You are not logged in.

#1 2018-11-26 10:07:50

quequotion
Member
From: Oita, Japan
Registered: 2013-07-29
Posts: 657
Website

[SOLVED] Crippling performance and usability issues with linux 4.19.x

Yesterday I woke up to a very bad situation.

Finding the system nearly unusable, on instinct, I tried rolling back the kernel. Luckily 4.18.16 was still in pacman's package cache and rolling back did restore functionality.

Today I tried some other versions of the 4.19.x series. I experienced the same issues with the mainline kernel, linux-zen, and linux-ck-sandybridge (from repo-ck).

The performance degradation leads me to think it might be some kind of memory leak, but I am not using rtlwifi. I am also aware that 4.19.x is known to have reduced performance due to Spectre mitigations, but my case seems much more severe than what could be expected. I could use some help understanding what might be wrong here.

Note, it is difficult for me to provide technical details from the system while running with one of these kernels because:

1. Web browsers are unable to retrieve http data (this forum is inaccessible).
2. Any attempt to acquire SUID silently stalls forever (administrative actions and access are impossible)
3. Many programs do not run or run very slowly (top, for example, silently stalls forever)

Although TTYs never load, It is possible to get to a terminal by logging in to openbox and opening a graphical one, but it takes a very long time (there is a two minute delay between when lightdm is started and when its login prompt appears, a ten minute delay between entering the login name and password and when the desktop session initiates, and then subsequently run programs--such as the graphical terminal--are also very slow), and the system cannot be shutdown except by holding the power button on the case until it cuts out.

If there's something you would like to know about the system that I have to go in using a 4.19.x kernel to get, please consider that it may take a while for me to provide it, and that it comes at a risk to my hard drives.

I'll try to post every {kernel,module,hardware}-relevant technical detail I am aware of. Note that these configuration files and loaded modules represent the system in a functional state while running the 4.18.16 kernel, and that I have three third-party modules: vhba, earth_pt3, and nvidia{,_*}. These are the modules and configuration I intend to use with 4.19.x.

lsmod

dm_crypt               45056  1
algif_skcipher         16384  0
af_alg                 28672  1 algif_skcipher
dm_mod                155648  3 dm_crypt
isofs                  45056  1
rfcomm                 86016  4
fuse                  118784  3
bnep                   24576  2
nct6775                65536  0
hwmon_vid              16384  1 nct6775
nls_iso8859_1          16384  1
nls_cp437              20480  1
vfat                   24576  1
fat                    81920  1 vfat
altera_cvp             16384  0
fpga_mgr               16384  1 altera_cvp
intel_rapl             24576  0
x86_pkg_temp_thermal    16384  0
intel_powerclamp       16384  0
coretemp               16384  0
input_leds             16384  0
mousedev               24576  0
kvm_intel             233472  0
mxl301rf               16384  2
iTCO_wdt               16384  0
qm1d1c0042             16384  2
snd_hda_codec_realtek   110592  1
snd_hda_codec_generic    86016  1 snd_hda_codec_realtek
kvm                   737280  1 kvm_intel
iTCO_vendor_support    16384  1 iTCO_wdt
tc90522                20480  4
btusb                  53248  0
earth_pt3              28672  0
crct10dif_pclmul       16384  0
snd_hda_intel          45056  2
snd_hda_codec         151552  3 snd_hda_codec_generic,snd_hda_intel,snd_hda_codec_realtek
crc32_pclmul           16384  0
ghash_clmulni_intel    16384  0
pcbc                   16384  0
gpio_ich               16384  0
snd_hda_core           94208  4 snd_hda_codec_generic,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
dvb_core              159744  2 tc90522,earth_pt3
videobuf2_vmalloc      16384  1 dvb_core
mxm_wmi                16384  0
aesni_intel           200704  2
btrtl                  16384  1 btusb
aes_x86_64             20480  1 aesni_intel
btbcm                  16384  1 btusb
btintel                24576  1 btusb
videobuf2_memops       16384  1 videobuf2_vmalloc
crypto_simd            16384  1 aesni_intel
cryptd                 28672  4 crypto_simd,ghash_clmulni_intel,aesni_intel
glue_helper            16384  1 aesni_intel
bluetooth             638976  27 btrtl,btintel,btbcm,bnep,btusb,rfcomm
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               131072  3 snd_hda_intel,snd_hda_codec,snd_hda_core
videobuf2_common       53248  1 dvb_core
intel_cstate           16384  0
intel_uncore          135168  0
hid_logitech_hidpp     40960  0
ecdh_generic           24576  1 bluetooth
joydev                 24576  0
rfkill                 28672  3 bluetooth
evdev                  20480  10
videodev              212992  1 videobuf2_common
tg3                   184320  0
intel_rapl_perf        16384  0
snd_timer              36864  1 snd_pcm
snd                    98304  11 snd_hda_codec_generic,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm
media                  45056  1 videodev
libphy                 77824  1 tg3
soundcore              16384  1 snd
mei_me                 45056  0
mei                   106496  1 mei_me
i2c_i801               32768  0
mac_hid                16384  0
intel_smartconnect     16384  0
pcc_cpufreq            16384  0
lpc_ich                28672  0
wmi                    28672  1 mxm_wmi
msr                    16384  0
sg                     40960  0
vhba                   20480  0
crypto_user            16384  0
ip_tables              28672  0
x_tables               45056  1 ip_tables
sr_mod                 28672  1
sd_mod                 61440  6
cdrom                  69632  1 sr_mod
hid_sony               32768  0
ff_memless             16384  1 hid_sony
led_class              16384  2 input_leds,hid_sony
ahci                   40960  10
libahci                40960  1 ahci
libata                278528  2 libahci,ahci
hid_logitech_dj        24576  0
uas                    28672  0
usb_storage            69632  1 uas
scsi_mod              258048  7 vhba,sd_mod,usb_storage,uas,libata,sg,sr_mod
nvidia_drm             49152  4
drm_kms_helper        200704  1 nvidia_drm
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
drm                   479232  7 drm_kms_helper,nvidia_drm
agpgart                49152  1 drm
nvidia_uvm            913408  0
nvidia_modeset       1036288  7 nvidia_drm
nvidia              17281024  261 nvidia_uvm,nvidia_modeset
ipmi_devintf           20480  0
ipmi_msghandler        65536  2 ipmi_devintf,nvidia
ext4                  737280  2
crc32c_generic         16384  0
crc32c_intel           24576  2
crc16                  16384  2 bluetooth,ext4
mbcache                16384  1 ext4
jbd2                  126976  1 ext4
fscrypto               32768  1 ext4
raid0                  20480  1
md_mod                167936  4 raid0

lspci

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b5)
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation Z68 Express Chipset LPC Controller (rev 05)
00:1f.2 RAID bus controller: Intel Corporation SATA Controller [RAID mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation GK208 [GeForce GT 630 Rev. 2] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GK208 HDMI/DP Audio Controller (rev a1)
03:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9120 SATA 6Gb/s Controller (rev 12)
04:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
05:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
06:00.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
07:01.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
07:04.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
07:05.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
07:06.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
07:07.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
07:08.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
07:09.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
08:00.0 Multimedia controller: Altera Corporation Device 4c15 (rev 01)
0c:00.0 Ethernet controller: Broadcom Inc. and subsidiaries NetLink BCM57781 Gigabit Ethernet PCIe (rev 10)

lscpu

Architecture:         x86_64
CPU op-mode(s):       32-bit, 64-bit
Byte Order:           Little Endian
Address sizes:        36 bits physical, 48 bits virtual
CPU(s):               8
On-line CPU(s) list:  0-3
Off-line CPU(s) list: 4-7
Thread(s) per core:   1
Core(s) per socket:   4
Socket(s):            1
NUMA node(s):         1
Vendor ID:            GenuineIntel
CPU family:           6
Model:                42
Model name:           Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz
Stepping:             7
CPU MHz:              1596.273
CPU max MHz:          5900.0000
CPU min MHz:          1600.0000
BogoMIPS:             6986.66
Virtualization:       VT-x
L1d cache:            32K
L1i cache:            32K
L2 cache:             256K
L3 cache:             8192K
NUMA node0 CPU(s):    0-3
Flags:                fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx lahf_lm epb pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid xsaveopt dtherm ida arat pln pts flush_l1d

lsblk

NAME                                          MAJ:MIN RM   SIZE RO TYPE  MOUNTPOINT
sda                                             8:0    0 465.8G  0 disk  
└─md126                                         9:126  0   1.8T  0 raid0 
  ├─md126p1                                   259:0    0   488M  0 part  /boot
  └─md126p2                                   259:1    0   1.8T  0 part  /
sdb                                             8:16   0 465.8G  0 disk  
└─md126                                         9:126  0   1.8T  0 raid0 
  ├─md126p1                                   259:0    0   488M  0 part  /boot
  └─md126p2                                   259:1    0   1.8T  0 part  /
sdc                                             8:32   0 465.8G  0 disk  
└─md126                                         9:126  0   1.8T  0 raid0 
  ├─md126p1                                   259:0    0   488M  0 part  /boot
  └─md126p2                                   259:1    0   1.8T  0 part  /
sdd                                             8:48   0 465.8G  0 disk  
└─md126                                         9:126  0   1.8T  0 raid0 
  ├─md126p1                                   259:0    0   488M  0 part  /boot
  └─md126p2                                   259:1    0   1.8T  0 part  /
sde                                             8:64   1   1.8T  0 disk  
└─sde1                                          8:65   1   1.8T  0 part  
  └─luks-2b21cdb0-44d1-4bf3-8dcc-e9e98ed07f1f 253:0    0   1.8T  0 crypt /run/media/$USER/4805f9a5-55be-4996-9e9a-8577f368aaaf
sr0                                            11:0    1   578M  0 rom 

lsmem

RANGE                                  SIZE  STATE REMOVABLE   BLOCK
0x0000000000000000-0x000000000fffffff  256M online        no     0-1
0x0000000010000000-0x0000000077ffffff  1.6G online       yes    2-14
0x0000000078000000-0x000000007fffffff  128M online        no      15
0x0000000080000000-0x00000000d7ffffff  1.4G online       yes   16-26
0x00000000d8000000-0x00000000dfffffff  128M online        no      27
0x0000000100000000-0x000000024fffffff  5.3G online       yes   32-73
0x0000000250000000-0x0000000257ffffff  128M online        no      74
0x0000000258000000-0x00000002ffffffff  2.6G online       yes   75-95
0x0000000300000000-0x000000033fffffff    1G online        no  96-103
0x0000000340000000-0x0000000347ffffff  128M online       yes     104
0x0000000348000000-0x0000000367ffffff  512M online        no 105-108
0x0000000368000000-0x0000000377ffffff  256M online       yes 109-110
0x0000000378000000-0x0000000387ffffff  256M online        no 111-112
0x0000000388000000-0x000000038fffffff  128M online       yes     113
0x0000000390000000-0x00000003b7ffffff  640M online        no 114-118
0x00000003b8000000-0x00000003bfffffff  128M online       yes     119
0x00000003c0000000-0x00000003c7ffffff  128M online        no     120
0x00000003c8000000-0x00000003cfffffff  128M online       yes     121
0x00000003d0000000-0x00000003e7ffffff  384M online        no 122-124
0x00000003e8000000-0x00000003f7ffffff  256M online       yes 125-126
0x00000003f8000000-0x000000041fffffff  640M online        no 127-131

Memory block size:       128M
Total online memory:      16G
Total offline memory:      0B

/boot/loader/entries/arch.conf

title   Arch Linux
linux   /vmlinuz-linux
initrd  /intel-ucode.img
initrd  /initramfs-linux.img
options root=PARTUUID=0b60bb47-7bfa-4743-a9ab-4911f1cec7f3 rootfstype=ext4 rootflags=rw,nodiratime,relatime,journal_checksum,journal_async_commit,commit=60,max_batch_time=30000,stripe=128,data=writeback,inode_readahead_blks=64 resume=PARTUUID=0b60bb47-7bfa-4743-a9ab-4911f1cec7f3 resume_offset=2164736 add_efi_memmap rw quiet loglevel=3 rd.systemd.show_status=auto rd.udev.log_priority=3 vga=current nvidia-drm.modeset=1 vt.global_cursor_default=0 fsck.repair=preen

/etc/fstab

# Static information about the filesystems.
# See fstab(5) for details.

# <file system> <dir> <type> <options> <dump> <pass>
# /dev/md126p2 LABEL=root
#UUID=9d277694-5d6f-4d76-90c7-1c15eebdc0a3	/         	ext4      	rw,nodiratime,relatime,journal_checksum,journal_async_commit,commit=60,max_batch_time=30000,stripe=128,data=writeback,inode_readahead_blks=64	0 1

# /dev/md126p1 LABEL=ESP
UUID=4876-3A72      	/boot     	vfat      	rw,noatime,nodiratime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro	0 2

# Resume swap
/resume.swp none swap defaults 0 0

/etc/mkinitcpio.conf

# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run.  Advanced users may wish to specify all system modules
# in this array.  For instance:
#     MODULES=(piix ide_disk reiserfs)
MODULES=(raid0 ext4 nvidia nvidia_modeset nvidia_uvm nvidia_drm)

# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image.  This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=()

# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way.  This is useful for config files.
FILES=()

# HOOKS
# This is the most important setting in this file.  The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
##   This setup specifies all modules in the MODULES setting above.
##   No raid, lvm2, or encrypted root is needed.
#    HOOKS=(base)
#
##   This setup will autodetect all modules for your system and should
##   work as a sane default
#    HOOKS=(base udev autodetect block filesystems)
#
##   This setup will generate a 'full' image which supports most systems.
##   No autodetection is done.
#    HOOKS=(base udev block filesystems)
#
##   This setup assembles a pata mdadm array with an encrypted root FS.
##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
#    HOOKS=(base udev block mdadm encrypt filesystems)
#
##   This setup loads an lvm2 volume group on a usb device.
#    HOOKS=(base udev block lvm2 filesystems)
#
##   NOTE: If you have /usr on a separate partition, you MUST include the
#    usr, fsck and shutdown hooks.
HOOKS=(base udev resume autodetect modconf block mdadm_udev fsck filesystems keyboard keymap)

# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"

# COMPRESSION_OPTIONS
# Additional options for the compressor
COMPRESSION_OPTIONS=(-9)

/etc/mkinitcpio.d/linux.preset

# mkinitcpio preset file for the 'linux' package

ALL_config="/etc/mkinitcpio.conf"
ALL_kver="/boot/vmlinuz-linux"

PRESETS=('default' 'fallback')

#default_config="/etc/mkinitcpio.conf"
default_image="/boot/initramfs-linux.img"
#default_options=""

#fallback_config="/etc/mkinitcpio.conf"
fallback_image="/boot/initramfs-linux-fallback.img"
fallback_options="-S autodetect"

/etc/sysctl.d/*.conf

vm.swappiness=0
vm.laptop_mode=5
vm.dirty_writeback_centisecs=6000
vm.dirty_expire_centisecs=6000
kernel.printk = 3 3 3 3
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 =1
kernel.nmi_watchdog = 0
vm.laptop_mode = 5

/etc/modprobe.d/*.conf

options snd_hda_intel enable_msi=1 enable=1,0
blacklist snd-emu10k1
install snd-hda-codec-hdmi /bin/false
blacklist snd-hda-codec-hdmi
blacklist snd-hda-codec-nvhdmi
blacklist pcspkr

/etc/modules-load.d/*.conf

msr

/etc/udev/rules.d/*.rules

ACTION=="add|change", SUBSYSTEM=="block", TEST=="bdi/read_ahead_kb", ATTR{bdi/read_ahead_kb}="65536"
# Set bluetooth power on
#ACTION=="add", KERNEL=="hci0", RUN+="/usr/bin/hciconfig %k up"
#KERNEL=="hci[0-9]*", SUBSYSTEM=="bluetooth", RUN+="/usr/bin/hciconfig hci0 up"
ACTION=="add", SUBSYSTEM=="hci[0-9]", RUN+="/usr/bin/btmgmt --index %k power on"
ACTION=="add", KERNEL=="*sony[1-4]", SUBSYSTEM=="leds" RUN+="/usr/bin/chmod go+w /sys/class/leds/%k/brightness"
## Throttle - Runtime management udev rules.
## Whitelisted Actions
ACTION!="add", GOTO="runtime_pm_rules_end"

## Blacklisted Devices (USB Keyboard/Mouse, etc.)
# Logitec Unifying Reciever (occasionally disabled ?)
ATTR{idVendor}=="046d", ATTR{idProduct}=="c52b", GOTO="runtime_pm_rules_end"
# Standard Microsystems Corp. 2 Port Hub (doesn't charge with runtime pm ?)
ATTR{idVendor}=="0424", ATTR{idProduct}=="a700", GOTO="runtime_pm_rules_end"
# Charge Sixaxis/Dualshock 3 (disconnect or charge too slowly with runtime pm ?)
ATTR{idVendor}=="054c", ATTR{idProduct}=="0268", GOTO="runtime_pm_rules_end"

# Asynchronous power transitions
SUBSYSTEMS=="*", TEST=="power/async", ATTR{power/async}="enabled"

# Backlight
SUBSYSTEM=="backlight", TEST=="brightness", ATTR{brightness}="0"

# Hard disk power saving
SUBSYSTEM=="scsi_host", KERNEL=="host*", TEST=="link_power_management_policy", ATTR{link_power_management_policy}="min_power"
KERNEL=="[hs]d[a-z]", TEST=="queue/rotational", ATTR{queue/rotational}=="1", RUN+="/usr/bin/hdparm -B 1 -M 128 /dev/%k"

# Various subsystems runtime power management
SUBSYSTEMS=="*", TEST=="power/control", ATTR{power/control}="auto"

# USB autosuspend devices after 1 sec (may disable some old devices!)
SUBSYSTEM=="usb", TEST=="power/autosuspend", ATTR{power/autosuspend}="1"
SUBSYSTEM=="usb", TEST=="power/autosuspend_delay_ms", ATTR{power/autosuspend_delay_ms}="1"

# Various subsystems power saving
SUBSYSTEMS=="*", TEST=="parameters/power_save", ATTR{parameters/power_save}="1"
SUBSYSTEMS=="*", TEST=="parameters/power_save_controller", ATTR{parameters/power_save_controller}="Y"

# D3 Cold Blanket
DRIVER=="*", TEST=="d3cold_allowed", ATTR{d3cold_allowed}=="0", ATTR{d3cold_allowed}="1"

# Network Powersaving
SUBSYSTEM=="net", KERNEL=="wl*", RUN+="/usr/bin/iw dev %k set power_save on"
SUBSYSTEM=="net", KERNEL=="e*", RUN+="/usr/sbin/ethtool -s %k wol d"
SUBSYSTEM=="net", TEST=="device/power/wakeup", ATTR{device/power/wakeup}="disabled"

# Reduce LED Brightness
SUBSYSTEM=="leds", TEST=="brightness", ATTR{brightness}="0"

# Exit
LABEL="runtime_pm_rules_end"
#  utsushi-esci.rules -- bring up supported devices as scanners
#  Copyright (C) 2012-2016  SEIKO EPSON CORPORATION
#
#  License: GPL-3.0+
#  Author : EPSON AVASYS CORPORATION
#
#  This file is part of the 'Utsushi' package.
#  This package is free software: you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation, either version 3 of the License or, at
#  your option, any later version.
#
#    This program is distributed in the hope that it will be useful,
#    but WITHOUT ANY WARRANTY; without even the implied warranty of
#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#    GNU General Public License for more details.
#
#  You ought to have received a copy of the GNU General Public License
#  along with this package.  If not, see <http://www.gnu.org/licenses/>.

