You are not logged in.

#1 2019-07-22 15:53:31

ChingDim
Member
Registered: 2019-07-22
Posts: 36

Radeon R5 M230 failed when booting, then disabled

This happened for quite a long time and the entire system is fine except this. 
The laptop has 2 gpus: Intel HD 5500 (working) and Radeon R5 M230 (not working)

[chingdim@G5080 ~]$ xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x66 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 4 associated providers: 0 name:modesetting
Provider 1: id: 0x3f cap: 0x0 crtcs: 0 outputs: 0 associated providers: 0 name:modesetting
[chingdim@G5080 ~]$ dmesg -l err
[    0.564533] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GFX0._DSM.ECR1], AE_NOT_FOUND (20190509/psargs-330)
[    0.564539] ACPI Error: Aborting method \_SB.PCI0.GFX0._DSM due to previous error (AE_NOT_FOUND) (20190509/psparse-529)
[    0.852289] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDMA
[    0.852292] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDHC
[    0.923355] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GFX0._DSM.ECR1], AE_NOT_FOUND (20190509/psargs-330)
[    0.923362] ACPI Error: Aborting method \_SB.PCI0.GFX0._DSM due to previous error (AE_NOT_FOUND) (20190509/psparse-529)
[    1.526969] [drm:r600_ring_test [radeon]] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)
[    1.526971] radeon 0000:04:00.0: disabling GPU acceleration
[    4.349637] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GFX0._DSM.ECR1], AE_NOT_FOUND (20190509/psargs-330)
[    4.349649] ACPI Error: Aborting method \_SB.PCI0.GFX0._DSM due to previous error (AE_NOT_FOUND) (20190509/psparse-529)
[    4.683049] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[   14.637161] radeon 0000:04:00.0: No VRAM object for PCIE GART.
[   14.637188] [drm:si_resume [radeon]] *ERROR* si startup failed on resume
[  191.565756] radeon 0000:04:00.0: No VRAM object for PCIE GART.
[  191.565782] [drm:si_resume [radeon]] *ERROR* si startup failed on resume

Offline

#2 2019-07-23 13:53:07

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 7,459

Re: Radeon R5 M230 failed when booting, then disabled

Your card appears to be of the gcn 1st gen family, could be an kernel module problem.

post lspci -k please, also dmesg and/or journal from a boot.


Multi-init booting with apg Openrc and systemd coexisting
Automounting : not needed, i prefer pmount
Aur helpers : makepkg + my own local repo === rarely need them

Offline

#3 2019-07-23 15:42:09

ChingDim
Member
Registered: 2019-07-22
Posts: 36

Re: Radeon R5 M230 failed when booting, then disabled

Thanks for replying!
If I've done something wrong when posting logs please do let me know!

[chingdim@G5080 ~]$ lspci -k
00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)
	Subsystem: Lenovo Broadwell-U Host Bridge -OPI
	Kernel driver in use: bdw_uncore
lspci: Unable to load libkmod resources: error -12
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 5500 (rev 09)
	Subsystem: Lenovo HD Graphics 5500
	Kernel driver in use: i915
00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)
	Subsystem: Lenovo Broadwell-U Audio Controller
	Kernel driver in use: snd_hda_intel
00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03)
	Subsystem: Lenovo Wildcat Point-LP USB xHCI Controller
	Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03)
	Subsystem: Lenovo Wildcat Point-LP MEI Controller
	Kernel driver in use: mei_me
00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03)
	Subsystem: Lenovo Wildcat Point-LP High Definition Audio Controller
	Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #1 (rev e3)
	Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 (rev e3)
	Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #4 (rev e3)
	Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #5 (rev e3)
	Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)
	Subsystem: Lenovo Wildcat Point-LP LPC Controller
	Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03)
	Subsystem: Lenovo Wildcat Point-LP SATA Controller [AHCI Mode]
	Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)
	Subsystem: Lenovo Wildcat Point-LP SMBus Controller
	Kernel driver in use: i801_smbus
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
	Subsystem: Lenovo RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
	Kernel driver in use: r8168
03:00.0 Network controller: Intel Corporation Wireless 3160 (rev 93)
	Subsystem: Intel Corporation Dual Band Wireless AC 3160
	Kernel driver in use: iwlwifi
04:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Sun LE [Radeon HD 8550M / R5 M230]
	Subsystem: Lenovo Sun LE [Radeon HD 8550M / R5 M230]
	Kernel driver in use: radeon

Sorry but I am not sure what you mean by dmesg/journalctl from last boot, do you want my entire boot log from journalctl? But that's huge
I just ran dmesg anyways

