You are not logged in.

#1 2019-11-14 01:07:36

Deniz
Member
Registered: 2019-11-11
Posts: 3

[SOLVED]Failed to take device '/dev/dri/card0':Operation not permitted

I am trying to set up the window manager sway -> https://wiki.archlinux.org/index.php/Sway

Background: Typing sway in a TTY was working immediately after installing sway, but soon after (maybe after reboot i'm not sure) it just randomly stopped working and started giving me these errors.

sway -d output

2019-11-13 18:49:55 - [sway/server.c:39] Preparing Wayland server initialization
2019-11-13 18:49:55 - [backend/session/logind.c:675] Successfully loaded logind session
2019-11-13 18:49:55 - [backend/session/logind.c:73] Failed to take device '/dev/dri/card0': Operation not permitted
2019-11-13 18:49:55 - [backend/backend.c:192] Found 0 GPUs
2019-11-13 18:49:55 - [backend/backend.c:339] Failed to open any DRM device
2019-11-13 18:49:55 - [backend/noop/backend.c:51] Creating noop backend
2019-11-13 18:49:55 - [sway/server.c:46] Unable to create backend

The fixes that worked for most people were
  1. Add user to group video
  2. Early KMS -> https://wiki.archlinux.org/index.php/Ke … _KMS_start

These did not work for me and after a lot researching I have decided that I need some else's help. I will gladly read any links to the wiki. Thanks!

Last edited by Deniz (2019-11-14 22:27:39)

Offline

#2 2019-11-14 12:46:43

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 8,470

Re: [SOLVED]Failed to take device '/dev/dri/card0':Operation not permitted

Please post full lspci -k , dmesg and/or journalctl -b .

Welcome to the forums.


Multi-init booting with apg Openrc and systemd coexisting
Automounting : not needed, i prefer pmount
Aur helpers : makepkg + my own local repo === rarely need them

Offline

#3 2019-11-14 15:17:06

loqs
Member
Registered: 2014-03-06
Posts: 11,825

Re: [SOLVED]Failed to take device '/dev/dri/card0':Operation not permitted

As a test could you please try

# systemctl edit --full systemd-logind.service

and remove all lines starting DeviceAllow
then reboot and retest if that has no effect you can restore the service file to its original with

# systemctl  revert systemd-logind.service

Offline

#4 2019-11-14 21:38:43

Deniz
Member
Registered: 2019-11-11
Posts: 3

Re: [SOLVED]Failed to take device '/dev/dri/card0':Operation not permitted

Thank you both for responding!

Removing all lines starting with DeviceAllow worked. If possible can you explain what this is doing and/or link me to something that does?
Also I get the feeling that this is not a permanent solution but idk.

lspci -k

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 05)
        Subsystem: Lenovo Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers
        Kernel driver in use: skl_uncore
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 630 (rev 04)
        Subsystem: Lenovo HD Graphics 630
        Kernel driver in use: i915
        Kernel modules: i915
00:14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31)
        Subsystem: Lenovo 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci
00:14.2 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem (rev 31)
        Subsystem: Lenovo 100 Series/C230 Series Chipset Family Thermal Subsystem
        Kernel driver in use: intel_pch_thermal
        Kernel modules: intel_pch_thermal
00:16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 (rev 31)
        Subsystem: Lenovo 100 Series/C230 Series Chipset Family MEI Controller
        Kernel driver in use: mei_me
        Kernel modules: mei_me
00:17.0 SATA controller: Intel Corporation HM170/QM170 Chipset SATA Controller [AHCI Mode] (rev 31)
        Subsystem: Lenovo HM170/QM170 Chipset SATA Controller [AHCI Mode]
        Kernel driver in use: ahci
        Kernel modules: ahci
00:1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #2 (rev f1)
        Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #3 (rev f1)
        Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #4 (rev f1)
        Kernel driver in use: pcieport
00:1d.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #9 (rev f1)
        Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation HM175 Chipset LPC/eSPI Controller (rev 31)
        Subsystem: Lenovo HM175 Chipset LPC/eSPI Controller
00:1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller (rev 31)
        Subsystem: Lenovo 100 Series/C230 Series Chipset Family Power Management Controller
00:1f.3 Audio device: Intel Corporation CM238 HD Audio Controller (rev 31)
        Subsystem: Lenovo CM238 HD Audio Controller
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel
00:1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (rev 31)
        Subsystem: Lenovo 100 Series/C230 Series Chipset Family SMBus
        Kernel driver in use: i801_smbus
        Kernel modules: i2c_i801
01:00.0 SD Host controller: O2 Micro, Inc. SD/MMC Card Reader Controller (rev 01)
        Subsystem: Lenovo SD/MMC Card Reader Controller
        Kernel driver in use: sdhci-pci
        Kernel modules: sdhci_pci
02:00.0 Network controller: Intel Corporation Wireless 8265 / 8275 (rev 78)
        Subsystem: Intel Corporation Dual Band Wireless-AC 8265
        Kernel driver in use: iwlwifi
        Kernel modules: iwlwifi
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
        Subsystem: Lenovo RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
        Kernel driver in use: r8169
        Kernel modules: r8169
04:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961
        Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961
        Kernel driver in use: nvme

