You are not logged in.

Pages: 1 2

#1 2019-10-20 21:36:52

gavjnn
Member
Registered: 2019-10-20
Posts: 15

Difficulty starting i3wm

I've been trying to figure out how to run i3wm on boot, and I was trying to follow the arch wiki but I don't really understand it and what I'm doing isn't working. Now though, when I reboot my laptop, in order to run i3wm I have to run 

startx /usr/bin/i3

and when previously that would immediately load i3, now I have to repeatedly return 

Ctrl+C

in order to get it to load or it'll just timeout and force me to reboot my laptop again. Anyone know why this is/how I can fix it?
This is my ~/.xinitrc file:

#!/bin/sh

userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/.Xresources
sysmodmap=/etc/X11/xinit/.Xmodmap

# merge in defaults and keymaps

if [ -f $sysresources ]; then







    xrdb -merge $sysresources

fi

if [ -f $sysmodmap ]; then
    xmodmap $sysmodmap
fi

if [ -f "$userresources" ]; then







    xrdb -merge "$userresources"

fi

if [ -f "$usermodmap" ]; then
    xmodmap "$usermodmap"
fi

# start some nice programs

if [ -d /etc/X11/xinit/xinitrc.d ] ; then
 for f in /etc/X11/xinit/xinitrc.d/?*.sh ; do
  [ -x "$f" ] && . "$f"
 done
 unset f
fi

exec i3

Last edited by gavjnn (2019-10-21 00:24:08)

Offline

#2 2019-10-20 22:09:35

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,406

Re: Difficulty starting i3wm

Please post command outputs and files in [ code ] [ /code ] tags.

Try enabling early KMS for your graphics chip. The timeout error is usually a race in getting the graphics device ready soon enough.

Offline

#3 2019-10-20 22:37:04

gavjnn
Member
Registered: 2019-10-20
Posts: 15

Re: Difficulty starting i3wm

I tried it but it didn't work. I might mess around with it later and see if retyping it will change something

Offline

#4 2019-10-20 22:50:55

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,426
Website

Re: Difficulty starting i3wm

V1del wrote:

Please post command outputs and files in [ code ] [ /code ] tags.

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#5 2019-10-21 00:26:08

gavjnn
Member
Registered: 2019-10-20
Posts: 15

Re: Difficulty starting i3wm

V1del wrote:

Please post command outputs and files in [ code ] [ /code ] tags.

And I just fixed the code tags, thanks for pointing out how to do that. Also, I have an intel graphics card and followed the wiki steps but I'm still getting the same issue

Offline

#6 2019-10-21 00:33:12

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,526
Website

Re: Difficulty starting i3wm

Please post a complete xorg log from a failed attempt.

"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#7 2019-10-21 01:01:51

gavjnn
Member
Registered: 2019-10-20
Posts: 15

Re: Difficulty starting i3wm

Trilby wrote:

Please post a complete xorg log from a failed attempt.

from 

~/.local/share/xorg/Xorg.0.log
[  2401.405] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[  2401.408] 
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[  2401.414] Build Operating System: Linux Arch Linux
[  2401.416] Current Operating System: Linux gduttererPC 5.3.7-arch1-1-ARCH #1 SMP PREEMPT Fri Oct 18 00:17:03 UTC 2019 x86_64
[  2401.416] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=PARTUUID=0a412a09-6a87-7040-a226-1e962b4aed2b rw
[  2401.420] Build Date: 30 June 2019  09:52:01AM
[  2401.421]  
[  2401.422] Current version of pixman: 0.38.4
[  2401.425] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  2401.425] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2401.431] (==) Log file: "/home/gavin/.local/share/xorg/Xorg.0.log", Time: Sun Oct 20 20:57:41 2019
[  2401.432] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  2401.432] (==) No Layout section.  Using the first Screen section.
[  2401.432] (==) No screen section available. Using defaults.
[  2401.432] (**) |-->Screen "Default Screen Section" (0)
[  2401.432] (**) |   |-->Monitor "<default monitor>"
[  2401.433] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  2401.433] (==) Automatically adding devices
[  2401.433] (==) Automatically enabling devices
[  2401.433] (==) Automatically adding GPU devices
[  2401.433] (==) Automatically binding GPU devices
[  2401.433] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  2401.433] (WW) The directory "/usr/share/fonts/misc" does not exist.
[  2401.433] 	Entry deleted from font path.
[  2401.433] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[  2401.433] 	Entry deleted from font path.
[  2401.433] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[  2401.433] 	Entry deleted from font path.
[  2401.433] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[  2401.433] 	Entry deleted from font path.
[  2401.433] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[  2401.433] 	Entry deleted from font path.
[  2401.433] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[  2401.433] 	Entry deleted from font path.
[  2401.433] (==) FontPath set to:
	
