000)
[ 6.085269] fb: switching to inteldrmfb from EFI VGA
[ 6.085286] Console: switching to colour dummy device 80x25
[ 6.085344] [drm] Replacing VGA console driver
[ 6.087205] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.090053] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.090055] [drm] Driver supports precise vblank timestamp query.
[ 6.092131] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.094237] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[ 6.095712] intel_rapl: Found RAPL domain package
[ 6.095714] intel_rapl: Found RAPL domain core
[ 6.095715] intel_rapl: Found RAPL domain uncore
[ 6.095715] intel_rapl: Found RAPL domain dram
[ 6.118685] [drm] GuC submission enabled (firmware i915/kbl_guc_ver9_14.bin [version 9.14])
[ 6.132515] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[ 6.133938] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.134624] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 6.134837] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 6.136471] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input13
[ 6.136817] fbcon: inteldrmfb (fb0) is primary device
[ 6.138388] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[ 6.147321] ath10k_pci 0000:3a:00.0: enabling device (0000 -> 0002)
[ 6.149222] ath10k_pci 0000:3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 6.169670] mousedev: PS/2 mouse device common for all mice
[ 6.411991] ath10k_pci 0000:3a:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:3a:00.0.bin failed with error -2
[ 6.412024] ath10k_pci 0000:3a:00.0: Direct firmware load for ath10k/cal-pci-0000:3a:00.0.bin failed with error -2
[ 6.416733] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[ 6.416738] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[ 6.418205] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00051-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 c3fd4411
[ 6.484034] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 0e26ef70
[ 6.961558] media: Linux media interface: v0.10
[ 6.973085] Linux video capture interface: v2.00
[ 7.062824] ath10k_pci 0000:3a:00.0: Unknown eventid: 118809
[ 7.067182] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118
[ 7.070141] ath10k_pci 0000:3a:00.0: htt-ver 3.44 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 7.087244] usbcore: registered new interface driver btusb
[ 7.088338] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 7.088339] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[ 7.101974] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:568b)
[ 7.107981] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 7.107983] uvcvideo 1-5:1.0: Entity type for entity Extension 7 was not initialized!
[ 7.107984] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 7.107985] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 7.108067] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input18
[ 7.108150] usbcore: registered new interface driver uvcvideo
[ 7.108150] USB Video Class driver (1.1.1)
[ 7.117394] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 7.151899] ath: EEPROM regdomain: 0x6c
[ 7.151900] ath: EEPROM indicates we should expect a direct regpair map
[ 7.151902] ath: Country alpha2 being used: 00
[ 7.151903] ath: Regpair used: 0x6c
[ 7.165461] ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0
[ 7.279015] Console: switching to colour frame buffer device 240x67
[ 7.308569] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.360349] [drm] RC6 on
[ 7.427291] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 7.427299] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.427306] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 7.427311] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 7.427315] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 7.427321] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 7.427327] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 7.427332] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 7.441532] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.441536] Bluetooth: BNEP filters: protocol multicast
[ 7.441544] Bluetooth: BNEP socket layer initialized
[ 7.499952] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 7.502206] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 7.502408] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 7.502582] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[ 7.502763] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[ 7.502942] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[ 7.503109] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[ 7.865702] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 8.576765] ath10k_pci 0000:3a:00.0: Unknown eventid: 118809
[ 8.580060] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118
[ 8.629225] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 8.629283] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 8.715441] Bridge firewalling registered
[ 8.761123] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 9.438809] ath10k_pci 0000:3a:00.0: Unknown eventid: 118809
[ 9.441823] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118
[ 9.483932] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 9.602201] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 9.645325] Initializing XFRM netlink socket
[ 9.654910] Netfilter messages via NETLINK v0.30.
[ 9.660781] ctnetlink v0.93: registering with nfnetlink.
