You are not logged in.

#26 2021-02-21 12:15:41

str0gg
Member
Registered: 2012-12-01
Posts: 57
Website

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

probably still better then treating repository stable as testing ...

Offline

#27 2021-02-21 12:43:01

williamvds
Member
From: United Kingdom
Registered: 2021-02-20
Posts: 4
Website

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

I've worked out how to run the webapp using the new user, it involves adding a new php-fpm pool. E.g. create /etc/php/php-fpm.d/nextcloud.conf: (or /etc/php7 if you're using a nextcloud package that uses php7):

[nextcloud]
user = nextcloud
group = nextcloud
listen = /run/nextcloud/nextcloud.sock
listen.owner = http
listen.group = http
chdir = /usr/share/webapps/nextcloud
pm = dynamic
pm.max_children = 15
pm.start_servers = 2
pm.min_spare_servers = 1
pm.max_spare_servers = 3
env[TMP] = /tmp

Note that listen.owner & listen.group should match your web server's user/group (I'm running nginx with the default user/group, http)
Then update your nginx config or whatever to use this pool's socket:

upstream php-handler {
        server unix:/run/nextcloud/nextcloud.sock;
}

I'll update the wiki with these instructions. The maintainer seems to have picked up the same idea so here's hoping he provides a sample config file in a future version of the package.

Offline

#28 2021-02-21 12:49:30

miro279
Member
Registered: 2010-10-02
Posts: 150

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

str0gg wrote:

show fastcgi configuration


what would you like to see?
/etc/php/php-fpm.conf

;;;;;;;;;;;;;;;;;;;;;
; FPM Configuration ;
;;;;;;;;;;;;;;;;;;;;;

; All relative paths in this configuration file are relative to PHP's install
; prefix (/usr). This prefix can be dynamically changed by using the
; '-p' argument from the command line.

;;;;;;;;;;;;;;;;;;
; Global Options ;
;;;;;;;;;;;;;;;;;;

[global]
; Pid file
; Note: the default prefix is /var
; Default Value: none
;pid = /run/php-fpm/php-fpm.pid

; Error log file
; If it's set to "syslog", log is sent to syslogd instead of being written
; into a local file.
; Note: the default prefix is /var
; Default Value: log/php-fpm.log
error_log = syslog

; syslog_facility is used to specify what type of program is logging the
; message. This lets syslogd specify that messages from different facilities
; will be handled differently.
; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
; Default Value: daemon
;syslog.facility = daemon

; syslog_ident is prepended to every message. If you have multiple FPM
; instances running on the same server, you can change the default value
; which must suit common needs.
; Default Value: php-fpm
;syslog.ident = php-fpm

; Log level
; Possible Values: alert, error, warning, notice, debug
; Default Value: notice
;log_level = notice

; Log limit on number of characters in the single line (log entry). If the
; line is over the limit, it is wrapped on multiple lines. The limit is for
; all logged characters including message prefix and suffix if present. However
; the new line character does not count into it as it is present only when
; logging to a file descriptor. It means the new line character is not present
; when logging to syslog.
; Default Value: 1024
;log_limit = 4096

; Log buffering specifies if the log line is buffered which means that the
; line is written in a single write operation. If the value is false, then the
; data is written directly into the file descriptor. It is an experimental
; option that can potentionaly improve logging performance and memory usage
; for some heavy logging scenarios. This option is ignored if logging to syslog
; as it has to be always buffered.
; Default value: yes
;log_buffering = no

; If this number of child processes exit with SIGSEGV or SIGBUS within the time
; interval set by emergency_restart_interval then FPM will restart. A value
; of '0' means 'Off'.
; Default Value: 0
;emergency_restart_threshold = 0

; Interval of time used by emergency_restart_interval to determine when
; a graceful restart will be initiated.  This can be useful to work around
; accidental corruptions in an accelerator's shared memory.
; Available Units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;emergency_restart_interval = 0

; Time limit for child processes to wait for a reaction on signals from master.
; Available units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;process_control_timeout = 0

; The maximum number of processes FPM will fork. This has been designed to control
; the global number of processes when using dynamic PM within a lot of pools.
; Use it with caution.
; Note: A value of 0 indicates no limit
; Default Value: 0
; process.max = 128

; Specify the nice(2) priority to apply to the master process (only if set)
; The value can vary from -19 (highest priority) to 20 (lowest priority)
; Note: - It will only work if the FPM master process is launched as root
;       - The pool process will inherit the master process priority
;         unless specified otherwise
; Default Value: no set
; process.priority = -19

; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
; Default Value: yes
;daemonize = yes

; Set open file descriptor rlimit for the master process.
; Default Value: system defined value
;rlimit_files = 1024

; Set max core size rlimit for the master process.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0

; Specify the event mechanism FPM will use. The following is available:
; - select     (any POSIX os)
; - poll       (any POSIX os)
; - epoll      (linux >= 2.5.44)
; - kqueue     (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
; - /dev/poll  (Solaris >= 7)
; - port       (Solaris >= 10)
; Default Value: not set (auto detection)
;events.mechanism = epoll

; When FPM is built with systemd integration, specify the interval,
; in seconds, between health report notification to systemd.
; Set to 0 to disable.
; Available Units: s(econds), m(inutes), h(ours)
; Default Unit: seconds
; Default value: 10
;systemd_interval = 10

;;;;;;;;;;;;;;;;;;;;
; Pool Definitions ;
;;;;;;;;;;;;;;;;;;;;

; Multiple pools of child processes may be started with different listening
; ports and different management options.  The name of the pool will be
; used in logs and stats. There is no limitation on the number of pools which
; FPM can handle. Your system will tell you anyway :)

; Include one or more files. If glob(3) exists, it is used to include a bunch of
; files from a glob(3) pattern. This directive can be used everywhere in the
; file.
; Relative path can also be used. They will be prefixed by:
;  - the global prefix if it's been set (-p argument)
;  - /usr otherwise
include=/etc/php/php-fpm.d/*.conf

/etc/php/php-fpm.d/www.conf

; Start a new pool named 'www'.
; the variable $pool can be used in any directive and will be replaced by the
; pool name ('www' here)
[www]