[chingdim@G5080 ~]$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x2d, date = 2019-03-07
[    0.000000] Linux version 5.2.1-arch1-1-ARCH (builduser@heftig-55221) (gcc version 9.1.0 (GCC)) #1 SMP PREEMPT Sun Jul 14 14:52:52 UTC 2019
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e996181c-f329-41a0-9db3-8c36b0ed4cd4 rw audit=0 loglevel=3 quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000086000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094e49fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000094e4a000-0x0000000095749fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009574a000-0x000000009c3eefff] usable
[    0.000000] BIOS-e820: [mem 0x000000009c3ef000-0x000000009c5eefff] type 20
[    0.000000] BIOS-e820: [mem 0x000000009c5ef000-0x000000009cddefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009cddf000-0x000000009cf7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000035effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  SMBIOS=0x9c669000  ESRT=0x9c771418  ACPI 2.0=0x9cffe014 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 80E5/Lenovo G50-80, BIOS B0CNA0WW 09/30/2016
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2195.089 MHz processor
[    0.000584] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000586] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000594] last_pfn = 0x35f000 max_arch_pfn = 0x400000000
[    0.000599] MTRR default type: uncachable
[    0.000600] MTRR fixed ranges enabled:
[    0.000602]   00000-9FFFF write-back
[    0.000603]   A0000-BFFFF uncachable
[    0.000604]   C0000-E7FFF write-protect
[    0.000605]   E8000-EFFFF write-combining
[    0.000605]   F0000-FFFFF write-protect
[    0.000606] MTRR variable ranges enabled:
[    0.000608]   0 base 0000000000 mask 7C00000000 write-back
[    0.000609]   1 base 009D000000 mask 7FFF000000 uncachable
[    0.000611]   2 base 009E000000 mask 7FFE000000 uncachable
[    0.000611]   3 base 00A0000000 mask 7FE0000000 uncachable
[    0.000612]   4 base 00C0000000 mask 7FC0000000 uncachable
[    0.000613]   5 disabled
[    0.000614]   6 disabled
[    0.000614]   7 disabled
[    0.000615]   8 disabled
[    0.000616]   9 disabled
[    0.001539] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001748] total RAM covered: 14800M
[    0.002175] Found optimal setting for mtrr clean up
[    0.002177]  gran_size: 64K 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 0G
[    0.003068] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
[    0.003073] last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[    0.013337] esrt: Reserving ESRT space from 0x000000009c771418 to 0x000000009c771450.
[    0.013346] check: Scanning 1 areas for low memory corruption
[    0.013351] Using GB pages for direct mapping
[    0.013354] BRK [0x28f001000, 0x28f001fff] PGTABLE
[    0.013355] BRK [0x28f002000, 0x28f002fff] PGTABLE
[    0.013356] BRK [0x28f003000, 0x28f003fff] PGTABLE
[    0.013391] BRK [0x28f004000, 0x28f004fff] PGTABLE
[    0.013392] BRK [0x28f005000, 0x28f005fff] PGTABLE
[    0.013547] BRK [0x28f006000, 0x28f006fff] PGTABLE
[    0.013590] BRK [0x28f007000, 0x28f007fff] PGTABLE
[    0.013661] BRK [0x28f008000, 0x28f008fff] PGTABLE
[    0.013735] BRK [0x28f009000, 0x28f009fff] PGTABLE
[    0.013776] BRK [0x28f00a000, 0x28f00afff] PGTABLE
[    0.013825] Secure boot could not be determined
[    0.013826] RAMDISK: [mem 0x3625f000-0x37126fff]
[    0.013832] ACPI: Early table checksum verification disabled
[    0.013835] ACPI: RSDP 0x000000009CFFE014 000024 (v02 LENOVO)
[    0.013839] ACPI: XSDT 0x000000009CFCF188 0000D4 (v01 LENOVO CB-01    00000001      01000013)
[    0.013845] ACPI: FACP 0x000000009CFF6000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013851] ACPI: DSDT 0x000000009CFE1000 00FE6B (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013854] ACPI: FACS 0x000000009CF7A000 000040
[    0.013857] ACPI: UEFI 0x000000009CFFC000 000042 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013860] ACPI: ASF! 0x000000009CFFA000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013863] ACPI: BOOT 0x000000009CFF8000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013866] ACPI: LPIT 0x000000009CFF4000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013869] ACPI: MCFG 0x000000009CFF2000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013872] ACPI: SSDT 0x000000009CFDB000 000B74 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013875] ACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013878] ACPI: ASPT 0x000000009CFF9000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013881] ACPI: HPET 0x000000009CFF5000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013884] ACPI: WDAT 0x000000009CFF1000 000224 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013887] ACPI: SSDT 0x000000009CFDC000 000539 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013890] ACPI: MSDM 0x000000009CFFB000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013893] ACPI: APIC 0x000000009CFF3000 00008C (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013896] ACPI: SSDT 0x000000009CFD5000 005AC3 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013899] ACPI: SSDT 0x000000009CFDD000 00342F (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013903] ACPI: DBGP 0x000000009CFF7000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013906] ACPI: SSDT 0x000000009CFD3000 001BF5 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013909] ACPI: DMAR 0x000000009CFD2000 0000F0 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013912] ACPI: CSRT 0x000000009CFD1000 0000C4 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013915] ACPI: FPDT 0x000000009CFD0000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013918] ACPI: BGRT 0x000000009CFCE000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013926] ACPI: Local APIC address 0xfee00000
[    0.014011] No NUMA configuration found
[    0.014013] Faking a node at [mem 0x0000000000000000-0x000000035effffff]
[    0.014016] NODE_DATA(0) allocated [mem 0x35effc000-0x35effffff]
[    0.014043] Zone ranges:
[    0.014044]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.014045]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.014046]   Normal   [mem 0x0000000100000000-0x000000035effffff]
[    0.014047]   Device   empty
[    0.014048] Movable zone start for each node
[    0.014049] Early memory node ranges
[    0.014050]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.014051]   node   0: [mem 0x0000000000059000-0x0000000000085fff]
[    0.014052]   node   0: [mem 0x0000000000100000-0x0000000094e49fff]
[    0.014053]   node   0: [mem 0x000000009574a000-0x000000009c3eefff]
[    0.014053]   node   0: [mem 0x000000009cfff000-0x000000009cffffff]
[    0.014054]   node   0: [mem 0x0000000100000000-0x000000035effffff]
[    0.014166] Zeroed struct page in unavailable ranges: 17804 pages
[    0.014167] Initmem setup node 0 [mem 0x0000000000001000-0x000000035effffff]
[    0.014168] On node 0 totalpages: 3123828
[    0.014170]   DMA zone: 64 pages used for memmap
[    0.014170]   DMA zone: 23 pages reserved
[    0.014171]   DMA zone: 3972 pages, LIFO batch:0
[    0.014231]   DMA32 zone: 9900 pages used for memmap
[    0.014232]   DMA32 zone: 633584 pages, LIFO batch:63
[    0.024375]   Normal zone: 38848 pages used for memmap
[    0.024377]   Normal zone: 2486272 pages, LIFO batch:63
[    0.058664] Reserving Intel graphics memory at [mem 0x9e000000-0x9fffffff]
[    0.058736] ACPI: PM-Timer IO Port: 0x1808
[    0.058737] ACPI: Local APIC address 0xfee00000
[    0.058755] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.058757] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.058759] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.058760] ACPI: IRQ0 used by override.
[    0.058762] ACPI: IRQ9 used by override.
[    0.058764] Using ACPI (MADT) for SMP configuration information
[    0.058765] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.058776] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.058799] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.058801] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.058803] PM: Registered nosave memory: [mem 0x00086000-0x0009ffff]
[    0.058804] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.058805] PM: Registered nosave memory: [mem 0x94e4a000-0x95749fff]
[    0.058807] PM: Registered nosave memory: [mem 0x9c3ef000-0x9c5eefff]
[    0.058808] PM: Registered nosave memory: [mem 0x9c5ef000-0x9cddefff]
[    0.058809] PM: Registered nosave memory: [mem 0x9cddf000-0x9cf7efff]
[    0.058809] PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff]
[    0.058811] PM: Registered nosave memory: [mem 0x9d000000-0x9dffffff]
[    0.058812] PM: Registered nosave memory: [mem 0x9e000000-0x9fffffff]
[    0.058813] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
[    0.058813] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.058814] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.058815] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.058816] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.058816] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.058817] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.058818] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.058818] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.058819] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.058820] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.058820] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.058821] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.058822] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.058824] [mem 0xa0000000-0xdfffffff] available for PCI devices
[    0.058825] Booting paravirtualized kernel on bare hardware
[    0.058828] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.230290] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.230576] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[    0.230584] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[    0.230585] pcpu-alloc: [0] 0 1 2 3 
[    0.230607] Built 1 zonelists, mobility grouping on.  Total pages: 3074993
[    0.230608] Policy zone: Normal
[    0.230610] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e996181c-f329-41a0-9db3-8c36b0ed4cd4 rw audit=0 loglevel=3 quiet
[    0.230655] audit: disabled (until reboot)
[    0.236622] Calgary: detecting Calgary via BIOS EBDA area
[    0.236624] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.270396] Memory: 12134084K/12495312K available (12291K kernel code, 1320K rwdata, 3888K rodata, 1612K init, 2880K bss, 361228K reserved, 0K cma-reserved)
[    0.270537] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.270550] Kernel/User page tables isolation: enabled
[    0.270566] ftrace: allocating 37370 entries in 146 pages
[    0.288318] rcu: Preemptible hierarchical RCU implementation.
[    0.288319] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.288319] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.288320] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.288321] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.288322] 	Tasks RCU enabled.
[    0.288323] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.288324] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.290295] NR_IRQS: 20736, nr_irqs: 728, preallocated irqs: 16
[    0.290471] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.290548] random: get_random_bytes called from start_kernel+0x37e/0x559 with crng_init=0
[    0.290574] Console: colour dummy device 80x25
[    0.290578] printk: console [tty0] enabled
[    0.290600] ACPI: Core revision 20190509
[    0.290894] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.290901] hpet clockevent registered
[    0.290906] APIC: Switch to symmetric I/O mode setup
[    0.290908] DMAR: Host address width 39
[    0.290910] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.290915] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[    0.290916] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.290919] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.290920] DMAR: RMRR base: 0x0000009cd84000 end: 0x0000009cda3fff
[    0.290921] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
[    0.290922] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA
[    0.290923] DMAR: ANDD device: 2 name: \_SB.PCI0.SDHC
[    0.290925] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.290926] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.290926] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.290927] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.291426] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.291427] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.292050] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.307574] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa4138ebe5, max_idle_ns: 440795271013 ns
[    0.307579] Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.10 BogoMIPS (lpj=7316963)
[    0.307581] pid_max: default: 32768 minimum: 301
[    0.310789] LSM: Security Framework initializing
[    0.310793] Yama: becoming mindful.
[    0.313319] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.314598] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.314651] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.314691] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.314853] *** VALIDATE proc ***
[    0.314907] *** VALIDATE cgroup1 ***
[    0.314909] *** VALIDATE cgroup2 ***
[    0.314968] process: using mwait in idle threads
[    0.314971] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.314972] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.314974] Spectre V2 : Mitigation: Full generic retpoline
[    0.314975] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.314975] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.314978] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.314978] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.314980] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.314983] MDS: Mitigation: Clear CPU buffers
[    0.315244] Freeing SMP alternatives memory: 32K
[    0.317659] TSC deadline timer enabled
[    0.317662] smpboot: CPU0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[    0.337584] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.337620] ... version:                3
[    0.337621] ... bit width:              48
[    0.337621] ... generic registers:      4
[    0.337622] ... value mask:             0000ffffffffffff
[    0.337623] ... max period:             00007fffffffffff
[    0.337623] ... fixed-purpose events:   3
[    0.337624] ... event mask:             000000070000000f
[    0.344246] rcu: Hierarchical SRCU implementation.
[    0.367706] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.374252] smp: Bringing up secondary CPUs ...
[    0.414258] x86: Booting SMP configuration:
[    0.414259] .... node  #0, CPUs:      #1 #2
[    0.454737] MDS CPU bug present and SMT on, data leak possible. See [url]https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html[/url] for more details.
[    0.494260]  #3
[    0.494714] smp: Brought up 1 node, 4 CPUs
[    0.494714] smpboot: Max logical packages: 1
[    0.494714] smpboot: Total of 4 processors activated (17567.40 BogoMIPS)
[    0.497907] devtmpfs: initialized
[    0.497907] x86/mm: Memory block size: 128MB
[    0.498687] PM: Registering ACPI NVS region [mem 0x9cddf000-0x9cf7efff] (1703936 bytes)
[    0.498687] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.498687] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.498687] pinctrl core: initialized pinctrl subsystem
[    0.498687] PM: RTC time: 14:54:35, date: 2019-07-21
[    0.498687] NET: Registered protocol family 16
[    0.498687] cpuidle: using governor ladder
[    0.498687] cpuidle: using governor menu
[    0.498687] Simple Boot Flag at 0x44 set to 0x1
[    0.498687] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.498687] ACPI: bus type PCI registered
[    0.498687] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.498687] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.498687] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.498687] PCI: Using configuration type 1 for base access
[    0.498687] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.501366] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.501366] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.501366] ACPI: Added _OSI(Module Device)
[    0.501366] ACPI: Added _OSI(Processor Device)
[    0.501366] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.501366] ACPI: Added _OSI(Processor Aggregator Device)
[    0.501366] ACPI: Added _OSI(Linux-Dell-Video)
[    0.501366] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.501366] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.529479] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.530936] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.532195] ACPI: Dynamic OEM Table Load:
[    0.532204] ACPI: SSDT 0xFFFF9B56D02B8800 0003D3 (v02 PmRef  Cpu0Cst  00003001 INTL 20121220)
[    0.533011] ACPI: Dynamic OEM Table Load:
[    0.533018] ACPI: SSDT 0xFFFF9B56D068D000 0005AA (v02 PmRef  ApIst    00003000 INTL 20121220)
[    0.533885] ACPI: Dynamic OEM Table Load:
[    0.533891] ACPI: SSDT 0xFFFF9B56D0150200 000119 (v02 PmRef  ApCst    00003000 INTL 20121220)
[    0.535547] ACPI: EC: EC started
[    0.535548] ACPI: EC: interrupt blocked
[    0.536789] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.536791] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.536792] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.536793] ACPI: Interpreter enabled
[    0.536840] ACPI: (supports S0 S3 S4 S5)
[    0.536842] ACPI: Using IOAPIC for interrupt routing
[    0.536886] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.537392] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[    0.537406] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.555846] ACPI: Power Resource [PC05] (on)
[    0.561266] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.561273] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.562660] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.562661] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.563736] PCI host bridge to bus 0000:00
[    0.563738] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.563740] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.563741] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.563742] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.563744] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.563745] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.563746] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.563747] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.563748] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.563750] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.563751] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.563752] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.563753] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.563755] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.563756] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.563757] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff window]
[    0.563758] pci_bus 0000:00: root bus resource [mem 0xfe101000-0xfe113fff window]
[    0.563760] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.563768] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[    0.564145] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[    0.564158] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit]
[    0.564165] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.564170] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.564186] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.564533] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GFX0._DSM.ECR1], AE_NOT_FOUND (20190509/psargs-330)
[    0.564539] ACPI Error: Aborting method \_SB.PCI0.GFX0._DSM due to previous error (AE_NOT_FOUND) (20190509/psparse-529)
[    0.564579] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[    0.564591] pci 0000:00:03.0: reg 0x10: [mem 0xd1310000-0xd1313fff 64bit]
[    0.564990] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[    0.565011] pci 0000:00:14.0: reg 0x10: [mem 0xd1300000-0xd130ffff 64bit]
[    0.565073] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.565428] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[    0.565451] pci 0000:00:16.0: reg 0x10: [mem 0xd131a000-0xd131a01f 64bit]
[    0.565523] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.565882] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[    0.565902] pci 0000:00:1b.0: reg 0x10: [mem 0xd1314000-0xd1317fff 64bit]
[    0.565964] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.566314] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[    0.566700] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.567120] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
[    0.567206] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.567633] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[    0.567718] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.568138] pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400
[    0.568221] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.568644] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[    0.569113] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[    0.569129] pci 0000:00:1f.2: reg 0x10: [io  0x5088-0x508f]
[    0.569136] pci 0000:00:1f.2: reg 0x14: [io  0x5094-0x5097]
[    0.569142] pci 0000:00:1f.2: reg 0x18: [io  0x5080-0x5087]
[    0.569149] pci 0000:00:1f.2: reg 0x1c: [io  0x5090-0x5093]
[    0.569156] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
[    0.569163] pci 0000:00:1f.2: reg 0x24: [mem 0xd1318000-0xd13187ff]
[    0.569201] pci 0000:00:1f.2: PME# supported from D3hot
[    0.569548] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[    0.569566] pci 0000:00:1f.3: reg 0x10: [mem 0xd1319000-0xd13190ff 64bit]
[    0.569585] pci 0000:00:1f.3: reg 0x20: [io  0x5040-0x505f]
[    0.570003] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.570081] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.570112] pci 0000:02:00.0: reg 0x10: [io  0x4000-0x40ff]
[    0.570140] pci 0000:02:00.0: reg 0x18: [mem 0xd1204000-0xd1204fff 64bit]
[    0.570158] pci 0000:02:00.0: reg 0x20: [mem 0xd1200000-0xd1203fff 64bit]
[    0.570266] pci 0000:02:00.0: supports D1 D2
[    0.570268] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.570409] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.570412] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.570415] pci 0000:00:1c.2:   bridge window [mem 0xd1200000-0xd12fffff]
[    0.570629] pci 0000:03:00.0: [8086:08b4] type 00 class 0x028000
[    0.570738] pci 0000:03:00.0: reg 0x10: [mem 0xd1100000-0xd1101fff 64bit]
[    0.571059] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.571491] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.571496] pci 0000:00:1c.3:   bridge window [mem 0xd1100000-0xd11fffff]
[    0.571578] pci 0000:04:00.0: [1002:666f] type 00 class 0x038000
[    0.571604] pci 0000:04:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.571616] pci 0000:04:00.0: reg 0x18: [mem 0xd1000000-0xd103ffff 64bit]
[    0.571623] pci 0000:04:00.0: reg 0x20: [io  0x3000-0x30ff]
[    0.571636] pci 0000:04:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.571644] pci 0000:04:00.0: enabling Extended Tags
[    0.571708] pci 0000:04:00.0: supports D1 D2
[    0.571710] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[    0.571738] pci 0000:04:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 32.000 Gb/s with 5 GT/s x8 link)
[    0.571811] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.571814] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.571817] pci 0000:00:1c.4:   bridge window [mem 0xd1000000-0xd10fffff]
[    0.571822] pci 0000:00:1c.4:   bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.573187] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.573264] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.573338] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.573411] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.573484] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.573557] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.573629] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.573702] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.574246] ACPI: EC: interrupt unblocked
[    0.574253] ACPI: EC: event unblocked
[    0.574260] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.574262] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[    0.574356] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.574356] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.574356] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.574356] vgaarb: loaded
[    0.574419] ACPI: bus type USB registered
[    0.574432] usbcore: registered new interface driver usbfs
[    0.574439] usbcore: registered new interface driver hub
[    0.574459] usbcore: registered new device driver usb
[    0.574484] pps_core: LinuxPPS API ver. 1 registered
[    0.574485] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.574487] PTP clock support registered
[    0.574494] EDAC MC: Ver: 3.0.0
[    0.574692] Registered efivars operations
[    0.607953] PCI: Using ACPI for IRQ routing
[    0.614243] PCI: pci_cache_line_size set to 64 bytes
[    0.614243] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.614243] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[    0.614243] e820: reserve RAM buffer [mem 0x94e4a000-0x97ffffff]
[    0.614243] e820: reserve RAM buffer [mem 0x9c3ef000-0x9fffffff]
[    0.614243] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[    0.614243] e820: reserve RAM buffer [mem 0x35f000000-0x35fffffff]
[    0.614244] NetLabel: Initializing
[    0.614244] NetLabel:  domain hash size = 128
[    0.614244] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.614244] NetLabel:  unlabeled traffic allowed by default
[    0.614796] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.614800] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.617624] clocksource: Switched to clocksource tsc-early
[    0.630297] VFS: Disk quotas dquot_6.6.0
[    0.630313] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.630344] *** VALIDATE hugetlbfs ***
[    0.630388] pnp: PnP ACPI init
[    0.631107] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.631110] system 00:00: [io  0xffff] has been reserved
[    0.631111] system 00:00: [io  0xffff] has been reserved
[    0.631113] system 00:00: [io  0xffff] has been reserved
[    0.631114] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.631115] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.631121] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.631177] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.631227] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.631231] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.631299] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.631340] pnp 00:04: Plug and Play ACPI device, IDs SYN2b37 PNP0f13 SYN0002 SYN2b00 (active)
[    0.631813] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.631814] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.631816] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.631818] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.631819] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.631821] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.631822] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.631824] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.631825] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.631827] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.631829] system 00:05: [mem 0xa0010000-0xa001ffff] has been reserved
