You are not logged in.

#1 2018-03-01 07:37:19

tydynrain
Member
From: Puna District, Pāhoa, Hawai'i
Registered: 2017-10-26
Posts: 66
Website

[SOLVED] Random Logout and Hard Freeze with Recent Kernels...

Hello fellow Archers.

I think this is the correct location for this, as it definitely seems kernel related. Random GUI lockups have been with me sporadically since I've been with Arch (the random logouts are more recent), though it has not been consistent. It usually seems to be related to particular kernel versions, as with some versions this behavior does not seem to exist for me, on either my laptop or my desktop systems, both of which have Intel Core CPUs (i3 on the desktop and i5 on the laptop) and Integrated Intel Graphics cards.

Two times before I was able to resolve the situation, once by setting particular kernel parameters (intel_iommu=off intel_iommu=igfx_off), and the second time by removing the xf86-video-intel driver and the Intel video config file in /etc/X11/xorg.conf.d, and simply using xorg's modsetting driver.

Now, however, the two very annoying and frustrating behaviors have returned in force, though far more on the desktop system than the laptop, with the 4.15.4, 4.15.5, and the 4.15.6 kernels, across Arch's default kernel, the Zen kernel, the PF kernel, and surprisingly, even the present LTS kernels (4.14.21 and 4.14.22).

Usually there is nothing to go on in the xorg logs, however, this time something popped up, at the very end of the last session's (which locked up, requiring yet another hard reboot) log:

[ 19016.543] (EE) client bug: timer event5 debounce: offset negative (-1ms)
[ 19016.822] (EE) client bug: timer event5 debounce: offset negative (-170ms)
[ 19016.822] (EE) client bug: timer event5 debounce short: offset negative (-183ms)

I've been searching extensively online for any actual resolution to these issues, without lasting success it would seem. If anyone has any insights, suggestions, or advice, I'm definitely listening.

Thank you for reading my post, and any replies that happen to come.

EDIT: Two things that I realized a bit later that I should mention about my setups is that I use the BFQ I/O scheduler and Zram via the systemd-swap package.

Tydyn.

Last edited by tydynrain (2018-03-12 03:14:49)


Registered Linux User: #623501 | Arch Linux Principles: Simplicity - Modernity - Pragmatism - User Centrality - Versatility => KISS

"Open source isn’t an exclusive club; it’s made by people just like you. 'Open Source' is just a fancy term for treating the world’s problems as fixable." - From GitHub.com's 'How to Contribute to Open Source' guide.

Offline

#2 2018-03-01 17:01:05

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 5,240

Re: [SOLVED] Random Logout and Hard Freeze with Recent Kernels...

Check/post your dmesg, if it is a kernel driver issue that is the most likely place where something would pop up. Look for coredumps of crashing processes I'd also try to rule out those two things you mention and particularly zram, since the spectre/meltdown patches required significant changes in the memory handling code.

Side note. Mentioning i3 and i5 is completely useless for debugging, these names have been in circulation for 10 years and are only useful for taking a guess at the numbers of cores/threads involved. Always state the exact model.

Offline

#3 2018-03-01 20:01:34

tydynrain
Member
From: Puna District, Pāhoa, Hawai'i
Registered: 2017-10-26
Posts: 66
Website

Re: [SOLVED] Random Logout and Hard Freeze with Recent Kernels...

V1del wrote:

Check/post your dmesg, if it is a kernel driver issue that is the most likely place where something would pop up. Look for coredumps of crashing processes I'd also try to rule out those two things you mention and particularly zram, since the spectre/meltdown patches required significant changes in the memory handling code.

Side note. Mentioning i3 and i5 is completely useless for debugging, these names have been in circulation for 10 years and are only useful for taking a guess at the numbers of cores/threads involved. Always state the exact model.

Thank you V1del.

There doesn't appear to be anything in coredump:

[root@The-Nexus-Tribe tydynrain]# coredumpctl list
TIME                            PID   UID   GID SIG COREFILE  EXE
Thu 2018-01-18 01:41:58 PST     995  1000   987  11 missing   /usr/lib/firefox/firefox
Thu 2018-01-18 01:42:21 PST     580  1000   987  11 missing   /usr/lib/bamf/bamfdaemon
Thu 2018-01-18 01:43:50 PST    1112  1000   987  11 missing   /usr/lib/firefox/firefox
Thu 2018-01-18 17:38:46 PST    1083  1000   987  11 missing   /usr/bin/nm-applet
Thu 2018-01-18 17:38:46 PST     383     0     0  11 missing   /usr/bin/NetworkManager
Thu 2018-01-18 17:39:05 PST     960  1000   987  11 missing   /usr/lib/bamf/bamfdaemon
Thu 2018-01-18 17:39:11 PST   27292  1000   987  11 missing   minergate
Thu 2018-01-18 17:39:12 PST     737  1000   987  11 missing   /usr/bin/startdde
Thu 2018-01-18 17:39:12 PST     820  1000   987  11 missing   /usr/lib/deepin-daemon/dde-session-initializer
Thu 2018-01-18 17:39:12 PST    1078  1000   987  11 missing   /usr/bin/plank
Thu 2018-01-18 17:39:13 PST    1074  1000   987  11 missing   /usr/lib/polkit-1-dde/dde-polkit-agent
Thu 2018-01-18 17:39:13 PST    1230  1000   987  11 missing   /usr/lib/deepin-daemon/dde-osd
Thu 2018-01-18 17:39:14 PST     811  1000   987  11 missing   /usr/lib/deepin-notifications/deepin-notifications
Thu 2018-01-18 17:39:14 PST    7566  1000   987   6 missing   /usr/bin/dde-launcher
Thu 2018-01-18 17:39:15 PST    1085  1000   987  11 missing   /usr/bin/dde-file-manager
Thu 2018-01-18 17:39:15 PST     813  1000   987  11 missing   /usr/bin/dde-desktop
Thu 2018-01-18 17:39:15 PST    7639  1000   987   6 missing   /usr/bin/tixati
Fri 2018-01-19 02:53:44 PST   27352     0     0  11 missing   /usr/lib/xorg-server/Xorg
Fri 2018-01-19 02:54:03 PST   28392  1000   987  11 missing   /usr/bin/tixati
Sat 2018-01-20 02:54:22 PST    2292     0     0  11 missing   /usr/lib/xorg-server/Xorg
Sat 2018-01-20 02:54:29 PST    9652  1000   987  11 missing   /usr/lib/gvfs/gvfsd-fuse
Sat 2018-01-20 02:54:30 PST     909     0     0  11 missing   /usr/lib/deepin-daemon/dde-system-daemon
Sun 2018-01-21 15:01:02 PST     443     0     0  11 missing   /usr/lib/xorg-server/Xorg
Mon 2018-01-22 03:53:31 PST   27200  1000   987  11 missing   /usr/lib/firefox-developer-edition/firefox
Mon 2018-01-22 22:43:30 PST     422     0     0  11 missing   /usr/lib/accountsservice/accounts-daemon
Tue 2018-01-23 14:01:49 PST    1060     0     0  11 missing   /usr/lib/deepin-daemon/dde-system-daemon
Tue 2018-01-23 14:26:25 PST   29148     0     0  11 missing   /usr/lib/deepin-daemon/dde-system-daemon
Wed 2018-01-24 03:48:14 PST    4337  1000   987  11 missing   /usr/lib/firefox-developer-edition/firefox
Sun 2018-01-28 11:08:20 PST    1210  1000   987  11 missing   /usr/lib/bamf/bamfdaemon
Sun 2018-01-28 11:08:43 PST   31551  1000   987  11 missing   /opt/firefox-nightly/firefox
Mon 2018-01-29 10:44:15 PST   30892  1000   987  11 missing   /usr/lib/bamf/bamfdaemon
Wed 2018-01-31 11:06:58 PST   13373  1000   987  11 missing   /opt/firefox-nightly/firefox
Thu 2018-02-01 00:06:29 PST   25486  1000   987  11 missing   /opt/firefox-nightly/firefox
lines 1-34

And here is the dmesg output:

[root@The-Nexus-Tribe tydynrain]# dmesg
[    0.000000] microcode: microcode updated early to revision 0x29, date = 2013-06-12
[    0.000000] Linux version 4.15.6-1-ARCH (builduser@heftig-12497) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Sun Feb 25 12:53:23 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e193c728-6c0f-458c-920d-43c1a6a776e5 rw resume=UUID=a9cbdc53-61b5-4d67-a53f-2fe94d97e039 quiet splash scsi_mod.use_blk_mq=1 i915.enable_guc_loading=1 i915.enable_guc_submission=1 zswap.enabled=1 zswap.compressor=lz4 zswap.max_pool_percent=25 zswap.zpool=z3fold
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d830cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d830d000-0x00000000d8acafff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d8acb000-0x00000000d8ad6fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000d8ad7000-0x00000000d8b61fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d8b62000-0x00000000d8b67fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000d8b68000-0x00000000d8c09fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d8c0a000-0x00000000d8d1afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d8d1b000-0x00000000d9360fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d9361000-0x00000000d943dfff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000d943e000-0x00000000d943efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d943f000-0x00000000d9481fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d9482000-0x00000000d9d32fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d9d33000-0x00000000d9ff1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d9ff2000-0x00000000d9ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0xd8acb000  ACPI 2.0=0xd8acb000  SMBIOS=0xd935f518 
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard s5-1414/2ADA, BIOS 8.07 08/29/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FE0000000 write-back
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0DB000000 mask FFF000000 uncachable
[    0.000000]   5 base 11FE00000 mask FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 4014M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 128M 	num_reg: 7  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xda000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 98000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x6463a000, 0x6463afff] PGTABLE
[    0.000000] BRK [0x6463b000, 0x6463bfff] PGTABLE
[    0.000000] BRK [0x6463c000, 0x6463cfff] PGTABLE
[    0.000000] BRK [0x6463d000, 0x6463dfff] PGTABLE
[    0.000000] BRK [0x6463e000, 0x6463efff] PGTABLE
[    0.000000] BRK [0x6463f000, 0x6463ffff] PGTABLE
[    0.000000] BRK [0x64640000, 0x64640fff] PGTABLE
[    0.000000] BRK [0x64641000, 0x64641fff] PGTABLE
[    0.000000] BRK [0x64642000, 0x64642fff] PGTABLE
[    0.000000] BRK [0x64643000, 0x64643fff] PGTABLE
[    0.000000] BRK [0x64644000, 0x64644fff] PGTABLE
[    0.000000] BRK [0x64645000, 0x64645fff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x36a57000-0x37522fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000D8ACB000 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x00000000D8ACB078 000074 (v01 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000D8AD4A10 0000F4 (v04 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000D8ACB180 00988C (v02 HPQOEM SLIC-CPC 00000807 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000D8D19F80 000040
[    0.000000] ACPI: APIC 0x00000000D8AD4B08 000072 (v03 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000D8AD4B80 000044 (v01 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000D8AD4BC8 00003C (v01 HPQOEM SLIC-CPC 01072009 MSFT 00000097)
[    0.000000] ACPI: MSDM 0x00000000D8AD4C08 000055 (v03 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.000000] ACPI: HPET 0x00000000D8AD4C60 000038 (v01 HPQOEM SLIC-CPC 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000D8AD4C98 00036D (v01 HPQOEM SLIC-CPC 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000D8AD5008 0009AA (v01 HPQOEM SLIC-CPC 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000D8AD59B8 000A92 (v01 HPQOEM SLIC-CPC 00003000 INTL 20051117)
[    0.000000] ACPI: DBGP 0x00000000D8AD6450 000034 (v01 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x11fdfb000-0x11fdfdfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000011fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000d830cfff]
[    0.000000]   node   0: [mem 0x00000000d8b68000-0x00000000d8c09fff]
[    0.000000]   node   0: [mem 0x00000000d943e000-0x00000000d943efff]
[    0.000000]   node   0: [mem 0x00000000d9482000-0x00000000d9d32fff]
[    0.000000]   node   0: [mem 0x00000000d9ff2000-0x00000000d9ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fdfffff]
[    0.000000] On node 0 totalpages: 1017356
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 157 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13794 pages used for memmap
[    0.000000]   DMA32 zone: 882799 pages, LIFO batch:31
[    0.000000]   Normal zone: 2040 pages used for memmap
[    0.000000]   Normal zone: 130560 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 104 pages
[    0.000000] Reserving Intel graphics memory at 0x00000000db200000-0x00000000df1fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd830d000-0xd8acafff]
[    0.000000] PM: Registered nosave memory: [mem 0xd8acb000-0xd8ad6fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd8ad7000-0xd8b61fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd8b62000-0xd8b67fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd8c0a000-0xd8d1afff]
[    0.000000] PM: Registered nosave memory: [mem 0xd8d1b000-0xd9360fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd9361000-0xd943dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xd943f000-0xd9481fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd9d33000-0xd9ff1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @        (ptrval) s147456 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s147456 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1001301
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e193c728-6c0f-458c-920d-43c1a6a776e5 rw resume=UUID=a9cbdc53-61b5-4d67-a53f-2fe94d97e039 quiet splash scsi_mod.use_blk_mq=1 i915.enable_guc_loading=1 i915.enable_guc_submission=1 zswap.enabled=1 zswap.compressor=lz4 zswap.max_pool_percent=25 zswap.zpool=z3fold
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3855252K/4069424K available (10252K kernel code, 1250K rwdata, 3224K rodata, 1432K init, 632K bss, 214172K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 31419 entries in 123 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: .
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.005000] tsc: Fast TSC calibration using PIT
[    0.006000] tsc: Detected 3392.299 MHz processor
[    0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.59 BogoMIPS (lpj=3392299)
[    0.006000] pid_max: default: 32768 minimum: 301
[    0.007577] Security Framework initialized
[    0.007578] Yama: becoming mindful.
[    0.008371] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.008850] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.008876] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.008891] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.009080] CPU: Physical Processor ID: 0
[    0.009080] CPU: Processor Core ID: 0
[    0.009085] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.009086] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.009089] mce: CPU supports 7 MCE banks
[    0.009095] CPU0: Thermal monitoring enabled (TM1)
[    0.009102] process: using mwait in idle threads
[    0.009105] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.009105] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.009107] Spectre V2 : Mitigation: Full generic retpoline
[    0.009183] Freeing SMP alternatives memory: 24K
[    0.011855] TSC deadline timer enabled
[    0.011858] smpboot: CPU0: Intel(R) Core(TM) i3-2130 CPU @ 3.40GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.015012] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.015045] ... version:                3
[    0.015046] ... bit width:              48
[    0.015047] ... generic registers:      4
[    0.015049] ... value mask:             0000ffffffffffff
[    0.015050] ... max period:             00007fffffffffff
[    0.015051] ... fixed-purpose events:   3
[    0.015052] ... event mask:             000000070000000f
[    0.017005] Hierarchical SRCU implementation.
[    0.023125] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.025004] smp: Bringing up secondary CPUs ...
[    0.034018] x86: Booting SMP configuration:
[    0.034020] .... node  #0, CPUs:      #1 #2 #3
[    0.055027] smp: Brought up 1 node, 4 CPUs
[    0.055027] smpboot: Max logical packages: 1
[    0.055027] smpboot: Total of 4 processors activated (27138.39 BogoMIPS)
[    0.056216] devtmpfs: initialized
[    0.056216] x86/mm: Memory block size: 128MB
[    0.056356] PM: Registering ACPI NVS region [mem 0xd8c0a000-0xd8d1afff] (1118208 bytes)
[    0.056356] PM: Registering ACPI NVS region [mem 0xd943f000-0xd9481fff] (274432 bytes)
[    0.056356] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.056356] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.056356] pinctrl core: initialized pinctrl subsystem
[    0.056356] RTC time:  7:00:28, date: 03/01/18
[    0.056356] NET: Registered protocol family 16
[    0.057117] cpuidle: using governor ladder
[    0.057117] cpuidle: using governor menu
[    0.057117] ACPI: bus type PCI registered
[    0.057117] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.057117] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.057117] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.057117] PCI: Using configuration type 1 for base access
[    0.057151] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.058023] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.058056] ACPI: Added _OSI(Module Device)
[    0.058057] ACPI: Added _OSI(Processor Device)
[    0.058058] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.058058] ACPI: Added _OSI(Processor Aggregator Device)
[    0.058216] ACPI: Executed 1 blocks of module-level executable AML code
[    0.063512] ACPI: Dynamic OEM Table Load:
[    0.063517] ACPI: SSDT 0xFFFF92851A75F000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.063644] ACPI: Dynamic OEM Table Load:
[    0.063644] ACPI: SSDT 0xFFFF92851A6C9000 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.064186] ACPI: Dynamic OEM Table Load:
[    0.064186] ACPI: SSDT 0xFFFF92851A715C00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.065239] ACPI: Interpreter enabled
[    0.065257] ACPI: (supports S0 S3 S4 S5)
[    0.065258] ACPI: Using IOAPIC for interrupt routing
[    0.065281] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.065518] ACPI: Enabled 14 GPEs in block 00 to 3F
[    0.072806] ACPI: Power Resource [FN00] (off)
[    0.072881] ACPI: Power Resource [FN01] (off)
[    0.072957] ACPI: Power Resource [FN02] (off)
[    0.073035] ACPI: Power Resource [FN03] (off)
[    0.073108] ACPI: Power Resource [FN04] (off)
[    0.073628] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.073633] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.073904] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.074078] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.074541] PCI host bridge to bus 0000:00
[    0.074543] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.074544] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.074545] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.074546] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.074548] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.074549] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.074550] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.074551] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.074552] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.074553] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.074554] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.074555] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.074556] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.074558] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.074559] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.074560] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[    0.074561] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.074568] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.074662] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.074690] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.074772] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[    0.074781] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.074785] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.074788] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.074797] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.074911] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.074936] pci 0000:00:16.0: reg 0x10: [mem 0xf7f0a000-0xf7f0a00f 64bit]
[    0.075009] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.075098] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.075120] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f08000-0xf7f083ff]
[    0.075201] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.075285] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.075304] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f00000-0xf7f03fff 64bit]
[    0.075366] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.075458] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.075597] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.075702] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.075840] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.075938] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[    0.076019] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.076110] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.076132] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f07000-0xf7f073ff]
[    0.076213] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.076297] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.076477] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.076494] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.076501] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.076508] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.076515] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.076523] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.076530] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f06000-0xf7f067ff]
[    0.076569] pci 0000:00:1f.2: PME# supported from D3hot
[    0.076645] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.076663] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f05000-0xf7f050ff 64bit]
[    0.076682] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.076799] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.076893] pci 0000:02:00.0: [104c:8241] type 00 class 0x0c0330
[    0.076947] pci 0000:02:00.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
[    0.076975] pci 0000:02:00.0: reg 0x18: [mem 0xf7e10000-0xf7e11fff 64bit]
[    0.077153] pci 0000:02:00.0: supports D1 D2
[    0.077154] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.080040] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.080051] pci 0000:00:1c.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.080175] pci 0000:03:00.0: [1814:539b] type 00 class 0x028000
[    0.080217] pci 0000:03:00.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff]
[    0.084051] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.084062] pci 0000:00:1c.1:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.084144] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.084178] pci 0000:04:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.084212] pci 0000:04:00.0: reg 0x18: [mem 0xf7c04000-0xf7c04fff 64bit pref]
[    0.084233] pci 0000:04:00.0: reg 0x20: [mem 0xf7c00000-0xf7c03fff 64bit pref]
[    0.084352] pci 0000:04:00.0: supports D1 D2
[    0.084353] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.088033] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.088040] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[    0.088046] pci 0000:00:1c.5:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.088521] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.088583] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.088644] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.088705] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.088768] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.088829] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.088889] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.088949] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.090021] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.090021] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.090021] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.090021] vgaarb: loaded
[    0.090128] EDAC MC: Ver: 3.0.0
[    0.090211] Registered efivars operations
[    0.098015] PCI: Using ACPI for IRQ routing
[    0.098991] PCI: pci_cache_line_size set to 64 bytes
[    0.099078] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.099079] e820: reserve RAM buffer [mem 0xd830d000-0xdbffffff]
[    0.099081] e820: reserve RAM buffer [mem 0xd8c0a000-0xdbffffff]
[    0.099082] e820: reserve RAM buffer [mem 0xd943f000-0xdbffffff]
[    0.099083] e820: reserve RAM buffer [mem 0xd9d33000-0xdbffffff]
[    0.099084] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
[    0.099085] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[    0.100002] NetLabel: Initializing
[    0.100002] NetLabel:  domain hash size = 128
[    0.100002] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.100002] NetLabel:  unlabeled traffic allowed by default
[    0.100370] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.100375] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.102019] clocksource: Switched to clocksource hpet
[    0.110055] VFS: Disk quotas dquot_6.6.0
[    0.110070] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.110134] pnp: PnP ACPI init
[    0.110248] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.110253] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.110331] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.110333] system 00:01: [io  0x1000-0x100f] has been reserved
[    0.110335] system 00:01: [io  0xffff] has been reserved
[    0.110336] system 00:01: [io  0xffff] has been reserved
[    0.110337] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.110339] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.110340] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.110341] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.110345] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.110366] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.110411] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.110415] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.110546] system 00:04: [io  0x0a00-0x0a1f] has been reserved
[    0.110547] system 00:04: [io  0x0a20-0x0a2f] has been reserved
[    0.110549] system 00:04: [io  0x0a30-0x0a3f] has been reserved
[    0.110552] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.110623] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.110626] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.110861] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.110863] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.110864] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.110866] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.110867] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.110869] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.110870] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.110871] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.110873] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.110874] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.110876] system 00:06: [mem 0xdf200000-0xdf200fff] has been reserved
[    0.110879] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.111063] system 00:07: [mem 0x20000000-0x201fffff] has been reserved
[    0.111064] system 00:07: [mem 0x40000000-0x401fffff] has been reserved
[    0.111067] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.111086] pnp: PnP ACPI: found 8 devices
[    0.117063] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.117102] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.117107] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.117114] pci 0000:00:1c.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.117126] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.117132] pci 0000:00:1c.1:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.117144] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.117147] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[    0.117152] pci 0000:00:1c.5:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.117160] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.117161] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.117163] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.117164] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.117165] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.117166] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.117167] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.117168] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.117170] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.117171] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.117172] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.117173] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.117174] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.117175] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.117177] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.117178] pci_bus 0000:00: resource 19 [mem 0xdf200000-0xfeafffff window]
[    0.117179] pci_bus 0000:02: resource 1 [mem 0xf7e00000-0xf7efffff]
[    0.117180] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    0.117182] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.117183] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.117272] NET: Registered protocol family 2
[    0.117386] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.117457] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.117554] TCP: Hash tables configured (established 32768 bind 32768)
[    0.117581] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.117595] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.117634] NET: Registered protocol family 1
[    0.117655] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.150294] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.150328] Unpacking initramfs...
[    0.261718] Freeing initrd memory: 11056K
[    0.261722] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.261725] software IO TLB [mem 0xd134e000-0xd534e000] (64MB) mapped at [00000000f78db963-00000000790f8117]
[    0.261896] Scanning for low memory corruption every 60 seconds
[    0.262311] Initialise system trusted keyrings
[    0.262320] Key type blacklist registered
[    0.262380] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[    0.263137] zbud: loaded
[    0.264821] Key type asymmetric registered
[    0.264822] Asymmetric key parser 'x509' registered
[    0.264842] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.264876] io scheduler noop registered
[    0.264876] io scheduler deadline registered
[    0.264905] io scheduler cfq registered (default)
[    0.264906] io scheduler mq-deadline registered
[    0.264906] io scheduler kyber registered
[    0.264921] io scheduler bfq registered
[    0.265552] efifb: probing for efifb
[    0.265564] efifb: framebuffer at 0xe0000000, using 5120k, total 5120k
[    0.265564] efifb: mode is 1280x1024x32, linelength=5120, pages=1
[    0.265565] efifb: scrolling: redraw
[    0.265566] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.267689] Console: switching to colour frame buffer device 160x64
[    0.269727] fb0: EFI VGA frame buffer device
[    0.269734] intel_idle: MWAIT substates: 0x1120
[    0.269735] intel_idle: v0.4.1 model 0x2A
[    0.269854] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.269905] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.269933] ACPI: Power Button [PWRB]
[    0.269963] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.269983] ACPI: Power Button [PWRF]
[    0.270668] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.270809] thermal LNXTHERM:00: registered as thermal_zone0
[    0.270810] ACPI: Thermal Zone [TZ00] (28 C)
[    0.271070] thermal LNXTHERM:01: registered as thermal_zone1
[    0.271071] ACPI: Thermal Zone [TZ01] (30 C)
[    0.271187] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.271891] intel_pstate: Intel P-state driver initializing
[    0.272027] ledtrig-cpu: registered to indicate activity on CPUs
[    0.272348] NET: Registered protocol family 10
[    0.278311] Segment Routing with IPv6
[    0.278342] NET: Registered protocol family 17
[    0.278989] RAS: Correctable Errors collector initialized.
[    0.279061] microcode: sig=0x206a7, pf=0x2, revision=0x29
[    0.279218] microcode: Microcode Update Driver: v2.2.
[    0.279238] sched_clock: Marking stable (279198022, 0)->(281425857, -2227835)
[    0.279596] registered taskstats version 1
[    0.279605] Loading compiled-in X.509 certificates
[    0.282786] zswap: loaded using pool lz4/z3fold
[    0.286806] Key type big_key registered
[    0.287159]   Magic number: 10:755:14
[    0.287221] hctosys: unable to open rtc device (rtc0)
[    0.289479] Freeing unused kernel memory: 1432K
[    0.289481] Write protecting the kernel read-only data: 16384k
[    0.290098] Freeing unused kernel memory: 2016K
[    0.292210] Freeing unused kernel memory: 872K
[    0.338357] Linux agpgart interface v0.103
[    0.373818] Setting dangerous option enable_guc_loading - tainting kernel
[    0.373821] Setting dangerous option enable_guc_submission - tainting kernel
[    0.374509] [drm] Ignoring GuC options, no hardware
[    0.374518] [drm] Memory usable by graphics device = 2048M
[    0.374519] checking generic (e0000000 500000) vs hw (e0000000 10000000)
[    0.374520] fb: switching to inteldrmfb from EFI VGA
[    0.374538] Console: switching to colour dummy device 80x25
[    0.374619] [drm] Replacing VGA console driver
[    0.380444] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.380445] [drm] Driver supports precise vblank timestamp query.
[    0.382806] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.387731] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    0.388726] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    0.389238] acpi device:4a: registered as cooling_device9
[    0.389351] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[    0.569732] fbcon: inteldrmfb (fb0) is primary device
[    0.641192] Console: switching to colour frame buffer device 160x64
[    0.662339] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    0.739433] ACPI: bus type USB registered
[    0.739462] usbcore: registered new interface driver usbfs
[    0.739472] usbcore: registered new interface driver hub
[    0.739500] usbcore: registered new device driver usb
[    0.741094] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.741179] SCSI subsystem initialized
[    0.744346] ehci-pci: EHCI PCI platform driver
[    0.744640] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.744650] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[    0.744866] xhci_hcd 0000:02:00.0: hcc params 0x0270f06d hci version 0x96 quirks 0x04000000
[    0.745178] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.745180] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.745182] usb usb1: Product: xHCI Host Controller