; Per pool prefix
; It only applies on the following directives:
; - 'access.log'
; - 'slowlog'
; - 'listen' (unixsocket)
; - 'chroot'
; - 'chdir'
; - 'php_values'
; - 'php_admin_values'
; When not set, the global prefix (or /usr) applies instead.
; Note: This directive can also be relative to the global prefix.
; Default Value: none
;prefix = /path/to/pools/$pool

; Unix user/group of processes
; Note: The user is mandatory. If the group is not set, the default user's group
;       will be used.
user = http
group = http

; The address on which to accept FastCGI requests.
; Valid syntaxes are:
;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific IPv4 address on
;                            a specific port;
;   '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
;                            a specific port;
;   'port'                 - to listen on a TCP socket to all addresses
;                            (IPv6 and IPv4-mapped) on a specific port;
;   '/path/to/unix/socket' - to listen on a unix socket.
; Note: This value is mandatory.
listen = /run/php-fpm/php-fpm.sock

; Set listen(2) backlog.
; Default Value: 511 (-1 on FreeBSD and OpenBSD)
;listen.backlog = 511

; Set permissions for unix socket, if one is used. In Linux, read/write
; permissions must be set in order to allow connections from a web server. Many
; BSD-derived systems allow connections regardless of permissions. The owner
; and group can be specified either by name or by their numeric IDs.
; Default Values: user and group are set as the running user
;                 mode is set to 0660
listen.owner = http
listen.group = http
;listen.mode = 0660
; When POSIX Access Control Lists are supported you can set them using
; these options, value is a comma separated list of user/group names.
; When set, listen.owner and listen.group are ignored
;listen.acl_users =
;listen.acl_groups =

; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect.
; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
; must be separated by a comma. If this value is left blank, connections will be
; accepted from any ip address.
; Default Value: any
;listen.allowed_clients = 127.0.0.1

; Specify the nice(2) priority to apply to the pool processes (only if set)
; The value can vary from -19 (highest priority) to 20 (lower priority)
; Note: - It will only work if the FPM master process is launched as root
;       - The pool processes will inherit the master process priority
;         unless it specified otherwise
; Default Value: no set
; process.priority = -19

; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user
; or group is different than the master process user. It allows to create process
; core dump and ptrace the process for the pool user.
; Default Value: no
; process.dumpable = yes

; Choose how the process manager will control the number of child processes.
; Possible Values:
;   static  - a fixed number (pm.max_children) of child processes;
;   dynamic - the number of child processes are set dynamically based on the
;             following directives. With this process management, there will be
;             always at least 1 children.
;             pm.max_children      - the maximum number of children that can
;                                    be alive at the same time.
;             pm.start_servers     - the number of children created on startup.
;             pm.min_spare_servers - the minimum number of children in 'idle'
;                                    state (waiting to process). If the number
;                                    of 'idle' processes is less than this
;                                    number then some children will be created.
;             pm.max_spare_servers - the maximum number of children in 'idle'
;                                    state (waiting to process). If the number
;                                    of 'idle' processes is greater than this
;                                    number then some children will be killed.
;  ondemand - no children are created at startup. Children will be forked when
;             new requests will connect. The following parameter are used:
;             pm.max_children           - the maximum number of children that
;                                         can be alive at the same time.
;             pm.process_idle_timeout   - The number of seconds after which
;                                         an idle process will be killed.
; Note: This value is mandatory.
pm = dynamic

; The number of child processes to be created when pm is set to 'static' and the
; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
; This value sets the limit on the number of simultaneous requests that will be
; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
; CGI. The below defaults are based on a server without much resources. Don't
; forget to tweak pm.* to fit your needs.
; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
; Note: This value is mandatory.
pm.max_children = 5

; The number of child processes created on startup.
; Note: Used only when pm is set to 'dynamic'
; Default Value: (min_spare_servers + max_spare_servers) / 2
pm.start_servers = 2

; The desired minimum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.min_spare_servers = 1

; The desired maximum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.max_spare_servers = 3

; The number of seconds after which an idle process will be killed.
; Note: Used only when pm is set to 'ondemand'
; Default Value: 10s
;pm.process_idle_timeout = 10s;

; The number of requests each child process should execute before respawning.
; This can be useful to work around memory leaks in 3rd party libraries. For
; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
; Default Value: 0
;pm.max_requests = 500

; The URI to view the FPM status page. If this value is not set, no URI will be
; recognized as a status page. It shows the following information:
;   pool                 - the name of the pool;
;   process manager      - static, dynamic or ondemand;
;   start time           - the date and time FPM has started;
;   start since          - number of seconds since FPM has started;
;   accepted conn        - the number of request accepted by the pool;
;   listen queue         - the number of request in the queue of pending
;                          connections (see backlog in listen(2));
;   max listen queue     - the maximum number of requests in the queue
;                          of pending connections since FPM has started;
;   listen queue len     - the size of the socket queue of pending connections;
;   idle processes       - the number of idle processes;
;   active processes     - the number of active processes;
;   total processes      - the number of idle + active processes;
;   max active processes - the maximum number of active processes since FPM
;                          has started;
;   max children reached - number of times, the process limit has been reached,
;                          when pm tries to start more children (works only for
;                          pm 'dynamic' and 'ondemand');
; Value are updated in real time.
; Example output:
;   pool:                 www
;   process manager:      static
;   start time:           01/Jul/2011:17:53:49 +0200
;   start since:          62636
;   accepted conn:        190460
;   listen queue:         0
;   max listen queue:     1
;   listen queue len:     42
;   idle processes:       4
;   active processes:     11
;   total processes:      15
;   max active processes: 12
;   max children reached: 0
;
; By default the status page output is formatted as text/plain. Passing either
; 'html', 'xml' or 'json' in the query string will return the corresponding
; output syntax. Example:
;   http://www.foo.bar/status
;   http://www.foo.bar/status?json
;   http://www.foo.bar/status?html
;   http://www.foo.bar/status?xml
;
; By default the status page only outputs short status. Passing 'full' in the
; query string will also return status for each pool process.
; Example:
;   http://www.foo.bar/status?full
;   http://www.foo.bar/status?json&full
;   http://www.foo.bar/status?html&full
;   http://www.foo.bar/status?xml&full
; The Full status returns for each process:
;   pid                  - the PID of the process;
;   state                - the state of the process (Idle, Running, ...);
;   start time           - the date and time the process has started;
;   start since          - the number of seconds since the process has started;
;   requests             - the number of requests the process has served;
;   request duration     - the duration in µs of the requests;
;   request method       - the request method (GET, POST, ...);
;   request URI          - the request URI with the query string;
;   content length       - the content length of the request (only with POST);
;   user                 - the user (PHP_AUTH_USER) (or '-' if not set);
;   script               - the main script called (or '-' if not set);
;   last request cpu     - the %cpu the last request consumed
;                          it's always 0 if the process is not in Idle state
;                          because CPU calculation is done when the request
;                          processing has terminated;
;   last request memory  - the max amount of memory the last request consumed
;                          it's always 0 if the process is not in Idle state
;                          because memory calculation is done when the request
;                          processing has terminated;
; If the process is in Idle state, then informations are related to the
; last request the process has served. Otherwise informations are related to
; the current request being served.
; Example output:
;   ************************
;   pid:                  31330
;   state:                Running
;   start time:           01/Jul/2011:17:53:49 +0200
;   start since:          63087
;   requests:             12808
;   request duration:     1250261
;   request method:       GET
;   request URI:          /test_mem.php?N=10000
;   content length:       0
;   user:                 -
;   script:               /home/fat/web/docs/php/test_mem.php
;   last request cpu:     0.00
;   last request memory:  0
;
; Note: There is a real-time FPM status monitoring sample web page available
;       It's available in: /usr/share/php/fpm/status.html
;
; Note: The value must start with a leading slash (/). The value can be
;       anything, but it may not be a good idea to use the .php extension or it
;       may conflict with a real PHP file.
; Default Value: not set
;pm.status_path = /status