[ 9.919281] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ 10.708452] Bluetooth: RFCOMM TTY layer initialized
[ 10.708457] Bluetooth: RFCOMM socket layer initialized
[ 10.708461] Bluetooth: RFCOMM ver 1.11
[ 14.524933] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 19.437566] wlp58s0: authenticate with 62:38:e0:da:45:80
[ 19.481404] wlp58s0: send auth to 62:38:e0:da:45:80 (try 1/3)
[ 19.482174] wlp58s0: authenticated
[ 19.483347] wlp58s0: associate with 62:38:e0:da:45:80 (try 1/3)
[ 19.493249] wlp58s0: RX AssocResp from 62:38:e0:da:45:80 (capab=0x11 status=0 aid=5)
[ 19.495797] wlp58s0: associated
[ 19.498673] ath: EEPROM regdomain: 0x8114
[ 19.498675] ath: EEPROM indicates we should expect a country code
[ 19.498675] ath: doing EEPROM country->regdmn map search
[ 19.498676] ath: country maps to regdmn code: 0x37
[ 19.498676] ath: Country alpha2 being used: DE
[ 19.498677] ath: Regpair used: 0x37
[ 19.498677] ath: regdomain 0x8114 dynamically updated by country IE
[ 19.505174] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready
[ 24.440348] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[ 27.390081] Bluetooth: hci0 urb ffff9b7b5c6b9600 failed to resubmit (113)
[ 37.407677] Bluetooth: hci0 urb ffff9b7b5c6b9180 failed to resubmit (113)
[ 47.192889] Bluetooth: hci0 urb ffff9b7b5c6b9840 failed to resubmit (113)
[ 132.206272] Bluetooth: hci0 urb ffff9b7b67b44f00 failed to resubmit (113)
[ 150.128103] Bluetooth: hci0 urb ffff9b7b687de9c0 failed to resubmit (113)
[ 222.019293] Bluetooth: hci0 urb ffff9b7b67b440c0 failed to resubmit (113)
[ 388.190883] Bluetooth: hci0 urb ffff9b7b687def00 failed to resubmit (113)
● bluetooth.service - Bluetooth service
Loaded: loaded (/usr/lib/systemd/system/bluetooth.service; enabled; vendor preset: disabled)
Active: active (running) since Thu 2018-01-25 23:14:05 CET; 18min ago
Docs: man:bluetoothd(8)
Main PID: 566 (bluetoothd)
Status: "Running"
Tasks: 1 (limit: 4915)
CGroup: /system.slice/bluetooth.service
└─566 /usr/lib/bluetooth/bluetoothd
Jan 25 23:14:42 syre-laptop bluetoothd[566]: Failed to set mode: Failed (0x03)
Jan 25 23:14:53 syre-laptop bluetoothd[566]: Failed to set mode: Failed (0x03)
Jan 25 23:15:59 syre-laptop bluetoothd[566]: Endpoint unregistered: sender=:1.30 path=/MediaEndpoint/A2DPSource
Jan 25 23:15:59 syre-laptop bluetoothd[566]: Endpoint unregistered: sender=:1.30 path=/MediaEndpoint/A2DPSink
Jan 25 23:16:00 syre-laptop bluetoothd[566]: Endpoint registered: sender=:1.123 path=/MediaEndpoint/A2DPSource
Jan 25 23:16:00 syre-laptop bluetoothd[566]: Endpoint registered: sender=:1.123 path=/MediaEndpoint/A2DPSink
Jan 25 23:16:17 syre-laptop bluetoothd[566]: Failed to set mode: Failed (0x03)
Jan 25 23:16:36 syre-laptop bluetoothd[566]: Failed to set mode: Failed (0x03)
Jan 25 23:17:47 syre-laptop bluetoothd[566]: Failed to set mode: Failed (0x03)
Jan 25 23:20:34 syre-laptop bluetoothd[566]: Failed to set mode: Failed (0x03)
Last edited by syre (2018-01-25 22:32:41)
Offline
I created complex script to toggle and connect to my bluetooth devices with a keypress. I had the same problem. I couldn't power the device with bluetoothctl no matter what. I solved it with:
rfkill block bluetooth
sleep 1
rfkill unblock bluetooth
then "power on" with bluetoothctl and connect
Offline
tuxfusion, thank you for your contribution to this thread. However, please do not necrobump old threads in the future, since I doubt the original poster is still looking for a solution.
Offline
Pages: 1