[  2401.433] (==) ModulePath set to "/usr/lib/xorg/modules"
[  2401.433] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  2401.433] (II) Module ABI versions:
[  2401.433] 	X.Org ANSI C Emulation: 0.4
[  2401.433] 	X.Org Video Driver: 24.0
[  2401.433] 	X.Org XInput driver : 24.1
[  2401.433] 	X.Org Server Extension : 10.0
[  2401.434] (++) using VT number 1

[  2401.436] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[  2401.436] (II) xfree86: Adding drm device (/dev/dri/card0)
[  2401.437] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[  2401.438] (--) PCI:*(0@0:2:0) 8086:5917:17aa:3965 rev 7, Mem @ 0xb0000000/16777216, 0xa0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[  2401.438] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  2401.438] (II) LoadModule: "glx"
[  2401.438] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  2401.440] (II) Module glx: vendor="X.Org Foundation"
[  2401.440] 	compiled for 1.20.5, module version = 1.0.0
[  2401.440] 	ABI class: X.Org Server Extension, version 10.0
[  2401.440] (==) Matched intel as autoconfigured driver 0
[  2401.440] (==) Matched modesetting as autoconfigured driver 1
[  2401.440] (==) Matched fbdev as autoconfigured driver 2
[  2401.440] (==) Matched vesa as autoconfigured driver 3
[  2401.440] (==) Assigned the driver to the xf86ConfigLayout
[  2401.440] (II) LoadModule: "intel"
[  2401.440] (WW) Warning, couldn't open module intel
[  2401.440] (EE) Failed to load module "intel" (module does not exist, 0)
[  2401.440] (II) LoadModule: "modesetting"
[  2401.440] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  2401.440] (II) Module modesetting: vendor="X.Org Foundation"
[  2401.440] 	compiled for 1.20.5, module version = 1.20.5
[  2401.440] 	Module class: X.Org Video Driver
[  2401.440] 	ABI class: X.Org Video Driver, version 24.0
[  2401.440] (II) LoadModule: "fbdev"
[  2401.440] (WW) Warning, couldn't open module fbdev
[  2401.440] (EE) Failed to load module "fbdev" (module does not exist, 0)
[  2401.440] (II) LoadModule: "vesa"
[  2401.441] (WW) Warning, couldn't open module vesa
[  2401.441] (EE) Failed to load module "vesa" (module does not exist, 0)
[  2401.441] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  2401.441] (II) modeset(0): using drv /dev/dri/card0
[  2401.441] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[  2401.441] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  2401.441] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[  2401.441] (==) modeset(0): RGB weight 888
[  2401.441] (==) modeset(0): Default visual is TrueColor
[  2401.441] (II) Loading sub module "glamoregl"
[  2401.441] (II) LoadModule: "glamoregl"
[  2401.441] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[  2401.443] (II) Module glamoregl: vendor="X.Org Foundation"
[  2401.443] 	compiled for 1.20.5, module version = 1.0.1
[  2401.443] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  2401.455] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) UHD Graphics 620 (Kabylake GT2) 
[  2401.455] (II) modeset(0): glamor initialized
[  2401.456] (II) modeset(0): Output eDP-1 has no monitor section
[  2401.460] (II) modeset(0): Output HDMI-1 has no monitor section
[  2401.461] (II) modeset(0): EDID for output eDP-1
[  2401.461] (II) modeset(0): Manufacturer: CMN  Model: 15cc  Serial#: 0
[  2401.461] (II) modeset(0): Year: 2014  Week: 20
[  2401.461] (II) modeset(0): EDID Version: 1.4
[  2401.461] (II) modeset(0): Digital Display Input
[  2401.461] (II) modeset(0): 6 bits per channel
[  2401.461] (II) modeset(0): Digital interface is DisplayPort
[  2401.461] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[  2401.461] (II) modeset(0): Gamma: 2.20
[  2401.461] (II) modeset(0): No DPMS capabilities specified
[  2401.461] (II) modeset(0): Supported color encodings: RGB 4:4:4 
[  2401.461] (II) modeset(0): First detailed timing is preferred mode
[  2401.461] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[  2401.461] (II) modeset(0): redX: 0.572 redY: 0.336   greenX: 0.324 greenY: 0.584
[  2401.461] (II) modeset(0): blueX: 0.160 blueY: 0.141   whiteX: 0.313 whiteY: 0.329
[  2401.461] (II) modeset(0): Manufacturer's mask: 0
[  2401.461] (II) modeset(0): Supported detailed timing:
[  2401.461] (II) modeset(0): clock: 76.4 MHz   Image Size:  344 x 193 mm
[  2401.461] (II) modeset(0): h_active: 1366  h_sync: 1434  h_sync_end 1479 h_blank_end 1592 h_border: 0