; The address on which to accept FastCGI status request. This creates a new
; invisible pool that can handle requests independently. This is useful
; if the main pool is busy with long running requests because it is still possible
; to get the status before finishing the long running requests.
;
; Valid syntaxes are:
;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific IPv4 address on
;                            a specific port;
;   '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
;                            a specific port;
;   'port'                 - to listen on a TCP socket to all addresses
;                            (IPv6 and IPv4-mapped) on a specific port;
;   '/path/to/unix/socket' - to listen on a unix socket.
; Default Value: value of the listen option
;pm.status_listen = 127.0.0.1:9001

; The ping URI to call the monitoring page of FPM. If this value is not set, no
; URI will be recognized as a ping page. This could be used to test from outside
; that FPM is alive and responding, or to
; - create a graph of FPM availability (rrd or such);
; - remove a server from a group if it is not responding (load balancing);
; - trigger alerts for the operating team (24/7).
; Note: The value must start with a leading slash (/). The value can be
;       anything, but it may not be a good idea to use the .php extension or it
;       may conflict with a real PHP file.
; Default Value: not set
;ping.path = /ping

; This directive may be used to customize the response of a ping request. The
; response is formatted as text/plain with a 200 response code.
; Default Value: pong
;ping.response = pong

; The access log file
; Default: not set
;access.log = log/$pool.access.log

; The access log format.
; The following syntax is allowed
;  %%: the '%' character
;  %C: %CPU used by the request
;      it can accept the following format:
;      - %{user}C for user CPU only
;      - %{system}C for system CPU only
;      - %{total}C  for user + system CPU (default)
;  %d: time taken to serve the request
;      it can accept the following format:
;      - %{seconds}d (default)
;      - %{milliseconds}d
;      - %{mili}d
;      - %{microseconds}d
;      - %{micro}d
;  %e: an environment variable (same as $_ENV or $_SERVER)
;      it must be associated with embraces to specify the name of the env
;      variable. Some examples:
;      - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
;      - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
;  %f: script filename
;  %l: content-length of the request (for POST request only)
;  %m: request method
;  %M: peak of memory allocated by PHP
;      it can accept the following format:
;      - %{bytes}M (default)
;      - %{kilobytes}M
;      - %{kilo}M
;      - %{megabytes}M
;      - %{mega}M
;  %n: pool name
;  %o: output header
;      it must be associated with embraces to specify the name of the header:
;      - %{Content-Type}o
;      - %{X-Powered-By}o
;      - %{Transfert-Encoding}o
;      - ....
;  %p: PID of the child that serviced the request
;  %P: PID of the parent of the child that serviced the request
;  %q: the query string
;  %Q: the '?' character if query string exists
;  %r: the request URI (without the query string, see %q and %Q)
;  %R: remote IP address
;  %s: status (response code)
;  %t: server time the request was received
;      it can accept a strftime(3) format:
;      %d/%b/%Y:%H:%M:%S %z (default)
;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
;  %T: time the log has been written (the request has finished)
;      it can accept a strftime(3) format:
;      %d/%b/%Y:%H:%M:%S %z (default)
;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
;  %u: remote user
;
; Default: "%R - %u %t \"%m %r\" %s"
;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"

; The log file for slow requests
; Default Value: not set
; Note: slowlog is mandatory if request_slowlog_timeout is set
;slowlog = log/$pool.log.slow

; The timeout for serving a single request after which a PHP backtrace will be
; dumped to the 'slowlog' file. A value of '0s' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
;request_slowlog_timeout = 0

; Depth of slow log stack trace.
; Default Value: 20
;request_slowlog_trace_depth = 20

; The timeout for serving a single request after which the worker process will
; be killed. This option should be used when the 'max_execution_time' ini option
; does not stop script execution for some reason. A value of '0' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
;request_terminate_timeout = 0

; The timeout set by 'request_terminate_timeout' ini option is not engaged after
; application calls 'fastcgi_finish_request' or when application has finished and
; shutdown functions are being called (registered via register_shutdown_function).
; This option will enable timeout limit to be applied unconditionally
; even in such cases.
; Default Value: no
;request_terminate_timeout_track_finished = no

; Set open file descriptor rlimit.
; Default Value: system defined value
;rlimit_files = 1024

; Set max core size rlimit.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0

; Chroot to this directory at the start. This value must be defined as an
; absolute path. When this value is not set, chroot is not used.
; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
; of its subdirectories. If the pool prefix is not set, the global prefix
; will be used instead.
; Note: chrooting is a great security feature and should be used whenever
;       possible. However, all PHP paths will be relative to the chroot
;       (error_log, sessions.save_path, ...).
; Default Value: not set
;chroot =

