You are not logged in.

#1 2020-02-07 22:39:27

Cryptix_00
Member
Registered: 2008-07-16
Posts: 120

Screen flicker after resume from suspend [amdgpu]

This only started happening within the last few days, I update almost every day. Now, upon resume from suspend, the screen flickers every 200ms or so.


This is my dmesg:

[    1.001073] tty tty34: hash matches
[    1.001213] rtc_cmos 00:02: setting system clock to 2020-02-07T01:20:38 UTC (1581038438)
[    1.197644] nvme nvme0: missing or invalid SUBNQN field.
[    1.197671] nvme nvme0: Shutdown timeout set to 8 seconds
[    1.217035] nvme nvme0: 16/0/0 default/read/poll queues
[    1.224116]  nvme0n1: p1 p2
[    1.226100] Freeing unused decrypted memory: 2040K
[    1.226361] Freeing unused kernel image (initmem) memory: 1664K
[    1.260423] Write protecting the kernel read-only data: 20480k
[    1.261221] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    1.261543] Freeing unused kernel image (rodata/data gap) memory: 1872K
[    1.270675] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.270677] Run /init as init process
[    1.279962] fbcon: Taking over console
[    1.280045] Console: switching to colour frame buffer device 430x90
[    1.383622] SCSI subsystem initialized
[    1.384879] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.384885] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[    1.389811] libata version 3.00 loaded.
[    1.392823] ahci 0000:03:00.1: version 3.0
[    1.392975] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
[    1.393028] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[    1.393030] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    1.393601] scsi host0: ahci
[    1.393702] scsi host1: ahci
[    1.393781] scsi host2: ahci
[    1.393860] scsi host3: ahci
[    1.393933] scsi host4: ahci
[    1.394010] scsi host5: ahci
[    1.394104] scsi host6: ahci
[    1.394196] scsi host7: ahci
[    1.394230] ata1: SATA max UDMA/133 abar m131072@0xfd780000 port 0xfd780100 irq 62
[    1.394231] ata2: SATA max UDMA/133 abar m131072@0xfd780000 port 0xfd780180 irq 62
[    1.394233] ata3: SATA max UDMA/133 abar m131072@0xfd780000 port 0xfd780200 irq 62
[    1.394234] ata4: SATA max UDMA/133 abar m131072@0xfd780000 port 0xfd780280 irq 62
[    1.394235] ata5: SATA max UDMA/133 abar m131072@0xfd780000 port 0xfd780300 irq 62
[    1.394237] ata6: SATA max UDMA/133 abar m131072@0xfd780000 port 0xfd780380 irq 62
[    1.394238] ata7: SATA max UDMA/133 abar m131072@0xfd780000 port 0xfd780400 irq 62
[    1.394239] ata8: SATA max UDMA/133 abar m131072@0xfd780000 port 0xfd780480 irq 62
[    1.394450] ahci 0000:12:00.2: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.394452] ahci 0000:12:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs 
[    1.394663] scsi host8: ahci
[    1.394750] scsi host9: ahci
[    1.394785] ata9: SATA max UDMA/133 abar m4096@0xfdd08000 port 0xfdd08100 irq 64
[    1.394786] ata10: SATA max UDMA/133 abar m4096@0xfdd08000 port 0xfdd08180 irq 65
[    1.440239] xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000008000410
[    1.440409] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[    1.440411] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.440412] usb usb1: Product: xHCI Host Controller
[    1.440413] usb usb1: Manufacturer: Linux 5.5.2-arch1-1 xhci-hcd
[    1.440413] usb usb1: SerialNumber: 0000:03:00.0
[    1.440711] hub 1-0:1.0: USB hub found
[    1.440727] hub 1-0:1.0: 14 ports detected
[    1.441084] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.441086] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    1.441089] xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.441116] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.441133] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05
[    1.441134] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.441135] usb usb2: Product: xHCI Host Controller
[    1.441136] usb usb2: Manufacturer: Linux 5.5.2-arch1-1 xhci-hcd
[    1.441137] usb usb2: SerialNumber: 0000:03:00.0
[    1.441206] hub 2-0:1.0: USB hub found
[    1.441216] hub 2-0:1.0: 8 ports detected
[    1.441290] usb: port power management may be unreliable
[    1.441519] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.441522] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[    1.500432] xhci_hcd 0000:05:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x0000000000000010
[    1.501038] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[    1.501039] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.501039] usb usb3: Product: xHCI Host Controller
[    1.501040] usb usb3: Manufacturer: Linux 5.5.2-arch1-1 xhci-hcd
[    1.501041] usb usb3: SerialNumber: 0000:05:00.0
[    1.501120] hub 3-0:1.0: USB hub found
[    1.501128] hub 3-0:1.0: 2 ports detected
[    1.501229] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.501231] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[    1.501233] xhci_hcd 0000:05:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.501255] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.501272] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05
[    1.501273] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.501274] usb usb4: Product: xHCI Host Controller
[    1.501274] usb usb4: Manufacturer: Linux 5.5.2-arch1-1 xhci-hcd
[    1.501275] usb usb4: SerialNumber: 0000:05:00.0
[    1.501332] hub 4-0:1.0: USB hub found
[    1.501345] hub 4-0:1.0: 2 ports detected
[    1.501479] xhci_hcd 0000:11:00.3: xHCI Host Controller
[    1.501481] xhci_hcd 0000:11:00.3: new USB bus registered, assigned bus number 5
[    1.501576] xhci_hcd 0000:11:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000410
[    1.501673] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[    1.501674] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.501675] usb usb5: Product: xHCI Host Controller
[    1.501676] usb usb5: Manufacturer: Linux 5.5.2-arch1-1 xhci-hcd
[    1.501677] usb usb5: SerialNumber: 0000:11:00.3
[    1.501738] hub 5-0:1.0: USB hub found
[    1.501744] hub 5-0:1.0: 4 ports detected
[    1.501897] xhci_hcd 0000:11:00.3: xHCI Host Controller
[    1.501899] xhci_hcd 0000:11:00.3: new USB bus registered, assigned bus number 6
[    1.501900] xhci_hcd 0000:11:00.3: Host supports USB 3.0 SuperSpeed
[    1.501919] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.501935] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05
[    1.501936] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.501937] usb usb6: Product: xHCI Host Controller
[    1.501938] usb usb6: Manufacturer: Linux 5.5.2-arch1-1 xhci-hcd
[    1.501939] usb usb6: SerialNumber: 0000:11:00.3
[    1.502008] hub 6-0:1.0: USB hub found
[    1.502014] hub 6-0:1.0: 4 ports detected
[    1.708181] ata10: SATA link down (SStatus 0 SControl 300)
[    1.708203] ata9: SATA link down (SStatus 0 SControl 300)
[    1.770389] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[    1.830379] usb 5-2: new full-speed USB device number 2 using xhci_hcd
[    1.867050] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.867480] ata1.00: ATA-8: OCZ-SABER1000, 1.01, max UDMA/133
[    1.867481] ata1.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.869112] ata1.00: configured for UDMA/133
[    1.869541] scsi 0:0:0:0: Direct-Access     ATA      OCZ-SABER1000    1.01 PQ: 0 ANSI: 5
[    1.872262] sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[    1.872264] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.872275] sd 0:0:0:0: [sda] Write Protect is off
[    1.872277] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.872293] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.897047] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    1.914544] usb 3-1: New USB device found, idVendor=1058, idProduct=1021, bcdDevice=20.21
[    1.914546] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.914547] usb 3-1: Product: Ext HDD 1021
[    1.914548] usb 3-1: Manufacturer: Western Digital
[    1.914549] usb 3-1: SerialNumber: 5743415A414C373938333134
[    1.915172]  sda: sda1
[    1.915521] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.919561] usb-storage 3-1:1.0: USB Mass Storage device detected
[    1.919659] scsi host10: usb-storage 3-1:1.0
[    1.919715] usbcore: registered new interface driver usb-storage
[    1.920860] usbcore: registered new interface driver uas
[    1.967051] tsc: Refined TSC clocksource calibration: 2994.374 MHz
[    1.967060] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b29828a32c, max_idle_ns: 440795270613 ns
[    1.967292] clocksource: Switched to clocksource tsc
[    1.991037] usb 5-2: New USB device found, idVendor=1b1c, idProduct=1b05, bcdDevice= 2.26
[    1.991039] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.991040] usb 5-2: Product: Corsair M65 Gaming Mouse
[    1.991041] usb 5-2: Manufacturer: Corsair
[    2.007114] hid: raw HID events driver (C) Jiri Kosina
[    2.023742] usbcore: registered new interface driver usbhid
[    2.023744] usbhid: USB HID core driver
[    2.025358] input: Corsair Corsair M65 Gaming Mouse as /devices/pci0000:00/0000:00:07.1/0000:11:00.3/usb5/5-2/5-2:1.0/0003:1B1C:1B05.0001/input/input2
[    2.025391] hid-generic 0003:1B1C:1B05.0001: input,hidraw0: USB HID v1.11 Mouse [Corsair Corsair M65 Gaming Mouse] on usb-0000:11:00.3-2/input0