# ACTION!="add|bind", GOTO="utsushi_esci_rules_end"
ENV{DEVTYPE}!="usb_device", GOTO="utsushi_esci_rules_end"
ATTR{idVendor}!="04b8", GOTO="utsushi_esci_rules_end"

LABEL="utsushi_esci_rules_begin"

ATTRS{idProduct}=="0145", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="0146", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="014c", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="014d", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="0150", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="0152", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="0154", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="0155", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="0156", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="0157", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="0159", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="015a", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="015c", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="015d", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="015e", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="015f", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="0160", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="0162", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="0163", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="0164", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="0165", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="0166", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="0167", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="0168", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="0169", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="016b", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="016c", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="016e", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="0176", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="0177", ENV{utsushi_driver}="esci"

ATTRS{idProduct}=="08bc", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="08c0", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="08c2", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="08cc", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="08cd", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="08ce", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="08cf", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="08d1", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="08d2", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="08d3", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1101", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1102", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1103", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1104", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1105", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1106", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1107", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1108", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1109", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="110a", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="110b", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="110c", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="110d", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="110f", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1112", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1113", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1114", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1115", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1116", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1117", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1118", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1119", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="111a", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="111b", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="111c", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="111d", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="111e", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="111f", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1120", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1121", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1122", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1123", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1125", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1126", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1127", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1128", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1129", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="112a", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="112b", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="112c", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="112d", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="112e", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="112f", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1130", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1131", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1132", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1133", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1134", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1135", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1139", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="113a", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="113b", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="113c", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="113d", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="113e", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="113f", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1140", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1141", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1142", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1143", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1145", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1146", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1147", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1148", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1149", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="114a", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="114b", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="114c", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="114d", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="114f", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1150", ENV{utsushi_driver}="esci"
ATTRS{idProduct}=="1151", ENV{utsushi_driver}="esci"

ATTRS{idProduct}=="013c", ENV{utsushi_driver}="esci:gt-s650", ENV{firmware_file}="esfw010c.bin"
ATTRS{idProduct}=="013d", ENV{utsushi_driver}="esci:gt-s650", ENV{firmware_file}="esfw010c.bin"

#  Give scanner users read/write permissions on the device.
ENV{utsushi_driver}=="esci*", MODE="0666", OWNER="root", GROUP="root"

#  Device detection by libutsushi depends on libsane_matched being set.
ENV{utsushi_driver}=="esci*", ENV{libsane_matched}="yes"

LABEL="utsushi_esci_rules_end"

/etc/X11/xorg.conf.d/*.conf

Section "Device"
    Identifier     "Nvidia GPU"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GK208 [GeForce GT 630 Rev. 2] (rev a1)"
    Option         "CoolBits" "24"
EndSection
Section "Screen"
    Identifier     "Mirror"
    Device         "Nvidia GPU"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "CRT-0"
    Option         "metamodes" "HDMI-0: 1920x1080_60i +0+0 {viewportin=1920x1080, viewportout=1813x1020+54+30, ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}, DVI-D-0: 1920x1080_60 +0+0 {ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Mirror" 0 0
    Option         "Xinerama" "0"
    Option         "BlankTime" "0"
    Option         "StandbyTime" "0"
    Option         "SuspendTime" "0"
    Option         "OffTime" "0"
EndSection

Last edited by quequotion (2018-11-29 08:10:20)

Offline

#2 2018-11-26 13:17:45

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 6,429

Re: [SOLVED] Crippling performance and usability issues with linux 4.19.x

Looks like you boot to graphical.target ?

If so, have you tried booting 4.19.x to multi-user.target or one of the recovery shells ?

Last edited by Lone_Wolf (2018-11-26 13:18:59)


Multi-init booting with apg Openrc and systemd coexisting
Automounting : not needed, i prefer pmount
Aur helpers : makepkg + my own local repo === rarely need them

Offline

#3 2018-11-26 14:51:20

seth
Member
Registered: 2012-09-03
Posts: 8,951

Re: [SOLVED] Crippling performance and usability issues with linux 4.19.x

Skip of all of these:

vm.swappiness=0
vm.laptop_mode=5
vm.dirty_writeback_centisecs=6000
vm.dirty_expire_centisecs=6000
vm.laptop_mode = 5

Fwwi, what do you *think* "vm.swappiness=0" does?

Offline

#4 2018-11-26 15:51:56

quequotion
Member
From: Oita, Japan
Registered: 2013-07-29
Posts: 657
Website

Re: [SOLVED] Crippling performance and usability issues with linux 4.19.x

seth wrote:

what do you *think* "vm.swappiness=0" does?

It disables swapping entirely; I have 16GB of memory and I don't usually do anything that makes use of it all. Although the amount of free memory is theoretically sufficient to make swapping unnecessary, I do this to ensure fewer hard disk reads and writes in case the kernel were to attempt to swap anyway (I have the impression it occasionally will with any higher setting). All of these are measures to reduce hard disk access.

Could 4.19.x really be incompatible with these settings? Also, what does 'fwwi' stand for?

Lone_Wolf wrote:

Looks like you boot to graphical.target ?

I've never changed the default, so apparently that is so.

have you tried booting 4.19.x to multi-user.target or one of the recovery shells ?

I'll give it a shot, and come back to edit this post with results.

EDIT: Initial attempt at multi-user.target produced a login prompt on tty1, but entering a username and password stalled until it "timed out after 60 seconds" and then stalled forever. As with graphical.target, no other TTYs would open; system had to be shut down by holding the button on the case until the power cut out.

Before I get around to the recovery console, I'm going to try seth and V1del's suggestions. I don't expect to have much to do at the recovery console actually; nothing really seems to be broken so much as everything seems to be stuck in some kind of digital mud.

Last edited by quequotion (2018-11-26 18:06:04)

Offline

#5 2018-11-26 16:01:48

seth
Member
Registered: 2012-09-03
Posts: 8,951

Re: [SOLVED] Crippling performance and usability issues with linux 4.19.x

Thought as much. "No, doesn't. Common misconception."
It will aggressively prefer dropping file caches and "0" is a particularily risky value provoking thrashing in OOM conditions (so risky in fact that it gets special cased by the VM) - in general: "don't".

I doubt there's "incompatibility" but your description sounds like an IO issue and the settings are related, so there might be unexpected effects by one of them and I'd rule that out.
Also check what modules are actually loaded but your scenario doesn't sound like eg. nouveau instead of nvidia.

Offline

#6 2018-11-26 16:42:07

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 5,714

Re: [SOLVED] Crippling performance and usability issues with linux 4.19.x

Might also be an issue with the default switch to multiqueue and your drives having an issue with that, what happens if you boot with

scsi_mod.use_blk_mq=0

?

Offline

#7 2018-11-26 18:42:29

quequotion
Member
From: Oita, Japan
Registered: 2013-07-29
Posts: 657
Website

Re: [SOLVED] Crippling performance and usability issues with linux 4.19.x

seth wrote:

Thought as much. "No, doesn't. Common misconception."

Interesting. Most search results back up the "misconception" and almost every result to the contrary is particularly about MySQL getting killed in near-OOM conditions after the change was merged into RHEL's 2.6.32-303 kernel. I did find this discussion and this blog post that reveal more detail.

I don't think it's possible that I'm running out of memory before loading the desktop (slowdown starting in lightdm or earlier), but it is possible the system is responding badly to a spike in memory usage during the boot process.

Although I've never had a problem and have used this setting for years, I'll give vm.swappiness=1 a try and come back to edit this post with the results.

EDIT: vm.swappiness=1 changed nothing, but after reading that discussion I am tempted to unset this altogether (and spam every how-to on the internet recommending vm.swappiness=0 with a link to it). So, years ago, the nuance of "swappiness" changed from 'amount of' to 'nature of'; good to know. Not sure this will resolve the trouble I'm having; I don't see the HDD light blinking much while things are slow. If thrashing is happening, it isn't happening on disk. I'll try V1del's suggestion next, and then without any vm settings if that fails.

Also check what modules are actually loaded but your scenario doesn't sound like eg. nouveau instead of nvidia.

I do think the nvidia drivers loaded, or x wouldn't have started at all (unless it has become capable of ignoring config files when their specified drivers are not available; in the past I have known that situation to prevent x from starting). I'm going to put this check off for a while because it means going into a desktop session with no way out.

V1del wrote:

what happens if you boot with

scsi_mod.use_blk_mq=0

?

I'll give it a try and edit this post with the results.
EDIT: No change.

Last edited by quequotion (2018-11-28 13:48:16)

Offline

#8 2018-11-26 18:53:27

seth
Member
Registered: 2012-09-03
Posts: 8,951

Re: [SOLVED] Crippling performance and usability issues with linux 4.19.x

We had a discussion on this, https://bbs.archlinux.org/viewtopic.php?id=231265 has also some further links.
If you want to totally prevent swap usage, don't have a swap device.
Swap isn't invoked unless you run (near) OOM, where "OOM" includes memory used by file caches, so by lowering the swappiness, you will reduce swapping out, but provoke re-reading files. There are benefits to this depending on the swap/file device type (because of the nature of the data and the performance of linear ./. random reads as well as asymmetric read/write performance) but they're complex and strictly depend on the actual HW and usecase, so you've to measure setups.
As a rule of thumb: lowering swappiness might be beneficial on *dumb* NAND devices (SD-cards, usb keys) as swap device, not because of performance, but to prevent writes on a limited cluster set. (This does NOT hold for SSDs!)

Offline

#9 2018-11-29 07:52:00

quequotion
Member
From: Oita, Japan
Registered: 2013-07-29
Posts: 657
Website

Re: [SOLVED] Crippling performance and usability issues with linux 4.19.x

Late yesterday night, I was finally able to get some log information from the running system (just had to wait long, long time for output); sorry for the delay in posting this, I spent most of yesterday taking care of other things:
journalctl -xe