dmesg

[    0.000000] Linux version 5.3.8-arch1-1 (linux@archlinux) (gcc version 9.2.0 (GCC)) #1 SMP PREEMPT @1572357769
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=3a73cac8-9c93-4f0a-bfb3-808a0533b903 rw loglevel=3 quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000072d3efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000072d3f000-0x0000000072d3ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000072d40000-0x0000000072d40fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000072d41000-0x000000008a48dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000008a48e000-0x000000008a68dfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000008a68e000-0x000000008ae7dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008ae7e000-0x000000008ce7dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008ce7e000-0x000000008cefdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008cefe000-0x000000008cefefff] usable
[    0.000000] BIOS-e820: [mem 0x000000008ceff000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000046effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.50 by INSYDE Corp.
[    0.000000] efi:  ACPI 2.0=0x8cefd014  SMBIOS=0x8a702000  SMBIOS 3.0=0x8a700000  ESRT=0x8a6fe558  MEMATTR=0x7ada2018
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: LENOVO 80WK/Provence-5R1, BIOS 4KCN40WW 10/17/2017
[    0.000000] tsc: Detected 2800.000 MHz processor
[    0.000950] tsc: Detected 2799.927 MHz TSC
[    0.000950] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000952] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000959] last_pfn = 0x46f000 max_arch_pfn = 0x400000000
[    0.000962] MTRR default type: write-back
[    0.000962] MTRR fixed ranges enabled:
[    0.000963]   00000-9FFFF write-back
[    0.000964]   A0000-BFFFF uncachable
[    0.000965]   C0000-FFFFF write-protect
[    0.000966] MTRR variable ranges enabled:
[    0.000967]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000968]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.000969]   2 base 0090000000 mask 7FF0000000 uncachable
[    0.000969]   3 base 008E000000 mask 7FFE000000 uncachable
[    0.000970]   4 base 008D800000 mask 7FFF800000 uncachable
[    0.000971]   5 disabled
[    0.000971]   6 disabled
[    0.000972]   7 disabled
[    0.000972]   8 disabled
[    0.000973]   9 disabled
[    0.001437] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.001662] last_pfn = 0x8ceff max_arch_pfn = 0x400000000
[    0.009362] esrt: Reserving ESRT space from 0x000000008a6fe558 to 0x000000008a6fe608.
[    0.009369] check: Scanning 1 areas for low memory corruption
[    0.009372] Using GB pages for direct mapping
[    0.009374] BRK [0x3b5401000, 0x3b5401fff] PGTABLE
[    0.009375] BRK [0x3b5402000, 0x3b5402fff] PGTABLE
[    0.009376] BRK [0x3b5403000, 0x3b5403fff] PGTABLE
[    0.009416] BRK [0x3b5404000, 0x3b5404fff] PGTABLE
[    0.009417] BRK [0x3b5405000, 0x3b5405fff] PGTABLE
[    0.009584] BRK [0x3b5406000, 0x3b5406fff] PGTABLE
[    0.009626] BRK [0x3b5407000, 0x3b5407fff] PGTABLE
[    0.009696] BRK [0x3b5408000, 0x3b5408fff] PGTABLE
[    0.009749] BRK [0x3b5409000, 0x3b5409fff] PGTABLE
[    0.009823] BRK [0x3b540a000, 0x3b540afff] PGTABLE
[    0.009920] Secure boot could not be determined
[    0.009920] RAMDISK: [mem 0x36e13000-0x37700fff]
[    0.009925] ACPI: Early table checksum verification disabled
[    0.009927] ACPI: RSDP 0x000000008CEFD014 000024 (v02 LENOVO)
[    0.009930] ACPI: XSDT 0x000000008CECC188 000104 (v01 LENOVO CB-01    00000001      01000013)
[    0.009935] ACPI: FACP 0x000000008CEEE000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009939] ACPI: DSDT 0x000000008CED5000 015BCF (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009941] ACPI: FACS 0x000000008CE4D000 000040
[    0.009944] ACPI: UEFI 0x000000008CEFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009946] ACPI: UEFI 0x000000008CEFB000 000042 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009948] ACPI: MSDM 0x000000008CEFA000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009950] ACPI: SSDT 0x000000008CEF9000 0004C3 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009953] ACPI: SSDT 0x000000008CEF8000 000046 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009955] ACPI: TPM2 0x000000008CEF7000 000034 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009957] ACPI: SSDT 0x000000008CEF3000 0030A0 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009960] ACPI: ASF! 0x000000008CEF2000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009962] ACPI: ASPT 0x000000008CEF1000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009964] ACPI: BOOT 0x000000008CEF0000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009966] ACPI: DBGP 0x000000008CEEF000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009969] ACPI: HPET 0x000000008CEED000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009971] ACPI: APIC 0x000000008CEEC000 0000BC (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009973] ACPI: MCFG 0x000000008CEEB000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009975] ACPI: LPIT 0x000000008CED4000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009978] ACPI: WSMT 0x000000008CED3000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009980] ACPI: SSDT 0x000000008CED2000 00029F (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009982] ACPI: SSDT 0x000000008CED1000 000346 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009984] ACPI: SSDT 0x000000008CECD000 003002 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009987] ACPI: SSDT 0x000000008CECB000 00051E (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009989] ACPI: DBGP 0x000000008CECA000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009992] ACPI: DBG2 0x000000008CEC9000 000054 (v00 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009994] ACPI: SSDT 0x000000008CEC8000 0002F5 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009996] ACPI: SSDT 0x000000008CEC7000 000EDE (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.009998] ACPI: DMAR 0x000000008CEC6000 0000A8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.010001] ACPI: FPDT 0x000000008CEC5000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.010003] ACPI: BGRT 0x000000008CEC4000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.010009] ACPI: Local APIC address 0xfee00000
[    0.010171] No NUMA configuration found
[    0.010172] Faking a node at [mem 0x0000000000000000-0x000000046effffff]
[    0.010175] NODE_DATA(0) allocated [mem 0x46effc000-0x46effffff]
[    0.010197] Zone ranges:
[    0.010198]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.010199]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.010200]   Normal   [mem 0x0000000100000000-0x000000046effffff]
[    0.010201]   Device   empty
[    0.010201] Movable zone start for each node
[    0.010202] Early memory node ranges
[    0.010203]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.010203]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.010204]   node   0: [mem 0x0000000000100000-0x0000000072d3efff]
[    0.010205]   node   0: [mem 0x0000000072d41000-0x000000008a48dfff]
[    0.010205]   node   0: [mem 0x000000008cefe000-0x000000008cefefff]
[    0.010206]   node   0: [mem 0x0000000100000000-0x000000046effffff]
[    0.010318] Zeroed struct page in unavailable ranges: 23511 pages
[    0.010319] Initmem setup node 0 [mem 0x0000000000001000-0x000000046effffff]
[    0.010320] On node 0 totalpages: 4166697
[    0.010321]   DMA zone: 64 pages used for memmap
[    0.010322]   DMA zone: 22 pages reserved
[    0.010323]   DMA zone: 3996 pages, LIFO batch:0
[    0.010365]   DMA32 zone: 8787 pages used for memmap
[    0.010365]   DMA32 zone: 562317 pages, LIFO batch:63
[    0.016077]   Normal zone: 56256 pages used for memmap
[    0.016078]   Normal zone: 3600384 pages, LIFO batch:63
[    0.044308] Reserving Intel graphics memory at [mem 0x8e000000-0x8fffffff]
[    0.046234] ACPI: PM-Timer IO Port: 0x1808
[    0.046235] ACPI: Local APIC address 0xfee00000
[    0.046240] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.046241] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.046242] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.046242] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.046243] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.046243] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.046244] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.046244] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.046271] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.046273] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.046274] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.046276] ACPI: IRQ0 used by override.