; Chdir to this directory at the start.
; Note: relative path can be used.
; Default Value: current directory or / when chroot
;chdir = /srv/http

; Redirect worker stdout and stderr into main error log. If not set, stdout and
; stderr will be redirected to /dev/null according to FastCGI specs.
; Note: on highloaded environment, this can cause some delay in the page
; process time (several ms).
; Default Value: no
;catch_workers_output = yes

; Decorate worker output with prefix and suffix containing information about
; the child that writes to the log and if stdout or stderr is used as well as
; log level and time. This options is used only if catch_workers_output is yes.
; Settings to "no" will output data as written to the stdout or stderr.
; Default value: yes
;decorate_workers_output = no

; Clear environment in FPM workers
; Prevents arbitrary environment variables from reaching FPM worker processes
; by clearing the environment in workers before env vars specified in this
; pool configuration are added.
; Setting to "no" will make all environment variables available to PHP code
; via getenv(), $_ENV and $_SERVER.
; Default Value: yes
;clear_env = no

; Limits the extensions of the main script FPM will allow to parse. This can
; prevent configuration mistakes on the web server side. You should only limit
; FPM to .php extensions to prevent malicious users to use other extensions to
; execute php code.
; Note: set an empty value to allow all extensions.
; Default Value: .php
;security.limit_extensions = .php .php3 .php4 .php5 .php7

; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
; the current environment.
; Default Value: clean env
env[HOSTNAME] = $HOSTNAME
env[PATH] = /usr/local/bin:/usr/bin:/bin
env[TMP] = /tmp
env[TMPDIR] = /tmp
env[TEMP] = /tmp

; Additional php.ini defines, specific to this pool of workers. These settings
; overwrite the values previously defined in the php.ini. The directives are the
; same as the PHP SAPI:
;   php_value/php_flag             - you can set classic ini defines which can
;                                    be overwritten from PHP call 'ini_set'.
;   php_admin_value/php_admin_flag - these directives won't be overwritten by
;                                     PHP call 'ini_set'
; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.

; Defining 'extension' will load the corresponding shared extension from
; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
; overwrite previously defined php.ini values, but will append the new value
; instead.

; Note: path INI options can be relative and will be expanded with the prefix
; (pool, global or /usr)

; Default Value: nothing is defined by default except the values in php.ini and
;                specified at startup with the -d argument
;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
;php_flag[display_errors] = off
;php_admin_value[error_log] = /var/log/fpm-php.www.log
;php_admin_flag[log_errors] = on
;php_admin_value[memory_limit] = 32M

changing the owner back to http like suggested alone did not solve the problem.

Offline

#29 2021-02-21 13:24:23

dictummortuum
Member
Registered: 2020-01-05
Posts: 5

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

What worked for me as a workaround to get nextcloud 21 working until I can get php8 fully functional:

0. install php7-fpm , php7-intl , php7-gd , php7-redis (if you use it).
1. diff /etc/php and /etc/php7. /etc/php should have your settings and they should be ported to /etc/php7.
2. stop php-fpm, systemctl edit php-fpm7 , add the paths to avoid the "cannot edit the configuration" error of nextcloud.
3. backup your configuration, should be under /etc/webapps/nextcloud/config/config.php . Then overwrite the file /etc/webapps/nextcloud/config.php with the previous one. Make sure that this file has http : http owner/group (or insert the user your webserver is using).
4. make sure that your webserver will redirect the traffic to the correct socket for php-fpm7, which should be /run/php-fpm7/php-fpm.sock.
5. sudo -u http php7 /usr/share/webapps/nextcloud/occ upgrade
6. restart php-fpm7, nginx

Offline

#30 2021-02-21 13:57:45

str0gg
Member
Registered: 2012-12-01
Posts: 57
Website

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

@miro279

systemctl edit php-fpm
[Service]
ReadWritePaths = /usr/share/webapps/nextcloud/
ReadWritePaths = /etc/webapps/nextcloud/


and also check permissions on folders and files.
recreate configuration file /etc/webapps/nextcloud/config.php

after this login to root
USER=http occ upgrade

Offline

#31 2021-02-21 16:07:17

madevr
Member
Registered: 2013-11-18
Posts: 7

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

Did anyone get the custom app directory to work yet?

For me almost everything works, and I can also install apps into /var/lib/nextcloud/apps/, but if I open Nextcloud in the browser the app icons at the top are missing (translated texts like "Calendar" show up, but no icon). When I try to open e.g. the calendar app by clicking on the empty icon, I only get an empty page.

Found no logs anywhere, except in the browser log "could not load <script> with source "https://XXX/wapps/calendar/js/calendar.js?v=430852ba-0"

Do I have to configure nginx somehow so that this also works? In my previous installation, I had the apps in the standard directory, which is now not writable anymore.
All standard apps (dashboard, files, photos) work without problem.

All permissions seem to be in place as well...

EDIT: solved.
Permission issue, the http user needs to access /var/lib/nextcloud/apps, otherwise it won't work. However permissions on /var/lib/nextcloud are too strict. Bug opened by someone else: https://bugs.archlinux.org/task/69730

Last edited by madevr (2021-02-21 17:45:00)

Offline

#32 2021-02-21 17:06:24

miro279
Member
Registered: 2010-10-02
Posts: 150

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

I could start the update process, but it fails with an unhandled exception:

Starting code integrity check...
An unhandled exception has been thrown:
TypeError: decbin(): Argument #1 ($num) must be of type int, float given in /usr/share/webapps/nextcloud/3rdparty/phpseclib/phpseclib/phpseclib/Math/BigInteger.php:662
Stack trace:
#0 /usr/share/webapps/nextcloud/3rdparty/phpseclib/phpseclib/phpseclib/Math/BigInteger.php(662): decbin()
#1 /usr/share/webapps/nextcloud/3rdparty/phpseclib/phpseclib/phpseclib/Crypt/RSA.php(2848): phpseclib\Math\BigInteger->toBits()
#2 /usr/share/webapps/nextcloud/3rdparty/phpseclib/phpseclib/phpseclib/Crypt/RSA.php(3177): phpseclib\Crypt\RSA->_rsassa_pss_verify()
#3 /usr/share/webapps/nextcloud/lib/private/IntegrityCheck/Checker.php(371): phpseclib\Crypt\RSA->verify()
#4 /usr/share/webapps/nextcloud/lib/private/IntegrityCheck/Checker.php(571): OC\IntegrityCheck\Checker->verify()
#5 /usr/share/webapps/nextcloud/lib/private/IntegrityCheck/Checker.php(592): OC\IntegrityCheck\Checker->verifyCoreSignature()
#6 /usr/share/webapps/nextcloud/lib/private/Updater.php(288): OC\IntegrityCheck\Checker->runInstanceVerification()
#7 /usr/share/webapps/nextcloud/lib/private/Updater.php(132): OC\Updater->doUpgrade()
#8 /usr/share/webapps/nextcloud/core/Command/Upgrade.php(255): OC\Updater->upgrade()
#9 /usr/share/webapps/nextcloud/3rdparty/symfony/console/Command/Command.php(255): OC\Core\Command\Upgrade->execute()
#10 /usr/share/webapps/nextcloud/3rdparty/symfony/console/Application.php(1009): Symfony\Component\Console\Command\Command->run()
#11 /usr/share/webapps/nextcloud/3rdparty/symfony/console/Application.php(273): Symfony\Component\Console\Application->doRunCommand()
#12 /usr/share/webapps/nextcloud/3rdparty/symfony/console/Application.php(149): Symfony\Component\Console\Application->doRun()
#13 /usr/share/webapps/nextcloud/lib/private/Console/Application.php(215): Symfony\Component\Console\Application->run()
#14 /usr/share/webapps/nextcloud/console.php(100): OC\Console\Application->run()
#15 /usr/share/webapps/nextcloud/occ(11): require_once('...')
#16 {main}

Offline

#33 2021-02-21 17:21:36

Webbeh
Member
Registered: 2012-07-08
Posts: 49

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

Well I don't know bout you guys, but I'm personnaly having a REALLY bad time.

Setup :
NEW installation on a NEW machine, nothing was installed before. Linux 5.10.16-arch1-1, installed it around 7 hours ago.

Packages installed :
apache
mariadb
redis
imagemagick
php
php-apcu
php-fpm
php-gd
php-geoip
php-igbinary
php-imagick
php-imap
php-intl
php-memcached
nextcloud 21.0.0-6


Did the installation of apache/mysql/php as usual (with all the PHP-FPM suggestions that I found either here or on the main wiki) with the only exception that I enabled HTTP/2.

The result is that absolutely nothing wants to work.

The default install shows a 500 internal server error on the webpage, with either
- the provided config.php present
- the provided config.php deleted
- my previous config.php copied over

I tried using all kind of combination of http:http and nextcloud:nextcloud owner on both /etc/webapps/nextcloud and/or /usr/share/webapps/nextcloud

The closest I got is having a [2006] Mysql server is gone error from `occ` with a 500 internal server error webpage showing that the mysql driver is not present.

`php -m | grep my` shows mysqli, mysqlnd and pdo_mysql

I really don't have a freaking clue on what happens. It messed up my main server (which was using mpm_prefork and apache's mod_php) which is why I tried a new machine from scratch, and I now have zero clue as to what is happening or what I'm supposed to do.

If you guys have any idea, please let me know, I'm dying to have an answer.

EDIT: new machine, just tried with mod_php as well, same result.
Tried to access mysql through localhost:3306, 127.0.0.1:3306 or localhost:/run/mysqld/mysqld.sock (which is present). All three respond properly when trying to manually connect to the database with the user/password that I set.

Last edited by Webbeh (2021-02-21 17:27:59)

Offline

#34 2021-02-21 17:46:11

C13251
Member
Registered: 2013-12-13
Posts: 4

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

DocSniper wrote:
C13251 wrote:

4. You should also fix your pacman hook if you have one:

rm /etc/pacman.d/hooks/nextcloud.hook && ln -s /usr/share/doc/nextcloud/nextcloud.hook /etc/pacman.d/hooks/nextcloud.hook

Attention with the hook, better first copy the file and do not set a symlink until the author has cleaned up the matter with the nextcloud user.
Because this file will run the update routine as user nextcloud and not as user http.
So better copy the file for now and change the user to http.

Agree. Thank you. Edited the first post smile

Offline

#35 2021-02-21 17:53:32

Webbeh
Member
Registered: 2012-07-08
Posts: 49

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

Webbeh wrote:

snip


Tried all the same with php7 instead, same error : MySQL server has gone away.

I should maybe mention that with php7 or php8, mariadb seems to not receive any authentication information and, in journalctl, shows :

Feb 21 18:51:42 host.name mariadbd[93330]: 2021-02-21 18:51:42 69 [Warning] Aborted connection 69 to db: 'unconnected' user: 'unauthenticated' host: 'localhost' (This connection closed normally without authentication)

Offline

#36 2021-02-21 18:33:12

Thaodan
Member
From: Dortmund, Nordrein-Westfalen
Registered: 2012-04-28
Posts: 448

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

midixinga wrote:

Is it really a good idea to change user back to http, if Maintainer (and Upstream?) decided not to do so?

See also
https://bugs.archlinux.org/task/69718

The package data is maintained by the package manager and not the application, it is insecure having the application with write access to its data especially with one that  is open to the outside.

You complain now because you do not configure the software properly.

If you use the nextcloud the permissions are more separted between the other apps that use the http user.


Linux odin 3.13.1-pf #1 SMP PREEMPT Wed Mar 5 21:47:28 CET 2014 x86_64 GNU/Linux

Offline

#37 2021-02-21 20:04:27

bedouin
Member
Registered: 2021-01-30
Posts: 1

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

One more thing I noticed - I'm doing pwauth ("Unix user backend" app) authentication of a handful of nextcloud system users. The respective AUR package https://aur.archlinux.org/packages/pwauth/ compiles to only allow user #33 (http) to suid run pwauth, thus breaking authentication running from this new "nextcloud" user. No idea how to fix this except re-compile pwauth with #define SERVER_UIDS 33,960 (960 being the nextcloud uid).