[    0.745184] usb usb1: Manufacturer: Linux 4.15.6-1-ARCH xhci-hcd
[    0.745185] usb usb1: SerialNumber: 0000:02:00.0
[    0.745310] hub 1-0:1.0: USB hub found
[    0.745326] hub 1-0:1.0: 2 ports detected
[    0.745458] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.745462] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    0.745489] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.745522] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.745525] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.745527] usb usb2: Product: xHCI Host Controller
[    0.745530] usb usb2: Manufacturer: Linux 4.15.6-1-ARCH xhci-hcd
[    0.745532] usb usb2: SerialNumber: 0000:02:00.0
[    0.745546] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.745631] hub 2-0:1.0: USB hub found
[    0.745646] hub 2-0:1.0: 2 ports detected
[    0.745847] libata version 3.00 loaded.
[    0.745895] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.745910] ehci-pci 0000:00:1a.0: debug port 2
[    0.749815] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.749835] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f08000
[    0.756030] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.756107] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.756110] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.756111] usb usb3: Product: EHCI Host Controller
[    0.756113] usb usb3: Manufacturer: Linux 4.15.6-1-ARCH ehci_hcd
[    0.756115] usb usb3: SerialNumber: 0000:00:1a.0
[    0.756261] hub 3-0:1.0: USB hub found
[    0.756271] hub 3-0:1.0: 2 ports detected
[    0.756678] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.756684] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    0.756698] ehci-pci 0000:00:1d.0: debug port 2
[    0.760617] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.760632] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f07000
[    0.767018] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.767068] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    0.767070] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.767071] usb usb4: Product: EHCI Host Controller
[    0.767073] usb usb4: Manufacturer: Linux 4.15.6-1-ARCH ehci_hcd
[    0.767074] usb usb4: SerialNumber: 0000:00:1d.0
[    0.767195] hub 4-0:1.0: USB hub found
[    0.767204] hub 4-0:1.0: 2 ports detected
[    0.767431] ahci 0000:00:1f.2: version 3.0
[    0.777716] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x11 impl SATA mode
[    0.777719] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    0.780570] scsi host0: ahci
[    0.780709] scsi host1: ahci
[    0.780838] scsi host2: ahci
[    0.780949] scsi host3: ahci
[    0.781074] scsi host4: ahci
[    0.781133] ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 30
[    0.781134] ata2: DUMMY
[    0.781135] ata3: DUMMY
[    0.781135] ata4: DUMMY
[    0.781138] ata5: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06300 irq 30
[    1.081057] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.089055] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    1.092731] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.092758] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.093842] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.093855] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.093857] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.094648] ata1.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133
[    1.094651] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.095768] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.095772] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.095776] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.095959] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.095963] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.095966] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.096242] ata5.00: ATAPI: hp      DVD A  DH16ACSHR, JHG6, max UDMA/100
[    1.096607] ata1.00: configured for UDMA/133
[    1.096790] scsi 0:0:0:0: Direct-Access     ATA      ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
[    1.097880] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.097892] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.097894] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.098207] ata5.00: configured for UDMA/100
[    1.100332] scsi 4:0:0:0: CD-ROM            hp       DVD A  DH16ACSHR JHG6 PQ: 0 ANSI: 5
[    1.135644] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.135648] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.135660] sd 0:0:0:0: [sda] Write Protect is off
[    1.135663] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.135678] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.168378] sr 4:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.168381] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.168639] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.179729]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[    1.180171] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.209570] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[    1.209574] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.209963] hub 3-1:1.0: USB hub found
[    1.210010] hub 3-1:1.0: 4 ports detected
[    1.217381] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[    1.217393] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.217663] hub 4-1:1.0: USB hub found
[    1.217749] hub 4-1:1.0: 6 ports detected
[    1.311034] tsc: Refined TSC clocksource calibration: 3392.293 MHz
[    1.311045] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5de2a436, max_idle_ns: 440795285127 ns
[    1.487060] usb 3-1.3: new low-speed USB device number 3 using ehci-pci
[    1.495049] usb 4-1.6: new high-speed USB device number 3 using ehci-pci
[    1.574754] usb 4-1.6: New USB device found, idVendor=058f, idProduct=6366
[    1.574758] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.574761] usb 4-1.6: Product: Mass Storage Device
[    1.574763] usb 4-1.6: Manufacturer: Generic
[    1.574765] usb 4-1.6: SerialNumber: 058F63666433
[    1.575042] usb 3-1.3: New USB device found, idVendor=04ca, idProduct=004b
[    1.575046] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.575050] usb 3-1.3: Product: USB Keyboard
[    1.575053] usb 3-1.3: Manufacturer: Lite-On Technology Corp.
[    1.577434] usb-storage 4-1.6:1.0: USB Mass Storage device detected
[    1.577553] scsi host5: usb-storage 4-1.6:1.0
[    1.577637] usbcore: registered new interface driver usb-storage
[    1.577963] hidraw: raw HID events driver (C) Jiri Kosina
[    1.578435] usbcore: registered new interface driver uas
[    1.584699] usbcore: registered new interface driver usbhid
[    1.584701] usbhid: USB HID core driver
[    1.585989] input: Lite-On Technology Corp. USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:04CA:004B.0001/input/input3
[    1.638094] hid-generic 0003:04CA:004B.0001: input,hidraw0: USB HID v1.10 Keyboard [Lite-On Technology Corp. USB Keyboard] on usb-0000:00:1a.0-1.3/input0
[    1.638266] input: Lite-On Technology Corp. USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.1/0003:04CA:004B.0002/input/input4
[    1.640046] usb 3-1.4: new low-speed USB device number 4 using ehci-pci
[    1.690182] hid-generic 0003:04CA:004B.0002: input,hidraw1: USB HID v1.10 Device [Lite-On Technology Corp. USB Keyboard] on usb-0000:00:1a.0-1.3/input1
[    1.723078] usb 3-1.4: New USB device found, idVendor=046d, idProduct=c05a
[    1.723083] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.723085] usb 3-1.4: Product: USB Optical Mouse
[    1.723088] usb 3-1.4: Manufacturer: Logitech
[    1.725828] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/0003:046D:C05A.0003/input/input5
[    1.725906] hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.4/input0
[    2.319173] clocksource: Switched to clocksource tsc
[    2.591842] scsi 5:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
[    2.616759] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[   22.191251] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   23.167512] ip_tables: (C) 2000-2006 Netfilter Core Team
[   23.208239] systemd[1]: systemd 237 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[   23.220249] systemd[1]: Detected architecture x86-64.
[   23.230959] systemd[1]: Set hostname to <The-Nexus-Tribe>.
[   24.042745] systemd[1]: /etc/systemd/system/aur-auto-vote.timer:3: Unknown lvalue 'Unit' in section 'Unit'
[   24.350590] systemd[1]: Reached target Login Prompts.
[   24.350767] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   24.351523] systemd[1]: Created slice System Slice.
[   24.351675] systemd[1]: Listening on Journal Socket.
[   24.352032] systemd[1]: Created slice system-getty.slice.
[   24.353115] systemd[1]: Mounting Kernel Debug File System...
[   24.696205] zram: Added device: zram0
[   24.696275] zram: Added device: zram1
[   24.696337] zram: Added device: zram2
[   24.696400] zram: Added device: zram3
[   24.734354] EXT4-fs (sda6): re-mounted. Opts: data=ordered
[   24.827997] systemd-journald[273]: Received request to flush runtime journal from PID 1
[   25.782993] systemd-journald[273]: File /var/log/journal/04ac497402ec459dbdb0f60643fd216f/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   27.902388] rtc_cmos 00:02: RTC can wake from S4
[   27.902528] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[   27.902559] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[   27.980977] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[   27.980983] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   27.980986] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   27.980989] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.EHC1.GPSS) (20170831/utaddress-247)
[   27.980992] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   27.980992] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   27.980995] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.EHC1.GPSS) (20170831/utaddress-247)
[   27.980997] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   27.980998] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   27.981006] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.EHC1.GPSS) (20170831/utaddress-247)
[   27.981008] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   27.981009] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   28.087090] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   28.103268] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   28.429476] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   28.449107] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   28.449109] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   28.449110] RAPL PMU: hw unit of domain package 2^-16 Joules
[   28.449110] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   28.837428] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   28.838072] r8169 0000:04:00.0 eth0: RTL8168evl/8111evl at 0x0000000058619ea2, b4:b5:2f:b1:a9:f5, XID 0c900880 IRQ 32
[   28.838074] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   28.979470] zram0: detected capacity change from 0 to 536870912
[   29.043121] zram1: detected capacity change from 0 to 536870912
[   29.053661] zram2: detected capacity change from 0 to 536870912
[   29.054376] zram3: detected capacity change from 0 to 536870912
[   29.188277] Adding 524284k swap on /dev/zram1.  Priority:-2 extents:1 across:524284k SSFS
[   29.188312] Adding 524284k swap on /dev/zram0.  Priority:-3 extents:1 across:524284k SSFS
[   29.341015] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   29.342885] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   29.388526] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   29.388529] cfg80211: failed to load regulatory.db
[   29.534138] iTCO_vendor_support: vendor-support=0
[   29.620858] r8169 0000:04:00.0 enp4s0: renamed from eth0
[   29.669176] snd_hda_intel 0000:00:1b.0: enabling device (0100 -> 0102)
[   29.669392] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   29.685817] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   29.685867] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   29.686139] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   29.885066] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD73E1X5: line_outs=4 (0xc/0xf/0x10/0x11/0x0) type:speaker
[   29.885070] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   29.885072] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   29.885073] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   29.885074] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   29.885076] snd_hda_codec_idt hdaudioC0D0:      Mic=0xe
[   29.885078] snd_hda_codec_idt hdaudioC0D0:      Line=0xd
[   29.895633] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   29.896663] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   29.896731] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   29.896797] input: HDA Intel PCH Speaker Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   29.896858] input: HDA Intel PCH Speaker Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   29.896915] input: HDA Intel PCH Speaker CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   29.897019] input: HDA Intel PCH Speaker Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   29.897076] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   30.018981] Adding 2098172k swap on /dev/sda5.  Priority:-4 extents:1 across:2098172k FS
[   30.022691] rt2800pci 0000:03:00.0: enabling device (0100 -> 0102)
[   30.022879] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 1502 detected
[   30.027236] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5390 detected
[   30.075741] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   30.078016] rt2800pci 0000:03:00.0 wlp3s0: renamed from wlan0
[   30.477553] mousedev: PS/2 mouse device common for all mice
[   30.848352] intel_rapl: Found RAPL domain package
[   30.848354] intel_rapl: Found RAPL domain core
[   30.848355] intel_rapl: Found RAPL domain uncore
[   30.848361] intel_rapl: RAPL package 0 domain package locked by BIOS
[   31.631214] random: crng init done
[   32.278393] zram: Added device: zram4
[   32.279108] zram4: detected capacity change from 0 to 1003024384
[   32.644503] Adding 979512k swap on /dev/zram4.  Priority:32767 extents:1 across:979512k SSDscFS
[   35.654993] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   35.787223] r8169 0000:04:00.0 enp4s0: link down
[   35.787230] r8169 0000:04:00.0 enp4s0: link down
[   35.787302] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   35.794117] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   35.794178] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
[   35.811420] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.40
[   35.909740] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   35.941554] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   36.757260] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   38.755962] r8169 0000:04:00.0 enp4s0: link up
[   38.755969] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[   41.135641] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   42.984345] fuse init (API version 7.26)
[   48.328082] wlp3s0: authenticate with d0:17:c2:3c:e8:c0
[   48.336463] wlp3s0: send auth to d0:17:c2:3c:e8:c0 (try 1/3)
[   48.439052] wlp3s0: send auth to d0:17:c2:3c:e8:c0 (try 2/3)
[   48.543103] wlp3s0: send auth to d0:17:c2:3c:e8:c0 (try 3/3)
[   48.647050] wlp3s0: authentication with d0:17:c2:3c:e8:c0 timed out
[   49.831885] wlp3s0: authenticate with d0:17:c2:3c:e8:c0
[   49.840754] wlp3s0: send auth to d0:17:c2:3c:e8:c0 (try 1/3)
[   49.951051] wlp3s0: send auth to d0:17:c2:3c:e8:c0 (try 2/3)
[   50.055049] wlp3s0: send auth to d0:17:c2:3c:e8:c0 (try 3/3)
[   50.159038] wlp3s0: authentication with d0:17:c2:3c:e8:c0 timed out
[   63.927759] wlp3s0: authenticate with d0:17:c2:3c:e8:c0
[   63.935501] wlp3s0: send auth to d0:17:c2:3c:e8:c0 (try 1/3)
[   64.039053] wlp3s0: send auth to d0:17:c2:3c:e8:c0 (try 2/3)
[   64.143017] wlp3s0: send auth to d0:17:c2:3c:e8:c0 (try 3/3)
[   64.246445] wlp3s0: authentication with d0:17:c2:3c:e8:c0 timed out
[   66.003311] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   66.040822] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   90.120363] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   90.180238] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   90.217165] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  434.050002] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  692.681243] perf: interrupt took too long (2529 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[  749.023759] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  932.734740] perf: interrupt took too long (3163 > 3161), lowering kernel.perf_event_max_sample_rate to 63000
[ 1064.031598] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1272.562810] perf: interrupt took too long (3994 > 3953), lowering kernel.perf_event_max_sample_rate to 50000
[ 1379.098273] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1694.081433] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1822.602517] perf: interrupt took too long (5034 > 4992), lowering kernel.perf_event_max_sample_rate to 39000
[ 2009.079210] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2324.093346] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2639.067125] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2954.066191] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3083.162033] perf: interrupt took too long (6299 > 6292), lowering kernel.perf_event_max_sample_rate to 31000
[ 3269.084847] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3584.087622] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3899.093576] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 4214.106098] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 4529.103661] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 4844.111452] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 5159.115301] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 5474.077236] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 5789.081948] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6104.130862] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6419.130259] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6653.141193] perf: interrupt took too long (7982 > 7873), lowering kernel.perf_event_max_sample_rate to 25000
[ 6734.138013] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 7049.132040] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 7364.097746] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 7679.105721] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 7994.129542] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 8309.128260] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 8624.158123] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 8939.162089] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 9254.164300] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 9569.168173] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 9884.169192] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[10199.180536] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[10514.192003] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[10829.197713] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[11144.198311] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[11459.212365] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[11774.217161] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[12089.197724] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[12404.204137] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[12719.205952] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[13034.210640] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[13349.215845] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[13664.215118] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[13979.228829] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[14294.230572] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[14609.233551] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[14924.244808] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[15239.246872] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[15554.258423] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[15869.239632] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[16184.243217] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[16499.258862] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[16814.259711] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[17129.264085] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[17444.277844] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[17759.278418] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[18074.267221] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[18389.272557] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[18704.288206] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[19019.292629] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[19334.298386] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[19649.303090] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[19964.258929] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[20279.221480] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[20594.294260] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[20909.275883] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[21224.302349] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[21539.278600] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[21854.314879] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[22169.299539] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[22484.324317] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[22799.302044] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[23114.298928] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[23429.318525] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[23744.346879] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[24059.359475] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[24374.358446] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[24689.336437] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[25004.335106] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[25319.367060] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[25634.366505] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[25949.377485] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[26264.374490] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[26579.362982] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[26894.358884] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[27209.372144] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[27524.378338] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[27839.375284] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[28154.374366] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[28469.402560] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[28792.408618] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[29107.423995] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[29422.411184] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[29737.405776] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[30052.415024] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[30367.411617] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[30682.443065] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[30997.447273] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[31312.449522] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[31627.456228] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[31942.455446] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[32257.456477] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[32572.464812] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[32887.461826] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[33202.475663] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[33517.472950] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[33832.480718] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[34147.479972] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[34462.465240] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[34777.463772] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[35092.501339] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[35408.608893] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[35723.506062] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[36038.524139] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[36088.549738] Chrome_~dThread[16569]: segfault at 0 ip 00007f454e4cb3cd sp 00007f454cc5daf0 error 6 in libxul.so (deleted)[7f454e201000+48f5000]
[36088.550335] Chrome_~dThread[16390]: segfault at 0 ip 00007f1851acb3cd sp 00007f185025daf0 error 6 in libxul.so (deleted)[7f1851801000+48f5000]
[36088.550407] Chrome_~dThread[16619]: segfault at 0 ip 00007f9d55ccb3cd sp 00007f9d5445daf0 error 6 in libxul.so (deleted)[7f9d55a01000+48f5000]
[36088.824854] Chrome_~dThread[26501]: segfault at 0 ip 00007fd7cb7f4df5 sp 00007fd7c9f88af0 error 6 in libxul.so[7fd7cb52c000+48c6000]
[36111.426751] traps: bamfdaemon[1209] general protection ip:558b001b1201 sp:7ffffdc11510 error:0 in bamfdaemon[558b00196000+4c000]
[36355.568992] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[36670.523128] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[36985.523452] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[37300.527817] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[37615.527151] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[37930.532038] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[38245.534912] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[38560.537463] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[38875.540400] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[39190.549891] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[39505.552987] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[39820.542611] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[40135.542638] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[40450.567763] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[40765.568656] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[41080.561262] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[41395.558735] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[41710.558265] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[42025.571391] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[42301.715480] r8169 0000:04:00.0 enp4s0: link down
[42340.597075] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[42425.663868] r8169 0000:04:00.0 enp4s0: link up
[42520.195146] r8169 0000:04:00.0 enp4s0: link down
[42523.276097] r8169 0000:04:00.0 enp4s0: link up
[42655.579989] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[42970.639193] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[43285.610225] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[43600.607580] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[43915.610567] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[44230.612825] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[44545.620432] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[44860.618652] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[45175.711692] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[45490.668916] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[45805.637891] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[46120.674168] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[46435.608462] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready

The models of my CPUs are the Intel Core i5 560M for my laptop (that has the issues, but notably less often than my desktop) and the Intel Core i3 2130 for my problematic desktop.

Last edited by tydynrain (2018-03-01 20:05:11)


Registered Linux User: #623501 | Arch Linux Principles: Simplicity - Modernity - Pragmatism - User Centrality - Versatility => KISS

"Open source isn’t an exclusive club; it’s made by people just like you. 'Open Source' is just a fancy term for treating the world’s problems as fixable." - From GitHub.com's 'How to Contribute to Open Source' guide.

Offline

#4 2018-03-01 20:16:34

ooo
Member
Registered: 2013-04-10
Posts: 1,607

Re: [SOLVED] Random Logout and Hard Freeze with Recent Kernels...

Does this happen after updating to mesa-17.3.6-1?
17.3.5 intruduced some bug that caused lockups with intel graphics.

EDIT. I'm not sure after all, whether 17.3.5 introduced the issue, or if it happened earlier.
Nevertheless 17.3.6 should fix some lockups on intel hardware.

Last edited by ooo (2018-03-01 20:24:08)

Offline

#5 2018-03-02 02:27:02

tydynrain
Member
From: Puna District, Pāhoa, Hawai'i
Registered: 2017-10-26
Posts: 66
Website

Re: [SOLVED] Random Logout and Hard Freeze with Recent Kernels...

ooo wrote:

Does this happen after updating to mesa-17.3.6-1?
17.3.5 intruduced some bug that caused lockups with intel graphics.

EDIT. I'm not sure after all, whether 17.3.5 introduced the issue, or if it happened earlier.
Nevertheless 17.3.6 should fix some lockups on intel hardware.

Thank you ooo. Both of those systems are up-to-date, with mesa at 17.3.6-1, so it doesn't seem to help much. In the process of noodling out these issues, I realized that it was likely one, or an interaction of multiple of, the kernels, xorg, mesa, the xf86-video-intel driver in relation to my CPUs and/or my GPUs. I'm determined to figure this out so I don't have to try to find a stable, workable solution every few kernels.


Registered Linux User: #623501 | Arch Linux Principles: Simplicity - Modernity - Pragmatism - User Centrality - Versatility => KISS

"Open source isn’t an exclusive club; it’s made by people just like you. 'Open Source' is just a fancy term for treating the world’s problems as fixable." - From GitHub.com's 'How to Contribute to Open Source' guide.

Offline

#6 2018-03-02 12:07:40

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 6,213

Re: [SOLVED] Random Logout and Hard Freeze with Recent Kernels...