-- Logs begin at Fri 2018-01-26 19:59:45 JST, end at Tue 2018-11-27 22:19:58 JST. --
Nov 27 22:19:46 Shiroko kernel: pci 0000:03:00.0: PME# supported from D3hot
Nov 27 22:19:46 Shiroko kernel: pci 0000:03:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x1 link at 0000:00:1c.4 (capable of 7.876 Gb/s with 8 GT/s x1 link)
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.4: PCI bridge to [bus 03]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.4:   bridge window [mem 0xf7500000-0xf75fffff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330
Nov 27 22:19:46 Shiroko kernel: pci 0000:04:00.0: reg 0x10: [mem 0xf7400000-0xf7407fff 64bit]
Nov 27 22:19:46 Shiroko kernel: pci 0000:04:00.0: enabling Extended Tags
Nov 27 22:19:46 Shiroko kernel: pci 0000:04:00.0: supports D1 D2
Nov 27 22:19:46 Shiroko kernel: pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 27 22:19:46 Shiroko kernel: pci 0000:04:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x1 link at 0000:00:1c.5 (capable of 7.876 Gb/s with 8 GT/s x1 link)
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.5: PCI bridge to [bus 04]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.5:   bridge window [mem 0xf7400000-0xf74fffff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:05:00.0: [1b6f:7023] type 00 class 0x0c0330
Nov 27 22:19:46 Shiroko kernel: pci 0000:05:00.0: reg 0x10: [mem 0xf7300000-0xf7307fff 64bit]
Nov 27 22:19:46 Shiroko kernel: pci 0000:05:00.0: enabling Extended Tags
Nov 27 22:19:46 Shiroko kernel: pci 0000:05:00.0: supports D1 D2
Nov 27 22:19:46 Shiroko kernel: pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 27 22:19:46 Shiroko kernel: pci 0000:05:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x1 link at 0000:00:1c.6 (capable of 7.876 Gb/s with 8 GT/s x1 link)
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.6: PCI bridge to [bus 05]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.6:   bridge window [mem 0xf7300000-0xf73fffff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:06:00.0: [10b5:8608] type 01 class 0x060400
Nov 27 22:19:46 Shiroko kernel: pci 0000:06:00.0: reg 0x10: [mem 0xf7200000-0xf721ffff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
Nov 27 22:19:46 Shiroko kernel: pci 0000:06:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x1 link at 0000:00:1c.7 (capable of 7.876 Gb/s with 8 GT/s x1 link)
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.7: PCI bridge to [bus 06-0f]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.7:   bridge window [mem 0xf7100000-0xf72fffff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.7:   bridge window [mem 0xec000000-0xf01fffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:01.0: [10b5:8608] type 01 class 0x060400
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:04.0: [10b5:8608] type 01 class 0x060400
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:04.0: PME# supported from D0 D3hot D3cold
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:05.0: [10b5:8608] type 01 class 0x060400
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:05.0: PME# supported from D0 D3hot D3cold
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:06.0: [10b5:8608] type 01 class 0x060400
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:06.0: PME# supported from D0 D3hot D3cold
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:07.0: [10b5:8608] type 01 class 0x060400
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:07.0: PME# supported from D0 D3hot D3cold
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:08.0: [10b5:8608] type 01 class 0x060400
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:08.0: PME# supported from D0 D3hot D3cold
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:09.0: [10b5:8608] type 01 class 0x060400
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:09.0: PME# supported from D0 D3hot D3cold
Nov 27 22:19:46 Shiroko kernel: pci 0000:06:00.0: PCI bridge to [bus 07-0f]
Nov 27 22:19:46 Shiroko kernel: pci 0000:06:00.0:   bridge window [mem 0xf7100000-0xf71fffff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:06:00.0:   bridge window [mem 0xec000000-0xf01fffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci 0000:08:00.0: [1172:4c15] type 00 class 0x048000
Nov 27 22:19:46 Shiroko kernel: pci 0000:08:00.0: reg 0x10: [mem 0xf0101000-0xf0101fff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci 0000:08:00.0: reg 0x18: [mem 0xf0100000-0xf0100fff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci 0000:08:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:07:01.0 (capable of 7.876 Gb/s with 8 GT/s x1 link)
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:01.0: PCI bridge to [bus 08]
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:01.0:   bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci 0000:09:00.0: [1b21:1080] type 01 class 0x060401
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:04.0: PCI bridge to [bus 09-0a]
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:04.0:   bridge window [mem 0xec000000-0xefffffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:0a: extended config space not accessible
Nov 27 22:19:46 Shiroko kernel: pci 0000:0a:00.0: [4444:0016] type 00 class 0x040000
Nov 27 22:19:46 Shiroko kernel: pci 0000:0a:00.0: reg 0x10: [mem 0xec000000-0xefffffff pref]
Nov 27 22:19:46 Shiroko kernel: pci 0000:09:00.0: PCI bridge to [bus 0a] (subtractive decode)
Nov 27 22:19:46 Shiroko kernel: pci 0000:09:00.0:   bridge window [mem 0xec000000-0xefffffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci 0000:09:00.0:   bridge window [mem 0xec000000-0xefffffff 64bit pref] (subtractive decode)
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:05.0: PCI bridge to [bus 0b]
Nov 27 22:19:46 Shiroko kernel: pci 0000:0c:00.0: [14e4:16b1] type 00 class 0x020000
Nov 27 22:19:46 Shiroko kernel: pci 0000:0c:00.0: reg 0x10: [mem 0xf0010000-0xf001ffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci 0000:0c:00.0: reg 0x18: [mem 0xf0000000-0xf000ffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci 0000:0c:00.0: reg 0x30: [mem 0xf7100000-0xf71007ff pref]
Nov 27 22:19:46 Shiroko kernel: pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
Nov 27 22:19:46 Shiroko kernel: pci 0000:0c:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:07:06.0 (capable of 7.876 Gb/s with 8 GT/s x1 link)
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:06.0: PCI bridge to [bus 0c]
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:06.0:   bridge window [mem 0xf7100000-0xf71fffff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:06.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:07.0: PCI bridge to [bus 0d]
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:08.0: PCI bridge to [bus 0e]
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:09.0: PCI bridge to [bus 0f]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:00: on NUMA node 0
Nov 27 22:19:46 Shiroko kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
Nov 27 22:19:46 Shiroko kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
Nov 27 22:19:46 Shiroko kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
Nov 27 22:19:46 Shiroko kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
Nov 27 22:19:46 Shiroko kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Nov 27 22:19:46 Shiroko kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Nov 27 22:19:46 Shiroko kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)
Nov 27 22:19:46 Shiroko kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
Nov 27 22:19:46 Shiroko kernel: pci 0000:01:00.0: vgaarb: setting as boot VGA device
Nov 27 22:19:46 Shiroko kernel: pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
Nov 27 22:19:46 Shiroko kernel: pci 0000:01:00.0: vgaarb: bridge control possible
Nov 27 22:19:46 Shiroko kernel: vgaarb: loaded
Nov 27 22:19:46 Shiroko kernel: ACPI: bus type USB registered
Nov 27 22:19:46 Shiroko kernel: usbcore: registered new interface driver usbfs
Nov 27 22:19:46 Shiroko kernel: usbcore: registered new interface driver hub
Nov 27 22:19:46 Shiroko kernel: usbcore: registered new device driver usb
Nov 27 22:19:46 Shiroko kernel: pps_core: LinuxPPS API ver. 1 registered
Nov 27 22:19:46 Shiroko kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Nov 27 22:19:46 Shiroko kernel: PTP clock support registered
Nov 27 22:19:46 Shiroko kernel: EDAC MC: Ver: 3.0.0
Nov 27 22:19:46 Shiroko kernel: Registered efivars operations
Nov 27 22:19:46 Shiroko kernel: PCI: Using ACPI for IRQ routing
Nov 27 22:19:46 Shiroko kernel: PCI: pci_cache_line_size set to 64 bytes
Nov 27 22:19:46 Shiroko kernel: e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
Nov 27 22:19:46 Shiroko kernel: e820: reserve RAM buffer [mem 0x09e21018-0x0bffffff]
Nov 27 22:19:46 Shiroko kernel: e820: reserve RAM buffer [mem 0x09ea6018-0x0bffffff]
Nov 27 22:19:46 Shiroko kernel: e820: reserve RAM buffer [mem 0x09eb6018-0x0bffffff]
Nov 27 22:19:46 Shiroko kernel: e820: reserve RAM buffer [mem 0x09ec5018-0x0bffffff]
Nov 27 22:19:46 Shiroko kernel: e820: reserve RAM buffer [mem 0xde33b000-0xdfffffff]
Nov 27 22:19:46 Shiroko kernel: e820: reserve RAM buffer [mem 0xdf478000-0xdfffffff]
Nov 27 22:19:46 Shiroko kernel: e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
Nov 27 22:19:46 Shiroko kernel: e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
Nov 27 22:19:46 Shiroko kernel: NetLabel: Initializing
Nov 27 22:19:46 Shiroko kernel: NetLabel:  domain hash size = 128
Nov 27 22:19:46 Shiroko kernel: NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
Nov 27 22:19:46 Shiroko kernel: NetLabel:  unlabeled traffic allowed by default
Nov 27 22:19:46 Shiroko kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Nov 27 22:19:46 Shiroko kernel: hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Nov 27 22:19:46 Shiroko kernel: clocksource: Switched to clocksource tsc-early
Nov 27 22:19:46 Shiroko kernel: VFS: Disk quotas dquot_6.6.0
Nov 27 22:19:46 Shiroko kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Nov 27 22:19:46 Shiroko kernel: pnp: PnP ACPI init
Nov 27 22:19:46 Shiroko kernel: system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
Nov 27 22:19:46 Shiroko kernel: system 00:01: [io  0x0680-0x069f] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:01: [io  0x0200-0x020f] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:01: [io  0xffff] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:01: [io  0xffff] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:01: [io  0x0400-0x0453] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:01: [io  0x0458-0x047f] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:01: [io  0x0500-0x057f] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:01: [io  0x164e-0x164f] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
Nov 27 22:19:46 Shiroko kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
Nov 27 22:19:46 Shiroko kernel: system 00:03: [io  0x0454-0x0457] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
Nov 27 22:19:46 Shiroko kernel: system 00:04: [io  0x0290-0x029f] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
Nov 27 22:19:46 Shiroko kernel: system 00:05: [io  0x04d0-0x04d1] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
Nov 27 22:19:46 Shiroko kernel: system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:06: [mem 0xff000000-0xffffffff] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
Nov 27 22:19:46 Shiroko kernel: system 00:06: [mem 0xf0200000-0xf0200fff] has been reserved
Nov 27 22:19:46 Shiroko kernel: system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
Nov 27 22:19:46 Shiroko kernel: pnp: PnP ACPI: found 7 devices
Nov 27 22:19:46 Shiroko kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.0: BAR 14: assigned [mem 0xea000000-0xea1fffff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.0: BAR 15: assigned [mem 0xea200000-0xea3fffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.0:   bridge window [mem 0xea000000-0xea1fffff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.0:   bridge window [mem 0xea200000-0xea3fffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.4: PCI bridge to [bus 03]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.4:   bridge window [mem 0xf7500000-0xf75fffff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.5: PCI bridge to [bus 04]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.5:   bridge window [mem 0xf7400000-0xf74fffff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.6: PCI bridge to [bus 05]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.6:   bridge window [mem 0xf7300000-0xf73fffff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:01.0: PCI bridge to [bus 08]
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:01.0:   bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci 0000:09:00.0: PCI bridge to [bus 0a]
Nov 27 22:19:46 Shiroko kernel: pci 0000:09:00.0:   bridge window [mem 0xec000000-0xefffffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:04.0: PCI bridge to [bus 09-0a]
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:04.0:   bridge window [mem 0xec000000-0xefffffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:05.0: PCI bridge to [bus 0b]
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:06.0: PCI bridge to [bus 0c]
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:06.0:   bridge window [mem 0xf7100000-0xf71fffff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:06.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:07.0: PCI bridge to [bus 0d]
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:08.0: PCI bridge to [bus 0e]
Nov 27 22:19:46 Shiroko kernel: pci 0000:07:09.0: PCI bridge to [bus 0f]
Nov 27 22:19:46 Shiroko kernel: pci 0000:06:00.0: PCI bridge to [bus 07-0f]
Nov 27 22:19:46 Shiroko kernel: pci 0000:06:00.0:   bridge window [mem 0xf7100000-0xf71fffff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:06:00.0:   bridge window [mem 0xec000000-0xf01fffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.7: PCI bridge to [bus 06-0f]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.7:   bridge window [mem 0xf7100000-0xf72fffff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1c.7:   bridge window [mem 0xec000000-0xf01fffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff window]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfeafffff window]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:02: resource 1 [mem 0xea000000-0xea1fffff]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:02: resource 2 [mem 0xea200000-0xea3fffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:03: resource 1 [mem 0xf7500000-0xf75fffff]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:04: resource 1 [mem 0xf7400000-0xf74fffff]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:05: resource 1 [mem 0xf7300000-0xf73fffff]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:06: resource 1 [mem 0xf7100000-0xf72fffff]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:06: resource 2 [mem 0xec000000-0xf01fffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:07: resource 1 [mem 0xf7100000-0xf71fffff]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:07: resource 2 [mem 0xec000000-0xf01fffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:08: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:09: resource 2 [mem 0xec000000-0xefffffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:0a: resource 2 [mem 0xec000000-0xefffffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:0a: resource 4 [mem 0xec000000-0xefffffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:0c: resource 1 [mem 0xf7100000-0xf71fffff]
Nov 27 22:19:46 Shiroko kernel: pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
Nov 27 22:19:46 Shiroko kernel: NET: Registered protocol family 2
Nov 27 22:19:46 Shiroko kernel: tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
Nov 27 22:19:46 Shiroko kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Nov 27 22:19:46 Shiroko kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Nov 27 22:19:46 Shiroko kernel: TCP: Hash tables configured (established 131072 bind 65536)
Nov 27 22:19:46 Shiroko kernel: UDP hash table entries: 8192 (order: 6, 262144 bytes)
Nov 27 22:19:46 Shiroko kernel: UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
Nov 27 22:19:46 Shiroko kernel: NET: Registered protocol family 1
Nov 27 22:19:46 Shiroko kernel: NET: Registered protocol family 44
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6c7 took 33760 usecs
Nov 27 22:19:46 Shiroko kernel: pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c7 took 29264 usecs
Nov 27 22:19:46 Shiroko kernel: pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
Nov 27 22:19:46 Shiroko kernel: pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
Nov 27 22:19:46 Shiroko kernel: PCI: CLS 64 bytes, default 64
Nov 27 22:19:46 Shiroko kernel: Unpacking initramfs...
Nov 27 22:19:46 Shiroko kernel: Freeing initrd memory: 17920K
Nov 27 22:19:46 Shiroko kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Nov 27 22:19:46 Shiroko kernel: software IO TLB: mapped [mem 0xda33b000-0xde33b000] (64MB)
Nov 27 22:19:46 Shiroko kernel: Scanning for low memory corruption every 60 seconds
Nov 27 22:19:46 Shiroko kernel: Initialise system trusted keyrings
Nov 27 22:19:46 Shiroko kernel: Key type blacklist registered
Nov 27 22:19:46 Shiroko kernel: workingset: timestamp_bits=46 max_order=22 bucket_order=0
Nov 27 22:19:46 Shiroko kernel: zbud: loaded
Nov 27 22:19:46 Shiroko kernel: pstore: using zstd compression
Nov 27 22:19:46 Shiroko kernel: Key type asymmetric registered
Nov 27 22:19:46 Shiroko kernel: Asymmetric key parser 'x509' registered
Nov 27 22:19:46 Shiroko kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
Nov 27 22:19:46 Shiroko kernel: io scheduler noop registered
Nov 27 22:19:46 Shiroko kernel: io scheduler deadline registered
Nov 27 22:19:46 Shiroko kernel: io scheduler cfq registered (default)
Nov 27 22:19:46 Shiroko kernel: io scheduler mq-deadline registered
Nov 27 22:19:46 Shiroko kernel: io scheduler kyber registered
Nov 27 22:19:46 Shiroko kernel: io scheduler bfq registered
Nov 27 22:19:46 Shiroko kernel: pcieport 0000:00:01.0: Signaling PME with IRQ 24
Nov 27 22:19:46 Shiroko kernel: pcieport 0000:00:1c.0: Signaling PME with IRQ 25
Nov 27 22:19:46 Shiroko kernel: pcieport 0000:00:1c.4: Signaling PME with IRQ 26
Nov 27 22:19:46 Shiroko kernel: pcieport 0000:00:1c.5: Signaling PME with IRQ 27
Nov 27 22:19:46 Shiroko kernel: pcieport 0000:00:1c.6: Signaling PME with IRQ 28
Nov 27 22:19:46 Shiroko kernel: pcieport 0000:00:1c.7: Signaling PME with IRQ 29
Nov 27 22:19:46 Shiroko kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 27 22:19:46 Shiroko kernel: efifb: probing for efifb
Nov 27 22:19:46 Shiroko kernel: efifb: No BGRT, not showing boot graphics
Nov 27 22:19:46 Shiroko kernel: efifb: framebuffer at 0xe9000000, using 3072k, total 3072k
Nov 27 22:19:46 Shiroko kernel: efifb: mode is 1024x768x32, linelength=4096, pages=1
Nov 27 22:19:46 Shiroko kernel: efifb: scrolling: redraw
Nov 27 22:19:46 Shiroko kernel: efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Nov 27 22:19:46 Shiroko kernel: fbcon: Deferring console take-over
Nov 27 22:19:46 Shiroko kernel: fb0: EFI VGA frame buffer device
Nov 27 22:19:46 Shiroko kernel: intel_idle: MWAIT substates: 0x1120
Nov 27 22:19:46 Shiroko kernel: intel_idle: v0.4.1 model 0x2A
Nov 27 22:19:46 Shiroko kernel: intel_idle: lapic_timer_reliable_states 0xffffffff
Nov 27 22:19:46 Shiroko kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Nov 27 22:19:46 Shiroko kernel: ACPI: Power Button [PWRB]
Nov 27 22:19:46 Shiroko kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
Nov 27 22:19:46 Shiroko kernel: ACPI: Power Button [PWRF]
