problems with network in vm arch

callmer · 2021-01-08 07:28:12

Hi guys. I am new at arch. I just installed it in vm and I am not able to share with you files because network doesn't work here, ping google.com gives: name or service not known [after I added dns addresses in /etc/resolve.conf before it it was: temporary failure in name resolution ], curl google.com gives: couldn't resolve host. Then I switched to NAT in vm network setting, also useless. Have any Ideas? Thanks in advance.

seth · 2021-01-08 08:49:13

Start w/ some basic information.

1. How do you configure the network devices/connections?

find /etc/systemd -type l -exec test -f {} \; -print | awk -F'/' '{ printf ("%-40s | %s\n", $(NF-0), $(NF-1)) }' | sort -f

2. Output of "ip a; ip r"?
3. Output of "lspci; lsusb"?

callmer · 2021-01-08 09:22:18

seth wrote:

Start w/ some basic information.
1. How do you configure the network devices/connections?
find /etc/systemd -type l -exec test -f {} \; -print | awk -F'/' '{ printf ("%-40s | %s\n", $(NF-0), $(NF-1)) }' | sort -f
2. Output of "ip a; ip r"?
3. Output of "lspci; lsusb"?

1. FluxBB bbcode test
2. ip r: empty
3. lsusb: command not found

Sorry I can't nor copy-paste the result neither use pastebin service

Last edited by callmer (2021-01-08 09:23:41)

seth · 2021-01-08 09:28:21

Please replace the embedded images w/links.

You botched the "find" command, try

find /etc/systemd -type l -exec test -f {} \; -print

(the rest is mostly to fancy the output)

The NIC is there and up and you've a carrier but no lease, suggesting the answer to " How do you configure the network devices/connections?" is "not".
https://wiki.archlinux.org/index.php/Ne … management
You probably want to use dhcp.

Edit: stutter ;-)

Last edited by seth (2021-01-08 09:28:38)

callmer · 2021-01-08 09:40:17

seth wrote:

Please replace the embedded images w/links.
You botched the "find" command, try
find /etc/systemd -type l -exec test -f {} \; -print
(the rest is mostly to fancy the output)
The NIC is there and up and you've a carrier but no lease, suggesting the answer to " How do you configure the network devices/connections?" is "not".
https://wiki.archlinux.org/index.php/Ne … management
You probably want to use dhcp.
Edit: stutter ;-)

here is the link of image of find comman's result https://hkar.ru/13HxJ
Maybe, is it something that I should change in vm or in arch? I mean if I'll install arch on my real machine is it necessary to do likely network configurations? I'll let you know after reading article you sent.

edit: You are right I don't have DHCP, and one more thing I don't have tools from articles you sent(ifconfig for example)

Last edited by callmer (2021-01-08 09:48:27)

PPK · 2021-01-09 05:14:18

Arch doesn't include tool for connecting to network after installation. Boot into usb or whatever medium you are using again and install dhcpcd. Type "systemctl enable dhcpcd" afterward.

PPK · 2021-01-09 05:16:48

[double post]

Last edited by PPK (2021-01-10 08:27:59)

seth · 2021-01-09 08:03:19

When you install arch on your "real machine", ensure to follow the installation guide.
https://wiki.archlinux.org/index.php/In … l_packages

@PPK, you can't. You can report it and a mod can, but typically you'd just replace it w/ sth. like "[double post]" or so.

callmer · 2021-01-09 15:26:20

seth wrote:

When you install arch on your "real machine", ensure to follow the installation guide.
https://wiki.archlinux.org/index.php/In … l_packages
@PPK, you can't. You can report it and a mod can, but typically you'd just replace it w/ sth. like "[double post]" or so.

pacstrap: command not found

V1del · 2021-01-09 15:30:44

you need to do that from the iso. Mount your root partition somewhere and pacstrap the missing packages.

or as you do have systemd: https://wiki.archlinux.org/index.php/Systemd-networkd

Last edited by V1del (2021-01-09 15:32:14)

seth · 2021-01-09 15:30:47

pacstrap is available on the installation iso, not your installed system.
You need to read and follow the *entire* guide, I just linked the section you apparently missed.

Edit: ninja'd by seconds. Revenge of the V1del…

Last edited by seth (2021-01-09 15:31:23)

callmer · 2021-01-09 20:04:38

I am not sure, but it seems like the problem is that I deleted ISO before installing NetworkManager, so it hadn't configured internet. Am I right? Now it all works.

Last edited by callmer (2021-01-09 20:05:06)

Arch Linux

#1 2021-01-08 07:28:12

problems with network in vm arch

#2 2021-01-08 08:49:13

Re: problems with network in vm arch

#3 2021-01-08 09:22:18

Re: problems with network in vm arch

#4 2021-01-08 09:28:21

Re: problems with network in vm arch

#5 2021-01-08 09:40:17

Re: problems with network in vm arch

#6 2021-01-09 05:14:18

Re: problems with network in vm arch

#7 2021-01-09 05:16:48

Re: problems with network in vm arch

#8 2021-01-09 08:03:19

Re: problems with network in vm arch

#9 2021-01-09 15:26:20

Re: problems with network in vm arch

#10 2021-01-09 15:30:44

Re: problems with network in vm arch

#11 2021-01-09 15:30:47

Re: problems with network in vm arch

#12 2021-01-09 20:04:38

Re: problems with network in vm arch

Board footer