[    2.025491] input: Corsair Corsair M65 Gaming Mouse as /devices/pci0000:00/0000:00:07.1/0000:11:00.3/usb5/5-2/5-2:1.1/0003:1B1C:1B05.0002/input/input3
[    2.080624] hid-generic 0003:1B1C:1B05.0002: input,hidraw1: USB HID v1.11 Keyboard [Corsair Corsair M65 Gaming Mouse] on usb-0000:11:00.3-2/input1
[    2.080985] input: Corsair Corsair M65 Gaming Mouse as /devices/pci0000:00/0000:00:07.1/0000:11:00.3/usb5/5-2/5-2:1.2/0003:1B1C:1B05.0003/input/input4
[    2.136959] hid-generic 0003:1B1C:1B05.0003: input,hidraw2: USB HID v1.11 Device [Corsair Corsair M65 Gaming Mouse] on usb-0000:11:00.3-2/input2
[    2.160150] usb 1-4: New USB device found, idVendor=045e, idProduct=02ea, bcdDevice= 3.01
[    2.160154] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.160155] usb 1-4: Product: Controller
[    2.160156] usb 1-4: Manufacturer: Microsoft
[    2.160157] usb 1-4: SerialNumber: 3032363030313839323937393232
[    2.290370] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    2.337038] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.337607] ata2.00: ATA-10: WDC WD40EZRZ-00GXCB0, 80.00A80, max UDMA/133
[    2.337608] ata2.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    2.338169] ata2.00: configured for UDMA/133
[    2.338590] scsi 1:0:0:0: Direct-Access     ATA      WDC WD40EZRZ-00G 0A80 PQ: 0 ANSI: 5
[    2.338894] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[    2.338896] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    2.338909] sd 1:0:0:0: [sdb] Write Protect is off
[    2.338911] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.338931] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.412565]  sdb: sdb1
[    2.413157] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.557005] usb 1-7: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
[    2.557007] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.557009] usb 1-7: Product: Corne Keyboard (crkbd)
[    2.557010] usb 1-7: Manufacturer: foostan
[    2.557010] usb 1-7: SerialNumber: 0
[    2.581649] input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.0/0003:FEED:3060.0004/input/input5
[    2.637163] hid-generic 0003:FEED:3060.0004: input,hidraw3: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:03:00.0-7/input0
[    2.669152] input: foostan Corne Keyboard (crkbd) Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.1/0003:FEED:3060.0005/input/input6
[    2.669173] input: foostan Corne Keyboard (crkbd) System Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.1/0003:FEED:3060.0005/input/input7
[    2.723769] input: foostan Corne Keyboard (crkbd) Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.1/0003:FEED:3060.0005/input/input8
[    2.723794] input: foostan Corne Keyboard (crkbd) Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.1/0003:FEED:3060.0005/input/input9
[    2.724003] hid-generic 0003:FEED:3060.0005: input,hidraw4: USB HID v1.11 Mouse [foostan Corne Keyboard (crkbd)] on usb-0000:03:00.0-7/input1
[    2.810364] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.810946] ata3.00: ATA-8: ST3000DM001-9YN166, CC4B, max UDMA/133
[    2.810947] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    2.811466] ata3.00: configured for UDMA/133
[    2.811788] scsi 2:0:0:0: Direct-Access     ATA      ST3000DM001-9YN1 CC4B PQ: 0 ANSI: 5
[    2.812059] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[    2.812061] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[    2.812076] sd 2:0:0:0: [sdc] Write Protect is off
[    2.812078] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.812099] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.846707] usb 1-12: new full-speed USB device number 4 using xhci_hcd
[    2.866992] random: fast init done
[    2.895264]  sdc: sdc1
[    2.895856] sd 2:0:0:0: [sdc] Attached SCSI disk
[    2.929634] scsi 10:0:0:0: Direct-Access     WD       Ext HDD 1021     2021 PQ: 0 ANSI: 4
[    2.930298] sd 10:0:0:0: [sdd] 3907024896 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    2.932177] sd 10:0:0:0: [sdd] Write Protect is off
[    2.932179] sd 10:0:0:0: [sdd] Mode Sense: 17 00 10 08
[    2.933944] sd 10:0:0:0: [sdd] No Caching mode page found
[    2.933947] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[    2.974643]  sdd: sdd1
[    2.978694] sd 10:0:0:0: [sdd] Attached SCSI disk
[    3.124545] ata4: SATA link down (SStatus 0 SControl 300)
[    3.237678] usb 1-12: New USB device found, idVendor=1b1c, idProduct=0c0b, bcdDevice= 0.07
[    3.237680] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.237682] usb 1-12: Product: Lighting Node PRO
[    3.237683] usb 1-12: Manufacturer: Corsair
[    3.237684] usb 1-12: SerialNumber: 2940010BC8902BAFC0BFDC5AC51B00F5
[    3.254248] hid-generic 0003:1B1C:0C0B.0006: hiddev0,hidraw5: USB HID v1.11 Device [Corsair Lighting Node PRO] on usb-0000:03:00.0-12/input0
[    3.377037] usb 1-13: new full-speed USB device number 5 using xhci_hcd
[    3.437583] ata5: SATA link down (SStatus 0 SControl 300)
[    3.703965] usb 1-13: New USB device found, idVendor=0a5c, idProduct=21e8, bcdDevice= 1.12
[    3.703967] usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.703969] usb 1-13: Product: BCM20702A0
[    3.703970] usb 1-13: Manufacturer: Broadcom Corp
[    3.703970] usb 1-13: SerialNumber: 5CF3708B4858
[    3.907033] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.907600] ata6.00: ATA-9: WDC WD40EZRX-22SPEB0, 80.00A80, max UDMA/133
[    3.907602] ata6.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.908139] ata6.00: configured for UDMA/133
[    3.908552] scsi 5:0:0:0: Direct-Access     ATA      WDC WD40EZRX-22S 0A80 PQ: 0 ANSI: 5
[    3.908827] sd 5:0:0:0: [sde] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[    3.908829] sd 5:0:0:0: [sde] 4096-byte physical blocks
[    3.908840] sd 5:0:0:0: [sde] Write Protect is off
[    3.908842] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[    3.908859] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.007334]  sde: sde1
[    4.007965] sd 5:0:0:0: [sde] Attached SCSI disk
[    4.380366] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.381282] ata7.00: ATA-9: ST3000DM008-2DM166, CC26, max UDMA/133
[    4.381284] ata7.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    4.382252] ata7.00: configured for UDMA/133
[    4.382573] scsi 6:0:0:0: Direct-Access     ATA      ST3000DM008-2DM1 CC26 PQ: 0 ANSI: 5
[    4.382864] sd 6:0:0:0: [sdf] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[    4.382866] sd 6:0:0:0: [sdf] 4096-byte physical blocks
[    4.382879] sd 6:0:0:0: [sdf] Write Protect is off
[    4.382881] sd 6:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[    4.382901] sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.462532]  sdf: sdf1
[    4.463089] sd 6:0:0:0: [sdf] Attached SCSI disk
[    4.857031] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.858630] ata8.00: ATA-9: ADATA SP550, O1230C, max UDMA/133
[    4.858632] ata8.00: 937703088 sectors, multi 2: LBA48 NCQ (depth 32), AA
[    4.859200] ata8.00: configured for UDMA/133
[    4.859482] scsi 7:0:0:0: Direct-Access     ATA      ADATA SP550      0C   PQ: 0 ANSI: 5
[    4.859880] sd 7:0:0:0: [sdg] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[    4.859895] sd 7:0:0:0: [sdg] Write Protect is off
[    4.859897] sd 7:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[    4.859922] sd 7:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.887768]  sdg: sdg1 sdg2 sdg3
[    4.888155] sd 7:0:0:0: [sdg] Attached SCSI disk
[    4.978267] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
[    5.050041] systemd[1]: systemd 244.2-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    5.067142] systemd[1]: Detected architecture x86-64.
[    5.089636] systemd[1]: Set hostname to <leshowbox>.
[    5.090932] systemd[1]: Couldn't move remaining userspace processes, ignoring: Input/output error
[    5.107295] random: crng init done
[    5.112841] systemd-fstab-generator[412]: Failed to create unit file /run/systemd/generator/srv-nfs-tv.mount, as it already exists. Duplicate entry in /etc/fstab?
[    5.116376] systemd[407]: /usr/lib/systemd/system-generators/systemd-fstab-generator failed with exit status 1.
[    5.169611] systemd[1]: Created slice system-getty.slice.
[    5.169870] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    5.170110] systemd[1]: Created slice User and Session Slice.
[    5.170148] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.170174] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.170483] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.170512] systemd[1]: Reached target Local Encrypted Volumes.
[    5.170527] systemd[1]: Reached target Host and Network Name Lookups.
[    5.170533] systemd[1]: Reached target Paths.
[    5.170542] systemd[1]: Reached target Remote File Systems.
[    5.170550] systemd[1]: Reached target Slices.
[    5.170592] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.171204] systemd[1]: Listening on LVM2 metadata daemon socket.
[    5.171359] systemd[1]: Listening on LVM2 poll daemon socket.
[    5.174152] systemd[1]: Listening on RPCbind Server Activation Socket.
[    5.174166] systemd[1]: Reached target RPC Port Mapper.
[    5.175394] systemd[1]: Listening on Process Core Dump Socket.
[    5.175426] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    5.175501] systemd[1]: Listening on Journal Audit Socket.