[    0.631830] system 00:05: [mem 0xa0000000-0xa000ffff] has been reserved
[    0.631834] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.632216] pnp: PnP ACPI: found 6 devices
[    0.638086] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.638092] pci 0000:04:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.638097] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.638099] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.638101] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.638112] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa02fffff]
[    0.638123] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa0300000-0xa04fffff 64bit pref]
[    0.638125] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.638127] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.638130] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.638134] pci 0000:00:1c.0:   bridge window [mem 0xa0100000-0xa02fffff]
[    0.638137] pci 0000:00:1c.0:   bridge window [mem 0xa0300000-0xa04fffff 64bit pref]
[    0.638143] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.638145] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.638149] pci 0000:00:1c.2:   bridge window [mem 0xd1200000-0xd12fffff]
[    0.638156] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.638160] pci 0000:00:1c.3:   bridge window [mem 0xd1100000-0xd11fffff]
[    0.638168] pci 0000:04:00.0: BAR 6: assigned [mem 0xd1040000-0xd105ffff pref]
[    0.638169] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.638171] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.638175] pci 0000:00:1c.4:   bridge window [mem 0xd1000000-0xd10fffff]
[    0.638178] pci 0000:00:1c.4:   bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.638184] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.638185] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.638187] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.638188] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.638189] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.638191] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.638192] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.638193] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.638194] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.638196] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.638197] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.638198] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.638200] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.638201] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.638202] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.638203] pci_bus 0000:00: resource 19 [mem 0xa0000000-0xdfffffff window]
[    0.638205] pci_bus 0000:00: resource 20 [mem 0xfe101000-0xfe113fff window]
[    0.638206] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.638208] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa02fffff]
[    0.638209] pci_bus 0000:01: resource 2 [mem 0xa0300000-0xa04fffff 64bit pref]
[    0.638210] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.638212] pci_bus 0000:02: resource 1 [mem 0xd1200000-0xd12fffff]
[    0.638213] pci_bus 0000:03: resource 1 [mem 0xd1100000-0xd11fffff]
[    0.638214] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.638216] pci_bus 0000:04: resource 1 [mem 0xd1000000-0xd10fffff]
[    0.638217] pci_bus 0000:04: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.638380] NET: Registered protocol family 2
[    0.638525] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.638589] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.638769] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.638887] TCP: Hash tables configured (established 131072 bind 65536)
[    0.638927] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.638975] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.639070] NET: Registered protocol family 1
[    0.639076] NET: Registered protocol family 44
[    0.639087] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.639210] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.639211] pci 0000:00:14.0: PCI INT A: not connected
[    0.640880] PCI: CLS 64 bytes, default 64
[    0.640935] Trying to unpack rootfs image as initramfs...
[    0.852249] Freeing initrd memory: 15136K
[    0.852289] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDMA
[    0.852292] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDHC
[    0.874282] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.874284] software IO TLB: mapped [mem 0x959a9000-0x999a9000] (64MB)
[    0.874372] check: Scanning for low memory corruption every 60 seconds
[    0.874999] Initialise system trusted keyrings
[    0.875009] Key type blacklist registered
[    0.875055] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.876522] zbud: loaded
[    0.878452] Key type asymmetric registered
[    0.878454] Asymmetric key parser 'x509' registered
[    0.878462] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.878504] io scheduler mq-deadline registered
[    0.878505] io scheduler kyber registered
[    0.878552] io scheduler bfq registered
[    0.878935] pcieport 0000:00:1c.0: PME: Signaling with IRQ 42
[    0.878962] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.879258] pcieport 0000:00:1c.2: PME: Signaling with IRQ 43
[    0.879467] pcieport 0000:00:1c.3: PME: Signaling with IRQ 44
[    0.879662] pcieport 0000:00:1c.4: PME: Signaling with IRQ 45
[    0.879729] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.879812] efifb: probing for efifb
[    0.879829] efifb: showing boot graphics
[    0.881455] efifb: framebuffer at 0xc0000000, using 8128k, total 8128k
[    0.881456] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.881457] efifb: scrolling: redraw
[    0.881458] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.881506] fbcon: Deferring console take-over
[    0.881507] fb0: EFI VGA frame buffer device
[    0.881515] intel_idle: MWAIT substates: 0x11142120
[    0.881516] intel_idle: v0.4.1 model 0x3D
[    0.881765] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.881849] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.884290] ACPI: Lid Switch [LID0]
[    0.884338] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.887647] ACPI: Power Button [PWRB]
[    0.887708] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.890987] ACPI: Power Button [PWRF]
[    0.891764] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.892749] usbcore: registered new interface driver usbserial_generic
[    0.892754] usbserial: USB Serial support registered for generic
[    0.892772] rtc_cmos 00:01: RTC can wake from S4
[    0.892927] rtc_cmos 00:01: registered as rtc0
[    0.892944] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.893000] intel_pstate: Intel P-state driver initializing
[    0.893174] ledtrig-cpu: registered to indicate activity on CPUs
[    0.893775] NET: Registered protocol family 10
[    0.910703] Segment Routing with IPv6
[    0.910730] NET: Registered protocol family 17
[    0.910949] mce: Using 7 MCE banks
[    0.910966] RAS: Correctable Errors collector initialized.
[    0.911007] microcode: sig=0x306d4, pf=0x40, revision=0x2d
[    0.911065] microcode: Microcode Update Driver: v2.2.
[    0.911076] sched_clock: Marking stable (910645392, 415282)->(914989209, -3928535)
[    0.911327] registered taskstats version 1
[    0.911335] Loading compiled-in X.509 certificates
[    0.915495] Loaded X.509 cert 'Build time autogenerated kernel key: bc1e682951c6d55a59900fd12108abe436332297'
[    0.915519] zswap: loaded using pool lzo/zbud
[    0.923117] Key type big_key registered
[    0.923355] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GFX0._DSM.ECR1], AE_NOT_FOUND (20190509/psargs-330)
[    0.923362] ACPI Error: Aborting method \_SB.PCI0.GFX0._DSM due to previous error (AE_NOT_FOUND) (20190509/psparse-529)
[    0.923688] PM:   Magic number: 11:958:940
[    0.923773] rtc_cmos 00:01: setting system clock to 2019-07-21T14:54:35 UTC (1563720875)
[    0.925054] Freeing unused decrypted memory: 2040K
[    0.925364] Freeing unused kernel image memory: 1612K
[    0.934331] Write protecting the kernel read-only data: 18432k
[    0.935008] Freeing unused kernel image memory: 2012K
[    0.935136] Freeing unused kernel image memory: 208K
[    0.948353] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.948354] x86/mm: Checking user space page tables
[    0.957854] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.957855] Run /init as init process
[    1.033312] fbcon: Taking over console
[    1.033382] Console: switching to colour frame buffer device 240x67
[    1.042918] Linux agpgart interface v0.103
[    1.097330] [drm] radeon kernel modesetting enabled.
[    1.097352] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[    1.097484] ATPX version 1, functions 0x00000033
[    1.097679] ATPX Hybrid Graphics
[    1.097713] radeon 0000:04:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xb0000000 -> 0xbfffffff
[    1.097715] radeon 0000:04:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xd1000000 -> 0xd103ffff
[    1.097716] checking generic (c0000000 7f0000) vs hw (b0000000 10000000)
[    1.097717] checking generic (c0000000 7f0000) vs hw (d1000000 40000)
[    1.097739] radeon 0000:04:00.0: enabling device (0100 -> 0103)
[    1.097900] [drm] initializing kernel modesetting (HAINAN 0x1002:0x666F 0x17AA:0x390C 0x00).
[    1.108444] ATOM BIOS: AMD
[    1.108453] [drm] GPU not posted. posting now...
[    1.112113] radeon 0000:04:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[    1.112115] radeon 0000:04:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[    1.112119] [drm] Detected VRAM RAM=2048M, BAR=256M
[    1.112120] [drm] RAM width 64bits DDR
[    1.112307] [TTM] Zone  kernel: Available graphics memory: 6103962 KiB
[    1.112308] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[    1.112308] [TTM] Initializing pool allocator
[    1.112311] [TTM] Initializing DMA pool allocator
[    1.112325] [drm] radeon: 2048M of VRAM memory ready
[    1.112326] [drm] radeon: 2048M of GTT memory ready.
[    1.112344] [drm] Loading hainan Microcode
[    1.112429] [drm] Internal thermal controller with fan control
[    1.120289] [drm] radeon: dpm initialized
[    1.120292] [drm] GART: num cpu pages 524288, num gpu pages 524288
[    1.121459] [drm] PCIE gen 2 link speeds already enabled
[    1.129735] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[    1.129846] radeon 0000:04:00.0: WB enabled
[    1.129848] radeon 0000:04:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x0000000035713794
[    1.129850] radeon 0000:04:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000124ea307
[    1.129851] radeon 0000:04:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x000000008b171f08
[    1.129852] radeon 0000:04:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000867d8012
[    1.129853] radeon 0000:04:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006f55d284
[    1.129854] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.129854] [drm] Driver supports precise vblank timestamp query.
[    1.129855] radeon 0000:04:00.0: radeon: MSI limited to 32-bit
[    1.129896] radeon 0000:04:00.0: radeon: using MSI.
[    1.129913] [drm] radeon: irq initialized.
[    1.526969] [drm:r600_ring_test [radeon]] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)
[    1.526971] radeon 0000:04:00.0: disabling GPU acceleration
[    1.723870] [drm] Radeon Display Connectors
[    1.724952] [drm] Initialized radeon 2.50.0 20080528 for 0000:04:00.0 on minor 0
[    1.790970] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.805890] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.805981] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.811130] SCSI subsystem initialized
[    1.811282] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.811284] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    1.811326] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.811339] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.812403] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[    1.812409] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.812615] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    1.812618] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.812620] usb usb1: Product: xHCI Host Controller
[    1.812621] usb usb1: Manufacturer: Linux 5.2.1-arch1-1-ARCH xhci-hcd
[    1.812623] usb usb1: SerialNumber: 0000:00:14.0
[    1.812905] hub 1-0:1.0: USB hub found
[    1.812921] hub 1-0:1.0: 11 ports detected
[    1.819133] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.819140] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.819144] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.819195] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
[    1.819197] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.819200] usb usb2: Product: xHCI Host Controller
[    1.819201] usb usb2: Manufacturer: Linux 5.2.1-arch1-1-ARCH xhci-hcd
[    1.819203] usb usb2: SerialNumber: 0000:00:14.0
[    1.819355] hub 2-0:1.0: USB hub found
[    1.819367] hub 2-0:1.0: 4 ports detected
[    1.820971] usb: port power management may be unreliable
[    1.821786] libata version 3.00 loaded.
[    1.825596] ahci 0000:00:1f.2: version 3.0
[    1.835928] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x2 impl SATA mode
[    1.835931] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    1.836395] scsi host0: ahci
[    1.836556] scsi host1: ahci
[    1.836693] scsi host2: ahci
[    1.836818] scsi host3: ahci
[    1.836908] ata1: DUMMY
[    1.836911] ata2: SATA max UDMA/133 abar m2048@0xd1318000 port 0xd1318180 irq 47
[    1.836913] ata3: DUMMY
[    1.836914] ata4: DUMMY
[    1.838233] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.890997] tsc: Refined TSC clocksource calibration: 2194.918 MHz
[    1.891009] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa37202099, max_idle_ns: 440795206796 ns
[    1.891051] clocksource: Switched to clocksource tsc
[    2.147674] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[    2.151791] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.155622] ata2.00: ATAPI: PLDS    DVD-RW DA8A6SH, GL61, max UDMA/100
[    2.156989] ata2.00: configured for UDMA/100
[    2.182285] scsi 1:0:0:0: CD-ROM            PLDS     DVD-RW DA8A6SH   GL61 PQ: 0 ANSI: 5
[    2.288015] usb 1-4: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[    2.288019] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.288021] usb 1-4: Product: USB2.0-CRW
[    2.288023] usb 1-4: Manufacturer: Generic
[    2.288025] usb 1-4: SerialNumber: 20100201396000000
[    2.292687] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.292692] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.293311] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.294937] usbcore: registered new interface driver rtsx_usb
[    2.411059] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    2.433300] usb 2-1: New USB device found, idVendor=054c, idProduct=0aa4, bcdDevice=86.03
[    2.433305] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.433308] usb 2-1: Product: Storage
[    2.433311] usb 2-1: Manufacturer: Sony
[    2.433313] usb 2-1: SerialNumber: 459B59190114
[    2.442720] usbcore: registered new interface driver usb-storage
[    2.449011] scsi host4: uas
[    2.449143] usbcore: registered new interface driver uas
[    2.450162] scsi 4:0:0:0: Direct-Access     Sony     Storage          2210 PQ: 0 ANSI: 6
[    2.455892] sd 4:0:0:0: [sda] 250064400 512-byte logical blocks: (128 GB/119 GiB)
[    2.456025] sd 4:0:0:0: [sda] Write Protect is off
[    2.456026] sd 4:0:0:0: [sda] Mode Sense: 2f 00 00 00
[    2.456276] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.456791] sd 4:0:0:0: [sda] Optimal transfer size 33553920 bytes
[    2.464748]  sda: sda1 sda2 sda3
[    2.467217] sd 4:0:0:0: [sda] Attached SCSI disk
[    2.482998] random: fast init done
[    2.554351] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[    2.763975] usb 1-6: New USB device found, idVendor=0c45, idProduct=6513, bcdDevice= 0.12
[    2.763977] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.763979] usb 1-6: Product: Lenovo EasyCamera
[    2.763980] usb 1-6: Manufacturer: J5PECID0C
[    2.778841] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    2.894266] usb 1-7: new full-speed USB device number 4 using xhci_hcd
[    2.932156] systemd[1]: systemd 242.32-3-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    2.947762] systemd[1]: Detected architecture x86-64.
[    2.952184] systemd[1]: Set hostname to <G5080>.
[    3.041845] usb 1-7: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
[    3.041847] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.091426] systemd[1]: /usr/lib/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[    3.100307] systemd[1]: Listening on Journal Socket.
[    3.101846] systemd[1]: Created slice system-dhcpcd.slice.
[    3.103319] systemd[1]: Starting Load Kernel Modules...
[    3.103353] systemd[1]: Reached target Login Prompts.
[    3.103470] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    3.104617] systemd[1]: Mounting Huge Pages File System...
[    3.126780] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    3.126826] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    3.146559] EXT4-fs (sda3): re-mounted. Opts: stripe=8191
[    3.156885] random: lvm: uninitialized urandom read (4 bytes read)
[    3.164478] random: systemd-random-: uninitialized urandom read (512 bytes read)
[    3.464317] systemd-journald[276]: Received request to flush runtime journal from PID 1
[    3.602958] ACPI: AC Adapter [ADP0] (on-line)
[    3.607174] random: crng init done
[    3.665874] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input5
[    3.675389] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    3.675417] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    3.678598] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    3.685505] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[    3.718222] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    3.718224] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.718226] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.718227] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.718227] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.735549] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    3.735551] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    3.748578] r8168: loading out-of-tree module taints kernel.
[    3.748776] r8168: module verification failed: signature and/or required key missing - tainting kernel
[    3.758442] battery: ACPI: Battery Slot [BAT0] (battery present)
[    3.761276] r8168 Gigabit Ethernet driver 8.047.02-NAPI loaded
[    3.761289] r8168 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.802650] media: Linux media interface: v0.10
[    3.807271] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[    3.818149] r8168  Copyright (C) 2019  Realtek NIC software team <nicfae@realtek.com> 
                This program comes with ABSOLUTELY NO WARRANTY; for details, please see <[url]http://www.gnu.org/licenses/[/url]>. 
                This is free software, and you are welcome to redistribute it under certain conditions; see <[url]http://www.gnu.org/licenses/[/url]>. 
[    3.822442] cryptd: max_cpu_qlen set to 1000
[    3.893034] Adding 8388476k swap on /dev/sda2.  Priority:-2 extents:1 across:8388476k FS
[    3.906306] AVX2 version of gcm_enc/dec engaged.
[    3.906308] AES CTR mode by8 optimization enabled
[    3.920470] iTCO_vendor_support: vendor-support=0
[    3.932089] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.932149] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[    3.932964] videodev: Linux video capture interface: v2.00
[    3.937976] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.953568] r8168 0000:02:00.0 enp2s0: renamed from eth0
[    4.049990] intel-spi intel-spi: s25fl064k (8192 Kbytes)
[    4.074087] Bluetooth: Core ver 2.22
[    4.074106] NET: Registered protocol family 31
[    4.074108] Bluetooth: HCI device and connection manager initialized
[    4.074111] Bluetooth: HCI socket layer initialized
[    4.074113] Bluetooth: L2CAP socket layer initialized
[    4.074118] Bluetooth: SCO socket layer initialized
[    4.133456] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
[    4.133763] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    4.133765] snd_hda_codec_conexant hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.133767] snd_hda_codec_conexant hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[    4.133769] snd_hda_codec_conexant hdaudioC1D0:    mono: mono_out=0x0
[    4.133771] snd_hda_codec_conexant hdaudioC1D0:    inputs:
[    4.133773] snd_hda_codec_conexant hdaudioC1D0:      Internal Mic=0x1a
[    4.133775] snd_hda_codec_conexant hdaudioC1D0:      Mic=0x19
[    4.134560] snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication
[    4.138246] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[    4.138323] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[    4.152705] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.154006] Creating 1 MTD partitions on "intel-spi":
[    4.154010] 0x000000000000-0x000000800000 : "BIOS"
[    4.171881] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0c45:6513)
[    4.213150] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.213378] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    4.213381] cfg80211: failed to load regulatory.db
[    4.254933] usbcore: registered new interface driver btusb
[    4.267633] uvcvideo 1-6:1.0: Entity type for entity Extension 3 was not initialized!
[    4.267637] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
[    4.267639] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[    4.267832] input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input10
[    4.268237] usbcore: registered new interface driver uvcvideo
[    4.268238] USB Video Class driver (1.1.1)
[    4.277092] Bluetooth: hci0: read Intel version: 3707100100012d0d00
[    4.281310] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq
[    4.345119] checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
[    4.345121] fb0: switching to inteldrmfb from EFI VGA
[    4.345151] Console: switching to colour dummy device 80x25
[    4.347290] i915 0000:00:02.0: vgaarb: deactivate vga console
[    4.348828] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.348829] [drm] Driver supports precise vblank timestamp query.
[    4.349637] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GFX0._DSM.ECR1], AE_NOT_FOUND (20190509/psargs-330)
[    4.349649] ACPI Error: Aborting method \_SB.PCI0.GFX0._DSM due to previous error (AE_NOT_FOUND) (20190509/psparse-529)
[    4.349672] vga_switcheroo: enabled
[    4.349711] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.357184] 8021q: 802.1Q VLAN Support v1.8
[    4.381482] [drm] Initialized i915 1.6.0 20190417 for 0000:00:02.0 on minor 1
[    4.388410] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.388803] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[    4.389015] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.395193] fbcon: i915drmfb (fb0) is primary device
[    4.401296] enp2s0: 0xffffa93941add000, 68:f7:28:72:cb:d6, IRQ 48
[    4.661702] Intel(R) Wireless WiFi driver for Linux
[    4.661704] Copyright(c) 2003- 2015 Intel Corporation
[    4.666973] iwlwifi 0000:03:00.0: loaded firmware version 17.3216344376.0 op_mode iwlmvm
[    4.683049] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[    4.698060] Bluetooth: hci0: Intel firmware patch completed and activated
[    4.901171] [drm] amdgpu kernel modesetting enabled.
[    4.901324] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[    4.901416] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
[    4.901600] ATPX version 1, functions 0x00000033
[    4.901859] ATPX Hybrid Graphics
[    4.901977] CRAT table not found
[    4.901979] Virtual CRAT table created for CPU
[    4.901981] Parsing CRAT table with 1 nodes
[    4.901982] Creating topology SYSFS entries
[    4.902001] Topology: Add CPU node
[    4.902001] Finished initializing topology
[    4.923162] intel_rapl: Found RAPL domain package
[    4.923164] intel_rapl: Found RAPL domain core
[    4.923165] intel_rapl: Found RAPL domain uncore
[    4.923167] intel_rapl: Found RAPL domain dram
[    4.923170] intel_rapl: RAPL package 0 domain package locked by BIOS
[    4.923176] intel_rapl: RAPL package 0 domain dram locked by BIOS
[    4.925407] iwlwifi 0000:03:00.0: base HW address: d0:7e:35:97:c9:c1
[    4.973081] psmouse serio1: synaptics: queried max coordinates: x [..5670], y [..4794]
[    5.017167] psmouse serio1: synaptics: queried min coordinates: x [1314..], y [1098..]
[    5.045532] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    5.048627] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    5.108565] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x2a800/0x0, board id: 2848, fw id: 1581875
[    5.169336] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[    5.179636] mousedev: PS/2 mouse device common for all mice
[    5.788425] Console: switching to colour frame buffer device 240x67
[    5.818557] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    5.849339] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[    5.849428] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[    5.849505] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    5.849588] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[    5.849663] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[    7.715801] r8168: enp2s0: link up
[    7.715821] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   14.637007] [drm] PCIE gen 2 link speeds already enabled
[   14.637161] radeon 0000:04:00.0: No VRAM object for PCIE GART.
[   14.637188] [drm:si_resume [radeon]] *ERROR* si startup failed on resume
[  191.565601] [drm] PCIE gen 2 link speeds already enabled
[  191.565756] radeon 0000:04:00.0: No VRAM object for PCIE GART.
[  191.565782] [drm:si_resume [radeon]] *ERROR* si startup failed on resume
[  192.842817] fuse: init (API version 7.31)
[  194.043139] rfkill: input handler disabled
[ 3754.041692] perf: interrupt took too long (2602 > 2500), lowering kernel.perf_event_max_sample_rate to 76800
[ 4357.214032] perf: interrupt took too long (3254 > 3252), lowering kernel.perf_event_max_sample_rate to 61200
[ 5710.323912] perf: interrupt took too long (4076 > 4067), lowering kernel.perf_event_max_sample_rate to 48900
[ 6697.312009] perf: interrupt took too long (5279 > 5095), lowering kernel.perf_event_max_sample_rate to 37800
[10332.510152] perf: interrupt took too long (6636 > 6598), lowering kernel.perf_event_max_sample_rate to 30000
[69461.203649] perf: interrupt took too long (8311 > 8295), lowering kernel.perf_event_max_sample_rate to 24000
[71862.171146] r8168: enp2s0: link down
[71942.265911] r8168: enp2s0: link up
[81109.140805] perf: interrupt took too long (10394 > 10388), lowering kernel.perf_event_max_sample_rate to 19200
[153428.845519] printk: systemd: 50 output lines suppressed due to ratelimiting
[153428.852370] systemd[1]: systemd 242.84-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[153428.866347] systemd[1]: Detected architecture x86-64.
[153428.940324] systemd[1]: /usr/lib/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[174867.417994] [drm] PCIE gen 2 link speeds already enabled
[174867.418153] radeon 0000:04:00.0: No VRAM object for PCIE GART.
[174867.418189] [drm:si_resume [radeon]] *ERROR* si startup failed on resume

