You are not logged in.

#1 2018-06-12 23:50:29

halpls
Member
Registered: 2018-06-12
Posts: 8

[Solved] No input after login into Xorg.

Hello.

This has been my first week using Linux. I have been enjoying the installation and configuration so far overcoming the problems by researching. However, after a system update and reboot I am unable to log into Xorg. Prior to this update the system had not been rebooted for a day, and the many configuration tweaks done in that day are making myself unable to diagnose the problem.

I am using no display manager and I have configured my .xinitrc file and startx to run after login. This set up with i3 was working perfectly before. Now, after entering the user and password, Xorg starts and a disfigured version of my setup appears. Seems like a video-card related problem and there is no input from keyboard/mouse/touchpad. Only the laptop-keyboard-light works, but I think it is controlled by the BIOS. The machine is an Dell XPS 15 9560 with dual GPU, Bumblebee was set up and was working fine. I can force a reboot holding the power button.

The Xorg log follows:

[   965.205] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[   965.205] 
X.Org X Server 1.20.0
X Protocol Version 11, Revision 0
[   965.205] Build Operating System: Linux Arch Linux
[   965.205] Current Operating System: Linux XPS 4.16.13-2-ARCH #1 SMP PREEMPT Fri Jun 1 18:46:11 UTC 2018 x86_64
[   965.205] Kernel command line: initrd=\initramfs-linux.img initrd=\intel-ucode.img root=LABEL=root rw
[   965.205] Build Date: 10 June 2018  09:45:02AM
[   965.205]  
[   965.205] Current version of pixman: 0.34.0
[   965.205] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[   965.205] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   965.206] (==) Log file: "/home/coba/.local/share/xorg/Xorg.0.log", Time: Wed Jun 13 00:57:31 2018
[   965.206] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   965.206] (==) No Layout section.  Using the first Screen section.
[   965.206] (==) No screen section available. Using defaults.
[   965.206] (**) |-->Screen "Default Screen Section" (0)
[   965.206] (**) |   |-->Monitor "<default monitor>"
[   965.206] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   965.206] (==) Automatically adding devices
[   965.206] (==) Automatically enabling devices
[   965.206] (==) Automatically adding GPU devices
[   965.206] (==) Automatically binding GPU devices
[   965.206] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   965.206] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[   965.206] 	Entry deleted from font path.
[   965.206] 	(Run 'mkfontdir' on "/usr/share/fonts/misc").
[   965.206] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF".
[   965.206] 	Entry deleted from font path.
[   965.206] 	(Run 'mkfontdir' on "/usr/share/fonts/OTF").
[   965.206] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   965.206] 	Entry deleted from font path.
[   965.206] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[   965.206] 	Entry deleted from font path.
[   965.206] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[   965.206] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[   965.206] 	Entry deleted from font path.
[   965.206] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[   965.206] (==) FontPath set to:
	/usr/share/fonts/TTF
[   965.206] (==) ModulePath set to "/usr/lib/xorg/modules"
[   965.206] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   965.206] (II) Module ABI versions:
[   965.206] 	X.Org ANSI C Emulation: 0.4
[   965.206] 	X.Org Video Driver: 24.0
[   965.206] 	X.Org XInput driver : 24.1
[   965.206] 	X.Org Server Extension : 10.0
[   965.207] (++) using VT number 1

[   965.208] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[   965.209] (II) xfree86: Adding drm device (/dev/dri/card0)
[   965.209] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[   965.212] (--) PCI:*(0@0:2:0) 8086:591b:1028:07be rev 4, Mem @ 0xeb000000/16777216, 0x80000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[   965.212] (--) PCI: (1@0:0:0) 10de:1c8d:1028:07be rev 161, Mem @ 0xec000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[   965.212] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   965.212] (II) LoadModule: "glx"
[   965.212] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   965.213] (II) Module glx: vendor="X.Org Foundation"
[   965.213] 	compiled for 1.20.0, module version = 1.0.0
[   965.213] 	ABI class: X.Org Server Extension, version 10.0
[   965.213] (==) Matched intel as autoconfigured driver 0
[   965.213] (==) Matched modesetting as autoconfigured driver 1
[   965.213] (==) Matched fbdev as autoconfigured driver 2
[   965.213] (==) Matched vesa as autoconfigured driver 3
[   965.213] (==) Assigned the driver to the xf86ConfigLayout
[   965.213] (II) LoadModule: "intel"
[   965.213] (WW) Warning, couldn't open module intel
[   965.213] (EE) Failed to load module "intel" (module does not exist, 0)
[   965.213] (II) LoadModule: "modesetting"
[   965.213] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   965.213] (II) Module modesetting: vendor="X.Org Foundation"
[   965.213] 	compiled for 1.20.0, module version = 1.20.0
[   965.213] 	Module class: X.Org Video Driver
[   965.213] 	ABI class: X.Org Video Driver, version 24.0
[   965.213] (II) LoadModule: "fbdev"
[   965.213] (WW) Warning, couldn't open module fbdev
[   965.213] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   965.213] (II) LoadModule: "vesa"
[   965.213] (WW) Warning, couldn't open module vesa
[   965.213] (EE) Failed to load module "vesa" (module does not exist, 0)
[   965.213] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   965.214] (II) modeset(0): using drv /dev/dri/card0
[   965.214] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   965.214] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   965.214] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[   965.214] (==) modeset(0): RGB weight 888
[   965.214] (==) modeset(0): Default visual is TrueColor
[   965.214] (II) Loading sub module "glamoregl"
[   965.214] (II) LoadModule: "glamoregl"
[   965.214] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   965.218] (II) Module glamoregl: vendor="X.Org Foundation"
[   965.218] 	compiled for 1.20.0, module version = 1.0.1
[   965.218] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   965.365] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) HD Graphics 630 (Kaby Lake GT2) 
[   965.365] (II) modeset(0): glamor initialized
[   965.367] (II) modeset(0): Output eDP-1 has no monitor section
[   965.367] (II) modeset(0): Output DP-1 has no monitor section
[   965.371] (II) modeset(0): Output HDMI-1 has no monitor section
[   965.371] (II) modeset(0): Output DP-2 has no monitor section
[   965.374] (II) modeset(0): Output HDMI-2 has no monitor section
[   965.376] (II) modeset(0): EDID for output eDP-1
[   965.376] (II) modeset(0): Manufacturer: SHP  Model: 1453  Serial#: 0
[   965.376] (II) modeset(0): Year: 2015  Week: 40
[   965.376] (II) modeset(0): EDID Version: 1.4
[   965.376] (II) modeset(0): Digital Display Input
[   965.376] (II) modeset(0): 8 bits per channel
[   965.376] (II) modeset(0): Digital interface is DisplayPort
[   965.376] (II) modeset(0): Max Image Size [cm]: horiz.: 35  vert.: 19
[   965.376] (II) modeset(0): Gamma: 2.20
[   965.376] (II) modeset(0): No DPMS capabilities specified
[   965.376] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   965.376] (II) modeset(0): Default color space is primary color space
[   965.376] (II) modeset(0): First detailed timing is preferred mode
[   965.376] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[   965.376] (II) modeset(0): redX: 0.640 redY: 0.329   greenX: 0.300 greenY: 0.600
[   965.376] (II) modeset(0): blueX: 0.149 blueY: 0.060   whiteX: 0.312 whiteY: 0.328
[   965.376] (II) modeset(0): Manufacturer's mask: 0
[   965.376] (II) modeset(0): Supported detailed timing:
[   965.376] (II) modeset(0): clock: 138.5 MHz   Image Size:  346 x 194 mm
[   965.376] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[   965.376] (II) modeset(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
[   965.376] (II) modeset(0):  1203MLQ156M1
[   965.376] (II) modeset(0): Unknown vendor-specific block 0
[   965.376] (II) modeset(0): EDID (in hex):
[   965.376] (II) modeset(0): 	00ffffffffffff004d10531400000000
[   965.376] (II) modeset(0): 	28190104a52313780ede50a3544c9926
[   965.376] (II) modeset(0): 	0f505400000001010101010101010101
[   965.376] (II) modeset(0): 	0101010101011a3680a070381f403020
[   965.376] (II) modeset(0): 	35005ac2100000180000000000000000
[   965.376] (II) modeset(0): 	00000000000000000000000000fe0031
[   965.376] (II) modeset(0): 	3230334d814c513135364d3100000000
[   965.376] (II) modeset(0): 	0002410328001200000a010a2020004a
[   965.376] (II) modeset(0): Printing probed modes for output eDP-1
[   965.376] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[   965.376] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[   965.376] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[   965.376] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[   965.376] (II) modeset(0): Modeline "1600x900"x120.0  246.00  1600 1728 1900 2200  900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[   965.376] (II) modeset(0): Modeline "1600x900"x119.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[   965.376] (II) modeset(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[   965.376] (II) modeset(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[   965.376] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[   965.376] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[   965.376] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[   965.376] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[   965.376] (II) modeset(0): Modeline "1440x810"x120.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[   965.376] (II) modeset(0): Modeline "1440x810"x119.9  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[   965.376] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[   965.376] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[   965.376] (II) modeset(0): Modeline "1280x800"x120.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[   965.376] (II) modeset(0): Modeline "1280x800"x119.9  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[   965.376] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[   965.376] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[   965.376] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[   965.376] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[   965.376] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[   965.376] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[   965.376] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[   965.376] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   965.376] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[   965.376] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[   965.376] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[   965.376] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[   965.376] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[   965.376] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[   965.376] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[   965.376] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[   965.376] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[   965.376] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[   965.376] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[   965.376] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[   965.376] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[   965.376] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[   965.377] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   965.377] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   965.377] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[   965.377] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[   965.377] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[   965.377] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[   965.377] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[   965.377] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[   965.377] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[   965.377] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[   965.377] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[   965.377] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[   965.377] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[   965.377] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   965.377] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[   965.377] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[   965.377] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[   965.377] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[   965.377] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[   965.377] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[   965.377] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[   965.377] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[   965.377] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[   965.377] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[   965.377] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[   965.377] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[   965.377] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[   965.377] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[   965.377] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[   965.377] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[   965.377] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[   965.377] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[   965.377] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[   965.377] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[   965.377] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[   965.377] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[   965.377] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[   965.377] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[   965.377] (II) modeset(0): EDID for output DP-1
[   965.380] (II) modeset(0): EDID for output HDMI-1
[   965.380] (II) modeset(0): EDID for output DP-2
[   965.384] (II) modeset(0): EDID for output HDMI-2
[   965.384] (II) modeset(0): Output eDP-1 connected
[   965.384] (II) modeset(0): Output DP-1 disconnected
[   965.384] (II) modeset(0): Output HDMI-1 disconnected
[   965.384] (II) modeset(0): Output DP-2 disconnected
[   965.384] (II) modeset(0): Output HDMI-2 disconnected
[   965.384] (II) modeset(0): Using exact sizes for initial modes
[   965.384] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[   965.384] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[   965.384] (==) modeset(0): DPI set to (96, 96)
[   965.384] (II) Loading sub module "fb"
[   965.384] (II) LoadModule: "fb"
[   965.384] (II) Loading /usr/lib/xorg/modules/libfb.so
[   965.385] (II) Module fb: vendor="X.Org Foundation"
[   965.385] 	compiled for 1.20.0, module version = 1.0.0
[   965.385] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   965.392] (==) modeset(0): Backing store enabled
[   965.392] (==) modeset(0): Silken mouse disabled
[   965.435] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[   965.436] (==) modeset(0): DPMS enabled
[   965.436] (II) modeset(0): [DRI2] Setup complete
[   965.436] (II) modeset(0): [DRI2]   DRI driver: i965
[   965.436] (II) modeset(0): [DRI2]   VDPAU driver: i965
[   965.436] (II) Initializing extension Generic Event Extension
[   965.436] (II) Initializing extension SHAPE
[   965.436] (II) Initializing extension MIT-SHM
[   965.436] (II) Initializing extension XInputExtension
[   965.436] (II) Initializing extension XTEST
[   965.436] (II) Initializing extension BIG-REQUESTS
[   965.436] (II) Initializing extension SYNC
[   965.436] (II) Initializing extension XKEYBOARD
[   965.436] (II) Initializing extension XC-MISC
[   965.436] (II) Initializing extension SECURITY
[   965.436] (II) Initializing extension XFIXES
[   965.436] (II) Initializing extension RENDER
[   965.436] (II) Initializing extension RANDR
[   965.436] (II) Initializing extension COMPOSITE
[   965.436] (II) Initializing extension DAMAGE
[   965.436] (II) Initializing extension MIT-SCREEN-SAVER
[   965.436] (II) Initializing extension DOUBLE-BUFFER
[   965.436] (II) Initializing extension RECORD
[   965.436] (II) Initializing extension DPMS
[   965.436] (II) Initializing extension Present
[   965.436] (II) Initializing extension DRI3
[   965.436] (II) Initializing extension X-Resource
[   965.436] (II) Initializing extension XVideo
[   965.436] (II) Initializing extension XVideo-MotionCompensation
[   965.436] (II) Initializing extension GLX
[   965.441] (II) AIGLX: Loaded and initialized i965
[   965.441] (II) GLX: Initialized DRI2 GL provider for screen 0
[   965.441] (II) Initializing extension XFree86-VidModeExtension
[   965.441] (II) Initializing extension XFree86-DGA
[   965.441] (II) Initializing extension XFree86-DRI
[   965.441] (II) Initializing extension DRI2
[   965.447] (II) modeset(0): Damage tracking initialized
[   965.447] (II) modeset(0): Setting screen physical size to 508 x 285
[   965.490] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   965.490] (II) No input driver specified, ignoring this device.
[   965.490] (II) This device may have been added with another device file.
[   965.491] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[   965.491] (II) No input driver specified, ignoring this device.
[   965.491] (II) This device may have been added with another device file.
[   965.491] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[   965.491] (II) No input driver specified, ignoring this device.
[   965.491] (II) This device may have been added with another device file.
[   965.492] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   965.492] (II) No input driver specified, ignoring this device.
[   965.492] (II) This device may have been added with another device file.
[   965.492] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[   965.492] (II) No input driver specified, ignoring this device.
[   965.492] (II) This device may have been added with another device file.
[   965.492] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[   965.492] (II) No input driver specified, ignoring this device.
[   965.492] (II) This device may have been added with another device file.
[   965.493] (II) config/udev: Adding input device Integrated_Webcam_HD: Integrate (/dev/input/event9)
[   965.493] (II) No input driver specified, ignoring this device.
[   965.493] (II) This device may have been added with another device file.
[   965.494] (II) config/udev: Adding input device Holtek USB Gaming Mouse (/dev/input/event8)
[   965.494] (II) No input driver specified, ignoring this device.
[   965.494] (II) This device may have been added with another device file.
[   965.494] (II) config/udev: Adding input device Holtek USB Gaming Mouse (/dev/input/event10)
[   965.494] (II) No input driver specified, ignoring this device.
[   965.494] (II) This device may have been added with another device file.
[   965.495] (II) config/udev: Adding input device Holtek USB Gaming Mouse (/dev/input/mouse0)
[   965.495] (II) No input driver specified, ignoring this device.
[   965.495] (II) This device may have been added with another device file.
[   965.495] (II) config/udev: Adding input device DLL07BE:01 06CB:7A13 Touchpad (/dev/input/event13)
[   965.495] (II) No input driver specified, ignoring this device.
[   965.495] (II) This device may have been added with another device file.
[   965.496] (II) config/udev: Adding input device DLL07BE:01 06CB:7A13 Touchpad (/dev/input/mouse1)
[   965.496] (II) No input driver specified, ignoring this device.
[   965.496] (II) This device may have been added with another device file.
[   965.496] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event14)
[   965.496] (II) No input driver specified, ignoring this device.
[   965.496] (II) This device may have been added with another device file.
[   965.496] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event15)
[   965.496] (II) No input driver specified, ignoring this device.
[   965.496] (II) This device may have been added with another device file.
[   965.497] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event16)
[   965.497] (II) No input driver specified, ignoring this device.
[   965.497] (II) This device may have been added with another device file.
[   965.497] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event17)
[   965.497] (II) No input driver specified, ignoring this device.
[   965.497] (II) This device may have been added with another device file.
[   965.497] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event18)
[   965.497] (II) No input driver specified, ignoring this device.
[   965.497] (II) This device may have been added with another device file.
[   965.497] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event19)
[   965.497] (II) No input driver specified, ignoring this device.
[   965.497] (II) This device may have been added with another device file.
[   965.498] (II) config/udev: Adding input device Intel HID events (/dev/input/event5)
[   965.498] (II) No input driver specified, ignoring this device.
[   965.498] (II) This device may have been added with another device file.
[   965.498] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
[   965.498] (II) No input driver specified, ignoring this device.
[   965.498] (II) This device may have been added with another device file.
[   965.499] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[   965.499] (II) No input driver specified, ignoring this device.
[   965.499] (II) This device may have been added with another device file.
[   965.499] (II) config/udev: Adding input device PS/2 Synaptics TouchPad (/dev/input/event20)
[   965.499] (II) No input driver specified, ignoring this device.
[   965.499] (II) This device may have been added with another device file.
[   965.499] (II) config/udev: Adding input device PS/2 Synaptics TouchPad (/dev/input/mouse2)
[   965.499] (II) No input driver specified, ignoring this device.
[   965.499] (II) This device may have been added with another device file.
[   965.500] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[   965.500] (II) No input driver specified, ignoring this device.
[   965.500] (II) This device may have been added with another device file.
[   965.776] (II) modeset(0): EDID vendor "SHP", prod id 5203
[   965.776] (II) modeset(0): Printing DDC gathered Modelines:
[   965.776] (II) modeset(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[   978.989] (II) Server terminated successfully (0). Closing log file.