[  2401.461] (II) modeset(0): v_active: 768  v_sync: 772  v_sync_end 779 v_blanking: 800 v_border: 0
[  2401.461] (II) modeset(0):  N156BGN-E41
[  2401.461] (II) modeset(0):  CMN
[  2401.461] (II) modeset(0):  N156BGN-E41
[  2401.461] (II) modeset(0): EDID (in hex):
[  2401.461] (II) modeset(0): 	00ffffffffffff000daecc1500000000
[  2401.461] (II) modeset(0): 	14180104952213780282059256539529
[  2401.461] (II) modeset(0): 	24505400000001010101010101010101
[  2401.461] (II) modeset(0): 	010101010101da1d56e250002030442d
[  2401.461] (II) modeset(0): 	470058c110000018000000fe004e3135
[  2401.461] (II) modeset(0): 	3642474e2d4534310a20000000fe0043
[  2401.461] (II) modeset(0): 	4d4e0a202020202020202020000000fe
[  2401.461] (II) modeset(0): 	004e31353642474e2d4534310a20004f
[  2401.461] (II) modeset(0): Printing probed modes for output eDP-1
[  2401.461] (II) modeset(0): Modeline "1366x768"x60.0   76.42  1366 1434 1479 1592  768 772 779 800 -hsync -vsync (48.0 kHz eP)
[  2401.461] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[  2401.461] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[  2401.461] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[  2401.461] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[  2401.461] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[  2401.461] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[  2401.461] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[  2401.461] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[  2401.461] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[  2401.461] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[  2401.462] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[  2401.462] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[  2401.462] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[  2401.462] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[  2401.462] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[  2401.462] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[  2401.462] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[  2401.462] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[  2401.462] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[  2401.462] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[  2401.462] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[  2401.462] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[  2401.462] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[  2401.462] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[  2401.462] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[  2401.462] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[  2401.462] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[  2401.462] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[  2401.462] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[  2401.462] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[  2401.462] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[  2401.462] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[  2401.462] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[  2401.462] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[  2401.462] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[  2401.462] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[  2401.462] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[  2401.462] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[  2401.462] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[  2401.462] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[  2401.462] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[  2401.462] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[  2401.462] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[  2401.462] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[  2401.462] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[  2401.462] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[  2401.462] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[  2401.462] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[  2401.462] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[  2401.462] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[  2401.462] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[  2401.462] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[  2401.462] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[  2401.462] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[  2401.462] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[  2401.462] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[  2401.462] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[  2401.462] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[  2401.465] (II) modeset(0): EDID for output HDMI-1