[    0.046277] ACPI: IRQ9 used by override.
[    0.046278] Using ACPI (MADT) for SMP configuration information
[    0.046279] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.046284] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.046301] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.046303] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.046304] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.046306] PM: Registered nosave memory: [mem 0x72d3f000-0x72d3ffff]
[    0.046306] PM: Registered nosave memory: [mem 0x72d40000-0x72d40fff]
[    0.046308] PM: Registered nosave memory: [mem 0x8a48e000-0x8a68dfff]
[    0.046308] PM: Registered nosave memory: [mem 0x8a68e000-0x8ae7dfff]
[    0.046309] PM: Registered nosave memory: [mem 0x8ae7e000-0x8ce7dfff]
[    0.046309] PM: Registered nosave memory: [mem 0x8ce7e000-0x8cefdfff]
[    0.046311] PM: Registered nosave memory: [mem 0x8ceff000-0x8fffffff]
[    0.046311] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[    0.046312] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.046312] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[    0.046313] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[    0.046313] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
[    0.046314] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.046314] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.046315] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.046315] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[    0.046316] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.046316] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[    0.046317] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[    0.046318] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[    0.046318] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.046319] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.046319] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.046321] [mem 0x90000000-0xdfffffff] available for PCI devices
[    0.046322] Booting paravirtualized kernel on bare hardware
[    0.046324] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.132254] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.132417] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[    0.132423] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[    0.132424] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.132442] Built 1 zonelists, mobility grouping on.  Total pages: 4101568
[    0.132443] Policy zone: Normal
[    0.132444] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=3a73cac8-9c93-4f0a-bfb3-808a0533b903 rw loglevel=3 quiet
[    0.133273] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.133652] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.133720] mem auto-init: stack:byref_all, heap alloc:off, heap free:off
[    0.136750] Calgary: detecting Calgary via BIOS EBDA area
[    0.136751] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.165175] Memory: 16243472K/16666788K available (12291K kernel code, 1321K rwdata, 3952K rodata, 1632K init, 3548K bss, 423316K reserved, 0K cma-reserved)
[    0.165283] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.165292] Kernel/User page tables isolation: enabled
[    0.165305] ftrace: allocating 37816 entries in 148 pages
[    0.178604] rcu: Preemptible hierarchical RCU implementation.
[    0.178604] rcu:     CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.178605] rcu:     RCU dyntick-idle grace-period acceleration is enabled.
[    0.178606] rcu:     RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.178606] rcu:     RCU priority boosting: priority 1 delay 500 ms.
[    0.178607]  Tasks RCU enabled.
[    0.178608] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.178608] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.180005] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[    0.180201] rcu:     Offload RCU callbacks from CPUs: (none).
[    0.180339] random: get_random_bytes called from start_kernel+0x3ce/0x5a9 with crng_init=0
[    0.180360] Console: colour dummy device 80x25
[    0.180364] printk: console [tty0] enabled
[    0.180379] ACPI: Core revision 20190703
[    0.180626] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.180694] APIC: Switch to symmetric I/O mode setup
[    0.180696] DMAR: Host address width 39
[    0.180697] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.180701] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.180702] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.180706] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.180707] DMAR: RMRR base: 0x0000008ad52000 end: 0x0000008ad71fff
[    0.180707] DMAR: RMRR base: 0x0000008d800000 end: 0x0000008fffffff
[    0.180709] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.180710] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.180710] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.182178] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.182179] x2apic enabled
[    0.182193] Switched APIC routing to cluster x2apic.
[    0.186136] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.200723] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285bfbafad2, max_idle_ns: 440795215530 ns
[    0.200727] Calibrating delay loop (skipped), value calculated using timer frequency.. 5602.18 BogoMIPS (lpj=9333090)
[    0.200729] pid_max: default: 32768 minimum: 301
[    0.204090] LSM: Security Framework initializing
[    0.204094] Yama: becoming mindful.
[    0.204138] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.204158] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.204288] *** VALIDATE proc ***
[    0.204325] *** VALIDATE cgroup1 ***
[    0.204327] *** VALIDATE cgroup2 ***
[    0.204370] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.204390] process: using mwait in idle threads
[    0.204392] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.204393] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.204395] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.204396] Spectre V2 : Mitigation: Full generic retpoline
[    0.204397] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.204397] Speculative Store Bypass: Vulnerable
[    0.204400] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.204618] Freeing SMP alternatives memory: 32K
[    0.207452] TSC deadline timer enabled
[    0.207457] smpboot: CPU0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[    0.227409] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.227424] ... version:                4
[    0.227426] ... bit width:              48
[    0.227427] ... generic registers:      4
[    0.227429] ... value mask:             0000ffffffffffff
[    0.227431] ... max period:             00007fffffffffff
[    0.227433] ... fixed-purpose events:   3
[    0.227434] ... event mask:             000000070000000f
[    0.234068] rcu: Hierarchical SRCU implementation.
[    0.257617] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.264073] smp: Bringing up secondary CPUs ...
[    0.304094] x86: Booting SMP configuration:
[    0.304097] .... node  #0, CPUs:      #1 #2 #3 #4
[    0.424578] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.464092]  #5 #6 #7
[    0.544501] smp: Brought up 1 node, 8 CPUs
[    0.544501] smpboot: Max logical packages: 1
[    0.544501] smpboot: Total of 8 processors activated (44816.45 BogoMIPS)
[    0.547443] devtmpfs: initialized
[    0.547443] x86/mm: Memory block size: 128MB
[    0.548857] PM: Registering ACPI NVS region [mem 0x72d3f000-0x72d3ffff] (4096 bytes)
[    0.548857] PM: Registering ACPI NVS region [mem 0x8ae7e000-0x8ce7dfff] (33554432 bytes)
[    0.548857] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.548857] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.548857] pinctrl core: initialized pinctrl subsystem
[    0.548857] PM: RTC time: 21:10:46, date: 2019-11-14
[    0.548857] NET: Registered protocol family 16
[    0.548857] audit: initializing netlink subsys (disabled)
[    0.548857] audit: type=2000 audit(1573765846.366:1): state=initialized audit_enabled=0 res=1
[    0.548857] cpuidle: using governor ladder
[    0.550747] cpuidle: using governor menu
[    0.550749] Simple Boot Flag at 0x44 set to 0x1
[    0.550761] KVM setup pv remote TLB flush
[    0.550764] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.550765] ACPI: bus type PCI registered
[    0.550766] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.550823] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.550829] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.550829] PCI: Using configuration type 1 for base access