Nov 27 22:19:46 Shiroko kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Nov 27 22:19:46 Shiroko kernel: usbcore: registered new interface driver usbserial_generic
Nov 27 22:19:46 Shiroko kernel: usbserial: USB Serial support registered for generic
Nov 27 22:19:46 Shiroko kernel: rtc_cmos 00:02: RTC can wake from S4
Nov 27 22:19:46 Shiroko kernel: rtc_cmos 00:02: registered as rtc0
Nov 27 22:19:46 Shiroko kernel: rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Nov 27 22:19:46 Shiroko kernel: intel_pstate: Intel P-state driver initializing
Nov 27 22:19:46 Shiroko kernel: ledtrig-cpu: registered to indicate activity on CPUs
Nov 27 22:19:46 Shiroko kernel: NET: Registered protocol family 10
Nov 27 22:19:46 Shiroko kernel: Segment Routing with IPv6
Nov 27 22:19:46 Shiroko kernel: NET: Registered protocol family 17
Nov 27 22:19:46 Shiroko kernel: RAS: Correctable Errors collector initialized.
Nov 27 22:19:46 Shiroko kernel: microcode: sig=0x206a7, pf=0x2, revision=0x2e
Nov 27 22:19:46 Shiroko kernel: microcode: Microcode Update Driver: v2.2.
Nov 27 22:19:46 Shiroko kernel: sched_clock: Marking stable (2479421372, 177762)->(2489776293, -10177159)
Nov 27 22:19:46 Shiroko kernel: registered taskstats version 1
Nov 27 22:19:46 Shiroko kernel: Loading compiled-in X.509 certificates
Nov 27 22:19:46 Shiroko kernel: Loaded X.509 cert 'Build time autogenerated kernel key: 2b50cf5a36a6383e59f6856473c5d915281d99e6'
Nov 27 22:19:46 Shiroko kernel: zswap: loaded using pool lzo/zbud
Nov 27 22:19:46 Shiroko kernel: Key type big_key registered
Nov 27 22:19:46 Shiroko kernel:   Magic number: 10:709:332
Nov 27 22:19:46 Shiroko kernel: tty tty53: hash matches
Nov 27 22:19:46 Shiroko kernel: rtc_cmos 00:02: setting system clock to 2018-11-27 13:19:38 UTC (1543324778)
Nov 27 22:19:46 Shiroko kernel: Freeing unused decrypted memory: 2040K
Nov 27 22:19:46 Shiroko kernel: Freeing unused kernel image memory: 1496K
Nov 27 22:19:46 Shiroko kernel: Write protecting the kernel read-only data: 16384k
Nov 27 22:19:46 Shiroko kernel: Freeing unused kernel image memory: 2008K
Nov 27 22:19:46 Shiroko kernel: Freeing unused kernel image memory: 484K
Nov 27 22:19:46 Shiroko kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
Nov 27 22:19:46 Shiroko kernel: x86/mm: Checking user space page tables
Nov 27 22:19:46 Shiroko kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
Nov 27 22:19:46 Shiroko kernel: MuQSS CPU scheduler v0.180 by Con Kolivas.
Nov 27 22:19:46 Shiroko kernel: Run /init as init process
Nov 27 22:19:46 Shiroko kernel: ipmi message handler version 39.2
Nov 27 22:19:46 Shiroko kernel: ipmi device interface
Nov 27 22:19:46 Shiroko kernel: nvidia: loading out-of-tree module taints kernel.
Nov 27 22:19:46 Shiroko kernel: nvidia: module license 'NVIDIA' taints kernel.
Nov 27 22:19:46 Shiroko kernel: Disabling lock debugging due to kernel taint
Nov 27 22:19:46 Shiroko kernel: nvidia: module verification failed: signature and/or required key missing - tainting kernel
Nov 27 22:19:46 Shiroko kernel: nvidia-nvlink: Nvlink Core is being initialized, major device number 241
Nov 27 22:19:46 Shiroko kernel: nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
Nov 27 22:19:46 Shiroko kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  415.18  Thu Nov 15 22:01:24 CST 2018 (using threaded interrupts)
Nov 27 22:19:46 Shiroko kernel: nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  415.18  Thu Nov 15 21:35:37 CST 2018
Nov 27 22:19:46 Shiroko kernel: nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 239
Nov 27 22:19:46 Shiroko kernel: Linux agpgart interface v0.103
Nov 27 22:19:46 Shiroko kernel: [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
Nov 27 22:19:46 Shiroko kernel: tsc: Refined TSC clocksource calibration: 3492.067 MHz
Nov 27 22:19:46 Shiroko kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32560b09237, max_idle_ns: 440795350722 ns
Nov 27 22:19:46 Shiroko kernel: clocksource: Switched to clocksource tsc
Nov 27 22:19:46 Shiroko kernel: resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000dc000-0x000dffff window]
Nov 27 22:19:46 Shiroko kernel: caller _nv001095rm+0xe3/0x1d0 [nvidia] mapping multiple BARs
Nov 27 22:19:46 Shiroko kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Nov 27 22:19:46 Shiroko kernel: [drm] No driver support for vblank timestamp query.
Nov 27 22:19:46 Shiroko kernel: [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
Nov 27 22:19:46 Shiroko kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Nov 27 22:19:46 Shiroko kernel: ehci-pci: EHCI PCI platform driver
Nov 27 22:19:46 Shiroko kernel: ehci-pci 0000:00:1a.0: EHCI Host Controller
Nov 27 22:19:46 Shiroko kernel: ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
Nov 27 22:19:46 Shiroko kernel: ehci-pci 0000:00:1a.0: debug port 2
Nov 27 22:19:46 Shiroko kernel: SCSI subsystem initialized
Nov 27 22:19:46 Shiroko kernel: ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
Nov 27 22:19:46 Shiroko kernel: ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7608000
Nov 27 22:19:46 Shiroko kernel: libata version 3.00 loaded.
Nov 27 22:19:46 Shiroko kernel: ahci 0000:00:1f.2: version 3.0
Nov 27 22:19:46 Shiroko kernel: ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
Nov 27 22:19:46 Shiroko kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
Nov 27 22:19:46 Shiroko kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 27 22:19:46 Shiroko kernel: usb usb1: Product: EHCI Host Controller
Nov 27 22:19:46 Shiroko kernel: usb usb1: Manufacturer: Linux 4.19.4-1-ck-sandybridge ehci_hcd
Nov 27 22:19:46 Shiroko kernel: usb usb1: SerialNumber: 0000:00:1a.0
Nov 27 22:19:46 Shiroko kernel: hub 1-0:1.0: USB hub found
Nov 27 22:19:46 Shiroko kernel: hub 1-0:1.0: 2 ports detected
Nov 27 22:19:46 Shiroko kernel: xhci_hcd 0000:04:00.0: xHCI Host Controller
Nov 27 22:19:46 Shiroko kernel: xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
Nov 27 22:19:46 Shiroko kernel: xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490
Nov 27 22:19:46 Shiroko kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
Nov 27 22:19:46 Shiroko kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 27 22:19:46 Shiroko kernel: usb usb2: Product: xHCI Host Controller
Nov 27 22:19:46 Shiroko kernel: usb usb2: Manufacturer: Linux 4.19.4-1-ck-sandybridge xhci-hcd
Nov 27 22:19:46 Shiroko kernel: usb usb2: SerialNumber: 0000:04:00.0
Nov 27 22:19:46 Shiroko kernel: hub 2-0:1.0: USB hub found
Nov 27 22:19:46 Shiroko kernel: hub 2-0:1.0: 2 ports detected
Nov 27 22:19:46 Shiroko kernel: ehci-pci 0000:00:1d.0: EHCI Host Controller
Nov 27 22:19:46 Shiroko kernel: ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
Nov 27 22:19:46 Shiroko kernel: xhci_hcd 0000:04:00.0: xHCI Host Controller
Nov 27 22:19:46 Shiroko kernel: xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
Nov 27 22:19:46 Shiroko kernel: xhci_hcd 0000:04:00.0: Host supports USB 3.0  SuperSpeed
Nov 27 22:19:46 Shiroko kernel: ehci-pci 0000:00:1d.0: debug port 2
Nov 27 22:19:46 Shiroko kernel: usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Nov 27 22:19:46 Shiroko kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
Nov 27 22:19:46 Shiroko kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 27 22:19:46 Shiroko kernel: usb usb4: Product: xHCI Host Controller
Nov 27 22:19:46 Shiroko kernel: usb usb4: Manufacturer: Linux 4.19.4-1-ck-sandybridge xhci-hcd
Nov 27 22:19:46 Shiroko kernel: usb usb4: SerialNumber: 0000:04:00.0
Nov 27 22:19:46 Shiroko kernel: hub 4-0:1.0: USB hub found
Nov 27 22:19:46 Shiroko kernel: hub 4-0:1.0: 2 ports detected
Nov 27 22:19:46 Shiroko kernel: ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
Nov 27 22:19:46 Shiroko kernel: ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7607000
Nov 27 22:19:46 Shiroko kernel: ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
Nov 27 22:19:46 Shiroko kernel: ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
Nov 27 22:19:46 Shiroko kernel: ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Nov 27 22:19:46 Shiroko kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
Nov 27 22:19:46 Shiroko kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 27 22:19:46 Shiroko kernel: usb usb3: Product: EHCI Host Controller
Nov 27 22:19:46 Shiroko kernel: usb usb3: Manufacturer: Linux 4.19.4-1-ck-sandybridge ehci_hcd
Nov 27 22:19:46 Shiroko kernel: usb usb3: SerialNumber: 0000:00:1d.0
Nov 27 22:19:46 Shiroko kernel: hub 3-0:1.0: USB hub found
Nov 27 22:19:46 Shiroko kernel: hub 3-0:1.0: 2 ports detected
Nov 27 22:19:46 Shiroko kernel: xhci_hcd 0000:05:00.0: xHCI Host Controller
Nov 27 22:19:46 Shiroko kernel: xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
Nov 27 22:19:46 Shiroko kernel: xhci_hcd 0000:05:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490
Nov 27 22:19:46 Shiroko kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
Nov 27 22:19:46 Shiroko kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 27 22:19:46 Shiroko kernel: usb usb5: Product: xHCI Host Controller
Nov 27 22:19:46 Shiroko kernel: usb usb5: Manufacturer: Linux 4.19.4-1-ck-sandybridge xhci-hcd
Nov 27 22:19:46 Shiroko kernel: usb usb5: SerialNumber: 0000:05:00.0
Nov 27 22:19:46 Shiroko kernel: hub 5-0:1.0: USB hub found
Nov 27 22:19:46 Shiroko kernel: hub 5-0:1.0: 2 ports detected
Nov 27 22:19:46 Shiroko kernel: xhci_hcd 0000:05:00.0: xHCI Host Controller
Nov 27 22:19:46 Shiroko kernel: xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
Nov 27 22:19:46 Shiroko kernel: xhci_hcd 0000:05:00.0: Host supports USB 3.0  SuperSpeed
Nov 27 22:19:46 Shiroko kernel: usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
Nov 27 22:19:46 Shiroko kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
Nov 27 22:19:46 Shiroko kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 27 22:19:46 Shiroko kernel: usb usb6: Product: xHCI Host Controller
Nov 27 22:19:46 Shiroko kernel: usb usb6: Manufacturer: Linux 4.19.4-1-ck-sandybridge xhci-hcd
Nov 27 22:19:46 Shiroko kernel: usb usb6: SerialNumber: 0000:05:00.0
Nov 27 22:19:46 Shiroko kernel: hub 6-0:1.0: USB hub found
Nov 27 22:19:46 Shiroko kernel: hub 6-0:1.0: 2 ports detected
Nov 27 22:19:46 Shiroko kernel: scsi host0: ahci
Nov 27 22:19:46 Shiroko kernel: scsi host1: ahci
Nov 27 22:19:46 Shiroko kernel: scsi host2: ahci
Nov 27 22:19:46 Shiroko kernel: scsi host3: ahci
Nov 27 22:19:46 Shiroko kernel: scsi host4: ahci
Nov 27 22:19:46 Shiroko kernel: scsi host5: ahci
Nov 27 22:19:46 Shiroko kernel: ata1: SATA max UDMA/133 abar m2048@0xf7606000 port 0xf7606100 irq 39
Nov 27 22:19:46 Shiroko kernel: ata2: SATA max UDMA/133 abar m2048@0xf7606000 port 0xf7606180 irq 39
Nov 27 22:19:46 Shiroko kernel: ata3: SATA max UDMA/133 abar m2048@0xf7606000 port 0xf7606200 irq 39
Nov 27 22:19:46 Shiroko kernel: ata4: SATA max UDMA/133 abar m2048@0xf7606000 port 0xf7606280 irq 39
Nov 27 22:19:46 Shiroko kernel: ata5: SATA max UDMA/133 abar m2048@0xf7606000 port 0xf7606300 irq 39
Nov 27 22:19:46 Shiroko kernel: ata6: SATA max UDMA/133 abar m2048@0xf7606000 port 0xf7606380 irq 39
Nov 27 22:19:46 Shiroko kernel: ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
Nov 27 22:19:46 Shiroko kernel: ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
Nov 27 22:19:46 Shiroko kernel: scsi host6: ahci
Nov 27 22:19:46 Shiroko kernel: scsi host7: ahci
Nov 27 22:19:46 Shiroko kernel: ata7: SATA max UDMA/133 abar m2048@0xf7510000 port 0xf7510100 irq 42
Nov 27 22:19:46 Shiroko kernel: ata8: SATA max UDMA/133 abar m2048@0xf7510000 port 0xf7510180 irq 42
Nov 27 22:19:46 Shiroko kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 27 22:19:46 Shiroko kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Nov 27 22:19:46 Shiroko kernel: ata2: SATA link down (SStatus 0 SControl 300)
Nov 27 22:19:46 Shiroko kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 27 22:19:46 Shiroko kernel: ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 27 22:19:46 Shiroko kernel: ata7: SATA link down (SStatus 0 SControl 330)
Nov 27 22:19:46 Shiroko kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 27 22:19:46 Shiroko kernel: ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Nov 27 22:19:46 Shiroko kernel: ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Nov 27 22:19:46 Shiroko kernel: ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Nov 27 22:19:46 Shiroko kernel: ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Nov 27 22:19:46 Shiroko kernel: ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Nov 27 22:19:46 Shiroko kernel: ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Nov 27 22:19:46 Shiroko kernel: ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Nov 27 22:19:46 Shiroko kernel: ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Nov 27 22:19:46 Shiroko kernel: ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Nov 27 22:19:46 Shiroko kernel: ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Nov 27 22:19:46 Shiroko kernel: ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Nov 27 22:19:46 Shiroko kernel: ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Nov 27 22:19:46 Shiroko kernel: ata3.00: ATA-8: Hitachi HDP725050GLA360, GM4OA52A, max UDMA/133
Nov 27 22:19:46 Shiroko kernel: ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
Nov 27 22:19:46 Shiroko kernel: ata4.00: ATA-8: Hitachi HDP725050GLA360, GM4OA52A, max UDMA/133
Nov 27 22:19:46 Shiroko kernel: ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
Nov 27 22:19:46 Shiroko kernel: ata5.00: ATA-8: Hitachi HDP725050GLA360, GM4OA52A, max UDMA/133
Nov 27 22:19:46 Shiroko kernel: ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
Nov 27 22:19:46 Shiroko kernel: ata6.00: ATA-8: Hitachi HDP725050GLA360, GM4OA52A, max UDMA/133
Nov 27 22:19:46 Shiroko kernel: ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
Nov 27 22:19:46 Shiroko kernel: ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Nov 27 22:19:46 Shiroko kernel: ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Nov 27 22:19:46 Shiroko kernel: ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Nov 27 22:19:46 Shiroko kernel: ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Nov 27 22:19:46 Shiroko kernel: ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Nov 27 22:19:46 Shiroko kernel: ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Nov 27 22:19:46 Shiroko kernel: ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Nov 27 22:19:46 Shiroko kernel: ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Nov 27 22:19:46 Shiroko kernel: ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Nov 27 22:19:46 Shiroko kernel: ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Nov 27 22:19:46 Shiroko kernel: ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Nov 27 22:19:46 Shiroko kernel: ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Nov 27 22:19:46 Shiroko kernel: ata3.00: configured for UDMA/133
Nov 27 22:19:46 Shiroko kernel: ata4.00: configured for UDMA/133
Nov 27 22:19:46 Shiroko kernel: ata5.00: configured for UDMA/133
Nov 27 22:19:46 Shiroko kernel: ata6.00: configured for UDMA/133
Nov 27 22:19:46 Shiroko kernel: ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Nov 27 22:19:46 Shiroko kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Nov 27 22:19:46 Shiroko kernel: ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Nov 27 22:19:46 Shiroko kernel: ata1.00: ATAPI: HL-DT-ST BD-RE  BH10NS38, 1.00, max UDMA/133
Nov 27 22:19:46 Shiroko kernel: ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Nov 27 22:19:46 Shiroko kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Nov 27 22:19:46 Shiroko kernel: ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Nov 27 22:19:46 Shiroko kernel: usb 1-1: new high-speed USB device number 2 using ehci-pci
Nov 27 22:19:46 Shiroko kernel: ata1.00: configured for UDMA/133
Nov 27 22:19:46 Shiroko kernel: usb 3-1: new high-speed USB device number 2 using ehci-pci
Nov 27 22:19:46 Shiroko kernel: scsi 0:0:0:0: CD-ROM            HL-DT-ST BD-RE  BH10NS38  1.00 PQ: 0 ANSI: 5
Nov 27 22:19:46 Shiroko kernel: scsi 2:0:0:0: Direct-Access     ATA      Hitachi HDP72505 A52A PQ: 0 ANSI: 5
Nov 27 22:19:46 Shiroko kernel: scsi 3:0:0:0: Direct-Access     ATA      Hitachi HDP72505 A52A PQ: 0 ANSI: 5
Nov 27 22:19:46 Shiroko kernel: scsi 4:0:0:0: Direct-Access     ATA      Hitachi HDP72505 A52A PQ: 0 ANSI: 5
Nov 27 22:19:46 Shiroko kernel: scsi 5:0:0:0: Direct-Access     ATA      Hitachi HDP72505 A52A PQ: 0 ANSI: 5
Nov 27 22:19:46 Shiroko kernel: ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
Nov 27 22:19:46 Shiroko kernel: ata8.00: ATA-8: Hitachi HDS723020BLA642, MN6OA800, max UDMA/133
Nov 27 22:19:46 Shiroko kernel: ata8.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA
Nov 27 22:19:46 Shiroko kernel: ata8.00: configured for UDMA/133
Nov 27 22:19:46 Shiroko kernel: scsi 7:0:0:0: Direct-Access     ATA      Hitachi HDS72302 A800 PQ: 0 ANSI: 5
Nov 27 22:19:46 Shiroko kernel: sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
Nov 27 22:19:46 Shiroko kernel: sd 2:0:0:0: [sda] Write Protect is off
Nov 27 22:19:46 Shiroko kernel: sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
Nov 27 22:19:46 Shiroko kernel: sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 27 22:19:46 Shiroko kernel: sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
Nov 27 22:19:46 Shiroko kernel: sd 3:0:0:0: [sdb] Write Protect is off
Nov 27 22:19:46 Shiroko kernel: sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Nov 27 22:19:46 Shiroko kernel: sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 27 22:19:46 Shiroko kernel: sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
Nov 27 22:19:46 Shiroko kernel: sd 4:0:0:0: [sdc] Write Protect is off
Nov 27 22:19:46 Shiroko kernel: sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Nov 27 22:19:46 Shiroko kernel: sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 27 22:19:46 Shiroko kernel: sd 5:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/466 GiB)
Nov 27 22:19:46 Shiroko kernel: sd 5:0:0:0: [sdd] Write Protect is off
Nov 27 22:19:46 Shiroko kernel: sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
Nov 27 22:19:46 Shiroko kernel: sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 27 22:19:46 Shiroko kernel: sd 7:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
Nov 27 22:19:46 Shiroko kernel: sd 7:0:0:0: [sde] Write Protect is off
Nov 27 22:19:46 Shiroko kernel: sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
Nov 27 22:19:46 Shiroko kernel: sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 27 22:19:46 Shiroko kernel: sd 4:0:0:0: [sdc] Attached SCSI disk
Nov 27 22:19:46 Shiroko kernel: sd 5:0:0:0: [sdd] Attached SCSI disk
Nov 27 22:19:46 Shiroko kernel: sd 2:0:0:0: [sda] Attached SCSI disk
Nov 27 22:19:46 Shiroko kernel: usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
Nov 27 22:19:46 Shiroko kernel: usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Nov 27 22:19:46 Shiroko kernel: hub 1-1:1.0: USB hub found
Nov 27 22:19:46 Shiroko kernel: hub 1-1:1.0: 6 ports detected
Nov 27 22:19:46 Shiroko kernel: sd 3:0:0:0: [sdb] Attached SCSI disk
Nov 27 22:19:46 Shiroko kernel: usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
Nov 27 22:19:46 Shiroko kernel: usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Nov 27 22:19:46 Shiroko kernel: hub 3-1:1.0: USB hub found
Nov 27 22:19:46 Shiroko kernel: hub 3-1:1.0: 8 ports detected
Nov 27 22:19:46 Shiroko kernel: sr 0:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Nov 27 22:19:46 Shiroko kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
Nov 27 22:19:46 Shiroko kernel: sr 0:0:0:0: Attached scsi CD-ROM sr0
Nov 27 22:19:46 Shiroko kernel:  sde: sde1
Nov 27 22:19:46 Shiroko kernel: sd 7:0:0:0: [sde] Attached SCSI removable disk