Last edited by bedouin (2021-02-21 20:15:18)

Offline

#38 2021-02-21 20:48:14

str0gg
Member
Registered: 2012-12-01
Posts: 57
Website

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

patch for nextcloud-sytemd-timers with nextcloud user

diff --git a/PKGBUILD b/PKGBUILD
index 8068f71..ac8a5ea 100644
--- a/PKGBUILD
+++ b/PKGBUILD
@@ -1,6 +1,6 @@
 # Maintainer: Dominik Schrempf <dominik.schrempf@gmail.com>
 pkgname=nextcloud-systemd-timers
-pkgver=0.8.0
+pkgver=0.9.1
 pkgrel=1
 epoch=
 pkgdesc="Systemd services and timers for Nextcloud background jobs (see Nextcloud Arch Wiki entry)."
@@ -29,15 +29,15 @@ source=("nextcloud-app-update-all.service"
         "nextcloud-preview-generate-all.timer"
         "nextcloud-preview-pre-generate.service"
         "nextcloud-preview-pre-generate.timer")
-sha256sums=('5977e1ea5893fa36ad022f3a080d9b0ebfa9ab90e6b37ac884546e5311df46be'
+sha256sums=('0706490da2a72647c2d98d52001004ab79b1747eeab330e7653f1e06ab5408dd'
             '39039f1a3dc23022fccc991daca86d77e7d41be275566f6892cd6b290fa0da4a'
-            'e1d841b6b133a6c9bed910297a7d899f5669d7e759c1dca1a288658f96576713'
+            'f94d1af5133576f02ba39756d415f34fb0de8e9d27d9c1e9a9feff68c1b788be'
             'a7db3a28abfee48393bd70dc71e9abf813130169229f2a35b072cc11dbd09863'
-            '58cb60d2630248cf92ddb15e18f455d6ffe6d6b151173fc7d975d622e28e32fa'
+            '88beeaaad1a05911314fbc6e7db8d316f7ec6d42df107fcd3b1c52cf291f1333'
             '2f191059b619141ba883ae132af56460212c84eb208f087b87b79b0a3b9e4900'
-            'a8fc7e7431086a19a19729e9c71f7d5b26c8e2cb51d76b2c41dbd982f109f713'
+            '4713096a56800abde60380cbf80a45bb60fd83a12dec9ffc93c52283f06fb597'
             'bd4bbd01a9d68e0217c3b48c977dda881fd956b53f981a6e32af0357d2e0b716'
-            '6bb27c8b9f67121c5f68cd265393f43ad6d82b9576bbb970844f10df951c42fe'
+            '7bc2cb4ae0073bcbb42d86f4e2ce92ca81623dc0ea4b8a631baf0ab4338e8937'
             '56e3cab181040101be05d4b7723825f7b0c082c34403e42c6f0934c6474a6a43')
 noextract=()
 
diff --git a/nextcloud-app-update-all.service b/nextcloud-app-update-all.service
index 14f658d..5988264 100644
--- a/nextcloud-app-update-all.service
+++ b/nextcloud-app-update-all.service
@@ -2,8 +2,8 @@
 Description=Nextcloud; update all applications
 
 [Service]
-User=http
-ExecStart=/usr/bin/php7 -f /usr/share/webapps/nextcloud/occ app:update --all
+User=nextcloud
+ExecStart=/usr/bin/php -f /usr/share/webapps/nextcloud/occ app:update --all
 
 [Install]
 WantedBy=basic.target
diff --git a/nextcloud-cron.service b/nextcloud-cron.service
index e716312..9201fb0 100644
--- a/nextcloud-cron.service
+++ b/nextcloud-cron.service
@@ -2,8 +2,8 @@
 Description=Nextcloud; run cron.php
 
 [Service]
-User=http
-ExecStart=/usr/bin/php7 -f /usr/share/webapps/nextcloud/cron.php
+User=nextcloud
+ExecStart=/usr/bin/php -f /usr/share/webapps/nextcloud/cron.php
 
 [Install]
 WantedBy=basic.target
diff --git a/nextcloud-files-scan-all.service b/nextcloud-files-scan-all.service
index 82c36b5..f61d461 100644
--- a/nextcloud-files-scan-all.service
+++ b/nextcloud-files-scan-all.service
@@ -2,8 +2,8 @@
 Description=Nextcloud; scan all files
 
 [Service]
-User=http
-ExecStart=/usr/bin/php7 -f /usr/share/webapps/nextcloud/occ files:scan --all
+User=nextcloud
+ExecStart=/usr/bin/php -f /usr/share/webapps/nextcloud/occ files:scan --all
 
 [Install]
 WantedBy=basic.target
diff --git a/nextcloud-preview-generate-all.service b/nextcloud-preview-generate-all.service
index a0059ae..df9a079 100644
--- a/nextcloud-preview-generate-all.service
+++ b/nextcloud-preview-generate-all.service
@@ -2,8 +2,8 @@
 Description=Nextcloud; generate previews for all files
 
 [Service]
-User=http
-ExecStart=/usr/bin/php7 -f /usr/share/webapps/nextcloud/occ preview:generate-all
+User=nextcloud
+ExecStart=/usr/bin/php -f /usr/share/webapps/nextcloud/occ preview:generate-all
 
 [Install]
 WantedBy=basic.target
diff --git a/nextcloud-preview-pre-generate.service b/nextcloud-preview-pre-generate.service
index 7a128db..30a4dff 100644
--- a/nextcloud-preview-pre-generate.service
+++ b/nextcloud-preview-pre-generate.service
@@ -2,8 +2,8 @@
 Description=Nextcloud; generate previews for new files only
 
 [Service]
-User=http
-ExecStart=/usr/bin/php7 -f /usr/share/webapps/nextcloud/occ preview:pre-generate
+User=nextcloud
+ExecStart=/usr/bin/php -f /usr/share/webapps/nextcloud/occ preview:pre-generate
 
 [Install]
 WantedBy=basic.target

Offline

#39 2021-02-21 20:50:24

str0gg
Member
Registered: 2012-12-01
Posts: 57
Website

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

1. did someone resolve temporary is not  present or writable?
2. 2FA?

Offline

#40 2021-02-21 22:21:39

williamvds
Member
From: United Kingdom
Registered: 2021-02-20
Posts: 4
Website

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

str0gg wrote:

1. did someone resolve temporary is not  present or writable?
2. 2FA?