[    0.552291] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.552291] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.554160] ACPI: Added _OSI(Module Device)
[    0.554161] ACPI: Added _OSI(Processor Device)
[    0.554162] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.554162] ACPI: Added _OSI(Processor Aggregator Device)
[    0.554163] ACPI: Added _OSI(Linux-Dell-Video)
[    0.554164] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.554165] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.582635] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.585012] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.590462] ACPI: Dynamic OEM Table Load:
[    0.590476] ACPI: SSDT 0xFFFF89871C04B000 000651 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.591847] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.592898] ACPI: Dynamic OEM Table Load:
[    0.592904] ACPI: SSDT 0xFFFF89871BE8E000 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.594546] ACPI: Dynamic OEM Table Load:
[    0.594553] ACPI: SSDT 0xFFFF89871C048000 00065C (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.596208] ACPI: Dynamic OEM Table Load:
[    0.596213] ACPI: SSDT 0xFFFF89871BCC7400 00018A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.600172] ACPI: EC: EC started
[    0.600173] ACPI: EC: interrupt blocked
[    0.600468] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.600469] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.600470] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.600471] ACPI: Interpreter enabled
[    0.600516] ACPI: (supports S0 S3 S4 S5)
[    0.600516] ACPI: Using IOAPIC for interrupt routing
[    0.600554] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.601189] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.622507] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.622512] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.625611] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.625612] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.627851] PCI host bridge to bus 0000:00
[    0.627853] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.627854] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.627855] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.627856] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.627857] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.627858] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.627858] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.627859] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.627860] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.627861] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.627862] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.627863] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    0.627863] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.627865] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.627873] pci 0000:00:00.0: [8086:5910] type 00 class 0x060000
[    0.628771] pci 0000:00:02.0: [8086:591b] type 00 class 0x030000
[    0.628781] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb0ffffff 64bit]
[    0.628787] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.628790] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.628804] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.629764] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.629797] pci 0000:00:14.0: reg 0x10: [mem 0xb1410000-0xb141ffff 64bit]
[    0.629896] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.630898] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    0.630931] pci 0000:00:14.2: reg 0x10: [mem 0xb142a000-0xb142afff 64bit]
[    0.631926] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.631956] pci 0000:00:16.0: reg 0x10: [mem 0xb142b000-0xb142bfff 64bit]
[    0.632040] pci 0000:00:16.0: PME# supported from D3hot
[    0.632979] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
[    0.633008] pci 0000:00:17.0: reg 0x10: [mem 0xb1428000-0xb1429fff]
[    0.633019] pci 0000:00:17.0: reg 0x14: [mem 0xb142e000-0xb142e0ff]
[    0.633030] pci 0000:00:17.0: reg 0x18: [io  0x4080-0x4087]
[    0.633041] pci 0000:00:17.0: reg 0x1c: [io  0x4088-0x408b]
[    0.633053] pci 0000:00:17.0: reg 0x20: [io  0x4060-0x407f]
[    0.633064] pci 0000:00:17.0: reg 0x24: [mem 0xb142c000-0xb142c7ff]
[    0.633127] pci 0000:00:17.0: PME# supported from D3hot
[    0.634068] pci 0000:00:1c.0: [8086:a111] type 01 class 0x060400
[    0.634214] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.635189] pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
[    0.635333] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.636296] pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400
[    0.636435] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.637408] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[    0.637551] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.638540] pci 0000:00:1f.0: [8086:a152] type 00 class 0x060100
[    0.639545] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.639566] pci 0000:00:1f.2: reg 0x10: [mem 0xb1424000-0xb1427fff]
[    0.640542] pci 0000:00:1f.3: [8086:a171] type 00 class 0x040300
[    0.640575] pci 0000:00:1f.3: reg 0x10: [mem 0xb1420000-0xb1423fff 64bit]
[    0.640613] pci 0000:00:1f.3: reg 0x20: [mem 0xb1400000-0xb140ffff 64bit]
[    0.640670] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.641654] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.641716] pci 0000:00:1f.4: reg 0x10: [mem 0xb142d000-0xb142d0ff 64bit]
[    0.641786] pci 0000:00:1f.4: reg 0x20: [io  0x4040-0x405f]
[    0.644079] pci 0000:01:00.0: [1217:8621] type 00 class 0x080501
[    0.644112] pci 0000:01:00.0: reg 0x10: [mem 0xb1301000-0xb1301fff]
[    0.644124] pci 0000:01:00.0: reg 0x14: [mem 0xb1300000-0xb13007ff]
[    0.644269] pci 0000:01:00.0: PME# supported from D3hot D3cold
[    0.655833] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.655840] pci 0000:00:1c.0:   bridge window [mem 0xb1300000-0xb13fffff]
[    0.656345] pci 0000:02:00.0: [8086:24fd] type 00 class 0x028000
[    0.656513] pci 0000:02:00.0: reg 0x10: [mem 0xb1200000-0xb1201fff 64bit]
[    0.656976] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.657611] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.657618] pci 0000:00:1c.2:   bridge window [mem 0xb1200000-0xb12fffff]
[    0.657697] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.657732] pci 0000:03:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.657759] pci 0000:03:00.0: reg 0x18: [mem 0xb1104000-0xb1104fff 64bit]
[    0.657777] pci 0000:03:00.0: reg 0x20: [mem 0xb1100000-0xb1103fff 64bit]
[    0.657898] pci 0000:03:00.0: supports D1 D2
[    0.657899] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.658071] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.658075] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.658079] pci 0000:00:1c.3:   bridge window [mem 0xb1100000-0xb11fffff]
[    0.658157] pci 0000:04:00.0: [144d:a804] type 00 class 0x010802
[    0.658199] pci 0000:04:00.0: reg 0x10: [mem 0xb1000000-0xb1003fff 64bit]
[    0.658523] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    0.658529] pci 0000:00:1d.0:   bridge window [mem 0xb1000000-0xb10fffff]
[    0.661005] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.661068] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.661130] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.661191] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.661251] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.661312] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.661372] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.661432] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.662006] ACPI: EC: interrupt unblocked
[    0.662030] ACPI: EC: event unblocked
[    0.662044] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.662046] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[    0.662108] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.662108] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.662108] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.662108] vgaarb: loaded
[    0.662108] ACPI: bus type USB registered
[    0.662108] usbcore: registered new interface driver usbfs
[    0.662108] usbcore: registered new interface driver hub
[    0.662108] usbcore: registered new device driver usb
[    0.662108] pps_core: LinuxPPS API ver. 1 registered
[    0.662108] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.662108] PTP clock support registered
[    0.662108] EDAC MC: Ver: 3.0.0