Nov 27 22:19:46 Shiroko kernel: md126: detected capacity change from 0 to 2000420864000
Nov 27 22:19:46 Shiroko kernel:  md126: p1 p2
Nov 27 22:19:46 Shiroko kernel: random: fast init done
Nov 27 22:19:46 Shiroko kernel: usb 3-1.1: new full-speed USB device number 3 using ehci-pci
Nov 27 22:19:46 Shiroko kernel: usb 3-1.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.01
Nov 27 22:19:46 Shiroko kernel: usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 27 22:19:46 Shiroko kernel: usb 3-1.1: Product: USB Receiver
Nov 27 22:19:46 Shiroko kernel: usb 3-1.1: Manufacturer: Logitech
Nov 27 22:19:46 Shiroko kernel: hidraw: raw HID events driver (C) Jiri Kosina
Nov 27 22:19:46 Shiroko kernel: usbcore: registered new interface driver usbhid
Nov 27 22:19:46 Shiroko kernel: usbhid: USB HID core driver
Nov 27 22:19:46 Shiroko kernel: logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input2
Nov 27 22:19:46 Shiroko kernel: usb 3-1.2: new full-speed USB device number 4 using ehci-pci
Nov 27 22:19:46 Shiroko kernel: input: Logitech Unifying Device. Wireless PID:400a Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:046D:C52B.0003/0003:046D:400A.0004/input/input2
Nov 27 22:19:46 Shiroko kernel: hid-generic 0003:046D:400A.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:1d.0-1.1:1
Nov 27 22:19:46 Shiroko kernel: input: Logitech Unifying Device. Wireless PID:4003 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:046D:C52B.0003/0003:046D:4003.0005/input/input6
Nov 27 22:19:46 Shiroko kernel: input: Logitech Unifying Device. Wireless PID:4003 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:046D:C52B.0003/0003:046D:4003.0005/input/input7
Nov 27 22:19:46 Shiroko kernel: input: Logitech Unifying Device. Wireless PID:4003 System Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:046D:C52B.0003/0003:046D:4003.0005/input/input8
Nov 27 22:19:46 Shiroko kernel: hid-generic 0003:046D:4003.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4003] on usb-0000:00:1d.0-1.1:2
Nov 27 22:19:46 Shiroko kernel: input: Logitech M325 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:046D:C52B.0003/0003:046D:400A.0004/input/input12
Nov 27 22:19:46 Shiroko kernel: logitech-hidpp-device 0003:046D:400A.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:1d.0-1.1:1
Nov 27 22:19:46 Shiroko kernel: input: Logitech K270 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:046D:C52B.0003/0003:046D:4003.0006/input/input13
Nov 27 22:19:46 Shiroko kernel: logitech-hidpp-device 0003:046D:4003.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech K270] on usb-0000:00:1d.0-1.1:3
Nov 27 22:19:46 Shiroko kernel: input: Logitech M545/M546 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:046D:C52B.0003/0003:046D:4052.0007/input/input14
Nov 27 22:19:46 Shiroko kernel: logitech-hidpp-device 0003:046D:4052.0007: input,hidraw2: USB HID v1.11 Mouse [Logitech M545/M546] on usb-0000:00:1d.0-1.1:4
Nov 27 22:19:46 Shiroko kernel: input: Logitech K270 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.2/0003:046D:C52B.0003/0003:046D:4003.0005/input/input15
Nov 27 22:19:46 Shiroko kernel: logitech-hidpp-device 0003:046D:4003.0005: input,hidraw4: USB HID v1.11 Keyboard [Logitech K270] on usb-0000:00:1d.0-1.1:2
Nov 27 22:19:46 Shiroko kernel: usb 3-1.2: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=48.39
Nov 27 22:19:46 Shiroko kernel: usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3: new high-speed USB device number 5 using ehci-pci
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3: New USB device found, idVendor=0424, idProduct=a700, bcdDevice= 0.00
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Nov 27 22:19:46 Shiroko kernel: hub 3-1.3:1.0: USB hub found
Nov 27 22:19:46 Shiroko kernel: hub 3-1.3:1.0: 4 ports detected
Nov 27 22:19:46 Shiroko kernel: usb 3-1.4: new full-speed USB device number 6 using ehci-pci
Nov 27 22:19:46 Shiroko kernel: PM: Image not found (code -22)
Nov 27 22:19:46 Shiroko kernel: usb 3-1.4: New USB device found, idVendor=04e6, idProduct=511a, bcdDevice= 2.03
Nov 27 22:19:46 Shiroko kernel: usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 27 22:19:46 Shiroko kernel: usb 3-1.4: Product: SCR3310-NTTCom USB SmartCard Reader
Nov 27 22:19:46 Shiroko kernel: usb 3-1.4: Manufacturer: NTT Communications Corp.
Nov 27 22:19:46 Shiroko kernel: fbcon: Taking over console
Nov 27 22:19:46 Shiroko kernel: Console: switching to colour frame buffer device 128x48
Nov 27 22:19:46 Shiroko kernel: EXT4-fs (md126p2): mounted filesystem with writeback data mode. Opts: journal_checksum,journal_async_commit,commit=60,max_batch_time=30000,stripe=128,data=writeback,inode_readahead_blks=64
Nov 27 22:19:46 Shiroko kernel: usb 3-1.8: new high-speed USB device number 7 using ehci-pci
Nov 27 22:19:46 Shiroko kernel: random: crng init done
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3.1: new full-speed USB device number 8 using ehci-pci
Nov 27 22:19:46 Shiroko kernel: usb 3-1.8: New USB device found, idVendor=048d, idProduct=1345, bcdDevice= 1.00
Nov 27 22:19:46 Shiroko kernel: usb 3-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 27 22:19:46 Shiroko kernel: usb 3-1.8: Product: Mass Storage Device
Nov 27 22:19:46 Shiroko kernel: usb 3-1.8: Manufacturer: Generic 
Nov 27 22:19:46 Shiroko kernel: usb 3-1.8: SerialNumber: 0000000000000006
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3.1: New USB device found, idVendor=054c, idProduct=0268, bcdDevice= 1.00
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3.1: Product: PLAYSTATION(R)3 Controller
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3.1: Manufacturer: Sony
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3.2: new full-speed USB device number 9 using ehci-pci
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3.2: New USB device found, idVendor=054c, idProduct=0268, bcdDevice= 1.00
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3.2: Product: PLAYSTATION(R)3 Controller
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3.2: Manufacturer: Sony
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3.3: new full-speed USB device number 10 using ehci-pci
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3.3: New USB device found, idVendor=054c, idProduct=0268, bcdDevice= 1.00
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3.3: Product: PLAYSTATION(R)3 Controller
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3.3: Manufacturer: Sony
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3.4: new full-speed USB device number 11 using ehci-pci
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3.4: New USB device found, idVendor=054c, idProduct=0268, bcdDevice= 1.00
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3.4: Product: PLAYSTATION(R)3 Controller
Nov 27 22:19:46 Shiroko kernel: usb 3-1.3.4: Manufacturer: Sony
Nov 27 22:19:46 Shiroko systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
Nov 27 22:19:46 Shiroko systemd[1]: Detected architecture x86-64.
Nov 27 22:19:46 Shiroko systemd[1]: Set hostname to <Shiroko>.
Nov 27 22:19:46 Shiroko systemd[1]: Listening on Journal Socket (/dev/log).
Nov 27 22:19:46 Shiroko systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Nov 27 22:19:46 Shiroko systemd[1]: Listening on LVM2 poll daemon socket.
Nov 27 22:19:46 Shiroko systemd[1]: Reached target Login Prompts.
Nov 27 22:19:46 Shiroko systemd[1]: Listening on udev Control Socket.
Nov 27 22:19:46 Shiroko systemd[1]: Listening on Journal Audit Socket.
Nov 27 22:19:46 Shiroko systemd[1]: Listening on LVM2 metadata daemon socket.
Nov 27 22:19:46 Shiroko kernel: audit: type=1130 audit(1543324786.805:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:46 Shiroko kernel: audit: type=1130 audit(1543324786.805:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:46 Shiroko systemd-journald[371]: Journal started
-- Subject: The journal has been started
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- The system journal process has started up, opened the journal
-- files for writing and is now ready to process requests.
Nov 27 22:19:46 Shiroko systemd-journald[371]: Runtime journal (/run/log/journal/caeb8904b3054cfab4bb29fde1a4bf5a) is 8.0M, max 799.0M, 791.0M free.
-- Subject: Disk space used by the journal
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Runtime journal (/run/log/journal/caeb8904b3054cfab4bb29fde1a4bf5a) is currently using 8.0M.
-- Maximum allowed usage is set to 799.0M.
-- Leaving at least 1.1G free (of currently available 7.7G of disk space).
-- Enforced usage limit is thus 799.0M, of which 791.0M are still available.
-- 
-- The limits controlling how much disk space is used by the journal may
-- be configured with SystemMaxUse=, SystemKeepFree=, SystemMaxFileSize=,
-- RuntimeMaxUse=, RuntimeKeepFree=, RuntimeMaxFileSize= settings in
-- /etc/systemd/journald.conf. See journald.conf(5) for details.
Nov 27 22:19:46 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:46 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:46 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:46 Shiroko systemd[1]: Starting Flush Journal to Persistent Storage...
-- Subject: Unit systemd-journal-flush.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-journal-flush.service has begun starting up.
Nov 27 22:19:46 Shiroko systemd[1]: Mounted Arbitrary Executable File Formats File System.
-- Subject: Unit proc-sys-fs-binfmt_misc.mount has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit proc-sys-fs-binfmt_misc.mount has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:46 Shiroko kernel: audit: type=1130 audit(1543324786.805:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:46 Shiroko systemd[1]: Started Set Up Additional Binary Formats.
-- Subject: Unit systemd-binfmt.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-binfmt.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:46 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:46 Shiroko kernel: audit: type=1130 audit(1543324786.835:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:46 Shiroko systemd[1]: Started Create list of required static device nodes for the current kernel.
-- Subject: Unit kmod-static-nodes.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit kmod-static-nodes.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:46 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:46 Shiroko systemd[1]: Starting Create Static Device Nodes in /dev...
-- Subject: Unit systemd-tmpfiles-setup-dev.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-tmpfiles-setup-dev.service has begun starting up.
Nov 27 22:19:46 Shiroko kernel: audit: type=1130 audit(1543324786.855:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:46 Shiroko systemd-modules-load[370]: Inserted module 'crypto_user'
Nov 27 22:19:46 Shiroko systemd-journald[371]: Time spent on flushing to /var is 135.562ms for 1262 entries.
Nov 27 22:19:46 Shiroko systemd-journald[371]: System journal (/var/log/journal/caeb8904b3054cfab4bb29fde1a4bf5a) is 3.9G, max 4.0G, 65.7M free.
-- Subject: Disk space used by the journal
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- System journal (/var/log/journal/caeb8904b3054cfab4bb29fde1a4bf5a) is currently using 3.9G.
-- Maximum allowed usage is set to 4.0G.
-- Leaving at least 4.0G free (of currently available 1.2T of disk space).
-- Enforced usage limit is thus 4.0G, of which 65.7M are still available.
-- 
-- The limits controlling how much disk space is used by the journal may
-- be configured with SystemMaxUse=, SystemKeepFree=, SystemMaxFileSize=,
-- RuntimeMaxUse=, RuntimeKeepFree=, RuntimeMaxFileSize= settings in
-- /etc/systemd/journald.conf. See journald.conf(5) for details.
Nov 27 22:19:50 Shiroko kernel: scsi host8: vhba
Nov 27 22:19:50 Shiroko kernel: sr 0:0:0:0: Attached scsi generic sg0 type 5
Nov 27 22:19:50 Shiroko kernel: sd 2:0:0:0: Attached scsi generic sg1 type 0
Nov 27 22:19:50 Shiroko kernel: sd 3:0:0:0: Attached scsi generic sg2 type 0
Nov 27 22:19:50 Shiroko kernel: sd 4:0:0:0: Attached scsi generic sg3 type 0
Nov 27 22:19:50 Shiroko kernel: sd 5:0:0:0: Attached scsi generic sg4 type 0
Nov 27 22:19:50 Shiroko kernel: sd 7:0:0:0: Attached scsi generic sg5 type 0
Nov 27 22:19:50 Shiroko kernel: Adding 4194300k swap on /resume.swp.  Priority:-2 extents:73 across:15499264k FS
Nov 27 22:19:50 Shiroko kernel: audit: type=1130 audit(1543324787.195:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:50 Shiroko kernel: audit: type=1130 audit(1543324787.485:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:50 Shiroko kernel: audit: type=1130 audit(1543324787.585:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:50 Shiroko kernel: audit: type=1130 audit(1543324788.925:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:50 Shiroko kernel: RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
Nov 27 22:19:50 Shiroko kernel: RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
Nov 27 22:19:50 Shiroko kernel: RAPL PMU: hw unit of domain package 2^-16 Joules
Nov 27 22:19:50 Shiroko kernel: RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
Nov 27 22:19:50 Shiroko kernel: i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
Nov 27 22:19:50 Shiroko kernel: cryptd: max_cpu_qlen set to 1000
Nov 27 22:19:50 Shiroko kernel: media: Linux media interface: v0.10
Nov 27 22:19:50 Shiroko kernel: videodev: Linux video capture interface: v2.00
Nov 27 22:19:50 Shiroko kernel: tg3.c:v3.137 (May 11, 2014)
Nov 27 22:19:50 Shiroko kernel: tg3 0000:0c:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:22:35:07
Nov 27 22:19:50 Shiroko kernel: tg3 0000:0c:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
Nov 27 22:19:50 Shiroko kernel: tg3 0000:0c:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
Nov 27 22:19:50 Shiroko kernel: tg3 0000:0c:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
Nov 27 22:19:50 Shiroko kernel: audit: type=1130 audit(1543324789.635:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-networkd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:50 Shiroko kernel: AVX version of gcm_enc/dec engaged.
Nov 27 22:19:50 Shiroko kernel: AES CTR mode by8 optimization enabled
Nov 27 22:19:50 Shiroko kernel: earth_pt3 0000:08:00.0: enabling device (0000 -> 0002)
Nov 27 22:19:50 Shiroko kernel: dvbdev: DVB: registering new adapter (PT3 DVB)
Nov 27 22:19:50 Shiroko kernel: snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
Nov 27 22:19:50 Shiroko kernel: snd_hda_intel: probe of 0000:01:00.1 failed with error -2
Nov 27 22:19:50 Shiroko kernel: Bluetooth: Core ver 2.22
Nov 27 22:19:50 Shiroko kernel: NET: Registered protocol family 31
Nov 27 22:19:50 Shiroko kernel: Bluetooth: HCI device and connection manager initialized
Nov 27 22:19:50 Shiroko kernel: Bluetooth: HCI socket layer initialized
Nov 27 22:19:50 Shiroko kernel: Bluetooth: L2CAP socket layer initialized
Nov 27 22:19:50 Shiroko kernel: Bluetooth: SCO socket layer initialized
Nov 27 22:19:50 Shiroko kernel: tc90522 4-0011: Toshiba TC90522 attached.
Nov 27 22:19:50 Shiroko kernel: mousedev: PS/2 mouse device common for all mice
Nov 27 22:19:50 Shiroko kernel: qm1d1c0042 5-0063: Sharp QM1D1C0042 attached.
Nov 27 22:19:50 Shiroko kernel: earth_pt3 0000:08:00.0: DVB: registering adapter 0 frontend 0 (Toshiba TC90522 ISDB-S module)...
Nov 27 22:19:50 Shiroko kernel: dvbdev: DVB: registering new adapter (PT3 DVB)
Nov 27 22:19:50 Shiroko kernel: tc90522 4-0010: Toshiba TC90522 attached.
Nov 27 22:19:50 Shiroko kernel: gpio_ich: GPIO from 436 to 511 on gpio_ich
Nov 27 22:19:50 Shiroko kernel: ivtv: Start initialization, version 1.4.3
Nov 27 22:19:50 Shiroko kernel: ivtv0: Initializing card 0
Nov 27 22:19:50 Shiroko kernel: ivtv0: Autodetected I/O Data GV-MVP/RX, GV-MVP/RX2W (dual tuner) card (cx23416 based)
Nov 27 22:19:50 Shiroko kernel: ivtv 0000:0a:00.0: enabling device (0000 -> 0002)
Nov 27 22:19:50 Shiroko kernel: ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
Nov 27 22:19:50 Shiroko kernel: mxl301rf 6-0062: MaxLinear MxL301RF attached.
Nov 27 22:19:50 Shiroko kernel: earth_pt3 0000:08:00.0: DVB: registering adapter 1 frontend 0 (Toshiba TC90522 ISDB-T module)...
Nov 27 22:19:50 Shiroko kernel: dvbdev: DVB: registering new adapter (PT3 DVB)
Nov 27 22:19:50 Shiroko kernel: tc90522 4-0013: Toshiba TC90522 attached.
Nov 27 22:19:50 Shiroko kernel: qm1d1c0042 8-0060: Sharp QM1D1C0042 attached.
Nov 27 22:19:50 Shiroko kernel: earth_pt3 0000:08:00.0: DVB: registering adapter 2 frontend 0 (Toshiba TC90522 ISDB-S module)...
Nov 27 22:19:50 Shiroko kernel: dvbdev: DVB: registering new adapter (PT3 DVB)
Nov 27 22:19:50 Shiroko kernel: tc90522 4-0012: Toshiba TC90522 attached.
Nov 27 22:19:50 Shiroko kernel: mxl301rf 9-0061: MaxLinear MxL301RF attached.
Nov 27 22:19:50 Shiroko kernel: earth_pt3 0000:08:00.0: DVB: registering adapter 3 frontend 0 (Toshiba TC90522 ISDB-T module)...
Nov 27 22:19:50 Shiroko kernel: iTCO_vendor_support: vendor-support=0
Nov 27 22:19:50 Shiroko kernel: input: Sony PLAYSTATION(R)3 Controller Motion Sensors as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.0/0003:054C:0268.0008/input/input17
Nov 27 22:19:50 Shiroko kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
Nov 27 22:19:50 Shiroko kernel: iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
Nov 27 22:19:50 Shiroko kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Nov 27 22:19:50 Shiroko kernel: snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
Nov 27 22:19:50 Shiroko kernel: snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Nov 27 22:19:50 Shiroko kernel: snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
Nov 27 22:19:50 Shiroko kernel: snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
Nov 27 22:19:50 Shiroko kernel: snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
Nov 27 22:19:50 Shiroko kernel: snd_hda_codec_realtek hdaudioC0D0:    inputs:
Nov 27 22:19:50 Shiroko kernel: snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
Nov 27 22:19:50 Shiroko kernel: snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
Nov 27 22:19:50 Shiroko kernel: snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
Nov 27 22:19:50 Shiroko kernel: input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
Nov 27 22:19:50 Shiroko kernel: input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
Nov 27 22:19:50 Shiroko kernel: input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
Nov 27 22:19:50 Shiroko kernel: input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
Nov 27 22:19:50 Shiroko kernel: input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
Nov 27 22:19:50 Shiroko kernel: input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
Nov 27 22:19:50 Shiroko kernel: input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
Nov 27 22:19:50 Shiroko kernel: earth_pt3 0000:08:00.0: (send_i2c_cmd) failed.
Nov 27 22:19:50 Shiroko kernel: saa7115 7-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
Nov 27 22:19:50 Shiroko kernel: input: Sony PLAYSTATION(R)3 Controller as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.0/0003:054C:0268.0008/input/input16
Nov 27 22:19:50 Shiroko kernel: sony 0003:054C:0268.0008: input,hiddev1,hidraw5: USB HID v81.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-0000:00:1d.0-1.3.1/input0
Nov 27 22:19:50 Shiroko kernel: input: Sony PLAYSTATION(R)3 Controller Motion Sensors as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2:1.0/0003:054C:0268.0009/input/input26
Nov 27 22:19:50 Shiroko kernel: usbcore: registered new interface driver btusb
Nov 27 22:19:50 Shiroko kernel: input: Sony PLAYSTATION(R)3 Controller as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2:1.0/0003:054C:0268.0009/input/input25