[    5.175553] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.175606] systemd[1]: Listening on Journal Socket.
[    5.176088] systemd[1]: Listening on udev Control Socket.
[    5.176126] systemd[1]: Listening on udev Kernel Socket.
[    5.176719] systemd[1]: Mounting Huge Pages File System...
[    5.177435] systemd[1]: Mounting POSIX Message Queue File System...
[    5.178223] systemd[1]: Mounting NFSD configuration filesystem...
[    5.178895] systemd[1]: Mounting Kernel Debug File System...
[    5.178947] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[    5.179701] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    5.180528] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    5.181842] systemd[1]: Starting Set Up Additional Binary Formats...
[    5.181872] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    5.183156] systemd[1]: Starting Journal Service...
[    5.184380] systemd[1]: Starting Load Kernel Modules...
[    5.185059] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.185674] systemd[1]: Starting udev Coldplug all Devices...
[    5.186788] systemd[1]: Mounted Huge Pages File System.
[    5.186898] systemd[1]: Mounted POSIX Message Queue File System.
[    5.186997] systemd[1]: Mounted Kernel Debug File System.
[    5.187550] systemd[1]: Started Create list of static device nodes for the current kernel.
[    5.187685] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 430 (systemd-binfmt)
[    5.188808] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[    5.190765] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[    5.190808] EXT4-fs (nvme0n1p1): re-mounted. Opts: data=ordered
[    5.191783] systemd[1]: Started Remount Root and Kernel File Systems.
[    5.192373] vhba: loading out-of-tree module taints kernel.
[    5.192394] vhba: module verification failed: signature and/or required key missing - tainting kernel
[    5.192469] systemd[1]: Started Set Up Additional Binary Formats.
[    5.192846] scsi host11: vhba
[    5.193566] systemd[1]: Started LVM2 metadata daemon.
[    5.193647] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    5.195124] systemd[1]: Starting Rebuild Hardware Database...
[    5.195821] systemd[1]: Starting Load/Save Random Seed...
[    5.196494] systemd[1]: Starting Create System Users...
[    5.196823] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.196854] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    5.196883] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    5.196917] sd 10:0:0:0: Attached scsi generic sg3 type 0
[    5.196988] sd 5:0:0:0: Attached scsi generic sg4 type 0
[    5.197014] sd 6:0:0:0: Attached scsi generic sg5 type 0
[    5.197039] sd 7:0:0:0: Attached scsi generic sg6 type 0
[    5.208078] RPC: Registered named UNIX socket transport module.
[    5.208079] RPC: Registered udp transport module.
[    5.208080] RPC: Registered tcp transport module.
[    5.208080] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.210126] systemd[1]: Started Load/Save Random Seed.
[    5.217881] systemd[1]: Started Create System Users.
[    5.218681] systemd[1]: Starting Create Static Device Nodes in /dev...
[    5.228782] vboxdrv: Found 16 processor cores
[    5.229447] systemd[1]: Started Create Static Device Nodes in /dev.
[    5.247855] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    5.248941] systemd[1]: Mounted NFSD configuration filesystem.
[    5.250248] vboxdrv: TSC mode is Invariant, tentative frequency 2994370777 Hz
[    5.250249] vboxdrv: Successfully loaded version 6.1.2 (interface 0x002d0001)
[    5.251374] VBoxNetAdp: Successfully started.
[    5.252194] systemd[1]: Started udev Coldplug all Devices.
[    5.253550] VBoxNetFlt: Successfully started.
[    5.254523] systemd[1]: Started Load Kernel Modules.
[    5.254660] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[    5.255363] systemd[1]: Mounting Kernel Configuration File System...
[    5.256006] systemd[1]: Starting Apply Kernel Variables...
[    5.257381] systemd[1]: Mounted Kernel Configuration File System.
[    5.261253] systemd[1]: Started Apply Kernel Variables.
[    5.435869] systemd[1]: Started Journal Service.
[    5.435945] audit: type=1130 audit(1581038442.929:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.442153] systemd-journald[431]: Received client request to flush runtime journal.
[    5.515606] audit: type=1130 audit(1581038443.009:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hwdb-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.583734] audit: type=1130 audit(1581038443.079:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.754444] audit: type=1130 audit(1581038443.249:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.775085] acpi_cpufreq: overriding BIOS provided _PSD data
[    5.785036] wmi_bus wmi_bus-PNP0C14:01: WQAA data block query control method not found
[    5.835282] dca service started, version 1.12.1
[    5.840770] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    5.840773] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[    5.843682] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    5.845994] input: PC Speaker as /devices/platform/pcspkr/input/input10
[    5.847055] ccp 0000:11:00.2: ccp enabled
[    5.847696] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[    5.848143] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[    5.849257] Linux agpgart interface v0.103
[    5.852235] alx 0000:07:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [1c:1b:0d:9e:37:01]
[    5.866792] Adding 5122228k swap on /dev/nvme0n1p2.  Priority:-2 extents:1 across:5122228k SSFS
[    5.911882] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[    5.911893] igb: Copyright (c) 2007-2014 Intel Corporation.
[    5.911952] input: Microsoft X-Box One S pad as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-4/1-4:1.0/input/input11
[    5.912089] usbcore: registered new interface driver xpad
[    5.912592] cryptd: max_cpu_qlen set to 1000
[    5.920075] mousedev: PS/2 mouse device common for all mice
[    5.932624] AVX2 version of gcm_enc/dec engaged.
[    5.932626] AES CTR mode by8 optimization enabled
[    5.940511] pps pps0: new PPS source ptp0
[    5.940549] igb 0000:06:00.0: added PHC on eth1
[    5.940551] igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
[    5.940553] igb 0000:06:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 1c:1b:0d:9e:36:ff
[    5.940555] igb 0000:06:00.0: eth1: PBA No: FFFFFF-0FF
[    5.940557] igb 0000:06:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
[    6.015021] Bluetooth: Core ver 2.22
[    6.015038] NET: Registered protocol family 31
[    6.015038] Bluetooth: HCI device and connection manager initialized
[    6.015042] Bluetooth: HCI socket layer initialized
[    6.015045] Bluetooth: L2CAP socket layer initialized
[    6.015049] Bluetooth: SCO socket layer initialized
[    6.018697] snd_hda_intel 0000:0b:00.1: Force to non-snoop mode
[    6.025143] usbcore: registered new interface driver btusb
[    6.040941] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input12
[    6.041000] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input13
[    6.041061] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input14
[    6.041132] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input15
[    6.041180] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input16
[    6.041223] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input17
[    6.088508] audit: type=1130 audit(1581038443.582:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.117587] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    6.117590] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.117592] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.117595] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    6.117596] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[    6.117598] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    6.117600] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    6.117601] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    6.125560] audit: type=1130 audit(1581038443.619:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-4de25650\x2dfa80\x2d4b32\x2d9dc2\x2deae835af0584 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.129312] snd_hda_codec_realtek hdaudioC1D1: autoconfig for ALC1220: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:hp
[    6.129315] snd_hda_codec_realtek hdaudioC1D1:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.129317] snd_hda_codec_realtek hdaudioC1D1:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.129318] snd_hda_codec_realtek hdaudioC1D1:    mono: mono_out=0x0
[    6.129320] snd_hda_codec_realtek hdaudioC1D1:    inputs:
[    6.129321] snd_hda_codec_realtek hdaudioC1D1:      Front Mic=0x1a
[    6.135515] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:12:00.3/sound/card1/input18
[    6.135571] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:12:00.3/sound/card1/input19
[    6.135618] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:12:00.3/sound/card1/input20
[    6.135667] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:12:00.3/sound/card1/input21
[    6.135714] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:12:00.3/sound/card1/input22
