You are not logged in.

#1 2021-02-23 17:54:17

othersamo_
Member
From: Braislava
Registered: 2020-10-26
Posts: 52

[SOLVED] missing error message

Hello,
i was checking journalctl today for errors, and I was told (here on the forums) that "errors" like

Feb 23 18:42:55 Samo-PCTP lightdm[484]: gkr-pam: unable to locate daemon control file

are not serious, however, this time an error without further explanation arrived: https://ctrlv.link/BUdT (link to a screenshot).

I actually tried to find if there are some "errors without actually showing the error message", but no success. All I found were some kernel errors, but none of them has similar behaviour than this one.

I tried restarting the computer, but each time during the boot, this shows up.

Does anyone know what may be wrong?

Last edited by othersamo_ (2021-02-27 11:59:43)


"Why join the navy if you can be a pirate?"
- Steve Jobs

Offline

#2 2021-02-23 18:08:17

Head_on_a_Stick
Member
From: London
Registered: 2014-02-20
Posts: 5,723
Website

Re: [SOLVED] missing error message

It's always best to enter the error message into a search engine: https://bbs.archlinux.org/viewtopic.php?id=244965

Offline

#3 2021-02-23 18:10:15

loqs
Member
Registered: 2014-03-06
Posts: 12,987

Re: [SOLVED] missing error message

Offline

#4 2021-02-23 18:10:43

tucuxi
Member
From: Switzerland
Registered: 2020-03-08
Posts: 75

Re: [SOLVED] missing error message

Apparently, this is the normal behavior although it remains unclear why a warning is produced if everything goes normally. I'd say that my system feels a lot cleaner since I got rid of lightdm (and login managers in general) and gnome-key-ring.

Offline

#5 2021-02-23 18:13:29

othersamo_
Member
From: Braislava
Registered: 2020-10-26
Posts: 52

Re: [SOLVED] missing error message

Head_on_a_Stick wrote:

It's always best to enter the error message into a search engine: https://bbs.archlinux.org/viewtopic.php?id=244965

The unable to locate daemon control file is not the important one, now the one that matters is the kernel one - the one which has no error message after it, just ":" and blank space...

Last edited by othersamo_ (2021-02-23 18:14:20)


"Why join the navy if you can be a pirate?"
- Steve Jobs

Offline

#6 2021-02-23 18:43:43

othersamo_
Member
From: Braislava
Registered: 2020-10-26
Posts: 52

Re: [SOLVED] missing error message

UPDATE: The empty error started showing after the last update.


"Why join the navy if you can be a pirate?"
- Steve Jobs

Offline

#7 2021-02-23 18:44:28

loqs
Member
Registered: 2014-03-06
Posts: 12,987

Re: [SOLVED] missing error message

othersamo_ wrote:

UPDATE: The empty error started showing after the last update.

Which contained,  what?

Offline

#8 2021-02-23 18:51:34

othersamo_
Member
From: Braislava
Registered: 2020-10-26
Posts: 52

Re: [SOLVED] missing error message

loqs wrote:
othersamo_ wrote:

UPDATE: The empty error started showing after the last update.

Which contained,  what?

It used to contain "bad value for hidepid" which again, was considered as an unimportant error, now it has nothing.
Bad value for hidepid? https://github.com/systemd/systemd/issues/16896


"Why join the navy if you can be a pirate?"
- Steve Jobs

Offline

#9 2021-02-23 18:52:59

tucuxi
Member
From: Switzerland
Registered: 2020-03-08
Posts: 75

Re: [SOLVED] missing error message

Please show us the complete log.

Offline

#10 2021-02-23 18:55:27

othersamo_
Member
From: Braislava
Registered: 2020-10-26
Posts: 52

Re: [SOLVED] missing error message

tucuxi wrote:

Please show us the complete log.

Feb 17 08:44:27 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 17 08:44:29 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 17 08:44:32 Samo-PCTP lightdm[491]: gkr-pam: unable to locate daemon control file
Feb 17 08:48:19 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 17 10:45:44 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 17 11:56:43 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 17 11:57:53 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 17 11:59:04 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 17 12:02:22 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 17 12:04:29 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 17 12:07:04 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 17 12:12:06 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 17 12:20:53 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 17 12:24:35 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 17 22:09:58 Samo-PCTP pulseaudio[1951]: Error opening PCM device front:0: No such file or directory
Feb 17 22:09:58 Samo-PCTP pulseaudio[1951]: Error opening PCM device front:0: No such file or directory
-- Boot 6c27695f073549d9b9a1e481dd4e3a28 --
Feb 18 08:35:04 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 18 08:35:06 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 18 08:35:16 Samo-PCTP lightdm[503]: gkr-pam: unable to locate daemon control file
Feb 18 12:25:20 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 18 12:26:08 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 18 12:48:35 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 18 20:08:50 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 18 20:10:57 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 18 20:12:37 Samo-PCTP kernel: proc: Bad value for 'hidepid'
-- Boot 734764d3f3494b32aa244cba30c2a6fc --
Feb 19 08:40:17 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 19 08:40:19 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 19 08:40:32 Samo-PCTP lightdm[526]: gkr-pam: unable to locate daemon control file
Feb 19 10:11:58 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 19 18:47:30 Samo-PCTP kernel: proc: Bad value for 'hidepid'
-- Boot a32361f6d1294fd2807316f077ec0629 --
Feb 20 10:37:21 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 20 10:37:23 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 20 10:37:30 Samo-PCTP lightdm[504]: gkr-pam: unable to locate daemon control file
-- Boot 3dc4d176e90b4e4992f6b4bdab33fdd2 --
Feb 21 12:29:00 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 21 12:29:02 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 21 12:29:09 Samo-PCTP lightdm[512]: gkr-pam: unable to locate daemon control file
Feb 21 17:00:31 Samo-PCTP kernel: proc: Bad value for 'hidepid'
Feb 21 17:54:52 Samo-PCTP kernel: proc: Bad value for 'hidepid'

result of journalctl -p 3

Result of today's journalctl -p 3 -xb:

Feb 23 18:42:48 Samo-PCTP kernel: 
Feb 23 18:42:55 Samo-PCTP lightdm[484]: gkr-pam: unable to locate daemon control file

"Why join the navy if you can be a pirate?"
- Steve Jobs

Offline

#11 2021-02-23 18:59:27

loqs
Member
Registered: 2014-03-06
Posts: 12,987

Re: [SOLVED] missing error message

othersamo_ wrote:
loqs wrote:
othersamo_ wrote:

UPDATE: The empty error started showing after the last update.

Which contained,  what?

It used to contain "bad value for hidepid" which again, was considered as an unimportant error, now it has nothing.
Bad value for hidepid? https://github.com/systemd/systemd/issues/16896

I meant what packages were contained in that update?  Please also include their old versions and new versions.

Offline

#12 2021-02-23 19:04:03

othersamo_
Member
From: Braislava
Registered: 2020-10-26
Posts: 52

Re: [SOLVED] missing error message

loqs wrote:
othersamo_ wrote:
loqs wrote:

Which contained,  what?

It used to contain "bad value for hidepid" which again, was considered as an unimportant error, now it has nothing.
Bad value for hidepid? https://github.com/systemd/systemd/issues/16896

I meant what packages were contained in that update?  Please also include their old versions and new versions.

Is there any way I I can show you e.g. a of this? If it is logged somewhere, may you tell me where because all I can tell is that there was a Linux-LTS update. to version 5.10.17-1.
^^ I tried finding errors/bugs in that version, no success.


