You are not logged in.

#1 2018-07-04 01:31:27

hmors
Member
Registered: 2018-07-04
Posts: 13

[Solved] cinnamon does not start (Segmentation fault (core dumped))

Hi, I am really new configuring the desktop environment. Right now I am using gnome as a default desktop environment and GDM as a login manager.
The problem is that I installed cinnamon desktop but I can not use it, when I put in the terminal

"cinnamon --replace"

I get :

(cinnamon:4575): Gdk-CRITICAL **: 20:18:43.214: gdk_x11_display_set_window_scale: assertion 'GDK_IS_X11_DISPLAY (display)' failed

Also when I choose cinnamon in the gdm display, it seems to enter to the desktop manager but then returns to the gdm display again.
This happens also when I try to use another desktop environment different of gnome 3 e.g. cinnamon, mate.
I have a nvidia gforce MX150 as a dedicated card with  nvidia-390xx driver and Bumblebee.  Until now I have tried a lot things but I have not
been able to fix the problem. Any guess?. Thanks in advance.

Last edited by hmors (2018-07-09 22:34:20)

Offline

#2 2018-07-04 01:34:00

Scimmia
Bug Wrangler
Registered: 2012-09-01
Posts: 7,055

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

cinnamon --replace isn't going to do what you want. Check the logs, see why it's failing when started from GDM.

Offline

#3 2018-07-05 13:47:25

hmors
Member
Registered: 2018-07-04
Posts: 13

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

Thanks for your reply. I checked the log files, but the /var/log/gdm directory is empty. And the Xorg.1.log says:

    255.801]    Module class: X.Org Video Driver
[   255.801] (II) NVIDIA dlloader X Driver  390.67  Fri Jun  1 02:45:19 PDT 2018
[   255.801] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   255.801] (EE) No devices detected.
[   255.801] (EE) 

do you know if this the log file that I have to check?

Offline

#4 2018-07-05 13:51:42

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 5,574

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

Post a complete xorg log, the normally correct and most up to date file should be xorg.0.log though if you are using GDM that might dump relevant info to journal, post

journalctl -b --unit=gdm

after a failed startup attempt.

Offline

#5 2018-07-05 14:47:09

hmors
Member
Registered: 2018-07-04
Posts: 13

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

Hi, this is the output for journalctl

 $ journalctl -b --unit=gdm 
-- Logs begin at Thu 2018-03-15 00:15:00 CST, end at Thu 2018-07-05 09:39:24 CDT. --
Jul 05 07:43:01 hect-arch systemd[1]: Starting GNOME Display Manager...
Jul 05 07:43:01 hect-arch systemd[1]: Started GNOME Display Manager.
Jul 05 07:46:08 hect-arch gdm-password][808]: pam_unix(gdm-password:session): session opened for user hector by (uid=0)
Jul 05 08:41:28 hect-arch gdm-password][6832]: pam_unix(gdm-password:session): session opened for user hector by hector(uid=0)
Jul 05 08:41:29 hect-arch gdm-password][6832]: pam_unix(gdm-password:session): session closed for user hector
Jul 05 08:41:29 hect-arch gdm[518]: GdmDisplay: display lasted 0.824144 seconds
Jul 05 08:41:32 hect-arch gdm-password][6855]: pam_unix(gdm-password:session): session opened for user hector by hector(uid=0)
Jul 05 08:41:33 hect-arch gdm-password][6855]: pam_unix(gdm-password:session): session closed for user hector
Jul 05 08:41:33 hect-arch gdm[518]: GdmDisplay: display lasted 0.029111 seconds
Jul 05 08:41:39 hect-arch gdm-password][6877]: pam_unix(gdm-password:session): session opened for user hector by hector(uid=0)
Jul 05 09:15:40 hect-arch gdm-password][11539]: pam_unix(gdm-password:session): session opened for user hector by hector(uid=0)
Jul 05 09:15:40 hect-arch gdm-password][11539]: pam_unix(gdm-password:session): session closed for user hector
Jul 05 09:15:40 hect-arch gdm[518]: GdmDisplay: display lasted 0.026266 seconds
Jul 05 09:15:44 hect-arch gdm-password][11562]: pam_unix(gdm-password:session): session opened for user hector by hector(uid=0)
Jul 05 09:15:44 hect-arch gdm-password][11562]: pam_unix(gdm-password:session): session closed for user hector
Jul 05 09:15:44 hect-arch gdm[518]: GdmDisplay: display lasted 0.028088 seconds
Jul 05 09:15:52 hect-arch gdm-password][11584]: pam_unix(gdm-password:session): session opened for user hector by hector(uid=0)

apparently, the session closes after 3 seconds when I try to initiate a session with cinnamon.

This is the complete Xorg.0.log file

 
[   217.780] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[   217.781] 
X.Org X Server 1.20.0
X Protocol Version 11, Revision 0
[   217.781] Build Operating System: Linux Arch Linux
[   217.781] Current Operating System: Linux hect-arch 4.16.13-2-ARCH #1 SMP PREEMPT Fri Jun 1 18:46:11 UTC 2018 x86_64
[   217.781] Kernel command line: initrd=\initramfs-linux.img root=PARTUUID=000a16c5-2230-b5fd-26de-f7478a2d1400 rootfstype=ext4 add_efi_memmap rw
[   217.781] Build Date: 10 June 2018  09:45:02AM
[   217.781]  
[   217.781] Current version of pixman: 0.34.0
[   217.781] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   217.781] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   217.782] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 12 10:42:49 2018
[   217.782] (==) Using config file: "/etc/X11/xorg.conf"
[   217.782] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   217.782] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   217.783] (==) ServerLayout "Layout0"
[   217.783] (**) |-->Screen "Screen0" (0)
[   217.783] (**) |   |-->Monitor "Monitor0"
[   217.783] (**) |   |-->Device "Device0"
[   217.783] (**) |-->Input Device "Keyboard0"
[   217.783] (**) |-->Input Device "Mouse0"
[   217.783] (==) Automatically adding devices
[   217.783] (==) Automatically enabling devices
[   217.783] (==) Automatically adding GPU devices
[   217.783] (==) Automatically binding GPU devices
[   217.783] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   217.783] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   217.783] 	Entry deleted from font path.
[   217.783] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[   217.783] 	Entry deleted from font path.
[   217.783] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[   217.783] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/100dpi
[   217.783] (==) ModulePath set to "/usr/lib/xorg/modules"
[   217.783] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   217.783] (WW) Disabling Keyboard0
[   217.783] (WW) Disabling Mouse0
[   217.783] (II) Module ABI versions:
[   217.783] 	X.Org ANSI C Emulation: 0.4
[   217.783] 	X.Org Video Driver: 24.0
[   217.783] 	X.Org XInput driver : 24.1
[   217.783] 	X.Org Server Extension : 10.0
[   217.784] (++) using VT number 2

[   217.787] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c507
[   217.788] (II) xfree86: Adding drm device (/dev/dri/card0)
[   217.789] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[   217.792] (--) PCI:*(0@0:2:0) 8086:591b:1462:1207 rev 4, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[   217.792] (--) PCI: (1@0:0:0) 10de:1d10:1462:1207 rev 161, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[   217.792] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   217.792] (II) LoadModule: "glx"
[   217.792] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   217.816] (II) Module glx: vendor="X.Org Foundation"
[   217.816] 	compiled for 1.20.0, module version = 1.0.0
[   217.816] 	ABI class: X.Org Server Extension, version 10.0
[   217.816] (II) LoadModule: "nvidia"
[   217.816] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   217.818] (II) Module nvidia: vendor="NVIDIA Corporation"
[   217.819] 	compiled for 4.0.2, module version = 1.0.0
[   217.819] 	Module class: X.Org Video Driver
[   217.819] ================ WARNING WARNING WARNING WARNING ================
[   217.819] This server has a video driver ABI version of 24.0 that this
driver does not officially support.  Please check
http://www.nvidia.com/ for driver updates or downgrade to an X
server with a supported driver ABI.
[   217.819] =================================================================
[   217.819] (EE) NVIDIA: Use the -ignoreABI option to override this check.
[   217.819] (II) UnloadModule: "nvidia"
[   217.819] (II) Unloading nvidia
[   217.819] (EE) Failed to load module "nvidia" (unknown error, 0)
[   217.819] (EE) No drivers available.
[   217.819] (EE) 
Fatal server error:
[   217.819] (EE) no screens found(EE) 
[   217.819] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   217.819] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   217.819] (EE) 
[   217.862] (EE) Server terminated with error (1). Closing log file.

Now I have to figure out what this warning means.

Offline

#6 2018-07-05 15:08:25

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 5,574

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

That's an old log. Do you have anything more recent in ~/.local/share/xorg? FWIW you might have to explicitly disable wayland in GDM, and can you post

systemctl status bumblebeed
journalctl -b #In case that the --unit command simply filtered too much.

Last edited by V1del (2018-07-05 15:21:04)

Offline

#7 2018-07-05 16:04:11

hmors
Member
Registered: 2018-07-04
Posts: 13

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

No, I don't have anything in ~/.local/share/X11. I only find a  log file in ~/.local/share/xorg, and it was created today


 $ ls -lrt
total 16
-rw-r--r-- 1 hector users 4846 Jul  5 09:15 Xorg.0.log.old
-rw-r--r-- 1 hector users 4846 Jul  5 09:15 Xorg.0.log

the content of this Xorg.0.log file is

[  5592.722] (--) Log file renamed from "/home/hector/.local/share/xorg/Xorg.pid-11580.log" to "/home/hector/.local/share/xorg/Xorg.0.log"
[  5592.723] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[  5592.723] 
X.Org X Server 1.20.0
X Protocol Version 11, Revision 0
[  5592.723] Build Operating System: Linux Arch Linux
[  5592.723] Current Operating System: Linux hect-arch 4.17.3-1-ARCH #1 SMP PREEMPT Tue Jun 26 04:42:36 UTC 2018 x86_64
[  5592.723] Kernel command line: initrd=\initramfs-linux.img root=PARTUUID=000a16c5-2230-b5fd-26de-f7478a2d1400 rootfstype=ext4 add_efi_memmap rw
[  5592.723] Build Date: 18 June 2018  03:12:37PM
[  5592.723]  
[  5592.723] Current version of pixman: 0.34.0
[  5592.723] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  5592.723] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  5592.723] (==) Log file: "/home/hector/.local/share/xorg/Xorg.0.log", Time: Thu Jul  5 09:15:44 2018
[  5592.723] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  5592.723] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  5592.723] (==) No Layout section.  Using the first Screen section.
[  5592.723] (==) No screen section available. Using defaults.
[  5592.723] (**) |-->Screen "Default Screen Section" (0)
[  5592.723] (**) |   |-->Monitor "<default monitor>"
[  5592.723] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[  5592.723] (**) |   |-->Device "Nvidia Card"
[  5592.723] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  5592.723] (==) Automatically adding devices
[  5592.723] (==) Automatically enabling devices
[  5592.723] (==) Automatically adding GPU devices
[  5592.723] (==) Automatically binding GPU devices
[  5592.723] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  5592.723] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[  5592.723] 	Entry deleted from font path.
[  5592.723] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[  5592.723] 	Entry deleted from font path.
[  5592.723] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[  5592.723] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/100dpi
[  5592.723] (==) ModulePath set to "/usr/lib/xorg/modules"
[  5592.723] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  5592.723] (II) Module ABI versions:
[  5592.723] 	X.Org ANSI C Emulation: 0.4
[  5592.723] 	X.Org Video Driver: 24.0
[  5592.723] 	X.Org XInput driver : 24.1
[  5592.723] 	X.Org Server Extension : 10.0
[  5592.724] (++) using VT number 2