[  2401.465] (II) modeset(0): Output eDP-1 connected
[  2401.465] (II) modeset(0): Output HDMI-1 disconnected
[  2401.465] (II) modeset(0): Using exact sizes for initial modes
[  2401.465] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[  2401.465] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[  2401.465] (==) modeset(0): DPI set to (96, 96)
[  2401.465] (II) Loading sub module "fb"
[  2401.465] (II) LoadModule: "fb"
[  2401.465] (II) Loading /usr/lib/xorg/modules/libfb.so
[  2401.466] (II) Module fb: vendor="X.Org Foundation"
[  2401.466] 	compiled for 1.20.5, module version = 1.0.0
[  2401.466] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  2401.467] (==) modeset(0): Backing store enabled
[  2401.467] (==) modeset(0): Silken mouse disabled
[  2401.533] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[  2401.533] (==) modeset(0): DPMS enabled
[  2401.534] (II) modeset(0): [DRI2] Setup complete
[  2401.535] (II) modeset(0): [DRI2]   DRI driver: i965
[  2401.535] (II) modeset(0): [DRI2]   VDPAU driver: i965
[  2401.535] (II) Initializing extension Generic Event Extension
[  2401.535] (II) Initializing extension SHAPE
[  2401.535] (II) Initializing extension MIT-SHM
[  2401.535] (II) Initializing extension XInputExtension
[  2401.535] (II) Initializing extension XTEST
[  2401.535] (II) Initializing extension BIG-REQUESTS
[  2401.535] (II) Initializing extension SYNC
[  2401.535] (II) Initializing extension XKEYBOARD
[  2401.535] (II) Initializing extension XC-MISC
[  2401.535] (II) Initializing extension SECURITY
[  2401.535] (II) Initializing extension XFIXES
[  2401.535] (II) Initializing extension RENDER
[  2401.535] (II) Initializing extension RANDR
[  2401.535] (II) Initializing extension COMPOSITE
[  2401.535] (II) Initializing extension DAMAGE
[  2401.535] (II) Initializing extension MIT-SCREEN-SAVER
[  2401.535] (II) Initializing extension DOUBLE-BUFFER
[  2401.535] (II) Initializing extension RECORD
[  2401.535] (II) Initializing extension DPMS
[  2401.535] (II) Initializing extension Present
[  2401.535] (II) Initializing extension DRI3
[  2401.535] (II) Initializing extension X-Resource
[  2401.535] (II) Initializing extension XVideo
[  2401.535] (II) Initializing extension XVideo-MotionCompensation
[  2401.535] (II) Initializing extension GLX
[  2401.542] (II) AIGLX: Loaded and initialized i965
[  2401.542] (II) GLX: Initialized DRI2 GL provider for screen 0
[  2401.542] (II) Initializing extension XFree86-VidModeExtension
[  2401.542] (II) Initializing extension XFree86-DGA
[  2401.542] (II) Initializing extension XFree86-DRI
[  2401.542] (II) Initializing extension DRI2
[  2401.544] (II) modeset(0): Damage tracking initialized
[  2401.544] (II) modeset(0): Setting screen physical size to 361 x 203
[  2401.574] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[  2401.574] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  2401.574] (II) LoadModule: "libinput"
[  2401.574] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[  2401.575] (II) Module libinput: vendor="X.Org Foundation"
[  2401.575] 	compiled for 1.20.5, module version = 0.29.0
[  2401.575] 	Module class: X.Org XInput Driver
[  2401.575] 	ABI class: X.Org XInput driver, version 24.1
[  2401.575] (II) Using input driver 'libinput' for 'Video Bus'
[  2401.576] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 14 paused 0
[  2401.576] (**) Video Bus: always reports core events
[  2401.576] (**) Option "Device" "/dev/input/event8"
[  2401.576] (**) Option "_source" "server/udev"
[  2401.578] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[  2401.578] (II) event8  - Video Bus: device is a keyboard
[  2401.578] (II) event8  - Video Bus: device removed
[  2401.578] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15/event8"
[  2401.578] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[  2401.579] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[  2401.579] (II) event8  - Video Bus: device is a keyboard