Have you checked that the TMP env var is being passed onto Nextcloud? E.g. in your php-fpm .conf. I've got in /etc/php/php-fpm.d/nextcloud.conf:

[nextcloud]
...
env[TMP] = /tmp

Last edited by williamvds (2021-02-21 22:21:57)

Offline

#41 2021-02-21 23:38:08

midixinga
Member
Registered: 2014-01-18
Posts: 191

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

Thaodan wrote:
midixinga wrote:

Is it really a good idea to change user back to http, if Maintainer (and Upstream?) decided not to do so?

See also
https://bugs.archlinux.org/task/69718

<...>
You complain now because you do not configure the software properly.
<...>

hmm Sorry, what should I've done?

Offline

#42 2021-02-22 02:22:27

Tha-Fox
Member
Registered: 2010-11-25
Posts: 20
Website

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

I've been postponing the PHP 7 -> 8 upgrade. Today I saw new version for nextcloud and decided to do the upgrade. I got it working in four hours and I want to thank especially williamvds for your instructions regarding the php-fpm pool. I just followed those instructions and wiki: https://wiki.archlinux.org/index.php/Ne … 3E=_21.0.0

Here is what I had to do in case it helps someone else. My environment consists of nginx and php-fpm.

1) After upgrading the packages I had the original nextcloud config in /etc/webapps/nextcloud/config/config.php. The new one was in the same directory as config.php.pacnew. I backed up the original and then added the "apps_paths" section and "logfile" line from .pacnew to the original config.php. I also replaced the "datadirectory" line in config.php with the one from config.php.pacnew.
2) I copied all the files in original data directory to the new one:

cp -ar /usr/share/webapps/nextcloud/data/* /var/lib/nextcloud/data/

3) Change the ownership for the new nextcloud user:

chown -R nextcloud:nextcloud /var/lib/nextcloud/data/

4) Create the new file /etc/php/php-fpm.d/nextcloud.conf as instructed below by williamvds. I also modified my Nextcloud's nginx config file /etc/nginx/nextcloud.conf, where I had to change it to use new pool socket.
5) Restart php-fpm and nginx.
6) Open nextcloud in browser and run the upgrade wizard that appeared.

Offline

#43 2021-02-22 06:20:48

str0gg
Member
Registered: 2012-12-01
Posts: 57
Website

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

@williamvds
Yes I tried this with out success then I've pointed tmpdir to location owned by nextcloud and still no success.

Offline

#44 2021-02-22 12:10:18

miro279
Member
Registered: 2010-10-02
Posts: 150

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

I now tried to follow all directions to update with the new nextcloud user.
Changes apps and data directory to /var/lib/nextcloud, both belongin to user nextcloud. I added the nextcloud pool for php-fpm and changed the nginx configuration acordingly. Overrides for php-fpm.service are also set.
Still I get the error that config is not writable when trying to update.
I don't really understand how config.php should be managed now in this scenario. It is in /etc/webapps/nextcloud now belonging to nextcloud:nextcloud. Still there is a config.php in /usr/share/webapps/nexcloud/config/, if I delete it, it is recreated when I try to open the webpage.. I now symlinked /etc/webapps/nextcloud/config.php to /usr/share/webapps/nextcloud/config/ but I guess its not the supposed way.
Help is appreciated ;-)

Offline

#45 2021-02-22 17:09:13

kde35
Member
Registered: 2015-04-13
Posts: 65

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

Personally I managed to make Nextcloud "run" (I had to "undelete" the overwritten config file, but as I have /usr directory under separate partition, this was not too difficult), however, I ran into  this bug/

Offline

#46 2021-02-22 19:33:58

Wandinstallation
Member
Registered: 2021-02-22
Posts: 4

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

So, here I am, having a hard time with this as well. I assumed that it is better to reply to this topic rather than open a new one. Installed version is 21.0.07, which I upgraded directly from the 20.x version.

I tried to follow all the suggestions made in the wiki to get a new running setup with the separate nextcloud user and all. The one problem that I'm facing is that when I want to upgrade the installation using

/usr/bin/runuser -u nextcloud -- /usr/bin/php /usr/bin/occ upgrade

will paste the content of the occ wrapper in /usr/bin without #!/usr/bin/env bash

Executing 

/usr/bin/runuser -u nextcloud -- /usr/bin/php /usr/share/webapps/nextcloud/occ upgrade

returns

Could not open input file: /usr/share/webapps/nextcloud/occ

The file is definitely there:

-rwxr-xr-x 1 root root 283 Feb 21 18:56 occ

Changing the user to root

/usr/bin/runuser -u root -- /usr/bin/php /usr/bin/occ upgrade

will paste again the content of the occ wrapper in /usr/bin

Correspondingly:

/usr/bin/runuser -u root -- /usr/bin/php /usr/share/webapps/nextcloud/occ upgrade
An unhandled exception has been thrown:
ParseError: syntax error, unexpected token "=>" in /etc/webapps/nextcloud/config/config.php:27
Stack trace:
#0 /usr/share/webapps/nextcloud/lib/private/Config.php(68): OC\Config->readData()
#1 /usr/share/webapps/nextcloud/lib/base.php(149): OC\Config->__construct('/usr/share/weba...')
#2 /usr/share/webapps/nextcloud/lib/base.php(569): OC::initPaths()
#3 /usr/share/webapps/nextcloud/lib/base.php(1076): OC::init()
#4 /usr/share/webapps/nextcloud/console.php(49): require_once('/usr/share/weba...')
#5 /usr/share/webapps/nextcloud/occ(11): require_once('/usr/share/weba...')
#6 {main}

The reference to line 27 in config.php belongs to the new "Writable apps directory" section in the nextcloud wiki (I replaced the square brackets from the wiki with parenthesis to match the current format of the config.php, if it matters):

'apps_paths' => (
        (
                'path'=> '/usr/share/webapps/nextcloud/apps',
                'url' => '/apps',
                'writable' => false,
        ),
        (
                'path'=> '/var/lib/nextcloud/apps',
                'url' => '/wapps',
                'writable' => true,
        ),
),

I am slightly confused. Can somebody give me a hint where the problem may be hidden? Thanks a lot!