[  5592.725] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c7
[  5592.725] (II) xfree86: Adding drm device (/dev/dri/card0)
[  5592.726] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[  5592.727] (--) PCI:*(0@0:2:0) 8086:591b:1462:1207 rev 4, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[  5592.727] (--) PCI: (1@0:0:0) 10de:1d10:1462:1207 rev 161, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[  5592.727] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  5592.727] (II) LoadModule: "glx"
[  5592.727] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  5592.728] (II) Module glx: vendor="X.Org Foundation"
[  5592.728] 	compiled for 1.20.0, module version = 1.0.0
[  5592.728] 	ABI class: X.Org Server Extension, version 10.0
[  5592.728] (II) LoadModule: "nvidia"
[  5592.728] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  5592.728] (II) Module nvidia: vendor="NVIDIA Corporation"
[  5592.728] 	compiled for 4.0.2, module version = 1.0.0
[  5592.728] 	Module class: X.Org Video Driver
[  5592.728] (II) NVIDIA dlloader X Driver  390.67  Fri Jun  1 02:45:19 PDT 2018
[  5592.728] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  5592.728] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[  5592.728] (EE) No devices detected.
[  5592.728] (EE) 
Fatal server error:
[  5592.728] (EE) no screens found(EE) 
[  5592.728] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[  5592.728] (EE) Please also check the log file at "/home/hector/.local/share/xorg/Xorg.0.log" for additional information.
[  5592.728] (EE) 
[  5592.736] (EE) Server terminated with error (1). Closing log file.