Nov 27 22:19:50 Shiroko kernel: sony 0003:054C:0268.0009: input,hiddev2,hidraw6: USB HID v81.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-0000:00:1d.0-1.3.2/input0
Nov 27 22:19:50 Shiroko kernel: usb-storage 3-1.8:1.0: USB Mass Storage device detected
Nov 27 22:19:50 Shiroko kernel: scsi host9: usb-storage 3-1.8:1.0
Nov 27 22:19:50 Shiroko kernel: usbcore: registered new interface driver usb-storage
Nov 27 22:19:50 Shiroko kernel: usbcore: registered new interface driver uas
Nov 27 22:19:50 Shiroko kernel: tg3 0000:0c:00.0 enp12s0: renamed from eth0
Nov 27 22:19:50 Shiroko kernel: input: Sony PLAYSTATION(R)3 Controller Motion Sensors as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.3/3-1.3.3:1.0/0003:054C:0268.000A/input/input28
Nov 27 22:19:50 Shiroko kernel: input: Sony PLAYSTATION(R)3 Controller as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.3/3-1.3.3:1.0/0003:054C:0268.000A/input/input27
Nov 27 22:19:50 Shiroko kernel: sony 0003:054C:0268.000A: input,hiddev3,hidraw7: USB HID v81.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-0000:00:1d.0-1.3.3/input0
Nov 27 22:19:50 Shiroko kernel: input: Sony PLAYSTATION(R)3 Controller Motion Sensors as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.4/3-1.3.4:1.0/0003:054C:0268.000B/input/input30
Nov 27 22:19:50 Shiroko kernel: tda9887 7-0043: creating new instance
Nov 27 22:19:50 Shiroko kernel: tda9887 7-0043: tda988[5/6/7] found
Nov 27 22:19:50 Shiroko kernel: tuner: 7-0043: Tuner 74 found with type(s) Radio TV.
Nov 27 22:19:50 Shiroko kernel: input: Sony PLAYSTATION(R)3 Controller as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.4/3-1.3.4:1.0/0003:054C:0268.000B/input/input29
Nov 27 22:19:50 Shiroko kernel: sony 0003:054C:0268.000B: input,hiddev4,hidraw8: USB HID v81.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-0000:00:1d.0-1.3.4/input0
Nov 27 22:19:50 Shiroko kernel: tea5767: All bytes are equal. It is not a TEA5767
Nov 27 22:19:50 Shiroko kernel: tuner: 7-0060: Tuner -1 found with type(s) Radio TV.
Nov 27 22:19:50 Shiroko kernel: upd64031a 7-0012: chip found @ 0x24 (ivtv i2c driver #0)
Nov 27 22:19:50 Shiroko kernel: earth_pt3 0000:08:00.0: successfully init'ed PT3 (fw:0x04, I/F:0x01)
Nov 27 22:19:50 Shiroko kernel: upd64083 7-005c: chip found @ 0xb8 (ivtv i2c driver #0)
Nov 27 22:19:50 Shiroko kernel: FPGA manager framework
Nov 27 22:19:50 Shiroko kernel: wm8739 7-001a: chip found @ 0x34 (ivtv i2c driver #0)
Nov 27 22:19:50 Shiroko kernel: vp27smpx 7-005b: chip found @ 0xb6 (ivtv i2c driver #0)
Nov 27 22:19:50 Shiroko kernel: tuner-simple 7-0060: creating new instance
Nov 27 22:19:50 Shiroko kernel: tuner-simple 7-0060: type set to 46 (Panasonic VP27s/ENGE4324D)
Nov 27 22:19:50 Shiroko kernel: ivtv0: Registered device video0 for encoder MPG (4096 kB)
Nov 27 22:19:50 Shiroko kernel: ivtv0: Registered device video32 for encoder YUV (2048 kB)
Nov 27 22:19:50 Shiroko kernel: ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
Nov 27 22:19:50 Shiroko kernel: ivtv0: Registered device video24 for encoder PCM (320 kB)
Nov 27 22:19:50 Shiroko kernel: ivtv0: Initialized card: I/O Data GV-MVP/RX, GV-MVP/RX2W (dual tuner)
Nov 27 22:19:50 Shiroko kernel: ivtv: End initialization
Nov 27 22:19:50 Shiroko kernel: ivtv_alsa: ivtv-alsa: module loading...
Nov 27 22:19:50 Shiroko kernel: ivtv_alsa: ivtv0-alsa: snd_ivtv_init: Instance 0 registered as ALSA card 1
Nov 27 22:19:47 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:47 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:47 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:48 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:49 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-networkd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:50 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:50 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:49 Shiroko mtp-probe[422]: checking bus 3, device 3: "/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1"
Nov 27 22:19:47 Shiroko systemd-modules-load[370]: Inserted module 'vhba'
Nov 27 22:19:49 Shiroko mtp-probe[421]: checking bus 3, device 6: "/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.4"
Nov 27 22:19:47 Shiroko systemd-modules-load[370]: Inserted module 'sg'
Nov 27 22:19:49 Shiroko mtp-probe[424]: checking bus 3, device 8: "/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.1"
Nov 27 22:19:47 Shiroko systemd[1]: Activated swap /resume.swp.
-- Subject: Unit resume.swp.swap has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit resume.swp.swap has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:49 Shiroko mtp-probe[456]: checking bus 3, device 11: "/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.4"
Nov 27 22:19:47 Shiroko systemd[1]: Reached target Swap.
-- Subject: Unit swap.target has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit swap.target has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:49 Shiroko mtp-probe[454]: checking bus 3, device 10: "/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.3"
Nov 27 22:19:47 Shiroko systemd[1]: Mounting Temporary Directory (/tmp)...
-- Subject: Unit tmp.mount has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit tmp.mount has begun starting up.
Nov 27 22:19:49 Shiroko mtp-probe[429]: checking bus 3, device 9: "/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.2"
Nov 27 22:19:47 Shiroko systemd[1]: Mounted Temporary Directory (/tmp).
-- Subject: Unit tmp.mount has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit tmp.mount has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:49 Shiroko mtp-probe[423]: checking bus 3, device 7: "/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8"
Nov 27 22:19:47 Shiroko systemd-modules-load[370]: Inserted module 'msr'
Nov 27 22:19:49 Shiroko mtp-probe[422]: bus: 3, device: 3 was not an MTP device
Nov 27 22:19:47 Shiroko systemd[1]: Started Load Kernel Modules.
-- Subject: Unit systemd-modules-load.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-modules-load.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:49 Shiroko mtp-probe[424]: bus: 3, device: 8 was not an MTP device
Nov 27 22:19:47 Shiroko systemd[1]: Starting Apply Kernel Variables...
-- Subject: Unit systemd-sysctl.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-sysctl.service has begun starting up.
Nov 27 22:19:49 Shiroko mtp-probe[454]: bus: 3, device: 10 was not an MTP device
Nov 27 22:19:47 Shiroko systemd[1]: Mounting Kernel Configuration File System...
-- Subject: Unit sys-kernel-config.mount has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit sys-kernel-config.mount has begun starting up.
Nov 27 22:19:49 Shiroko mtp-probe[423]: bus: 3, device: 7 was not an MTP device
Nov 27 22:19:47 Shiroko systemd[1]: Mounted Kernel Configuration File System.
-- Subject: Unit sys-kernel-config.mount has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit sys-kernel-config.mount has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:49 Shiroko mtp-probe[429]: bus: 3, device: 9 was not an MTP device
Nov 27 22:19:47 Shiroko systemd[1]: Started Apply Kernel Variables.
-- Subject: Unit systemd-sysctl.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-sysctl.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:49 Shiroko mtp-probe[456]: bus: 3, device: 11 was not an MTP device
Nov 27 22:19:47 Shiroko systemd[1]: Started Create Static Device Nodes in /dev.
-- Subject: Unit systemd-tmpfiles-setup-dev.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-tmpfiles-setup-dev.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:49 Shiroko mtp-probe[421]: bus: 3, device: 6 was not an MTP device
Nov 27 22:19:47 Shiroko systemd[1]: Starting udev Kernel Device Manager...
-- Subject: Unit systemd-udevd.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-udevd.service has begun starting up.
Nov 27 22:19:47 Shiroko systemd[1]: Reached target Local File Systems (Pre).
-- Subject: Unit local-fs-pre.target has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit local-fs-pre.target has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:47 Shiroko systemd[1]: home-zombie-Sources-PKGBUILD-buildchroot-zombie-mnt-pgo.mount: Directory /home/zombie/Sources/PKGBUILD/buildchroot/zombie/mnt/pgo to mount over is not empty, mounting anyway.
-- Subject: Mount point is not empty
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- The directory /home/zombie/Sources/PKGBUILD/buildchroot/zombie/mnt/pgo is specified as the mount point (second field in
-- /etc/fstab or Where= field in systemd unit file) and is not empty.
-- This does not interfere with mounting, but the pre-exisiting files in
-- this directory become inaccessible. To see those over-mounted files,
-- please manually mount the underlying file system to a secondary
-- location.
Nov 27 22:19:47 Shiroko systemd[1]: Mounting /home/zombie/Sources/PKGBUILD/buildchroot/zombie/mnt/pgo...
-- Subject: Unit home-zombie-Sources-PKGBUILD-buildchroot-zombie-mnt-pgo.mount has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit home-zombie-Sources-PKGBUILD-buildchroot-zombie-mnt-pgo.mount has begun starting up.
Nov 27 22:19:47 Shiroko systemd[1]: Mounted /home/zombie/Sources/PKGBUILD/buildchroot/zombie/mnt/pgo.
-- Subject: Unit home-zombie-Sources-PKGBUILD-buildchroot-zombie-mnt-pgo.mount has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit home-zombie-Sources-PKGBUILD-buildchroot-zombie-mnt-pgo.mount has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:48 Shiroko systemd[1]: Started udev Kernel Device Manager.
-- Subject: Unit systemd-udevd.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-udevd.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:48 Shiroko systemd[1]: Starting Network Service...
-- Subject: Unit systemd-networkd.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-networkd.service has begun starting up.
Nov 27 22:19:49 Shiroko [417]: failed to execute '/usr/bin/hdparm' '/usr/bin/hdparm -B 1 -M 128 /dev/sde': No such file or directory
Nov 27 22:19:49 Shiroko systemd-udevd[397]: Process '/usr/bin/hdparm -B 1 -M 128 /dev/sde' failed with exit code 2.
Nov 27 22:19:49 Shiroko systemd-udevd[397]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1c.4/0000:03:00.0/ata8/host7/target7:0:0/7:0:0:0/block/sde/sde1/bdi/read_ahead_kb} for writing: No such file or directory
Nov 27 22:19:49 Shiroko systemd-networkd[388]: Enumeration completed
Nov 27 22:19:49 Shiroko systemd[1]: Started Network Service.
-- Subject: Unit systemd-networkd.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-networkd.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:49 Shiroko systemd-networkd[388]: lo: Removing non-existent address: ::1/128 (valid forever), ignoring
Nov 27 22:19:49 Shiroko systemd[1]: Starting Wait for Network to be Configured...
-- Subject: Unit systemd-networkd-wait-online.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-networkd-wait-online.service has begun starting up.
Nov 27 22:19:49 Shiroko systemd[1]: Reached target Network.
-- Subject: Unit network.target has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit network.target has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:49 Shiroko [453]: failed to execute '/usr/bin/hdparm' '/usr/bin/hdparm -B 1 -M 128 /dev/sdb': No such file or directory
Nov 27 22:19:49 Shiroko systemd-udevd[390]: Process '/usr/bin/hdparm -B 1 -M 128 /dev/sdb' failed with exit code 2.
Nov 27 22:19:49 Shiroko [455]: failed to execute '/usr/bin/hdparm' '/usr/bin/hdparm -B 1 -M 128 /dev/sda': No such file or directory
Nov 27 22:19:49 Shiroko systemd-udevd[392]: Process '/usr/bin/hdparm -B 1 -M 128 /dev/sda' failed with exit code 2.
Nov 27 22:19:49 Shiroko systemd-networkd-wait-online[430]: ignoring: lo
Nov 27 22:19:49 Shiroko [460]: failed to execute '/usr/bin/hdparm' '/usr/bin/hdparm -B 1 -M 128 /dev/sdc': No such file or directory
Nov 27 22:19:49 Shiroko systemd-udevd[399]: Process '/usr/bin/hdparm -B 1 -M 128 /dev/sdc' failed with exit code 2.
Nov 27 22:19:49 Shiroko systemd-udevd[403]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Nov 27 22:19:49 Shiroko systemd-networkd-wait-online[430]: ignoring: lo
Nov 27 22:19:49 Shiroko systemd-udevd[392]: error opening ATTR{/sys/devices/platform/vhba/host8/scsi_host/host8/link_power_management_policy} for writing: Permission denied
Nov 27 22:19:50 Shiroko [494]: failed to execute '/usr/bin/hdparm' '/usr/bin/hdparm -B 1 -M 128 /dev/sdd': No such file or directory
Nov 27 22:19:50 Shiroko systemd-udevd[405]: Process '/usr/bin/hdparm -B 1 -M 128 /dev/sdd' failed with exit code 2.
Nov 27 22:19:50 Shiroko systemd-udevd[405]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Nov 27 22:19:50 Shiroko systemd-networkd-wait-online[430]: ignoring: lo
Nov 27 22:19:50 Shiroko systemd-networkd[388]: eth0: Interface name change detected, eth0 has been renamed to enp12s0.
Nov 27 22:19:50 Shiroko [500]: failed to execute '/usr/sbin/ethtool' '/usr/sbin/ethtool -s eth0 wol d': No such file or directory
Nov 27 22:19:50 Shiroko systemd-udevd[405]: Process '/usr/sbin/ethtool -s eth0 wol d' failed with exit code 2.
Nov 27 22:19:50 Shiroko systemd-networkd[388]: enp12s0: IPv6 successfully disabled
Nov 27 22:19:50 Shiroko systemd-networkd-wait-online[430]: ignoring: lo
Nov 27 22:19:50 Shiroko systemd-networkd-wait-online[430]: ignoring: lo
Nov 27 22:19:50 Shiroko systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
-- Subject: Unit systemd-rfkill.socket has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-rfkill.socket has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:50 Shiroko systemd[1]: Starting Load/Save RF Kill Switch Status...
-- Subject: Unit systemd-rfkill.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-rfkill.service has begun starting up.
Nov 27 22:19:50 Shiroko systemd-udevd[403]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8:1.0/host9/scsi_host/host9/link_power_management_policy} for writing: Permission denied
Nov 27 22:19:50 Shiroko systemd[1]: Started Load/Save RF Kill Switch Status.
-- Subject: Unit systemd-rfkill.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-rfkill.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:50 Shiroko systemd[1]: Started Flush Journal to Persistent Storage.
-- Subject: Unit systemd-journal-flush.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-journal-flush.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:50 Shiroko systemd-networkd-wait-online[430]: ignoring: lo
Nov 27 22:19:50 Shiroko systemd-networkd-wait-online[430]: ignoring: lo
Nov 27 22:19:50 Shiroko systemd-networkd-wait-online[430]: ignoring: lo
Nov 27 22:19:50 Shiroko systemd-udevd[395]: error opening ATTR{/sys/devices/virtual/block/md126/md126p2/bdi/read_ahead_kb} for writing: No such file or directory
Nov 27 22:19:50 Shiroko systemd-udevd[389]: Process '/usr/bin/alsactl restore 0' failed with exit code 99.
Nov 27 22:19:50 Shiroko kernel: intel_rapl: Found RAPL domain package
Nov 27 22:19:50 Shiroko kernel: intel_rapl: Found RAPL domain core
Nov 27 22:19:50 Shiroko kernel: intel_rapl: Found RAPL domain uncore
Nov 27 22:19:50 Shiroko systemd-udevd[399]: error opening ATTR{/sys/devices/virtual/block/md126/md126p1/bdi/read_ahead_kb} for writing: No such file or directory
Nov 27 22:19:50 Shiroko systemd[1]: Found device /dev/disk/by-uuid/4876-3A72.
-- Subject: Unit dev-disk-by\x2duuid-4876\x2d3A72.device has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit dev-disk-by\x2duuid-4876\x2d3A72.device has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:50 Shiroko systemd[1]: Starting File System Check on /dev/disk/by-uuid/4876-3A72...
-- Subject: Unit systemd-fsck@dev-disk-by\x2duuid-4876\x2d3A72.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-fsck@dev-disk-by\x2duuid-4876\x2d3A72.service has begun starting up.
Nov 27 22:19:51 Shiroko systemd[1]: Started File System Check on /dev/disk/by-uuid/4876-3A72.
-- Subject: Unit systemd-fsck@dev-disk-by\x2duuid-4876\x2d3A72.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-fsck@dev-disk-by\x2duuid-4876\x2d3A72.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:51 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-4876\x2d3A72 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:51 Shiroko systemd[1]: Mounting /boot...
-- Subject: Unit boot.mount has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit boot.mount has begun starting up.
Nov 27 22:19:51 Shiroko kernel: scsi 9:0:0:0: Direct-Access     Generic  Compact Flash    0.00 PQ: 0 ANSI: 2
Nov 27 22:19:51 Shiroko kernel: scsi 9:0:0:1: Direct-Access     Generic  xD-Picture       0.00 PQ: 0 ANSI: 2
Nov 27 22:19:51 Shiroko kernel: scsi 9:0:0:2: Direct-Access     Generic  SDXC/MMC         0.00 PQ: 0 ANSI: 2
Nov 27 22:19:51 Shiroko kernel: scsi 9:0:0:3: Direct-Access     Generic  MS/MS-Pro/HG     0.00 PQ: 0 ANSI: 2
Nov 27 22:19:51 Shiroko kernel: sd 9:0:0:0: Attached scsi generic sg6 type 0
Nov 27 22:19:51 Shiroko kernel: sd 9:0:0:1: Attached scsi generic sg7 type 0
Nov 27 22:19:51 Shiroko kernel: sd 9:0:0:2: Attached scsi generic sg8 type 0
Nov 27 22:19:51 Shiroko kernel: sd 9:0:0:3: Attached scsi generic sg9 type 0
Nov 27 22:19:51 Shiroko kernel: sd 9:0:0:0: [sdf] Attached SCSI removable disk
Nov 27 22:19:51 Shiroko kernel: sd 9:0:0:1: [sdg] Attached SCSI removable disk
Nov 27 22:19:51 Shiroko kernel: sd 9:0:0:2: [sdh] Attached SCSI removable disk
Nov 27 22:19:51 Shiroko kernel: sd 9:0:0:3: [sdi] Attached SCSI removable disk
Nov 27 22:19:51 Shiroko [573]: failed to execute '/usr/bin/hdparm' '/usr/bin/hdparm -B 1 -M 128 /dev/sdi': No such file or directory
Nov 27 22:19:51 Shiroko systemd-udevd[411]: Process '/usr/bin/hdparm -B 1 -M 128 /dev/sdi' failed with exit code 2.
Nov 27 22:19:51 Shiroko [574]: failed to execute '/usr/bin/hdparm' '/usr/bin/hdparm -B 1 -M 128 /dev/sdh': No such file or directory
Nov 27 22:19:51 Shiroko systemd-udevd[401]: Process '/usr/bin/hdparm -B 1 -M 128 /dev/sdh' failed with exit code 2.
Nov 27 22:19:51 Shiroko [575]: failed to execute '/usr/bin/hdparm' '/usr/bin/hdparm -B 1 -M 128 /dev/sdf': No such file or directory
Nov 27 22:19:51 Shiroko systemd-udevd[392]: Process '/usr/bin/hdparm -B 1 -M 128 /dev/sdf' failed with exit code 2.
Nov 27 22:19:51 Shiroko [576]: failed to execute '/usr/bin/hdparm' '/usr/bin/hdparm -B 1 -M 128 /dev/sdg': No such file or directory
Nov 27 22:19:51 Shiroko systemd-udevd[406]: Process '/usr/bin/hdparm -B 1 -M 128 /dev/sdg' failed with exit code 2.
Nov 27 22:19:51 Shiroko systemd[1]: Mounted /boot.
-- Subject: Unit boot.mount has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit boot.mount has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:51 Shiroko systemd[1]: Reached target Local File Systems.
-- Subject: Unit local-fs.target has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit local-fs.target has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:51 Shiroko systemd-udevd[399]: error opening ATTR{/sys/devices/virtual/block/md126/md126p1/bdi/read_ahead_kb} for writing: No such file or directory
Nov 27 22:19:51 Shiroko systemd[1]: Starting Create Volatile Files and Directories...
-- Subject: Unit systemd-tmpfiles-setup.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-tmpfiles-setup.service has begun starting up.
Nov 27 22:19:51 Shiroko kernel: ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Nov 27 22:19:51 Shiroko systemd[1]: Started Create Volatile Files and Directories.
-- Subject: Unit systemd-tmpfiles-setup.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-tmpfiles-setup.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:51 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:51 Shiroko systemd[1]: Starting Security Auditing Service...
-- Subject: Unit auditd.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit auditd.service has begun starting up.
Nov 27 22:19:51 Shiroko systemd[1]: Started LVM2 metadata daemon.