The warnings/errors about fonts and ACPI seem to be normal (I think after research).

What I have tried so far to address the module errors:
  *Using the prior Xorg config.
  *Using the xorg.config template from xorg -configure
  *Deleting xorg.config and xorg.config.d
  *Reinstalling xorg-server xorg-xinit and bumblebee
          The previous log was generated under these circumstances.

If I log into root, su to my user and run startx, Xorg server terminates with an error without leaving the command line. The Xorg log is different after this method.

[   644.567] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[   644.569] 
X.Org X Server 1.20.0
X Protocol Version 11, Revision 0
[   644.573] Build Operating System: Linux Arch Linux
[   644.574] Current Operating System: Linux XPS 4.16.13-2-ARCH #1 SMP PREEMPT Fri Jun 1 18:46:11 UTC 2018 x86_64
[   644.574] Kernel command line: initrd=\initramfs-linux.img initrd=\intel-ucode.img root=LABEL=root rw
[   644.577] Build Date: 10 June 2018  09:45:02AM
[   644.578]  
[   644.579] Current version of pixman: 0.34.0
[   644.582] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[   644.582] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   644.586] (==) Log file: "/home/coba/.local/share/xorg/Xorg.0.log", Time: Wed Jun 13 00:52:10 2018
[   644.587] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   644.587] (==) No Layout section.  Using the first Screen section.
[   644.587] (==) No screen section available. Using defaults.
[   644.587] (**) |-->Screen "Default Screen Section" (0)
[   644.587] (**) |   |-->Monitor "<default monitor>"
[   644.587] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   644.587] (==) Automatically adding devices
[   644.587] (==) Automatically enabling devices
[   644.587] (==) Automatically adding GPU devices
[   644.587] (==) Automatically binding GPU devices
[   644.587] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   644.587] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[   644.587] 	Entry deleted from font path.
[   644.587] 	(Run 'mkfontdir' on "/usr/share/fonts/misc").
[   644.587] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF".
[   644.587] 	Entry deleted from font path.
[   644.587] 	(Run 'mkfontdir' on "/usr/share/fonts/OTF").
[   644.587] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   644.587] 	Entry deleted from font path.
[   644.587] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[   644.587] 	Entry deleted from font path.
[   644.587] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[   644.587] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[   644.587] 	Entry deleted from font path.
[   644.587] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[   644.587] (==) FontPath set to:
	/usr/share/fonts/TTF
[   644.587] (==) ModulePath set to "/usr/lib/xorg/modules"
[   644.587] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   644.587] (II) Module ABI versions:
[   644.588] 	X.Org ANSI C Emulation: 0.4
[   644.588] 	X.Org Video Driver: 24.0
[   644.588] 	X.Org XInput driver : 24.1
[   644.588] 	X.Org Server Extension : 10.0
[   644.588] (++) using VT number 1

[   644.589] (EE) systemd-logind: TakeControl failed: Only owner of session may take control
[   644.589] (II) xfree86: Adding drm device (/dev/dri/card0)
[   644.591] (--) PCI:*(0@0:2:0) 8086:591b:1028:07be rev 4, Mem @ 0xeb000000/16777216, 0x80000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[   644.591] (--) PCI: (1@0:0:0) 10de:1c8d:1028:07be rev 161, Mem @ 0xec000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[   644.591] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   644.591] (II) LoadModule: "glx"
[   644.591] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   644.592] (II) Module glx: vendor="X.Org Foundation"
[   644.592] 	compiled for 1.20.0, module version = 1.0.0
[   644.592] 	ABI class: X.Org Server Extension, version 10.0
[   644.592] (==) Matched intel as autoconfigured driver 0
[   644.592] (==) Matched modesetting as autoconfigured driver 1
[   644.592] (==) Matched fbdev as autoconfigured driver 2
[   644.592] (==) Matched vesa as autoconfigured driver 3
[   644.592] (==) Assigned the driver to the xf86ConfigLayout
[   644.592] (II) LoadModule: "intel"
[   644.592] (WW) Warning, couldn't open module intel
[   644.592] (EE) Failed to load module "intel" (module does not exist, 0)
[   644.592] (II) LoadModule: "modesetting"
[   644.592] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   644.592] (II) Module modesetting: vendor="X.Org Foundation"
[   644.592] 	compiled for 1.20.0, module version = 1.20.0
[   644.592] 	Module class: X.Org Video Driver
[   644.592] 	ABI class: X.Org Video Driver, version 24.0
[   644.592] (II) LoadModule: "fbdev"
[   644.592] (WW) Warning, couldn't open module fbdev
[   644.592] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   644.592] (II) LoadModule: "vesa"
[   644.592] (WW) Warning, couldn't open module vesa
[   644.592] (EE) Failed to load module "vesa" (module does not exist, 0)
[   644.592] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   644.592] (EE) 
Fatal server error:
[   644.595] (EE) xf86OpenConsole: Cannot open virtual console 1 (Permission denied)
[   644.596] (EE) 
[   644.598] (EE) 
Please consult the The X.Org Foundation support 
	 at [url]http://wiki.x.org[/url]
 for help. 
[   644.602] (EE) Please also check the log file at "/home/coba/.local/share/xorg/Xorg.0.log" for additional information.
[   644.603] (EE) 
[   644.604] (WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
[   644.604] (WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor
[   644.604] (EE) Server terminated with error (1). Closing log file.