[    6.135764] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:12:00.3/sound/card1/input23
[    6.135819] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:12:00.3/sound/card1/input24
[    6.137543] Bluetooth: hci0: BCM: chip id 63
[    6.140542] Bluetooth: hci0: BCM: features 0x07
[    6.141250] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
[    6.158553] Bluetooth: hci0: leshowbox
[    6.160545] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[    6.161391] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e8.hcd failed with error -2
[    6.161393] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e8.hcd not found
[    6.178709] kvm: disabled by bios
[    6.189340] alx 0000:07:00.0 enp7s0: renamed from eth0
[    6.210911] igb 0000:06:00.0 enp6s0: renamed from eth1
[    6.236406] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    6.237527] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[    6.255713] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
[    6.260135] audit: type=1130 audit(1581038443.756:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.260773] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
[    6.323802] audit: type=1130 audit(1581038443.819:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.331523] audit: type=1127 audit(1581038443.826:10): pid=721 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[    6.334462] MCE: In-kernel MCE decoding enabled.
[    6.334953] audit: type=1130 audit(1581038443.829:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.335102] kvm: disabled by bios
[    6.336774] audit: type=1130 audit(1581038443.832:12): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=nfsdcld comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.338002] EDAC amd64: F17h detected (node 0).
[    6.338051] EDAC amd64: Node 0: DRAM ECC disabled.
[    6.338475] audit: type=1130 audit(1581038443.832:13): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=nfs-idmapd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.395148] audit: type=1130 audit(1581038443.889:14): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.458562] audit: type=1130 audit(1581038443.952:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.487269] [drm] amdgpu kernel modesetting enabled.
[    6.487683] Parsing CRAT table with 0 nodes
[    6.487689] Virtual CRAT table created for CPU
[    6.487690] Parsing CRAT table with 1 nodes
[    6.487693] Creating topology SYSFS entries
[    6.487719] Topology: Add CPU node
[    6.487721] Finished initializing topology
[    6.487930] checking generic (e0000000 1300000) vs hw (e0000000 10000000)
[    6.487933] fb0: switching to amdgpudrmfb from VESA VGA
[    6.488061] Console: switching to colour dummy device 80x25
[    6.488235] amdgpu 0000:0b:00.0: vgaarb: deactivate vga console
[    6.488631] [drm] initializing kernel modesetting (NAVI10 0x1002:0x731F 0x1043:0x0577 0xC1).
[    6.488660] [drm] register mmio base: 0xFDB00000
[    6.488662] [drm] register mmio size: 524288
[    6.489365] kvm: disabled by bios
[    6.497109] EDAC amd64: F17h detected (node 0).
[    6.497151] EDAC amd64: Node 0: DRAM ECC disabled.
[    6.510100] [drm] set register base offset for ATHUB
[    6.510101] [drm] set register base offset for CLKA
[    6.510102] [drm] set register base offset for CLKA
[    6.510102] [drm] set register base offset for CLKA
[    6.510102] [drm] set register base offset for CLKA
[    6.510102] [drm] set register base offset for CLKA
[    6.510103] [drm] set register base offset for DF
[    6.510104] [drm] set register base offset for DMU
[    6.510104] [drm] set register base offset for GC
[    6.510104] [drm] set register base offset for HDP
[    6.510105] [drm] set register base offset for MMHUB
[    6.510105] [drm] set register base offset for MP0
[    6.510105] [drm] set register base offset for MP1
[    6.510106] [drm] set register base offset for NBIF
[    6.510106] [drm] set register base offset for NBIF
[    6.510106] [drm] set register base offset for OSSSYS
[    6.510107] [drm] set register base offset for SDMA0
[    6.510107] [drm] set register base offset for SDMA1
[    6.510107] [drm] set register base offset for SMUIO
[    6.510108] [drm] set register base offset for THM
[    6.510109] [drm] set register base offset for UVD
[    6.510110] [drm] add ip block number 0 <nv_common>
[    6.510111] [drm] add ip block number 1 <gmc_v10_0>
[    6.510112] [drm] add ip block number 2 <navi10_ih>
[    6.510112] [drm] add ip block number 3 <psp>
[    6.510113] [drm] add ip block number 4 <smu>
[    6.510114] [drm] add ip block number 5 <dm>
[    6.510114] [drm] add ip block number 6 <gfx_v10_0>
[    6.510115] [drm] add ip block number 7 <sdma_v5_0>
[    6.510116] [drm] add ip block number 8 <vcn_v2_0>
[    6.510448] amdgpu 0000:0b:00.0: No more image in the PCI ROM
[    6.510468] ATOM BIOS: 115-D199PI0-100
[    6.510476] [drm] VCN decode is enabled in VM mode
[    6.510476] [drm] VCN encode is enabled in VM mode
[    6.510476] [drm] VCN jpeg decode is enabled in VM mode
[    6.510503] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[    6.510508] amdgpu 0000:0b:00.0: VRAM: 8176M 0x0000008000000000 - 0x00000081FEFFFFFF (8176M used)
[    6.510509] amdgpu 0000:0b:00.0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
[    6.510516] [drm] Detected VRAM RAM=8176M, BAR=256M
[    6.510516] [drm] RAM width 256bits GDDR6
[    6.510627] [TTM] Zone  kernel: Available graphics memory: 8205356 KiB
[    6.510628] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[    6.510628] [TTM] Initializing pool allocator
[    6.510633] [TTM] Initializing DMA pool allocator
[    6.510922] [drm] amdgpu: 8176M of VRAM memory ready
[    6.510926] [drm] amdgpu: 8176M of GTT memory ready.
[    6.510935] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    6.511046] [drm] PCIE GART of 512M enabled (table at 0x00000080012FC000).
[    6.518373] [drm] use_doorbell being set to: [true]
[    6.518453] [drm] use_doorbell being set to: [true]
[    6.519016] [drm] Found VCN firmware Version ENC: 1.7 DEC: 4 VEP: 0 Revision: 13
[    6.519022] [drm] PSP loading VCN firmware
[    6.651767] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.651769] Bluetooth: BNEP filters: protocol multicast
[    6.651774] Bluetooth: BNEP socket layer initialized
[    6.651779] kvm: disabled by bios
[    6.651929] EDAC amd64: F17h detected (node 0).
[    6.651982] EDAC amd64: Node 0: DRAM ECC disabled.
[    6.656773] NET: Registered protocol family 38
[    6.800527] kvm: disabled by bios
[    6.816019] NFSD: Using nfsdcld client tracking operations.
[    6.816024] NFSD: no clients to reclaim, skipping NFSv4 grace period (net f0000098)
[    6.859627] EDAC amd64: F17h detected (node 0).
[    6.860280] kvm: disabled by bios
[    6.860351] EDAC amd64: Node 0: DRAM ECC disabled.
[    6.879457] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    6.881645] Bridge firewalling registered
[    6.902418] irq 7: nobody cared (try booting with the "irqpoll" option)
[    6.902421] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G           OE     5.5.2-arch1-1 #1
[    6.902422] Hardware name: Gigabyte Technology Co., Ltd. AX370-Gaming 5/AX370-Gaming 5, BIOS F8 09/01/2017
[    6.902423] Call Trace:
[    6.902425]  <IRQ>
[    6.902430]  dump_stack+0x66/0x90
[    6.902434]  __report_bad_irq+0x35/0xaa
[    6.902435]  note_interrupt.cold+0xb/0x69
[    6.902437]  handle_irq_event_percpu+0x6f/0x80
[    6.902439]  handle_irq_event+0x37/0x54
[    6.902440]  handle_fasteoi_irq+0xb5/0x160
[    6.902442]  do_IRQ+0x84/0x140
[    6.902444]  common_interrupt+0xf/0xf
[    6.902445]  </IRQ>
[    6.902446] RIP: 0010:native_safe_halt+0xe/0x10
[    6.902448] Code: ff ff eb bd cc cc cc cc cc cc cc cc e9 07 00 00 00 0f 00 2d 86 5d 4b 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 76 5d 4b 00 fb f4 <c3> cc 0f 1f 44 00 00 41 54 55 53 e8 42 62 7c ff e8 9d f9 b2 ff 0f
[    6.902449] RSP: 0018:ffffbb71c015fe10 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdc
[    6.902450] RAX: 0000000080004000 RBX: 0000000000000001 RCX: 0000000000000034
[    6.902451] RDX: 4ec4ec4ec4ec4ec5 RSI: ffffffff938c3aa0 RDI: ffff99b98c0e2c64
[    6.902452] RBP: ffff99b98c0e2c00 R08: 000000019b6a61b9 R09: 000000007fffffff
[    6.902452] R10: 000000000000000a R11: ffff99b98edebbe4 R12: ffff99b98c0e2c64
[    6.902453] R13: 0000000000000001 R14: 0000000000000001 R15: ffff99b98d3edac0
[    6.902456]  acpi_safe_halt+0x1b/0x30
[    6.902459]  acpi_idle_enter+0x100/0x2c0
[    6.902462]  cpuidle_enter_state+0x81/0x410
[    6.902464]  cpuidle_enter+0x29/0x40
[    6.902467]  do_idle+0x1e6/0x270
[    6.902468]  cpu_startup_entry+0x19/0x20
[    6.902471]  start_secondary+0x186/0x1d0
[    6.902473]  secondary_startup_64+0xb6/0xc0
[    6.902475] handlers:
[    6.902478] [<00000000f3a32ffc>] amd_gpio_irq_handler [pinctrl_amd]
[    6.902478] Disabling IRQ #7
[    7.035200] kvm: disabled by bios
[    7.035213] EDAC amd64: F17h detected (node 0).
[    7.035257] EDAC amd64: Node 0: DRAM ECC disabled.
[    7.180751] kvm: disabled by bios
[    7.181529] EDAC amd64: F17h detected (node 0).
[    7.181583] EDAC amd64: Node 0: DRAM ECC disabled.
[    7.186278] Initializing XFRM netlink socket
[    7.190155] [drm] reserve 0xa00000 from 0x81fe400000 for PSP TMR
[    7.327868] EDAC amd64: F17h detected (node 0).