and here does not appear the warning message

Offline

#8 2018-07-05 16:07:59

loqs
Member
Registered: 2014-03-06
Posts: 6,196

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

Please post the output of the following

dmesg
pacman -Qs nvidia

Offline

#9 2018-07-05 16:13:17

hmors
Member
Registered: 2018-07-04
Posts: 13

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

Hi, here the outputs

dmesg

[    0.000000] Linux version 4.17.3-1-ARCH (builduser@heftig-6515) (gcc version 8.1.1 20180531 (GCC)) #1 SMP PREEMPT Tue Jun 26 04:42:36 UTC 2018
[    0.000000] Command line: initrd=\initramfs-linux.img root=PARTUUID=000a16c5-2230-b5fd-26de-f7478a2d1400 rootfstype=ext4 add_efi_memmap rw
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000732c5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000732c6000-0x00000000732c6fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000732c7000-0x00000000732c7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000732c8000-0x0000000079ceefff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079cef000-0x000000007a7a8fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007a7a9000-0x000000007a7ebfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007a7ec000-0x000000007afc5fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007afc6000-0x000000007b3fdfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007b3fe000-0x000000007b3fefff] usable
[    0.000000] BIOS-e820: [mem 0x000000007b3ff000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x700b7018-0x700e3257] usable ==> usable
[    0.000000] e820: update [mem 0x700b7018-0x700e3257] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000700b7017] usable
[    0.000000] reserve setup_data: [mem 0x00000000700b7018-0x00000000700e3257] usable
[    0.000000] reserve setup_data: [mem 0x00000000700e3258-0x00000000732c5fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000732c6000-0x00000000732c6fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000732c7000-0x00000000732c7fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000732c8000-0x0000000079ceefff] usable
[    0.000000] reserve setup_data: [mem 0x0000000079cef000-0x000000007a7a8fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000007a7a9000-0x000000007a7ebfff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000007a7ec000-0x000000007afc5fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000007afc6000-0x000000007b3fdfff] reserved
[    0.000000] reserve setup_data: [mem 0x000000007b3fe000-0x000000007b3fefff] usable
[    0.000000] reserve setup_data: [mem 0x000000007b3ff000-0x000000007fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000027effffff] usable
[    0.000000] efi: EFI v2.50 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0x7a7b6000  ACPI=0x7a7b6000  SMBIOS=0x7b2fe000  SMBIOS 3.0=0x7b2fd000  ESRT=0x78c01598  TPMEventLog=0x73382018 
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Micro-Star International Co., Ltd. PL62 7RC/MS-16JD, BIOS E16JDIMS.106 06/27/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x27f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000000]   1 base 007C000000 mask 7FFC000000 uncachable
[    0.000000]   2 base 007B800000 mask 7FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x7b3ff max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x0000000078c01598 to 0x0000000078c015d0.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x1ff660000, 0x1ff660fff] PGTABLE
[    0.000000] BRK [0x1ff661000, 0x1ff661fff] PGTABLE
[    0.000000] BRK [0x1ff662000, 0x1ff662fff] PGTABLE
[    0.000000] BRK [0x1ff663000, 0x1ff663fff] PGTABLE
[    0.000000] BRK [0x1ff664000, 0x1ff664fff] PGTABLE
[    0.000000] BRK [0x1ff665000, 0x1ff665fff] PGTABLE
[    0.000000] BRK [0x1ff666000, 0x1ff666fff] PGTABLE
[    0.000000] BRK [0x1ff667000, 0x1ff667fff] PGTABLE
[    0.000000] BRK [0x1ff668000, 0x1ff668fff] PGTABLE
[    0.000000] Secure boot disabled
[    0.000000] RAMDISK: [mem 0x700e4000-0x70842fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007A7B6000 000024 (v02 MSI_NB)
[    0.000000] ACPI: XSDT 0x000000007A7B60B8 0000F4 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007A7DE158 000114 (v06 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007A7B6240 027F12 (v02 MSI_NB MEGABOOK 01072009 INTL 20160422)
[    0.000000] ACPI: FACS 0x000000007AF95C40 000040
[    0.000000] ACPI: APIC 0x000000007A7DE270 0000BC (v03 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000007A7DE330 000044 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: ECDT 0x000000007A7DE378 0000C1 (v01 MSI_NB MEGABOOK 01072009 AMI. 00010013)
[    0.000000] ACPI: MCFG 0x000000007A7DE440 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x000000007A7DE480 000322 (v01 SataRe SataTabl 00001000 INTL 20160422)
[    0.000000] ACPI: FIDT 0x000000007A7DE7A8 00009C (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: MSDM 0x000000007A7DE848 000055 (v03 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: SLIC 0x000000007A7DE8A0 000176 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000007A7DEA18 003154 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000007A7E1B70 00282C (v02 PegSsd PegSsdt  00001000 INTL 20160422)
[    0.000000] ACPI: HPET 0x000000007A7E43A0 000038 (v01 INTEL  KBL      00000001 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000007A7E43D8 000DE5 (v02 INTEL  Ther_Rvp 00001000 INTL 20160422)
[    0.000000] ACPI: UEFI 0x000000007A7E51C0 000042 (v01 INTEL  EDK2     00000002      01000013)
[    0.000000] ACPI: SSDT 0x000000007A7E5208 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.000000] ACPI: LPIT 0x000000007A7E60E8 000094 (v01 INTEL  KBL      00000000 MSFT 0000005F)
[    0.000000] ACPI: WSMT 0x000000007A7E6180 000028 (v01 INTEL  KBL      00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000007A7E61A8 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000007A7E6448 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[    0.000000] ACPI: DBGP 0x000000007A7E9450 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x000000007A7E9488 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: BGRT 0x000000007A7E94E0 000038 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000007A7E9518 0000AE (v02 SgRef  SgPeg    00001000 INTL 20160422)
[    0.000000] ACPI: TPM2 0x000000007A7E95C8 000034 (v03 MSI_NB MEGABOOK 00000001 AMI  00000000)
[    0.000000] ACPI: SSDT 0x000000007A7E9600 001E85 (v01 OptRef OptTabl  00001000 INTL 20160422)
[    0.000000] ACPI: ASF! 0x000000007A7EB488 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000027effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x27effc000-0x27effffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000732c5fff]
[    0.000000]   node   0: [mem 0x00000000732c8000-0x0000000079ceefff]
[    0.000000]   node   0: [mem 0x000000007b3fe000-0x000000007b3fefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000027effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff]
[    0.000000] On node 0 totalpages: 2067594
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7732 pages used for memmap
[    0.000000]   DMA32 zone: 494830 pages, LIFO batch:31
[    0.000000]   Normal zone: 24512 pages used for memmap
[    0.000000]   Normal zone: 1568768 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 98 pages
[    0.000000] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x52 (or later)
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x700b7000-0x700b7fff]
[    0.000000] PM: Registered nosave memory: [mem 0x700e3000-0x700e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x732c6000-0x732c6fff]
[    0.000000] PM: Registered nosave memory: [mem 0x732c7000-0x732c7fff]
[    0.000000] PM: Registered nosave memory: [mem 0x79cef000-0x7a7a8fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a7a9000-0x7a7ebfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a7ec000-0x7afc5fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7afc6000-0x7b3fdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b3ff000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2035264
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: initrd=\initramfs-linux.img root=PARTUUID=000a16c5-2230-b5fd-26de-f7478a2d1400 rootfstype=ext4 add_efi_memmap rw
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7918464K/8270376K available (10252K kernel code, 1290K rwdata, 3488K rodata, 1476K init, 608K bss, 351912K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 32649 entries in 128 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: (none).
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180313
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.003333] APIC: Switch to symmetric I/O mode setup
[    0.003333] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.006666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.023333] tsc: Detected 2800.000 MHz processor
[    0.023333] tsc: Detected 2808.000 MHz TSC
[    0.023333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2879c5f06f2, max_idle_ns: 440795220049 ns
[    0.023333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5618.00 BogoMIPS (lpj=9360000)
[    0.023333] pid_max: default: 32768 minimum: 301
[    0.023333] Security Framework initialized
[    0.023333] Yama: becoming mindful.
[    0.023333] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.023333] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.023333] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.023333] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.023333] CPU: Physical Processor ID: 0
[    0.023333] CPU: Processor Core ID: 0
[    0.023333] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.023333] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.023333] mce: CPU supports 10 MCE banks
[    0.023333] CPU0: Thermal monitoring enabled (TM1)
[    0.023333] process: using mwait in idle threads
[    0.023333] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.023333] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.023333] Spectre V2 : Mitigation: Full generic retpoline
[    0.023333] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.023333] Speculative Store Bypass: Vulnerable
[    0.029469] Freeing SMP alternatives memory: 28K
[    0.036666] smpboot: CPU0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[    0.050017] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.050102] ... version:                4
[    0.050104] ... bit width:              48
[    0.050105] ... generic registers:      4
[    0.050108] ... value mask:             0000ffffffffffff
[    0.050124] ... max period:             00007fffffffffff
[    0.050124] ... fixed-purpose events:   3
[    0.050125] ... event mask:             000000070000000f
[    0.053349] Hierarchical SRCU implementation.
[    0.063625] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.066690] smp: Bringing up secondary CPUs ...
[    0.090027] x86: Booting SMP configuration:
[    0.090030] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.230444] smp: Brought up 1 node, 8 CPUs
[    0.230444] smpboot: Max logical packages: 1
[    0.230444] smpboot: Total of 8 processors activated (44945.00 BogoMIPS)
[    0.233610] devtmpfs: initialized
[    0.233610] x86/mm: Memory block size: 128MB
[    0.233904] PM: Registering ACPI NVS region [mem 0x732c6000-0x732c6fff] (4096 bytes)
[    0.233904] PM: Registering ACPI NVS region [mem 0x7a7ec000-0x7afc5fff] (8232960 bytes)
[    0.233904] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.233904] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.233904] pinctrl core: initialized pinctrl subsystem
[    0.233904] RTC time: 12:42:31, date: 07/05/18
[    0.233904] NET: Registered protocol family 16
[    0.233904] cpuidle: using governor ladder
[    0.233904] cpuidle: using governor menu
[    0.233904] KVM setup pv remote TLB flush
[    0.233904] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.233904] ACPI: bus type PCI registered
[    0.233904] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.233904] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.233904] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.233904] PCI: Using configuration type 1 for base access
[    0.234189] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.234189] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.236669] ACPI: Added _OSI(Module Device)
[    0.236669] ACPI: Added _OSI(Processor Device)
[    0.236669] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.236669] ACPI: Added _OSI(Processor Aggregator Device)
[    0.236669] ACPI: Added _OSI(Linux-Dell-Video)
[    0.236669] ACPI: EC: EC started
[    0.236669] ACPI: EC: interrupt blocked
[    0.236669] ACPI: \: Used as first EC
[    0.236669] ACPI: \: GPE=0x13, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.236669] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.279301] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.287450] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.292354] ACPI: Dynamic OEM Table Load:
[    0.292360] ACPI: SSDT 0xFFFFA0D5B4DC6800 000663 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.292936] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.294517] ACPI: Dynamic OEM Table Load:
[    0.294522] ACPI: SSDT 0xFFFFA0D5B4FF1800 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.295376] ACPI: Dynamic OEM Table Load:
[    0.295381] ACPI: SSDT 0xFFFFA0D5B4DC1000 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.296232] ACPI: Dynamic OEM Table Load:
[    0.296236] ACPI: SSDT 0xFFFFA0D5B4FD3E00 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.299827] ACPI: Interpreter enabled
[    0.299867] ACPI: (supports S0 S3 S4 S5)
[    0.299868] ACPI: Using IOAPIC for interrupt routing
[    0.299905] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.301019] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.303598] ACPI: Power Resource [PG00] (on)
[    0.304693] ACPI: Power Resource [PG01] (on)
[    0.305164] ACPI: Power Resource [PG02] (on)
[    0.307373] ACPI: Power Resource [WRST] (on)
[    0.307771] ACPI: Power Resource [WRST] (on)
[    0.308168] ACPI: Power Resource [WRST] (on)
[    0.308565] ACPI: Power Resource [WRST] (on)
[    0.308962] ACPI: Power Resource [WRST] (on)
[    0.309368] ACPI: Power Resource [WRST] (on)
[    0.309765] ACPI: Power Resource [WRST] (on)
[    0.310168] ACPI: Power Resource [WRST] (on)
[    0.310567] ACPI: Power Resource [WRST] (on)
[    0.310975] ACPI: Power Resource [WRST] (on)
[    0.311377] ACPI: Power Resource [WRST] (on)
[    0.311772] ACPI: Power Resource [WRST] (on)
[    0.312169] ACPI: Power Resource [WRST] (on)
[    0.312565] ACPI: Power Resource [WRST] (on)
[    0.312960] ACPI: Power Resource [WRST] (on)
[    0.313363] ACPI: Power Resource [WRST] (on)
[    0.313760] ACPI: Power Resource [WRST] (on)
[    0.315270] ACPI: Power Resource [WRST] (on)
[    0.315670] ACPI: Power Resource [WRST] (on)
[    0.316072] ACPI: Power Resource [WRST] (on)
[    0.330138] ACPI: Power Resource [FN00] (off)
[    0.330243] ACPI: Power Resource [FN01] (off)
[    0.330343] ACPI: Power Resource [FN02] (off)
[    0.330444] ACPI: Power Resource [FN03] (off)
[    0.330543] ACPI: Power Resource [FN04] (off)
[    0.331825] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.331831] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.331875] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.332595] PCI host bridge to bus 0000:00
[    0.332597] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.332598] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.332600] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.332601] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.332602] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.332603] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.332604] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.332605] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.332607] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.332608] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.332609] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.332610] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.332611] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.332612] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.332613] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.332614] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.332616] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.332617] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.332618] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc00ffff window]
[    0.332619] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.332627] pci 0000:00:00.0: [8086:5910] type 00 class 0x060000
[    0.333016] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.333059] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.333275] pci 0000:00:02.0: [8086:591b] type 00 class 0x030000
[    0.333285] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
[    0.333290] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.333294] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.333309] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.333524] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.333544] pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit]
[    0.333610] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.333857] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    0.333876] pci 0000:00:14.2: reg 0x10: [mem 0xdf32e000-0xdf32efff 64bit]
[    0.334069] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.334093] pci 0000:00:16.0: reg 0x10: [mem 0xdf32d000-0xdf32dfff 64bit]
[    0.334162] pci 0000:00:16.0: PME# supported from D3hot
[    0.334355] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
[    0.334371] pci 0000:00:17.0: reg 0x10: [mem 0xdf328000-0xdf329fff]
[    0.334378] pci 0000:00:17.0: reg 0x14: [mem 0xdf32c000-0xdf32c0ff]
[    0.334385] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.334392] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.334398] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.334405] pci 0000:00:17.0: reg 0x24: [mem 0xdf32b000-0xdf32b7ff]
[    0.334443] pci 0000:00:17.0: PME# supported from D3hot
[    0.334620] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[    0.334684] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.334891] pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400
[    0.334954] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.335172] pci 0000:00:1f.0: [8086:a152] type 00 class 0x060100
[    0.335432] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.335445] pci 0000:00:1f.2: reg 0x10: [mem 0xdf324000-0xdf327fff]
[    0.335643] pci 0000:00:1f.3: [8086:a171] type 00 class 0x040300
[    0.335667] pci 0000:00:1f.3: reg 0x10: [mem 0xdf320000-0xdf323fff 64bit]
[    0.335691] pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit]
[    0.335737] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.335977] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.336036] pci 0000:00:1f.4: reg 0x10: [mem 0xdf32a000-0xdf32a0ff 64bit]
[    0.336105] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.336373] pci 0000:01:00.0: [10de:1d10] type 00 class 0x030200
[    0.336388] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[    0.336395] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.336403] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.336408] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.336413] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[    0.336561] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.336563] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.336566] pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.336569] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.336661] pci 0000:02:00.0: [8086:24fb] type 00 class 0x028000
[    0.336711] pci 0000:02:00.0: reg 0x10: [mem 0xdf200000-0xdf201fff 64bit]
[    0.336875] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.337039] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.337043] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf2fffff]
[    0.337125] pci 0000:03:00.0: [1969:10a1] type 00 class 0x020000
[    0.337156] pci 0000:03:00.0: reg 0x10: [mem 0xdf100000-0xdf13ffff 64bit]
[    0.337166] pci 0000:03:00.0: reg 0x18: [io  0xd000-0xd07f]
[    0.337273] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.337399] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.337402] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.337404] pci 0000:00:1c.3:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.340123] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.340189] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.340252] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.340314] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.340376] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.340438] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.340499] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.340561] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.341347] ACPI: EC: interrupt unblocked
[    0.341380] ACPI: EC: event unblocked
[    0.341395] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x13, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.341396] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.341461] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.341461] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.341461] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.341461] vgaarb: loaded
[    0.341461] pps_core: LinuxPPS API ver. 1 registered
[    0.341461] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.341461] PTP clock support registered
[    0.341461] EDAC MC: Ver: 3.0.0
[    0.341461] Registered efivars operations
[    0.360023] PCI: Using ACPI for IRQ routing
[    0.387712] PCI: pci_cache_line_size set to 64 bytes
[    0.387763] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.387764] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.387765] e820: reserve RAM buffer [mem 0x700b7018-0x73ffffff]
[    0.387766] e820: reserve RAM buffer [mem 0x732c6000-0x73ffffff]
[    0.387766] e820: reserve RAM buffer [mem 0x79cef000-0x7bffffff]
[    0.387768] e820: reserve RAM buffer [mem 0x7b3ff000-0x7bffffff]
[    0.387768] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff]
[    0.387841] NetLabel: Initializing
[    0.387842] NetLabel:  domain hash size = 128
[    0.387842] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.387852] NetLabel:  unlabeled traffic allowed by default
[    0.387855] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.387855] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.390000] clocksource: Switched to clocksource tsc-early
[    0.398688] VFS: Disk quotas dquot_6.6.0
[    0.398701] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.398750] pnp: PnP ACPI init
[    0.398985] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.398987] system 00:00: [io  0xffff] has been reserved
[    0.398988] system 00:00: [io  0xffff] has been reserved
[    0.398990] system 00:00: [io  0xffff] has been reserved
[    0.398991] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.398992] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.398997] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.399093] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.399097] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.399114] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.399149] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.399152] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.399187] pnp 00:04: Plug and Play ACPI device, IDs SYN1509 SYN1500 SYN0002 PNP0f13 SYN1507 (active)
[    0.399209] pnp 00:05: Plug and Play ACPI device, IDs MSI0007 PNP0303 (active)