[    0.662108] Registered efivars operations
[    0.662108] PCI: Using ACPI for IRQ routing
[    0.690449] PCI: pci_cache_line_size set to 64 bytes
[    0.691113] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.691114] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.691115] e820: reserve RAM buffer [mem 0x72d3f000-0x73ffffff]
[    0.691115] e820: reserve RAM buffer [mem 0x8a48e000-0x8bffffff]
[    0.691116] e820: reserve RAM buffer [mem 0x8ceff000-0x8fffffff]
[    0.691117] e820: reserve RAM buffer [mem 0x46f000000-0x46fffffff]
[    0.691194] NetLabel: Initializing
[    0.691195] NetLabel:  domain hash size = 128
[    0.691195] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.691205] NetLabel:  unlabeled traffic allowed by default
[    0.691209] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.691209] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.694068] clocksource: Switched to clocksource tsc-early
[    0.703313] VFS: Disk quotas dquot_6.6.0
[    0.703325] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.703344] *** VALIDATE hugetlbfs ***
[    0.703374] pnp: PnP ACPI init
[    0.703474] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.703476] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.703477] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.703478] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[    0.703479] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.703480] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.703481] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.703485] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.703792] system 00:01: [io  0x2000-0x20fe] has been reserved
[    0.703795] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.703988] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.703989] system 00:02: [io  0xffff] has been reserved
[    0.703990] system 00:02: [io  0xffff] has been reserved
[    0.703991] system 00:02: [io  0xffff] has been reserved
[    0.703992] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.703993] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.703996] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.704097] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.704100] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.704116] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.704155] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.704158] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.704190] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.704210] pnp 00:07: Plug and Play ACPI device, IDs SYN2b96 PNP0f03 (active)
[    0.705365] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.705934] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.705935] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.705937] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.705938] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.705939] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.705940] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.705941] system 00:09: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.705942] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.705943] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.705944] system 00:09: [mem 0x90000000-0x9001ffff] has been reserved
[    0.705947] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.706250] pnp: PnP ACPI: found 10 devices
[    0.707245] thermal_sys: Registered thermal governor 'fair_share'
[    0.707245] thermal_sys: Registered thermal governor 'bang_bang'
[    0.707246] thermal_sys: Registered thermal governor 'step_wise'
[    0.707247] thermal_sys: Registered thermal governor 'user_space'
[    0.707247] thermal_sys: Registered thermal governor 'power_allocator'
[    0.711778] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.711807] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.711814] pci 0000:00:1c.0:   bridge window [mem 0xb1300000-0xb13fffff]
[    0.711824] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.711829] pci 0000:00:1c.2:   bridge window [mem 0xb1200000-0xb12fffff]
[    0.711839] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.711842] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.711847] pci 0000:00:1c.3:   bridge window [mem 0xb1100000-0xb11fffff]
[    0.711857] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    0.711862] pci 0000:00:1d.0:   bridge window [mem 0xb1000000-0xb10fffff]
[    0.711873] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.711874] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.711875] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.711876] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.711877] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.711878] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.711879] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.711879] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.711880] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.711881] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.711882] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.711883] pci_bus 0000:00: resource 15 [mem 0x90000000-0xdfffffff window]
[    0.711884] pci_bus 0000:00: resource 16 [mem 0xfd000000-0xfe7fffff window]
[    0.711885] pci_bus 0000:01: resource 1 [mem 0xb1300000-0xb13fffff]
[    0.711886] pci_bus 0000:02: resource 1 [mem 0xb1200000-0xb12fffff]
[    0.711887] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.711888] pci_bus 0000:03: resource 1 [mem 0xb1100000-0xb11fffff]
[    0.711889] pci_bus 0000:04: resource 1 [mem 0xb1000000-0xb10fffff]
[    0.712034] NET: Registered protocol family 2
[    0.712141] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.712156] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.712263] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.712344] TCP: Hash tables configured (established 131072 bind 65536)
[    0.712363] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.712389] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.712445] NET: Registered protocol family 1
[    0.712448] NET: Registered protocol family 44
[    0.712456] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.714602] PCI: CLS 64 bytes, default 64
[    0.714628] Trying to unpack rootfs image as initramfs...
[    0.834029] Freeing initrd memory: 9144K
[    0.857433] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.857438] software IO TLB: mapped [mem 0x85f16000-0x89f16000] (64MB)
[    0.857630] check: Scanning for low memory corruption every 60 seconds
[    0.857957] Initialise system trusted keyrings
[    0.857964] Key type blacklist registered
[    0.857995] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.859006] zbud: loaded
[    0.863147] Key type asymmetric registered
[    0.863148] Asymmetric key parser 'x509' registered
[    0.863155] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.863185] io scheduler mq-deadline registered
[    0.863186] io scheduler kyber registered
[    0.863209] io scheduler bfq registered
[    0.863585] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[    0.863639] pcieport 0000:00:1c.0: AER: enabled with IRQ 122
[    0.863918] pcieport 0000:00:1c.2: PME: Signaling with IRQ 123
[    0.864161] pcieport 0000:00:1c.3: PME: Signaling with IRQ 124
[    0.864396] pcieport 0000:00:1d.0: PME: Signaling with IRQ 125
[    0.864448] pcieport 0000:00:1d.0: AER: enabled with IRQ 125
[    0.864528] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.864596] efifb: probing for efifb
[    0.864608] efifb: showing boot graphics
[    0.865730] efifb: framebuffer at 0xa0000000, using 8128k, total 8128k
[    0.865731] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.865731] efifb: scrolling: redraw
[    0.865732] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.865762] fbcon: Deferring console take-over
[    0.865763] fb0: EFI VGA frame buffer device
[    0.865769] intel_idle: MWAIT substates: 0x11142120
[    0.865769] intel_idle: v0.4.1 model 0x9E
[    0.866176] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.866246] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.866252] ACPI: Lid Switch [LID0]
[    0.866278] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.866283] ACPI: Power Button [PWRB]
[    0.866306] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.866446] ACPI: Power Button [PWRF]
[    0.867669] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.868092] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.868092] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    0.868884] nvme nvme0: pci function 0000:04:00.0