Last edited by ChingDim (2019-07-24 13:47:37)

Offline

#4 2019-07-24 12:21:23

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 7,459

Re: Radeon R5 M230 failed when booting, then disabled

First, use [ code ] tags for such content instead of quote tags, see https://bbs.archlinux.org/help.php#bbcode

dmesg is fine, journalctl has many filter options[1]  that can ease troubleshooting .

Which card is set as primary (aka boot first)  in uefi/bios firmware, amd or intel ?



[1] https://wiki.archlinux.org/index.php/Sy … ing_output

Last edited by Lone_Wolf (2019-07-24 12:21:42)


Multi-init booting with apg Openrc and systemd coexisting
Automounting : not needed, i prefer pmount
Aur helpers : makepkg + my own local repo === rarely need them

Offline

#5 2019-07-24 13:51:59

ChingDim
Member
Registered: 2019-07-22
Posts: 36

Re: Radeon R5 M230 failed when booting, then disabled

There is no option to select which GPU to boost first in BIOS. But I guess it's Intel?
i have an option to select whether the Radeon is enabled/disabled, obviously I set it to enabled smile

Please do let me know if you need me to do anything, this is a bug for ages, it has been here since I first touched linux when I used Ubuntu 17.10
It works when I used Windows on this laptop, but not on linux.

Last edited by ChingDim (2019-07-24 14:07:11)

Offline

#6 2019-07-25 13:01:40

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 7,459

Re: Radeon R5 M230 failed when booting, then disabled

That suggests this is not a motherboard/chipset/firmware problem.
Is windows still installed / used ? If so, which version ?

Let's try amdgpu kernel module instead of radeon.
Read https://wiki.archlinux.org/index.php/AM … K)_support

Your card is Southern islands family, boot with

radeon.si_support=0 amdgpu.si_support=1

as kernel parameters *.

post fresh dmesg of that boot.


* If you use a display manager to start X, you may want to add

systemd.unit=multi-user.target

as additional kernel parameter to make sure you boot to console login.


Multi-init booting with apg Openrc and systemd coexisting
Automounting : not needed, i prefer pmount
Aur helpers : makepkg + my own local repo === rarely need them

Offline

#7 2019-07-26 05:53:44

ChingDim
Member
Registered: 2019-07-22
Posts: 36

Re: Radeon R5 M230 failed when booting, then disabled

May I ask why the GPU is SI? I thought SI refers to HD 7000 series, and this GPU is "HD 8500M/R5 M230"
The last Windows versino I used on the laptop should be Windows 10 1703, Windows initially detected the GPU as R5 M230
then after I installed Radeon Settings and updated drivers , it was renamed to HD 8500M, both works in Windows.

I've setup AMDGPU, and by following Arch Wiki I did the following:
installed xf86-video-amdgpu
set amdgpu to load before radeon in mkinitcpio
set kernal cmmand parameters in grub and regenerated config.