-- Subject: Unit lvm2-lvmetad.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit lvm2-lvmetad.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:51 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:51 Shiroko kernel: ivtv0: Encoder revision: 0x02060039
Nov 27 22:19:51 Shiroko lvm[362]:   /dev/sdf: open failed: No medium found
Nov 27 22:19:51 Shiroko lvm[362]:   /dev/sdg: open failed: No medium found
Nov 27 22:19:51 Shiroko lvm[362]:   /dev/sdh: open failed: No medium found
Nov 27 22:19:51 Shiroko lvm[362]:   /dev/sdi: open failed: No medium found
Nov 27 22:19:51 Shiroko auditd[583]: Started dispatcher: /usr/bin/audispd pid: 585
Nov 27 22:19:51 Shiroko audit: CONFIG_CHANGE audit_enabled=1 old=1 auid=4294967295 ses=4294967295 res=1
Nov 27 22:19:51 Shiroko audit: CONFIG_CHANGE audit_pid=583 old=0 auid=4294967295 ses=4294967295 res=1
Nov 27 22:19:51 Shiroko auditd[583]: Init complete, auditd 2.8.4 listening for events (startup state enable)
Nov 27 22:19:51 Shiroko augenrules[587]: /usr/bin/augenrules: No rules directory - /etc/audit/rules.d
Nov 27 22:19:51 Shiroko auditctl[590]: file /etc/audit/audit.rules doesn't exist, skipping
Nov 27 22:19:51 Shiroko systemd[1]: Started Security Auditing Service.
-- Subject: Unit auditd.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit auditd.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:51 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=auditd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:51 Shiroko systemd[1]: Starting Update UTMP about System Boot/Shutdown...
-- Subject: Unit systemd-update-utmp.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-update-utmp.service has begun starting up.
Nov 27 22:19:52 Shiroko audit[592]: SYSTEM_BOOT pid=592 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:52 Shiroko audispd[585]: No plugins found, exiting
Nov 27 22:19:52 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:52 Shiroko auditd[583]: dispatcher 585 reaped
Nov 27 22:19:52 Shiroko systemd[1]: Started Update UTMP about System Boot/Shutdown.
-- Subject: Unit systemd-update-utmp.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-update-utmp.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko systemd[1]: Reached target System Initialization.
-- Subject: Unit sysinit.target has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit sysinit.target has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko systemd[1]: Listening on CUPS Scheduler.
-- Subject: Unit org.cups.cupsd.socket has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit org.cups.cupsd.socket has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko systemd[1]: Listening on PC/SC Smart Card Daemon Activation Socket.
-- Subject: Unit pcscd.socket has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit pcscd.socket has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko systemd[1]: dnscrypt-proxy.socket: TCP_DEFER_ACCEPT failed: Protocol not available
Nov 27 22:19:52 Shiroko systemd[1]: dnscrypt-proxy.socket: TCP_NODELAY failed: Protocol not available
Nov 27 22:19:52 Shiroko systemd[1]: Listening on DNSCrypt-proxy socket.
-- Subject: Unit dnscrypt-proxy.socket has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit dnscrypt-proxy.socket has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko systemd[1]: Started Daily verification of password and group files.
-- Subject: Unit shadow.timer has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit shadow.timer has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko systemd[1]: Started Daily rotation of log files.
-- Subject: Unit logrotate.timer has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit logrotate.timer has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko systemd[1]: Started Daily Cleanup of Temporary Directories.
-- Subject: Unit systemd-tmpfiles-clean.timer has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-tmpfiles-clean.timer has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko systemd[1]: Started CUPS Scheduler.
-- Subject: Unit org.cups.cupsd.path has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit org.cups.cupsd.path has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko systemd[1]: Reached target Paths.
-- Subject: Unit paths.target has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit paths.target has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko systemd[1]: Listening on sshd.socket.
-- Subject: Unit sshd.socket has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit sshd.socket has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko systemd[1]: Listening on D-Bus System Message Bus Socket.
-- Subject: Unit dbus.socket has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit dbus.socket has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko systemd[1]: Reached target Sockets.
-- Subject: Unit sockets.target has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit sockets.target has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko systemd[1]: Reached target Basic System.
-- Subject: Unit basic.target has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit basic.target has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko systemd[1]: Starting Invisible Internet Project...
-- Subject: Unit i2prouter.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit i2prouter.service has begun starting up.
Nov 27 22:19:52 Shiroko systemd[1]: Starting Permit User Sessions...
-- Subject: Unit systemd-user-sessions.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-user-sessions.service has begun starting up.
Nov 27 22:19:52 Shiroko systemd[1]: Started Anonymizing Overlay Network.
-- Subject: Unit tor.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit tor.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=tor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:52 Shiroko systemd[1]: Started Throttle Cut.
-- Subject: Unit throttle-cut.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit throttle-cut.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=throttle-cut comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:52 Shiroko systemd[1]: Starting CUPS Scheduler...
-- Subject: Unit org.cups.cupsd.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit org.cups.cupsd.service has begun starting up.
Nov 27 22:19:52 Shiroko systemd[1]: Starting Save/Restore Sound Card State...
-- Subject: Unit alsa-restore.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit alsa-restore.service has begun starting up.
Nov 27 22:19:52 Shiroko systemd[1]: Starting Initialize hardware monitoring sensors...
-- Subject: Unit lm_sensors.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit lm_sensors.service has begun starting up.
Nov 27 22:19:52 Shiroko systemd[1]: Starting Bluetooth service...
-- Subject: Unit bluetooth.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit bluetooth.service has begun starting up.
Nov 27 22:19:52 Shiroko systemd[1]: Starting Login Service...
-- Subject: Unit systemd-logind.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-logind.service has begun starting up.
Nov 27 22:19:52 Shiroko systemd[1]: Started D-Bus System Message Bus.
-- Subject: Unit dbus.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit dbus.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:52 Shiroko systemd[1]: Started Daily man-db cache update.
-- Subject: Unit man-db.timer has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit man-db.timer has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko systemd[1]: Reached target Timers.
-- Subject: Unit timers.target has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit timers.target has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko systemd[1]: Started Permit User Sessions.
-- Subject: Unit systemd-user-sessions.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-user-sessions.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:52 Shiroko systemd[1]: Started Save/Restore Sound Card State.
-- Subject: Unit alsa-restore.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit alsa-restore.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=alsa-restore comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:52 Shiroko systemd[1]: Reached target Sound Card.
-- Subject: Unit sound.target has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit sound.target has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:52 Shiroko systemd[1]: Starting Light Display Manager...
-- Subject: Unit lightdm.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit lightdm.service has begun starting up.
Nov 27 22:19:52 Shiroko kernel: nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290
Nov 27 22:19:52 Shiroko systemd-networkd-wait-online[430]: ignoring: lo
Nov 27 22:19:52 Shiroko kernel: tg3 0000:0c:00.0 enp12s0: Link is up at 100 Mbps, full duplex
Nov 27 22:19:52 Shiroko kernel: tg3 0000:0c:00.0 enp12s0: Flow control is on for TX and on for RX
Nov 27 22:19:52 Shiroko kernel: tg3 0000:0c:00.0 enp12s0: EEE is disabled
Nov 27 22:19:52 Shiroko systemd-networkd[388]: enp12s0: Gained carrier
Nov 27 22:19:52 Shiroko systemd-networkd-wait-online[430]: ignoring: lo
Nov 27 22:19:52 Shiroko systemd-networkd-wait-online[430]: ignoring: lo
Nov 27 22:19:52 Shiroko systemd-logind[604]: New seat seat0.
-- Subject: A new seat seat0 is now available
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: https://www.freedesktop.org/wiki/Software/systemd/multiseat
-- 
-- A new seat seat0 has been configured and is now available.
Nov 27 22:19:52 Shiroko systemd-logind[604]: Watching system buttons on /dev/input/event1 (Power Button)
Nov 27 22:19:52 Shiroko systemd-logind[604]: Watching system buttons on /dev/input/event0 (Power Button)
Nov 27 22:19:52 Shiroko bluetoothd[603]: Bluetooth daemon 5.50
Nov 27 22:19:52 Shiroko systemd-logind[604]: Watching system buttons on /dev/input/event5 (Logitech K270)
Nov 27 22:19:52 Shiroko systemd-logind[604]: Watching system buttons on /dev/input/event3 (Logitech K270)
Nov 27 22:19:53 Shiroko bluetoothd[603]: Starting SDP server
Nov 27 22:19:53 Shiroko systemd[1]: Started Login Service.
-- Subject: Unit systemd-logind.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-logind.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:53 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:53 Shiroko systemd[1]: Started Bluetooth service.
-- Subject: Unit bluetooth.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit bluetooth.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:53 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:53 Shiroko systemd[1]: Reached target Bluetooth.
-- Subject: Unit bluetooth.target has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit bluetooth.target has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:53 Shiroko systemd[1]: Started Light Display Manager.
-- Subject: Unit lightdm.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit lightdm.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:53 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:53 Shiroko bluetoothd[603]: Bluetooth management interface 1.14 initialized
Nov 27 22:19:53 Shiroko dbus-daemon[605]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.5' (uid=0 pid=603 comm="/usr/lib/bluetooth/bluetoothd ")
Nov 27 22:19:53 Shiroko kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Nov 27 22:19:53 Shiroko kernel: Bluetooth: BNEP filters: protocol multicast
Nov 27 22:19:53 Shiroko kernel: Bluetooth: BNEP socket layer initialized
Nov 27 22:19:53 Shiroko dbus-daemon[605]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.service' requested by ':1.6' (uid=0 pid=606 comm="/usr/bin/lightdm ")
Nov 27 22:19:53 Shiroko systemd[1]: Started Initialize hardware monitoring sensors.
-- Subject: Unit lm_sensors.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit lm_sensors.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:53 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lm_sensors comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:53 Shiroko systemd[1]: Reached target User and Group Name Lookups.
-- Subject: Unit nss-user-lookup.target has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit nss-user-lookup.target has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:53 Shiroko systemd[1]: Starting Accounts Service...
-- Subject: Unit accounts-daemon.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit accounts-daemon.service has begun starting up.
Nov 27 22:19:53 Shiroko systemd[1]: Starting Hostname Service...
-- Subject: Unit systemd-hostnamed.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-hostnamed.service has begun starting up.
Nov 27 22:19:53 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:54 Shiroko tor[598]: Nov 27 22:19:54.044 [notice] Tor 0.3.4.9 (git-4ac3ccf2863b86e7) running on Linux with Libevent 2.1.8-stable, OpenSSL 1.1.1, Zlib 1.2.11, Liblzma 5.2.4, and Libzstd 1.3.7.
Nov 27 22:19:54 Shiroko tor[598]: Nov 27 22:19:54.044 [notice] Tor can't help you if you use it wrong! Learn how to be safe at https://www.torproject.org/download/download#warning
Nov 27 22:19:54 Shiroko tor[598]: Nov 27 22:19:54.044 [warn] Tor was compiled with zstd 1.3.6, but is running with zstd 1.3.7. For safety, we'll avoid using advanced zstd functionality.
Nov 27 22:19:54 Shiroko tor[598]: Nov 27 22:19:54.111 [notice] Read configuration file "/etc/tor/torrc".
Nov 27 22:19:54 Shiroko tor[598]: Nov 27 22:19:54.116 [notice] Scheduler type KIST has been enabled.
Nov 27 22:19:54 Shiroko tor[598]: Nov 27 22:19:54.116 [notice] Opening Socks listener on 127.0.0.1:9050
Nov 27 22:19:53 Shiroko dbus-daemon[605]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 27 22:19:53 Shiroko systemd[1]: Started Hostname Service.
-- Subject: Unit systemd-hostnamed.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit systemd-hostnamed.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:54 Shiroko Tor[598]: Tor 0.3.4.9 (git-4ac3ccf2863b86e7) running on Linux with Libevent 2.1.8-stable, OpenSSL 1.1.1, Zlib 1.2.11, Liblzma 5.2.4, and Libzstd 1.3.7.
Nov 27 22:19:54 Shiroko systemd[1]: i2prouter.service: Can't open PID file /run/i2p/i2p.pid (yet?) after start: No such file or directory
Nov 27 22:19:54 Shiroko Tor[598]: Tor can't help you if you use it wrong! Learn how to be safe at https://www.torproject.org/download/download#warning
Nov 27 22:19:54 Shiroko Tor[598]: Tor was compiled with zstd 1.3.6, but is running with zstd 1.3.7. For safety, we'll avoid using advanced zstd functionality.
Nov 27 22:19:54 Shiroko Tor[598]: Read configuration file "/etc/tor/torrc".
Nov 27 22:19:54 Shiroko Tor[598]: Scheduler type KIST has been enabled.
Nov 27 22:19:54 Shiroko Tor[598]: Opening Socks listener on 127.0.0.1:9050
Nov 27 22:19:54 Shiroko dbus-daemon[605]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service' requested by ':1.7' (uid=0 pid=626 comm="/usr/lib/accounts-daemon ")
Nov 27 22:19:54 Shiroko systemd[1]: Starting Authorization Manager...
-- Subject: Unit polkit.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit polkit.service has begun starting up.
Nov 27 22:19:54 Shiroko Tor[598]: Parsing GEOIP IPv4 file /usr/share/tor/geoip.
Nov 27 22:19:54 Shiroko Tor[598]: Parsing GEOIP IPv6 file /usr/share/tor/geoip6.
Nov 27 22:19:54 Shiroko polkitd[635]: Started polkitd version 0.116
Nov 27 22:19:54 Shiroko polkitd[635]: Loading rules from directory /etc/polkit-1/rules.d
Nov 27 22:19:54 Shiroko polkitd[635]: Loading rules from directory /usr/share/polkit-1/rules.d
Nov 27 22:19:54 Shiroko Tor[598]: Bootstrapped 0%: Starting
Nov 27 22:19:55 Shiroko polkitd[635]: Finished loading, compiling and executing 6 rules
Nov 27 22:19:55 Shiroko dbus-daemon[605]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Nov 27 22:19:55 Shiroko systemd[1]: i2prouter.service: Supervising process 685 which is not our child. We'll most likely not notice when it exits.
Nov 27 22:19:55 Shiroko polkitd[635]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
Nov 27 22:19:55 Shiroko accounts-daemon[626]: started daemon version 0.6.54
Nov 27 22:19:55 Shiroko dbus-daemon[605]: [system] Successfully activated service 'org.freedesktop.Accounts'
Nov 27 22:19:55 Shiroko systemd[1]: Started Invisible Internet Project.
-- Subject: Unit i2prouter.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit i2prouter.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:55 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=i2prouter comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:55 Shiroko systemd[1]: Started Authorization Manager.
-- Subject: Unit polkit.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit polkit.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:55 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:55 Shiroko systemd[1]: Started Accounts Service.
-- Subject: Unit accounts-daemon.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit accounts-daemon.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:55 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=accounts-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:55 Shiroko dbus-daemon[605]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service' requested by ':1.11' (uid=0 pid=600 comm="/usr/bin/cupsd -l ")
Nov 27 22:19:55 Shiroko audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:55 Shiroko systemd[1]: Starting Manage, Install and Generate Color Profiles...
-- Subject: Unit colord.service has begun start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit colord.service has begun starting up.
Nov 27 22:19:55 Shiroko Tor[598]: Starting with guard context "default"
Nov 27 22:19:55 Shiroko Tor[598]: Bootstrapped 80%: Connecting to the Tor network
Nov 27 22:19:56 Shiroko dbus-daemon[605]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Nov 27 22:19:56 Shiroko systemd[1]: Started Manage, Install and Generate Color Profiles.
-- Subject: Unit colord.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit colord.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:56 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=colord comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:57 Shiroko colord[719]: failed to get session [pid 600]: No data available
Nov 27 22:19:57 Shiroko systemd[1]: Started CUPS Scheduler.
-- Subject: Unit org.cups.cupsd.service has finished start-up
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit org.cups.cupsd.service has finished starting up.
-- 
-- The start-up result is done.
Nov 27 22:19:57 Shiroko audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=org.cups.cupsd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 27 22:19:58 Shiroko throttle[599]: /usr/bin/throttle: line 104: printf: write error: Input/output error
Nov 27 22:19:58 Shiroko throttle[599]: /usr/bin/throttle: line 104: printf: write error: Input/output error
Nov 27 22:19:58 Shiroko throttle[599]: /usr/bin/throttle: line 104: printf: write error: Input/output error
Nov 27 22:19:58 Shiroko throttle[599]: /usr/bin/throttle: line 104: printf: write error: Input/output error
Nov 27 22:19:58 Shiroko throttle[599]: /usr/bin/throttle: line 104: printf: write error: Input/output error
Nov 27 22:19:58 Shiroko throttle[599]: /usr/bin/throttle: line 104: printf: write error: Input/output error
Nov 27 22:19:58 Shiroko throttle[599]: /usr/bin/throttle: line 104: printf: write error: Input/output error
Nov 27 22:19:58 Shiroko throttle[599]: /usr/bin/throttle: line 104: printf: write error: Input/output error
Nov 27 22:19:58 Shiroko throttle[599]: /usr/bin/throttle: line 104: printf: write error: Input/output error
Nov 27 22:19:58 Shiroko throttle[599]: /usr/bin/throttle: line 104: printf: write error: Input/output error
Nov 27 22:19:58 Shiroko lightdm[1131]: pam_unix(lightdm-greeter:session): session opened for user lightdm by (uid=0)