"Why join the navy if you can be a pirate?"
- Steve Jobs

Offline

#13 2021-02-23 19:13:32

loqs
Member
Registered: 2014-03-06
Posts: 12,987

Re: [SOLVED] missing error message

othersamo_ wrote:

Is there any way I I can show you e.g. a of this? If it is logged somewhere, may you tell me where because all I can tell is that there was a Linux-LTS update. to version 5.10.17-1.
^^ I tried finding errors/bugs in that version, no success.

/var/log/pacman.log contains all pacman operations.  If you post all of it I will search through it or search backward for the previous linux-lts version.
If you missed the 5.10.16 update so linux-lts went from 5.4.98 to 5.10.17 that big update would seem more likely to introduce such a change than from 5.10.16 to 5.10.17.

Offline

#14 2021-02-23 19:17:21

othersamo_
Member
From: Braislava
Registered: 2020-10-26
Posts: 52

Re: [SOLVED] missing error message

loqs wrote:
othersamo_ wrote:

Is there any way I I can show you e.g. a of this? If it is logged somewhere, may you tell me where because all I can tell is that there was a Linux-LTS update. to version 5.10.17-1.
^^ I tried finding errors/bugs in that version, no success.

/var/log/pacman.log contains all pacman operations.  If you post all of it I will search through it or search backward for the previous linux-lts version.
If you missed the 5.10.16 update so linux-lts went from 5.4.98 to 5.10.17 that big update would seem more likely to introduce such a change than from 5.10.16 to 5.10.17.

Here you go:
[2021-02-23T17:33:11+0100] [ALPM] upgraded linux-lts (5.4.97-1 -> 5.10.17-1)

pacman log from today's update

[2021-02-23T17:29:03+0100] [PACMAN] Running 'pacman -S -y -u --config /etc/pacman.conf --'
[2021-02-23T17:29:03+0100] [PACMAN] synchronizing package lists
[2021-02-23T17:29:10+0100] [PACMAN] starting full system upgrade
[2021-02-23T17:33:07+0100] [ALPM] running '60-mkinitcpio-remove.hook'...
[2021-02-23T17:33:07+0100] [ALPM] transaction started
[2021-02-23T17:33:08+0100] [ALPM] upgraded glibc (2.33-3 -> 2.33-4)
[2021-02-23T17:33:08+0100] [ALPM-SCRIPTLET] Generating locales...
[2021-02-23T17:33:09+0100] [ALPM-SCRIPTLET]   en_GB.UTF-8... done
[2021-02-23T17:33:09+0100] [ALPM-SCRIPTLET] Generation complete.
[2021-02-23T17:33:09+0100] [ALPM] upgraded openssl (1.1.1.i-2 -> 1.1.1.j-1)
[2021-02-23T17:33:09+0100] [ALPM] upgraded util-linux-libs (2.36.1-4 -> 2.36.2-1)
[2021-02-23T17:33:09+0100] [ALPM] upgraded libgcrypt (1.9.1-1 -> 1.9.2-1)
[2021-02-23T17:33:09+0100] [ALPM] upgraded ca-certificates-mozilla (3.61-1 -> 3.62-1)
[2021-02-23T17:33:09+0100] [ALPM] upgraded libelf (0.182-1 -> 0.183-3)
[2021-02-23T17:33:09+0100] [ALPM] upgraded nettle (3.7-1 -> 3.7.1-1)
[2021-02-23T17:33:09+0100] [ALPM] upgraded elfutils (0.182-1 -> 0.183-3)
[2021-02-23T17:33:10+0100] [ALPM] upgraded binutils (2.36-3 -> 2.36.1-2)
[2021-02-23T17:33:10+0100] [ALPM] upgraded bluez (5.55-2 -> 5.55-3)
[2021-02-23T17:33:10+0100] [ALPM] upgraded util-linux (2.36.1-4 -> 2.36.2-1)
[2021-02-23T17:33:10+0100] [ALPM] upgraded kbd (2.3.0-2 -> 2.4.0-2)
[2021-02-23T17:33:10+0100] [ALPM] upgraded bluez-utils (5.55-2 -> 5.55-3)
[2021-02-23T17:33:10+0100] [ALPM] upgraded fakeroot (1.25.3-1 -> 1.25.3-2)
[2021-02-23T17:33:10+0100] [ALPM] upgraded llvm-libs (11.0.1-2 -> 11.1.0-1)
[2021-02-23T17:33:10+0100] [ALPM] upgraded lm_sensors (3.6.0-2 -> 1:3.6.0.r41.g31d1f125-1)
[2021-02-23T17:33:10+0100] [ALPM] upgraded vulkan-icd-loader (1.2.166-1 -> 1.2.169-1)
[2021-02-23T17:33:10+0100] [ALPM] upgraded xkeyboard-config (2.31-1 -> 2.32-1)
[2021-02-23T17:33:10+0100] [ALPM] upgraded mesa (20.3.4-1 -> 20.3.4-2)
[2021-02-23T17:33:10+0100] [ALPM] upgraded tar (1.33-1 -> 1.34-1)
[2021-02-23T17:33:10+0100] [ALPM] upgraded gtk3 (1:3.24.25-1 -> 1:3.24.25-2)
[2021-02-23T17:33:10+0100] [ALPM] upgraded intel-ucode (20201118-1 -> 20210216-1)
[2021-02-23T17:33:10+0100] [ALPM] upgraded jasper (2.0.24-1 -> 2.0.25-1)
[2021-02-23T17:33:10+0100] [ALPM] upgraded libbytesize (2.4-4 -> 2.5-1)
[2021-02-23T17:33:10+0100] [ALPM] upgraded libgexiv2 (0.12.1-4 -> 0.12.2-1)
[2021-02-23T17:33:11+0100] [ALPM] upgraded libibus (1.5.23+3+gaa558de8-3 -> 1.5.24-1)
[2021-02-23T17:33:11+0100] [ALPM] upgraded mkinitcpio (29-1 -> 30-1)
[2021-02-23T17:33:11+0100] [ALPM] upgraded linux-lts (5.4.97-1 -> 5.10.17-1)
[2021-02-23T17:33:11+0100] [ALPM] upgraded nss (3.61-1 -> 3.62-1)
[2021-02-23T17:33:11+0100] [ALPM] upgraded nvidia-lts (1:460.39-7 -> 1:460.39-11)
[2021-02-23T17:33:11+0100] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2021-02-23T17:33:11+0100] [ALPM] upgraded pacman-mirrorlist (20210206-1 -> 20210214-1)
[2021-02-23T17:33:12+0100] [ALPM] upgraded perl (5.32.0-3 -> 5.32.1-1)
[2021-02-23T17:33:12+0100] [ALPM] upgraded procps-ng (3.3.16-3 -> 3.3.17-1)
[2021-02-23T17:33:12+0100] [ALPM] upgraded taglib (1.11.1-4 -> 1.12-1)
[2021-02-23T17:33:12+0100] [ALPM] upgraded vivaldi (3.6.2165.36-1 -> 3.6.2165.40-1)
[2021-02-23T17:33:12+0100] [ALPM] upgraded vte-common (0.62.2-1 -> 0.62.3-1)
[2021-02-23T17:33:12+0100] [ALPM] upgraded vte3 (0.62.2-1 -> 0.62.3-1)
[2021-02-23T17:33:12+0100] [ALPM] upgraded xfce4-cpugraph-plugin (1.2.1-1 -> 1.2.2-1)
[2021-02-23T17:33:12+0100] [ALPM] transaction completed
[2021-02-23T17:33:13+0100] [ALPM] running '20-systemd-sysusers.hook'...
[2021-02-23T17:33:13+0100] [ALPM] running '30-systemd-daemon-reload.hook'...
[2021-02-23T17:33:13+0100] [ALPM] running '30-systemd-tmpfiles.hook'...
[2021-02-23T17:33:13+0100] [ALPM] running '30-systemd-udev-reload.hook'...
[2021-02-23T17:33:13+0100] [ALPM] running '30-systemd-update.hook'...
[2021-02-23T17:33:13+0100] [ALPM] running '40-update-ca-trust.hook'...
[2021-02-23T17:33:13+0100] [ALPM] running '60-depmod.hook'...
[2021-02-23T17:33:21+0100] [ALPM] running '90-mkinitcpio-install.hook'...
[2021-02-23T17:33:21+0100] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'default'
[2021-02-23T17:33:21+0100] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts.img
[2021-02-23T17:33:21+0100] [ALPM-SCRIPTLET] ==> Starting build: 5.10.17-1-lts
[2021-02-23T17:33:21+0100] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2021-02-23T17:33:21+0100] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2021-02-23T17:33:21+0100] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2021-02-23T17:33:21+0100] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2021-02-23T17:33:21+0100] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2021-02-23T17:33:21+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: xhci_pci
[2021-02-23T17:33:22+0100] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2021-02-23T17:33:22+0100] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2021-02-23T17:33:22+0100] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2021-02-23T17:33:22+0100] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2021-02-23T17:33:22+0100] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-lts.img
[2021-02-23T17:33:22+0100] [ALPM-SCRIPTLET] ==> Image generation successful
[2021-02-23T17:33:22+0100] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'fallback'
[2021-02-23T17:33:22+0100] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts-fallback.img -S autodetect
[2021-02-23T17:33:22+0100] [ALPM-SCRIPTLET] ==> Starting build: 5.10.17-1-lts
[2021-02-23T17:33:22+0100] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2021-02-23T17:33:22+0100] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2021-02-23T17:33:23+0100] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2021-02-23T17:33:23+0100] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2021-02-23T17:33:24+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: wd719x
[2021-02-23T17:33:24+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2021-02-23T17:33:25+0100] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: xhci_pci
[2021-02-23T17:33:26+0100] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2021-02-23T17:33:27+0100] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2021-02-23T17:33:27+0100] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2021-02-23T17:33:29+0100] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2021-02-23T17:33:29+0100] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-lts-fallback.img
[2021-02-23T17:33:29+0100] [ALPM-SCRIPTLET] ==> Image generation successful
[2021-02-23T17:33:29+0100] [ALPM] running 'dbus-reload.hook'...
[2021-02-23T17:33:29+0100] [ALPM] running 'detect-old-perl-modules.hook'...
[2021-02-23T17:33:29+0100] [ALPM] running 'glib-compile-schemas.hook'...
[2021-02-23T17:33:29+0100] [ALPM] running 'gtk-query-immodules-3.0.hook'...
[2021-02-23T17:33:29+0100] [ALPM] running 'gtk-update-icon-cache.hook'...
[2021-02-23T17:33:29+0100] [ALPM] running 'texinfo-install.hook'...
[2021-02-23T17:33:31+0100] [ALPM] running 'update-desktop-database.hook'...
[2021-02-23T17:35:05+0100] [PACMAN] Running 'pacman -U --noconfirm --config /etc/pacman.conf -- /home/samo/.cache/yay/brave-bin/brave-bin-1:1.20.108-1-x86_64.pkg.tar.zst'
[2021-02-23T17:35:05+0100] [ALPM] transaction started
[2021-02-23T17:35:06+0100] [ALPM] upgraded brave-bin (1:1.20.103-1 -> 1:1.20.108-1)
[2021-02-23T17:35:06+0100] [ALPM] transaction completed
[2021-02-23T17:35:06+0100] [ALPM] running '30-systemd-update.hook'...
[2021-02-23T17:35:06+0100] [ALPM] running 'update-desktop-database.hook'...
[2021-02-23T17:39:12+0100] [PACMAN] Running 'pacman -Syu'
[2021-02-23T17:39:12+0100] [PACMAN] synchronizing package lists
[2021-02-23T17:39:12+0100] [PACMAN] starting full system upgrade