[chingdim@G5080 ~]$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x2d, date = 2019-03-07
[    0.000000] Linux version 5.2.2-arch1-1-ARCH (builduser@heftig-71853) (gcc version 9.1.0 (GCC)) #1 SMP PREEMPT Sun Jul 21 19:18:34 UTC 2019
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e996181c-f329-41a0-9db3-8c36b0ed4cd4 rw radeon.si_support=0 amdgpu.si_support=1 audit=0 loglevel=3 quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000086000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094e49fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000094e4a000-0x0000000095749fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009574a000-0x000000009c3eefff] usable
[    0.000000] BIOS-e820: [mem 0x000000009c3ef000-0x000000009c5eefff] type 20
[    0.000000] BIOS-e820: [mem 0x000000009c5ef000-0x000000009cddefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009cddf000-0x000000009cf7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000035effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  SMBIOS=0x9c669000  ESRT=0x9c771418  ACPI 2.0=0x9cffe014 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 80E5/Lenovo G50-80, BIOS B0CNA0WW 09/30/2016
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2194.892 MHz processor
[    0.000573] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000575] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000582] last_pfn = 0x35f000 max_arch_pfn = 0x400000000
[    0.000586] MTRR default type: uncachable
[    0.000588] MTRR fixed ranges enabled:
[    0.000589]   00000-9FFFF write-back
[    0.000590]   A0000-BFFFF uncachable
[    0.000591]   C0000-E7FFF write-protect
[    0.000592]   E8000-EFFFF write-combining
[    0.000593]   F0000-FFFFF write-protect
[    0.000593] MTRR variable ranges enabled:
[    0.000595]   0 base 0000000000 mask 7C00000000 write-back
[    0.000596]   1 base 009D000000 mask 7FFF000000 uncachable
[    0.000597]   2 base 009E000000 mask 7FFE000000 uncachable
[    0.000598]   3 base 00A0000000 mask 7FE0000000 uncachable
[    0.000599]   4 base 00C0000000 mask 7FC0000000 uncachable
[    0.000600]   5 disabled
[    0.000601]   6 disabled
[    0.000601]   7 disabled
[    0.000602]   8 disabled
[    0.000602]   9 disabled
[    0.001504] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001697] total RAM covered: 14800M
[    0.002146] Found optimal setting for mtrr clean up
[    0.002147]  gran_size: 64K 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 0G
[    0.002985] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
[    0.002990] last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[    0.012806] esrt: Reserving ESRT space from 0x000000009c771418 to 0x000000009c771450.
[    0.012815] check: Scanning 1 areas for low memory corruption
[    0.012820] Using GB pages for direct mapping
[    0.012822] BRK [0x166001000, 0x166001fff] PGTABLE
[    0.012824] BRK [0x166002000, 0x166002fff] PGTABLE
[    0.012825] BRK [0x166003000, 0x166003fff] PGTABLE
[    0.012851] BRK [0x166004000, 0x166004fff] PGTABLE
[    0.012853] BRK [0x166005000, 0x166005fff] PGTABLE
[    0.012970] BRK [0x166006000, 0x166006fff] PGTABLE
[    0.013003] BRK [0x166007000, 0x166007fff] PGTABLE
[    0.013058] BRK [0x166008000, 0x166008fff] PGTABLE
[    0.013115] BRK [0x166009000, 0x166009fff] PGTABLE
[    0.013149] BRK [0x16600a000, 0x16600afff] PGTABLE
[    0.013185] Secure boot could not be determined
[    0.013186] RAMDISK: [mem 0x3627d000-0x37135fff]
[    0.013192] ACPI: Early table checksum verification disabled
[    0.013195] ACPI: RSDP 0x000000009CFFE014 000024 (v02 LENOVO)
[    0.013199] ACPI: XSDT 0x000000009CFCF188 0000D4 (v01 LENOVO CB-01    00000001      01000013)
[    0.013204] ACPI: FACP 0x000000009CFF6000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013210] ACPI: DSDT 0x000000009CFE1000 00FE6B (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013213] ACPI: FACS 0x000000009CF7A000 000040
[    0.013216] ACPI: UEFI 0x000000009CFFC000 000042 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013219] ACPI: ASF! 0x000000009CFFA000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013222] ACPI: BOOT 0x000000009CFF8000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013225] ACPI: LPIT 0x000000009CFF4000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013228] ACPI: MCFG 0x000000009CFF2000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013231] ACPI: SSDT 0x000000009CFDB000 000B74 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013234] ACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013237] ACPI: ASPT 0x000000009CFF9000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013239] ACPI: HPET 0x000000009CFF5000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013242] ACPI: WDAT 0x000000009CFF1000 000224 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013245] ACPI: SSDT 0x000000009CFDC000 000539 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013249] ACPI: MSDM 0x000000009CFFB000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013251] ACPI: APIC 0x000000009CFF3000 00008C (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013254] ACPI: SSDT 0x000000009CFD5000 005AC3 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013257] ACPI: SSDT 0x000000009CFDD000 00342F (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013260] ACPI: DBGP 0x000000009CFF7000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013263] ACPI: SSDT 0x000000009CFD3000 001BF5 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013266] ACPI: DMAR 0x000000009CFD2000 0000F0 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013269] ACPI: CSRT 0x000000009CFD1000 0000C4 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013272] ACPI: FPDT 0x000000009CFD0000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013275] ACPI: BGRT 0x000000009CFCE000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.013283] ACPI: Local APIC address 0xfee00000
[    0.013368] No NUMA configuration found
[    0.013369] Faking a node at [mem 0x0000000000000000-0x000000035effffff]
[    0.013373] NODE_DATA(0) allocated [mem 0x35effc000-0x35effffff]
[    0.013399] Zone ranges:
[    0.013400]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.013402]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.013403]   Normal   [mem 0x0000000100000000-0x000000035effffff]
[    0.013404]   Device   empty
[    0.013405] Movable zone start for each node
[    0.013405] Early memory node ranges
[    0.013406]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.013407]   node   0: [mem 0x0000000000059000-0x0000000000085fff]
[    0.013408]   node   0: [mem 0x0000000000100000-0x0000000094e49fff]
[    0.013409]   node   0: [mem 0x000000009574a000-0x000000009c3eefff]
[    0.013410]   node   0: [mem 0x000000009cfff000-0x000000009cffffff]
[    0.013410]   node   0: [mem 0x0000000100000000-0x000000035effffff]
[    0.013521] Zeroed struct page in unavailable ranges: 17804 pages
[    0.013523] Initmem setup node 0 [mem 0x0000000000001000-0x000000035effffff]
[    0.013524] On node 0 totalpages: 3123828
[    0.013525]   DMA zone: 64 pages used for memmap
[    0.013526]   DMA zone: 23 pages reserved
[    0.013527]   DMA zone: 3972 pages, LIFO batch:0
[    0.013587]   DMA32 zone: 9900 pages used for memmap
[    0.013588]   DMA32 zone: 633584 pages, LIFO batch:63
[    0.023729]   Normal zone: 38848 pages used for memmap
[    0.023731]   Normal zone: 2486272 pages, LIFO batch:63
[    0.058024] Reserving Intel graphics memory at [mem 0x9e000000-0x9fffffff]
[    0.058094] ACPI: PM-Timer IO Port: 0x1808
[    0.058095] ACPI: Local APIC address 0xfee00000
[    0.058114] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.058116] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.058118] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.058119] ACPI: IRQ0 used by override.
[    0.058120] ACPI: IRQ9 used by override.
[    0.058122] Using ACPI (MADT) for SMP configuration information
[    0.058124] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.058136] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.058157] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.058159] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.058161] PM: Registered nosave memory: [mem 0x00086000-0x0009ffff]
[    0.058161] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.058163] PM: Registered nosave memory: [mem 0x94e4a000-0x95749fff]
[    0.058165] PM: Registered nosave memory: [mem 0x9c3ef000-0x9c5eefff]
[    0.058166] PM: Registered nosave memory: [mem 0x9c5ef000-0x9cddefff]
[    0.058166] PM: Registered nosave memory: [mem 0x9cddf000-0x9cf7efff]
[    0.058167] PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff]
[    0.058169] PM: Registered nosave memory: [mem 0x9d000000-0x9dffffff]
[    0.058169] PM: Registered nosave memory: [mem 0x9e000000-0x9fffffff]
[    0.058170] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
[    0.058171] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.058171] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.058172] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.058173] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.058173] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.058174] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.058175] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.058175] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.058176] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.058176] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.058177] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.058178] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.058178] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.058181] [mem 0xa0000000-0xdfffffff] available for PCI devices
[    0.058182] Booting paravirtualized kernel on bare hardware
[    0.058185] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.174372] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.174657] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[    0.174664] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[    0.174665] pcpu-alloc: [0] 0 1 2 3 
[    0.174687] Built 1 zonelists, mobility grouping on.  Total pages: 3074993
[    0.174688] Policy zone: Normal
[    0.174690] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e996181c-f329-41a0-9db3-8c36b0ed4cd4 rw radeon.si_support=0 amdgpu.si_support=1 audit=0 loglevel=3 quiet
[    0.174769] audit: disabled (until reboot)
[    0.180743] Calgary: detecting Calgary via BIOS EBDA area
[    0.180745] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.214338] Memory: 12134148K/12495312K available (12291K kernel code, 1320K rwdata, 3888K rodata, 1612K init, 3624K bss, 361164K reserved, 0K cma-reserved)
[    0.214468] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.214480] Kernel/User page tables isolation: enabled
[    0.214495] ftrace: allocating 37372 entries in 146 pages
[    0.231439] rcu: Preemptible hierarchical RCU implementation.
[    0.231440] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.231441] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.231442] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.231443] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.231443] 	Tasks RCU enabled.
[    0.231444] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.231445] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.233474] NR_IRQS: 20736, nr_irqs: 728, preallocated irqs: 16
[    0.233648] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.233725] random: get_random_bytes called from start_kernel+0x37e/0x559 with crng_init=0
[    0.233750] Console: colour dummy device 80x25
[    0.233754] printk: console [tty0] enabled
[    0.233775] ACPI: Core revision 20190509
[    0.234066] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.234074] hpet clockevent registered
[    0.234079] APIC: Switch to symmetric I/O mode setup
[    0.234081] DMAR: Host address width 39
[    0.234082] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.234087] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[    0.234088] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.234092] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.234093] DMAR: RMRR base: 0x0000009cd84000 end: 0x0000009cda3fff
[    0.234094] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
[    0.234095] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA
[    0.234096] DMAR: ANDD device: 2 name: \_SB.PCI0.SDHC
[    0.234097] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.234098] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.234099] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.234100] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.234597] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.234598] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.235220] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.250747] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa3595359b, max_idle_ns: 440795207963 ns
[    0.250751] Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.69 BogoMIPS (lpj=7316306)
[    0.250754] pid_max: default: 32768 minimum: 301
[    0.253901] LSM: Security Framework initializing
[    0.253904] Yama: becoming mindful.
[    0.256373] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.257628] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.257680] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.257721] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.257877] *** VALIDATE proc ***
[    0.257930] *** VALIDATE cgroup1 ***
[    0.257931] *** VALIDATE cgroup2 ***
[    0.257990] process: using mwait in idle threads
[    0.257993] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.257994] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.257996] Spectre V2 : Mitigation: Full generic retpoline
[    0.257997] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.257997] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.258000] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.258001] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.258002] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.258005] MDS: Mitigation: Clear CPU buffers
[    0.258270] Freeing SMP alternatives memory: 32K
[    0.260826] TSC deadline timer enabled
[    0.260828] smpboot: CPU0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[    0.280756] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.280792] ... version:                3
[    0.280793] ... bit width:              48
[    0.280793] ... generic registers:      4
[    0.280794] ... value mask:             0000ffffffffffff
[    0.280795] ... max period:             00007fffffffffff
[    0.280795] ... fixed-purpose events:   3
[    0.280796] ... event mask:             000000070000000f
[    0.287419] rcu: Hierarchical SRCU implementation.
[    0.310877] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.317425] smp: Bringing up secondary CPUs ...
[    0.357430] x86: Booting SMP configuration:
[    0.357431] .... node  #0, CPUs:      #1 #2
[    0.397904] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.437432]  #3
[    0.437886] smp: Brought up 1 node, 4 CPUs
[    0.437886] smpboot: Max logical packages: 1
[    0.437886] smpboot: Total of 4 processors activated (17566.76 BogoMIPS)
[    0.441065] devtmpfs: initialized
[    0.441065] x86/mm: Memory block size: 128MB
[    0.441785] PM: Registering ACPI NVS region [mem 0x9cddf000-0x9cf7efff] (1703936 bytes)
[    0.441785] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.441785] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.441785] pinctrl core: initialized pinctrl subsystem
[    0.441785] PM: RTC time: 05:30:45, date: 2019-07-26
[    0.441785] NET: Registered protocol family 16
[    0.441785] cpuidle: using governor ladder
[    0.441785] cpuidle: using governor menu
[    0.441785] Simple Boot Flag at 0x44 set to 0x1
[    0.441785] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.441785] ACPI: bus type PCI registered
[    0.441785] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.441785] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.441785] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.441785] PCI: Using configuration type 1 for base access
[    0.441785] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.444348] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.444348] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.444348] ACPI: Added _OSI(Module Device)
[    0.444348] ACPI: Added _OSI(Processor Device)
[    0.444348] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.444348] ACPI: Added _OSI(Processor Aggregator Device)
[    0.444348] ACPI: Added _OSI(Linux-Dell-Video)
[    0.444348] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.444348] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.471288] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.474120] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.475015] ACPI: Dynamic OEM Table Load:
[    0.475024] ACPI: SSDT 0xFFFF8B65502BC800 0003D3 (v02 PmRef  Cpu0Cst  00003001 INTL 20121220)
[    0.475809] ACPI: Dynamic OEM Table Load:
[    0.475816] ACPI: SSDT 0xFFFF8B6550733800 0005AA (v02 PmRef  ApIst    00003000 INTL 20121220)
[    0.476646] ACPI: Dynamic OEM Table Load:
[    0.476652] ACPI: SSDT 0xFFFF8B6550133600 000119 (v02 PmRef  ApCst    00003000 INTL 20121220)
[    0.478266] ACPI: EC: EC started
[    0.478266] ACPI: EC: interrupt blocked
[    0.480754] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.480757] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.480759] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.480760] ACPI: Interpreter enabled
[    0.480810] ACPI: (supports S0 S3 S4 S5)
[    0.480811] ACPI: Using IOAPIC for interrupt routing
[    0.480857] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.481353] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[    0.481367] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.496516] ACPI: Power Resource [PC05] (on)
[    0.501752] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.501760] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.503154] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.503156] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.504236] PCI host bridge to bus 0000:00
[    0.504239] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.504241] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.504242] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.504243] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.504244] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.504245] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.504246] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.504248] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.504249] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.504250] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.504251] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.504252] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.504253] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.504254] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.504255] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.504256] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff window]
[    0.504258] pci_bus 0000:00: root bus resource [mem 0xfe101000-0xfe113fff window]
[    0.504259] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.504268] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[    0.504649] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[    0.504662] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit]
[    0.504669] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.504674] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.504689] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.505038] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GFX0._DSM.ECR1], AE_NOT_FOUND (20190509/psargs-330)
[    0.505045] ACPI Error: Aborting method \_SB.PCI0.GFX0._DSM due to previous error (AE_NOT_FOUND) (20190509/psparse-529)
[    0.505082] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[    0.505093] pci 0000:00:03.0: reg 0x10: [mem 0xd1310000-0xd1313fff 64bit]
[    0.505489] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[    0.505509] pci 0000:00:14.0: reg 0x10: [mem 0xd1300000-0xd130ffff 64bit]
[    0.505570] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.505929] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[    0.505950] pci 0000:00:16.0: reg 0x10: [mem 0xd131a000-0xd131a01f 64bit]
[    0.506013] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.506372] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[    0.506393] pci 0000:00:1b.0: reg 0x10: [mem 0xd1314000-0xd1317fff 64bit]
[    0.506452] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.506806] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[    0.507194] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.507624] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
[    0.507708] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.508132] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[    0.508215] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.508636] pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400
[    0.508719] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.509144] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[    0.509614] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[    0.509630] pci 0000:00:1f.2: reg 0x10: [io  0x5088-0x508f]
[    0.509637] pci 0000:00:1f.2: reg 0x14: [io  0x5094-0x5097]
[    0.509644] pci 0000:00:1f.2: reg 0x18: [io  0x5080-0x5087]
[    0.509650] pci 0000:00:1f.2: reg 0x1c: [io  0x5090-0x5093]
[    0.509657] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
[    0.509664] pci 0000:00:1f.2: reg 0x24: [mem 0xd1318000-0xd13187ff]
[    0.509700] pci 0000:00:1f.2: PME# supported from D3hot
[    0.510051] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[    0.510068] pci 0000:00:1f.3: reg 0x10: [mem 0xd1319000-0xd13190ff 64bit]
[    0.510087] pci 0000:00:1f.3: reg 0x20: [io  0x5040-0x505f]
[    0.510503] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.510578] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.510609] pci 0000:02:00.0: reg 0x10: [io  0x4000-0x40ff]
[    0.510637] pci 0000:02:00.0: reg 0x18: [mem 0xd1204000-0xd1204fff 64bit]
[    0.510655] pci 0000:02:00.0: reg 0x20: [mem 0xd1200000-0xd1203fff 64bit]
[    0.510765] pci 0000:02:00.0: supports D1 D2
[    0.510767] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.510907] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.510910] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.510913] pci 0000:00:1c.2:   bridge window [mem 0xd1200000-0xd12fffff]
[    0.511127] pci 0000:03:00.0: [8086:08b4] type 00 class 0x028000
[    0.511235] pci 0000:03:00.0: reg 0x10: [mem 0xd1100000-0xd1101fff 64bit]
[    0.511627] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.512056] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.512060] pci 0000:00:1c.3:   bridge window [mem 0xd1100000-0xd11fffff]
[    0.512138] pci 0000:04:00.0: [1002:666f] type 00 class 0x038000
[    0.512163] pci 0000:04:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.512174] pci 0000:04:00.0: reg 0x18: [mem 0xd1000000-0xd103ffff 64bit]
[    0.512181] pci 0000:04:00.0: reg 0x20: [io  0x3000-0x30ff]
[    0.512194] pci 0000:04:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.512201] pci 0000:04:00.0: enabling Extended Tags
[    0.512262] pci 0000:04:00.0: supports D1 D2
[    0.512263] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[    0.512291] pci 0000:04:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 32.000 Gb/s with 5 GT/s x8 link)
[    0.512364] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.512367] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.512369] pci 0000:00:1c.4:   bridge window [mem 0xd1000000-0xd10fffff]
[    0.512374] pci 0000:00:1c.4:   bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.513802] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.513877] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.513949] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.514020] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.514096] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.514172] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.514243] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.514313] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.517486] ACPI: EC: interrupt unblocked
[    0.517508] ACPI: EC: event unblocked
[    0.517518] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x7, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.517520] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[    0.517618] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.517618] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.517618] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.517618] vgaarb: loaded
[    0.517618] ACPI: bus type USB registered
[    0.517618] usbcore: registered new interface driver usbfs
[    0.517618] usbcore: registered new interface driver hub
[    0.517621] usbcore: registered new device driver usb
[    0.517642] pps_core: LinuxPPS API ver. 1 registered
[    0.517643] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.517645] PTP clock support registered
[    0.517653] EDAC MC: Ver: 3.0.0
[    0.517850] Registered efivars operations
[    0.551125] PCI: Using ACPI for IRQ routing
[    0.559565] PCI: pci_cache_line_size set to 64 bytes
[    0.559877] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.559878] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[    0.559879] e820: reserve RAM buffer [mem 0x94e4a000-0x97ffffff]
[    0.559880] e820: reserve RAM buffer [mem 0x9c3ef000-0x9fffffff]
[    0.559882] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[    0.559883] e820: reserve RAM buffer [mem 0x35f000000-0x35fffffff]
[    0.559992] NetLabel: Initializing
[    0.559993] NetLabel:  domain hash size = 128
[    0.559993] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.560006] NetLabel:  unlabeled traffic allowed by default
[    0.560011] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.560011] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.561797] clocksource: Switched to clocksource tsc-early
[    0.572905] VFS: Disk quotas dquot_6.6.0
[    0.572922] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.572952] *** VALIDATE hugetlbfs ***
[    0.572997] pnp: PnP ACPI init
[    0.574006] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.574008] system 00:00: [io  0xffff] has been reserved
[    0.574009] system 00:00: [io  0xffff] has been reserved
[    0.574011] system 00:00: [io  0xffff] has been reserved
[    0.574012] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.574014] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.574019] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.574077] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.574141] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.574144] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.574213] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.574254] pnp 00:04: Plug and Play ACPI device, IDs SYN2b37 PNP0f13 SYN0002 SYN2b00 (active)