I resolved some of the udev errors with better rules, but it didn't change my situation.

I was also able to see top after waiting a very, very long time. Nothing was using significant CPU or memory, but It showed several instances of "throttle", which makes no sense as nothing is executing the script multiple times.

The situation seems to be triggered by throttle, which is my own script, being run by my own systemd service. Disabling the throttle service does allow me to boot with with 4.19.x and log in to a functional desktop session.

Line 104 sets block device autosuspend timeouts (/sys/block/*/device/power/autosuspend_delay_ms). This property appears to be broken in 4.19.x kernels. I still need to do testing to be sure this specific line in throttle is the cause of the performance and usability issues  I was having, but I can imagine getting stuck trying to set a hard disk setting causing serious IO problems.

Sorry if I've wasted anyone's time. I really appreciate the advice. It seems like this is (at least partially) my fault as I own the offending script, but perhaps the problem with the script is the result of a kernel bug.

I did look into what may have gone wrong with the kernel, but there are a lot of commits to sort through between 4.18 and 4.19.

drivers/base/power/sysfs.c states:

*    NOTE: The autosuspend_delay_ms attribute and the autosuspend_delay
*    value are used only if the driver calls pm_runtime_use_autosuspend().

I found this call has moved to a different file between 4.18 and 4.19:
diff -u grep-pm_runtime_use_autosuspend.4.{18,19}

--- grep-pm.runtime.use.autosuspend.4.18	2018-11-29 14:37:55.594581538 +0900
+++ grep-pm.runtime.use.autosuspend.4.19	2018-11-29 14:37:44.134581523 +0900
@@ -24,6 +24,7 @@
 ./drivers/bluetooth/hci_intel.c:			pm_runtime_use_autosuspend(&idev->pdev->dev);
 ./drivers/bluetooth/hci_bcm.c:	pm_runtime_use_autosuspend(bdev->dev);
 ./drivers/spi/spi-ti-qspi.c:	pm_runtime_use_autosuspend(&pdev->dev);
+./drivers/spi/spi-sprd.c:	pm_runtime_use_autosuspend(&pdev->dev);
 ./drivers/spi/spi-atmel.c:	pm_runtime_use_autosuspend(&pdev->dev);
 ./drivers/spi/spi-dln2.c:	pm_runtime_use_autosuspend(&pdev->dev);
 ./drivers/spi/spi-fsl-espi.c:	pm_runtime_use_autosuspend(dev);
@@ -39,6 +40,7 @@
 ./drivers/mmc/host/sunxi-mmc.c:	pm_runtime_use_autosuspend(&pdev->dev);
 ./drivers/mmc/host/mmci.c:	pm_runtime_use_autosuspend(&dev->dev);
 ./drivers/mmc/host/dw_mmc-rockchip.c:	pm_runtime_use_autosuspend(&pdev->dev);
+./drivers/mmc/host/sdhci-sprd.c:	pm_runtime_use_autosuspend(&pdev->dev);
 ./drivers/mmc/host/mtk-sd.c:	pm_runtime_use_autosuspend(host->dev);
 ./drivers/mmc/host/sdhci-pxav3.c:	pm_runtime_use_autosuspend(&pdev->dev);
 ./drivers/mmc/host/sdhci-msm.c:	pm_runtime_use_autosuspend(&pdev->dev);
@@ -59,6 +61,7 @@
 ./drivers/i2c/busses/i2c-i801.c:	pm_runtime_use_autosuspend(&dev->dev);
 ./drivers/i2c/busses/i2c-cadence.c:	pm_runtime_use_autosuspend(id->dev);
 ./drivers/i2c/busses/i2c-xiic.c:	pm_runtime_use_autosuspend(i2c->dev);
+./drivers/i2c/busses/i2c-qcom-geni.c:	pm_runtime_use_autosuspend(gi2c->se.dev);
 ./drivers/i2c/busses/i2c-designware-pcidrv.c:	pm_runtime_use_autosuspend(&pdev->dev);
 ./drivers/i2c/busses/i2c-img-scb.c:	pm_runtime_use_autosuspend(&pdev->dev);
 ./drivers/i2c/busses/i2c-davinci.c:	pm_runtime_use_autosuspend(dev->dev);
@@ -70,6 +73,9 @@
 ./drivers/tty/serial/8250/8250_omap.c:	pm_runtime_use_autosuspend(&pdev->dev);
 ./drivers/tty/serial/xilinx_uartps.c:	pm_runtime_use_autosuspend(&pdev->dev);
 ./drivers/crypto/omap-des.c:	pm_runtime_use_autosuspend(dev);
+./drivers/crypto/stm32/stm32-hash.c:	pm_runtime_use_autosuspend(dev);
+./drivers/crypto/stm32/stm32-cryp.c:	pm_runtime_use_autosuspend(dev);
+./drivers/crypto/stm32/stm32_crc32.c:	pm_runtime_use_autosuspend(dev);
 ./drivers/crypto/omap-aes.c:	pm_runtime_use_autosuspend(dev);
 ./drivers/crypto/omap-sham.c:	pm_runtime_use_autosuspend(dev);
 ./drivers/crypto/ccree/cc_pm.c:	pm_runtime_use_autosuspend(dev);
@@ -82,6 +88,7 @@
 ./drivers/misc/mei/pci-txe.c:	pm_runtime_use_autosuspend(&pdev->dev);
 ./drivers/hsi/controllers/omap_ssi_port.c:	pm_runtime_use_autosuspend(omap_port->pdev);
 ./drivers/net/wireless/intel/iwlwifi/pcie/drv.c:		pm_runtime_use_autosuspend(&pdev->dev);
+./drivers/net/wireless/ti/wlcore/main.c:	pm_runtime_use_autosuspend(wl->dev);
 ./drivers/net/wireless/ath/wil6210/pm.c:	pm_runtime_use_autosuspend(dev);
 ./drivers/net/ethernet/freescale/fec_main.c:	pm_runtime_use_autosuspend(&pdev->dev);
 ./drivers/net/ethernet/ti/davinci_mdio.c:	pm_runtime_use_autosuspend(&pdev->dev);
@@ -91,6 +98,9 @@
 ./drivers/base/power/runtime.c:void __pm_runtime_use_autosuspend(struct device *dev, bool use)
 ./drivers/base/power/runtime.c:EXPORT_SYMBOL_GPL(__pm_runtime_use_autosuspend);
 ./drivers/base/power/sysfs.c: *	value are used only if the driver calls pm_runtime_use_autosuspend().
+./drivers/thunderbolt/domain.c:	pm_runtime_use_autosuspend(&tb->dev);
+./drivers/thunderbolt/switch.c:		pm_runtime_use_autosuspend(&sw->dev);
+./drivers/thunderbolt/nhi.c:	pm_runtime_use_autosuspend(&pdev->dev);
 ./drivers/char/hw_random/mtk-rng.c:	pm_runtime_use_autosuspend(&pdev->dev);
 ./drivers/char/hw_random/stm32-rng.c:	pm_runtime_use_autosuspend(dev);
 ./drivers/dma/qcom/hidma.c:	pm_runtime_use_autosuspend(&pdev->dev);
@@ -136,9 +146,11 @@
 ./drivers/iio/gyro/mpu3050-core.c:	pm_runtime_use_autosuspend(dev);
 ./drivers/iio/gyro/bmg160_core.c:	pm_runtime_use_autosuspend(dev);
 ./drivers/iio/proximity/pulsedlight-lidar-lite-v2.c:	pm_runtime_use_autosuspend(&client->dev);
+./drivers/slimbus/qcom-ngd-ctrl.c:	pm_runtime_use_autosuspend(dev);
 ./drivers/slimbus/qcom-ctrl.c:	pm_runtime_use_autosuspend(&pdev->dev);
 ./drivers/input/mouse/cyapa.c:	pm_runtime_use_autosuspend(dev);
 ./drivers/mfd/arizona-core.c:	pm_runtime_use_autosuspend(arizona->dev);
+./drivers/mfd/madera-core.c:	pm_runtime_use_autosuspend(madera->dev);
 ./drivers/mfd/ab8500-gpadc.c:	pm_runtime_use_autosuspend(gpadc->dev);
 Binary file ./.git/objects/pack/pack-fc2eaae68e7a5026afdaeb4c490693d13e067744.pack matches
 ./sound/soc/codecs/cs35l33.c:	pm_runtime_use_autosuspend(&i2c_client->dev);
@@ -150,6 +162,6 @@
 ./sound/soc/amd/acp-pcm-dma.c:	pm_runtime_use_autosuspend(&pdev->dev);
 ./sound/pci/hda/hda_codec.c:		pm_runtime_use_autosuspend(dev);
 ./sound/x86/intel_hdmi_audio.c:	pm_runtime_use_autosuspend(&pdev->dev);
-./block/blk-core.c:	pm_runtime_use_autosuspend(q->dev);
+./block/blk-pm.c:	pm_runtime_use_autosuspend(q->dev);
 ./Documentation/power/runtime_pm.txt:  void pm_runtime_use_autosuspend(struct device *dev);
 ./Documentation/power/runtime_pm.txt:pm_runtime_use_autosuspend() (preferably before registering the device), and

I have yet to narrow down why this is broken or if it is broken for only my hard disk's drivers or across all disk drivers. For sure, my disks support this setting (they sound of a four-disk raid0 spinning down on a timer is unmistakable), and it was usable in earlier kernels. In the mean time, I'll try filing a bug on the kernel bugzilla, but not holding by breath for a fix.

Last edited by quequotion (2018-11-29 07:54:20)

Offline

Board footer

Powered by FluxBB