Last edited by othersamo_ (2021-02-23 19:22:24)


"Why join the navy if you can be a pirate?"
- Steve Jobs

Offline

#15 2021-02-23 19:52:44

loqs
Member
Registered: 2014-03-06
Posts: 12,987

Re: [SOLVED] missing error message

Please try adding the following to kernel parameters from the boot loader:

module_blacklist=nvidia,nvidia_drm,nvidia_modeset systemd.unit=multi-user.target

That will stop the nvidia modules loading and boot the system to multi-user.target.  You can then reboot to get the GUI back and check if the blank message appeared in the previous boot.

Offline

#16 2021-02-24 09:47:40

othersamo_
Member
From: Braislava
Registered: 2020-10-26
Posts: 52

Re: [SOLVED] missing error message

loqs wrote:

Please try adding the following to kernel parameters from the boot loader:

module_blacklist=nvidia,nvidia_drm,nvidia_modeset systemd.unit=multi-user.target

That will stop the nvidia modules loading and boot the system to multi-user.target.  You can then reboot to get the GUI back and check if the blank message appeared in the previous boot.

right, thank you, will do it as soon as I get on my computer.
By the time can I ask if the lie does any important modifications and can cause problems?


"Why join the navy if you can be a pirate?"
- Steve Jobs

Offline

#17 2021-02-24 14:51:06

loqs
Member
Registered: 2014-03-06
Posts: 12,987

Re: [SOLVED] missing error message

othersamo_ wrote:
loqs wrote:

That will stop the nvidia modules loading and boot the system to multi-user.target

...
By the time can I ask if the lie does any important modifications and can cause problems?

Booting to multi-user.target should stop the GUI loading if it started by a display manager.  If X is started automatically at console login it will probably fail due to the missing nvidia modules.
All the changes are limited to that boot and will not persist beyond that.

Last edited by loqs (2021-02-24 14:51:28)

Offline

#18 2021-02-24 17:35:07

othersamo_
Member
From: Braislava
Registered: 2020-10-26
Posts: 52

Re: [SOLVED] missing error message

loqs wrote:
othersamo_ wrote:
loqs wrote:

That will stop the nvidia modules loading and boot the system to multi-user.target

...
By the time can I ask if the lie does any important modifications and can cause problems?

Booting to multi-user.target should stop the GUI loading if it started by a display manager.  If X is started automatically at console login it will probably fail due to the missing nvidia modules.
All the changes are limited to that boot and will not persist beyond that.

The problem is, however, that i have 2nd intel graphics card which may actually do the GUI stuff.


"Why join the navy if you can be a pirate?"
- Steve Jobs

Offline

#19 2021-02-24 17:55:02

loqs
Member
Registered: 2014-03-06
Posts: 12,987

Re: [SOLVED] missing error message

As long as the nvidia modules are not loaded for that boot that is enough to test if they are the cause even if the GUI fails.  After you reboot the system will be restored to its previous state and you can check the journal.

Offline

#20 2021-02-25 12:00:34

othersamo_
Member
From: Braislava
Registered: 2020-10-26
Posts: 52

Re: [SOLVED] missing error message

loqs wrote:

As long as the nvidia modules are not loaded for that boot that is enough to test if they are the cause even if the GUI fails.  After you reboot the system will be restored to its previous state and you can check the journal.

Okay, I tried so, when got back to my system with GUI boot (this time), the blank message did not appear. However, instead of it, this happened:

Bluetooth: hci0: Reading supported features failed (-16)

This happened after booting instead of the blank message, kernel error, as well.