[    0.574720] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.574722] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.574724] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.574725] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.574726] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.574728] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.574729] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.574731] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.574733] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.574734] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.574736] system 00:05: [mem 0xa0010000-0xa001ffff] has been reserved
[    0.574737] system 00:05: [mem 0xa0000000-0xa000ffff] has been reserved
[    0.574741] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.575111] pnp: PnP ACPI: found 6 devices
[    0.580948] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.580953] pci 0000:04:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.580957] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.580959] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.580961] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.580973] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa02fffff]
[    0.580983] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa0300000-0xa04fffff 64bit pref]
[    0.580986] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.580988] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.580990] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.580994] pci 0000:00:1c.0:   bridge window [mem 0xa0100000-0xa02fffff]
[    0.580998] pci 0000:00:1c.0:   bridge window [mem 0xa0300000-0xa04fffff 64bit pref]
[    0.581002] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.581004] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.581008] pci 0000:00:1c.2:   bridge window [mem 0xd1200000-0xd12fffff]
[    0.581015] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.581018] pci 0000:00:1c.3:   bridge window [mem 0xd1100000-0xd11fffff]
[    0.581026] pci 0000:04:00.0: BAR 6: assigned [mem 0xd1040000-0xd105ffff pref]
[    0.581028] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.581030] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.581033] pci 0000:00:1c.4:   bridge window [mem 0xd1000000-0xd10fffff]
[    0.581036] pci 0000:00:1c.4:   bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.581042] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.581043] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.581045] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.581046] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.581047] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.581048] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.581049] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.581051] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.581052] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.581053] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.581055] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.581056] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.581057] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.581058] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.581060] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.581061] pci_bus 0000:00: resource 19 [mem 0xa0000000-0xdfffffff window]
[    0.581062] pci_bus 0000:00: resource 20 [mem 0xfe101000-0xfe113fff window]
[    0.581063] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.581065] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa02fffff]
[    0.581066] pci_bus 0000:01: resource 2 [mem 0xa0300000-0xa04fffff 64bit pref]
[    0.581067] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.581068] pci_bus 0000:02: resource 1 [mem 0xd1200000-0xd12fffff]
[    0.581070] pci_bus 0000:03: resource 1 [mem 0xd1100000-0xd11fffff]
[    0.581071] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.581072] pci_bus 0000:04: resource 1 [mem 0xd1000000-0xd10fffff]
[    0.581073] pci_bus 0000:04: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.581234] NET: Registered protocol family 2
[    0.581378] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.581440] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.581620] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.581734] TCP: Hash tables configured (established 131072 bind 65536)
[    0.581776] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.581823] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.581921] NET: Registered protocol family 1
[    0.581927] NET: Registered protocol family 44
[    0.581936] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.582056] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.582057] pci 0000:00:14.0: PCI INT A: not connected
[    0.583726] PCI: CLS 64 bytes, default 64
[    0.583778] Trying to unpack rootfs image as initramfs...
[    0.793923] Freeing initrd memory: 15076K
[    0.793960] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDMA
[    0.793964] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDHC
[    0.817453] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.817455] software IO TLB: mapped [mem 0x959a9000-0x999a9000] (64MB)
[    0.817536] check: Scanning for low memory corruption every 60 seconds
[    0.818151] Initialise system trusted keyrings
[    0.818162] Key type blacklist registered
[    0.818207] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.819573] zbud: loaded
[    0.821460] Key type asymmetric registered
[    0.821461] Asymmetric key parser 'x509' registered
[    0.821468] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.821510] io scheduler mq-deadline registered
[    0.821511] io scheduler kyber registered
[    0.821553] io scheduler bfq registered
[    0.821950] pcieport 0000:00:1c.0: PME: Signaling with IRQ 42
[    0.821977] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.822232] pcieport 0000:00:1c.2: PME: Signaling with IRQ 43
[    0.822434] pcieport 0000:00:1c.3: PME: Signaling with IRQ 44
[    0.822620] pcieport 0000:00:1c.4: PME: Signaling with IRQ 45
[    0.822687] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.822766] efifb: probing for efifb
[    0.822783] efifb: showing boot graphics
[    0.824470] efifb: framebuffer at 0xc0000000, using 8128k, total 8128k
[    0.824471] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.824472] efifb: scrolling: redraw
[    0.824473] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.824519] fbcon: Deferring console take-over
[    0.824520] fb0: EFI VGA frame buffer device
[    0.824528] intel_idle: MWAIT substates: 0x11142120
[    0.824529] intel_idle: v0.4.1 model 0x3D
[    0.824764] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.824849] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.827472] ACPI: Lid Switch [LID0]
[    0.827522] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.834105] ACPI: Power Button [PWRB]
[    0.834149] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.837445] ACPI: Power Button [PWRF]
[    0.838195] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.839262] usbcore: registered new interface driver usbserial_generic
[    0.839268] usbserial: USB Serial support registered for generic
[    0.839285] rtc_cmos 00:01: RTC can wake from S4
[    0.839437] rtc_cmos 00:01: registered as rtc0
[    0.839451] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.839506] intel_pstate: Intel P-state driver initializing
[    0.839686] ledtrig-cpu: registered to indicate activity on CPUs
[    0.840259] NET: Registered protocol family 10
[    0.858433] Segment Routing with IPv6
[    0.858466] NET: Registered protocol family 17
[    0.858788] mce: Using 7 MCE banks
[    0.858806] RAS: Correctable Errors collector initialized.
[    0.858847] microcode: sig=0x306d4, pf=0x40, revision=0x2d
[    0.858938] microcode: Microcode Update Driver: v2.2.
[    0.858950] sched_clock: Marking stable (858518486, 411980)->(866637972, -7707506)
[    0.859171] registered taskstats version 1
[    0.859184] Loading compiled-in X.509 certificates
[    0.863164] Loaded X.509 cert 'Build time autogenerated kernel key: 6d90efd22ac38e21e010027eef4c95c9831d77ae'
[    0.863185] zswap: loaded using pool lzo/zbud
[    0.871418] Key type big_key registered
[    0.871670] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GFX0._DSM.ECR1], AE_NOT_FOUND (20190509/psargs-330)
[    0.871678] ACPI Error: Aborting method \_SB.PCI0.GFX0._DSM due to previous error (AE_NOT_FOUND) (20190509/psparse-529)
[    0.872011] PM:   Magic number: 11:964:517
[    0.872100] rtc_cmos 00:01: setting system clock to 2019-07-26T05:30:45 UTC (1564119045)
[    0.873246] Freeing unused decrypted memory: 2040K
[    0.873545] Freeing unused kernel image memory: 1612K
[    0.884197] Write protecting the kernel read-only data: 18432k
[    0.885060] Freeing unused kernel image memory: 2012K
[    0.885228] Freeing unused kernel image memory: 208K
[    0.901281] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.901282] x86/mm: Checking user space page tables
[    0.910552] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.910553] Run /init as init process
[    0.982532] fbcon: Taking over console
[    0.982604] Console: switching to colour frame buffer device 240x67
[    0.989999] Linux agpgart interface v0.103
[    1.039441] [drm] radeon kernel modesetting enabled.
[    1.039464] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[    1.039609] ATPX version 1, functions 0x00000033
[    1.039744] ATPX Hybrid Graphics
[    1.039779] radeon 0000:04:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xb0000000 -> 0xbfffffff
[    1.039781] radeon 0000:04:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xd1000000 -> 0xd103ffff
[    1.039782] checking generic (c0000000 7f0000) vs hw (b0000000 10000000)
[    1.039783] checking generic (c0000000 7f0000) vs hw (d1000000 40000)
[    1.039805] radeon 0000:04:00.0: enabling device (0100 -> 0103)
[    1.039969] radeon 0000:04:00.0: SI support disabled by module param
[    1.098963] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.113630] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.113696] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.120719] SCSI subsystem initialized
[    1.120886] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.120888] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    1.120923] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.120931] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.121997] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[    1.122001] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.122272] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    1.122274] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.122276] usb usb1: Product: xHCI Host Controller
[    1.122278] usb usb1: Manufacturer: Linux 5.2.2-arch1-1-ARCH xhci-hcd
[    1.122279] usb usb1: SerialNumber: 0000:00:14.0
[    1.122691] hub 1-0:1.0: USB hub found
[    1.122708] hub 1-0:1.0: 11 ports detected
[    1.131624] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.131628] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.131631] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.131667] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
[    1.131668] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.131670] usb usb2: Product: xHCI Host Controller
[    1.131671] usb usb2: Manufacturer: Linux 5.2.2-arch1-1-ARCH xhci-hcd
[    1.131672] usb usb2: SerialNumber: 0000:00:14.0
[    1.131985] hub 2-0:1.0: USB hub found
[    1.131996] hub 2-0:1.0: 4 ports detected
[    1.133366] usb: port power management may be unreliable
[    1.134127] libata version 3.00 loaded.
[    1.138098] ahci 0000:00:1f.2: version 3.0
[    1.146323] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.150804] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x2 impl SATA mode
[    1.150808] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    1.151565] scsi host0: ahci
[    1.152929] scsi host1: ahci
[    1.153108] scsi host2: ahci
[    1.153273] scsi host3: ahci
[    1.153359] ata1: DUMMY
[    1.153362] ata2: SATA max UDMA/133 abar m2048@0xd1318000 port 0xd1318180 irq 47
[    1.153363] ata3: DUMMY
[    1.153364] ata4: DUMMY
[    1.460864] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[    1.471727] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.475632] ata2.00: ATAPI: PLDS    DVD-RW DA8A6SH, GL61, max UDMA/100
[    1.481505] ata2.00: configured for UDMA/100
[    1.501721] scsi 1:0:0:0: CD-ROM            PLDS     DVD-RW DA8A6SH   GL61 PQ: 0 ANSI: 5
[    1.601765] usb 1-4: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[    1.601771] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.601775] usb 1-4: Product: USB2.0-CRW
[    1.601778] usb 1-4: Manufacturer: Generic
[    1.601781] usb 1-4: SerialNumber: 20100201396000000
[    1.605798] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.605804] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.606465] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.611185] usbcore: registered new interface driver rtsx_usb
[    1.724335] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    1.750614] usb 2-1: New USB device found, idVendor=054c, idProduct=0aa4, bcdDevice=86.03
[    1.750620] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.750624] usb 2-1: Product: Storage
[    1.750627] usb 2-1: Manufacturer: Sony
[    1.750630] usb 2-1: SerialNumber: 459B59190114
[    1.759388] usbcore: registered new interface driver usb-storage
[    1.764254] scsi host4: uas
[    1.764423] usbcore: registered new interface driver uas
[    1.765755] scsi 4:0:0:0: Direct-Access     Sony     Storage          2210 PQ: 0 ANSI: 6
[    1.773454] sd 4:0:0:0: [sda] 250064400 512-byte logical blocks: (128 GB/119 GiB)
[    1.773581] sd 4:0:0:0: [sda] Write Protect is off
[    1.773584] sd 4:0:0:0: [sda] Mode Sense: 2f 00 00 00
[    1.773818] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.774371] sd 4:0:0:0: [sda] Optimal transfer size 33553920 bytes
[    1.782400]  sda: sda1 sda2 sda3
[    1.784980] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.799716] random: fast init done
[    1.834157] tsc: Refined TSC clocksource calibration: 2194.918 MHz
[    1.834165] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa37202099, max_idle_ns: 440795206796 ns
[    1.834194] clocksource: Switched to clocksource tsc
[    1.867507] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[    1.988950] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    2.077209] usb 1-6: New USB device found, idVendor=0c45, idProduct=6513, bcdDevice= 0.12
[    2.077212] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.077213] usb 1-6: Product: Lenovo EasyCamera
[    2.077214] usb 1-6: Manufacturer: J5PECID0C
[    2.139398] systemd[1]: systemd 242.84-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    2.154273] systemd[1]: Detected architecture x86-64.
[    2.158882] systemd[1]: Set hostname to <G5080>.
[    2.207442] usb 1-7: new full-speed USB device number 4 using xhci_hcd
[    2.296033] systemd[1]: Listening on Journal Socket.
[    2.297602] systemd[1]: Mounting POSIX Message Queue File System...
[    2.297886] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.302291] systemd[1]: Listening on Process Core Dump Socket.
[    2.302380] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.302642] systemd[1]: Listening on LVM2 poll daemon socket.
[    2.302881] systemd[1]: Created slice system-getty.slice.
[    2.314709] EXT4-fs (sda3): re-mounted. Opts: stripe=8191
[    2.340130] random: systemd-random-: uninitialized urandom read (512 bytes read)
[    2.341131] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    2.341188] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    2.342057] random: lvm: uninitialized urandom read (4 bytes read)
[    2.351857] usb 1-7: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
[    2.351861] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.627568] systemd-journald[277]: Received request to flush runtime journal from PID 1
[    2.703460] random: crng init done
[    2.790663] ACPI: AC Adapter [ADP0] (on-line)
[    2.847704] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[    2.848442] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input5
[    2.858269] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    2.858307] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.862705] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    2.862707] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    2.881742] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    2.903862] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    2.903864] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.903865] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.903866] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    2.903867] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    2.928294] battery: ACPI: Battery Slot [BAT0] (battery present)
[    2.935823] r8168: loading out-of-tree module taints kernel.
[    2.936013] r8168: module verification failed: signature and/or required key missing - tainting kernel
[    2.967786] cryptd: max_cpu_qlen set to 1000
[    2.978629] r8168 Gigabit Ethernet driver 8.047.02-NAPI loaded
[    2.978642] r8168 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.009054] AVX2 version of gcm_enc/dec engaged.
[    3.009056] AES CTR mode by8 optimization enabled
[    3.021797] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[    3.023810] r8168  Copyright (C) 2019  Realtek NIC software team <nicfae@realtek.com> 
                This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. 
                This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. 
[    3.052308] iTCO_vendor_support: vendor-support=0
[    3.056398] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.056453] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[    3.056597] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.089363] Bluetooth: Core ver 2.22
[    3.089382] NET: Registered protocol family 31
[    3.089384] Bluetooth: HCI device and connection manager initialized
[    3.089388] Bluetooth: HCI socket layer initialized
[    3.089391] Bluetooth: L2CAP socket layer initialized
[    3.089396] Bluetooth: SCO socket layer initialized
[    3.098769] r8168 0000:02:00.0 enp2s0: renamed from eth0
[    3.114640] intel-spi intel-spi: s25fl064k (8192 Kbytes)
[    3.134295] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
[    3.134605] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    3.134608] snd_hda_codec_conexant hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.134611] snd_hda_codec_conexant hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[    3.134612] snd_hda_codec_conexant hdaudioC1D0:    mono: mono_out=0x0
[    3.134614] snd_hda_codec_conexant hdaudioC1D0:    inputs:
[    3.134616] snd_hda_codec_conexant hdaudioC1D0:      Internal Mic=0x1a
[    3.134618] snd_hda_codec_conexant hdaudioC1D0:      Mic=0x19
[    3.135403] snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication
[    3.141928] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[    3.142013] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[    3.152650] Creating 1 MTD partitions on "intel-spi":
[    3.152654] 0x000000000000-0x000000800000 : "BIOS"
[    3.212851] usbcore: registered new interface driver btusb
[    3.231406] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.233018] Bluetooth: hci0: read Intel version: 3707100100012d0d27
[    3.233020] Bluetooth: hci0: Intel device is already patched. patch num: 27
[    3.257266] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.259411] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.259414] cfg80211: failed to load regulatory.db
[    3.282739] checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
[    3.282741] fb0: switching to inteldrmfb from EFI VGA
[    3.282765] Console: switching to colour dummy device 80x25
[    3.285425] i915 0000:00:02.0: vgaarb: deactivate vga console
[    3.301234] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.301236] [drm] Driver supports precise vblank timestamp query.
[    3.301963] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GFX0._DSM.ECR1], AE_NOT_FOUND (20190509/psargs-330)
[    3.301974] ACPI Error: Aborting method \_SB.PCI0.GFX0._DSM due to previous error (AE_NOT_FOUND) (20190509/psparse-529)
[    3.302001] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.333181] media: Linux media interface: v0.10
[    3.345342] [drm] Initialized i915 1.6.0 20190417 for 0000:00:02.0 on minor 0
[    3.348523] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.348875] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    3.349075] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.353811] fbcon: i915drmfb (fb0) is primary device
[    3.383425] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[    3.383506] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[    3.383576] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[    3.383648] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    3.383718] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[    3.391812] Intel(R) Wireless WiFi driver for Linux
[    3.391813] Copyright(c) 2003- 2015 Intel Corporation
[    3.402012] iwlwifi 0000:03:00.0: loaded firmware version 17.3216344376.0 op_mode iwlmvm
[    3.418824] videodev: Linux video capture interface: v2.00
[    3.421034] Adding 8388476k swap on /dev/sda2.  Priority:-2 extents:1 across:8388476k FS
[    3.495390] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0c45:6513)
[    3.544393] uvcvideo 1-6:1.0: Entity type for entity Extension 3 was not initialized!
[    3.544396] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
[    3.544398] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[    3.544504] input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input16
[    3.544606] usbcore: registered new interface driver uvcvideo
[    3.544608] USB Video Class driver (1.1.1)
[    3.574391] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
[    3.598131] iwlwifi 0000:03:00.0: base HW address: d0:7e:35:97:c9:c1
[    3.608424] intel_rapl: Found RAPL domain package
[    3.608426] intel_rapl: Found RAPL domain core
[    3.608427] intel_rapl: Found RAPL domain uncore
[    3.608429] intel_rapl: Found RAPL domain dram
[    3.608434] intel_rapl: RAPL package 0 domain package locked by BIOS
[    3.608439] intel_rapl: RAPL package 0 domain dram locked by BIOS
[    3.713724] [drm] amdgpu kernel modesetting enabled.
[    3.713749] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[    3.714018] ATPX version 1, functions 0x00000033
[    3.714297] ATPX Hybrid Graphics
[    3.714362] CRAT table not found
[    3.714366] Virtual CRAT table created for CPU
[    3.714367] Parsing CRAT table with 1 nodes
[    3.714374] Creating topology SYSFS entries
[    3.714390] Topology: Add CPU node
[    3.714391] Finished initializing topology
[    3.714482] amdgpu 0000:04:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xb0000000 -> 0xbfffffff
[    3.714484] amdgpu 0000:04:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xd1000000 -> 0xd103ffff
[    3.726423] 8021q: 802.1Q VLAN Support v1.8
[    3.727823] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    3.732704] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    3.756476] enp2s0: 0xffffa91b81add000, 68:f7:28:72:cb:d6, IRQ 49
[    4.046064] psmouse serio1: synaptics: queried max coordinates: x [..5670], y [..4794]
[    4.093826] psmouse serio1: synaptics: queried min coordinates: x [1314..], y [1098..]
[    4.194167] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x2a800/0x0, board id: 2848, fw id: 1581875
[    4.255869] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[    4.266698] mousedev: PS/2 mouse device common for all mice
[    4.664302] Console: switching to colour frame buffer device 240x67
[    4.692696] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    4.693135] [drm] initializing kernel modesetting (HAINAN 0x1002:0x666F 0x17AA:0x390C 0x00).
[    4.694436] [drm] register mmio base: 0xD1000000
[    4.694438] [drm] register mmio size: 262144
[    4.694453] [drm] add ip block number 0 <si_common>
[    4.694454] [drm] add ip block number 1 <gmc_v6_0>
[    4.694455] [drm] add ip block number 2 <si_ih>
[    4.694456] [drm] add ip block number 3 <gfx_v6_0>
[    4.694457] [drm] add ip block number 4 <si_dma>
[    4.694458] [drm] add ip block number 5 <si_dpm>
[    4.694461] amdgpu 0000:04:00.0: kfd not supported on this ASIC
[    4.694638] vga_switcheroo: enabled
[    4.727273] ATOM BIOS: 113-xxx-Xxx
[    4.727288] [drm] GPU posting now...
[    4.731553] [drm] RAS INFO: ras initialized successfully, hardware ability[0] ras_mask[0]
[    4.731559] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    4.732415] amdgpu 0000:04:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[    4.732417] amdgpu 0000:04:00.0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[    4.732543] [drm] Detected VRAM RAM=2048M, BAR=256M
[    4.732544] [drm] RAM width 64bits DDR3
[    4.733233] [TTM] Zone  kernel: Available graphics memory: 6103962 KiB
[    4.733235] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[    4.733236] [TTM] Initializing pool allocator
[    4.733240] [TTM] Initializing DMA pool allocator
[    4.733277] [drm] amdgpu: 2048M of VRAM memory ready
[    4.733280] [drm] amdgpu: 3072M of GTT memory ready.
[    4.733295] [drm] GART: num cpu pages 65536, num gpu pages 65536
[    4.733914] amdgpu 0000:04:00.0: PCIE GART of 256M enabled (table at 0x000000F400000000).
[    4.733981] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.733981] [drm] Driver supports precise vblank timestamp query.
[    4.736044] [drm] Internal thermal controller with fan control
[    4.736053] [drm] amdgpu: dpm initialized
[    4.736561] [drm] PCIE gen 2 link speeds already enabled
[    5.136173] amdgpu 0000:04:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring gfx test failed (-110)
[    5.136255] [drm:amdgpu_device_init.cold [amdgpu]] *ERROR* hw_init of IP block <gfx_v6_0> failed -110
[    5.136257] amdgpu 0000:04:00.0: amdgpu_device_ip_init failed
[    5.136259] amdgpu 0000:04:00.0: Fatal error during GPU init
[    5.136261] [drm] amdgpu: finishing device.
[    5.137576] [TTM] Finalizing pool allocator
[    5.137579] [TTM] Finalizing DMA pool allocator
[    5.137604] [TTM] Zone  kernel: Used memory at exit: 0 KiB
[    5.137607] [TTM] Zone   dma32: Used memory at exit: 0 KiB
[    5.137609] [drm] amdgpu: ttm finalized
[    5.137843] vga_switcheroo: disabled
[    5.138121] amdgpu: probe of 0000:04:00.0 failed with error -110
[    6.992354] r8168: enp2s0: link up
[    6.992411] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[  255.633370] fuse: init (API version 7.31)
[  256.259811] rfkill: input handler disabled
[chingdim@G5080 ~]$ 