[    7.327912] EDAC amd64: Node 0: DRAM ECC disabled.
[    7.328633] kvm: disabled by bios
[    7.350059] amdgpu: [powerplay] use vbios provided pptable
[    7.350149] amdgpu: [powerplay] smu driver if version = 0x00000033, smu fw if version = 0x00000035, smu fw version = 0x002a2f84 (42.47.132)
[    7.350149] amdgpu: [powerplay] SMU driver if version not matched
[    7.414700] amdgpu: [powerplay] SMU is initialized successfully!
[    7.414884] [drm] Display Core initialized with v3.2.56!
[    7.454514] snd_hda_intel 0000:0b:00.1: bound 0000:0b:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    7.488735] kvm: disabled by bios
[    7.488777] EDAC amd64: F17h detected (node 0).
[    7.488837] EDAC amd64: Node 0: DRAM ECC disabled.
[    7.530963] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    7.530964] [drm] Driver supports precise vblank timestamp query.
[    7.531519] [drm] kiq ring mec 2 pipe 1 q 0
[    7.531613] [drm] ring test on 10 succeeded in 37 usecs
[    7.531656] [drm] ring test on 10 succeeded in 9 usecs
[    7.531691] [drm] gfx 0 ring me 0 pipe 0 q 0
[    7.531713] [drm] ring test on 0 succeeded in 8 usecs
[    7.531714] [drm] gfx 1 ring me 0 pipe 1 q 0
[    7.531720] [drm] ring test on 1 succeeded in 1 usecs
[    7.531720] [drm] compute ring 0 mec 1 pipe 0 q 0
[    7.531731] [drm] ring test on 2 succeeded in 3 usecs
[    7.531731] [drm] compute ring 1 mec 1 pipe 1 q 0
[    7.531741] [drm] ring test on 3 succeeded in 2 usecs
[    7.531741] [drm] compute ring 2 mec 1 pipe 2 q 0
[    7.531751] [drm] ring test on 4 succeeded in 2 usecs
[    7.531752] [drm] compute ring 3 mec 1 pipe 3 q 0
[    7.531761] [drm] ring test on 5 succeeded in 2 usecs
[    7.531762] [drm] compute ring 4 mec 1 pipe 0 q 1
[    7.531771] [drm] ring test on 6 succeeded in 2 usecs
[    7.531772] [drm] compute ring 5 mec 1 pipe 1 q 1
[    7.531781] [drm] ring test on 7 succeeded in 2 usecs
[    7.531782] [drm] compute ring 6 mec 1 pipe 2 q 1
[    7.531791] [drm] ring test on 8 succeeded in 2 usecs
[    7.531792] [drm] compute ring 7 mec 1 pipe 3 q 1
[    7.531801] [drm] ring test on 9 succeeded in 2 usecs
[    7.531878] [drm] ring test on 11 succeeded in 12 usecs
[    7.531916] [drm] ring test on 12 succeeded in 16 usecs
[    7.541063] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[    7.542842] kfd kfd: Allocated 3969056 bytes on gart
[    7.543630] Virtual CRAT table created for GPU
[    7.543631] Parsing CRAT table with 1 nodes
[    7.543637] Creating topology SYSFS entries
[    7.543712] Topology: Add dGPU node [0x731f:0x1002]
[    7.543714] kfd kfd: added device 1002:731f
[    7.544963] [drm] fb mappable at 0xE14C5000
[    7.544964] [drm] vram apper at 0xE0000000
[    7.544965] [drm] size 19906560
[    7.544965] [drm] fb depth is 24
[    7.544966] [drm]    pitch is 13824
[    7.545044] fbcon: amdgpudrmfb (fb0) is primary device
[    7.596925] kvm: disabled by bios
[    7.596940] EDAC amd64: F17h detected (node 0).
[    7.596999] EDAC amd64: Node 0: DRAM ECC disabled.
[    7.742763] kvm: disabled by bios
[    7.742828] EDAC amd64: F17h detected (node 0).
[    7.742888] EDAC amd64: Node 0: DRAM ECC disabled.
[    7.902383] EDAC amd64: F17h detected (node 0).
[    7.902428] EDAC amd64: Node 0: DRAM ECC disabled.
[    7.903662] kvm: disabled by bios
[    8.045139] EDAC amd64: F17h detected (node 0).
[    8.045182] EDAC amd64: Node 0: DRAM ECC disabled.
[    8.045491] kvm: disabled by bios
[    8.195136] EDAC amd64: F17h detected (node 0).
[    8.195228] EDAC amd64: Node 0: DRAM ECC disabled.
[    8.195813] kvm: disabled by bios
[    8.369326] kvm: disabled by bios
[    8.369895] EDAC amd64: F17h detected (node 0).
[    8.369937] EDAC amd64: Node 0: DRAM ECC disabled.
[    8.487912] EDAC amd64: F17h detected (node 0).
[    8.487958] EDAC amd64: Node 0: DRAM ECC disabled.
[    8.541925] alx 0000:07:00.0 enp7s0: NIC Up: 1 Gbps Full
[    8.542161] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready
[    8.617618] Console: switching to colour frame buffer device 430x90
[    8.632125] amdgpu 0000:0b:00.0: fb0: amdgpudrmfb frame buffer device
[    8.634295] EDAC amd64: F17h detected (node 0).
[    8.634338] EDAC amd64: Node 0: DRAM ECC disabled.
[    8.660545] amdgpu 0000:0b:00.0: ring 0(gfx_0.0.0) uses VM inv eng 4 on hub 0
[    8.660549] amdgpu 0000:0b:00.0: ring 1(gfx_0.1.0) uses VM inv eng 5 on hub 0
[    8.660552] amdgpu 0000:0b:00.0: ring 2(comp_1.0.0) uses VM inv eng 6 on hub 0
[    8.660554] amdgpu 0000:0b:00.0: ring 3(comp_1.1.0) uses VM inv eng 7 on hub 0
[    8.660557] amdgpu 0000:0b:00.0: ring 4(comp_1.2.0) uses VM inv eng 8 on hub 0
[    8.660559] amdgpu 0000:0b:00.0: ring 5(comp_1.3.0) uses VM inv eng 9 on hub 0
[    8.660561] amdgpu 0000:0b:00.0: ring 6(comp_1.0.1) uses VM inv eng 10 on hub 0
[    8.660563] amdgpu 0000:0b:00.0: ring 7(comp_1.1.1) uses VM inv eng 11 on hub 0
[    8.660565] amdgpu 0000:0b:00.0: ring 8(comp_1.2.1) uses VM inv eng 12 on hub 0
[    8.660567] amdgpu 0000:0b:00.0: ring 9(comp_1.3.1) uses VM inv eng 13 on hub 0
[    8.660570] amdgpu 0000:0b:00.0: ring 10(kiq_2.1.0) uses VM inv eng 14 on hub 0
[    8.660572] amdgpu 0000:0b:00.0: ring 11(sdma0) uses VM inv eng 15 on hub 0
[    8.660574] amdgpu 0000:0b:00.0: ring 12(sdma1) uses VM inv eng 16 on hub 0
[    8.660577] amdgpu 0000:0b:00.0: ring 13(vcn_dec) uses VM inv eng 4 on hub 1
[    8.660579] amdgpu 0000:0b:00.0: ring 14(vcn_enc0) uses VM inv eng 5 on hub 1
[    8.660582] amdgpu 0000:0b:00.0: ring 15(vcn_enc1) uses VM inv eng 6 on hub 1
[    8.660584] amdgpu 0000:0b:00.0: ring 16(vcn_jpeg) uses VM inv eng 7 on hub 1
[    8.660742] [drm] Initialized amdgpu 3.36.0 20150101 for 0000:0b:00.0 on minor 0
[   10.687045] [drm] ib test on ring 0 succeeded
[   10.687094] [drm] ib test on ring 1 succeeded
[   10.687157] [drm] ib test on ring 2 succeeded
[   10.687191] [drm] ib test on ring 3 succeeded
[   10.687221] [drm] ib test on ring 4 succeeded
[   10.687251] [drm] ib test on ring 5 succeeded
[   10.687281] [drm] ib test on ring 6 succeeded
[   10.687312] [drm] ib test on ring 7 succeeded
[   10.687343] [drm] ib test on ring 8 succeeded
[   10.687373] [drm] ib test on ring 9 succeeded
[   10.687398] [drm] ib test on ring 10 succeeded
[   10.687431] [drm] ib test on ring 11 succeeded
[   10.687462] [drm] ib test on ring 12 succeeded
[   11.264141] kauditd_printk_skb: 59 callbacks suppressed
[   11.264142] audit: type=1131 audit(1581038448.759:75): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.789506] audit: type=1100 audit(1581038452.282:76): pid=784 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=? acct="leshow" exe="/usr/bin/login" hostname=leshowbox addr=? terminal=tty1 res=failed'
[   20.950108] audit: type=1100 audit(1581038458.446:77): pid=784 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_tally2,pam_shells,pam_unix,pam_permit acct="leshow" exe="/usr/bin/login" hostname=leshowbox addr=? terminal=tty1 res=success'
[   20.967376] audit: type=1101 audit(1581038458.462:78): pid=784 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="leshow" exe="/usr/bin/login" hostname=leshowbox addr=? terminal=tty1 res=success'
[   20.969085] audit: type=1103 audit(1581038458.462:79): pid=784 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_tally2,pam_shells,pam_unix,pam_permit acct="leshow" exe="/usr/bin/login" hostname=leshowbox addr=? terminal=tty1 res=success'
[   20.969091] audit: type=1006 audit(1581038458.462:80): pid=784 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[   20.986629] audit: type=1130 audit(1581038458.482:81): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   20.992621] audit: type=1101 audit(1581038458.486:82): pid=1013 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="leshow" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   20.992626] audit: type=1006 audit(1581038458.486:83): pid=1013 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   20.992859] audit: type=1105 audit(1581038458.486:84): pid=1013 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="leshow" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   21.085374] audit: type=1130 audit(1581038458.579:85): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   21.089433] audit: type=1105 audit(1581038458.582:86): pid=784 uid=0 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="leshow" exe="/usr/bin/login" hostname=leshowbox addr=? terminal=tty1 res=success'
[   29.854331] fuse: init (API version 7.31)
[   29.854359] *** VALIDATE fuse ***
[   29.854364] *** VALIDATE fuse ***
[   29.973960] kauditd_printk_skb: 1 callbacks suppressed
[   29.973963] audit: type=1130 audit(1581038467.469:88): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   29.999364] audit: type=1130 audit(1581038467.493:89): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   30.167937] audit: type=1130 audit(1581038467.663:90): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=blueman-mechanism comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   30.198994] Bluetooth: RFCOMM TTY layer initialized
[   30.198998] Bluetooth: RFCOMM socket layer initialized
[   30.199003] Bluetooth: RFCOMM ver 1.11