"Why join the navy if you can be a pirate?"
- Steve Jobs

Offline

#21 2021-02-25 23:21:26

loqs
Member
Registered: 2014-03-06
Posts: 12,987

Re: [SOLVED] missing error message

I am not familiar with Bluetooth so I do not know if it could be related to blacklisting the nvidia modules.

It would appear the nvidia module is at least needed to produce the message.
Apart the message have you noticed any other issues with 5.11?

Offline

#22 2021-02-26 07:13:22

seth
Member
Registered: 2012-09-03
Posts: 18,895

Re: [SOLVED] missing error message

The only way I see the nvidia kernel module being connected to a usb communication error (assuming that the BT is on the USB which is common) is a race condition.
Please stop posting random error messages out of context, post the entire system journal.
Out of context, we can only tell *what* that error says, but not why it's there or whether it's relevant for anything (eg. bluetoothd could just knock the device until it responds)

Offline

#23 2021-02-26 07:44:48

othersamo_
Member
From: Braislava
Registered: 2020-10-26
Posts: 52

Re: [SOLVED] missing error message

Today's journal:

Feb 26 08:35:14 Samo-PCTP kernel: Bluetooth: hci0: Reading supported features failed (-16)
Feb 26 08:35:18 Samo-PCTP lightdm[476]: gkr-pam: unable to locate daemon control file


Here is the journal (journalctl -p 3):

-- Journal begins at Tue 2021-02-23 08:37:08 CET, ends at Fri 2021-02-26 08:36:>
Feb 23 18:38:58 Samo-PCTP sudo[86678]: pam_unix(sudo:auth): conversation failed
Feb 23 18:38:58 Samo-PCTP sudo[86678]: pam_unix(sudo:auth): auth could not iden>
Feb 23 18:38:58 Samo-PCTP sudo[86679]: pam_unix(sudo:auth): conversation failed
Feb 23 18:38:58 Samo-PCTP sudo[86679]: pam_unix(sudo:auth): auth could not iden>
Feb 23 18:39:48 Samo-PCTP sudo[86796]: pam_unix(sudo:auth): conversation failed
Feb 23 18:39:48 Samo-PCTP sudo[86796]: pam_unix(sudo:auth): auth could not iden>
Feb 23 18:39:48 Samo-PCTP sudo[86797]: pam_unix(sudo:auth): conversation failed
Feb 23 18:39:48 Samo-PCTP sudo[86797]: pam_unix(sudo:auth): auth could not iden>
Feb 23 18:40:01 Samo-PCTP pulseaudio[923]: Error opening PCM device front:0: No>
Feb 23 18:40:01 Samo-PCTP pulseaudio[923]: Error opening PCM device front:0: No>
-- Boot b73eedfc3ed945d8a4e0626d6bc11c2d --
Feb 23 21:29:14 Samo-PCTP kernel: watchdog: watchdog0: watchdog did not stop!
-- Boot 05f9b55affa046bba393ec4b4183dbb6 --
Feb 23 21:29:43 Samo-PCTP kernel: 
Feb 23 21:29:48 Samo-PCTP lightdm[484]: gkr-pam: unable to locate daemon contro>
-- Boot a7b22908acb849aca9623afa782c634f --
Feb 24 08:33:25 Samo-PCTP kernel: 
Feb 24 08:33:28 Samo-PCTP kernel: Bluetooth: hci0: Reading supported features f>
-- Boot dffe029c17ec46bd9bd8f0bc84934cb2 --
Feb 24 08:34:21 Samo-PCTP kernel: 
Feb 24 08:34:24 Samo-PCTP kernel: Bluetooth: hci0: Reading supported features f>
-- Boot d3113379b25c4214b3fc9353c43cf219 --
lines 1-23...skipping...
-- Journal begins at Tue 2021-02-23 08:37:08 CET, ends at Fri 2021-02-26 08:36:06 CET. --
Feb 23 18:38:58 Samo-PCTP sudo[86678]: pam_unix(sudo:auth): conversation failed
Feb 23 18:38:58 Samo-PCTP sudo[86678]: pam_unix(sudo:auth): auth could not identify password for [samo]
Feb 23 18:38:58 Samo-PCTP sudo[86679]: pam_unix(sudo:auth): conversation failed
Feb 23 18:38:58 Samo-PCTP sudo[86679]: pam_unix(sudo:auth): auth could not identify password for [samo]
Feb 23 18:39:48 Samo-PCTP sudo[86796]: pam_unix(sudo:auth): conversation failed
Feb 23 18:39:48 Samo-PCTP sudo[86796]: pam_unix(sudo:auth): auth could not identify password for [samo]
Feb 23 18:39:48 Samo-PCTP sudo[86797]: pam_unix(sudo:auth): conversation failed
Feb 23 18:39:48 Samo-PCTP sudo[86797]: pam_unix(sudo:auth): auth could not identify password for [samo]
Feb 23 18:40:01 Samo-PCTP pulseaudio[923]: Error opening PCM device front:0: No such file or directory
Feb 23 18:40:01 Samo-PCTP pulseaudio[923]: Error opening PCM device front:0: No such file or directory
-- Boot b73eedfc3ed945d8a4e0626d6bc11c2d --
Feb 23 21:29:14 Samo-PCTP kernel: watchdog: watchdog0: watchdog did not stop!
-- Boot 05f9b55affa046bba393ec4b4183dbb6 --
Feb 23 21:29:43 Samo-PCTP kernel: 
Feb 23 21:29:48 Samo-PCTP lightdm[484]: gkr-pam: unable to locate daemon control file
-- Boot a7b22908acb849aca9623afa782c634f --
Feb 24 08:33:25 Samo-PCTP kernel: 
Feb 24 08:33:28 Samo-PCTP kernel: Bluetooth: hci0: Reading supported features failed (-16)
-- Boot dffe029c17ec46bd9bd8f0bc84934cb2 --
Feb 24 08:34:21 Samo-PCTP kernel: 
Feb 24 08:34:24 Samo-PCTP kernel: Bluetooth: hci0: Reading supported features failed (-16)
-- Boot d3113379b25c4214b3fc9353c43cf219 --
Feb 24 08:35:41 Samo-PCTP kernel: 
Feb 24 08:35:42 Samo-PCTP kernel: Bluetooth: hci0: Reading supported features failed (-16)
Feb 24 08:35:52 Samo-PCTP lightdm[488]: gkr-pam: unable to locate daemon control file
Feb 24 08:38:37 Samo-PCTP pulseaudio[1419]: Error opening PCM device front:0: No such file or directory
Feb 24 08:38:37 Samo-PCTP pulseaudio[1419]: Error opening PCM device front:0: No such file or directory
Feb 24 08:38:39 Samo-PCTP kernel: watchdog: watchdog0: watchdog did not stop!
-- Boot 8c9108b22cfe4285936a380fc2d6026f --
Feb 24 08:39:06 Samo-PCTP kernel: 
Feb 24 08:39:13 Samo-PCTP lightdm[487]: gkr-pam: unable to locate daemon control file
Feb 24 19:19:28 Samo-PCTP pulseaudio[1446]: Error opening PCM device front:0: No such file or directory
Feb 24 19:19:28 Samo-PCTP pulseaudio[1446]: Error opening PCM device front:0: No such file or directory
Feb 24 19:19:39 Samo-PCTP lightdm[87146]: gkr-pam: unable to locate daemon control file
Feb 24 19:21:22 Samo-PCTP lightdm[87522]: gkr-pam: unable to locate daemon control file
Feb 24 21:56:52 Samo-PCTP pulseaudio[88513]: Error opening PCM device front:0: No such file or directory
Feb 24 21:56:52 Samo-PCTP pulseaudio[88513]: Error opening PCM device front:0: No such file or directory
-- Boot 4663f558705048669290867d9a41a8af --
Feb 25 08:30:52 Samo-PCTP kernel: Bluetooth: hci0: Reading supported features failed (-16)
Feb 25 08:31:03 Samo-PCTP lightdm[484]: gkr-pam: unable to locate daemon control file
Feb 25 10:35:54 Samo-PCTP kernel: watchdog: watchdog0: watchdog did not stop!
-- Boot 25614154899b4d34a3e35c08c4e6f944 --
Feb 25 10:37:25 Samo-PCTP kernel: Bluetooth: hci0: Reading supported features failed (-16)

The error with bluetooth started appearing after latest ekrnel update.