Offline

#8 2019-07-27 00:18:50

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 7,459

Re: Radeon R5 M230 failed when booting, then disabled

AMD videocard and related software naming tends to be confusing.

For kernel parameters it goes like this :
si_support refers to ALL gcn 1 cards, while cik_support refers to all gcn 2 cards.


With the amdgpu kernel module there's a bit more detail in the error messages.
The problem looks like it has to do with bios/uefi firmware settings  (especially iommu related) and MAY be solvable.

What is brand and model of the laptop ?
Are you running latest uefi/bios firmware ?


Multi-init booting with apg Openrc and systemd coexisting
Automounting : not needed, i prefer pmount
Aur helpers : makepkg + my own local repo === rarely need them

Offline

#9 2019-07-27 06:50:36

ChingDim
Member
Registered: 2019-07-22
Posts: 36

Re: Radeon R5 M230 failed when booting, then disabled

It’s a Lenovo G50-80, bought back in June 2015. I believe it’s the latest firmware update.

I might just reinstall it later

Last edited by ChingDim (2019-07-27 07:00:25)

Offline

#10 2019-07-27 19:04:36

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 7,459

Re: Radeon R5 M230 failed when booting, then disabled

Re-installing archlinux won't solve the issue.

Some settings in your firmware block linux from using the amd card, windows probably works around that in software.
It may be possible to change the firmware settings to support linux, but I can't find a manual describing the uefi/bios setup for your laptop.
I have found a "user guide" and hardware maintenance guide , but no user manual .


Multi-init booting with apg Openrc and systemd coexisting
Automounting : not needed, i prefer pmount
Aur helpers : makepkg + my own local repo === rarely need them

Offline

#11 2019-07-29 14:15:43

ChingDim
Member
Registered: 2019-07-22
Posts: 36

Re: Radeon R5 M230 failed when booting, then disabled

Thanks for your explanation, do you need me to send you some pics of my settings?

Offline

#12 2019-07-30 06:41:00

ChingDim
Member
Registered: 2019-07-22
Posts: 36

Re: Radeon R5 M230 failed when booting, then disabled

It could be a bug in UEFI but not BIOS because I heard that many Radeon drivers do fail with UEFI, not sure if it’ll be the case

Offline

#13 2019-07-30 12:36:41

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 7,459

Re: Radeon R5 M230 failed when booting, then disabled

Since approx 2014 all firmware used on x86-64 boards have been uefi, bios doesn't exist anymore for new systems.

Unfortunately many uefi firmwares are buggy or only tested for majority use cases .


Laptop firmwares are notorious for not allowing many settings, but let's see how lenovo does it.
Yes, upload pics of the main pages of your firmware.


Multi-init booting with apg Openrc and systemd coexisting
Automounting : not needed, i prefer pmount
Aur helpers : makepkg + my own local repo === rarely need them

Offline

#14 2019-07-30 18:26:32

ChingDim
Member
Registered: 2019-07-22
Posts: 36

Re: Radeon R5 M230 failed when booting, then disabled

Sorry but I can't boot Arch yesterday, messed around with GRUB and now it works again,
I'll upload pics soon

Offline

#15 2019-07-31 04:56:48

ChingDim
Member
Registered: 2019-07-22
Posts: 36

Re: Radeon R5 M230 failed when booting, then disabled

I have no idea why the image preview is rotated in this forum, the link shows a portrait image.

https://cdn.discordapp.com/attachments/ … image0.jpg

Mod note: Removed oversized image -- V1del

Last edited by V1del (2019-07-31 07:31:33)

Offline

#16 2019-07-31 07:39:49

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 7,994

Re: Radeon R5 M230 failed when booting, then disabled

Please only post thumbnails or links to images

FWIW the image is actually stored rotated "incorrectly" it just contains a rotation hint in the metadata which probably isn't simply honored by a default embedded img tag.

Offline

#17 2019-08-01 11:43:37

ChingDim
Member
Registered: 2019-07-22
Posts: 36

Re: Radeon R5 M230 failed when booting, then disabled

The only settings about GPU is the Graphic Device . There is an option which enabled only iGPU and both GPUs.. Discrete is the later one

Offline

#18 2019-08-01 23:45:11

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 7,459

Re: Radeon R5 M230 failed when booting, then disabled

Was kinda hoping for more/other options, but they'll have to do.

What was Graphics Device set to when you took the dmesg ?
If you're not sure, just take new dmesg logs with each of the settings.


Multi-init booting with apg Openrc and systemd coexisting
Automounting : not needed, i prefer pmount
Aur helpers : makepkg + my own local repo === rarely need them

Offline

#19 2019-08-02 13:42:32

ChingDim
Member
Registered: 2019-07-22
Posts: 36

Re: Radeon R5 M230 failed when booting, then disabled

It is always Discrete. I have never set it to integrated. 
The only other option not shown in the screenshot in the firmware is secure boot. I have it disabled.

Last edited by ChingDim (2019-08-02 13:44:01)

Offline

#20 2019-08-02 15:29:39

ChingDim
Member
Registered: 2019-07-22
Posts: 36

Re: Radeon R5 M230 failed when booting, then disabled

On a side note I can't launch minecraft. Specifically, the iGPU "lacks OpenGL extensions"

Offline

#21 2019-08-02 22:57:43

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 7,459

Re: Radeon R5 M230 failed when booting, then disabled

It is always Discrete. I have never set it to integrated.

That's weird and prompted me to re-check posted logs.


I now think this is what happens :

Your system uses Hybrid Graphics
Discrete makes laptop boot with amd card as primary video output
linux notices amd card is not starting and switches to intel card as primary

Please post your xorg logfile.

Last edited by Lone_Wolf (2019-08-02 22:59:59)


Multi-init booting with apg Openrc and systemd coexisting
Automounting : not needed, i prefer pmount
Aur helpers : makepkg + my own local repo === rarely need them

Offline

#22 2019-08-03 15:27:31

ChingDim
Member
Registered: 2019-07-22
Posts: 36

Re: Radeon R5 M230 failed when booting, then disabled

This is from ~/.local/share/xorg/Xorg.1.log

[    21.942] _XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
[    21.942] _XSERVTransMakeAllCOTSServerListeners: server already running
[    21.942] (--) Log file renamed from "/home/chingdim/.local/share/xorg/Xorg.pid-759.log" to "/home/chingdim/.local/share/xorg/Xorg.1.log"
[    21.943] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[    21.943] 
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[    21.943] Build Operating System: Linux Arch Linux
[    21.943] Current Operating System: Linux G5080 5.2.2-arch1-1-ARCH #1 SMP PREEMPT Sun Jul 21 19:18:34 UTC 2019 x86_64
[    21.943] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e996181c-f329-41a0-9db3-8c36b0ed4cd4 rw audit=0 loglevel=3 quiet
[    21.943] Build Date: 30 June 2019  09:52:01AM
[    21.943]  
[    21.943] Current version of pixman: 0.38.4
[    21.943] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    21.943] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    21.943] (==) Log file: "/home/chingdim/.local/share/xorg/Xorg.1.log", Time: Fri Jul 26 13:28:35 2019
[    21.943] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    21.943] (==) No Layout section.  Using the first Screen section.
[    21.943] (==) No screen section available. Using defaults.
[    21.943] (**) |-->Screen "Default Screen Section" (0)
[    21.943] (**) |   |-->Monitor "<default monitor>"
[    21.943] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    21.943] (==) Automatically adding devices
[    21.943] (==) Automatically enabling devices
[    21.944] (==) Automatically adding GPU devices
[    21.944] (==) Automatically binding GPU devices
[    21.944] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    21.944] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    21.944] 	Entry deleted from font path.
[    21.944] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[    21.944] 	Entry deleted from font path.
[    21.944] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    21.944] 	Entry deleted from font path.
[    21.944] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    21.944] 	Entry deleted from font path.
[    21.944] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    21.944] 	Entry deleted from font path.
[    21.944] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    21.944] 	Entry deleted from font path.
[    21.944] (==) FontPath set to:
	
[    21.944] (==) ModulePath set to "/usr/lib/xorg/modules"
[    21.944] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    21.944] (II) Module ABI versions:
[    21.944] 	X.Org ANSI C Emulation: 0.4
[    21.944] 	X.Org Video Driver: 24.0
[    21.944] 	X.Org XInput driver : 24.1
[    21.944] 	X.Org Server Extension : 10.0
[    21.944] (++) using VT number 2