The fonts, ACPI and module errors are present aswell, but there are two new: the systemd-logind one and the virtual console one.  I have been unable to find solutions to try for them.

If I cannot get this working I will reinstall arch.

Excuse my English if it has not been precise. I will gladly provide any additional output / config.

Thank you in advance for your assistance and time.

Last edited by halpls (2018-06-14 08:33:01)

Offline

#2 2018-06-13 00:45:33

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 20,122
Website

Re: [Solved] No input after login into Xorg.

Don't worry about the second log failing: that would not be expected to work, you cannot run X without a proper login session which you do not get when su'ing from root.

The first log doesn't have anything that jumps out as problematic*: it looks like Xorg is running just fine - and it does so for 23 seconds (presumably that's how long you let it run before shutting down).  So you can log in to Xorg.  Can you elaborate on the actual symptoms, what does "a disfigured version of my setup" look like?  Disfigured in what way?  Is the resolution wrong?  Is the color wrong?

Can you post your ~/.xinitrc.  And can you try just starting a terminal from xinitrc and nothing else to see if it really is a problem running X or just some WM configuration issue.

*nothing jumps out to me as problematic, but I don't have experience with hybrid graphics.

Last edited by Trilby (2018-06-13 00:46:32)


"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#3 2018-06-13 02:08:41

axiome
Member
Registered: 2016-10-11
Posts: 3

Re: [Solved] No input after login into Xorg.

I had a problem with last update too, I got stuck at boot, I think something with Nvidia drivers is not right.
The commands belew might help you identify the problems :

systemctl --failed
dmesg

For the moment i just did a temporary fix by downgrading all the packages to a previous snapshot from the archive.

Offline

#4 2018-06-13 10:58:45

halpls
Member
Registered: 2018-06-12
Posts: 8

Re: [Solved] No input after login into Xorg.

Trilby wrote:

what does "a disfigured version of my setup" look like?

There appear to be some programs started (Gimp, numberlines from vim, my clipboard manager), but it is all stripped in weird lines. This surpraises me because none of this programs are configured to start automatically. The mouse is static in the middle and the keyboard does not work (appart from the keyboard-light). Color and resolution seem to be fine.

Here is a link to a photo of the screen.
https://imgur.com/a/U0L1LY1

Trilby wrote:

can you try just starting a terminal from xinitrc

If I rename my .xinitrc file Xorg really does not boot and kicks me out to the login screen. The log error is the same but with different numbers in brackets, so I assume is a timestamp.

Trilby wrote:

Can you post your ~/.xinitrc.

#!/bin/sh

userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/.Xresources
sysmodmap=/etc/X11/xinit/.Xmodmap

# merge in defaults and keymaps

if [ -f $sysresources ]; then







    xrdb -merge $sysresources

fi

if [ -f $sysmodmap ]; then
    xmodmap $sysmodmap
fi

if [ -f "$userresources" ]; then







    xrdb -merge "$userresources"

fi

if [ -f "$usermodmap" ]; then
    xmodmap "$usermodmap"
fi

# start some nice programs

if [ -d /etc/X11/xinit/xinitrc.d ] ; then
 for f in /etc/X11/xinit/xinitrc.d/?*.sh ; do
  [ -x "$f" ] && . "$f"
 done
 unset f
fi
setxkbmap -layout es &
setxkbmap -option caps:escape &
xbindkeys -p &
exec i3
axiome wrote:

systemctl --failed

"0 loaded units listed". The same result if I add the --all flag.

axiome wrote:

dmesg

[    0.000000] Linux version 4.16.13-2-ARCH (builduser@bpiotrowski) (gcc version 8.1.1 20180531 (GCC)) #1 SMP PREEMPT Fri Jun 1 18:46:11 UTC 2018
[    0.000000] Command line: initrd=\initramfs-linux.img initrd=\intel-ucode.img root=LABEL=root rw
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000667c3fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000667c4000-0x00000000667c4fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000667c5000-0x00000000667c5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000667c6000-0x0000000078454fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078455000-0x0000000078811fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000078812000-0x0000000078858fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000078859000-0x0000000078f39fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000078f3a000-0x00000000795fefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000795ff000-0x00000000795fffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079600000-0x000000007f7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047e7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x62f6e018-0x62f97257] usable ==> usable
[    0.000000] e820: update [mem 0x62f6e018-0x62f97257] usable ==> usable
[    0.000000] e820: update [mem 0x62f5d018-0x62f6d057] usable ==> usable
[    0.000000] e820: update [mem 0x62f5d018-0x62f6d057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000062f5d017] usable
[    0.000000] reserve setup_data: [mem 0x0000000062f5d018-0x0000000062f6d057] usable
[    0.000000] reserve setup_data: [mem 0x0000000062f6d058-0x0000000062f6e017] usable
[    0.000000] reserve setup_data: [mem 0x0000000062f6e018-0x0000000062f97257] usable
[    0.000000] reserve setup_data: [mem 0x0000000062f97258-0x00000000667c3fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000667c4000-0x00000000667c4fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000667c5000-0x00000000667c5fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000667c6000-0x0000000078454fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000078455000-0x0000000078811fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000078812000-0x0000000078858fff] ACPI data
[    0.000000] reserve setup_data: [mem 0x0000000078859000-0x0000000078f39fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000078f3a000-0x00000000795fefff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000795ff000-0x00000000795fffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000079600000-0x000000007f7fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000047e7fffff] usable
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi:  ACPI=0x78821000  ACPI 2.0=0x78821000  SMBIOS=0xf0000  SMBIOS 3.0=0xf0020  ESRT=0x792d2018  MEMATTR=0x75e02298  TPMEventLog=0x66872018 
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Dell Inc. XPS 15 9560/05FFDN, BIOS 1.9.4 04/23/2018
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x47e800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000000]   1 base 007C000000 mask 7FFC000000 uncachable
[    0.000000]   2 base 007B000000 mask 7FFF000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x79600 max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x00000000792d2018 to 0x00000000792d2050.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x448655000, 0x448655fff] PGTABLE
[    0.000000] BRK [0x448656000, 0x448656fff] PGTABLE
[    0.000000] BRK [0x448657000, 0x448657fff] PGTABLE
[    0.000000] BRK [0x448658000, 0x448658fff] PGTABLE
[    0.000000] BRK [0x448659000, 0x448659fff] PGTABLE
[    0.000000] BRK [0x44865a000, 0x44865afff] PGTABLE
[    0.000000] BRK [0x44865b000, 0x44865bfff] PGTABLE
[    0.000000] BRK [0x44865c000, 0x44865cfff] PGTABLE
[    0.000000] BRK [0x44865d000, 0x44865dfff] PGTABLE
[    0.000000] Secure boot disabled
[    0.000000] RAMDISK: [mem 0x47df0e000-0x47e7fffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x0000000078821000 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x00000000788210D0 00011C (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x0000000078846BB0 00010C (v05 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x0000000078821278 025936 (v02 DELL   CBX3     01072009 INTL 20160422)
[    0.000000] ACPI: FACS 0x0000000078F37180 000040
[    0.000000] ACPI: APIC 0x0000000078846CC0 0000BC (v03 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x0000000078846D80 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x0000000078846DC8 0000AC (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x0000000078846E78 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x0000000078846EB8 000038 (v01 DELL   CBX3     01072009 AMI. 0005000B)
[    0.000000] ACPI: SSDT 0x0000000078846EF0 0004B8 (v01 SataRe SataTabl 00001000 INTL 20160422)
[    0.000000] ACPI: BOOT 0x00000000788473A8 000028 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000788473D0 0012FE (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x00000000788486D0 002959 (v02 PegSsd PegSsdt  00001000 INTL 20160422)
[    0.000000] ACPI: HPET 0x000000007884B030 000038 (v01 INTEL  KBL      00000001 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000007884B068 000B8C (v02 INTEL  xh_rvp11 00000000 INTL 20160422)
[    0.000000] ACPI: UEFI 0x000000007884BBF8 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: SSDT 0x000000007884BC40 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.000000] ACPI: LPIT 0x000000007884CB20 000094 (v01 INTEL  KBL      00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000007884CBB8 00011E (v02 INTEL  HdaDsp   00000000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000007884CCD8 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000007884CF78 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000007884FF80 00050D (v02 INTEL  TbtTypeC 00000000 INTL 20160422)
[    0.000000] ACPI: DBGP 0x0000000078850490 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x00000000788504C8 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x0000000078850520 005322 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[    0.000000] ACPI: MSDM 0x0000000078855848 000055 (v03 DELL   CBX3     06222004 AMI  00010013)
[    0.000000] ACPI: SLIC 0x00000000788558A0 000176 (v03 DELL   CBX3     01072009 MSFT 00010013)
[    0.000000] ACPI: SSDT 0x0000000078855A18 0000AE (v02 SgRef  SgPeg    00001000 INTL 20160422)
[    0.000000] ACPI: NHLT 0x0000000078855AC8 00002D (v00 INTEL  EDK2     00000002      01000013)
[    0.000000] ACPI: BGRT 0x0000000078855AF8 000038 (v00 ??\xebz            01072009 AMI  00010013)
[    0.000000] ACPI: TPM2 0x0000000078855B30 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
[    0.000000] ACPI: SSDT 0x0000000078855B68 001C70 (v01 OptRef OptTabl  00001000 INTL 20160422)
[    0.000000] ACPI: ASF! 0x00000000788577D8 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.000000] ACPI: DMAR 0x0000000078857878 0000F0 (v01 INTEL  KBL      00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000047e7fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x47df0a000-0x47df0dfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000047e7fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000667c3fff]
[    0.000000]   node   0: [mem 0x00000000667c6000-0x0000000078454fff]
[    0.000000]   node   0: [mem 0x00000000795ff000-0x00000000795fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000047e7fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047e7fffff]
[    0.000000] On node 0 totalpages: 4156400
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7634 pages used for memmap
[    0.000000]   DMA32 zone: 488532 pages, LIFO batch:31
[    0.000000]   Normal zone: 57248 pages used for memmap
[    0.000000]   Normal zone: 3663872 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 99 pages
[    0.000000] Reserving Intel graphics memory at [mem 0x7b800000-0x7f7fffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x62f5d000-0x62f5dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x62f6d000-0x62f6dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x62f6e000-0x62f6efff]
[    0.000000] PM: Registered nosave memory: [mem 0x62f97000-0x62f97fff]
[    0.000000] PM: Registered nosave memory: [mem 0x667c4000-0x667c4fff]
[    0.000000] PM: Registered nosave memory: [mem 0x667c5000-0x667c5fff]
[    0.000000] PM: Registered nosave memory: [mem 0x78455000-0x78811fff]
[    0.000000] PM: Registered nosave memory: [mem 0x78812000-0x78858fff]
[    0.000000] PM: Registered nosave memory: [mem 0x78859000-0x78f39fff]
[    0.000000] PM: Registered nosave memory: [mem 0x78f3a000-0x795fefff]
[    0.000000] PM: Registered nosave memory: [mem 0x79600000-0x7f7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f800000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x7f800000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x95/0x4da with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4091433
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: initrd=\initramfs-linux.img initrd=\intel-ucode.img root=LABEL=root rw
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16221364K/16625600K available (10252K kernel code, 1261K rwdata, 3408K rodata, 1456K init, 640K bss, 404236K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 31757 entries in 125 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: .
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180105
[    0.000000] ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.XHC.RHUB.HS11], AE_NOT_FOUND (20180105/dswload-211)
[    0.000000] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20180105/psobject-252)
[    0.000000] ACPI Error: AE_NOT_FOUND, (SSDT:xh_rvp11) while loading table (20180105/tbxfload-228)
[    0.000000] ACPI Error: 1 table load failures, 12 successful (20180105/tbxfload-246)
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.003333] APIC: Switch to symmetric I/O mode setup
[    0.003333] DMAR: Host address width 39
[    0.003333] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.003333] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.003333] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.003333] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.003333] DMAR: RMRR base: 0x0000007852d000 end: 0x0000007854cfff
[    0.003333] DMAR: RMRR base: 0x0000007b000000 end: 0x0000007f7fffff
[    0.003333] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.003333] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.003333] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.003333] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.003333] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.003333] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.003333] x2apic enabled
[    0.003333] Switched APIC routing to cluster x2apic.
[    0.006666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.023333] tsc: Detected 2800.000 MHz processor
[    0.023333] tsc: Detected 2808.000 MHz TSC
[    0.023333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2879c5f06f2, max_idle_ns: 440795220049 ns
[    0.023333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5618.00 BogoMIPS (lpj=9360000)
[    0.023333] pid_max: default: 32768 minimum: 301
[    0.023333] Security Framework initialized
[    0.023333] Yama: becoming mindful.
[    0.023333] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.026700] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.026734] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.026761] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.026927] CPU: Physical Processor ID: 0
[    0.026927] CPU: Processor Core ID: 0
[    0.026931] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.026932] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.026936] mce: CPU supports 10 MCE banks
[    0.026944] CPU0: Thermal monitoring enabled (TM1)
[    0.026962] process: using mwait in idle threads
[    0.026964] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.026965] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.026966] Spectre V2 : Mitigation: Full generic retpoline
[    0.026966] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.026967] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.026967] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.026968] Speculative Store Bypass: Vulnerable
[    0.027034] Freeing SMP alternatives memory: 24K
[    0.029073] TSC deadline timer enabled
[    0.029077] smpboot: CPU0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[    0.040018] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.040090] ... version:                4
[    0.040091] ... bit width:              48
[    0.040091] ... generic registers:      4
[    0.040092] ... value mask:             0000ffffffffffff
[    0.040093] ... max period:             00007fffffffffff
[    0.040093] ... fixed-purpose events:   3
[    0.040094] ... event mask:             000000070000000f
[    0.046674] Hierarchical SRCU implementation.
[    0.066921] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.073341] smp: Bringing up secondary CPUs ...
[    0.103363] x86: Booting SMP configuration:
[    0.103366] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.283748] smp: Brought up 1 node, 8 CPUs
[    0.283748] smpboot: Max logical packages: 1
[    0.283748] smpboot: Total of 8 processors activated (44945.00 BogoMIPS)
[    0.287040] devtmpfs: initialized
[    0.287040] x86/mm: Memory block size: 128MB
[    0.287668] PM: Registering ACPI NVS region [mem 0x667c4000-0x667c4fff] (4096 bytes)
[    0.287668] PM: Registering ACPI NVS region [mem 0x78859000-0x78f39fff] (7213056 bytes)
[    0.287668] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.287668] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.287668] pinctrl core: initialized pinctrl subsystem
[    0.287668] RTC time:  9:57:12, date: 06/13/18
[    0.287668] NET: Registered protocol family 16
[    0.287668] cpuidle: using governor ladder
[    0.287668] cpuidle: using governor menu
[    0.287668] Simple Boot Flag at 0x47 set to 0x80
[    0.287668] KVM setup pv remote TLB flush
[    0.287668] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.287668] ACPI: bus type PCI registered
[    0.287668] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.287668] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.287668] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.287668] PCI: Using configuration type 1 for base access
[    0.287668] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.287668] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.290102] ACPI: Added _OSI(Module Device)
[    0.290103] ACPI: Added _OSI(Processor Device)
[    0.290104] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.290104] ACPI: Added _OSI(Processor Aggregator Device)
[    0.291611] ACPI: Executed 38 blocks of module-level executable AML code
[    5.307352] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    5.317565] ACPI: Dynamic OEM Table Load:
[    5.317572] ACPI: SSDT 0xFFFF9B7B6AD22000 000651 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    5.317852] ACPI: Executed 1 blocks of module-level executable AML code
[    5.317935] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    5.319099] ACPI: Dynamic OEM Table Load:
[    5.319104] ACPI: SSDT 0xFFFF9B7B6A835800 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    5.319360] ACPI: Executed 1 blocks of module-level executable AML code
[    5.319908] ACPI: Dynamic OEM Table Load:
[    5.319914] ACPI: SSDT 0xFFFF9B7B6AD21000 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
[    5.320487] ACPI: Executed 1 blocks of module-level executable AML code
[    5.320727] ACPI: Dynamic OEM Table Load:
[    5.320732] ACPI: SSDT 0xFFFF9B7B6A829400 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    5.320991] ACPI: Executed 1 blocks of module-level executable AML code
[    5.324210] ACPI: EC: EC started
[    5.324211] ACPI: EC: interrupt blocked
[    5.328332] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[    5.328334] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    5.328336] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
[    5.328336] ACPI: Interpreter enabled