[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e193c728-6c0f-458c-920d-43c1a6a776e5 rw resume=UUID=a9cbdc53-61b5-4d67-a53f-2fe94d97e039 quiet splash scsi_mod.use_blk_mq=1 i915.enable_guc_loading=1 i915.enable_guc_submission=1 zswap.enabled=1 zswap.compressor=lz4 zswap.max_pool_percent=25 zswap.zpool=z3fold

Are i915.enable_guc_loading=1 and i915.enable_guc_submission=1 used on both systems ?
Does it make a difference if you remove them ?


a few other things that stand out :

[36088.549738] Chrome_~dThread[16569]: segfault at 0 ip 00007f454e4cb3cd sp 00007f454cc5daf0 error 6 in libxul.so (deleted)[7f454e201000+48f5000]
[36088.550335] Chrome_~dThread[16390]: segfault at 0 ip 00007f1851acb3cd sp 00007f185025daf0 error 6 in libxul.so (deleted)[7f1851801000+48f5000]
[36088.550407] Chrome_~dThread[16619]: segfault at 0 ip 00007f9d55ccb3cd sp 00007f9d5445daf0 error 6 in libxul.so (deleted)[7f9d55a01000+48f5000]
[36088.824854] Chrome_~dThread[26501]: segfault at 0 ip 00007fd7cb7f4df5 sp 00007fd7c9f88af0 error 6 in libxul.so[7fd7cb52c000+48c6000]
[36111.426751] traps: bamfdaemon[1209] general protection ip:558b001b1201 sp:7ffffdc11510 error:0 in bamfdaemon[558b00196000+4c000]

No clue if that is related


[   29.341015] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   29.342885] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   29.388526] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   29.388529] cfg80211: failed to load regulatory.db

[   66.003311] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   66.040822] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   90.120363] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   90.180238] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   90.217165] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  434.050002] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  692.681243] perf: interrupt took too long (2529 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[  749.023759] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  932.734740] perf: interrupt took too long (3163 > 3161), lowering kernel.perf_event_max_sample_rate to 63000

While wireless issues usually don't impact graphics, "perf: interrupt took to long" messages often appear just after system responsiveness has decreased by a lot .
I have had what I though were hard freezes , that turned out to be driver issues mitigated by perf lowering that setting .
(a few times it took 30+ seconds before the mitigation had effect on responsiveness, giving the impression of a frozen system.)

Last edited by Lone_Wolf (2018-03-02 12:13:23)


Booting with apg Openrc, NOT systemd.
Automounting : not needed, i prefer pmount
Aur helpers : makepkg + my own local repo === rarely need them

Offline

#7 2018-03-02 17:40:30

tydynrain
Member
From: Puna District, Pāhoa, Hawai'i
Registered: 2017-10-26
Posts: 66
Website

Re: [SOLVED] Random Logout and Hard Freeze with Recent Kernels...

Lone_Wolf wrote:
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e193c728-6c0f-458c-920d-43c1a6a776e5 rw resume=UUID=a9cbdc53-61b5-4d67-a53f-2fe94d97e039 quiet splash scsi_mod.use_blk_mq=1 i915.enable_guc_loading=1 i915.enable_guc_submission=1 zswap.enabled=1 zswap.compressor=lz4 zswap.max_pool_percent=25 zswap.zpool=z3fold

Are i915.enable_guc_loading=1 and i915.enable_guc_submission=1 used on both systems ?
Does it make a difference if you remove them ?

Lone_Wolf, thank you. Yes, they are. I'll test removing both options.


a few other things that stand out :

[36088.549738] Chrome_~dThread[16569]: segfault at 0 ip 00007f454e4cb3cd sp 00007f454cc5daf0 error 6 in libxul.so (deleted)[7f454e201000+48f5000]
[36088.550335] Chrome_~dThread[16390]: segfault at 0 ip 00007f1851acb3cd sp 00007f185025daf0 error 6 in libxul.so (deleted)[7f1851801000+48f5000]
[36088.550407] Chrome_~dThread[16619]: segfault at 0 ip 00007f9d55ccb3cd sp 00007f9d5445daf0 error 6 in libxul.so (deleted)[7f9d55a01000+48f5000]
[36088.824854] Chrome_~dThread[26501]: segfault at 0 ip 00007fd7cb7f4df5 sp 00007fd7c9f88af0 error 6 in libxul.so[7fd7cb52c000+48c6000]
[36111.426751] traps: bamfdaemon[1209] general protection ip:558b001b1201 sp:7ffffdc11510 error:0 in bamfdaemon[558b00196000+4c000]

No clue if that is relatetd

Yes, I saw those too. I didn't mention that as I didn't immediately think it was causing the issues.

[   29.341015] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   29.342885] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   29.388526] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   29.388529] cfg80211: failed to load regulatory.db

[   66.003311] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   66.040822] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   90.120363] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   90.180238] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   90.217165] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  434.050002] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  692.681243] perf: interrupt took too long (2529 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[  749.023759] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  932.734740] perf: interrupt took too long (3163 > 3161), lowering kernel.perf_event_max_sample_rate to 63000

While wireless issues usually don't impact graphics, "perf: interrupt took to long" messages often appear just after system responsiveness has decreased by a lot .
I have had what I though were hard freezes , that turned out to be driver issues mitigated by perf lowering that setting .
(a few times it took 30+ seconds before the mitigation had effect on responsiveness, giving the impression of a frozen system.)

The other difference between the two systems is that the laptop is using wireless, while I have the desktop using ethernet, with wireless disabled. I've definitely noticed that sort of behaviour too. The desktop system will do that periodically too, with the hard drive going crazy. It often recovers. When it hard freezes, the hard drive stops responding. I often walk away for up to 5 to 10 minutes to see if it will recover when this happens. Sadly, it rarely does.


Registered Linux User: #623501 | Arch Linux Principles: Simplicity - Modernity - Pragmatism - User Centrality - Versatility => KISS

"Open source isn’t an exclusive club; it’s made by people just like you. 'Open Source' is just a fancy term for treating the world’s problems as fixable." - From GitHub.com's 'How to Contribute to Open Source' guide.

Offline

#8 2018-03-02 19:35:49

tydynrain
Member
From: Puna District, Pāhoa, Hawai'i
Registered: 2017-10-26
Posts: 66
Website

Re: [SOLVED] Random Logout and Hard Freeze with Recent Kernels...

OK, I think I might have found something.

I checked dmesg again on my problematic desktop for warning-level messages, and this is what I found. What is especially interesting is the reference to i915.enable_guc_loading=1 and i915.enable_guc_submission=1 that Lone_Wolf mentioned.

[root@The-Nexus-Tribe tydynrain]# dmesg --level=warn
[    0.009147] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.009148] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.255769] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.353730] Setting dangerous option enable_guc_loading - tainting kernel
[    0.353732] Setting dangerous option enable_guc_submission - tainting kernel
[    4.083459] systemd[1]: /etc/systemd/system/aur-auto-vote.timer:3: Unknown lvalue 'Unit' in section 'Unit'
[    6.965091] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[    6.965099] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[    6.965102] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.EHC1.GPSS) (20170831/utaddress-247)
[    6.965105] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[    6.965108] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.EHC1.GPSS) (20170831/utaddress-247)
[    6.965111] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[    6.965113] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.EHC1.GPSS) (20170831/utaddress-247)
[    6.965116] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.778862] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2

I'm removing i915.enable_guc_loading=1 and i915.enable_guc_submission=1 from my boot parameters now...

EDIT: The same message in dmesg existed on my laptop referring to i915.enable_guc_loading=1 and i915.enable_guc_submission=1. I removed those boot options there too. Now, these are the warn-level messages in dmesg for both systems:

My desktop:

[root@The-Nexus-Tribe tydynrain]# dmesg --level=warn
[    0.009146] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.009146] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.272721] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    6.662189] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[    6.662201] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[    6.662205] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.EHC1.GPSS) (20170831/utaddress-247)
[    6.662210] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[    6.662215] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.EHC1.GPSS) (20170831/utaddress-247)
[    6.662220] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[    6.662224] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.EHC1.GPSS) (20170831/utaddress-247)
[    6.662229] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.635890] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2

My laptop:

[root@The-Nexus-Tribe tydynrain]# dmesg --level=warn
[    0.015054] core: CPUID marked event: 'bus cycles' unavailable
[    2.701797] i8042: Warning: Keylock active
[    3.730659] usb 2-1.8: config 0 descriptor??
[    6.712103] systemd[1]: /etc/systemd/system/aur-auto-vote.timer:3: Unknown lvalue 'Unit' in section 'Unit'
[   10.313797] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[   10.313810] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   10.313816] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   10.313822] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   10.313827] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.448468] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[   11.837933] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   12.159195] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   12.160082] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
[   12.160102] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
[   12.233691] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   12.322412] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[   14.285696] uvcvideo 1-1.4:1.0: Entity type for entity Extension 4 was not initialized!
[   14.285703] uvcvideo 1-1.4:1.0: Entity type for entity Extension 3 was not initialized!
[   14.285708] uvcvideo 1-1.4:1.0: Entity type for entity Processing 2 was not initialized!
[   14.285714] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[  230.793743] atkbd serio0: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
[  230.793745] iwlwifi 0000:02:00.0: RF_KILL bit toggled to disable radio.
[  230.793747] iwlwifi 0000:02:00.0: reporting RF_KILL (radio disabled)
[  230.793748] atkbd serio0: Use 'setkeycodes e008 <keycode>' to make it known.
[  230.795771] iwlwifi 0000:02:00.0: Not sending command - RF KILL
[  230.795779] iwlwifi 0000:02:00.0: Not sending command - RF KILL
[  230.795783] iwlwifi 0000:02:00.0: Not sending command - RF KILL
[  230.795786] iwlwifi 0000:02:00.0: Not sending command - RF KILL
[  230.797051] iwlwifi 0000:02:00.0: Not sending command - RF KILL
[  230.797188] iwlwifi 0000:02:00.0: Not sending command - RF KILL
[  230.797197] iwlwifi 0000:02:00.0: Not sending command - RF KILL
[  230.797204] iwlwifi 0000:02:00.0: Not sending command - RF KILL
[  230.797212] iwlwifi 0000:02:00.0: Not sending command - RF KILL
[  230.797244] iwlwifi 0000:02:00.0: Not sending command - RF KILL
[  230.797255] iwlwifi 0000:02:00.0: Not sending command - RF KILL
[  230.797292] iwlwifi 0000:02:00.0: Not sending command - RF KILL
[  230.807577] iwlwifi 0000:02:00.0: Not sending command - RF KILL
[  231.441583] atkbd serio0: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
[  231.441588] atkbd serio0: Use 'setkeycodes e008 <keycode>' to make it known.
[  231.445169] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[  231.445174] iwlwifi 0000:02:00.0: reporting RF_KILL (radio enabled)
[  260.233576] atkbd serio0: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
[  260.233578] iwlwifi 0000:02:00.0: RF_KILL bit toggled to disable radio.
[  260.233580] iwlwifi 0000:02:00.0: reporting RF_KILL (radio disabled)
[  260.233581] atkbd serio0: Use 'setkeycodes e008 <keycode>' to make it known.
[  260.236628] iwlwifi 0000:02:00.0: Not sending command - RF KILL
[  260.771331] atkbd serio0: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
[  260.771335] atkbd serio0: Use 'setkeycodes e008 <keycode>' to make it known.
[  260.771345] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[  260.771348] iwlwifi 0000:02:00.0: reporting RF_KILL (radio enabled)

As you can see, there are still some notable error messages...

Last edited by tydynrain (2018-03-02 20:33:07)


Registered Linux User: #623501 | Arch Linux Principles: Simplicity - Modernity - Pragmatism - User Centrality - Versatility => KISS

"Open source isn’t an exclusive club; it’s made by people just like you. 'Open Source' is just a fancy term for treating the world’s problems as fixable." - From GitHub.com's 'How to Contribute to Open Source' guide.

Offline

#9 2018-03-03 06:26:05

tydynrain
Member
From: Puna District, Pāhoa, Hawai'i
Registered: 2017-10-26
Posts: 66
Website

Re: [SOLVED] Random Logout and Hard Freeze with Recent Kernels...

So just a quick update. Both systems have been stable, with no random lockups/hard freezes or logouts after removing the above mentioned kernel boot options. I'm going to wait a bit to see if things remain stable before changing this thread to [SOLVED]. In all my numerous debugging experiments, I've tried many different kernel parameters, and after noticing the two 'Setting dangerous option - tainted kernel' messages posted above, I checked the other kernel options I'd tried, and realized that at least another two triggered the same messages on my hardware. I will be religiously checking dmesg's warn and error messages for any that I try in the future. Let's hope that things continue to run smoothly. Thank you all for your help up to this point.