[  2401.579] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  2401.579] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  2401.579] (II) Using input driver 'libinput' for 'Power Button'
[  2401.580] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 17 paused 0
[  2401.580] (**) Power Button: always reports core events
[  2401.580] (**) Option "Device" "/dev/input/event1"
[  2401.580] (**) Option "_source" "server/udev"
[  2401.581] (II) event1  - Power Button: is tagged by udev as: Keyboard
[  2401.581] (II) event1  - Power Button: device is a keyboard
[  2401.581] (II) event1  - Power Button: device removed
[  2401.581] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[  2401.581] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[  2401.582] (II) event1  - Power Button: is tagged by udev as: Keyboard
[  2401.582] (II) event1  - Power Button: device is a keyboard
[  2401.582] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[  2401.582] (II) No input driver specified, ignoring this device.
[  2401.582] (II) This device may have been added with another device file.
[  2401.583] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event3)
[  2401.583] (**) ELAN Touchscreen: Applying InputClass "libinput touchscreen catchall"
[  2401.583] (II) Using input driver 'libinput' for 'ELAN Touchscreen'
[  2401.584] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 18 paused 0
[  2401.584] (**) ELAN Touchscreen: always reports core events
[  2401.584] (**) Option "Device" "/dev/input/event3"
[  2401.584] (**) Option "_source" "server/udev"
[  2401.585] (II) event3  - ELAN Touchscreen: is tagged by udev as: Touchscreen
[  2401.585] (II) event3  - ELAN Touchscreen: device is a touch device
[  2401.586] (II) event3  - ELAN Touchscreen: device removed
[  2401.586] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:04F3:234F.0001/input/input7/event3"
[  2401.586] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 8)
[  2401.586] (**) Option "AccelerationScheme" "none"
[  2401.586] (**) ELAN Touchscreen: (accel) selected scheme none/0
[  2401.586] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000
[  2401.586] (**) ELAN Touchscreen: (accel) acceleration threshold: 4
[  2401.587] (II) event3  - ELAN Touchscreen: is tagged by udev as: Touchscreen
[  2401.587] (II) event3  - ELAN Touchscreen: device is a touch device
[  2401.588] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse0)
[  2401.588] (II) No input driver specified, ignoring this device.
[  2401.588] (II) This device may have been added with another device file.
[  2401.588] (II) config/udev: Adding input device EasyCamera: EasyCamera (/dev/input/event7)
[  2401.588] (**) EasyCamera: EasyCamera: Applying InputClass "libinput keyboard catchall"
[  2401.588] (II) Using input driver 'libinput' for 'EasyCamera: EasyCamera'
[  2401.589] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 19 paused 0
[  2401.589] (**) EasyCamera: EasyCamera: always reports core events
[  2401.589] (**) Option "Device" "/dev/input/event7"
[  2401.589] (**) Option "_source" "server/udev"
[  2401.590] (II) event7  - EasyCamera: EasyCamera: is tagged by udev as: Keyboard
[  2401.590] (II) event7  - EasyCamera: EasyCamera: device is a keyboard
[  2401.590] (II) event7  - EasyCamera: EasyCamera: device removed
[  2401.590] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input14/event7"
[  2401.590] (II) XINPUT: Adding extended input device "EasyCamera: EasyCamera" (type: KEYBOARD, id 9)
[  2401.592] (II) event7  - EasyCamera: EasyCamera: is tagged by udev as: Keyboard
[  2401.592] (II) event7  - EasyCamera: EasyCamera: device is a keyboard
[  2401.592] (II) config/udev: Adding input device Elan Touchpad (/dev/input/event6)
[  2401.592] (**) Elan Touchpad: Applying InputClass "libinput touchpad catchall"
[  2401.592] (II) Using input driver 'libinput' for 'Elan Touchpad'
[  2401.593] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 20 paused 0
[  2401.593] (**) Elan Touchpad: always reports core events
[  2401.593] (**) Option "Device" "/dev/input/event6"
[  2401.593] (**) Option "_source" "server/udev"
[  2401.594] (II) event6  - Elan Touchpad: is tagged by udev as: Touchpad
[  2401.595] (II) event6  - Elan Touchpad: device is a touchpad
[  2401.595] (II) event6  - Elan Touchpad: device removed
[  2401.595] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN061D:00/input/input13/event6"