[   36.906322] audit: type=1131 audit(1581038474.399:91): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   61.207843] audit: type=1131 audit(1581038498.703:92): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=blueman-mechanism comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  132.909522] audit: type=1130 audit(1581038570.407:93): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  160.303727] audit: type=1130 audit(1581038597.801:94): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  941.684755] audit: type=1130 audit(1581039378.485:95): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  941.684759] audit: type=1131 audit(1581039378.485:96): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4625.171554] audit: type=1130 audit(1581043062.020:97): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4672.029676] audit: type=1131 audit(1581043108.877:98): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4684.534360] audit: type=1130 audit(1581043121.384:99): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4714.582920] audit: type=1131 audit(1581043151.431:100): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4778.029482] audit: type=1130 audit(1581043214.882:101): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4808.078054] audit: type=1131 audit(1581043244.929:102): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4842.741080] audit: type=1130 audit(1581043279.593:103): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4886.309937] audit: type=1131 audit(1581043323.161:104): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5050.539036] audit: type=1130 audit(1581043487.396:105): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5080.587482] audit: type=1131 audit(1581043517.443:106): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5106.985927] audit: type=1130 audit(1581043543.844:107): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5137.033742] audit: type=1131 audit(1581043573.887:108): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5338.440476] audit: type=1130 audit(1581043775.300:109): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5373.202000] audit: type=1131 audit(1581043810.060:110): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6627.623219] audit: type=1130 audit(1581045064.500:111): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6657.669407] audit: type=1131 audit(1581045094.544:112): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6729.390466] audit: type=1130 audit(1581045166.268:113): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6759.439105] audit: type=1131 audit(1581045196.315:114): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7449.406568] audit: type=1130 audit(1581045886.290:115): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7479.453029] audit: type=1131 audit(1581045916.337:116): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 9856.411214] audit: type=1130 audit(1581048293.325:117): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 9886.493660] audit: type=1131 audit(1581048323.409:118): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[10027.739389] usb 1-4: USB disconnect, device number 2
[12174.804169] audit: type=1101 audit(1581050611.747:119): pid=11133 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="leshow" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[12174.804302] audit: type=1110 audit(1581050611.747:120): pid=11133 uid=0 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_unix,pam_permit,pam_env acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[12174.807806] audit: type=1105 audit(1581050611.750:121): pid=11133 uid=0 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[12174.816823] audit: type=1106 audit(1581050611.760:122): pid=11133 uid=0 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[12174.816888] audit: type=1104 audit(1581050611.760:123): pid=11133 uid=0 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_unix,pam_permit,pam_env acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[12174.888512] PM: suspend entry (deep)
[12174.929253] Filesystems sync: 0.040 seconds
[12174.930061] Freezing user space processes ... (elapsed 0.002 seconds) done.
[12174.932126] OOM killer disabled.
[12174.932127] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[12174.933592] printk: Suspending console(s) (use no_console_suspend to debug)
[12174.957445] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[12174.957580] sd 1:0:0:0: [sdb] Stopping disk
[12174.959513] sd 2:0:0:0: [sdc] Synchronizing SCSI cache
[12174.959547] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[12174.959554] sd 5:0:0:0: [sde] Synchronizing SCSI cache
[12174.959555] sd 7:0:0:0: [sdg] Synchronizing SCSI cache
[12174.959628] sd 2:0:0:0: [sdc] Stopping disk
[12174.959648] sd 5:0:0:0: [sde] Stopping disk
[12174.959683] sd 6:0:0:0: [sdf] Synchronizing SCSI cache
[12174.959830] sd 6:0:0:0: [sdf] Stopping disk
[12174.960221] sd 7:0:0:0: [sdg] Stopping disk
[12174.961506] sd 0:0:0:0: [sda] Stopping disk
[12176.012435] [drm] ring test on 10 succeeded in 8 usecs
[12176.012504] [drm] ring test on 10 succeeded in 27 usecs
[12176.556735] ACPI: Preparing to enter system sleep state S3
[12176.880140] PM: Saving platform NVS memory
[12176.880185] Disabling non-boot CPUs ...
[12176.882019] smpboot: CPU 1 is now offline
[12176.884737] smpboot: CPU 2 is now offline
[12176.888073] smpboot: CPU 3 is now offline
[12176.890888] smpboot: CPU 4 is now offline
[12176.893847] smpboot: CPU 5 is now offline
[12176.896823] smpboot: CPU 6 is now offline
[12176.899996] smpboot: CPU 7 is now offline
[12176.903152] smpboot: CPU 8 is now offline
[12176.906368] smpboot: CPU 9 is now offline
[12176.909058] smpboot: CPU 10 is now offline
[12176.912117] smpboot: CPU 11 is now offline
[12176.914802] smpboot: CPU 12 is now offline
[12176.917931] smpboot: CPU 13 is now offline
[12176.920537] smpboot: CPU 14 is now offline
[12176.923105] smpboot: CPU 15 is now offline
[12176.924589] ACPI: Low-level resume complete
[12176.924637] PM: Restoring platform NVS memory
[12176.925161] Enabling non-boot CPUs ...
[12176.925203] x86: Booting SMP configuration:
[12176.925203] smpboot: Booting Node 0 Processor 1 APIC 0x1
[12176.925344] microcode: CPU1: patch_level=0x08001126
[12176.928190] CPU1 is up
[12176.931591] smpboot: Booting Node 0 Processor 2 APIC 0x2
[12176.931709] microcode: CPU2: patch_level=0x08001126
[12176.934168] CPU2 is up
[12176.934184] smpboot: Booting Node 0 Processor 3 APIC 0x3
[12176.934293] microcode: CPU3: patch_level=0x08001126
[12176.936681] CPU3 is up
[12176.936696] smpboot: Booting Node 0 Processor 4 APIC 0x4
[12176.936932] microcode: CPU4: patch_level=0x08001126
[12176.939400] CPU4 is up
[12176.939415] smpboot: Booting Node 0 Processor 5 APIC 0x5
[12176.939523] microcode: CPU5: patch_level=0x08001126
[12176.941985] CPU5 is up
[12176.942000] smpboot: Booting Node 0 Processor 6 APIC 0x6
[12176.942121] microcode: CPU6: patch_level=0x08001126
[12176.944574] CPU6 is up
[12176.944589] smpboot: Booting Node 0 Processor 7 APIC 0x7
[12176.944708] microcode: CPU7: patch_level=0x08001126
[12176.947175] CPU7 is up
[12176.947195] smpboot: Booting Node 0 Processor 8 APIC 0x8
[12176.947358] microcode: CPU8: patch_level=0x08001126
[12176.949884] CPU8 is up
[12176.949907] smpboot: Booting Node 0 Processor 9 APIC 0x9
[12176.950053] microcode: CPU9: patch_level=0x08001126
[12176.952599] CPU9 is up
[12176.952625] smpboot: Booting Node 0 Processor 10 APIC 0xa
[12176.952789] microcode: CPU10: patch_level=0x08001126
[12176.955368] CPU10 is up
[12176.955394] smpboot: Booting Node 0 Processor 11 APIC 0xb
[12176.955542] microcode: CPU11: patch_level=0x08001126
[12176.958098] CPU11 is up
[12176.958122] smpboot: Booting Node 0 Processor 12 APIC 0xc
[12176.958289] microcode: CPU12: patch_level=0x08001126
[12176.961065] CPU12 is up
[12176.961090] smpboot: Booting Node 0 Processor 13 APIC 0xd
[12176.961240] microcode: CPU13: patch_level=0x08001126
[12176.963824] CPU13 is up
[12176.963848] smpboot: Booting Node 0 Processor 14 APIC 0xe
[12176.964017] microcode: CPU14: patch_level=0x08001126
[12176.966575] CPU14 is up
[12176.966597] smpboot: Booting Node 0 Processor 15 APIC 0xf
[12176.966749] microcode: CPU15: patch_level=0x08001126
[12176.969569] CPU15 is up
[12176.971212] ACPI: Waking up from system sleep state S3
[12177.054784] usb usb3: root hub lost power or was reset
[12177.054785] usb usb1: root hub lost power or was reset
[12177.054787] usb usb4: root hub lost power or was reset
[12177.054788] usb usb2: root hub lost power or was reset
[12177.055162] [drm] PCIE GART of 512M enabled (table at 0x00000080012FC000).
[12177.055178] [drm] PSP is resuming...
[12177.055536] sd 1:0:0:0: [sdb] Starting disk
[12177.055537] sd 0:0:0:0: [sda] Starting disk
[12177.055538] sd 2:0:0:0: [sdc] Starting disk
[12177.055542] sd 5:0:0:0: [sde] Starting disk
[12177.055550] sd 6:0:0:0: [sdf] Starting disk
[12177.055551] sd 7:0:0:0: [sdg] Starting disk
[12177.220828] nvme nvme0: Shutdown timeout set to 8 seconds
[12177.230434] [drm] reserve 0xa00000 from 0x81fe400000 for PSP TMR
[12177.237694] nvme nvme0: 16/0/0 default/read/poll queues
[12177.366809] ata5: SATA link down (SStatus 0 SControl 300)
[12177.366815] ata10: SATA link down (SStatus 0 SControl 300)
[12177.367510] ata4: SATA link down (SStatus 0 SControl 300)
[12177.367982] ata9: SATA link down (SStatus 0 SControl 300)
[12177.390326] amdgpu: [powerplay] SMU is resuming...
[12177.433998] amdgpu: [powerplay] SMU is resumed successfully!
