You are not logged in.

Pages: 1

#1 2019-04-03 08:46:58

Nyxlucifer
Member
Registered: 2019-04-03
Posts: 19

Issue with microphones

So I am pretty new to Linux and all, so it might not be a great issue I have. But here it seems that my headset's mic  is not getting detected by Arch. I tried other headset and it was same. I know that it might be some hardware/driver issues,but is there any way to overcome it? I did tried

2 source(s) available.
  * index: 14
        name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
        driver: <module-alsa-card.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE
        priority: 1030
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.00 ms
        max rewind: 0 KiB
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 0
        configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
        monitor_of: 6
        card: 0 <alsa_card.pci-0000_00_1b.0>
        module: 6
        properties:
                device.description = "Monitor of Built-in Audio Analog Stereo"
                device.class = "monitor"
                alsa.card = "0"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xf7e10000 irq 30"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:1b.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "1e20"
                device.product.name = "7 Series/C216 Chipset Family High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "0"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
    index: 15
        name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
        driver: <module-alsa-card.c>
 flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: RUNNING
        suspend cause: (none)
        priority: 9039
        volume: front-left: 22306 /  34% / -28.08 dB,   front-right: 22306 /  34% / -28.08 dB
                balance 0.00
        base volume: 5206 /   8% / -66.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.39 ms
        max rewind: 0 KiB
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 1
        linked by: 1
        configured latency: 10.00 ms; range is 2.00 .. 2000.00 ms
        card: 0 <alsa_card.pci-0000_00_1b.0>
        module: 6
        properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC270 Analog"
                alsa.id = "ALC270 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "0"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xf7e10000 irq 30"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:1b.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "1e20"
                device.product.name = "7 Series/C216 Chipset Family High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "front:0"
                device.buffering.buffer_size = "352800"
                device.buffering.fragment_size = "176400"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                device.description = "Built-in Audio Analog Stereo"
                alsa.mixer_name = "Realtek ALC270"
                alsa.components = "HDA:10ec0270,1043145d,00100100 HDA:80862806,80860101,00100000"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        ports:
                analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "audio-input-microphone"
        active port: <analog-input-mic>

Output I get from `pacmd list-sources`

Last edited by Nyxlucifer (2019-04-03 09:09:21)

Offline

#2 2019-04-03 08:51:30

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,423

Re: Issue with microphones

Welcome to the boards

Please edit your post and wrap this and future command output in [ code ] tags. https://wiki.archlinux.org/index.php/Co … s_and_code

There's a detected and active microphone, relatively low configured volume, you might want to up that. What are you using to test? Can you post 

sudo fuser -v /dev/snd/*
amixer -c0
pacmd list-source-outputs

during active recording?

Last edited by V1del (2019-04-03 08:53:24)

Offline

#3 2019-04-03 09:13:14

Nyxlucifer
Member
Registered: 2019-04-03
Posts: 19

Re: Issue with microphones

Oops, I am sorry, muscle memory thingy.
Okay so here it is

[nyx@nyxlucifer ~]$ sudo fuser -v /dev/snd/*
                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  nyx         897 F.... pulseaudio
/dev/snd/pcmC0D0c:   nyx         897 F...m pulseaudio
[nyx@nyxlucifer ~]$ amixer -c0
Simple mixer control 'Master',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 87
  Mono: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 87
  Mono:
  Front Left: Playback 87 [100%] [0.00dB] [on]
  Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'Speaker',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 87
  Mono:
  Front Left: Playback 0 [0%] [-65.25dB] [off]
  Front Right: Playback 0 [0%] [-65.25dB] [off]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB]
  Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 0 [0%] [0.00dB]
  Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 31
  Front Left: Capture 31 [100%] [30.00dB] [on]
  Front Right: Capture 31 [100%] [30.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Enabled'
Simple mixer control 'Loopback Mixing',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Disabled'
[nyx@nyxlucifer ~]$ pacmd list-sources outputs
2 source(s) available.
  * index: 14
        name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
        driver: <module-alsa-card.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE
        priority: 1030
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.00 ms
        max rewind: 0 KiB
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 0
        configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
        monitor_of: 6
        card: 0 <alsa_card.pci-0000_00_1b.0>
        module: 6
        properties:
                device.description = "Monitor of Built-in Audio Analog Stereo"
                device.class = "monitor"
                alsa.card = "0"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xf7e10000 irq 30"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:1b.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "1e20"
                device.product.name = "7 Series/C216 Chipset Family High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "0"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
    index: 15
        name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
        driver: <module-alsa-card.c>
        flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: RUNNING
        suspend cause: (none)
        priority: 9039
        volume: front-left: 22306 /  34% / -28.08 dB,   front-right: 22306 /  34% / -28.08 dB
                balance 0.00
        base volume: 5206 /   8% / -66.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.54 ms
        max rewind: 0 KiB
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 1
        linked by: 1
        configured latency: 10.00 ms; range is 2.00 .. 2000.00 ms
        card: 0 <alsa_card.pci-0000_00_1b.0>
        module: 6
        properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC270 Analog"
                alsa.id = "ALC270 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "0"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xf7e10000 irq 30"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:1b.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "1e20"
                device.product.name = "7 Series/C216 Chipset Family High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "front:0"
                device.buffering.buffer_size = "352800"
                device.buffering.fragment_size = "176400"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                device.description = "Built-in Audio Analog Stereo"
                alsa.mixer_name = "Realtek ALC270"
                alsa.components = "HDA:10ec0270,1043145d,00100100 HDA:80862806,80860101,00100000"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        ports:
                analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "audio-input-microphone"
        active port: <analog-input-mic>

And yes, relatively low volume because otherwise others say that background noise is way too high, which is issue for my laptop's mic I guess, that's one reason I wanna use mic of my headset

Last edited by Nyxlucifer (2019-04-03 09:15:52)

Offline

#4 2019-04-04 08:12:34

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,423

Re: Issue with microphones

Ah so your problem is that the internal mic works, but the headset mic doesn't? Which laptop is this exactly? FWIW incidentally, it looks like the 5.0.6 kernel contains a lot of detection fixes for these kinds of issues, so that might be fixed by that.

Offline

#5 2019-04-04 10:25:14

Nyxlucifer
Member
Registered: 2019-04-03
Posts: 19

Re: Issue with microphones

Oh I see, so I need to update right? I have installed it on Asus X551CA

Last edited by Nyxlucifer (2019-04-04 10:26:45)

Offline

#6 2019-04-10 22:07:55

Nyxlucifer
Member
Registered: 2019-04-03
Posts: 19

Re: Issue with microphones

Sorry but I am bumping this post. I was kinda busy with something, and nope, updating kernel didn't seem to help me

Offline

Pages: 1

Board footer

Powered by FluxBB