Registered Linux User: #623501 | Arch Linux Principles: Simplicity - Modernity - Pragmatism - User Centrality - Versatility => KISS

"Open source isn’t an exclusive club; it’s made by people just like you. 'Open Source' is just a fancy term for treating the world’s problems as fixable." - From GitHub.com's 'How to Contribute to Open Source' guide.

Offline

#10 2018-03-04 00:50:16

tydynrain
Member
From: Puna District, Pāhoa, Hawai'i
Registered: 2017-10-26
Posts: 66
Website

Re: [SOLVED] Random Logout and Hard Freeze with Recent Kernels...

Well, I thought that the issue had been resolved, but alas, no. The desktop system just froze again while watching a video in VLC. Both systems have been stable since since I removed the kernel boot parameters mentioned above. It seems that if I don't do anything very intensive, things are fine, but if I do anything that taxes the system at all, it freezes. Bloody hell is this frustrating. It still seems almost completely random, however, as I had been watching videos and doing more intensive activities that did not cause any problem.

This time when it froze, I tried to ping it from my laptop, and it was unreachable. As can be seen at the bottom of the dmesg log, systemd-journald's log was corrupted when I had to do a hard reboot. I've got to figure this nonsense out before I kill my hard drive from all the hard reboots...

The latest warn-level dmesg:

[root@The-Nexus-Tribe tydynrain]# dmeseg --level=warn
bash: dmeseg: command not found
[root@The-Nexus-Tribe tydynrain]# dmesg --level=warn
[    0.008967] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.008968] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.271417] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   23.508029] systemd-journald[274]: File /var/log/journal/04ac497402ec459dbdb0f60643fd216f/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   25.856623] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[   25.856631] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   25.856634] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.EHC1.GPSS) (20170831/utaddress-247)
[   25.856638] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   25.856640] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.EHC1.GPSS) (20170831/utaddress-247)
[   25.856643] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   25.856645] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.EHC1.GPSS) (20170831/utaddress-247)
[   25.856648] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   26.939152] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   51.089669] systemd-journald[274]: File /var/log/journal/04ac497402ec459dbdb0f60643fd216f/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.

Last edited by tydynrain (2018-03-04 01:26:52)


Registered Linux User: #623501 | Arch Linux Principles: Simplicity - Modernity - Pragmatism - User Centrality - Versatility => KISS

"Open source isn’t an exclusive club; it’s made by people just like you. 'Open Source' is just a fancy term for treating the world’s problems as fixable." - From GitHub.com's 'How to Contribute to Open Source' guide.

Offline

#11 2018-03-05 11:48:39

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 6,213

Re: [SOLVED] Random Logout and Hard Freeze with Recent Kernels...

Enabling Terminate X with CTRL+ALT+BKSPC and/or kernel REISUB may allow a more graceful reboot (maybe even get better logs of the event).


Booting with apg Openrc, NOT systemd.
Automounting : not needed, i prefer pmount
Aur helpers : makepkg + my own local repo === rarely need them

Offline

#12 2018-03-06 17:04:44

tydynrain
Member
From: Puna District, Pāhoa, Hawai'i
Registered: 2017-10-26
Posts: 66
Website

Re: [SOLVED] Random Logout and Hard Freeze with Recent Kernels...

Lone_Wolf wrote:

Enabling Terminate X with CTRL+ALT+BKSPC and/or kernel REISUB may allow a more graceful reboot (maybe even get better logs of the event).

Thank you Lone_Wolf, I'll try that, though when it freezes (which the desktop system is still doing, even with the newest 4.15.7-1 kernel) no input responds at all. I'm still trouble shooting. Going back to the default CFQ does not help. I'm testing it now with zram disabled. I just enabled both of your suggestions on the desktop, and will see if they help with more graceful reboots and logging.

Last edited by tydynrain (2018-03-06 18:00:27)


Registered Linux User: #623501 | Arch Linux Principles: Simplicity - Modernity - Pragmatism - User Centrality - Versatility => KISS

"Open source isn’t an exclusive club; it’s made by people just like you. 'Open Source' is just a fancy term for treating the world’s problems as fixable." - From GitHub.com's 'How to Contribute to Open Source' guide.

Offline

#13 2018-03-09 03:40:01

tydynrain
Member
From: Puna District, Pāhoa, Hawai'i
Registered: 2017-10-26
Posts: 66
Website

Re: [SOLVED] Random Logout and Hard Freeze with Recent Kernels...

After more troubleshooting and testing, I'm still at a loss in regards to the desktop system, as no matter what I do, it completely seizes up  at some point. I tried going back to CFQ (I put all 3 of my Arch installs back to CFQ from BFQ, as there is still a bug in all recent kernels that causes external USB hard drives not to be able to mount, and hangs on shutdown or reboot because the system is still trying to mount any USB hard drives that I happened to plug in), I tried disabling zram (going back to normal swap), both of which seem to have had no noticeable effect. Enabling ctrl+alt+backspace and REISUB did nothing, as when the system freezes, it is a complete hard freeze (no response from the GUI, mouse, keyboard, or the hard drive).

The laptop has been rock solid, however, with no notable problems at all, even under quite heavy use and load , which is good. At this point I have no clue what could be causing the freezing. I'll continue researching and testing.

Last edited by tydynrain (2018-03-09 03:44:54)


Registered Linux User: #623501 | Arch Linux Principles: Simplicity - Modernity - Pragmatism - User Centrality - Versatility => KISS

"Open source isn’t an exclusive club; it’s made by people just like you. 'Open Source' is just a fancy term for treating the world’s problems as fixable." - From GitHub.com's 'How to Contribute to Open Source' guide.

Offline

#14 2018-03-09 07:46:27

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 5,240

Re: [SOLVED] Random Logout and Hard Freeze with Recent Kernels...

After having done a REISUB on the freezing system, does the journal from the freezing boot

journalctl -b-1

contain more information?

Offline

#15 2018-03-09 09:41:50

tydynrain
Member
From: Puna District, Pāhoa, Hawai'i
Registered: 2017-10-26
Posts: 66
Website

Re: [SOLVED] Random Logout and Hard Freeze with Recent Kernels...

V1del wrote:

After having done a REISUB on the freezing system, does the journal from the freezing boot

journalctl -b-1

contain more information?

Nothing that seems relevant:

[root@The-Nexus-Tribe tydynrain]# journalctl -b -1
-- Logs begin at Thu 2018-01-18 00:03:18 PST, end at Fri 2018-03-09 01:38:41 PST. --
Mar 08 01:03:36 The-Nexus-Tribe kernel: microcode: microcode updated early to revision 0x29, date = 2013-06-12
Mar 08 01:03:36 The-Nexus-Tribe kernel: Linux version 4.15.7-1-ARCH (builduser@heftig-14534) (gcc version 7.3.0 (GCC)) >
Mar 08 01:03:36 The-Nexus-Tribe kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e193c728-6c0f-458c-920d->
Mar 08 01:03:36 The-Nexus-Tribe kernel: KERNEL supported cpus:
Mar 08 01:03:36 The-Nexus-Tribe kernel:   Intel GenuineIntel
Mar 08 01:03:36 The-Nexus-Tribe kernel:   AMD AuthenticAMD
Mar 08 01:03:36 The-Nexus-Tribe kernel:   Centaur CentaurHauls
Mar 08 01:03:36 The-Nexus-Tribe kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
Mar 08 01:03:36 The-Nexus-Tribe kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
Mar 08 01:03:36 The-Nexus-Tribe kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
Mar 08 01:03:36 The-Nexus-Tribe kernel: x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
Mar 08 01:03:36 The-Nexus-Tribe kernel: x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standar>
Mar 08 01:03:36 The-Nexus-Tribe kernel: e820: BIOS-provided physical RAM map:
Mar 08 01:03:36 The-Nexus-Tribe kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
Mar 08 01:03:36 The-Nexus-Tribe kernel: BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
Mar 08 01:03:36 The-Nexus-Tribe kernel: BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
Mar 08 01:03:36 The-Nexus-Tribe kernel: BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
Mar 08 01:03:36 The-Nexus-Tribe kernel: BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
Mar 08 01:03:36 The-Nexus-Tribe kernel: BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
Mar 08 01:03:36 The-Nexus-Tribe kernel: BIOS-e820: [mem 0x0000000040200000-0x00000000d830cfff] usable
Mar 08 01:03:36 The-Nexus-Tribe kernel: BIOS-e820: [mem 0x00000000d830d000-0x00000000d8acafff] reserved
Mar 08 01:03:36 The-Nexus-Tribe kernel: BIOS-e820: [mem 0x00000000d8acb000-0x00000000d8ad6fff] ACPI data
Mar 08 01:03:36 The-Nexus-Tribe kernel: BIOS-e820: [mem 0x00000000d8ad7000-0x00000000d8b61fff] reserved
Mar 08 01:03:36 The-Nexus-Tribe kernel: BIOS-e820: [mem 0x00000000d8b62000-0x00000000d8b67fff] ACPI data
Mar 08 01:03:36 The-Nexus-Tribe kernel: BIOS-e820: [mem 0x00000000d8b68000-0x00000000d8c09fff] usable
Mar 08 01:03:36 The-Nexus-Tribe kernel: BIOS-e820: [mem 0x00000000d8c0a000-0x00000000d8d1afff] ACPI NVS
Mar 08 01:03:36 The-Nexus-Tribe kernel: BIOS-e820: [mem 0x00000000d8d1b000-0x00000000d9360fff] reserved
Mar 08 01:03:36 The-Nexus-Tribe kernel: BIOS-e820: [mem 0x00000000d9361000-0x00000000d943dfff] type 20
Mar 08 01:03:36 The-Nexus-Tribe kernel: BIOS-e820: [mem 0x00000000d943e000-0x00000000d943efff] usable
Mar 08 01:03:36 The-Nexus-Tribe kernel: BIOS-e820: [mem 0x00000000d943f000-0x00000000d9481fff] ACPI NVS
Mar 08 01:03:36 The-Nexus-Tribe kernel: BIOS-e820: [mem 0x00000000d9482000-0x00000000d9d32fff] usable
Mar 08 01:03:36 The-Nexus-Tribe kernel: BIOS-e820: [mem 0x00000000d9d33000-0x00000000d9ff1fff] reserved
Mar 08 01:03:36 The-Nexus-Tribe kernel: BIOS-e820: [mem 0x00000000d9ff2000-0x00000000d9ffffff] usable

Registered Linux User: #623501 | Arch Linux Principles: Simplicity - Modernity - Pragmatism - User Centrality - Versatility => KISS

"Open source isn’t an exclusive club; it’s made by people just like you. 'Open Source' is just a fancy term for treating the world’s problems as fixable." - From GitHub.com's 'How to Contribute to Open Source' guide.

Offline

#16 2018-03-09 10:10:07

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 5,240

Re: [SOLVED] Random Logout and Hard Freeze with Recent Kernels...

That is truncated by your pager, run with the --no-pager argument or redirect into a file

Offline

#17 2018-03-09 20:51:58

tydynrain
Member
From: Puna District, Pāhoa, Hawai'i
Registered: 2017-10-26
Posts: 66
Website

Re: [SOLVED] Random Logout and Hard Freeze with Recent Kernels...