[12177.457234] usb 1-12: reset full-speed USB device number 4 using xhci_hcd
[12177.523637] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[12177.525323] ata8.00: configured for UDMA/133
[12177.527222] usb 3-1: reset high-speed USB device number 2 using xhci_hcd
[12177.933788] usb 1-13: reset full-speed USB device number 5 using xhci_hcd
[12178.998674] [drm] kiq ring mec 2 pipe 1 q 0
[12178.998765] [drm] ring test on 10 succeeded in 35 usecs
[12178.998804] [drm] ring test on 10 succeeded in 13 usecs
[12178.998835] [drm] gfx 0 ring me 0 pipe 0 q 0
[12178.998859] [drm] ring test on 0 succeeded in 9 usecs
[12178.998859] [drm] gfx 1 ring me 0 pipe 1 q 0
[12178.998864] [drm] ring test on 1 succeeded in 1 usecs
[12178.998865] [drm] compute ring 0 mec 1 pipe 0 q 0
[12178.998875] [drm] ring test on 2 succeeded in 3 usecs
[12178.998876] [drm] compute ring 1 mec 1 pipe 1 q 0
[12178.998884] [drm] ring test on 3 succeeded in 2 usecs
[12178.998885] [drm] compute ring 2 mec 1 pipe 2 q 0
[12178.998894] [drm] ring test on 4 succeeded in 2 usecs
[12178.998894] [drm] compute ring 3 mec 1 pipe 3 q 0
[12178.998903] [drm] ring test on 5 succeeded in 2 usecs
[12178.998904] [drm] compute ring 4 mec 1 pipe 0 q 1
[12178.998912] [drm] ring test on 6 succeeded in 2 usecs
[12178.998913] [drm] compute ring 5 mec 1 pipe 1 q 1
[12178.998922] [drm] ring test on 7 succeeded in 2 usecs
[12178.998922] [drm] compute ring 6 mec 1 pipe 2 q 1
[12178.998931] [drm] ring test on 8 succeeded in 2 usecs
[12178.998931] [drm] compute ring 7 mec 1 pipe 3 q 1
[12178.998940] [drm] ring test on 9 succeeded in 2 usecs
[12178.999044] [drm] ring test on 11 succeeded in 33 usecs
[12178.999082] [drm] ring test on 12 succeeded in 17 usecs
[12179.008143] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[12179.008163] amdgpu 0000:0b:00.0: ring 0(gfx_0.0.0) uses VM inv eng 4 on hub 0
[12179.008165] amdgpu 0000:0b:00.0: ring 1(gfx_0.1.0) uses VM inv eng 5 on hub 0
[12179.008166] amdgpu 0000:0b:00.0: ring 2(comp_1.0.0) uses VM inv eng 6 on hub 0
[12179.008167] amdgpu 0000:0b:00.0: ring 3(comp_1.1.0) uses VM inv eng 7 on hub 0
[12179.008168] amdgpu 0000:0b:00.0: ring 4(comp_1.2.0) uses VM inv eng 8 on hub 0
[12179.008169] amdgpu 0000:0b:00.0: ring 5(comp_1.3.0) uses VM inv eng 9 on hub 0
[12179.008170] amdgpu 0000:0b:00.0: ring 6(comp_1.0.1) uses VM inv eng 10 on hub 0
[12179.008171] amdgpu 0000:0b:00.0: ring 7(comp_1.1.1) uses VM inv eng 11 on hub 0
[12179.008172] amdgpu 0000:0b:00.0: ring 8(comp_1.2.1) uses VM inv eng 12 on hub 0
[12179.008173] amdgpu 0000:0b:00.0: ring 9(comp_1.3.1) uses VM inv eng 13 on hub 0
[12179.008174] amdgpu 0000:0b:00.0: ring 10(kiq_2.1.0) uses VM inv eng 14 on hub 0
[12179.008175] amdgpu 0000:0b:00.0: ring 11(sdma0) uses VM inv eng 15 on hub 0
[12179.008176] amdgpu 0000:0b:00.0: ring 12(sdma1) uses VM inv eng 16 on hub 0
[12179.008177] amdgpu 0000:0b:00.0: ring 13(vcn_dec) uses VM inv eng 4 on hub 1
[12179.008178] amdgpu 0000:0b:00.0: ring 14(vcn_enc0) uses VM inv eng 5 on hub 1
[12179.008179] amdgpu 0000:0b:00.0: ring 15(vcn_enc1) uses VM inv eng 6 on hub 1
[12179.008180] amdgpu 0000:0b:00.0: ring 16(vcn_jpeg) uses VM inv eng 7 on hub 1
[12179.008424] [drm] ib test on ring 0 succeeded
[12179.008451] [drm] ib test on ring 1 succeeded
[12179.008506] [drm] ib test on ring 2 succeeded
[12179.008530] [drm] ib test on ring 3 succeeded
[12179.008580] [drm] ib test on ring 4 succeeded
[12179.008681] [drm] ib test on ring 5 succeeded
[12179.008789] [drm] ib test on ring 6 succeeded
[12179.008888] [drm] ib test on ring 7 succeeded
[12179.008988] [drm] ib test on ring 8 succeeded
[12179.009088] [drm] ib test on ring 9 succeeded
[12179.009137] [drm] ib test on ring 10 succeeded
[12179.009161] [drm] ib test on ring 11 succeeded
[12179.009188] [drm] ib test on ring 12 succeeded
[12180.002074] OOM killer enabled.
[12180.002075] Restarting tasks ... 
[12180.002192] usb 1-7: USB disconnect, device number 3
[12180.003312] done.
[12180.003318] PM: suspend exit
[12180.016239] audit: type=1130 audit(1581114771.086:124): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[12180.016242] audit: type=1131 audit(1581114771.086:125): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[12180.028470] audit: type=1130 audit(1581114771.100:126): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=shadow comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[12180.032436] audit: type=1130 audit(1581114771.103:127): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[12180.047186] audit: type=1131 audit(1581114771.120:128): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=shadow comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[12180.051340] audit: type=1130 audit(1581114771.123:129): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=logrotate comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[12180.051347] audit: type=1131 audit(1581114771.123:130): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=logrotate comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[12180.081502] alx 0000:07:00.0 enp7s0: NIC Up: 1 Gbps Full
[12180.081839] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready
[12180.125023] Bluetooth: hci0: BCM: chip id 63
[12180.128020] Bluetooth: hci0: BCM: features 0x07
[12180.146015] Bluetooth: hci0: leshowbox
[12180.148021] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[12180.148061] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e8.hcd failed with error -2
[12180.148064] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e8.hcd not found
[12181.916937] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[12181.923282] ata1.00: configured for UDMA/133
[12183.620246] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[12183.636413] ata2.00: configured for UDMA/133
[12184.686885] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[12184.701226] ata7.00: configured for UDMA/133
[12185.038206] audit: type=1131 audit(1581114776.110:131): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[12186.093553] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[12186.097977] ata3.00: configured for UDMA/133
[12186.366867] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[12186.516787] ata6.00: configured for UDMA/133
[12193.910118] usb 1-7: new full-speed USB device number 6 using xhci_hcd
[12194.243775] usb 1-7: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
[12194.243777] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12194.243779] usb 1-7: Product: Corne Keyboard (crkbd)
[12194.243780] usb 1-7: Manufacturer: foostan
[12194.243781] usb 1-7: SerialNumber: 0
[12194.268120] input: foostan Corne Keyboard (crkbd) as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.0/0003:FEED:3060.0007/input/input25
[12194.323620] hid-generic 0003:FEED:3060.0007: input,hidraw3: USB HID v1.11 Keyboard [foostan Corne Keyboard (crkbd)] on usb-0000:03:00.0-7/input0
[12194.356273] input: foostan Corne Keyboard (crkbd) Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.1/0003:FEED:3060.0008/input/input26
[12194.356389] input: foostan Corne Keyboard (crkbd) System Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.1/0003:FEED:3060.0008/input/input27
[12194.410242] input: foostan Corne Keyboard (crkbd) Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.1/0003:FEED:3060.0008/input/input28
[12194.410292] input: foostan Corne Keyboard (crkbd) Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.1/0003:FEED:3060.0008/input/input29
[12194.410429] hid-generic 0003:FEED:3060.0008: input,hidraw4: USB HID v1.11 Mouse [foostan Corne Keyboard (crkbd)] on usb-0000:03:00.0-7/input1
[12204.863481] audit: type=1101 audit(1581114795.937:132): pid=15678 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="leshow" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[12204.863628] audit: type=1110 audit(1581114795.937:133): pid=15678 uid=0 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_unix,pam_permit,pam_env acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[12204.867040] audit: type=1105 audit(1581114795.940:134): pid=15678 uid=0 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[12204.879367] audit: type=1106 audit(1581114795.950:135): pid=15678 uid=0 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[12204.879439] audit: type=1104 audit(1581114795.950:136): pid=15678 uid=0 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_unix,pam_permit,pam_env acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[12223.994846] audit: type=1130 audit(1581114815.067:137): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=updatedb comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[12223.994861] audit: type=1131 audit(1581114815.067:138): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=updatedb comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[12227.021330] audit: type=1130 audit(1581114818.093:139): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=man-db comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[12227.021343] audit: type=1131 audit(1581114818.093:140): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=man-db comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Linux leshowbox 5.5.2-arch1-1 #1 SMP PREEMPT Tue, 04 Feb 2020 18:56:18 +0000 x86_64 GNU/Linux
❯ sudo aura -Q | rg amd
xf86-video-amdgpu 19.1.0-1