[    0.399708] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.399710] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.399711] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.399712] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.399714] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.399715] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.399717] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.399718] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.399720] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.399721] system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.399724] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.399765] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.399767] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.399768] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.399770] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.399771] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.399774] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.399776] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.399779] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.400116] system 00:08: [io  0xff00-0xfffe] has been reserved
[    0.400119] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.401483] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.401485] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.401486] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.401490] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.402504] pnp: PnP ACPI: found 10 devices
[    0.407975] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.407993] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.407995] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.407998] pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.408000] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.408003] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.408007] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf2fffff]
[    0.408012] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.408014] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.408017] pci 0000:00:1c.3:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.408023] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.408024] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.408025] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.408027] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.408028] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.408029] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.408030] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.408031] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.408032] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.408034] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.408035] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.408036] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.408037] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.408038] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.408040] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.408041] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.408042] pci_bus 0000:00: resource 20 [mem 0x80000000-0xdfffffff window]
[    0.408043] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
[    0.408044] pci_bus 0000:00: resource 22 [mem 0xfc000000-0xfc00ffff window]
[    0.408046] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.408047] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[    0.408048] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.408049] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf2fffff]
[    0.408051] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.408052] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
[    0.408228] NET: Registered protocol family 2
[    0.408326] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.408352] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.408452] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.408581] TCP: Hash tables configured (established 65536 bind 65536)
[    0.408608] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.408632] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.408677] NET: Registered protocol family 1
[    0.408689] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.408944] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
[    0.408947] PCI: CLS 64 bytes, default 64
[    0.408972] Unpacking initramfs...
[    0.510045] Freeing initrd memory: 7548K
[    0.510059] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.510062] software IO TLB [mem 0x6c0b7000-0x700b7000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.510089] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879c5f06f2, max_idle_ns: 440795220049 ns
[    0.510106] clocksource: Switched to clocksource tsc
[    0.510235] Scanning for low memory corruption every 60 seconds
[    0.510715] Initialise system trusted keyrings
[    0.510723] Key type blacklist registered
[    0.510759] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.511669] zbud: loaded
[    0.511944] pstore: using lz4hc compression
[    0.512728] Key type asymmetric registered
[    0.512729] Asymmetric key parser 'x509' registered
[    0.512759] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.512787] io scheduler noop registered
[    0.512788] io scheduler deadline registered
[    0.512820] io scheduler cfq registered (default)
[    0.512821] io scheduler mq-deadline registered
[    0.512822] io scheduler kyber registered
[    0.512827] io scheduler bfq registered
[    0.513439] efifb: probing for efifb
[    0.513450] efifb: framebuffer at 0xb0000000, using 1876k, total 1875k
[    0.513451] efifb: mode is 800x600x32, linelength=3200, pages=1
[    0.513451] efifb: scrolling: redraw
[    0.513453] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.514299] Console: switching to colour frame buffer device 100x37
[    0.515071] fb0: EFI VGA frame buffer device
[    0.515077] intel_idle: MWAIT substates: 0x11142120
[    0.515078] intel_idle: v0.4.1 model 0x9E
[    0.515397] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.515440] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:01/PNP0C0D:00/input/input0
[    0.518805] ACPI: Lid Switch [LID0]
[    0.518872] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.518879] ACPI: Sleep Button [SLPB]
[    0.518904] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    0.518908] ACPI: Power Button [PWRB]
[    0.518935] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.518973] ACPI: Power Button [PWRF]
[    0.569039] thermal LNXTHERM:00: registered as thermal_zone0
[    0.569040] ACPI: Thermal Zone [THRM] (31 C)
[    0.617320] thermal LNXTHERM:01: registered as thermal_zone1
[    0.617322] ACPI: Thermal Zone [TZ00] (28 C)
[    0.617515] thermal LNXTHERM:02: registered as thermal_zone2
[    0.617516] ACPI: Thermal Zone [TZ01] (30 C)
[    0.617805] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.619623] intel_pstate: Intel P-state driver initializing
[    0.619669] intel_pstate: Disabling energy efficiency optimization
[    0.620134] intel_pstate: HWP enabled
[    0.620406] ledtrig-cpu: registered to indicate activity on CPUs
[    0.620425] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:07 [mem 0xfdb00000-0xfdffffff]
[    0.620429] caller pmc_core_probe+0x88/0x215 mapping multiple BARs
[    0.620436] intel_pmc_core:  initialized
[    0.620640] NET: Registered protocol family 10
[    0.624655] Segment Routing with IPv6
[    0.624677] NET: Registered protocol family 17
[    0.625505] RAS: Correctable Errors collector initialized.
[    0.625572] microcode: sig=0x906e9, pf=0x20, revision=0x48
[    0.625797] microcode: Microcode Update Driver: v2.2.
[    0.625806] sched_clock: Marking stable (625792650, 0)->(712814533, -87021883)
[    0.626071] registered taskstats version 1
[    0.626081] Loading compiled-in X.509 certificates
[    0.626099] zswap: loaded using pool lzo/zbud
[    0.629731] Key type big_key registered
[    0.631397]   Magic number: 10:337:733
[    0.631407] hwmon hwmon0: hash matches
[    0.631473] hctosys: unable to open rtc device (rtc0)
[    0.784486] Freeing unused kernel memory: 1476K
[    0.784487] Write protecting the kernel read-only data: 16384k
[    0.785436] Freeing unused kernel memory: 2016K
[    0.786193] Freeing unused kernel memory: 608K
[    0.877582] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.881399] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.881422] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.885278] SCSI subsystem initialized
[    0.887577] ACPI: bus type USB registered
[    0.887595] usbcore: registered new interface driver usbfs
[    0.887602] usbcore: registered new interface driver hub
[    0.887631] usbcore: registered new device driver usb
[    0.891396] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.891400] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.891492] libata version 3.00 loaded.
[    0.892464] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.892469] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.892593] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    0.892595] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.892596] usb usb1: Product: xHCI Host Controller
[    0.892596] usb usb1: Manufacturer: Linux 4.17.3-1-ARCH xhci-hcd
[    0.892597] usb usb1: SerialNumber: 0000:00:14.0
[    0.892675] hub 1-0:1.0: USB hub found
[    0.892690] hub 1-0:1.0: 16 ports detected
[    0.893594] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.893596] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.893598] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    0.893624] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
[    0.893625] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.893626] usb usb2: Product: xHCI Host Controller
[    0.893627] usb usb2: Manufacturer: Linux 4.17.3-1-ARCH xhci-hcd
[    0.893628] usb usb2: SerialNumber: 0000:00:14.0
[    0.893702] hub 2-0:1.0: USB hub found
[    0.893712] hub 2-0:1.0: 8 ports detected
[    0.893971] usb: port power management may be unreliable
[    0.894300] ahci 0000:00:17.0: version 3.0
[    0.902486] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.904769] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0xc impl SATA mode
[    0.904771] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst 
[    0.914237] scsi host0: ahci
[    0.914567] scsi host1: ahci
[    0.914923] scsi host2: ahci
[    0.915187] scsi host3: ahci
[    0.915238] ata1: DUMMY
[    0.915239] ata2: DUMMY
[    0.915240] ata3: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b200 irq 121
[    0.915242] ata4: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b280 irq 121
[    1.223567] usb 1-8: new full-speed USB device number 2 using xhci_hcd
[    1.227275] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.227300] ata4: SATA link down (SStatus 4 SControl 300)
[    1.356748] ata3.00: ATA-10: ST1000LM048-2E7172, SDM1, max UDMA/133
[    1.356753] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.367632] usb 1-8: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.03
[    1.367637] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.367640] usb 1-8: Product: USB Receiver
[    1.367643] usb 1-8: Manufacturer: Logitech
[    1.374492] hidraw: raw HID events driver (C) Jiri Kosina
[    1.380065] usbcore: registered new interface driver usbhid
[    1.380066] usbhid: USB HID core driver
[    1.381212] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-8/input2
[    1.493799] usb 1-10: new full-speed USB device number 3 using xhci_hcd
[    1.496436] input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input6
[    1.496638] hid-generic 0003:046D:101B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:14.0-8:1
[    1.504052] input: Logitech M705 as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input7
[    1.504231] logitech-hidpp-device 0003:046D:101B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M705] on usb-0000:00:14.0-8:1
[    1.635182] usb 1-10: New USB device found, idVendor=8087, idProduct=0aa7, bcdDevice= 0.01
[    1.635187] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.760457] usb 1-11: new high-speed USB device number 4 using xhci_hcd
[    1.959553] usb 1-11: New USB device found, idVendor=04f2, idProduct=b521, bcdDevice=66.70
[    1.959558] usb 1-11: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.959562] usb 1-11: Product: USB 2.0 Webcam Device
[    1.959565] usb 1-11: Manufacturer: Generic
[    1.959568] usb 1-11: SerialNumber: 200901010001
[    2.087123] usb 1-12: new high-speed USB device number 5 using xhci_hcd
[    2.227798] usb 1-12: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[    2.227804] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.227807] usb 1-12: Product: USB2.0-CRW
[    2.227811] usb 1-12: Manufacturer: Generic
[    2.227814] usb 1-12: SerialNumber: 20100201396000000
[    2.233470] usbcore: registered new interface driver rtsx_usb
[    2.694613] ata3.00: configured for UDMA/133
[    2.704470] scsi 2:0:0:0: Direct-Access     ATA      ST1000LM048-2E71 SDM1 PQ: 0 ANSI: 5
[    2.710760] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.710765] sd 2:0:0:0: [sda] 4096-byte physical blocks
[    2.710795] sd 2:0:0:0: [sda] Write Protect is off
[    2.710801] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.710848] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.774516]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
[    2.776388] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.371397] random: fast init done
[    4.778735] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    5.227779] random: crng init done
[    6.846454] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    6.864543] systemd[1]: Detected architecture x86-64.
[    6.899945] systemd[1]: Set hostname to <hect-arch>.
[   10.099448] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   10.100380] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.103564] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   10.104744] systemd[1]: Listening on Process Core Dump Socket.
[   10.104917] systemd[1]: Created slice system-getty.slice.
[   10.104962] systemd[1]: Reached target Login Prompts.
[   10.136610] systemd[1]: Listening on LVM2 poll daemon socket.
[   10.660163] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   10.739376] vboxdrv: loading out-of-tree module taints kernel.
[   10.757596] vboxdrv: Found 8 processor cores
[   10.777209] vboxdrv: TSC mode is Invariant, tentative frequency 2807997440 Hz
[   10.777212] vboxdrv: Successfully loaded version 5.2.14 (interface 0x00290001)
[   10.787064] EXT4-fs (sda7): re-mounted. Opts: data=ordered
[   10.871848] VBoxPciLinuxInit
[   10.871857] vboxpci: IOMMU not found (not registered)
[   10.953217] systemd-journald[256]: Received request to flush runtime journal from PID 1
[   11.119068] VBoxNetAdp: Successfully started.
[   11.178118] VBoxNetFlt: Successfully started.
[   14.183189] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   14.312193] rtc_cmos 00:02: RTC can wake from S4
[   14.312739] rtc_cmos 00:02: registered as rtc0
[   14.312777] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[   14.500672] ACPI: AC Adapter [ADP1] (off-line)
[   14.608920] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.620234] ACPI: Battery Slot [BAT1] (battery present)
[   14.641031] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[   14.641034] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   14.641036] RAPL PMU: hw unit of domain package 2^-14 Joules
[   14.641037] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   14.641039] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   14.641040] RAPL PMU: hw unit of domain psys 2^-14 Joules
[   14.660353] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[   14.660403] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[   14.895344] input: MSI WMI hotkeys as /devices/virtual/input/input10
[   15.122472] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   15.279856] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4728]
[   15.309013] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1128..]
[   15.309032] psmouse serio1: synaptics: Your touchpad (PNP: SYN1509 SYN1500 SYN0002 PNP0f13 SYN1507) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[   15.334202] cryptd: max_cpu_qlen set to 1000
[   15.365376] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00323/0x840300/0x26800/0x0, board id: 3163, fw id: 2286728
[   15.389305] Linux agpgart interface v0.103
[   15.399744] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [4c:cc:6a:e2:bd:6e]
[   15.400878] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[   15.410443] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   15.411717] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   15.442559] iTCO_vendor_support: vendor-support=0
[   15.519063] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   15.519250] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[   15.519463] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   15.589819] alx 0000:03:00.0 enp3s0: renamed from eth0
[   15.942432] AVX2 version of gcm_enc/dec engaged.
[   15.942433] AES CTR mode by8 optimization enabled
[   15.946811] mousedev: PS/2 mouse device common for all mice
[   16.097129] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   16.097137] cfg80211: failed to load regulatory.db
[   16.265785] Intel(R) Wireless WiFi driver for Linux
[   16.265786] Copyright(c) 2003- 2015 Intel Corporation
[   16.265841] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[   16.285068] iwlwifi 0000:02:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
[   16.868254] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[   17.228572] intel_rapl: Found RAPL domain package
[   17.228575] intel_rapl: Found RAPL domain core
[   17.228577] intel_rapl: Found RAPL domain uncore
[   17.228579] intel_rapl: Found RAPL domain dram
[   17.412083] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220
[   17.430073] iwlwifi 0000:02:00.0: base HW address: 1c:4d:70:8f:fe:53
[   17.467563] checking generic (b0000000 1d5000) vs hw (b0000000 10000000)
[   17.467564] fb: switching to inteldrmfb from EFI VGA
[   17.467574] Console: switching to colour dummy device 80x25
[   17.467701] [drm] Replacing VGA console driver
[   17.468523] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   17.468523] [drm] Driver supports precise vblank timestamp query.
[   17.468888] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   17.476030] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
[   17.477664] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   17.477976] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[   17.478026] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[   17.478045] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input12
[   17.478145] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   17.489574] fbcon: inteldrmfb (fb0) is primary device
[   17.534301] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   17.535653] thermal thermal_zone5: failed to read out thermal zone (-61)
[   17.599614] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[   17.629445] media: Linux media interface: v0.10
[   17.729295] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[   17.840241] Adding 3145724k swap on /dev/sda6.  Priority:-2 extents:1 across:3145724k FS
[   17.914047] Linux video capture interface: v2.00
[   17.922323] Bluetooth: Core ver 2.22
[   17.922336] NET: Registered protocol family 31
[   17.922336] Bluetooth: HCI device and connection manager initialized
[   17.922339] Bluetooth: HCI socket layer initialized
[   17.922340] Bluetooth: L2CAP socket layer initialized
[   17.922343] Bluetooth: SCO socket layer initialized
[   18.162837] usbcore: registered new interface driver btusb
[   18.171892] Bluetooth: hci0: read Intel version: 370810225019140f00
[   18.195135] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-22.50.19.14.f.bseq
[   18.344762] uvcvideo: Found UVC 1.00 device USB 2.0 Webcam Device (04f2:b521)
[   18.355390] uvcvideo 1-11:1.0: Entity type for entity Extension 5 was not initialized!
[   18.355396] uvcvideo 1-11:1.0: Entity type for entity Extension 2 was not initialized!
[   18.355401] uvcvideo 1-11:1.0: Entity type for entity Processing 3 was not initialized!
[   18.355406] uvcvideo 1-11:1.0: Entity type for entity Camera 1 was not initialized!
[   18.355692] input: USB 2.0 Webcam Device: USB 2.0  as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/input/input13
[   18.355941] usbcore: registered new interface driver uvcvideo
[   18.355942] USB Video Class driver (1.1.1)
[   18.578919] Bluetooth: hci0: Intel firmware patch completed and activated
[   18.592794] Console: switching to colour frame buffer device 240x67
[   18.619546] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   18.727165] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x15/0x1b/0x17/0x0/0x0) type:speaker
[   18.727170] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   18.727173] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[   18.727175] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   18.727178] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   18.727180] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   18.727182] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   18.727185] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   18.875150] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[   18.875325] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[   18.875480] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[   18.877122] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[   18.877280] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[   18.877428] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[   18.877592] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[   19.952440] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   24.056956] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
[   24.262050] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: data=ordered
[   28.936347] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   28.936351] Bluetooth: BNEP filters: protocol multicast
[   28.936358] Bluetooth: BNEP socket layer initialized
[   33.142997] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   33.143844] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   33.176244] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   33.247604] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   33.331590] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   34.016143] bbswitch: version 0.8
[   34.016155] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   34.016165] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[   34.016186] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20180313/nsarguments-66)
[   34.016488] bbswitch: detected an Optimus _DSM function
[   34.016509] pci 0000:01:00.0: enabling device (0006 -> 0007)
[   34.016739] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[   34.020661] bbswitch: disabling discrete graphics
[   34.523938] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   37.980833] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   38.921446] wlp2s0: authenticate with a8:d3:f7:8f:71:9e
[   38.925722] wlp2s0: send auth to a8:d3:f7:8f:71:9e (try 1/3)
[   38.927881] wlp2s0: authenticated
[   38.930085] wlp2s0: associate with a8:d3:f7:8f:71:9e (try 1/3)
[   38.933981] wlp2s0: RX AssocResp from a8:d3:f7:8f:71:9e (capab=0x1411 status=0 aid=5)
[   38.936458] wlp2s0: associated
[   39.440042] wlp2s0: Limiting TX power to 22 (22 - 0) dBm as advertised by a8:d3:f7:8f:71:9e
[   39.440792] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   67.598472] Bluetooth: RFCOMM TTY layer initialized
[   67.598477] Bluetooth: RFCOMM socket layer initialized
[   67.598483] Bluetooth: RFCOMM ver 1.11
[  220.855999] fuse init (API version 7.26)
[  229.862315] rfkill: input handler disabled
[ 1762.388027] logitech-hidpp-device 0003:046D:101B.0004: HID++ 1.0 device connected.
[ 3367.753209] cinnamon[6457]: segfault at 38d2879008 ip 00007f2e71cd3ab0 sp 00007ffdfc5db458 error 4 in libX11.so.6.3.0[7f2e71ca3000+139000]
[ 3527.943250] rfkill: input handler enabled
[ 3550.850980] rfkill: input handler disabled
[ 5137.842731] perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79800
[ 5579.964414] rfkill: input handler enabled
[ 5603.863351] rfkill: input handler disabled
[10148.157000] perf: interrupt took too long (3142 > 3128), lowering kernel.perf_event_max_sample_rate to 63600