[  2401.595] (II) XINPUT: Adding extended input device "Elan Touchpad" (type: TOUCHPAD, id 10)
[  2401.596] (**) Option "AccelerationScheme" "none"
[  2401.596] (**) Elan Touchpad: (accel) selected scheme none/0
[  2401.596] (**) Elan Touchpad: (accel) acceleration factor: 2.000
[  2401.596] (**) Elan Touchpad: (accel) acceleration threshold: 4
[  2401.597] (II) event6  - Elan Touchpad: is tagged by udev as: Touchpad
[  2401.598] (II) event6  - Elan Touchpad: device is a touchpad
[  2401.598] (II) config/udev: Adding input device Elan Touchpad (/dev/input/mouse1)
[  2401.598] (II) No input driver specified, ignoring this device.
[  2401.598] (II) This device may have been added with another device file.
[  2401.599] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event5)
[  2401.599] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[  2401.599] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[  2401.599] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 21 paused 0
[  2401.599] (**) Ideapad extra buttons: always reports core events
[  2401.599] (**) Option "Device" "/dev/input/event5"
[  2401.599] (**) Option "_source" "server/udev"
[  2401.600] (II) event5  - Ideapad extra buttons: is tagged by udev as: Keyboard
[  2401.600] (II) event5  - Ideapad extra buttons: device is a keyboard
[  2401.600] (II) event5  - Ideapad extra buttons: device removed
[  2401.600] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input12/event5"
[  2401.600] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 11)
[  2401.601] (II) event5  - Ideapad extra buttons: is tagged by udev as: Keyboard
[  2401.601] (II) event5  - Ideapad extra buttons: device is a keyboard
[  2401.601] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[  2401.601] (II) No input driver specified, ignoring this device.
[  2401.601] (II) This device may have been added with another device file.
[  2401.601] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[  2401.601] (II) No input driver specified, ignoring this device.
[  2401.601] (II) This device may have been added with another device file.
[  2401.602] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[  2401.602] (II) No input driver specified, ignoring this device.
[  2401.602] (II) This device may have been added with another device file.
[  2401.602] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event12)
[  2401.602] (II) No input driver specified, ignoring this device.
[  2401.602] (II) This device may have been added with another device file.
[  2401.602] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event13)
[  2401.602] (II) No input driver specified, ignoring this device.
[  2401.602] (II) This device may have been added with another device file.
[  2401.602] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event14)
[  2401.602] (II) No input driver specified, ignoring this device.
[  2401.602] (II) This device may have been added with another device file.
[  2401.603] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event15)
[  2401.603] (II) No input driver specified, ignoring this device.
[  2401.603] (II) This device may have been added with another device file.
[  2401.603] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[  2401.603] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[  2401.603] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[  2401.604] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 22 paused 0
[  2401.604] (**) AT Translated Set 2 keyboard: always reports core events
[  2401.604] (**) Option "Device" "/dev/input/event2"
[  2401.604] (**) Option "_source" "server/udev"
[  2401.604] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[  2401.604] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[  2401.605] (II) event2  - AT Translated Set 2 keyboard: device removed
[  2401.605] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[  2401.605] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[  2401.606] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[  2401.606] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[  2401.606] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[  2401.606] (II) No input driver specified, ignoring this device.
[  2401.606] (II) This device may have been added with another device file.
[  2401.667] (EE) Failed to open authorization file "/tmp/serverauth.WPzUswEkmW": No such file or directory