[    0.868915] usbcore: registered new interface driver usbserial_generic
[    0.868919] usbserial: USB Serial support registered for generic
[    0.868939] rtc_cmos 00:04: RTC can wake from S4
[    0.869534] rtc_cmos 00:04: registered as rtc0
[    0.869549] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.869591] intel_pstate: Intel P-state driver initializing
[    0.869636] intel_pstate: Disabling energy efficiency optimization
[    0.870085] intel_pstate: HWP enabled
[    0.870141] ledtrig-cpu: registered to indicate activity on CPUs
[    0.870241] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:00 [mem 0xfdb00000-0xfdffffff]
[    0.870244] caller pmc_core_probe+0x85/0x2da mapping multiple BARs
[    0.870254] intel_pmc_core intel_pmc_core.0:  initialized
[    0.870434] NET: Registered protocol family 10
[    0.875862] Segment Routing with IPv6
[    0.875877] NET: Registered protocol family 17
[    0.876561] RAS: Correctable Errors collector initialized.
[    0.876586] microcode: sig=0x906e9, pf=0x20, revision=0x5e
[    0.876882] microcode: Microcode Update Driver: v2.2.
[    0.876899] sched_clock: Marking stable (876448112, 430959)->(880537008, -3657937)
[    0.877107] registered taskstats version 1
[    0.877115] Loading compiled-in X.509 certificates
[    0.880186] Loaded X.509 cert 'Build time autogenerated kernel key: e0745f1461fa3807a6a98d0155aaa42f102c5e52'
[    0.880207] zswap: loaded using pool lzo/zbud
[    0.885638] Key type big_key registered
[    0.886598] PM:   Magic number: 11:926:196
[    0.886626] acpi device:51: hash matches
[    0.886797] rtc_cmos 00:04: setting system clock to 2019-11-14T21:10:47 UTC (1573765847)
[    1.094442] nvme nvme0: 8/0/0 default/read/poll queues
[    1.106455]  nvme0n1: p1 p2 p3 p4
[    1.108497] Freeing unused decrypted memory: 2040K
[    1.108920] Freeing unused kernel image memory: 1632K
[    1.124558] Write protecting the kernel read-only data: 18432k
[    1.125337] Freeing unused kernel image memory: 2012K
[    1.125494] Freeing unused kernel image memory: 144K
[    1.139747] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.139749] x86/mm: Checking user space page tables
[    1.153736] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.153738] Run /init as init process
[    1.243507] fbcon: Taking over console
[    1.243551] Console: switching to colour frame buffer device 240x67
[    1.284664] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.289477] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.289530] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.290257] SCSI subsystem initialized
[    1.293604] sdhci: Secure Digital Host Controller Interface driver
[    1.293605] sdhci: Copyright(c) Pierre Ossman
[    1.294222] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.294229] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.295358] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[    1.295365] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.295603] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    1.295605] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.295606] usb usb1: Product: xHCI Host Controller
[    1.295607] usb usb1: Manufacturer: Linux 5.3.8-arch1-1 xhci-hcd
[    1.295608] usb usb1: SerialNumber: 0000:00:14.0
[    1.295713] hub 1-0:1.0: USB hub found
[    1.295745] hub 1-0:1.0: 16 ports detected
[    1.296565] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.296569] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.296572] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.296609] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[    1.296611] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.296612] usb usb2: Product: xHCI Host Controller
[    1.296613] usb usb2: Manufacturer: Linux 5.3.8-arch1-1 xhci-hcd
[    1.296614] usb usb2: SerialNumber: 0000:00:14.0
[    1.296698] hub 2-0:1.0: USB hub found
[    1.296712] hub 2-0:1.0: 8 ports detected
[    1.296829] usb: port power management may be unreliable
[    1.297404] sdhci-pci 0000:01:00.0: SDHCI controller found [1217:8621] (rev 1)
[    1.298036] mmc0: SDHCI controller on PCI [0000:01:00.0] using ADMA
[    1.300802] libata version 3.00 loaded.
[    1.303210] ahci 0000:00:17.0: version 3.0
[    1.308356] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.313514] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x4 impl SATA mode
[    1.313516] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
[    1.313989] scsi host0: ahci
[    1.314156] scsi host1: ahci
[    1.314490] scsi host2: ahci
[    1.314578] ata1: DUMMY
[    1.314579] ata2: DUMMY
[    1.314581] ata3: SATA max UDMA/133 abar m2048@0xb142c000 port 0xb142c200 irq 137
[    1.624358] usb 1-6: new high-speed USB device number 2 using xhci_hcd
[    1.628368] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.747957] usb 1-6: device descriptor read/64, error -71
[    1.758584] ata3.00: ATA-10: ST2000LM007-1R8174, LDM2, max UDMA/133
[    1.758588] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.809319] ata3.00: configured for UDMA/133
[    1.819267] scsi 2:0:0:0: Direct-Access     ATA      ST2000LM007-1R81 LDM2 PQ: 0 ANSI: 5
[    1.825165] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    1.825168] sd 2:0:0:0: [sda] 4096-byte physical blocks
[    1.825192] sd 2:0:0:0: [sda] Write Protect is off
[    1.825194] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.825225] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.861229] tsc: Refined TSC clocksource calibration: 2808.011 MHz
[    1.861242] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879d056a67, max_idle_ns: 440795290248 ns
[    1.861293] clocksource: Switched to clocksource tsc
[    1.928177]  sda: sda1
[    1.929602] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.978016] usb 1-6: device descriptor read/64, error -71
[    2.207581] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[    2.287022] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
[    2.316449] random: fast init done
[    2.330814] usb 1-6: device descriptor read/64, error -71
[    2.393054] systemd[1]: systemd 243.78-2-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    2.408021] systemd[1]: Detected architecture x86-64.
[    2.411715] systemd[1]: Set hostname to <archdeniz>.
[    2.440470] systemd-fstab-generator[300]: Failed to create unit file /run/systemd/generator/home.mount, as it already exists. Duplicate entry in /etc/fstab?
[    2.446313] systemd[296]: /usr/lib/systemd/system-generators/systemd-fstab-generator failed with exit status 1.
[    2.513961] systemd[1]: Created slice system-getty.slice.
[    2.514130] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.514232] systemd[1]: Created slice User and Session Slice.
[    2.514264] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.514285] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.514427] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.525841] EXT4-fs (nvme0n1p3): re-mounted. Opts: (null)
[    2.560769] usb 1-6: device descriptor read/64, error -71
[    2.667460] usb usb1-port6: attempt power cycle
[    2.698110] audit: type=1130 audit(1573765849.307:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.702869] systemd-journald[311]: Received client request to flush runtime journal.
[    2.731436] audit: type=1130 audit(1573765849.341:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.748585] ACPI: AC Adapter [ADP0] (on-line)
[    2.760200] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    2.798254] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    2.798307] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    2.803286] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    2.806267] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    2.820768] Adding 25165820k swap on /dev/nvme0n1p2.  Priority:-2 extents:1 across:25165820k SSFS
[    2.830457] audit: type=1130 audit(1573765849.437:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-c60ee635\x2d3452\x2d4d6d\x2db9d3\x2ddefef1a14a02 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.840318] EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: (null)
[    2.850886] battery: ACPI: Battery Slot [BAT0] (battery present)
[    2.853255] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6
[    2.864173] audit: type=1130 audit(1573765849.474:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.868385] Linux agpgart interface v0.103