and

pacman -Qs nvidia
local/bumblebee 3.2.1-17
    NVIDIA Optimus support for Linux through VirtualGL
local/lib32-libvdpau 1.1.1-3
    Nvidia VDPAU library
local/lib32-nvidia-390xx-utils 390.67-1
    NVIDIA drivers utilities (32-bit), 390xx legacy branch
local/libvdpau 1.1.1+3+ga21bf7a-1
    Nvidia VDPAU library
local/libxnvctrl 396.24-1
    NVIDIA NV-CONTROL X extension
local/nvidia-390xx 390.67-5
    NVIDIA drivers for linux, 390xx legacy branch
local/nvidia-390xx-utils 390.67-2
    NVIDIA drivers utilities
local/nvidia-settings 396.24-1
    Tool for configuring the NVIDIA graphics driver

Offline

#10 2018-07-05 16:21:20

loqs
Member
Registered: 2014-03-06
Posts: 6,196

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

What is the status of bumblebeed.service ?

Offline

#11 2018-07-05 16:31:58

hmors
Member
Registered: 2018-07-04
Posts: 13

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

here the output

 systemctl status bumblebeed.service 
 bumblebeed.service - Bumblebee C Daemon
   Loaded: loaded (/usr/lib/systemd/system/bumblebeed.service; enabled; vendor preset: disabled)
   Active: active (running) since Thu 2018-07-05 07:42:57 CDT; 3h 45min ago
 Main PID: 489 (bumblebeed)
    Tasks: 1 (limit: 4915)
   Memory: 1.6M
   CGroup: /system.slice/bumblebeed.service
           └─489 /usr/bin/bumblebeed

Jul 05 07:42:57 hect-arch systemd[1]: Started Bumblebee C Daemon.
Jul 05 07:43:05 hect-arch bumblebeed[489]: [   34.020460] [INFO]/usr/bin/bumblebeed 3.2.1 started

Offline

#12 2018-07-05 16:44:41

loqs
Member
Registered: 2014-03-06
Posts: 6,196

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

Please post the contents of /etc/X11/xorg.conf if it exists and any .conf file in /etc/X11/xorg.conf.d/

Offline

#13 2018-07-05 16:52:01

hmors
Member
Registered: 2018-07-04
Posts: 13

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

the contents of /etc/X11/xorg.conf.d/ are:

 00-keyboard.conf

Section "InputClass"
        Identifier "system-keyboard"
        MatchIsKeyboard "on"
        Option "XkbLayout" "us,latam"
        Option "XkbVariant" "intl,"
EndSection

and

20-nvidia.conf

Section "Device"
        Identifier "Nvidia Card"
        Driver "nvidia"
        VendorName "NVIDIA Corporation"
        BoardName "GeForce MX150"
EndSection

Offline

#14 2018-07-05 16:58:20

loqs
Member
Registered: 2014-03-06
Posts: 6,196

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

If you disabled / remove 20-nvidia.conf and restart GDM what is the xorg.log then if it still fails?