Offline

#8 2019-10-21 01:13:32

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,526
Website

Re: Difficulty starting i3wm

Why/what is /tmp/serverauth.*?  Have you specifically configured xauthority for some reason?

What is the output of `echo $XAUTHORITY`?

"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#9 2019-10-21 01:16:44

gavjnn
Member
Registered: 2019-10-20
Posts: 15

Re: Difficulty starting i3wm

Trilby wrote:

Why/what is /tmp/serverauth.*?  Have you specifically configured xauthority for some reason?

What is the output of `echo $XAUTHORITY`?

No, I haven't configured xauthority and this is the output of the command:

/home/gavin/.Xauthority

Offline

#10 2019-10-21 01:41:15

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,526
Website

Re: Difficulty starting i3wm

Hmm, I guess that's not an Xauth issue.  I'm not sure what that error is then.

"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#11 2019-10-21 01:43:20

gavjnn
Member
Registered: 2019-10-20
Posts: 15

Re: Difficulty starting i3wm

For clarification, this all happened after I tried to make my default shell zsh instead of bash. It caused a lot of other issues I was able to fix by switching the defaults, but xinit wasn't soing this before I did that switch so it could be somehow related to that.

Offline

#12 2019-10-21 07:30:02

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,270

Re: Difficulty starting i3wm

What do you mean by "tried"? Did you or did you not? And what is "switching the defaults"?

If you autostarted X11 from your bashrc, that's suprisingly not gonna apply to zsh.
What does your zshrc look like? Did you make other random changes to /etc/profile* or similar files?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#13 2019-10-21 22:58:52

gavjnn
Member
Registered: 2019-10-20
Posts: 15

Re: Difficulty starting i3wm

seth wrote:

What do you mean by "tried"? Did you or did you not? And what is "switching the defaults"?

If you autostarted X11 from your bashrc, that's suprisingly not gonna apply to zsh.
What does your zshrc look like? Did you make other random changes to /etc/profile* or similar files?

When I said tried, I meant tried the solution the first commentor offered (which didn't work). And when I said switching the defaults, I'm talking about my default shell, which was bash, I switched it to zsh, and then back to bash.

Also, I no longer have any zsh or zsh-related files on my laptop. And no, I haven't changed any random files.

Offline

#14 2019-10-21 23:06:42

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,426
Website

Re: Difficulty starting i3wm

Please paste your /etc/fstab and the output of `mount | grep /tmp`.

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#15 2019-10-21 23:20:49

gavjnn
Member
Registered: 2019-10-20
Posts: 15

Re: Difficulty starting i3wm

jasonwryan wrote:

Please paste your /etc/fstab and the output of `mount | grep /tmp`.

/etc/fstab :

# /dev/sda3
UUID=450e74ee-a8aa-4cab-9750-ff866a95a010	/         	ext4      	rw,relatime	0 1

# /dev/sda4
UUID=55eb7374-bfdf-4765-9b9f-d7d8a2747371	/home     	ext4      	rw,relatime	0 2

# /dev/sda1
UUID=6C4B-C925      	/boot     	vfat      	rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro	0 2

# /dev/sda2
UUID=2d55844b-92ef-49a5-b035-90e4d5717322	none      	swap      	defaults  	0 0

The other command just outputs a blank shell.

Offline

#16 2019-10-21 23:57:08

loqs
Member
Registered: 2014-03-06
Posts: 19,098

Re: Difficulty starting i3wm

If you create a new user.  login as the new user.

$ cp /etc/X11/xinit/xinitrc ~/.xinitrc
startx /usr/bin/i3

Does that work?

Offline

#17 2019-10-22 00:28:12

gavjnn
Member
Registered: 2019-10-20
Posts: 15

Re: Difficulty starting i3wm

loqs wrote:

If you create a new user.  login as the new user.

$ cp /etc/X11/xinit/xinitrc ~/.xinitrc
startx /usr/bin/i3

Does that work?

I did that with a new user and now I can't access i3 from my original user. Even after I deleted the old user and rebooted it won't work. I have to type on phone now, but here's the errors I got when running the startx command from my original user:

Fatal server error
xf86OpenConsole: Cannot open virtual console 1 (Permission Denied)
Please consult The X.Org Foundation support at http://wiki.x.org for help
Please check the log file at "/home/gavin/.local/share/xorg/Xorg.0.log" for additional information. (I also can't open this log file for some reason)
Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: unexpected signal 2

Last edited by gavjnn (2019-10-22 00:31:00)

Offline

#18 2019-10-22 00:31:54

loqs
Member
Registered: 2014-03-06
Posts: 19,098

Re: Difficulty starting i3wm

What was the result for the new user?

Offline

#19 2019-10-22 00:32:12

gavjnn
Member
Registered: 2019-10-20
Posts: 15

Re: Difficulty starting i3wm

gavjnn wrote:
loqs wrote:

If you create a new user.  login as the new user.