V1del wrote:

That is truncated by your pager, run with the --no-pager argument or redirect into a file

Ugh, true, my apologies (It was late, and I was deep in the middle of something). I feel like an idiot now, as I had been experimenting with zram and zswap, and when enabling and disabling zram, I was not also disabling zswap, so it was always operating through this entire process, and it seems to be a very likely culprit:

Mar 09 08:32:57 The-Nexus-Tribe kernel: watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [kswapd0:57]
Mar 09 08:32:57 The-Nexus-Tribe kernel: Modules linked in: fuse nls_iso8859_1 joydev input_leds mousedev nls_cp437 vfat fat intel_rapl x86_pkg_temp_thermal intel_powerclamp arc4 rt2800pci coretemp rt2800mmio iTCO_wdt kvm_intel iTCO_vendor_support rt2800lib kvm r8169 rt2x00pci rt2x00mmio irqbypass rt2x00lib mii crct10dif_pclmul mac80211 crc32_pclmul ghash_clmulni_intel cryptd snd_hda_codec_idt snd_hda_codec_generic cfg80211 eeprom_93cx6 rfkill led_class intel_cstate shpchp snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd intel_uncore soundcore mei_me mei i2c_i801 pcspkr intel_rapl_perf lpc_ich evdev rtc_cmos mac_hid zram crypto_user ip_tables x_tables ext4 crc16 mbcache jbd2 fscrypto uas usb_storage hid_generic usbhid hid sr_mod cdrom sd_mod ahci libahci ehci_pci xhci_pci libata crc32c_intel xhci_hcd
Mar 09 08:32:57 The-Nexus-Tribe kernel:  ehci_hcd scsi_mod usbcore usb_common intel_agp i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm intel_gtt agpgart lz4 lz4_compress
Mar 09 08:32:57 The-Nexus-Tribe kernel: CPU: 3 PID: 57 Comm: kswapd0 Not tainted 4.15.7-1-ARCH #1
Mar 09 08:32:57 The-Nexus-Tribe kernel: Hardware name: Hewlett-Packard s5-1414/2ADA, BIOS 8.07 08/29/2012
Mar 09 08:32:57 The-Nexus-Tribe kernel: RIP: 0010:native_queued_spin_lock_slowpath+0x17e/0x1e0
Mar 09 08:32:57 The-Nexus-Tribe kernel: RSP: 0018:ffffa51b40913890 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff11
Mar 09 08:32:57 The-Nexus-Tribe kernel: RAX: 0000000000000101 RBX: ffff9c03c3157010 RCX: 0000000000000001
Mar 09 08:32:57 The-Nexus-Tribe kernel: RDX: 0000000000000101 RSI: 0000000000000001 RDI: ffff9c03c3157010
Mar 09 08:32:57 The-Nexus-Tribe kernel: RBP: ffff9c03c3157000 R08: 0000000000000101 R09: 0000000000000033
Mar 09 08:32:57 The-Nexus-Tribe kernel: R10: ffff9c03bdbe5940 R11: 0000000000000034 R12: ffff9c03c3157000
Mar 09 08:32:57 The-Nexus-Tribe kernel: R13: ffff9c03c3157010 R14: ffff9c04582b6198 R15: ffffcf9c0408aac0
Mar 09 08:32:57 The-Nexus-Tribe kernel: FS:  0000000000000000(0000) GS:ffff9c045fb80000(0000) knlGS:0000000000000000
Mar 09 08:32:57 The-Nexus-Tribe kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Mar 09 08:32:57 The-Nexus-Tribe kernel: CR2: 00007fd744a13772 CR3: 000000006c00a003 CR4: 00000000000606e0
Mar 09 08:32:57 The-Nexus-Tribe kernel: Call Trace:
Mar 09 08:32:57 The-Nexus-Tribe kernel:  _raw_spin_lock+0x2e/0x40
Mar 09 08:32:57 The-Nexus-Tribe kernel:  z3fold_zpool_map+0x6d/0xf0
Mar 09 08:32:57 The-Nexus-Tribe kernel:  zswap_writeback_entry+0x49/0x3b0
Mar 09 08:32:57 The-Nexus-Tribe kernel:  ? radix_tree_node_alloc.constprop.12+0x89/0xd0
Mar 09 08:32:57 The-Nexus-Tribe kernel:  ? kmem_cache_alloc+0x175/0x1b0
Mar 09 08:32:57 The-Nexus-Tribe kernel:  z3fold_zpool_shrink+0x2e8/0x3a0
Mar 09 08:32:57 The-Nexus-Tribe kernel:  zswap_frontswap_store+0x29d/0x4f0
Mar 09 08:32:57 The-Nexus-Tribe kernel:  __frontswap_store+0x6e/0xf0
Mar 09 08:32:57 The-Nexus-Tribe kernel:  swap_writepage+0x37/0x70
Mar 09 08:32:57 The-Nexus-Tribe kernel:  shmem_writepage+0x1c3/0x310
Mar 09 08:32:57 The-Nexus-Tribe kernel:  pageout.isra.19+0x146/0x350
Mar 09 08:32:57 The-Nexus-Tribe kernel:  shrink_page_list+0x79e/0xb70
Mar 09 08:32:57 The-Nexus-Tribe kernel:  shrink_inactive_list+0x284/0x570
Mar 09 08:32:57 The-Nexus-Tribe kernel:  shrink_node_memcg+0x354/0x7b0
Mar 09 08:32:57 The-Nexus-Tribe kernel:  ? shrink_node+0xfb/0x300
Mar 09 08:32:57 The-Nexus-Tribe kernel:  shrink_node+0xfb/0x300
Mar 09 08:32:57 The-Nexus-Tribe kernel:  kswapd+0x295/0x720
Mar 09 08:32:57 The-Nexus-Tribe kernel:  ? mem_cgroup_shrink_node+0x1d0/0x1d0
Mar 09 08:32:57 The-Nexus-Tribe kernel:  kthread+0x113/0x130
Mar 09 08:32:57 The-Nexus-Tribe kernel:  ? kthread_create_on_node+0x70/0x70
Mar 09 08:32:57 The-Nexus-Tribe kernel:  ret_from_fork+0x35/0x40
Mar 09 08:32:57 The-Nexus-Tribe kernel: Code: c7 41 08 01 00 00 00 eb 48 f3 90 8b 37 81 fe 00 01 00 00 74 f4 e9 cd fe ff ff 83 fa 01 0f 84 ad fe ff ff 8b 07 84 c0 74 08 f3 90 <8b> 07 84 c0 75 f8 b8 01 00 00 00 66 89 07 48 83 c4 08 5b 5d c3 
Mar 09 08:33:01 The-Nexus-Tribe crond[13975]: pam_unix(crond:session): session opened for user root by (uid=0)
Mar 09 08:33:01 The-Nexus-Tribe CROND[13976]: (root) CMD (reflector --threads 4 --protocol https --age 1 --latest 100 --fastest 100 --score 100 --sort rate --save /etc/pacman.d/mirrorlist)
Mar 09 08:33:16 The-Nexus-Tribe CROND[13474]: pam_unix(crond:session): session closed for user root
Mar 09 08:33:17 The-Nexus-Tribe dbus-daemon[537]: [system] Connection ":1.119" is not allowed to add more match rules (increase limits in configuration file if required; max_match_rules_per_connection=2048)
Mar 09 08:33:17 The-Nexus-Tribe dbus-daemon[537]: [system] Connection ":1.119" is not allowed to add more match rules (increase limits in configuration file if required; max_match_rules_per_connection=2048)
Mar 09 08:33:17 The-Nexus-Tribe dbus-daemon[537]: [system] Connection ":1.119" is not allowed to add more match rules (increase limits in configuration file if required; max_match_rules_per_connection=2048)
Mar 09 08:33:17 The-Nexus-Tribe dbus-daemon[537]: [system] Connection ":1.119" is not allowed to add more match rules (increase limits in configuration file if required; max_match_rules_per_connection=2048)
Mar 09 08:33:25 The-Nexus-Tribe kernel: watchdog: BUG: soft lockup - CPU#3 stuck for 23s! [kswapd0:57]
Mar 09 08:33:25 The-Nexus-Tribe kernel: Modules linked in: fuse nls_iso8859_1 joydev input_leds mousedev nls_cp437 vfat fat intel_rapl x86_pkg_temp_thermal intel_powerclamp arc4 rt2800pci coretemp rt2800mmio iTCO_wdt kvm_intel iTCO_vendor_support rt2800lib kvm r8169 rt2x00pci rt2x00mmio irqbypass rt2x00lib mii crct10dif_pclmul mac80211 crc32_pclmul ghash_clmulni_intel cryptd snd_hda_codec_idt snd_hda_codec_generic cfg80211 eeprom_93cx6 rfkill led_class intel_cstate shpchp snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd intel_uncore soundcore mei_me mei i2c_i801 pcspkr intel_rapl_perf lpc_ich evdev rtc_cmos mac_hid zram crypto_user ip_tables x_tables ext4 crc16 mbcache jbd2 fscrypto uas usb_storage hid_generic usbhid hid sr_mod cdrom sd_mod ahci libahci ehci_pci xhci_pci libata crc32c_intel xhci_hcd
Mar 09 08:33:25 The-Nexus-Tribe kernel:  ehci_hcd scsi_mod usbcore usb_common intel_agp i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm intel_gtt agpgart lz4 lz4_compress
Mar 09 08:33:25 The-Nexus-Tribe kernel: CPU: 3 PID: 57 Comm: kswapd0 Tainted: G             L   4.15.7-1-ARCH #1
Mar 09 08:33:25 The-Nexus-Tribe kernel: Hardware name: Hewlett-Packard s5-1414/2ADA, BIOS 8.07 08/29/2012
Mar 09 08:33:25 The-Nexus-Tribe kernel: RIP: 0010:native_queued_spin_lock_slowpath+0x17e/0x1e0
Mar 09 08:33:25 The-Nexus-Tribe kernel: RSP: 0018:ffffa51b40913890 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff11
Mar 09 08:33:25 The-Nexus-Tribe kernel: RAX: 0000000000000101 RBX: ffff9c03c3157010 RCX: 0000000000000001
Mar 09 08:33:25 The-Nexus-Tribe kernel: RDX: 0000000000000101 RSI: 0000000000000001 RDI: ffff9c03c3157010
Mar 09 08:33:25 The-Nexus-Tribe kernel: RBP: ffff9c03c3157000 R08: 0000000000000101 R09: 0000000000000033
Mar 09 08:33:25 The-Nexus-Tribe kernel: R10: ffff9c03bdbe5940 R11: 0000000000000034 R12: ffff9c03c3157000
Mar 09 08:33:25 The-Nexus-Tribe kernel: R13: ffff9c03c3157010 R14: ffff9c04582b6198 R15: ffffcf9c0408aac0
Mar 09 08:33:25 The-Nexus-Tribe kernel: FS:  0000000000000000(0000) GS:ffff9c045fb80000(0000) knlGS:0000000000000000
Mar 09 08:33:25 The-Nexus-Tribe kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Mar 09 08:33:25 The-Nexus-Tribe kernel: CR2: 00007fd744a13772 CR3: 000000006c00a003 CR4: 00000000000606e0
Mar 09 08:33:25 The-Nexus-Tribe kernel: Call Trace:
Mar 09 08:33:25 The-Nexus-Tribe kernel:  _raw_spin_lock+0x2e/0x40
Mar 09 08:33:25 The-Nexus-Tribe kernel:  z3fold_zpool_map+0x6d/0xf0
Mar 09 08:33:25 The-Nexus-Tribe kernel:  zswap_writeback_entry+0x49/0x3b0
Mar 09 08:33:25 The-Nexus-Tribe kernel:  ? radix_tree_node_alloc.constprop.12+0x89/0xd0
Mar 09 08:33:25 The-Nexus-Tribe kernel:  ? kmem_cache_alloc+0x175/0x1b0
Mar 09 08:33:25 The-Nexus-Tribe kernel:  z3fold_zpool_shrink+0x2e8/0x3a0
Mar 09 08:33:25 The-Nexus-Tribe kernel:  zswap_frontswap_store+0x29d/0x4f0
Mar 09 08:33:25 The-Nexus-Tribe kernel:  __frontswap_store+0x6e/0xf0
Mar 09 08:33:25 The-Nexus-Tribe kernel:  swap_writepage+0x37/0x70
Mar 09 08:33:25 The-Nexus-Tribe kernel:  shmem_writepage+0x1c3/0x310
Mar 09 08:33:25 The-Nexus-Tribe kernel:  pageout.isra.19+0x146/0x350
Mar 09 08:33:25 The-Nexus-Tribe kernel:  shrink_page_list+0x79e/0xb70
Mar 09 08:33:25 The-Nexus-Tribe kernel:  shrink_inactive_list+0x284/0x570
Mar 09 08:33:25 The-Nexus-Tribe kernel:  shrink_node_memcg+0x354/0x7b0
Mar 09 08:33:25 The-Nexus-Tribe kernel:  ? shrink_node+0xfb/0x300
Mar 09 08:33:25 The-Nexus-Tribe kernel:  shrink_node+0xfb/0x300
Mar 09 08:33:25 The-Nexus-Tribe kernel:  kswapd+0x295/0x720
Mar 09 08:33:25 The-Nexus-Tribe kernel:  ? mem_cgroup_shrink_node+0x1d0/0x1d0
Mar 09 08:33:25 The-Nexus-Tribe kernel:  kthread+0x113/0x130
Mar 09 08:33:25 The-Nexus-Tribe kernel:  ? kthread_create_on_node+0x70/0x70
Mar 09 08:33:25 The-Nexus-Tribe kernel:  ret_from_fork+0x35/0x40
Mar 09 08:33:25 The-Nexus-Tribe kernel: Code: c7 41 08 01 00 00 00 eb 48 f3 90 8b 37 81 fe 00 01 00 00 74 f4 e9 cd fe ff ff 83 fa 01 0f 84 ad fe ff ff 8b 07 84 c0 74 08 f3 90 <8b> 07 84 c0 75 f8 b8 01 00 00 00 66 89 07 48 83 c4 08 5b 5d c3 
Mar 09 08:33:28 The-Nexus-Tribe NetworkManager[554]: <info>  [1520613208.5855] connectivity: (enp4s0) timed out
Mar 09 08:33:28 The-Nexus-Tribe NetworkManager[554]: <info>  [1520613208.6160] manager: NetworkManager state is now CONNECTED_SITE
Mar 09 08:33:28 The-Nexus-Tribe dbus-daemon[537]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.12' (uid=0 pid=554 comm="/usr/bin/NetworkManager --no-daemon ")
Mar 09 08:33:28 The-Nexus-Tribe systemd[1]: Starting Network Manager Script Dispatcher Service...
Mar 09 08:33:29 The-Nexus-Tribe dbus-daemon[537]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Mar 09 08:33:29 The-Nexus-Tribe systemd[1]: Started Network Manager Script Dispatcher Service.
Mar 09 08:33:29 The-Nexus-Tribe nm-dispatcher[14202]: req:1 'connectivity-change': new request (0 scripts)
Mar 09 08:33:29 The-Nexus-Tribe nm-dispatcher[14202]: req:1 'connectivity-change': completed: no scripts
Mar 09 08:33:36 The-Nexus-Tribe kernel: INFO: rcu_preempt self-detected stall on CPU
Mar 09 08:33:36 The-Nexus-Tribe kernel:         3-....: (59998 ticks this GP) idle=ade/140000000000001/0 softirq=7370703/7370703 fqs=14919 last_accelerate: 43d0/5284, nonlazy_posted: 3146, L.
Mar 09 08:33:36 The-Nexus-Tribe kernel:          (t=60000 jiffies g=2605298 c=2605297 q=10973)
Mar 09 08:33:36 The-Nexus-Tribe kernel: NMI backtrace for cpu 3
Mar 09 08:33:36 The-Nexus-Tribe kernel: CPU: 3 PID: 57 Comm: kswapd0 Tainted: G             L   4.15.7-1-ARCH #1
Mar 09 08:33:36 The-Nexus-Tribe kernel: Hardware name: Hewlett-Packard s5-1414/2ADA, BIOS 8.07 08/29/2012
Mar 09 08:33:36 The-Nexus-Tribe kernel: Call Trace:
Mar 09 08:33:36 The-Nexus-Tribe kernel:  <IRQ>
Mar 09 08:33:36 The-Nexus-Tribe kernel:  dump_stack+0x5c/0x85
Mar 09 08:33:36 The-Nexus-Tribe kernel:  nmi_cpu_backtrace+0xc0/0xd0
Mar 09 08:33:36 The-Nexus-Tribe kernel:  ? lapic_can_unplug_cpu+0xa0/0xa0
Mar 09 08:33:36 The-Nexus-Tribe kernel:  nmi_trigger_cpumask_backtrace+0xff/0x140
Mar 09 08:33:36 The-Nexus-Tribe kernel:  rcu_dump_cpu_stacks+0x9b/0xd7
Mar 09 08:33:36 The-Nexus-Tribe kernel:  rcu_check_callbacks+0x6eb/0x9c0
Mar 09 08:33:36 The-Nexus-Tribe kernel:  ? cpuacct_account_field+0x1b/0x70
Mar 09 08:33:36 The-Nexus-Tribe kernel:  ? tick_sched_handle.isra.5+0x70/0x70
Mar 09 08:33:36 The-Nexus-Tribe kernel:  update_process_times+0x28/0x50
Mar 09 08:33:36 The-Nexus-Tribe kernel:  tick_sched_handle.isra.5+0x1e/0x70
Mar 09 08:33:36 The-Nexus-Tribe kernel:  ? tick_sched_do_timer+0xe/0x60
Mar 09 08:33:36 The-Nexus-Tribe kernel:  tick_sched_timer+0x38/0x80
Mar 09 08:33:36 The-Nexus-Tribe kernel:  __hrtimer_run_queues+0xdc/0x280
Mar 09 08:33:36 The-Nexus-Tribe kernel:  hrtimer_interrupt+0xb5/0x200
Mar 09 08:33:36 The-Nexus-Tribe kernel:  smp_apic_timer_interrupt+0x69/0x150
Mar 09 08:33:36 The-Nexus-Tribe kernel:  apic_timer_interrupt+0x87/0x90
Mar 09 08:33:36 The-Nexus-Tribe kernel:  </IRQ>
Mar 09 08:33:36 The-Nexus-Tribe kernel: RIP: 0010:native_queued_spin_lock_slowpath+0x180/0x1e0
Mar 09 08:33:36 The-Nexus-Tribe kernel: RSP: 0018:ffffa51b40913890 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff11
Mar 09 08:33:36 The-Nexus-Tribe kernel: RAX: 0000000000000101 RBX: ffff9c03c3157010 RCX: 0000000000000001
Mar 09 08:33:36 The-Nexus-Tribe kernel: RDX: 0000000000000101 RSI: 0000000000000001 RDI: ffff9c03c3157010
Mar 09 08:33:36 The-Nexus-Tribe kernel: RBP: ffff9c03c3157000 R08: 0000000000000101 R09: 0000000000000033
Mar 09 08:33:36 The-Nexus-Tribe kernel: R10: ffff9c03bdbe5940 R11: 0000000000000034 R12: ffff9c03c3157000
Mar 09 08:33:36 The-Nexus-Tribe kernel: R13: ffff9c03c3157010 R14: ffff9c04582b6198 R15: ffffcf9c0408aac0
Mar 09 08:33:36 The-Nexus-Tribe kernel:  _raw_spin_lock+0x2e/0x40
Mar 09 08:33:36 The-Nexus-Tribe kernel:  z3fold_zpool_map+0x6d/0xf0
Mar 09 08:33:36 The-Nexus-Tribe kernel:  zswap_writeback_entry+0x49/0x3b0
Mar 09 08:33:36 The-Nexus-Tribe kernel:  ? radix_tree_node_alloc.constprop.12+0x89/0xd0
Mar 09 08:33:36 The-Nexus-Tribe kernel:  ? kmem_cache_alloc+0x175/0x1b0
Mar 09 08:33:36 The-Nexus-Tribe kernel:  z3fold_zpool_shrink+0x2e8/0x3a0
Mar 09 08:33:36 The-Nexus-Tribe kernel:  zswap_frontswap_store+0x29d/0x4f0
Mar 09 08:33:36 The-Nexus-Tribe kernel:  __frontswap_store+0x6e/0xf0
Mar 09 08:33:36 The-Nexus-Tribe kernel:  swap_writepage+0x37/0x70
Mar 09 08:33:36 The-Nexus-Tribe kernel:  shmem_writepage+0x1c3/0x310
Mar 09 08:33:36 The-Nexus-Tribe kernel:  pageout.isra.19+0x146/0x350
Mar 09 08:33:36 The-Nexus-Tribe kernel:  shrink_page_list+0x79e/0xb70
Mar 09 08:33:36 The-Nexus-Tribe kernel:  shrink_inactive_list+0x284/0x570
Mar 09 08:33:36 The-Nexus-Tribe kernel:  shrink_node_memcg+0x354/0x7b0
Mar 09 08:33:36 The-Nexus-Tribe kernel:  ? shrink_node+0xfb/0x300
Mar 09 08:33:36 The-Nexus-Tribe kernel:  shrink_node+0xfb/0x300
Mar 09 08:33:36 The-Nexus-Tribe kernel:  kswapd+0x295/0x720
Mar 09 08:33:36 The-Nexus-Tribe kernel:  ? mem_cgroup_shrink_node+0x1d0/0x1d0
Mar 09 08:33:36 The-Nexus-Tribe kernel:  kthread+0x113/0x130
Mar 09 08:33:36 The-Nexus-Tribe kernel:  ? kthread_create_on_node+0x70/0x70
Mar 09 08:33:36 The-Nexus-Tribe kernel:  ret_from_fork+0x35/0x40
Mar 09 08:34:01 The-Nexus-Tribe crond[14462]: pam_unix(crond:session): session opened for user root by (uid=0)
Mar 09 08:34:01 The-Nexus-Tribe CROND[14463]: (root) CMD (reflector --threads 4 --protocol https --age 1 --latest 100 --fastest 100 --score 100 --sort rate --save /etc/pacman.d/mirrorlist)
Mar 09 08:34:01 The-Nexus-Tribe kernel: watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [kswapd0:57]