[    2.869523] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    2.869524] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.869525] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.869525] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    2.869526] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    2.910401] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.910667] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.914847] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.915275] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.915277] cfg80211: failed to load regulatory.db
[    2.921943] libphy: r8169: probed
[    2.922082] r8169 0000:03:00.0 eth0: RTL8168gu/8111gu, c8:5b:76:e4:ed:77, XID 509, IRQ 139
[    2.922083] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.929075] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    2.945985] audit: type=1130 audit(1573765849.554:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.950109] audit: type=1127 audit(1573765849.557:7): pid=389 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[    2.954388] audit: type=1130 audit(1573765849.564:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.957172] audit: type=1130 audit(1573765849.564:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.960539] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[    2.964089] cryptd: max_cpu_qlen set to 1000
[    2.968065] iTCO_vendor_support: vendor-support=0
[    2.974695] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[    2.980673] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    2.981199] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.981333] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    2.981448] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.004756] audit: type=1130 audit(1573765849.614:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.005662] random: NetworkManager: uninitialized urandom read (16 bytes read)
[    3.032495] 8021q: 802.1Q VLAN Support v1.8
[    3.032537] Intel(R) Wireless WiFi driver for Linux
[    3.032537] Copyright(c) 2003- 2015 Intel Corporation
[    3.045902] iwlwifi 0000:02:00.0: Found debug destination: EXTERNAL_DRAM
[    3.045905] iwlwifi 0000:02:00.0: Found debug configuration: 0
[    3.046279] iwlwifi 0000:02:00.0: loaded firmware version 36.77d01142.0 op_mode iwlmvm
[    3.053309] Generic Realtek PHY r8169-300:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[    3.101282] AVX2 version of gcm_enc/dec engaged.
[    3.101282] AES CTR mode by8 optimization enabled
[    3.168043] r8169 0000:03:00.0 enp3s0: Link is Down
[    3.245050] checking generic (a0000000 7f0000) vs hw (a0000000 10000000)
[    3.245052] fb0: switching to inteldrmfb from EFI VGA
[    3.245104] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
[    3.247467] Console: switching to colour dummy device 80x25
[    3.247511] i915 0000:00:02.0: vgaarb: deactivate vga console
[    3.248922] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.248923] [drm] Driver supports precise vblank timestamp query.
[    3.249405] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.250299] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    3.250463] mei_hdcp mei::b638ab7e-94e2-4ea2-a552-d1c54b627f04:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[    3.253419] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[    3.253626] iwlwifi 0000:02:00.0: Allocated 0x00400000 bytes for firmware monitor.
[    3.268024] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[    3.270518] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.270772] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    3.270930] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.309395] iwlwifi 0000:02:00.0: base HW address: 00:28:f8:a0:5f:2d
[    3.310761] usb 1-6: new high-speed USB device number 4 using xhci_hcd
[    3.385077] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    3.385319] thermal thermal_zone1: failed to read out thermal zone (-61)
[    3.387681] fbcon: i915drmfb (fb0) is primary device
[    3.390812] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    3.399081] Console: switching to colour frame buffer device 240x67
[    3.418335] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    3.434101] usb 1-6: device descriptor read/64, error -71
[    3.438078] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[    3.464016] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    3.464018] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.464019] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    3.464020] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.464020] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.464021] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
[    3.464022] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    3.502774] random: crng init done
[    3.502776] random: 1 urandom warning(s) missed due to ratelimiting
[    3.505106] intel_rapl_common: Found RAPL domain package
[    3.505107] intel_rapl_common: Found RAPL domain core
[    3.505108] intel_rapl_common: Found RAPL domain uncore
[    3.505109] intel_rapl_common: Found RAPL domain dram
[    3.517345] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[    3.517407] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    3.517456] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    3.517499] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    3.517540] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    3.517581] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    3.517621] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    3.517662] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    3.575140] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[    3.643017] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring
[    3.667518] usb 1-6: device descriptor read/64, error -71
[    3.684726] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[    3.783387] psmouse serio1: synaptics: queried max coordinates: x [..5670], y [..4744]
[    3.818162] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[    3.819303] psmouse serio1: synaptics: queried min coordinates: x [1272..], y [1108..]
[    3.819309] psmouse serio1: synaptics: Your touchpad (PNP: SYN2b96 PNP0f03) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    3.885221] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring
[    3.895958] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x26800/0x440000, board id: 3287, fw id: 2469908
[    3.897462] usb 1-6: new high-speed USB device number 5 using xhci_hcd
[    3.946136] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[    3.951389] mousedev: PS/2 mouse device common for all mice
[    4.020844] usb 1-6: device descriptor read/64, error -71
[    4.250888] usb 1-6: device descriptor read/64, error -71
[    4.357503] usb usb1-port6: unable to enumerate USB device
[    4.480796] usb 1-11: new full-speed USB device number 6 using xhci_hcd
[    4.622167] usb 1-11: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.10
[    4.622170] usb 1-11: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.670868] Bluetooth: Core ver 2.22
[    4.670882] NET: Registered protocol family 31
[    4.670883] Bluetooth: HCI device and connection manager initialized
[    4.670885] Bluetooth: HCI socket layer initialized
[    4.670886] Bluetooth: L2CAP socket layer initialized
[    4.670888] Bluetooth: SCO socket layer initialized
[    4.679121] usbcore: registered new interface driver btusb
[    4.679469] Bluetooth: hci0: Firmware revision 0.1 build 50 week 12 2019
[    4.688370] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx
[    4.688378] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[    6.936080] kauditd_printk_skb: 11 callbacks suppressed
[    6.936081] audit: type=1006 audit(1573765853.544:22): pid=419 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[    6.947242] audit: type=1130 audit(1573765853.554:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.952765] audit: type=1006 audit(1573765853.561:24): pid=523 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[    6.995219] audit: type=1130 audit(1573765853.604:25): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.687377] audit: type=1131 audit(1573765856.294:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.016695] audit: type=1131 audit(1573765860.624:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.582767] audit: type=1130 audit(1573765861.191:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   25.015804] audit: type=1131 audit(1573765871.624:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   33.248748] audit: type=1131 audit(1573765879.857:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   83.511677] audit: type=1006 audit(1573765930.121:31): pid=575 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1