[    5.328382] ACPI: (supports S0 S3 S4 S5)
[    5.328383] ACPI: Using IOAPIC for interrupt routing
[    5.328422] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    5.329118] ACPI: GPE 0x42 active on init
[    5.329175] ACPI: Enabled 8 GPEs in block 00 to 7F
[    5.338536] ACPI: Power Resource [PG00] (on)
[    5.360505] ACPI: Power Resource [PG01] (on)
[    5.360916] ACPI: Power Resource [PG02] (on)
[    5.362736] ACPI: Power Resource [WRST] (on)
[    5.362736] ACPI: Power Resource [WRST] (on)
[    5.362736] ACPI: Power Resource [WRST] (on)
[    5.362736] ACPI: Power Resource [WRST] (on)
[    5.362736] ACPI: Power Resource [WRST] (on)
[    5.362828] ACPI: Power Resource [WRST] (on)
[    5.363243] ACPI: Power Resource [WRST] (on)
[    5.363660] ACPI: Power Resource [WRST] (on)
[    5.364083] ACPI: Power Resource [WRST] (on)
[    5.364498] ACPI: Power Resource [WRST] (on)
[    5.364907] ACPI: Power Resource [WRST] (on)
[    5.365319] ACPI: Power Resource [WRST] (on)
[    5.365730] ACPI: Power Resource [WRST] (on)
[    5.366139] ACPI: Power Resource [WRST] (on)
[    5.366549] ACPI: Power Resource [WRST] (on)
[    5.366964] ACPI: Power Resource [WRST] (on)
[    5.367374] ACPI: Power Resource [WRST] (on)
[    5.368943] ACPI: Power Resource [WRST] (on)
[    5.369368] ACPI: Power Resource [WRST] (on)
[    5.369777] ACPI: Power Resource [WRST] (on)
[    5.393631] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[    5.393637] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    5.394129] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    5.394602] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    5.394603] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    5.395405] PCI host bridge to bus 0000:00
[    5.395407] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    5.395409] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    5.395410] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    5.395411] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    5.395412] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    5.395413] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    5.395414] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    5.395415] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    5.395417] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    5.395418] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    5.395419] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    5.395420] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xefffffff window]
[    5.395421] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    5.395423] pci_bus 0000:00: root bus resource [bus 00-7e]
[    5.395430] pci 0000:00:00.0: [8086:5910] type 00 class 0x060000
[    5.395565] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    5.395606] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    5.395809] pci 0000:00:02.0: [8086:591b] type 00 class 0x030000
[    5.395819] pci 0000:00:02.0: reg 0x10: [mem 0xeb000000-0xebffffff 64bit]
[    5.395825] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    5.395829] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    5.395843] pci 0000:00:02.0: BAR 2: assigned to efifb
[    5.395985] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    5.395996] pci 0000:00:04.0: reg 0x10: [mem 0xed120000-0xed127fff 64bit]
[    5.396222] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    5.396255] pci 0000:00:14.0: reg 0x10: [mem 0xed110000-0xed11ffff 64bit]
[    5.396357] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    5.396598] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    5.396625] pci 0000:00:14.2: reg 0x10: [mem 0xed138000-0xed138fff 64bit]
[    5.396902] pci 0000:00:15.0: [8086:a160] type 00 class 0x118000
[    5.397141] pci 0000:00:15.0: reg 0x10: [mem 0xed137000-0xed137fff 64bit]
[    5.398038] pci 0000:00:15.1: [8086:a161] type 00 class 0x118000
[    5.398289] pci 0000:00:15.1: reg 0x10: [mem 0xed136000-0xed136fff 64bit]
[    5.399080] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    5.399100] pci 0000:00:16.0: reg 0x10: [mem 0xed135000-0xed135fff 64bit]
[    5.399176] pci 0000:00:16.0: PME# supported from D3hot
[    5.399374] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
[    5.399405] pci 0000:00:17.0: reg 0x10: [mem 0xed130000-0xed131fff]
[    5.399417] pci 0000:00:17.0: reg 0x14: [mem 0xed134000-0xed1340ff]
[    5.399443] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    5.399456] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    5.399464] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    5.399490] pci 0000:00:17.0: reg 0x24: [mem 0xed133000-0xed1337ff]
[    5.399570] pci 0000:00:17.0: PME# supported from D3hot
[    5.399737] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[    5.399835] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    5.400036] pci 0000:00:1c.1: [8086:a111] type 01 class 0x060400
[    5.400125] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    5.400347] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[    5.400437] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    5.400643] pci 0000:00:1d.4: [8086:a11c] type 01 class 0x060400
[    5.400742] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
[    5.400939] pci 0000:00:1d.6: [8086:a11e] type 01 class 0x060400
[    5.401047] pci 0000:00:1d.6: PME# supported from D0 D3hot D3cold
[    5.401247] pci 0000:00:1f.0: [8086:a152] type 00 class 0x060100
[    5.401499] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    5.401517] pci 0000:00:1f.2: reg 0x10: [mem 0xed12c000-0xed12ffff]
[    5.401713] pci 0000:00:1f.3: [8086:a171] type 00 class 0x040380
[    5.401743] pci 0000:00:1f.3: reg 0x10: [mem 0xed128000-0xed12bfff 64bit]
[    5.401770] pci 0000:00:1f.3: reg 0x20: [mem 0xed100000-0xed10ffff 64bit]
[    5.401823] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    5.402054] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    5.402115] pci 0000:00:1f.4: reg 0x10: [mem 0xed132000-0xed1320ff 64bit]
[    5.402185] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    5.402440] pci 0000:01:00.0: [10de:1c8d] type 00 class 0x030200
[    5.402454] pci 0000:01:00.0: reg 0x10: [mem 0xec000000-0xecffffff]
[    5.402461] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    5.402469] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    5.402474] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    5.402479] pci 0000:01:00.0: reg 0x30: [mem 0xed000000-0xed07ffff pref]
[    5.410035] pci 0000:00:01.0: PCI bridge to [bus 01]
[    5.410042] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    5.410060] pci 0000:00:01.0:   bridge window [mem 0xec000000-0xed0fffff]
[    5.410063] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    5.410293] pci 0000:02:00.0: [168c:003e] type 00 class 0x028000
[    5.410538] pci 0000:02:00.0: reg 0x10: [mem 0xed200000-0xed3fffff 64bit]
[    5.411235] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    5.420213] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    5.420221] pci 0000:00:1c.0:   bridge window [mem 0xed200000-0xed3fffff]
[    5.420357] acpiphp: Slot [1] registered
[    5.420377] pci 0000:03:00.0: [10ec:525a] type 00 class 0xff0000
[    5.420414] pci 0000:03:00.0: reg 0x14: [mem 0xed400000-0xed400fff]
[    5.420539] pci 0000:03:00.0: supports D1 D2
[    5.420540] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    5.430061] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    5.430065] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    5.430069] pci 0000:00:1c.1:   bridge window [mem 0xed400000-0xeddfffff]
[    5.430077] pci 0000:00:1c.1:   bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
[    5.430213] pci 0000:04:00.0: [1c5c:1284] type 00 class 0x010802
[    5.430255] pci 0000:04:00.0: reg 0x10: [mem 0xede00000-0xede03fff 64bit]
[    5.430412] pci 0000:04:00.0: PME# supported from D0 D1 D3hot
[    5.440059] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    5.440067] pci 0000:00:1d.0:   bridge window [mem 0xede00000-0xedefffff]
[    5.440200] acpiphp: Slot [1-1] registered
[    5.440205] pci 0000:00:1d.4: PCI bridge to [bus 05]
[    5.440358] pci 0000:06:00.0: [8086:1576] type 01 class 0x060400
[    5.440431] pci 0000:06:00.0: enabling Extended Tags
[    5.440537] pci 0000:06:00.0: supports D1 D2
[    5.440538] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    5.440717] pci 0000:00:1d.6: PCI bridge to [bus 06-3e]
[    5.440725] pci 0000:00:1d.6:   bridge window [mem 0xd4000000-0xea0fffff]
[    5.440732] pci 0000:00:1d.6:   bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[    5.440796] pci 0000:07:00.0: [8086:1576] type 01 class 0x060400
[    5.440871] pci 0000:07:00.0: enabling Extended Tags
[    5.440975] pci 0000:07:00.0: supports D1 D2
[    5.440976] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    5.441071] pci 0000:07:01.0: [8086:1576] type 01 class 0x060400
[    5.441145] pci 0000:07:01.0: enabling Extended Tags
[    5.441248] pci 0000:07:01.0: supports D1 D2
[    5.441249] pci 0000:07:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    5.441341] pci 0000:07:02.0: [8086:1576] type 01 class 0x060400
[    5.441415] pci 0000:07:02.0: enabling Extended Tags
[    5.441518] pci 0000:07:02.0: supports D1 D2
[    5.441519] pci 0000:07:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    5.441637] pci 0000:06:00.0: PCI bridge to [bus 07-3e]
[    5.441647] pci 0000:06:00.0:   bridge window [mem 0xd4000000-0xea0fffff]
[    5.441654] pci 0000:06:00.0:   bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[    5.441701] pci 0000:07:00.0: PCI bridge to [bus 08]
[    5.441711] pci 0000:07:00.0:   bridge window [mem 0xea000000-0xea0fffff]
[    5.441763] pci 0000:07:01.0: PCI bridge to [bus 09-3d]
[    5.441773] pci 0000:07:01.0:   bridge window [mem 0xd4000000-0xe9efffff]
[    5.441781] pci 0000:07:01.0:   bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[    5.441842] pci 0000:3e:00.0: [8086:15b5] type 00 class 0x0c0330
[    5.441880] pci 0000:3e:00.0: reg 0x10: [mem 0xe9f00000-0xe9f0ffff]
[    5.441954] pci 0000:3e:00.0: enabling Extended Tags
[    5.442065] pci 0000:3e:00.0: supports D1 D2
[    5.442066] pci 0000:3e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    5.442233] pci 0000:07:02.0: PCI bridge to [bus 3e]
[    5.442243] pci 0000:07:02.0:   bridge window [mem 0xe9f00000-0xe9ffffff]
[    5.445146] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    5.445214] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    5.445279] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    5.445343] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    5.445408] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    5.445472] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    5.445536] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    5.445600] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    5.448264] ACPI: EC: interrupt unblocked
[    5.448281] ACPI: EC: event unblocked
[    5.448309] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    5.448311] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
[    5.448379] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    5.448379] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    5.448379] pci 0000:00:02.0: vgaarb: bridge control possible
[    5.448379] vgaarb: loaded
[    5.448379] EDAC MC: Ver: 3.0.0
[    5.448379] Registered efivars operations
[    5.462290] PCI: Using ACPI for IRQ routing
[    5.472200] PCI: pci_cache_line_size set to 64 bytes
[    5.472420] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    5.472421] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    5.472422] e820: reserve RAM buffer [mem 0x62f5d018-0x63ffffff]
[    5.472423] e820: reserve RAM buffer [mem 0x62f6e018-0x63ffffff]
[    5.472424] e820: reserve RAM buffer [mem 0x667c4000-0x67ffffff]
[    5.472425] e820: reserve RAM buffer [mem 0x78455000-0x7bffffff]
[    5.472426] e820: reserve RAM buffer [mem 0x79600000-0x7bffffff]
[    5.472427] e820: reserve RAM buffer [mem 0x47e800000-0x47fffffff]
[    5.472496] NetLabel: Initializing
[    5.472496] NetLabel:  domain hash size = 128
[    5.472497] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    5.472512] NetLabel:  unlabeled traffic allowed by default
[    5.472517] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    5.472517] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    5.474363] clocksource: Switched to clocksource tsc-early
[    5.481092] VFS: Disk quotas dquot_6.6.0
[    5.481104] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    5.481158] pnp: PnP ACPI init
[    5.481405] system 00:00: [io  0x0680-0x069f] has been reserved
[    5.481407] system 00:00: [io  0xffff] has been reserved
[    5.481409] system 00:00: [io  0xffff] has been reserved
[    5.481410] system 00:00: [io  0xffff] has been reserved
[    5.481411] system 00:00: [io  0x1800-0x18fe] has been reserved
[    5.481413] system 00:00: [io  0x164e-0x164f] has been reserved
[    5.481417] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    5.481518] system 00:01: [io  0x0800-0x087f] has been reserved
[    5.481521] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    5.481540] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    5.481582] system 00:03: [io  0x1854-0x1857] has been reserved
[    5.481585] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    5.481742] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    5.481758] pnp 00:05: Plug and Play ACPI device, IDs DLL07be PNP0f13 (active)
[    5.482018] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    5.482019] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    5.482021] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    5.482022] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved
[    5.482024] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    5.482025] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    5.482026] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    5.482028] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    5.482029] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    5.482031] system 00:06: [mem 0xeffe0000-0xefffffff] has been reserved
[    5.482034] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    5.482077] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[    5.482078] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[    5.482080] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[    5.482081] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    5.482082] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[    5.482084] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    5.482085] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[    5.482088] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    5.482440] system 00:08: [io  0xff00-0xfffe] has been reserved
[    5.482443] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    5.483878] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    5.483880] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    5.483881] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[    5.483885] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    5.486927] pnp: PnP ACPI: found 10 devices
[    5.492479] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    5.492544] pci 0000:07:01.0: bridge window [io  0x1000-0x0fff] to [bus 09-3d] add_size 1000
[    5.492554] pci 0000:07:02.0: bridge window [io  0x1000-0x0fff] to [bus 3e] add_size 1000
[    5.492556] pci 0000:07:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3e] add_size 200000 add_align 100000
[    5.492567] pci 0000:06:00.0: bridge window [io  0x1000-0x0fff] to [bus 07-3e] add_size 2000
[    5.492577] pci 0000:00:1d.6: bridge window [io  0x1000-0x0fff] to [bus 06-3e] add_size 2000
[    5.492582] pci 0000:00:1d.6: BAR 13: assigned [io  0x2000-0x3fff]
[    5.492584] pci 0000:00:01.0: PCI bridge to [bus 01]
[    5.492585] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    5.492588] pci 0000:00:01.0:   bridge window [mem 0xec000000-0xed0fffff]