Offline

#15 2018-07-05 17:37:05

hmors
Member
Registered: 2018-07-04
Posts: 13

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

I removed the 20-nvidia.conf, and now I'm able to initiate cinnamon; but so far it appears to run a little bit slow. And in the ~/.local/share/xorg/./Xorg.0.log
appears the error

(EE) Failed to load module "fbdev" (module does not exist, 0)
[    68.437] (II) LoadModule: "vesa"
[    68.437] (WW) Warning, couldn't open module vesa
[    68.437] (EE) Failed to load module "vesa" (module does not exist, 0)
[    68.437] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    68.437] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43

this is my integrate card:

lspci -k | grep -A 2 -E "(VGA|3D)"
00:02.0 VGA compatible controller: Intel Corporation Device 591b (rev 04)
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device 1207
	Kernel driver in use: i915
--
01:00.0 3D controller: NVIDIA Corporation GP108M [GeForce MX150] (rev ff)
	Kernel modules: nouveau, nvidia_drm, nvidia
02:00.0 Network controller: Intel Corporation Dual Band Wireless-AC 3168NGW [Stone Peak] (rev 10)

do you think that I need to install another intel driver?. Thank you for your help

Offline

#16 2018-07-05 17:40:26

loqs
Member
Registered: 2014-03-06
Posts: 6,196

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

You could try installing xf86-video-intel please also post the full xorg.log

Offline

#17 2018-07-05 17:47:57

hmors
Member
Registered: 2018-07-04
Posts: 13

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

Right now I have the xf86-video-intel driver installed. This is the output of ~/.local/share/xorg/Xorg.0.log

~/.local/share/xorg/Xorg.0.log

[    67.948] (--) Log file renamed from "/home/hector/.local/share/xorg/Xorg.pid-805.log" to "/home/hector/.local/share/xorg/Xorg.0.log"
[    67.970] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[    67.972] 
X.Org X Server 1.20.0
X Protocol Version 11, Revision 0
[    67.972] Build Operating System: Linux Arch Linux
[    67.972] Current Operating System: Linux hect-arch 4.17.3-1-ARCH #1 SMP PREEMPT Tue Jun 26 04:42:36 UTC 2018 x86_64
[    67.972] Kernel command line: initrd=\initramfs-linux.img root=PARTUUID=000a16c5-2230-b5fd-26de-f7478a2d1400 rootfstype=ext4 add_efi_memmap rw
[    67.972] Build Date: 18 June 2018  03:12:37PM
[    67.972]  
[    67.972] Current version of pixman: 0.34.0
[    67.972] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    67.972] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    67.972] (==) Log file: "/home/hector/.local/share/xorg/Xorg.0.log", Time: Thu Jul  5 12:23:48 2018
[    67.973] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    67.973] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    68.023] (==) No Layout section.  Using the first Screen section.
[    68.023] (==) No screen section available. Using defaults.
[    68.023] (**) |-->Screen "Default Screen Section" (0)
[    68.024] (**) |   |-->Monitor "<default monitor>"
[    68.024] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    68.024] (==) Automatically adding devices
[    68.024] (==) Automatically enabling devices
[    68.024] (==) Automatically adding GPU devices
[    68.024] (==) Automatically binding GPU devices
[    68.024] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    68.024] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    68.024] 	Entry deleted from font path.
[    68.024] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[    68.024] 	Entry deleted from font path.
[    68.024] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[    68.024] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/100dpi
[    68.024] (==) ModulePath set to "/usr/lib/xorg/modules"
[    68.024] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    68.024] (II) Module ABI versions:
[    68.024] 	X.Org ANSI C Emulation: 0.4
[    68.024] 	X.Org Video Driver: 24.0
[    68.024] 	X.Org XInput driver : 24.1
[    68.024] 	X.Org Server Extension : 10.0
[    68.026] (++) using VT number 2