You can also see the error when executing

 dmesg 

.

[    0.009915] ACPI: SSDT 0x0000000057FFB000 0003A2 (v02 LENOVO TcgTable 00001000 INTL 20141107)
[    0.009918] ACPI: UEFI 0x0000000057FA1000 000042 (v01 LENOVO TP-N1E   00001620 PTEC 00000002)
[    0.009921] ACPI: SSDT 0x0000000057FF5000 0051BC (v02 LENOVO SaSsdt   00003000 INTL 20141107)
[    0.009924] ACPI: SSDT 0x0000000057FF4000 0005C5 (v02 LENOVO PerfTune 00001000 INTL 20141107)
[    0.009927] ACPI: ECDT 0x0000000057FF2000 000052 (v01 LENOVO TP-N1E   00001620 PTEC 00000002)
[    0.009930] ACPI: HPET 0x0000000057FF1000 000038 (v01 LENOVO TP-N1E   00001620 PTEC 00000002)
[    0.009933] ACPI: APIC 0x0000000057FF0000 0000BC (v03 LENOVO TP-N1E   00001620 PTEC 00000002)
[    0.009936] ACPI: MCFG 0x0000000057FEF000 00003C (v01 LENOVO TP-N1E   00001620 PTEC 00000002)
[    0.009939] ACPI: SSDT 0x0000000057FD9000 0016CA (v01 LENOVO SataAhci 00001000 INTL 20141107)
[    0.009942] ACPI: DBGP 0x0000000057FD8000 000034 (v01 LENOVO TP-N1E   00001620 PTEC 00000002)
[    0.009945] ACPI: DBG2 0x0000000057FD7000 000054 (v00 LENOVO TP-N1E   00001620 PTEC 00000002)
[    0.009948] ACPI: BOOT 0x0000000057FD6000 000028 (v01 LENOVO TP-N1E   00001620 PTEC 00000002)
[    0.009951] ACPI: BATB 0x0000000057FD5000 00004A (v02 LENOVO TP-N1E   00001620 PTEC 00000002)
[    0.009954] ACPI: SLIC 0x0000000057FD4000 000176 (v01 LENOVO TP-N1E   00001620 PTEC 00000002)
[    0.009957] ACPI: SSDT 0x0000000057FD3000 000E73 (v02 LENOVO CpuSsdt  00003000 INTL 20141107)
[    0.009960] ACPI: SSDT 0x0000000057FD2000 000403 (v02 LENOVO CtdpB    00001000 INTL 20141107)
[    0.009963] ACPI: MSDM 0x0000000057FD1000 000055 (v03 LENOVO TP-N1E   00001620 PTEC 00000002)
[    0.009966] ACPI: SSDT 0x0000000057FD0000 000FAB (v01 LENOVO NvOptTbl 00001000 INTL 20141107)
[    0.009969] ACPI: SSDT 0x0000000057FCF000 00006C (v02 LENOVO SgPeg    00001000 INTL 20141107)
[    0.009972] ACPI: DMAR 0x0000000057FFD000 0000A8 (v01 LENOVO TP-N1E   00001620 PTEC 00000002)
[    0.009975] ACPI: ASF! 0x0000000057FCD000 0000A5 (v32 LENOVO TP-N1E   00001620 PTEC 00000002)
[    0.009978] ACPI: FPDT 0x0000000057FCC000 000044 (v01 LENOVO TP-N1E   00001620 PTEC 00000002)
[    0.009981] ACPI: UEFI 0x0000000057F5C000 00013E (v01 LENOVO TP-N1E   00001620 PTEC 00000002)
[    0.009988] ACPI: Local APIC address 0xfee00000
[    0.010074] No NUMA configuration found
[    0.010075] Faking a node at [mem 0x0000000000000000-0x000000049f7fffff]
[    0.010078] NODE_DATA(0) allocated [mem 0x49f7fc000-0x49f7fffff]
[    0.030792] Zone ranges:
[    0.030793]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.030795]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.030796]   Normal   [mem 0x0000000100000000-0x000000049f7fffff]
[    0.030797]   Device   empty
[    0.030798] Movable zone start for each node
[    0.030799] Early memory node ranges
[    0.030800]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.030801]   node   0: [mem 0x0000000000100000-0x0000000038f47fff]
[    0.030802]   node   0: [mem 0x0000000100000000-0x000000049f7fffff]
[    0.031080] Zeroed struct page in unavailable ranges: 31004 pages
[    0.031081] Initmem setup node 0 [mem 0x0000000000001000-0x000000049f7fffff]
[    0.031083] On node 0 totalpages: 4032228
[    0.031084]   DMA zone: 64 pages used for memmap
[    0.031085]   DMA zone: 21 pages reserved
[    0.031086]   DMA zone: 3996 pages, LIFO batch:0
[    0.031106]   DMA32 zone: 3582 pages used for memmap
[    0.031107]   DMA32 zone: 229192 pages, LIFO batch:63
[    0.032255]   Normal zone: 59360 pages used for memmap
[    0.032256]   Normal zone: 3799040 pages, LIFO batch:63
[    0.052934] Reserving Intel graphics memory at [mem 0x5a800000-0x5e7fffff]
[    0.053284] ACPI: PM-Timer IO Port: 0x1808
[    0.053286] ACPI: Local APIC address 0xfee00000
[    0.053292] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.053292] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.053293] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.053294] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.053295] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.053295] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.053296] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.053297] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.053323] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.053325] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.053326] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.053328] ACPI: IRQ0 used by override.
[    0.053329] ACPI: IRQ9 used by override.
[    0.053331] Using ACPI (MADT) for SMP configuration information
[    0.053332] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.053335] TSC deadline timer available
[    0.053336] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.053352] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.053353] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.053354] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.053355] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.053356] PM: hibernation: Registered nosave memory: [mem 0x38f48000-0x4bde7fff]
[    0.053357] PM: hibernation: Registered nosave memory: [mem 0x4bde8000-0x4bde8fff]
[    0.053358] PM: hibernation: Registered nosave memory: [mem 0x4bde9000-0x57f29fff]
[    0.053358] PM: hibernation: Registered nosave memory: [mem 0x57f2a000-0x57fbefff]
[    0.053359] PM: hibernation: Registered nosave memory: [mem 0x57fbf000-0x57ffefff]
[    0.053360] PM: hibernation: Registered nosave memory: [mem 0x57fff000-0x580fffff]
[    0.053360] PM: hibernation: Registered nosave memory: [mem 0x58100000-0x585fffff]
[    0.053361] PM: hibernation: Registered nosave memory: [mem 0x58600000-0x5e7fffff]
[    0.053362] PM: hibernation: Registered nosave memory: [mem 0x5e800000-0xdfffffff]
[    0.053362] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.053363] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[    0.053364] PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[    0.053364] PM: hibernation: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
[    0.053365] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.053366] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.053366] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.053367] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[    0.053368] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.053368] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[    0.053369] PM: hibernation: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[    0.053370] PM: hibernation: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[    0.053370] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.053371] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[    0.053372] PM: hibernation: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.053373] [mem 0x5e800000-0xdfffffff] available for PCI devices
[    0.053374] Booting paravirtualized kernel on bare hardware
[    0.053377] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.058408] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.058563] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144
[    0.058569] pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152
[    0.058570] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.058591] Built 1 zonelists, mobility grouping on.  Total pages: 3969201
[    0.058591] Policy zone: Normal
[    0.058593] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=a264c5a0-23e3-4127-97ba-db852d76d3c5 rw loglevel=3 quiet
[    0.059376] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.059744] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.059815] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[    0.093324] Memory: 15732028K/16128912K available (14344K kernel code, 2030K rwdata, 8812K rodata, 1776K init, 4284K bss, 396624K reserved, 0K cma-reserved)
[    0.093331] random: get_random_u64 called from __kmem_cache_create+0x26/0x520 with crng_init=0
[    0.093456] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.093467] Kernel/User page tables isolation: enabled
[    0.093486] ftrace: allocating 41646 entries in 163 pages
[    0.107409] ftrace: allocated 163 pages with 4 groups
[    0.107502] rcu: Hierarchical RCU implementation.