[    5.492590] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    5.492594] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    5.492599] pci 0000:00:1c.0:   bridge window [mem 0xed200000-0xed3fffff]
[    5.492609] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    5.492612] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    5.492618] pci 0000:00:1c.1:   bridge window [mem 0xed400000-0xeddfffff]
[    5.492622] pci 0000:00:1c.1:   bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
[    5.492629] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    5.492634] pci 0000:00:1d.0:   bridge window [mem 0xede00000-0xedefffff]
[    5.492644] pci 0000:00:1d.4: PCI bridge to [bus 05]
[    5.492659] pci 0000:06:00.0: BAR 13: assigned [io  0x2000-0x3fff]
[    5.492664] pci 0000:07:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    5.492666] pci 0000:07:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    5.492667] pci 0000:07:01.0: BAR 13: assigned [io  0x2000-0x2fff]
[    5.492668] pci 0000:07:02.0: BAR 13: assigned [io  0x3000-0x3fff]
[    5.492671] pci 0000:07:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    5.492672] pci 0000:07:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    5.492673] pci 0000:07:00.0: PCI bridge to [bus 08]
[    5.492679] pci 0000:07:00.0:   bridge window [mem 0xea000000-0xea0fffff]
[    5.492689] pci 0000:07:01.0: PCI bridge to [bus 09-3d]
[    5.492692] pci 0000:07:01.0:   bridge window [io  0x2000-0x2fff]
[    5.492697] pci 0000:07:01.0:   bridge window [mem 0xd4000000-0xe9efffff]
[    5.492701] pci 0000:07:01.0:   bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[    5.492708] pci 0000:07:02.0: PCI bridge to [bus 3e]
[    5.492711] pci 0000:07:02.0:   bridge window [io  0x3000-0x3fff]
[    5.492716] pci 0000:07:02.0:   bridge window [mem 0xe9f00000-0xe9ffffff]
[    5.492726] pci 0000:06:00.0: PCI bridge to [bus 07-3e]
[    5.492729] pci 0000:06:00.0:   bridge window [io  0x2000-0x3fff]
[    5.492734] pci 0000:06:00.0:   bridge window [mem 0xd4000000-0xea0fffff]
[    5.492738] pci 0000:06:00.0:   bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[    5.492745] pci 0000:00:1d.6: PCI bridge to [bus 06-3e]
[    5.492748] pci 0000:00:1d.6:   bridge window [io  0x2000-0x3fff]
[    5.492753] pci 0000:00:1d.6:   bridge window [mem 0xd4000000-0xea0fffff]
[    5.492757] pci 0000:00:1d.6:   bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[    5.492765] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    5.492767] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    5.492768] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    5.492769] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    5.492770] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    5.492771] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    5.492773] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    5.492774] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    5.492775] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    5.492776] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    5.492777] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    5.492779] pci_bus 0000:00: resource 15 [mem 0x7f800000-0xefffffff window]
[    5.492780] pci_bus 0000:00: resource 16 [mem 0xfd000000-0xfe7fffff window]
[    5.492781] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    5.492782] pci_bus 0000:01: resource 1 [mem 0xec000000-0xed0fffff]
[    5.492783] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    5.492785] pci_bus 0000:02: resource 1 [mem 0xed200000-0xed3fffff]
[    5.492786] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    5.492787] pci_bus 0000:03: resource 1 [mem 0xed400000-0xeddfffff]
[    5.492788] pci_bus 0000:03: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref]
[    5.492789] pci_bus 0000:04: resource 1 [mem 0xede00000-0xedefffff]
[    5.492791] pci_bus 0000:06: resource 0 [io  0x2000-0x3fff]
[    5.492792] pci_bus 0000:06: resource 1 [mem 0xd4000000-0xea0fffff]
[    5.492793] pci_bus 0000:06: resource 2 [mem 0x90000000-0xb1ffffff 64bit pref]
[    5.492794] pci_bus 0000:07: resource 0 [io  0x2000-0x3fff]
[    5.492795] pci_bus 0000:07: resource 1 [mem 0xd4000000-0xea0fffff]
[    5.492796] pci_bus 0000:07: resource 2 [mem 0x90000000-0xb1ffffff 64bit pref]
[    5.492797] pci_bus 0000:08: resource 1 [mem 0xea000000-0xea0fffff]
[    5.492799] pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
[    5.492800] pci_bus 0000:09: resource 1 [mem 0xd4000000-0xe9efffff]
[    5.492801] pci_bus 0000:09: resource 2 [mem 0x90000000-0xb1ffffff 64bit pref]
[    5.492802] pci_bus 0000:3e: resource 0 [io  0x3000-0x3fff]
[    5.492803] pci_bus 0000:3e: resource 1 [mem 0xe9f00000-0xe9ffffff]
[    5.492967] NET: Registered protocol family 2
[    5.493069] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    5.493115] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    5.493250] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    5.493347] TCP: Hash tables configured (established 131072 bind 65536)
[    5.493375] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    5.493408] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    5.493463] NET: Registered protocol family 1
[    5.493473] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    5.493968] pci 0000:06:00.0: enabling device (0006 -> 0007)
[    5.494020] pci 0000:07:02.0: enabling device (0006 -> 0007)
[    5.494187] PCI: CLS 128 bytes, default 64
[    5.494214] Unpacking initramfs...
[    5.594211] Initramfs unpacking failed: junk in compressed archive
[    5.595022] Freeing initrd memory: 9160K
[    5.595053] DMAR: ACPI device "device:6e" under DMAR at fed91000 as 00:15.0
[    5.595056] DMAR: ACPI device "device:6f" under DMAR at fed91000 as 00:15.1
[    5.595070] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    5.595072] software IO TLB [mem 0x712a2000-0x752a2000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    5.595092] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879c5f06f2, max_idle_ns: 440795220049 ns
[    5.595111] clocksource: Switched to clocksource tsc
[    5.595224] Scanning for low memory corruption every 60 seconds
[    5.595679] Initialise system trusted keyrings
[    5.595688] Key type blacklist registered
[    5.595726] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    5.596609] zbud: loaded
[    5.597718] Key type asymmetric registered
[    5.597719] Asymmetric key parser 'x509' registered
[    5.597739] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    5.597766] io scheduler noop registered
[    5.597767] io scheduler deadline registered
[    5.597797] io scheduler cfq registered (default)
[    5.597798] io scheduler mq-deadline registered
[    5.597799] io scheduler kyber registered
[    5.597803] io scheduler bfq registered
[    5.599408] pcieport 0000:07:01.0: enabling device (0006 -> 0007)
[    5.599800] pcieport 0000:00:1c.0: AER enabled with IRQ 122
[    5.599822] pcieport 0000:00:1c.1: AER enabled with IRQ 123
[    5.599844] pcieport 0000:00:1d.0: AER enabled with IRQ 124
[    5.599879] pcieport 0000:00:1d.6: AER enabled with IRQ 125
[    5.599934] efifb: probing for efifb
[    5.599945] efifb: framebuffer at 0x80000000, using 8100k, total 8100k
[    5.599946] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    5.599946] efifb: scrolling: redraw
[    5.599948] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    5.603267] Console: switching to colour frame buffer device 240x67
[    5.606521] fb0: EFI VGA frame buffer device
[    5.606528] intel_idle: MWAIT substates: 0x11142120
[    5.606529] intel_idle: v0.4.1 model 0x9E
[    5.606806] intel_idle: lapic_timer_reliable_states 0xffffffff
[    5.606879] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    5.606893] ACPI: Lid Switch [LID0]
[    5.606920] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    5.606930] ACPI: Power Button [PBTN]
[    5.606953] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    5.606958] ACPI: Sleep Button [SBTN]
[    5.606983] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    5.606992] ACPI: Power Button [PWRF]
[    5.609181] thermal LNXTHERM:00: registered as thermal_zone0
[    5.609182] ACPI: Thermal Zone [THM] (25 C)
[    5.609377] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    5.610896] nvme nvme0: pci function 0000:04:00.0
[    5.610945] intel_pstate: Intel P-state driver initializing
[    5.610961] intel_pstate: Disabling energy efficiency optimization
[    5.611274] intel_pstate: HWP enabled
[    5.611526] ledtrig-cpu: registered to indicate activity on CPUs
[    5.611542] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:07 [mem 0xfdb00000-0xfdffffff]
[    5.611545] caller pmc_core_probe+0x88/0x215 mapping multiple BARs
[    5.611550] intel_pmc_core:  initialized
[    5.611697] NET: Registered protocol family 10
[    5.615016] Segment Routing with IPv6
[    5.615029] NET: Registered protocol family 17
[    5.615538] RAS: Correctable Errors collector initialized.
[    5.615558] microcode: sig=0x906e9, pf=0x20, revision=0x84
[    5.615823] microcode: Microcode Update Driver: v2.2.
[    5.615829] sched_clock: Marking stable (5615820403, 0)->(5720063633, -104243230)
[    5.616120] registered taskstats version 1
[    5.616124] Loading compiled-in X.509 certificates
[    5.616135] zswap: loaded using pool lzo/zbud
[    5.617965] Key type big_key registered
[    5.619533]   Magic number: 6:372:980
[    5.619595] hctosys: unable to open rtc device (rtc0)
[    5.620403] Freeing unused kernel memory: 1456K
[    5.620404] Write protecting the kernel read-only data: 16384k
[    5.620661] Freeing unused kernel memory: 2016K
[    5.621500] Freeing unused kernel memory: 688K
[    5.695435] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    5.696066] i8042: Warning: Keylock active
[    5.698482] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.698510] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.700495] rtsx_pci 0000:03:00.0: enabling device (0000 -> 0002)
[    5.702859] ACPI: bus type USB registered
[    5.702877] usbcore: registered new interface driver usbfs
[    5.702884] usbcore: registered new interface driver hub
[    5.702905] usbcore: registered new device driver usb
[    5.704818] SCSI subsystem initialized
[    5.707810] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    5.707814] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    5.708266] libata version 3.00 loaded.
[    5.708940] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    5.708946] xhci_hcd 0000:00:14.0: cache line size of 128 is not supported
[    5.709126] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.709128] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.709130] usb usb1: Product: xHCI Host Controller
[    5.709132] usb usb1: Manufacturer: Linux 4.16.13-2-ARCH xhci-hcd
[    5.709133] usb usb1: SerialNumber: 0000:00:14.0
[    5.709217] hub 1-0:1.0: USB hub found
[    5.709252] hub 1-0:1.0: 16 ports detected
[    5.709609] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    5.709611] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    5.709613] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    5.709654] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    5.709656] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.709657] usb usb2: Product: xHCI Host Controller
[    5.709658] usb usb2: Manufacturer: Linux 4.16.13-2-ARCH xhci-hcd
[    5.709659] usb usb2: SerialNumber: 0000:00:14.0
[    5.709745] hub 2-0:1.0: USB hub found
[    5.709764] hub 2-0:1.0: 8 ports detected
[    5.710197] ahci 0000:00:17.0: version 3.0
[    5.710375] xhci_hcd 0000:3e:00.0: xHCI Host Controller
[    5.710380] xhci_hcd 0000:3e:00.0: new USB bus registered, assigned bus number 3
[    5.710482] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
[    5.710504] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
[    5.710506] ahci 0000:00:17.0: flags: 64bit ncq sntf stag pm led clo only pio slum part ems deso sadm sds apst 
[    5.710723] scsi host0: ahci
[    5.710809] scsi host1: ahci
[    5.710845] ata1: DUMMY
[    5.710848] ata2: SATA max UDMA/133 abar m2048@0xed133000 port 0xed133180 irq 133
[    5.711572] xhci_hcd 0000:3e:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x00009810
[    5.711783] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    5.711784] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.711785] usb usb3: Product: xHCI Host Controller
[    5.711786] usb usb3: Manufacturer: Linux 4.16.13-2-ARCH xhci-hcd
[    5.711787] usb usb3: SerialNumber: 0000:3e:00.0
[    5.711849] hub 3-0:1.0: USB hub found
[    5.711856] hub 3-0:1.0: 2 ports detected
[    5.711945] xhci_hcd 0000:3e:00.0: xHCI Host Controller
[    5.711947] xhci_hcd 0000:3e:00.0: new USB bus registered, assigned bus number 4
[    5.711949] xhci_hcd 0000:3e:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    5.711977] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    5.711978] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.711978] usb usb4: Product: xHCI Host Controller
[    5.711979] usb usb4: Manufacturer: Linux 4.16.13-2-ARCH xhci-hcd
[    5.711980] usb usb4: SerialNumber: 0000:3e:00.0
[    5.712037] hub 4-0:1.0: USB hub found
[    5.712044] hub 4-0:1.0: 2 ports detected
[    5.712899] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    5.844786]  nvme0n1: p1 p2 p3 p4
[    6.024476] ata2: SATA link down (SStatus 4 SControl 300)
[    6.036768] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[    6.040084] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    6.116031] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
[    6.128449] random: fast init done
[    6.184841] usb 1-2: New USB device found, idVendor=04d9, idProduct=a067
[    6.184847] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.184851] usb 1-2: Product: USB Gaming Mouse
[    6.184854] usb 1-2: Manufacturer: Holtek
[    6.184880] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610
[    6.184886] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.184890] usb 3-1: Product: USB2.0 Hub
[    6.184893] usb 3-1: Manufacturer: GenesysLogic
[    6.186230] hub 3-1:1.0: USB hub found
[    6.186719] hub 3-1:1.0: 4 ports detected
[    6.211264] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    6.227259] systemd[1]: Detected architecture x86-64.
[    6.235458] systemd[1]: Set hostname to <XPS>.
[    6.303536] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[    6.304203] random: systemd: uninitialized urandom read (16 bytes read)
[    6.304262] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.304364] random: systemd: uninitialized urandom read (16 bytes read)
[    6.305288] systemd[1]: Created slice system-getty.slice.
[    6.305351] random: systemd: uninitialized urandom read (16 bytes read)
[    6.305387] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.305481] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    6.305544] systemd[1]: Reached target Remote File Systems.
[    6.305632] systemd[1]: Listening on LVM2 poll daemon socket.
[    6.305853] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.306677] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[    6.323670] EXT4-fs (nvme0n1p2): re-mounted. Opts: data=ordered
[    6.325982] usb 4-1: New USB device found, idVendor=05e3, idProduct=0612
[    6.325983] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.325985] usb 4-1: Product: USB3.0 Hub
[    6.325986] usb 4-1: Manufacturer: GenesysLogic
[    6.326942] hub 4-1:1.0: USB hub found
[    6.327215] hub 4-1:1.0: 4 ports detected
[    6.369147] systemd-journald[245]: Received request to flush runtime journal from PID 1
[    6.385033] ACPI Warning: \_SB.IETM._TRT: Return Package has no elements (empty) (20180105/nsprepkg-130)
[    6.385976] ACPI: AC Adapter [AC] (on-line)
[    6.394092] wmi_bus wmi_bus-PNP0C14:03: WQBC data block query control method not found
[    6.394706] input: Intel HID events as /devices/platform/INT33D5:00/input/input6
[    6.395028] rtc_cmos 00:02: RTC can wake from S4