journalctl -b

Nov 14 15:10:53 archdeniz systemd[523]: Reached target Paths.
Nov 14 15:10:53 archdeniz systemd[523]: Reached target Timers.
Nov 14 15:10:53 archdeniz systemd[523]: Starting D-Bus User Message Bus Socket.
Nov 14 15:10:53 archdeniz systemd[523]: Listening on GnuPG network certificate management daemon.
Nov 14 15:10:53 archdeniz systemd[523]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).
Nov 14 15:10:53 archdeniz systemd[523]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
Nov 14 15:10:53 archdeniz systemd[523]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
Nov 14 15:10:53 archdeniz systemd[523]: Listening on GnuPG cryptographic agent and passphrase cache.
Nov 14 15:10:53 archdeniz systemd[523]: Listening on p11-kit server.
Nov 14 15:10:53 archdeniz systemd[523]: Listening on D-Bus User Message Bus Socket.
Nov 14 15:10:53 archdeniz systemd[523]: Reached target Sockets.
Nov 14 15:10:53 archdeniz systemd[523]: Reached target Basic System.
Nov 14 15:10:53 archdeniz systemd[523]: Reached target Main User Target.
Nov 14 15:10:53 archdeniz systemd[523]: Startup finished in 38ms.

Offline

#5 2019-11-14 22:06:32

loqs
Member
Registered: 2014-03-06
Posts: 11,825

Re: [SOLVED]Failed to take device '/dev/dri/card0':Operation not permitted

Certainly although the explanation is somewhat long.

man 5 systemd.resource-control wrote:

       DevicePolicy=auto|closed|strict
           Control the policy for allowing device access:

           strict
               means to only allow types of access that are explicitly
               specified.

           closed
               in addition, allows access to standard pseudo devices including
               /dev/null, /dev/zero, /dev/full, /dev/random, and /dev/urandom.

           auto
               in addition, allows access to all devices if no explicit
               DeviceAllow= is present. This is the default.

As systemd-logind.service does not contain a DevicePolicy entry the default of auto is used and from the above removing the DeviceAllow entries allows access to all devices.

With systemd 243 [1] restricted device access [2] loaded the drm module needed by [1]
however that does not appear to be enough for sway to access /dev/dri/card0

upstream bug report is https://github.com/systemd/systemd/issues/13943 if you could work with upstream to fix the issue correctly that would be great.

[1] https://github.com/systemd/systemd/comm … acab0bdec5
[2] https://github.com/systemd/systemd/comm … fa2a15d3b0

Edit:
The output of `getfacl /dev/dri/card0` might help upstream if the request from https://github.com/systemd/systemd/issu … -551436318 does not work
for you which from your initial post I would not expect it to.

Last edited by loqs (2019-11-14 22:14:02)

Offline

#6 2019-11-14 22:54:02

latalante1
Member
Registered: 2018-08-30
Posts: 75

Re: [SOLVED]Failed to take device '/dev/dri/card0':Operation not permitted

The problem arises in too late initialization of drm. Solution - correctly generate initramfs (certainly yours was inappropriate).

Systemd,  including systemd-logind.service  starts up much earlier than DRM.

[    2.393054] systemd[1]: systemd 243.78-2-arch running in system mode.
[...]
[    3.268024] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0

The second after systemd, DRM is loaded.


For me it looks quite different.

[1.169683] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[...]
[3.491801] Run /sbin/init as init process
[4.241608] systemd[1]: systemd 243.78-2-arch running in system mode

Of course, you can blame the whole evil of this world on systemd, report bugs and forget about them without breaking the subject.

I've already read about "Kernel panic - not syncing", now I see a change of subject - "systemd-logind Operation not permitted".

Offline

#7 2019-11-14 23:05:44

loqs
Member
Registered: 2014-03-06
Posts: 11,825

Re: [SOLVED]Failed to take device '/dev/dri/card0':Operation not permitted

latalante1 wrote:

The problem arises in too late initialization of drm. Solution - correctly generate initramfs (certainly yours was inappropriate).

Where in the systemd commit log or release notes is such a change in requirements document?
Where in the bug report I referenced does upstream indicate that is required?

latalante1 wrote:

Of course, you can blame the whole evil of this world on systemd, report bugs and forget about them without breaking the subject.

Who are you suggesting is doing that?  If this is intended why was the upstream bug report not closed as working as intended?

Last edited by loqs (2019-11-14 23:07:00)

Offline

#8 2019-11-14 23:08:13

progandy
Member
Registered: 2012-05-17
Posts: 3,877

Re: [SOLVED]Failed to take device '/dev/dri/card0':Operation not permitted

And why should the systemd permission system make delayed loading of subsystems and drivers impossible? In my opinion that is a bug in systemd.


| alias CUTF='LANG=en_XX.UTF-8@POSIX ' |

Online

#9 2019-11-14 23:11:05

Deniz
Member
Registered: 2019-11-11
Posts: 3

Re: [SOLVED]Failed to take device '/dev/dri/card0':Operation not permitted

Thanks for all the help!

Update: After doing a couple reboots and tests, the command did work with my service file restored.

echo drm > /etc/modules-load.d/test.conf

Since this was unexpected, if you would like any more information I will be happy to help.

Offline

#10 2019-11-14 23:15:36

loqs
Member
Registered: 2014-03-06
Posts: 11,825

Re: [SOLVED]Failed to take device '/dev/dri/card0':Operation not permitted

Please report this on the upstream bug report https://github.com/systemd/systemd/issues/13943
You should probably also note if the module was added to the initrd or not.
Edit:
Reported your findings to upstream.

Last edited by loqs (2019-11-15 15:37:25)

Offline

Board footer

Powered by FluxBB