Presently, all non-standard kernel boot parameters (aside from REISUB) have been removed, and zram and zswap have both been disabled (back to regular swap for the moment). I'll see how things go and post my findings.

I'm always tinkering and experimenting, and sometimes I lose track of some of the changes that I make. Duh. I think I need to start logging every single change I make to my system in my experimentation process. Thank you for your willingness to help, and your patience.


Registered Linux User: #623501 | Arch Linux Principles: Simplicity - Modernity - Pragmatism - User Centrality - Versatility => KISS

"Open source isn’t an exclusive club; it’s made by people just like you. 'Open Source' is just a fancy term for treating the world’s problems as fixable." - From GitHub.com's 'How to Contribute to Open Source' guide.

Offline

#18 2018-03-10 13:03:10

tomaszc
Member
Registered: 2010-09-11
Posts: 18

Re: [SOLVED] Random Logout and Hard Freeze with Recent Kernels...

I have ten same problem on Intel i5 M450

Try to downgrade libinput to version 1.10.1:
pacman -U https://archive.archlinux.org/packages/ … pkg.tar.xz

It helps me at the moment, but I'm not sure it was the reason.
If it also helps you, one can report libinput bug.

..
Tomasz

Offline

#19 2018-03-10 13:51:47

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 5,240

Re: [SOLVED] Random Logout and Hard Freeze with Recent Kernels...

That is quite unlikely, as the thread predated that update by a few weeks and has a pretty obvious stack trace pointing towards an issue entirely different from libinput.

Offline

#20 2018-03-12 03:13:31

tydynrain
Member
From: Puna District, Pāhoa, Hawai'i
Registered: 2017-10-26
Posts: 66
Website

Re: [SOLVED] Random Logout and Hard Freeze with Recent Kernels...

@ooo @Lone_Wolf @V1del, After going the weekend with no issues on the desktop, it would seem that the issue has finally been resolved. I will be more diligent with recording any changes that I make to my systems, to make troubleshooting quicker and easier. I want to thank you again for your help, I very much appreciated it. Changing the thread to [SOLVED].

Last edited by tydynrain (2018-03-12 18:44:38)


Registered Linux User: #623501 | Arch Linux Principles: Simplicity - Modernity - Pragmatism - User Centrality - Versatility => KISS

"Open source isn’t an exclusive club; it’s made by people just like you. 'Open Source' is just a fancy term for treating the world’s problems as fixable." - From GitHub.com's 'How to Contribute to Open Source' guide.

Offline

Board footer

Powered by FluxBB