Last edited by Wandinstallation (2021-02-22 19:35:58)

Offline

#47 2021-02-22 19:38:42

Schrekkorr
Member
Registered: 2021-02-22
Posts: 3

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

Wandinstallation wrote:

I tried to follow all the suggestions made in the wiki to get a new running setup with the separate nextcloud user and all. The one problem that I'm facing is that when I want to upgrade the installation using

/usr/bin/runuser -u nextcloud -- /usr/bin/php /usr/bin/occ upgrade

will paste the content of the occ wrapper in /usr/bin without #!/usr/bin/env bash

Executing 

/usr/bin/runuser -u nextcloud -- /usr/bin/php /usr/share/webapps/nextcloud/occ upgrade

returns

Could not open input file: /usr/share/webapps/nextcloud/occ

The file is definitely there:

-rwxr-xr-x 1 root root 283 Feb 21 18:56 occ

Try

sudo occ upgrade

Offline

#48 2021-02-22 19:41:12

Schrekkorr
Member
Registered: 2021-02-22
Posts: 3

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

miro279 wrote:

I now tried to follow all directions to update with the new nextcloud user.
Changes apps and data directory to /var/lib/nextcloud, both belongin to user nextcloud. I added the nextcloud pool for php-fpm and changed the nginx configuration acordingly. Overrides for php-fpm.service are also set.
Still I get the error that config is not writable when trying to update.
I don't really understand how config.php should be managed now in this scenario. It is in /etc/webapps/nextcloud now belonging to nextcloud:nextcloud. Still there is a config.php in /usr/share/webapps/nexcloud/config/, if I delete it, it is recreated when I try to open the webpage.. I now symlinked /etc/webapps/nextcloud/config.php to /usr/share/webapps/nextcloud/config/ but I guess its not the supposed way.
Help is appreciated ;-)

There is a symlink from /usr/share/webapps/nextcloud/config/ to  /etc/webapps/nextcloud/config/

I got the "config is not writable" error when I tried to use the /usr/share/webapps/nextcloud/occ command. If I do it

 sudo occ 

the error vanishes.

Offline

#49 2021-02-22 19:43:41

Schrekkorr
Member
Registered: 2021-02-22
Posts: 3

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

I have the same issue here. Did you get any further? There is also an issue on github: https://github.com/nextcloud/server/issues/25746

miro279 wrote:

I could start the update process, but it fails with an unhandled exception:

Starting code integrity check...
An unhandled exception has been thrown:
TypeError: decbin(): Argument #1 ($num) must be of type int, float given in /usr/share/webapps/nextcloud/3rdparty/phpseclib/phpseclib/phpseclib/Math/BigInteger.php:662
Stack trace:
#0 /usr/share/webapps/nextcloud/3rdparty/phpseclib/phpseclib/phpseclib/Math/BigInteger.php(662): decbin()
#1 /usr/share/webapps/nextcloud/3rdparty/phpseclib/phpseclib/phpseclib/Crypt/RSA.php(2848): phpseclib\Math\BigInteger->toBits()
#2 /usr/share/webapps/nextcloud/3rdparty/phpseclib/phpseclib/phpseclib/Crypt/RSA.php(3177): phpseclib\Crypt\RSA->_rsassa_pss_verify()
#3 /usr/share/webapps/nextcloud/lib/private/IntegrityCheck/Checker.php(371): phpseclib\Crypt\RSA->verify()
#4 /usr/share/webapps/nextcloud/lib/private/IntegrityCheck/Checker.php(571): OC\IntegrityCheck\Checker->verify()
#5 /usr/share/webapps/nextcloud/lib/private/IntegrityCheck/Checker.php(592): OC\IntegrityCheck\Checker->verifyCoreSignature()
#6 /usr/share/webapps/nextcloud/lib/private/Updater.php(288): OC\IntegrityCheck\Checker->runInstanceVerification()
#7 /usr/share/webapps/nextcloud/lib/private/Updater.php(132): OC\Updater->doUpgrade()
#8 /usr/share/webapps/nextcloud/core/Command/Upgrade.php(255): OC\Updater->upgrade()
#9 /usr/share/webapps/nextcloud/3rdparty/symfony/console/Command/Command.php(255): OC\Core\Command\Upgrade->execute()
#10 /usr/share/webapps/nextcloud/3rdparty/symfony/console/Application.php(1009): Symfony\Component\Console\Command\Command->run()
#11 /usr/share/webapps/nextcloud/3rdparty/symfony/console/Application.php(273): Symfony\Component\Console\Application->doRunCommand()
#12 /usr/share/webapps/nextcloud/3rdparty/symfony/console/Application.php(149): Symfony\Component\Console\Application->doRun()
#13 /usr/share/webapps/nextcloud/lib/private/Console/Application.php(215): Symfony\Component\Console\Application->run()
#14 /usr/share/webapps/nextcloud/console.php(100): OC\Console\Application->run()
#15 /usr/share/webapps/nextcloud/occ(11): require_once('...')
#16 {main}

Offline

#50 2021-02-22 19:47:30

Wandinstallation
Member
Registered: 2021-02-22
Posts: 4

Re: Nextcloud 21.0.0.2-21.0.0.9 sevral issues, index in first post

Schrekkorr wrote:
Wandinstallation wrote:

I tried to follow all the suggestions made in the wiki to get a new running setup with the separate nextcloud user and all. The one problem that I'm facing is that when I want to upgrade the installation using

/usr/bin/runuser -u nextcloud -- /usr/bin/php /usr/bin/occ upgrade

will paste the content of the occ wrapper in /usr/bin without #!/usr/bin/env bash

Executing 

/usr/bin/runuser -u nextcloud -- /usr/bin/php /usr/share/webapps/nextcloud/occ upgrade

returns

Could not open input file: /usr/share/webapps/nextcloud/occ

The file is definitely there:

-rwxr-xr-x 1 root root 283 Feb 21 18:56 occ

Try

sudo occ upgrade

Unfortunately, this doesn't help:

[root@server bin]# occ upgrade
Could not open input file: /usr/share/webapps/nextcloud/occ

I tried it as root, sudoing as the non-root user, both in the webapps/nextcloud folder and in /usr/bin

Offline

Board footer

Powered by FluxBB