$ cp /etc/X11/xinit/xinitrc ~/.xinitrc
startx /usr/bin/i3

Does that work?

I did that with a new user and now I can't access i3 from my original user. Even after I deleted the old user and rebooted it won't work. I have to type on phone now, but here's the errors I got when running the startx command from my original user:

Fatal server error
xf86OpenConsole: Cannot open virtual console 1 (Permission Denied)
Please consult The X.Org Foundation support at http://wiki.x.org for help
Please check the log file at "/home/gavin/.local/share/xorg/Xorg.0.log" for additional information. (I also can't open this log file for some reason)
Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: unexpected signal 2

Actually, just rebooted again and now I can run through my original user. I still have the same issue with typing the Cs, but it's not a huge deal. I'd like to have it automatically boot into i3, but for the time being it's not terrible to type in those extra Cs

Last edited by gavjnn (2019-10-22 00:32:36)

Offline

#20 2019-10-22 00:34:58

gavjnn
Member
Registered: 2019-10-20
Posts: 15

Re: Difficulty starting i3wm

loqs wrote:

What was the result for the new user?

Pretty much the same errors I described in the last message with the error list

Offline

#21 2019-10-22 00:45:52

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,426
Website

Re: Difficulty starting i3wm

gavjnn wrote:
loqs wrote:

What was the result for the new user?

Pretty much the same errors I described in the last message with the error list

Did you completely log out as the original user? If not, that would explain the blocked TTY.

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#22 2019-10-22 00:47:19

gavjnn
Member
Registered: 2019-10-20
Posts: 15

Re: Difficulty starting i3wm

jasonwryan wrote:
gavjnn wrote:
loqs wrote:

What was the result for the new user?

Pretty much the same errors I described in the last message with the error list

Did you completely log out as the original user? If not, that would explain the blocked TTY.

Yes, I rebooted before I did the startx command as the new user

Offline

#23 2019-10-22 07:08:14

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,270

Re: Difficulty starting i3wm

The other command just outputs a blank shell.

So your /tmp is on the root FS?

stat /tmp
df -P /tmp

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#24 2019-10-22 10:11:15

loqs
Member
Registered: 2014-03-06
Posts: 19,098

Re: Difficulty starting i3wm

The output of the following as well please

systemctl status tmp.mount

Offline

#25 2019-10-22 22:34:33

gavjnn
Member
Registered: 2019-10-20
Posts: 15

Re: Difficulty starting i3wm

seth wrote:

The other command just outputs a blank shell.

So your /tmp is on the root FS?

stat /tmp
df -P /tmp

stat /tmp

  File: /tmp
  Size: 220       	Blocks: 0          IO Block: 4096   directory
Device: 2fh/47d	Inode: 3779        Links: 10
Access: (1777/drwxrwxrwt)  Uid: (    0/    root)   Gid: (    0/    root)
Access: 2019-10-22 18:26:44.654868438 -0400
Modify: 2019-10-22 18:28:44.574870548 -0400
Change: 2019-10-22 18:28:44.574870548 -0400
 Birth: -

df -P /tmp

Filesystem     1024-blocks  Used Available Capacity Mounted on
tmpfs              6088708     4   6088704       1% /tmp
loqs wrote:

The output of the following as well please

systemctl status tmp.mount

● tmp.mount - Temporary Directory (/tmp)
   Loaded: loaded (/usr/lib/systemd/system/tmp.mount; static; vendor preset: >
   Active: active (mounted) since Tue 2019-10-22 18:26:44 EDT; 6min ago
    Where: /tmp
     What: tmpfs
     Docs: https://systemd.io/TEMPORARY_DIRECTORIES
           man:file-hierarchy(7)
           https://www.freedesktop.org/wiki/Software/systemd/APIFileSystems
    Tasks: 0
   Memory: 0B
   CGroup: /system.slice/tmp.mount

Oct 22 18:26:44 gduttererPC systemd[1]: Mounting Temporary Directory (/tmp)...
Oct 22 18:26:44 gduttererPC systemd[1]: Mounted Temporary Directory (/tmp).

Offline

Pages: 1 2

Board footer

Powered by FluxBB