[    21.947] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[    21.948] (II) xfree86: Adding drm device (/dev/dri/card1)
[    21.948] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 12 paused 0
[    21.949] (II) xfree86: Adding drm device (/dev/dri/card0)
[    21.949] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0
[    21.951] (--) PCI:*(0@0:2:0) 8086:1616:17aa:390c rev 9, Mem @ 0xd0000000/16777216, 0xc0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[    21.951] (--) PCI: (4@0:0:0) 1002:666f:17aa:390c rev 0, Mem @ 0xb0000000/268435456, 0xd1000000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[    21.951] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    21.951] (II) LoadModule: "glx"
[    21.952] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    21.953] (II) Module glx: vendor="X.Org Foundation"
[    21.953] 	compiled for 1.20.5, module version = 1.0.0
[    21.953] 	ABI class: X.Org Server Extension, version 10.0
[    21.953] (II) Applying OutputClass "Radeon" to /dev/dri/card0
[    21.953] 	loading driver: radeon
[    21.953] (==) Matched intel as autoconfigured driver 0
[    21.953] (==) Matched radeon as autoconfigured driver 1
[    21.953] (==) Matched ati as autoconfigured driver 2
[    21.953] (==) Matched modesetting as autoconfigured driver 3
[    21.953] (==) Matched fbdev as autoconfigured driver 4
[    21.953] (==) Matched vesa as autoconfigured driver 5
[    21.953] (==) Assigned the driver to the xf86ConfigLayout
[    21.953] (II) LoadModule: "intel"
[    21.953] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    21.953] (II) Module intel: vendor="X.Org Foundation"
[    21.953] 	compiled for 1.20.5, module version = 2.99.917
[    21.953] 	Module class: X.Org Video Driver
[    21.953] 	ABI class: X.Org Video Driver, version 24.0
[    21.953] (II) LoadModule: "radeon"
[    21.953] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    21.954] (II) Module radeon: vendor="X.Org Foundation"
[    21.954] 	compiled for 1.20.4, module version = 19.0.1
[    21.954] 	Module class: X.Org Video Driver
[    21.954] 	ABI class: X.Org Video Driver, version 24.0
[    21.954] (II) LoadModule: "ati"
[    21.954] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    21.954] (II) Module ati: vendor="X.Org Foundation"
[    21.954] 	compiled for 1.20.4, module version = 19.0.1
[    21.954] 	Module class: X.Org Video Driver
[    21.954] 	ABI class: X.Org Video Driver, version 24.0
[    21.954] (II) LoadModule: "modesetting"
[    21.954] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    21.954] (II) Module modesetting: vendor="X.Org Foundation"
[    21.954] 	compiled for 1.20.5, module version = 1.20.5
[    21.954] 	Module class: X.Org Video Driver
[    21.954] 	ABI class: X.Org Video Driver, version 24.0
[    21.954] (II) LoadModule: "fbdev"
[    21.954] (WW) Warning, couldn't open module fbdev
[    21.955] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    21.955] (II) LoadModule: "vesa"
[    21.955] (WW) Warning, couldn't open module vesa
[    21.955] (EE) Failed to load module "vesa" (module does not exist, 0)
[    21.955] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    21.955] (II) intel: Driver for Intel(R) HD Graphics
[    21.955] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    21.955] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    21.955] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
	ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
	ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
	ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
	ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
	ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
	ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
	ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
	ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
	ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
	ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
	ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
	ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
	ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
	ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
	ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
	ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
	ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
	ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
	ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
	ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
	ATI Radeon 9800PRO, ATI Radeon 9800XT,
	ATI Radeon Mobility 9600/9700 (M10/M11),
	ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
	ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
	ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
	ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
	ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
	ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
	ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
	ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
	ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
	ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
	ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
	ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
	ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
	ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
	ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
	ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
	ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
	ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
	ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
	ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
	ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
	ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
	ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
	ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
	ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
	ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
	ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
	ATI FireGL V3350, ATI Mobility Radeon X1450,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
	ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
	ATI FireGL V3400, ATI Mobility FireGL V5250,
	ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
	ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
	ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
	ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
	ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
	ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
	ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
	ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
	ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
	AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
	ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
	ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
	ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
	ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
	ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
	ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
	ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
	ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
	ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
	ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
	ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
	ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
	ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
	ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
	ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
	ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
	ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
	ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
	AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
	AMD Radeon HD 6300 Series Graphics,
	AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
	ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
	AMD Firestream 9350, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
	ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
	REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
	ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
	AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
	AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
	ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
	MULLINS, KAVERI, HAWAII
[    21.958] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    21.958] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    21.958] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20190417
[    21.958] (II) intel(0): SNA compiled from 2.99.917-865-g60022507
[    21.975] (WW) Falling back to old probe method for modesetting
[    21.975] (II) [KMS] Kernel modesetting enabled.
[    21.975] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    21.976] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 5500
[    21.976] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[    21.976] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    21.976] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    21.976] (==) intel(0): RGB weight 888
[    21.976] (==) intel(0): Default visual is TrueColor
[    21.977] (II) intel(0): Output eDP1 has no monitor section
[    21.977] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[    21.977] (II) intel(0): Enabled output eDP1
[    21.977] (II) intel(0): Output HDMI1 has no monitor section
[    21.978] (II) intel(0): Enabled output HDMI1
[    21.978] (II) intel(0): Output DP1 has no monitor section
[    21.978] (II) intel(0): Enabled output DP1
[    21.978] (II) intel(0): Output HDMI2 has no monitor section
[    21.978] (II) intel(0): Enabled output HDMI2
[    21.978] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    21.978] (II) intel(0): Output VIRTUAL1 has no monitor section
[    21.978] (II) intel(0): Enabled output VIRTUAL1
[    21.978] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[    21.978] (==) intel(0): TearFree disabled
[    21.979] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    21.979] (==) intel(0): DPI set to (96, 96)
[    21.979] (II) Loading sub module "dri3"
[    21.979] (II) LoadModule: "dri3"
[    21.979] (II) Module "dri3" already built-in
[    21.979] (II) Loading sub module "dri2"
[    21.979] (II) LoadModule: "dri2"
[    21.979] (II) Module "dri2" already built-in
[    21.979] (II) Loading sub module "present"
[    21.979] (II) LoadModule: "present"
[    21.979] (II) Module "present" already built-in
[    21.979] (==) RADEON(G0): Depth 24, (--) framebuffer bpp 32
[    21.979] (II) RADEON(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    21.979] (==) RADEON(G0): Default visual is TrueColor
[    21.979] (==) RADEON(G0): RGB weight 888
[    21.979] (II) RADEON(G0): Using 8 bits per RGB (8 bit DAC)
[    21.979] (--) RADEON(G0): Chipset: "HAINAN" (ChipID = 0x666f)
[    21.979] (II) Loading sub module "fb"
[    21.979] (II) LoadModule: "fb"
[    21.979] (II) Loading /usr/lib/xorg/modules/libfb.so
[    21.979] (II) Module fb: vendor="X.Org Foundation"
[    21.979] 	compiled for 1.20.5, module version = 1.0.0
[    21.979] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    21.979] (II) RADEON(G0): GPU accel disabled or not working, using shadowfb for KMS
[    21.979] (II) Loading sub module "shadow"
[    21.979] (II) LoadModule: "shadow"
[    21.980] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    21.980] (II) Module shadow: vendor="X.Org Foundation"
[    21.980] 	compiled for 1.20.5, module version = 1.1.0
[    21.980] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    21.980] (II) RADEON(G0): KMS Color Tiling: disabled
[    21.980] (II) RADEON(G0): KMS Color Tiling 2D: disabled
[    21.980] (II) RADEON(G0): mem size init: gart size :80000000 vram size: s:10000000 visible:ffbf000
[    21.980] (II) RADEON(G0): EXA: Driver will allow EXA pixmaps in VRAM
[    21.980] (==) RADEON(G0): DPI set to (96, 96)
[    21.980] (==) RADEON(G0): Using gamma correction (1.0, 1.0, 1.0)
[    21.980] (II) Loading sub module "ramdac"
[    21.980] (II) LoadModule: "ramdac"
[    21.980] (II) Module "ramdac" already built-in
[    21.980] (II) UnloadModule: "modesetting"
[    21.980] (II) Unloading modesetting
[    21.980] (II) RADEON(G0): Front buffer size: 3072K
[    21.980] (II) RADEON(G0): VRAM usage limit set to 232930K
[    21.980] (==) RADEON(G0): Backing store enabled
[    21.980] (WW) RADEON(G0): Direct rendering disabled
[    21.980] (II) RADEON(G0): Acceleration disabled
[    21.980] (==) RADEON(G0): DPMS enabled
[    21.980] (==) RADEON(G0): Silken mouse disabled
[    21.981] (II) intel(0): SNA initialized with Broadwell (gen8) backend
[    21.981] (==) intel(0): Backing store enabled
[    21.981] (==) intel(0): Silken mouse disabled
[    21.981] (II) intel(0): HW Cursor enabled
[    21.981] (==) intel(0): DPMS enabled
[    21.981] (==) intel(0): Display hotplug detection enabled
[    21.981] (II) intel(0): [DRI2] Setup complete
[    21.981] (II) intel(0): [DRI2]   DRI driver: i965
[    21.981] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    21.981] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[    21.981] (II) intel(0): hardware support for Present enabled
[    21.981] (II) Initializing extension Generic Event Extension
[    21.981] (II) Initializing extension SHAPE
[    21.982] (II) Initializing extension MIT-SHM
[    21.982] (II) Initializing extension XInputExtension
[    21.982] (II) Initializing extension XTEST
[    21.982] (II) Initializing extension BIG-REQUESTS
[    21.982] (II) Initializing extension SYNC
[    21.982] (II) Initializing extension XKEYBOARD
[    21.982] (II) Initializing extension XC-MISC
[    21.982] (II) Initializing extension SECURITY
[    21.982] (II) Initializing extension XFIXES
[    21.982] (II) Initializing extension RENDER
[    21.982] (II) Initializing extension RANDR
[    21.982] (II) Initializing extension COMPOSITE
[    21.982] (II) Initializing extension DAMAGE
[    21.982] (II) Initializing extension MIT-SCREEN-SAVER
[    21.982] (II) Initializing extension DOUBLE-BUFFER
[    21.982] (II) Initializing extension RECORD
[    21.982] (II) Initializing extension DPMS
[    21.982] (II) Initializing extension Present
[    21.982] (II) Initializing extension DRI3
[    21.982] (II) Initializing extension X-Resource
[    21.982] (II) Initializing extension XVideo
[    21.982] (II) Initializing extension XVideo-MotionCompensation
[    21.982] (II) Initializing extension GLX
[    21.995] (II) AIGLX: Loaded and initialized i965
[    21.995] (II) GLX: Initialized DRI2 GL provider for screen 0
[    21.995] (II) Initializing extension XFree86-VidModeExtension
[    21.995] (II) Initializing extension XFree86-DGA
[    21.995] (II) Initializing extension XFree86-DRI
[    21.995] (II) Initializing extension DRI2
[    22.002] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    22.012] (II) intel(0): Setting screen physical size to 508 x 285
[    22.045] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    22.045] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    22.045] (II) LoadModule: "libinput"
[    22.045] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    22.046] (II) Module libinput: vendor="X.Org Foundation"
[    22.046] 	compiled for 1.20.3, module version = 0.28.2
[    22.046] 	Module class: X.Org XInput Driver
[    22.046] 	ABI class: X.Org XInput driver, version 24.1
[    22.046] (II) Using input driver 'libinput' for 'Power Button'
[    22.047] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 19 paused 0
[    22.047] (**) Power Button: always reports core events
[    22.047] (**) Option "Device" "/dev/input/event2"
[    22.047] (**) Option "_source" "server/udev"
[    22.049] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    22.049] (II) event2  - Power Button: device is a keyboard
[    22.049] (II) event2  - Power Button: device removed
[    22.049] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    22.049] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    22.049] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    22.049] (II) event2  - Power Button: device is a keyboard
[    22.050] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[    22.050] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    22.050] (II) Using input driver 'libinput' for 'Video Bus'
[    22.051] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 22 paused 0
[    22.051] (**) Video Bus: always reports core events
[    22.051] (**) Option "Device" "/dev/input/event9"
[    22.051] (**) Option "_source" "server/udev"
[    22.052] (II) event9  - Video Bus: is tagged by udev as: Keyboard
[    22.052] (II) event9  - Video Bus: device is a keyboard
[    22.052] (II) event9  - Video Bus: device removed
[    22.052] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event9"
[    22.052] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    22.053] (II) event9  - Video Bus: is tagged by udev as: Keyboard
[    22.053] (II) event9  - Video Bus: device is a keyboard
[    22.053] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    22.053] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    22.053] (II) Using input driver 'libinput' for 'Power Button'
[    22.054] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 23 paused 0
[    22.054] (**) Power Button: always reports core events
[    22.054] (**) Option "Device" "/dev/input/event1"
[    22.054] (**) Option "_source" "server/udev"
[    22.055] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    22.055] (II) event1  - Power Button: device is a keyboard
[    22.055] (II) event1  - Power Button: device removed
[    22.055] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    22.055] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    22.056] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    22.056] (II) event1  - Power Button: device is a keyboard
[    22.056] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    22.056] (II) No input driver specified, ignoring this device.
[    22.056] (II) This device may have been added with another device file.
[    22.057] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event10)
[    22.057] (II) No input driver specified, ignoring this device.
[    22.057] (II) This device may have been added with another device file.
[    22.057] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event11)
[    22.057] (II) No input driver specified, ignoring this device.
[    22.057] (II) This device may have been added with another device file.
[    22.058] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event12)
[    22.058] (II) No input driver specified, ignoring this device.
[    22.058] (II) This device may have been added with another device file.
[    22.058] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=9 (/dev/input/event13)
[    22.058] (II) No input driver specified, ignoring this device.
[    22.058] (II) This device may have been added with another device file.
[    22.058] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=10 (/dev/input/event14)
[    22.058] (II) No input driver specified, ignoring this device.
[    22.058] (II) This device may have been added with another device file.
[    22.059] (II) config/udev: Adding input device Lenovo EasyCamera: Lenovo EasyC (/dev/input/event6)
[    22.059] (**) Lenovo EasyCamera: Lenovo EasyC: Applying InputClass "libinput keyboard catchall"
[    22.059] (II) Using input driver 'libinput' for 'Lenovo EasyCamera: Lenovo EasyC'
[    22.060] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 24 paused 0
[    22.060] (**) Lenovo EasyCamera: Lenovo EasyC: always reports core events
[    22.060] (**) Option "Device" "/dev/input/event6"
[    22.060] (**) Option "_source" "server/udev"
[    22.061] (II) event6  - Lenovo EasyCamera: Lenovo EasyC: is tagged by udev as: Keyboard
[    22.061] (II) event6  - Lenovo EasyCamera: Lenovo EasyC: device is a keyboard
[    22.061] (II) event6  - Lenovo EasyCamera: Lenovo EasyC: device removed
[    22.061] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input8/event6"
[    22.061] (II) XINPUT: Adding extended input device "Lenovo EasyCamera: Lenovo EasyC" (type: KEYBOARD, id 9)
[    22.062] (II) event6  - Lenovo EasyCamera: Lenovo EasyC: is tagged by udev as: Keyboard
[    22.062] (II) event6  - Lenovo EasyCamera: Lenovo EasyC: device is a keyboard
[    22.063] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[    22.063] (II) No input driver specified, ignoring this device.
[    22.063] (II) This device may have been added with another device file.
[    22.063] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[    22.063] (II) No input driver specified, ignoring this device.
[    22.063] (II) This device may have been added with another device file.
[    22.064] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event4)
[    22.064] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[    22.064] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[    22.064] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 25 paused 0
[    22.065] (**) Ideapad extra buttons: always reports core events
[    22.065] (**) Option "Device" "/dev/input/event4"
[    22.065] (**) Option "_source" "server/udev"
[    22.066] (II) event4  - Ideapad extra buttons: is tagged by udev as: Keyboard
[    22.066] (II) event4  - Ideapad extra buttons: device is a keyboard
[    22.066] (II) event4  - Ideapad extra buttons: device removed
[    22.066] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input5/event4"
[    22.066] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 10)
[    22.067] (II) event4  - Ideapad extra buttons: is tagged by udev as: Keyboard
[    22.067] (II) event4  - Ideapad extra buttons: device is a keyboard
[    22.068] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    22.068] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    22.068] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    22.068] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 26 paused 0
[    22.068] (**) AT Translated Set 2 keyboard: always reports core events
[    22.068] (**) Option "Device" "/dev/input/event3"
[    22.068] (**) Option "_source" "server/udev"
[    22.069] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    22.069] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    22.070] (II) event3  - AT Translated Set 2 keyboard: device removed
[    22.070] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    22.070] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    22.071] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    22.071] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    22.072] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[    22.072] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    22.072] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    22.072] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 27 paused 0
[    22.072] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    22.072] (**) Option "Device" "/dev/input/event15"
[    22.073] (**) Option "_source" "server/udev"
[    22.074] (II) event15 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[    22.081] (II) event15 - SynPS/2 Synaptics TouchPad: device is a touchpad
[    22.081] (II) event15 - SynPS/2 Synaptics TouchPad: device removed
[    22.081] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event15"
[    22.081] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[    22.082] (**) Option "AccelerationScheme" "none"
[    22.082] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[    22.082] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    22.082] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    22.083] (II) event15 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[    22.090] (II) event15 - SynPS/2 Synaptics TouchPad: device is a touchpad
[    22.091] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    22.091] (II) No input driver specified, ignoring this device.
[    22.091] (II) This device may have been added with another device file.
[    22.091] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    22.091] (II) No input driver specified, ignoring this device.
[    22.091] (II) This device may have been added with another device file.
[    22.384] (II) intel(0): EDID vendor "AUO", prod id 14317
[    22.384] (II) intel(0): Printing DDC gathered Modelines:
[    22.384] (II) intel(0): Modeline "1920x1080"x0.0  142.00  1920 2028 2076 2100  1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[   141.831] (**) Option "fd" "19"
[   141.831] (II) event2  - Power Button: device removed
[   141.831] (**) Option "fd" "22"
[   141.831] (II) event9  - Video Bus: device removed
[   141.831] (**) Option "fd" "23"
[   141.831] (II) event1  - Power Button: device removed
[   141.844] (**) Option "fd" "24"
[   141.844] (II) event6  - Lenovo EasyCamera: Lenovo EasyC: device removed
[   141.844] (**) Option "fd" "25"
[   141.844] (II) event4  - Ideapad extra buttons: device removed
[   141.844] (**) Option "fd" "26"
[   141.844] (II) event3  - AT Translated Set 2 keyboard: device removed
[   141.844] (**) Option "fd" "27"
[   141.844] (II) event15 - SynPS/2 Synaptics TouchPad: device removed
[   141.845] (II) UnloadModule: "libinput"
[   141.845] (II) systemd-logind: releasing fd for 13:79
[   141.895] (II) UnloadModule: "libinput"
[   141.895] (II) systemd-logind: releasing fd for 13:67
[   141.918] (II) UnloadModule: "libinput"
[   141.918] (II) systemd-logind: releasing fd for 13:68
[   141.942] (II) UnloadModule: "libinput"
[   141.942] (II) systemd-logind: releasing fd for 13:70
[   141.975] (II) UnloadModule: "libinput"
[   141.975] (II) systemd-logind: releasing fd for 13:65
[   141.998] (II) UnloadModule: "libinput"
[   141.998] (II) systemd-logind: releasing fd for 13:73
[   142.065] (II) UnloadModule: "libinput"
[   142.065] (II) systemd-logind: releasing fd for 13:66
[   142.158] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[   142.158] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[   142.158] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[   142.514] (II) Server terminated successfully (0). Closing log file.

Offline

#23 2019-08-03 22:27:11

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 7,459

Re: Radeon R5 M230 failed when booting, then disabled

[    21.951] (--) PCI:*(0@0:2:0) 8086:1616:17aa:390c rev 9, Mem @ 0xd0000000/16777216, 0xc0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[    21.951] (--) PCI: (4@0:0:0) 1002:666f:17aa:390c rev 0, Mem @ 0xb0000000/268435456, 0xd1000000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072

The entry with the * is the primary videocard.
Comparing this with lspci ouput the intel IGPU is indeed the primary one, while the amd card is secondary.

Please clarify which options you can choose for "Graphics Device"  in bios firmware.


Multi-init booting with apg Openrc and systemd coexisting
Automounting : not needed, i prefer pmount
Aur helpers : makepkg + my own local repo === rarely need them

Offline

#24 2019-08-04 11:08:29

ChingDim
Member
Registered: 2019-07-22
Posts: 36

Re: Radeon R5 M230 failed when booting, then disabled

Offline

#25 2019-08-06 11:52:53

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 7,459

Re: Radeon R5 M230 failed when booting, then disabled

Thx, keep it on discrete.

Since the intel gpu is your primary gpu, let's try to delay loading amd stuff as long as possible.

Setup your mkinitcpio.conf to execute early kms start for the i915 kernel module and remove any references to amdgpu and radeon from mkinitcpio.conf .

temporarily add

module_blacklist=radeon,amdgpu

to the kernel parameters .

Move

radeon.si_support=0 amdgpu.si_support=1

out of grub configuration/kernel command line



Boot to console and login as root.

Use lsmod to verify whether amdgpu or radeon are loaded.
In case they are, try removing them with rmmod .

Then run

modprobe amdgpu si_support=1

post dmesg .

Last edited by Lone_Wolf (2019-08-06 11:54:25)


Multi-init booting with apg Openrc and systemd coexisting
Automounting : not needed, i prefer pmount
Aur helpers : makepkg + my own local repo === rarely need them

Offline

Board footer

Powered by FluxBB