[    0.107504] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.107505] 	Rude variant of Tasks RCU enabled.
[    0.107505] 	Tracing variant of Tasks RCU enabled.
[    0.107506] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.107507] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.111076] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[    0.111533] Console: colour dummy device 80x25
[    0.111546] printk: console [tty0] enabled
[    0.111564] ACPI: Core revision 20200925
[    0.111797] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.111862] APIC: Switch to symmetric I/O mode setup
[    0.111864] DMAR: Host address width 39
[    0.111865] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.111870] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[    0.111871] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.111874] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.111875] DMAR: RMRR base: 0x0000005749f000 end: 0x000000574befff
[    0.111876] DMAR: RMRR base: 0x0000005a000000 end: 0x0000005e7fffff
[    0.111878] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.111879] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.111880] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.111880] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.113358] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.113359] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.117318] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.162063] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26eae8729ef, max_idle_ns: 440795235156 ns
[    0.162067] Calibrating delay loop (skipped), value calculated using timer frequency.. 5399.81 BogoMIPS (lpj=26999090)
[    0.162070] pid_max: default: 32768 minimum: 301
[    0.162101] LSM: Security Framework initializing
[    0.162106] Yama: becoming mindful.
[    0.162111] LSM support for eBPF active
[    0.162155] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.162177] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.162430] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.162450] process: using mwait in idle threads
[    0.162453] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.162453] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.162456] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.162457] Spectre V2 : Mitigation: Full generic retpoline
[    0.162457] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.162458] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.162459] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.162460] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.162461] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.162463] TAA: Mitigation: Clear CPU buffers
[    0.162465] SRBDS: Mitigation: Microcode
[    0.162466] MDS: Mitigation: Clear CPU buffers
[    0.162698] Freeing SMP alternatives memory: 36K
[    0.171170] smpboot: CPU0: Intel(R) Core(TM) i7-6820HQ CPU @ 2.70GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.171271] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.171282] ... version:                4
[    0.171283] ... bit width:              48
[    0.171283] ... generic registers:      4
[    0.171284] ... value mask:             0000ffffffffffff
[    0.171285] ... max period:             00007fffffffffff
[    0.171285] ... fixed-purpose events:   3
[    0.171286] ... event mask:             000000070000000f
[    0.171388] rcu: Hierarchical SRCU implementation.
[    0.172065] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.172065] smp: Bringing up secondary CPUs ...
[    0.172065] x86: Booting SMP configuration:
[    0.172065] .... node  #0, CPUs:      #1 #2 #3 #4
[    0.172065] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.172065] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details.
[    0.172065]  #5 #6 #7
[    0.172620] smp: Brought up 1 node, 8 CPUs
[    0.172620] smpboot: Max logical packages: 1
[    0.172620] smpboot: Total of 8 processors activated (43198.54 BogoMIPS)
[    0.174714] devtmpfs: initialized
[    0.174714] x86/mm: Memory block size: 128MB
[    0.174714] PM: Registering ACPI NVS region [mem 0x4bde8000-0x4bde8fff] (4096 bytes)
[    0.174714] PM: Registering ACPI NVS region [mem 0x57f2a000-0x57fbefff] (610304 bytes)
[    0.174714] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.174714] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.174714] pinctrl core: initialized pinctrl subsystem
[    0.174714] PM: RTC time: 07:35:08, date: 2021-02-26
[    0.174714] NET: Registered protocol family 16
[    0.174714] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.174714] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.174714] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.174714] audit: initializing netlink subsys (disabled)
[    0.174714] audit: type=2000 audit(1614324908.070:1): state=initialized audit_enabled=0 res=1
[    0.174714] thermal_sys: Registered thermal governor 'fair_share'
[    0.174714] thermal_sys: Registered thermal governor 'bang_bang'
[    0.174714] thermal_sys: Registered thermal governor 'step_wise'
[    0.174714] thermal_sys: Registered thermal governor 'user_space'
[    0.174714] thermal_sys: Registered thermal governor 'power_allocator'
[    0.174714] cpuidle: using governor ladder
[    0.174714] cpuidle: using governor menu
[    0.174714] Simple Boot Flag at 0x47 set to 0x1
[    0.174714] ACPI: bus type PCI registered
[    0.174714] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.174714] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.174714] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.174714] PCI: Using configuration type 1 for base access
[    0.174714] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.174714] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.174714] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.174714] ACPI: Added _OSI(Module Device)
[    0.174714] ACPI: Added _OSI(Processor Device)
[    0.174714] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.174714] ACPI: Added _OSI(Processor Aggregator Device)
[    0.174714] ACPI: Added _OSI(Linux-Dell-Video)
[    0.174714] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.174714] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.210340] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.211403] ACPI: EC: EC started
[    0.211404] ACPI: EC: interrupt blocked
[    0.212844] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.212845] ACPI: EC: Boot ECDT EC used to handle transactions
[    0.213422] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.219792] ACPI: Dynamic OEM Table Load:
[    0.219803] ACPI: SSDT 0xFFFF9FDF80C24000 00066A (v02 PmRef  Cpu0Ist  00003000 INTL 20141107)
[    0.221098] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.222039] ACPI: Dynamic OEM Table Load:
[    0.222047] ACPI: SSDT 0xFFFF9FDF8108C400 0003CF (v02 PmRef  Cpu0Cst  00003001 INTL 20141107)
[    0.223241] ACPI: Dynamic OEM Table Load:
[    0.223247] ACPI: SSDT 0xFFFF9FDF81155C00 00008E (v02 PmRef  Cpu0Hwp  00003000 INTL 20141107)
[    0.224297] ACPI: Dynamic OEM Table Load:
[    0.224302] ACPI: SSDT 0xFFFF9FDF81087A00 000130 (v02 PmRef  HwpLvt   00003000 INTL 20141107)
[    0.225929] ACPI: Dynamic OEM Table Load:
[    0.225936] ACPI: SSDT 0xFFFF9FDF80C23000 0005AA (v02 PmRef  ApIst    00003000 INTL 20141107)
[    0.227458] ACPI: Dynamic OEM Table Load:
[    0.227464] ACPI: SSDT 0xFFFF9FDF81085A00 000119 (v02 PmRef  ApHwp    00003000 INTL 20141107)
[    0.228620] ACPI: Dynamic OEM Table Load:
[    0.228625] ACPI: SSDT 0xFFFF9FDF81086200 000119 (v02 PmRef  ApCst    00003000 INTL 20141107)
[    0.233490] ACPI: Interpreter enabled
[    0.233537] ACPI: (supports S0 S3 S4 S5)
[    0.233540] ACPI: Using IOAPIC for interrupt routing
[    0.233567] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.233856] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.237123] ACPI: Power Resource [PUBS] (on)
[    0.237405] ACPI: Power Resource [PG00] (on)
[    0.282402] ACPI: Power Resource [PG01] (on)
[    0.282510] ACPI: Power Resource [PG02] (on)
[    0.288514] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.288617] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11)