[    68.030] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[    68.031] (II) xfree86: Adding drm device (/dev/dri/card0)
[    68.033] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[    68.037] (--) PCI:*(0@0:2:0) 8086:591b:1462:1207 rev 4, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    68.037] (--) PCI: (1@0:0:0) 10de:1d10:1462:1207 rev 161, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    68.037] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    68.037] (II) LoadModule: "glx"
[    68.166] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    68.242] (II) Module glx: vendor="X.Org Foundation"
[    68.242] 	compiled for 1.20.0, module version = 1.0.0
[    68.243] 	ABI class: X.Org Server Extension, version 10.0
[    68.243] (II) Applying OutputClass "intel" to /dev/dri/card0
[    68.243] 	loading driver: modesetting
[    68.243] (==) Matched modesetting as autoconfigured driver 0
[    68.243] (==) Matched intel as autoconfigured driver 1
[    68.243] (==) Matched fbdev as autoconfigured driver 2
[    68.243] (==) Matched vesa as autoconfigured driver 3
[    68.243] (==) Assigned the driver to the xf86ConfigLayout
[    68.243] (II) LoadModule: "modesetting"
[    68.243] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    68.266] (II) Module modesetting: vendor="X.Org Foundation"
[    68.266] 	compiled for 1.20.0, module version = 1.20.0
[    68.266] 	Module class: X.Org Video Driver
[    68.266] 	ABI class: X.Org Video Driver, version 24.0
[    68.266] (II) LoadModule: "intel"
[    68.266] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    68.379] (II) Module intel: vendor="X.Org Foundation"
[    68.379] 	compiled for 1.20.0, module version = 2.99.917
[    68.379] 	Module class: X.Org Video Driver
[    68.379] 	ABI class: X.Org Video Driver, version 24.0
[    68.379] (II) LoadModule: "fbdev"
[    68.437] (WW) Warning, couldn't open module fbdev
[    68.437] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    68.437] (II) LoadModule: "vesa"
[    68.437] (WW) Warning, couldn't open module vesa
[    68.437] (EE) Failed to load module "vesa" (module does not exist, 0)
[    68.437] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    68.437] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    68.437] (II) intel: Driver for Intel(R) HD Graphics
[    68.437] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    68.437] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    68.437] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    68.550] (II) modeset(0): using drv /dev/dri/card0
[    68.550] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    68.550] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    68.550] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    68.550] (==) modeset(0): RGB weight 888
[    68.550] (==) modeset(0): Default visual is TrueColor
[    68.550] (II) Loading sub module "glamoregl"
[    68.550] (II) LoadModule: "glamoregl"
[    68.550] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    68.593] (II) Module glamoregl: vendor="X.Org Foundation"
[    68.594] 	compiled for 1.20.0, module version = 1.0.1
[    68.594] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    68.705] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) HD Graphics 630 (Kaby Lake GT2) 
[    68.705] (II) modeset(0): glamor initialized
[    68.706] (II) modeset(0): Output eDP-1 has no monitor section
[    68.706] (II) modeset(0): Output DP-1 has no monitor section
[    68.710] (II) modeset(0): Output HDMI-1 has no monitor section
[    68.716] (II) modeset(0): Output HDMI-2 has no monitor section
[    68.718] (II) modeset(0): EDID for output eDP-1
[    68.718] (II) modeset(0): Manufacturer: LGD  Model: 533  Serial#: 0
[    68.718] (II) modeset(0): Year: 2016  Week: 0
[    68.718] (II) modeset(0): EDID Version: 1.4
[    68.718] (II) modeset(0): Digital Display Input
[    68.718] (II) modeset(0): 6 bits per channel
[    68.718] (II) modeset(0): Digital interface is DisplayPort
[    68.718] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    68.718] (II) modeset(0): Gamma: 2.20
[    68.718] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[    68.718] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    68.718] (II) modeset(0): First detailed timing is preferred mode
[    68.718] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[    68.718] (II) modeset(0): redX: 0.580 redY: 0.350   greenX: 0.340 greenY: 0.560
[    68.718] (II) modeset(0): blueX: 0.155 blueY: 0.125   whiteX: 0.313 whiteY: 0.329
[    68.718] (II) modeset(0): Manufacturer's mask: 0
[    68.718] (II) modeset(0): Supported detailed timing:
[    68.718] (II) modeset(0): clock: 138.7 MHz   Image Size:  344 x 194 mm
[    68.718] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    68.718] (II) modeset(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
[    68.718] (II) modeset(0):  LG Display
[    68.718] (II) modeset(0):  LP156WF6-SPK3
[    68.718] (II) modeset(0): EDID (in hex):
[    68.718] (II) modeset(0): 	00ffffffffffff0030e4330500000000
[    68.719] (II) modeset(0): 	001a010495221378eaa1c59459578f27
[    68.719] (II) modeset(0): 	20505400000001010101010101010101
[    68.719] (II) modeset(0): 	0101010101012e3680a070381f403020
[    68.719] (II) modeset(0): 	350058c21000001a0000000000000000
[    68.719] (II) modeset(0): 	00000000000000000000000000fe004c
[    68.719] (II) modeset(0): 	4720446973706c61790a2020000000fe
[    68.719] (II) modeset(0): 	004c503135365746362d53504b3300bf
[    68.719] (II) modeset(0): Printing probed modes for output eDP-1
[    68.719] (II) modeset(0): Modeline "1920x1080"x60.0  138.70  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[    68.719] (II) modeset(0): Modeline "1920x1080"x120.0  356.38  1920 2080 2288 2656  1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[    68.719] (II) modeset(0): Modeline "1920x1080"x119.9  266.50  1920 1944 1960 2000  1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[    68.719] (II) modeset(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[    68.719] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[    68.719] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    68.719] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[    68.719] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    68.719] (II) modeset(0): Modeline "1600x900"x120.0  246.00  1600 1728 1900 2200  900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[    68.719] (II) modeset(0): Modeline "1600x900"x119.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[    68.719] (II) modeset(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[    68.719] (II) modeset(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[    68.719] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    68.719] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[    68.719] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[    68.719] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    68.719] (II) modeset(0): Modeline "1440x810"x120.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[    68.719] (II) modeset(0): Modeline "1440x810"x119.9  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[    68.719] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[    68.719] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[    68.719] (II) modeset(0): Modeline "1280x800"x120.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[    68.719] (II) modeset(0): Modeline "1280x800"x119.9  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[    68.720] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[    68.720] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[    68.720] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[    68.720] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    68.720] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    68.720] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    68.720] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    68.720] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    68.720] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    68.720] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    68.720] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    68.720] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    68.720] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    68.720] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    68.720] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    68.720] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    68.720] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    68.720] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    68.720] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    68.720] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    68.720] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    68.720] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    68.720] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    68.720] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    68.720] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    68.720] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    68.720] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    68.720] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    68.720] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    68.720] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    68.720] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    68.720] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    68.720] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    68.720] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    68.720] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    68.720] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    68.720] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    68.720] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    68.720] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    68.720] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    68.720] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    68.720] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    68.720] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    68.720] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    68.720] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    68.720] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    68.720] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    68.720] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    68.720] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    68.720] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    68.720] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    68.721] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    68.721] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    68.721] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    68.721] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    68.721] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    68.721] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    68.721] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    68.721] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    68.721] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    68.721] (II) modeset(0): EDID for output DP-1
[    68.724] (II) modeset(0): EDID for output HDMI-1
[    68.731] (II) modeset(0): EDID for output HDMI-2
[    68.731] (II) modeset(0): Output eDP-1 connected
[    68.731] (II) modeset(0): Output DP-1 disconnected
[    68.731] (II) modeset(0): Output HDMI-1 disconnected
[    68.731] (II) modeset(0): Output HDMI-2 disconnected
[    68.731] (II) modeset(0): Using exact sizes for initial modes
[    68.731] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[    68.731] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    68.731] (==) modeset(0): DPI set to (96, 96)
[    68.731] (II) Loading sub module "fb"
[    68.731] (II) LoadModule: "fb"
[    68.731] (II) Loading /usr/lib/xorg/modules/libfb.so
[    68.771] (II) Module fb: vendor="X.Org Foundation"
[    68.771] 	compiled for 1.20.0, module version = 1.0.0
[    68.771] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    68.771] (II) UnloadModule: "intel"
[    68.771] (II) Unloading intel
[    69.287] (==) modeset(0): Backing store enabled
[    69.287] (==) modeset(0): Silken mouse disabled
[    69.327] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    69.327] (==) modeset(0): DPMS enabled
[    69.328] (II) modeset(0): [DRI2] Setup complete
[    69.328] (II) modeset(0): [DRI2]   DRI driver: i965
[    69.328] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    69.328] (II) Initializing extension Generic Event Extension
[    69.328] (II) Initializing extension SHAPE
[    69.328] (II) Initializing extension MIT-SHM
[    69.328] (II) Initializing extension XInputExtension
[    69.328] (II) Initializing extension XTEST
[    69.328] (II) Initializing extension BIG-REQUESTS
[    69.328] (II) Initializing extension SYNC
[    69.328] (II) Initializing extension XKEYBOARD
[    69.328] (II) Initializing extension XC-MISC
[    69.328] (II) Initializing extension SECURITY
[    69.328] (II) Initializing extension XFIXES
[    69.328] (II) Initializing extension RENDER
[    69.328] (II) Initializing extension RANDR
[    69.328] (II) Initializing extension COMPOSITE
[    69.328] (II) Initializing extension DAMAGE
[    69.328] (II) Initializing extension MIT-SCREEN-SAVER
[    69.328] (II) Initializing extension DOUBLE-BUFFER
[    69.328] (II) Initializing extension RECORD
[    69.328] (II) Initializing extension DPMS
[    69.328] (II) Initializing extension Present
[    69.328] (II) Initializing extension DRI3
[    69.328] (II) Initializing extension X-Resource
[    69.328] (II) Initializing extension XVideo
[    69.328] (II) Initializing extension XVideo-MotionCompensation
[    69.328] (II) Initializing extension GLX
[    69.333] (II) AIGLX: Loaded and initialized i965
[    69.333] (II) GLX: Initialized DRI2 GL provider for screen 0
[    69.333] (II) Initializing extension XFree86-VidModeExtension
[    69.333] (II) Initializing extension XFree86-DGA
[    69.333] (II) Initializing extension XFree86-DRI
[    69.333] (II) Initializing extension DRI2
[    69.335] (II) modeset(0): Damage tracking initialized
[    69.335] (II) modeset(0): Setting screen physical size to 508 x 285
[    69.644] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    69.644] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    69.644] (**) Power Button: Applying InputClass "system-keyboard"
[    69.644] (II) LoadModule: "libinput"
[    69.644] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    69.666] (II) Module libinput: vendor="X.Org Foundation"
[    69.666] 	compiled for 1.19.6, module version = 0.27.1
[    69.666] 	Module class: X.Org XInput Driver
[    69.666] 	ABI class: X.Org XInput driver, version 24.1
[    69.666] (II) Using input driver 'libinput' for 'Power Button'
[    69.667] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 15 paused 0
[    69.667] (**) Power Button: always reports core events
[    69.667] (**) Option "Device" "/dev/input/event3"
[    69.667] (**) Option "_source" "server/udev"
[    69.667] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    69.667] (II) event3  - Power Button: device is a keyboard
[    69.667] (II) event3  - Power Button: device removed
[    69.667] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    69.667] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    69.668] (**) Option "xkb_layout" "us,latam"
[    69.668] (**) Option "xkb_variant" "intl,"
[    69.683] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    69.683] (II) event3  - Power Button: device is a keyboard
[    69.683] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[    69.683] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    69.683] (**) Video Bus: Applying InputClass "system-keyboard"
[    69.683] (II) Using input driver 'libinput' for 'Video Bus'
[    69.684] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 18 paused 0
[    69.684] (**) Video Bus: always reports core events
[    69.684] (**) Option "Device" "/dev/input/event9"
[    69.684] (**) Option "_source" "server/udev"
[    69.684] (II) event9  - Video Bus: is tagged by udev as: Keyboard
[    69.684] (II) event9  - Video Bus: device is a keyboard
[    69.684] (II) event9  - Video Bus: device removed
[    69.684] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event9"
[    69.684] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    69.684] (**) Option "xkb_layout" "us,latam"
[    69.684] (**) Option "xkb_variant" "intl,"
[    69.685] (II) event9  - Video Bus: is tagged by udev as: Keyboard
[    69.685] (II) event9  - Video Bus: device is a keyboard
[    69.685] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[    69.685] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    69.685] (**) Video Bus: Applying InputClass "system-keyboard"
[    69.685] (II) Using input driver 'libinput' for 'Video Bus'
[    69.685] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 19 paused 0
[    69.686] (**) Video Bus: always reports core events
[    69.686] (**) Option "Device" "/dev/input/event10"
[    69.686] (**) Option "_source" "server/udev"
[    69.686] (II) event10 - Video Bus: is tagged by udev as: Keyboard
[    69.686] (II) event10 - Video Bus: device is a keyboard
[    69.686] (II) event10 - Video Bus: device removed
[    69.686] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input12/event10"
[    69.686] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    69.686] (**) Option "xkb_layout" "us,latam"
[    69.686] (**) Option "xkb_variant" "intl,"
[    69.686] (II) event10 - Video Bus: is tagged by udev as: Keyboard
[    69.686] (II) event10 - Video Bus: device is a keyboard
[    69.687] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    69.687] (II) No input driver specified, ignoring this device.
[    69.687] (II) This device may have been added with another device file.
[    69.687] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    69.687] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    69.687] (**) Power Button: Applying InputClass "system-keyboard"
[    69.687] (II) Using input driver 'libinput' for 'Power Button'
[    69.687] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 20 paused 0
[    69.687] (**) Power Button: always reports core events
[    69.687] (**) Option "Device" "/dev/input/event2"
[    69.687] (**) Option "_source" "server/udev"
[    69.688] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    69.688] (II) event2  - Power Button: device is a keyboard
[    69.688] (II) event2  - Power Button: device removed
[    69.688] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[    69.688] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    69.688] (**) Option "xkb_layout" "us,latam"
[    69.688] (**) Option "xkb_variant" "intl,"
[    69.688] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    69.688] (II) event2  - Power Button: device is a keyboard
[    69.688] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    69.688] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    69.688] (**) Sleep Button: Applying InputClass "system-keyboard"
[    69.688] (II) Using input driver 'libinput' for 'Sleep Button'
[    69.689] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 21 paused 0
[    69.689] (**) Sleep Button: always reports core events
[    69.689] (**) Option "Device" "/dev/input/event1"
[    69.689] (**) Option "_source" "server/udev"
[    69.689] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    69.689] (II) event1  - Sleep Button: device is a keyboard
[    69.689] (II) event1  - Sleep Button: device removed
[    69.689] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    69.689] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    69.689] (**) Option "xkb_layout" "us,latam"
[    69.689] (**) Option "xkb_variant" "intl,"
[    69.689] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    69.689] (II) event1  - Sleep Button: device is a keyboard
[    69.690] (II) config/udev: Adding input device USB 2.0 Webcam Device: USB 2.0  (/dev/input/event11)
[    69.690] (**) USB 2.0 Webcam Device: USB 2.0 : Applying InputClass "libinput keyboard catchall"
[    69.690] (**) USB 2.0 Webcam Device: USB 2.0 : Applying InputClass "system-keyboard"
[    69.690] (II) Using input driver 'libinput' for 'USB 2.0 Webcam Device: USB 2.0 '
[    69.690] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 22 paused 0
[    69.690] (**) USB 2.0 Webcam Device: USB 2.0 : always reports core events
[    69.690] (**) Option "Device" "/dev/input/event11"
[    69.690] (**) Option "_source" "server/udev"
[    69.691] (II) event11 - USB 2.0 Webcam Device: USB 2.0 : is tagged by udev as: Keyboard
[    69.691] (II) event11 - USB 2.0 Webcam Device: USB 2.0 : device is a keyboard
[    69.691] (II) event11 - USB 2.0 Webcam Device: USB 2.0 : device removed
[    69.691] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/input/input13/event11"
[    69.691] (II) XINPUT: Adding extended input device "USB 2.0 Webcam Device: USB 2.0 " (type: KEYBOARD, id 11)
[    69.691] (**) Option "xkb_layout" "us,latam"
[    69.691] (**) Option "xkb_variant" "intl,"
[    69.691] (II) event11 - USB 2.0 Webcam Device: USB 2.0 : is tagged by udev as: Keyboard
[    69.691] (II) event11 - USB 2.0 Webcam Device: USB 2.0 : device is a keyboard
[    69.691] (II) config/udev: Adding input device Logitech M705 (/dev/input/event5)
[    69.691] (**) Logitech M705: Applying InputClass "libinput pointer catchall"
[    69.691] (II) Using input driver 'libinput' for 'Logitech M705'
[    69.692] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 23 paused 0
[    69.692] (**) Logitech M705: always reports core events
[    69.692] (**) Option "Device" "/dev/input/event5"
[    69.692] (**) Option "_source" "server/udev"
[    69.692] (II) event5  - Logitech M705: is tagged by udev as: Mouse
[    69.692] (II) event5  - Logitech M705: device set to 800 DPI
[    69.692] (II) event5  - Logitech M705: device is a pointer
[    69.692] (II) event5  - Logitech M705: device removed
[    69.692] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input7/event5"
[    69.692] (II) XINPUT: Adding extended input device "Logitech M705" (type: MOUSE, id 12)
[    69.692] (**) Option "AccelerationScheme" "none"
[    69.693] (**) Logitech M705: (accel) selected scheme none/0
[    69.693] (**) Logitech M705: (accel) acceleration factor: 2.000
[    69.693] (**) Logitech M705: (accel) acceleration threshold: 4
[    69.693] (II) event5  - Logitech M705: is tagged by udev as: Mouse
[    69.693] (II) event5  - Logitech M705: device set to 800 DPI
[    69.693] (II) event5  - Logitech M705: device is a pointer
[    69.693] (II) config/udev: Adding input device Logitech M705 (/dev/input/mouse0)
[    69.693] (II) No input driver specified, ignoring this device.
[    69.693] (II) This device may have been added with another device file.
[    69.693] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[    69.693] (II) No input driver specified, ignoring this device.
[    69.693] (II) This device may have been added with another device file.
[    69.694] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[    69.694] (II) No input driver specified, ignoring this device.
[    69.694] (II) This device may have been added with another device file.
[    69.694] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[    69.694] (II) No input driver specified, ignoring this device.
[    69.694] (II) This device may have been added with another device file.
[    69.694] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[    69.694] (II) No input driver specified, ignoring this device.
[    69.694] (II) This device may have been added with another device file.
[    69.694] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event16)
[    69.694] (II) No input driver specified, ignoring this device.
[    69.694] (II) This device may have been added with another device file.
[    69.694] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event17)
[    69.694] (II) No input driver specified, ignoring this device.
[    69.694] (II) This device may have been added with another device file.
[    69.694] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event18)
[    69.694] (II) No input driver specified, ignoring this device.
[    69.694] (II) This device may have been added with another device file.
[    69.695] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    69.695] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    69.695] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[    69.695] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    69.695] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 24 paused 0
[    69.695] (**) AT Translated Set 2 keyboard: always reports core events
[    69.695] (**) Option "Device" "/dev/input/event4"
[    69.695] (**) Option "_source" "server/udev"
[    69.696] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    69.696] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[    69.696] (II) event4  - AT Translated Set 2 keyboard: device removed
[    69.696] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    69.696] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    69.696] (**) Option "xkb_layout" "us,latam"
[    69.696] (**) Option "xkb_variant" "intl,"
[    69.696] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    69.696] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[    69.696] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[    69.696] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    69.696] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    69.696] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    69.696] (II) LoadModule: "synaptics"
[    69.696] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    69.731] (II) Module synaptics: vendor="X.Org Foundation"
[    69.731] 	compiled for 1.20.0, module version = 1.9.1
[    69.731] 	Module class: X.Org XInput Driver
[    69.731] 	ABI class: X.Org XInput driver, version 24.1
[    69.731] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    69.732] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 25 paused 0
[    69.732] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    69.732] (**) Option "Device" "/dev/input/event8"
[    69.732] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1284 - 5656 (res 41)
[    69.732] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1128 - 4728 (res 61)
[    69.732] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    69.732] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    69.732] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    69.732] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    69.732] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    69.732] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    69.732] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event8"
[    69.732] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[    69.732] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    69.732] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    69.732] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[    69.732] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    69.732] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    69.732] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    69.732] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    69.732] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    69.733] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    69.733] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    69.733] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    69.733] (II) No input driver specified, ignoring this device.
[    69.733] (II) This device may have been added with another device file.
[    69.734] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event7)
[    69.734] (**) MSI WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    69.734] (**) MSI WMI hotkeys: Applying InputClass "system-keyboard"
[    69.734] (II) Using input driver 'libinput' for 'MSI WMI hotkeys'
[    69.734] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 26 paused 0
[    69.734] (**) MSI WMI hotkeys: always reports core events
[    69.734] (**) Option "Device" "/dev/input/event7"
[    69.734] (**) Option "_source" "server/udev"
[    69.735] (II) event7  - MSI WMI hotkeys: is tagged by udev as: Keyboard
[    69.735] (II) event7  - MSI WMI hotkeys: device is a keyboard
[    69.735] (II) event7  - MSI WMI hotkeys: device removed
[    69.735] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event7"
[    69.735] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 15)
[    69.735] (**) Option "xkb_layout" "us,latam"
[    69.735] (**) Option "xkb_variant" "intl,"
[    69.735] (II) event7  - MSI WMI hotkeys: is tagged by udev as: Keyboard
[    69.735] (II) event7  - MSI WMI hotkeys: device is a keyboard
[    72.189] (II) modeset(0): EDID vendor "LGD", prod id 1331
[    72.189] (II) modeset(0): Printing DDC gathered Modelines:
[    72.189] (II) modeset(0): Modeline "1920x1080"x0.0  138.70  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[    72.202] (II) modeset(0): EDID vendor "LGD", prod id 1331
[    72.202] (II) modeset(0): Printing DDC gathered Modelines:
[    72.202] (II) modeset(0): Modeline "1920x1080"x0.0  138.70  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[    72.213] (II) modeset(0): EDID vendor "LGD", prod id 1331
[    72.213] (II) modeset(0): Printing DDC gathered Modelines:
[    72.213] (II) modeset(0): Modeline "1920x1080"x0.0  138.70  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[    72.226] (II) modeset(0): EDID vendor "LGD", prod id 1331
[    72.226] (II) modeset(0): Printing DDC gathered Modelines:
[    72.226] (II) modeset(0): Modeline "1920x1080"x0.0  138.70  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[    72.246] (II) modeset(0): EDID vendor "LGD", prod id 1331
[    72.246] (II) modeset(0): Printing DDC gathered Modelines:
[    72.246] (II) modeset(0): Modeline "1920x1080"x0.0  138.70  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[    77.622] (II) modeset(0): EDID vendor "LGD", prod id 1331
[    77.622] (II) modeset(0): Printing DDC gathered Modelines:
[    77.622] (II) modeset(0): Modeline "1920x1080"x0.0  138.70  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)