[    6.395447] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    6.395541] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    6.447704] usb 1-4: New USB device found, idVendor=0cf3, idProduct=e300
[    6.447706] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.504183] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.506750] hidraw: raw HID events driver (C) Jiri Kosina
[    6.508315] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    6.510867] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    6.511844] Linux agpgart interface v0.103
[    6.530198] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 4)
[    6.530486] ACPI: Battery Slot [BAT0] (battery present)
[    6.540544] Adding 16777212k swap on /dev/nvme0n1p3.  Priority:-2 extents:1 across:16777212k SSFS
[    6.541585] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    6.541808] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    6.546181] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    6.546182] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    6.546182] RAPL PMU: hw unit of domain package 2^-14 Joules
[    6.546183] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    6.546184] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    6.546184] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    6.551632] i2c_hid i2c-DLL07BE:01: i2c-DLL07BE:01 supply vdd not found, using dummy regulator
[    6.567354] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    6.570034] usb 1-12: new high-speed USB device number 4 using xhci_hcd
[    6.572783] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    6.573158] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    6.573159] cfg80211: failed to load regulatory.db
[    6.573201] cryptd: max_cpu_qlen set to 1000
[    6.578802] AVX2 version of gcm_enc/dec engaged.
[    6.578804] AES CTR mode by8 optimization enabled
[    6.582979] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    6.845951] usb 1-12: New USB device found, idVendor=0c45, idProduct=6713
[    6.845953] usb 1-12: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    6.845954] usb 1-12: Product: Integrated_Webcam_HD
[    6.845955] usb 1-12: Manufacturer: CN045G28LOG00788B0KMA01
[    6.972662] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    6.975525] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    6.975565] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    6.978097] usbcore: registered new interface driver usbhid
[    6.978098] usbhid: USB HID core driver
[    6.981346] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    6.985722] EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: data=ordered
[    6.985762] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    6.992956] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[    6.994175] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    6.996945] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    6.998257] checking generic (80000000 7e9000) vs hw (80000000 10000000)
[    6.998258] fb: switching to inteldrmfb from EFI VGA
[    6.998274] Console: switching to colour dummy device 80x25
[    6.998339] [drm] Replacing VGA console driver
[    6.999922] intel_rapl: Found RAPL domain package
[    6.999923] intel_rapl: Found RAPL domain core
[    6.999924] intel_rapl: Found RAPL domain uncore
[    6.999925] intel_rapl: Found RAPL domain dram
[    7.000560] input: Dell WMI hotkeys as /devices/platform/PNP0C14:03/wmi_bus/wmi_bus-PNP0C14:03/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input9
[    7.002979] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    7.002980] [drm] Driver supports precise vblank timestamp query.
[    7.003768] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    7.004755] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    7.019507] random: crng init done
[    7.019508] random: 7 urandom warning(s) missed due to ratelimiting
[    7.031763] input: DLL07BE:01 06CB:7A13 as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL07BE:01/0018:06CB:7A13.0001/input/input10
[    7.031825] hid-generic 0018:06CB:7A13.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL07BE:01 06CB:7A13] on i2c-DLL07BE:01
[    7.032532] input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:04D9:A067.0002/input/input11
[    7.033406] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
[    7.035146] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    7.035919] iTCO_vendor_support: vendor-support=0
[    7.036013] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[    7.037201] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    7.037355] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    7.037615] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.040205] media: Linux media interface: v0.10
[    7.054261] Linux video capture interface: v2.00
[    7.065908] Bluetooth: Core ver 2.22
[    7.065920] NET: Registered protocol family 31
[    7.065921] Bluetooth: HCI device and connection manager initialized
[    7.065923] Bluetooth: HCI socket layer initialized
[    7.065925] Bluetooth: L2CAP socket layer initialized
[    7.065928] Bluetooth: SCO socket layer initialized
[    7.071542] usbcore: registered new interface driver btusb
[    7.073299] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[    7.073301] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[    7.074678] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6713)
[    7.087093] holtek_mouse 0003:04D9:A067.0002: input,hidraw1: USB HID v1.10 Keyboard [Holtek USB Gaming Mouse] on usb-0000:00:14.0-2/input0
[    7.087111] holtek_mouse 0003:04D9:A067.0003: Fixing up report descriptor
[    7.087732] input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:04D9:A067.0003/input/input13
[    7.101001] uvcvideo 1-12:1.0: Entity type for entity Extension 4 was not initialized!
[    7.101003] uvcvideo 1-12:1.0: Entity type for entity Extension 3 was not initialized!
[    7.101004] uvcvideo 1-12:1.0: Entity type for entity Processing 2 was not initialized!
[    7.101005] uvcvideo 1-12:1.0: Entity type for entity Camera 1 was not initialized!
[    7.101159] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input14
[    7.101696] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[    7.130413] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    7.130459] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input15
[    7.138502] input: DLL07BE:01 06CB:7A13 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL07BE:01/0018:06CB:7A13.0001/input/input17
[    7.187084] usbcore: registered new interface driver uvcvideo
[    7.187086] USB Video Class driver (1.1.1)
[    7.187103] holtek_mouse 0003:04D9:A067.0003: input,hiddev0,hidraw0: USB HID v1.10 Mouse [Holtek USB Gaming Mouse] on usb-0000:00:14.0-2/input1
[    7.187291] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    7.187294] hid-multitouch 0018:06CB:7A13.0001: input,hidraw2: I2C HID v1.00 Mouse [DLL07BE:01 06CB:7A13] on i2c-DLL07BE:01
[    7.187297] holtek_mouse 0003:04D9:A067.0004: hiddev1,hidraw3: USB HID v1.10 Device [Holtek USB Gaming Mouse] on usb-0000:00:14.0-2/input2
[    7.196441] fbcon: inteldrmfb (fb0) is primary device
[    7.197681] mousedev: PS/2 mouse device common for all mice
[    7.220297] usb 4-1.4: new SuperSpeed USB device number 3 using xhci_hcd
[    7.237390] usb 4-1.4: New USB device found, idVendor=0bda, idProduct=8153
[    7.237399] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    7.237403] usb 4-1.4: Product: USB 10/100/1000 LAN
[    7.237407] usb 4-1.4: Manufacturer: Realtek
[    7.237411] usb 4-1.4: SerialNumber: 000001
[    7.245849] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3266: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    7.245854] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.245858] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    7.245861] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    7.245863] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    7.245867] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x18
[    7.245871] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1a
[    7.245874] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    7.251942] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2
[    7.251966] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2
[    7.254275] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[    7.254281] ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 0
[    7.255799] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4.1-00079-QCARMSWPZ-1 api 6 features wowlan,ignore-otp crc32 fd869beb
[    7.267339] usbcore: registered new interface driver r8152
[    7.286047] usbcore: registered new interface driver cdc_ether
[    7.321987] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 20d869c3
[    7.322295] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    7.322517] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[    7.323273] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[    7.323985] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[    7.324318] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[    7.325965] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[    7.340552] usb 4-1.4: reset SuperSpeed USB device number 3 using xhci_hcd
[    7.390703] r8152 4-1.4:1.0 eth0: v1.09.9
[    7.393292] r8152 4-1.4:1.0 enp62s0u1u4: renamed from eth0
[    7.910139] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[    7.913162] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[    7.914265] ath10k_pci 0000:02:00.0: htt-ver 3.47 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[    7.990304] ath: EEPROM regdomain: 0x6c
[    7.990305] ath: EEPROM indicates we should expect a direct regpair map
[    7.990306] ath: Country alpha2 being used: 00
[    7.990307] ath: Regpair used: 0x6c
[    7.994855] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[    8.301814] Console: switching to colour frame buffer device 240x67
[    8.328352] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    8.424358] IPv6: ADDRCONF(NETDEV_UP): enp62s0u1u4: link is not ready
[    8.428533] IPv6: ADDRCONF(NETDEV_UP): enp62s0u1u4: link is not ready
[    8.429267] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    9.149598] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[    9.152522] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[    9.208474] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   10.009875] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[   10.012590] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[   10.067899] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   10.174080] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   10.976955] IPv6: ADDRCONF(NETDEV_CHANGE): enp62s0u1u4: link becomes ready
[   10.977199] r8152 4-1.4:1.0 enp62s0u1u4: carrier on
[  356.058022] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  566.753454] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[  566.896240] usb 1-1: New USB device found, idVendor=090c, idProduct=1000
[  566.896246] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  566.896250] usb 1-1: Product: USB  Flash Driver
[  566.896254] usb 1-1: Manufacturer: USB 2.0
[  566.896257] usb 1-1: SerialNumber: AA08200000012496
[  566.918436] usb-storage 1-1:1.0: USB Mass Storage device detected
[  566.918534] scsi host2: usb-storage 1-1:1.0
[  566.918578] usbcore: registered new interface driver usb-storage
[  566.920441] usbcore: registered new interface driver uas
[  568.110626] scsi 2:0:0:0: Direct-Access     USB 2.0  USB Flash Driver 1100 PQ: 0 ANSI: 4
[  568.124598] sd 2:0:0:0: [sda] 15702016 512-byte logical blocks: (8.04 GB/7.49 GiB)
[  568.125009] sd 2:0:0:0: [sda] Write Protect is off
[  568.125011] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
[  568.125421] sd 2:0:0:0: [sda] No Caching mode page found
[  568.126200] sd 2:0:0:0: [sda] Assuming drive cache: write through
[  568.129351]  sda: sda1
[  568.130717] sd 2:0:0:0: [sda] Attached SCSI removable disk
[  589.316011] fuse init (API version 7.26)
[  619.941248] usb 1-1: USB disconnect, device number 5
[  671.068571] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  751.633474] usb 1-1: new high-speed USB device number 6 using xhci_hcd
[  751.776075] usb 1-1: New USB device found, idVendor=090c, idProduct=1000
[  751.776082] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  751.776086] usb 1-1: Product: USB  Flash Driver
[  751.776090] usb 1-1: Manufacturer: USB 2.0
[  751.776094] usb 1-1: SerialNumber: AA08200000012496
[  751.778974] usb-storage 1-1:1.0: USB Mass Storage device detected
[  751.779503] scsi host3: usb-storage 1-1:1.0
[  752.966759] scsi 3:0:0:0: Direct-Access     USB 2.0  USB Flash Driver 1100 PQ: 0 ANSI: 4
[  752.967695] sd 3:0:0:0: [sdb] 15702016 512-byte logical blocks: (8.04 GB/7.49 GiB)
[  752.968150] sd 3:0:0:0: [sdb] Write Protect is off
[  752.968157] sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00
[  752.968608] sd 3:0:0:0: [sdb] No Caching mode page found
[  752.973624] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[  752.977543]  sdb: sdb1
[  752.979008] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[  775.390698] usb 1-1: USB disconnect, device number 6
[  776.810146] usb 1-1: new high-speed USB device number 7 using xhci_hcd
[  776.952864] usb 1-1: New USB device found, idVendor=090c, idProduct=1000
[  776.952870] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  776.952874] usb 1-1: Product: USB  Flash Driver
[  776.952877] usb 1-1: Manufacturer: USB 2.0
[  776.952880] usb 1-1: SerialNumber: AA08200000012496
[  776.953859] usb-storage 1-1:1.0: USB Mass Storage device detected
[  776.954304] scsi host3: usb-storage 1-1:1.0
[  778.140054] scsi 3:0:0:0: Direct-Access     USB 2.0  USB Flash Driver 1100 PQ: 0 ANSI: 4
[  778.141276] sd 3:0:0:0: [sdb] 15702016 512-byte logical blocks: (8.04 GB/7.49 GiB)
[  778.141886] sd 3:0:0:0: [sdb] Write Protect is off
[  778.141894] sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00
[  778.142470] sd 3:0:0:0: [sdb] No Caching mode page found
[  778.146823] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[  778.150777]  sdb: sdb1
[  778.152215] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[  830.342152] usb 1-1: USB disconnect, device number 7
[  833.616792] usb 1-1: new high-speed USB device number 8 using xhci_hcd
[  833.759547] usb 1-1: New USB device found, idVendor=090c, idProduct=1000
[  833.759554] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  833.759559] usb 1-1: Product: USB  Flash Driver
[  833.759563] usb 1-1: Manufacturer: USB 2.0
[  833.759567] usb 1-1: SerialNumber: AA08200000012496
[  833.760597] usb-storage 1-1:1.0: USB Mass Storage device detected
[  833.760995] scsi host3: usb-storage 1-1:1.0
[  834.940014] scsi 3:0:0:0: Direct-Access     USB 2.0  USB Flash Driver 1100 PQ: 0 ANSI: 4
[  834.941019] sd 3:0:0:0: [sdb] 15702016 512-byte logical blocks: (8.04 GB/7.49 GiB)
[  834.941478] sd 3:0:0:0: [sdb] Write Protect is off
[  834.941482] sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00
[  834.941935] sd 3:0:0:0: [sdb] No Caching mode page found
[  834.944821] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[  834.949793]  sdb: sdb1
[  834.951706] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[  929.178032] Buffer I/O error on dev sda1, logical block 528, async page read
[  929.184720] Buffer I/O error on dev sda1, logical block 536, async page read
[  929.187407] Buffer I/O error on dev sda1, logical block 536, async page read
[  929.189804] Buffer I/O error on dev sda1, logical block 536, async page read
[  929.195373] Buffer I/O error on dev sda1, logical block 528, async page read
[  929.201026] Buffer I/O error on dev sda1, logical block 528, async page read
[  929.206393] Buffer I/O error on dev sda1, logical block 528, async page read
[  929.212317] Buffer I/O error on dev sda1, logical block 624, async page read
[  929.215246] Buffer I/O error on dev sda1, logical block 624, async page read
[  929.217669] Buffer I/O error on dev sda1, logical block 624, async page read
[  986.068978] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
 