[    0.288719] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[    0.288820] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    0.288921] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.289022] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[    0.289114] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.289218] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[    0.289324] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-5f])
[    0.289328] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.289450] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    0.289568] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC]
[    0.290380] PCI host bridge to bus 0000:00
[    0.290382] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.290383] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.290384] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.290386] pci_bus 0000:00: root bus resource [mem 0x5e800000-0xfebfffff window]
[    0.290387] pci_bus 0000:00: root bus resource [bus 00-5f]
[    0.290399] pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
[    0.290787] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.290831] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.291341] pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
[    0.291350] pci 0000:00:02.0: reg 0x10: [mem 0xc2000000-0xc2ffffff 64bit]
[    0.291355] pci 0000:00:02.0: reg 0x18: [mem 0x60000000-0x6fffffff 64bit pref]
[    0.291359] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.291851] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.291867] pci 0000:00:14.0: reg 0x10: [mem 0xc5920000-0xc592ffff 64bit]
[    0.291931] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.292324] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    0.292340] pci 0000:00:14.2: reg 0x10: [mem 0xc594a000-0xc594afff 64bit]
[    0.292781] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.292799] pci 0000:00:16.0: reg 0x10: [mem 0xc594b000-0xc594bfff 64bit]
[    0.292866] pci 0000:00:16.0: PME# supported from D3hot
[    0.293244] pci 0000:00:16.3: [8086:a13d] type 00 class 0x070002
[    0.293256] pci 0000:00:16.3: reg 0x10: [io  0x5080-0x5087]
[    0.293263] pci 0000:00:16.3: reg 0x14: [mem 0xc594f000-0xc594ffff]
[    0.293693] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[    0.293705] pci 0000:00:17.0: reg 0x10: [mem 0xc5948000-0xc5949fff]
[    0.293714] pci 0000:00:17.0: reg 0x14: [mem 0xc594e000-0xc594e0ff]
[    0.293722] pci 0000:00:17.0: reg 0x18: [io  0x5088-0x508f]
[    0.293730] pci 0000:00:17.0: reg 0x1c: [io  0x5090-0x5093]
[    0.293739] pci 0000:00:17.0: reg 0x20: [io  0x5060-0x507f]
[    0.293747] pci 0000:00:17.0: reg 0x24: [mem 0xc594c000-0xc594c7ff]
[    0.293787] pci 0000:00:17.0: PME# supported from D3hot
[    0.294310] pci 0000:00:1b.0: [8086:a167] type 01 class 0x060400
[    0.294386] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.294895] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[    0.294973] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.295461] pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
[    0.295537] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.296022] pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400
[    0.296097] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.296593] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[    0.296669] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.297159] pci 0000:00:1d.4: [8086:a11c] type 01 class 0x060400
[    0.297228] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
[    0.297715] pci 0000:00:1f.0: [8086:a150] type 00 class 0x060100
[    0.298323] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.298337] pci 0000:00:1f.2: reg 0x10: [mem 0xc5944000-0xc5947fff]
[    0.298893] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    0.298914] pci 0000:00:1f.3: reg 0x10: [mem 0xc5940000-0xc5943fff 64bit]
[    0.298945] pci 0000:00:1f.3: reg 0x20: [mem 0xc5930000-0xc593ffff 64bit]
[    0.298993] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.299383] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.299439] pci 0000:00:1f.4: reg 0x10: [mem 0xc594d000-0xc594d0ff 64bit]
[    0.299508] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.300093] pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000
[    0.300112] pci 0000:00:1f.6: reg 0x10: [mem 0xc5900000-0xc591ffff]
[    0.300218] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.300778] pci 0000:01:00.0: [10de:13b1] type 00 class 0x030000
[    0.300795] pci 0000:01:00.0: reg 0x10: [mem 0xc3000000-0xc3ffffff]
[    0.300810] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.300823] pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
[    0.300832] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.300840] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.300864] pci 0000:01:00.0: Enabling HDA controller
[    0.301184] pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300
[    0.301202] pci 0000:01:00.1: reg 0x10: [mem 0xc4000000-0xc4003fff]
[    0.301391] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.301393] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.301395] pci 0000:00:01.0:   bridge window [mem 0xc3000000-0xc40fffff]
[    0.301398] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.301539] pci 0000:02:00.0: [144d:a808] type 00 class 0x010802
[    0.301558] pci 0000:02:00.0: reg 0x10: [mem 0xc5800000-0xc5803fff 64bit]
[    0.301873] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    0.301877] pci 0000:00:1b.0:   bridge window [mem 0xc5800000-0xc58fffff]
[    0.301923] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.301926] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.301928] pci 0000:00:1c.0:   bridge window [mem 0xc4e00000-0xc57fffff]
[    0.301932] pci 0000:00:1c.0:   bridge window [mem 0xc4100000-0xc4afffff 64bit pref]
[    0.302152] pci 0000:04:00.0: [8086:24f3] type 00 class 0x028000
[    0.302234] pci 0000:04:00.0: reg 0x10: [mem 0xc4d00000-0xc4d01fff 64bit]
[    0.302527] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.303133] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.303137] pci 0000:00:1c.2:   bridge window [mem 0xc4d00000-0xc4dfffff]
[    0.303188] pci 0000:00:1c.4: PCI bridge to [bus 05-3d]
[    0.303192] pci 0000:00:1c.4:   bridge window [mem 0x94000000-0xaa0fffff]
[    0.303196] pci 0000:00:1c.4:   bridge window [mem 0x70000000-0x91ffffff 64bit pref]
[    0.303334] pci 0000:3e:00.0: [144d:a808] type 00 class 0x010802
[    0.303352] pci 0000:3e:00.0: reg 0x10: [mem 0xc4c00000-0xc4c03fff 64bit]
[    0.303599] pci 0000:00:1d.0: PCI bridge to [bus 3e]
[    0.303603] pci 0000:00:1d.0:   bridge window [mem 0xc4c00000-0xc4cfffff]
[    0.303667] pci 0000:3f:00.0: [10ec:525a] type 00 class 0xff0000
[    0.303695] pci 0000:3f:00.0: reg 0x14: [mem 0xc4b00000-0xc4b00fff]
[    0.303818] pci 0000:3f:00.0: supports D1 D2
[    0.303819] pci 0000:3f:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.303970] pci 0000:00:1d.4: PCI bridge to [bus 3f]
[    0.303973] pci 0000:00:1d.4:   bridge window [mem 0xc4b00000-0xc4bfffff]
[    0.305379] ACPI: EC: interrupt unblocked
[    0.305380] ACPI: EC: event unblocked
[    0.305390] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.305390] ACPI: EC: GPE=0x16
[    0.305392] ACPI: \_SB_.PCI0.LPC_.EC__: Boot ECDT EC initialization complete
[    0.305393] ACPI: \_SB_.PCI0.LPC_.EC__: EC: Used to handle transactions and events
[    0.305448] iommu: Default domain type: Translated 
[    0.305460] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.305460] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.305460] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.305460] pci 0000:00:02.0: vgaarb: no bridge control possible
[    0.305460] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.305460] vgaarb: loaded
[    0.305460] SCSI subsystem initialized
[    0.312076] libata version 3.00 loaded.
[    0.312078] ACPI: bus type USB registered
[    0.312087] usbcore: registered new interface driver usbfs
[    0.312091] usbcore: registered new interface driver hub
[    0.312097] usbcore: registered new device driver usb
[    0.312115] pps_core: LinuxPPS API ver. 1 registered
[    0.312116] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.312118] PTP clock support registered
[    0.312130] EDAC MC: Ver: 3.0.0
[    0.312653] NetLabel: Initializing
[    0.312653] NetLabel:  domain hash size = 128