Offline

#18 2018-07-05 20:15:42

seth
Member
Registered: 2012-09-03
Posts: 8,663

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

Intel is installed, but modesetting is preferred.
You likely still have some configlet around that configures the modesetting driver?

Also please ensure to have read https://wiki.archlinux.org/index.php/NVIDIA_Optimus and the related articles to know your options reg. optimus systems.

Offline

#19 2018-07-05 21:45:17

hmors
Member
Registered: 2018-07-04
Posts: 13

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

seth wrote:

Intel is installed, but modesetting is preferred.
You likely still have some configlet around that configures the modesetting driver?

Also please ensure to have read https://wiki.archlinux.org/index.php/NVIDIA_Optimus and the related articles to know your options reg. optimus systems.

Thanks for your answer, but I have a few doubts about it. With the configlet, do you mean the files inside the xorg.conf.d directory? and is it sufficient to remove the xf86-video-intel package
to active the modesetting?. Sorry for the doubts but I am new configuring this kind of thing.

Last edited by hmors (2018-07-05 22:20:14)

Offline

#20 2018-07-05 22:07:21

seth
Member
Registered: 2012-09-03
Posts: 8,663

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

You *are* on modesetting and loqs idea was to try whether the intel ddx driver performs better.
About the configlet: yes, just "grep -r modesetting /etc/X11/xorg.conf.d/ /usr/share/X11/xorg.conf.d" - iirc the nvidia-utils package installs /usr/share/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf which might be prone to do this.

Btw, OT: I doubt that you've "doubts" but rather "questions" or maybe "uncertainties" ;-)

Offline

#21 2018-07-05 23:06:38

hmors
Member
Registered: 2018-07-04
Posts: 13

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

You are right, I have the /usr/share/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf file. And the new  "question" [ ;-) ] is, what should I do with this file, should I delete it?

Offline

#22 2018-07-05 23:22:09

seth
Member
Registered: 2012-09-03
Posts: 8,663

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

Briefly edit it, replace "modesetting" with "intel", restart the X11 server and see whether that has a positive impact on the performace.
(Also check the xorg log to ensure the intel driver is actually used now)

Offline

#23 2018-07-06 00:11:19

hmors
Member
Registered: 2018-07-04
Posts: 13

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

Thank you, I think everything is working now

Offline

#24 2018-07-06 05:28:44

seth
Member
Registered: 2012-09-03
Posts: 8,663

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

The question was, whether it has positive performance impact.
If you think so, you should add some configlet in /etc/X11/xorg.conf.d/10-force_intel.conf to override the configlet it /usr/share/… because the latter will likely get overridden with the next update (or you could take that incident as reminder for an updated test of the modesetting driver)

Please always remember to mark resolved threads by editing your initial posts subject - so others will know that there's no task left, but maybe a solution to find.
Thanks.

Offline

#25 2018-07-09 14:40:22

hmors
Member
Registered: 2018-07-04
Posts: 13

Re: [Solved] cinnamon does not start (Segmentation fault (core dumped))

Hi, I am sorry for the delay in the answer. I have been using the modesetting and intel drivers and now I think both have a good performance. Actually, the Xorg.0.log shows that the system loads first the modesettings driver and then loads the intel driver, for the modeseetings case, and inversely for the case of the intel case, i.e. first intel driver and then modesetting; I'm not sure if this the correct behaviour but so far I am comfortable with the performance.
So in order to prevent the file from being overwritten I going to keep the modesetting option in the configuration file.  Thank you for all your help.

Last edited by hmors (2018-07-09 20:57:57)

Offline

Board footer

Powered by FluxBB