axiome wrote:

For the moment i just did a temporary fix by downgrading all the packages to a previous snapshot from the archive.

I stopped reading the downgrade section of the wiki before the kernel section, I did not know this existed. Thank you for pointing it out to me.

Thank you again for your time.

Offline

#5 2018-06-13 11:29:24

seth
Member
Registered: 2012-09-03
Posts: 8,449

Re: [Solved] No input after login into Xorg.

Something in your i3 config, try to move ~/.config/i3/ away.
Also do not fork things like setxkbmap, this can have unexpected consequences because of the disordered invocation (and updating the kbd map tends to be slow)

Edit: "k", "consequences"

Last edited by seth (2018-06-13 11:30:19)

Offline

#6 2018-06-13 11:39:42

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 20,122
Website

Re: [Solved] No input after login into Xorg.

halpls wrote:

If I rename my .xinitrc file Xorg really does not boot and kicks me out to the login screen.

That's to be expected.  I didn't suggest just renaming your .xinitrc.  I suggested just starting something simple like a terminal with it so we could take i3 out of the equation.  I believe this would be even more effective than the above-suggested moving of i3's configs - and it would certainly be easier.

Given the symptoms, I doubt this problem actually has anything to do with your WM or it's configs, but given that this is the easiest thing to test/rule-out I'd like to really rule it out before looking into graphics drivers (which is where my suspicion is leaning).

So just temporarily add a single line to the top of your ~/.xinitrc that exec's your favorite terminal, e.g.

exec xterm

if you have xterm installed.  The use startx or xinit from the tty and see if you get a functional terminal window.

Last edited by Trilby (2018-06-13 11:40:24)


"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#7 2018-06-13 11:56:19

halpls
Member
Registered: 2018-06-12
Posts: 8

Re: [Solved] No input after login into Xorg.

seth wrote:

Something in your i3 config, try to move ~/.config/i3/ away.

The i3 first configuration window appears, and there does not seem to be any graphical error. However, there is no input from mouse/keyboard. Cannot even ctrl+alt+F2.

seth wrote:

do not fork things like setxkbmap

Thank you for your input, I will look to address this after this problem.

Trilby wrote:

So just temporarily add a single line to the top of your ~/.xinitrc that exec's your favorite terminal, e.g.

Sorry about the missundertanding. After adding "exec urxvt" and login in, the terminal window appears in a corner of the screen. The terminal window that appears is not configured. urxvt (should) gets its configuration from Xresources, I do not know if this is expected or not. Again, I cannot type anything, nor ctrl+alt+f2, nor use the mouse.

Thank you again.

Offline

#8 2018-06-13 14:04:35

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 20,122
Website

Re: [Solved] No input after login into Xorg.

halpls wrote:

Sorry about the missundertanding. After adding "exec urxvt" and login in, the terminal window appears in a corner of the screen. The terminal window that appears is not configured. urxvt (should) gets its configuration from Xresources, I do not know if this is expected or not.

In this case, no, it's not expected to have any settings from Xresources.  So the keyboard not working is a Xorg level problem, but are there graphical glitches or issues with just the terminal there?


"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#9 2018-06-13 16:01:01

halpls
Member
Registered: 2018-06-12
Posts: 8

Re: [Solved] No input after login into Xorg.

The screen is completely black, except for the white terminal that is loaded in the top-left corner of the screen. The font seems to be default size and it is readable. I do not know if this is the expected behaviour, or if the terminal should take the whole screen.

Offline

#10 2018-06-13 16:03:11

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 20,122
Website

Re: [Solved] No input after login into Xorg.

No that is expected.  So it sounds like any graphical issues you had with i3 might be particular to i3 ... yet there is some other problem with the keyboard.  Odd.


"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#11 2018-06-13 18:41:23

seth
Member
Registered: 2012-09-03
Posts: 8,449

Re: [Solved] No input after login into Xorg.

As for i3: some xrandr call in your i3wm config. Probably several of them, all forked :-P

There's suspiciously no "catch all" rule, no mentioning of evdev or libinput in your xorg log - so no keyboard nor any mouse is handled.

pacman -Qs xf86

Offline

#12 2018-06-13 18:53:52

halpls
Member
Registered: 2018-06-12
Posts: 8

Re: [Solved] No input after login into Xorg.

I do not have any xrandr calls, nor have it installed. I plan to be using it when configuring additional monitors to the laptop.



As for the pacman command:

libxxf86vm
xf86-input-libinput
xorgproto

I have not installed the xf86-video-intel package as recommended by my laptop wikipage.

Offline

#13 2018-06-13 19:57:32

seth
Member
Registered: 2012-09-03
Posts: 8,449

Re: [Solved] No input after login into Xorg.

pacman -Qkk xf86-input-libinput
ls -l /usr/share/X11/xorg.conf.d

Offline

#14 2018-06-13 23:20:05

halpls
Member
Registered: 2018-06-12
Posts: 8

Re: [Solved] No input after login into Xorg.

pacman command:

warning: xf86-input-libinput: /usr/share/X11/xorg.conf.d/40-libinput.conf (No such file or directory)         [This line was added by me. It was an output in the terminal when the command was run, but did not appear when I ">" the command.]
xf86-input-libinput: 21 total files, 1 altered file

ls command:

total 4
-rw-r--r-- 1 root root 1350 Jun 10 11:45 10-quirks.conf

Thank you guys for your time.

Offline

#15 2018-06-14 04:31:20

seth
Member
Registered: 2012-09-03
Posts: 8,449

Re: [Solved] No input after login into Xorg.

Well, there's your input problem.
What happened to the file and why?
Place it back. In doubt, re-install xf86-input-libinput.

Fyi:

foo > bar 2>&1

(2>&1 redirects stderr into stdout)

Offline

#16 2018-06-14 07:42:29

halpls
Member
Registered: 2018-06-12
Posts: 8

Re: [Solved] No input after login into Xorg.

Okey, that was it!

seth wrote:

What happened to the file and why?

halpls wrote:

What I have tried so far to address the module errors:
  *Using the prior Xorg config.
  *Using the xorg.config template from xorg -configure
*Deleting xorg.config and xorg.config.d
  *Reinstalling xorg-server xorg-xinit and bumblebee

I guess I must have deleted it instead of the /etc version by accident.

After adding the file and reinstalling the package, I could log into Xorg if my xinitrc only started a terminal, as sugested by Trilby. There must have been a problem aswell with my i3 config, I have reset it and everything is working as expected.

I have set the keyboard layout and options within the xorg configuration files, thank you again for recommending not using setxkbmap in xinitrc for this.

I will tag the post as solved. Should I edit the tittle too to reflect more accurately the issue?

Thank you once more both of you for your help and time.

Offline

#17 2018-06-14 08:13:19

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 5,450

Re: [Solved] No input after login into Xorg.

halpls wrote:

I will tag the post as solved. Should I edit the tittle too to reflect more accurately the issue?

Please do, indicate that it is solved in the title as well.

Offline

#18 2018-06-14 08:36:52

halpls
Member
Registered: 2018-06-12
Posts: 8

Re: [Solved] No input after login into Xorg.

Done. I have now realized that there was not visual glitch, just the input issue.

halpls wrote:

There appear to be some programs started (Gimp, numberlines from vim, my clipboard manager), but it is all stripped in weird lines. This surpraises me because none of this programs are configured to start automatically. The mouse is static in the middle and the keyboard does not work (appart from the keyboard-light). Color and resolution seem to be fine.

This was my clipboard manager oppened fullscreen  lol.

Offline

Board footer

Powered by FluxBB