Any other information I can provide that would be helpful in diagnosing this problem please let me know.

Offline

#2 2020-02-08 10:10:07

seth
Member
Registered: 2012-09-03
Posts: 13,725

Re: Screen flicker after resume from suspend [amdgpu]

Does this only affect the graphical session or also the console?
In case of the former: does restarting the display server (X11/wayland) help?

Can you reproduce it when passing

amdgpu.dpm=0 amdgpu.aspm=0 amdgpu.runpm=0 amdgpu.bapm=0 amdgpu.dc=0 amdgpu.audio=0

to the kernel?
If not, try to isolate the critical setting (The *pm values are more likely the cause, so try to remove the dc and audio parameters first and check whether the problem is still gone)

Offline

#3 2020-02-08 19:26:35

Cryptix_00
Member
Registered: 2008-07-16
Posts: 120

Re: Screen flicker after resume from suspend [amdgpu]

It affects X11 only, if I exit i3 and drop to tty1, then start it up again, the flickering stops.

If I set

amdgpu.dpm=0

then X11 will hang on startup, I had to actually hard shutdown every time I tried.

amdgpu.dc=0

stops tty1 from loading for some reason.

All the other settings appear to have no effect. At least I can get around the issue for now by killing X.

Offline

#4 2020-02-08 20:36:15

seth
Member
Registered: 2012-09-03
Posts: 13,725

Re: Screen flicker after resume from suspend [amdgpu]

Do you also run a compositor (picom/compton, xcompmgr, …)?
Otherwise: do you also have the problem when you purge xf86-video-amdgpu (and implicitly use the modesetting driver)?

Offline

#5 2020-02-08 20:36:41

LuxFerre
Member
Registered: 2010-03-01
Posts: 9

Re: Screen flicker after resume from suspend [amdgpu]

Same problem here with KDE and AMD Radeon 5700.

If I change the resolution and then change back to original the problem disappears (until the next resume from suspend). Started after an update last monday or tuesday, I also keep it up-to-date, but haven't had time to try and find the culprit...

Offline

#6 2020-02-08 21:46:00

Cryptix_00
Member
Registered: 2008-07-16
Posts: 120

Re: Screen flicker after resume from suspend [amdgpu]

Ah, I also have the radeon 5700 XT. I use a compton but even if I kill it, the problem persists until I restart X.

Not sure what you mean by using the modesetting driver

Offline

#7 2020-02-08 21:48:41

seth
Member
Registered: 2012-09-03
Posts: 13,725

Re: Screen flicker after resume from suspend [amdgpu]

Did you kill compton (should meanwhile be picom?) before suspending?

The modesetting driver is a generic kms driver for X11, it will be loaded if no other driver is available (or explicitly requested, in case you added some configlet that selects the amdgpu driver you have to move away that as well)

Offline

#8 2020-02-08 22:27:53

LuxFerre
Member
Registered: 2010-03-01
Posts: 9

Re: Screen flicker after resume from suspend [amdgpu]

I'd guess it's not compton (since I use plasma) nor xf86-video-amdgpu (because it wasn't updated recently). I have no idea what is causing it though...

Offline

#9 2020-02-08 22:29:53

seth
Member
Registered: 2012-09-03
Posts: 13,725

Re: Screen flicker after resume from suspend [amdgpu]

kwin (plasmas WM) has a built-in compositor (defaults to GL backend)…
SHIFT+Alt+F12 should toggle it.

Edit: also this could be a disparity between the kernel amdgpu module and the X11 driver, so a lack of update on one part is insignificant.

Last edited by seth (2020-02-08 22:30:50)

Offline

#10 2020-02-08 23:06:26

dbulashevich
Member
Registered: 2020-02-08
Posts: 2

Re: Screen flicker after resume from suspend [amdgpu]

I have the same problem running GNOME on Wayland. Downgrading kernel from 5.5.2 to 5.4.15 has solved the problem for me. I didn't downgrade any other packages.

Offline

#11 2020-02-08 23:10:20

LuxFerre
Member
Registered: 2010-03-01
Posts: 9

Re: Screen flicker after resume from suspend [amdgpu]

seth wrote:

kwin (plasmas WM) has a built-in compositor (defaults to GL backend)…
SHIFT+Alt+F12 should toggle it.

Sure I just meant I don't use the same compositor as Cryptix_00 so it seems to me that the problem is elsewhere.

Edit: also this could be a disparity between the kernel amdgpu module and the X11 driver, so a lack of update on one part is insignificant.

Could be that. I wonder if amdgpu-pro would make any difference? And why is it not recommended anyway? Wiki says it's slower, but they compared an old version.

Offline

#12 2020-02-09 07:44:25

seth
Member
Registered: 2012-09-03
Posts: 13,725

Re: Screen flicker after resume from suspend [amdgpu]

amdgpu-pro would only make a difference if the problem was the OpenGL context of either compositor (which is why the exact compositor doesn't matter)
modesetting would make a difference if it's the display server itself (or the GL context)

#10 is interesting because it's apparently not X11, but since the problem isn't indicated to be in the kernel, it could very be the GL context.

Other question: instead of restarting X11, does changing the resolution forth and back (eg. "xrandr --output <OUTPUT> --mode 1024x768; sleep 1; xrandr --output <OUTPUT> --auto") help?

Offline

#13 2020-02-09 09:04:12

dbulashevich
Member
Registered: 2020-02-08
Posts: 2

Re: Screen flicker after resume from suspend [amdgpu]

I didn't try changing resolution but changing frequency from 60Hz to 30Hz and back helped me.

Last edited by dbulashevich (2020-02-09 09:09:54)

Offline

#14 2020-02-09 13:08:49

Hooly
Member
From: Germany
Registered: 2020-02-05
Posts: 9

Re: Screen flicker after resume from suspend [amdgpu]

I've had this issue, too. https://bbs.archlinux.org/viewtopic.php?id=252681

For now I've disabled "suspend" to avoid this issue.


"I know that i know nothing"

Offline

#15 2020-02-09 16:33:52

LuxFerre
Member
Registered: 2010-03-01
Posts: 9

Re: Screen flicker after resume from suspend [amdgpu]

Hooly wrote:

I've had this issue, too. https://bbs.archlinux.org/viewtopic.php?id=252681

For now I've disabled "suspend" to avoid this issue.

Pretty sure yours is a different issue, in my case nothing disappears or crashes, it's just flickering/strange bars running across the screen (kinda like an old tv with antenna problems maybe)...

In my case changing the refresh frequency did not do anything, but changing the resolution does make the problem go away until the next resume from suspend.

Offline

#16 2020-02-10 03:54:24

maru
Member
Registered: 2019-01-03
Posts: 22

Re: Screen flicker after resume from suspend [amdgpu]

Same problem here. No flickering, but display won't resume after suspend. It started to happen yesterday after I upgraded my linux package. For now, only downgrading it to  linux-5.4.arch1-1 works.

Offline

#17 2020-02-10 19:00:30

bjo
Member
Registered: 2011-09-10
Posts: 59

Re: Screen flicker after resume from suspend [amdgpu]

Offline

#18 2020-02-10 22:24:33

LuxFerre
Member
Registered: 2010-03-01
Posts: 9

Re: Screen flicker after resume from suspend [amdgpu]

Yea I think that is it. Guess it should be fixed eventually then?

For now I'm ok with changing resolution and reverting right after every suspend...

Offline

#19 2020-02-11 06:04:25

Cryptix_00
Member
Registered: 2008-07-16
Posts: 120

Re: Screen flicker after resume from suspend [amdgpu]

I can confirm that dropping to 60Hz then bumping back to 100 with xrandr seemed to fix the problem without having to restart X

Offline

#20 2020-02-11 06:05:49

Cryptix_00
Member
Registered: 2008-07-16
Posts: 120

Re: Screen flicker after resume from suspend [amdgpu]

maru wrote:

Same problem here. No flickering, but display won't resume after suspend. It started to happen yesterday after I upgraded my linux package. For now, only downgrading it to  linux-5.4.arch1-1 works.


I've had a problem like this before as soon as I switched to amdgpu, turning my monitor on first to the point it's waiting for input, then resuming was an acceptable workaround for me. If I try to wake without the screen already on an 'primed' my display won't wake up either.

Offline

#21 2020-02-12 13:57:32

LuxFerre
Member
Registered: 2010-03-01
Posts: 9

Re: Screen flicker after resume from suspend [amdgpu]

Problem still persists after last kernel update (5.5.3-zen1-1-zen)...

Offline

#22 2020-02-12 14:01:55

bjo
Member
Registered: 2011-09-10
Posts: 59

Re: Screen flicker after resume from suspend [amdgpu]

Sure, kernel bug 205915 did not have any progress. So stick with the LTS kernel or use amdgpu.dc=0 if it does not cause any other issues for you.

Offline

#23 2020-02-13 03:01:43

haval
Member
Registered: 2019-10-13
Posts: 10

Re: Screen flicker after resume from suspend [amdgpu]

I'm on kernel 5.6rc1 and just started experiencing this in the last few days as well. GPU is 5700xt. If I set my refresh rate to 100hz or lower, the issue doesn't appear. But the tricks of jumping down and then back up in either refresh rate or resolution doesn't work for me. I have to stay at 100hz or lower. Have not tried amdgpu.dc=0 yet.

Offline

#24 2020-02-16 04:39:00

LoneLion
Member
Registered: 2020-02-16
Posts: 1

Re: Screen flicker after resume from suspend [amdgpu]

I also had the same problem after updating to kernel 5.5.x. My GPU is an RX 5700XT, and I am using sway, so It's definitely not an X problem. I can confirm that after switching to the LTS kernel (5.4) the problem has now gone away.

Offline

Board footer

Powered by FluxBB