[    0.312653] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.312653] NetLabel:  unlabeled traffic allowed by default
[    0.312653] PCI: Using ACPI for IRQ routing
[    0.332068] PCI: pci_cache_line_size set to 64 bytes
[    0.332068] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.332068] e820: reserve RAM buffer [mem 0x38f48000-0x3bffffff]
[    0.332068] e820: reserve RAM buffer [mem 0x49f800000-0x49fffffff]
[    0.332789] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.332794] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.333815] clocksource: Switched to clocksource tsc-early
[    0.342455] VFS: Disk quotas dquot_6.6.0
[    0.342469] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.342526] pnp: PnP ACPI init
[    0.343065] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.343067] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.343068] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.343069] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[    0.343070] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[    0.343071] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.343073] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[    0.343074] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[    0.343075] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[    0.343076] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.343077] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.343078] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.343079] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.343081] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.343082] system 00:00: [mem 0x00100000-0x5e7fffff] could not be reserved
[    0.343083] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.343084] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[    0.343089] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.343161] system 00:01: [io  0x1800-0x189f] has been reserved
[    0.343162] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.343164] system 00:01: [io  0x0880-0x08ff] has been reserved
[    0.343165] system 00:01: [io  0x0900-0x097f] has been reserved
[    0.343166] system 00:01: [io  0x0980-0x09ff] has been reserved
[    0.343167] system 00:01: [io  0x0a00-0x0a7f] has been reserved
[    0.343168] system 00:01: [io  0x0a80-0x0aff] has been reserved
[    0.343169] system 00:01: [io  0x0b00-0x0b7f] has been reserved
[    0.343170] system 00:01: [io  0x0b80-0x0bff] has been reserved
[    0.343172] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.343173] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.343174] system 00:01: [io  0x1640-0x165f] has been reserved
[    0.343176] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.343177] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.343178] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.343179] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.343180] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
[    0.343183] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.343257] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.343271] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[    0.343285] pnp 00:04: Plug and Play ACPI device, IDs LEN005b PNP0f13 (active)
[    0.344060] pnp 00:05: Plug and Play ACPI device, IDs PNP0c31 (active)
[    0.344110] pnp: PnP ACPI: found 6 devices
[    0.349654] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.349705] NET: Registered protocol family 2
[    0.349861] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.349935] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.350101] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.350168] TCP: Hash tables configured (established 131072 bind 65536)
[    0.350235] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.350319] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.350360] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.350419] NET: Registered protocol family 1
[    0.350423] NET: Registered protocol family 44
[    0.350427] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.350432] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 05-3d] add_size 1000
[    0.350440] pci 0000:00:1c.4: BAR 13: assigned [io  0x2000-0x2fff]
[    0.350443] pci 0000:01:00.0: BAR 6: assigned [mem 0xc4080000-0xc40fffff pref]
[    0.350444] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.350446] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.350449] pci 0000:00:01.0:   bridge window [mem 0xc3000000-0xc40fffff]
[    0.350451] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.350454] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    0.350459] pci 0000:00:1b.0:   bridge window [mem 0xc5800000-0xc58fffff]
[    0.350464] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.350466] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.350469] pci 0000:00:1c.0:   bridge window [mem 0xc4e00000-0xc57fffff]
[    0.350471] pci 0000:00:1c.0:   bridge window [mem 0xc4100000-0xc4afffff 64bit pref]
[    0.350476] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.350479] pci 0000:00:1c.2:   bridge window [mem 0xc4d00000-0xc4dfffff]
[    0.350484] pci 0000:00:1c.4: PCI bridge to [bus 05-3d]
[    0.350486] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.350489] pci 0000:00:1c.4:   bridge window [mem 0x94000000-0xaa0fffff]
[    0.350491] pci 0000:00:1c.4:   bridge window [mem 0x70000000-0x91ffffff 64bit pref]
[    0.350495] pci 0000:00:1d.0: PCI bridge to [bus 3e]
[    0.350500] pci 0000:00:1d.0:   bridge window [mem 0xc4c00000-0xc4cfffff]
[    0.350505] pci 0000:00:1d.4: PCI bridge to [bus 3f]
[    0.350508] pci 0000:00:1d.4:   bridge window [mem 0xc4b00000-0xc4bfffff]
[    0.350514] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.350515] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.350516] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.350517] pci_bus 0000:00: resource 7 [mem 0x5e800000-0xfebfffff window]
[    0.350518] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.350519] pci_bus 0000:01: resource 1 [mem 0xc3000000-0xc40fffff]
[    0.350520] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.350521] pci_bus 0000:02: resource 1 [mem 0xc5800000-0xc58fffff]
[    0.350523] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.350523] pci_bus 0000:03: resource 1 [mem 0xc4e00000-0xc57fffff]
[    0.350524] pci_bus 0000:03: resource 2 [mem 0xc4100000-0xc4afffff 64bit pref]
[    0.350526] pci_bus 0000:04: resource 1 [mem 0xc4d00000-0xc4dfffff]
[    0.350527] pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
[    0.350528] pci_bus 0000:05: resource 1 [mem 0x94000000-0xaa0fffff]
[    0.350529] pci_bus 0000:05: resource 2 [mem 0x70000000-0x91ffffff 64bit pref]
[    0.350530] pci_bus 0000:3e: resource 1 [mem 0xc4c00000-0xc4cfffff]
[    0.350531] pci_bus 0000:3f: resource 1 [mem 0xc4b00000-0xc4bfffff]
[    0.350628] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.350965] pci 0000:01:00.0: enabling device (0000 -> 0002)
[    0.351077] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.351530] PCI: CLS 0 bytes, default 64
[    0.351605] Trying to unpack rootfs image as initramfs...
[    0.409726] Freeing initrd memory: 11296K
[    0.409780] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.409782] software IO TLB: mapped [mem 0x00000000329df000-0x00000000369df000] (64MB)
[    0.410321] check: Scanning for low memory corruption every 60 seconds
[    0.410605] Initialise system trusted keyrings
[    0.410618] Key type blacklist registered
[    0.410658] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.411670] zbud: loaded
[    0.420673] Key type asymmetric registered
[    0.420674] Asymmetric key parser 'x509' registered
[    0.420679] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.420704] io scheduler mq-deadline registered
[    0.420704] io scheduler kyber registered
[    0.420724] io scheduler bfq registered
[    0.420803] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.421125] pcieport 0000:00:1b.0: AER: enabled with IRQ 123
[    0.421305] pcieport 0000:00:1c.0: AER: enabled with IRQ 124
[    0.421489] pcieport 0000:00:1c.2: AER: enabled with IRQ 125
[    0.421663] pcieport 0000:00:1c.4: AER: enabled with IRQ 126
[    0.421846] pcieport 0000:00:1d.0: AER: enabled with IRQ 127
[    0.422019] pcieport 0000:00:1d.4: AER: enabled with IRQ 128
[    0.422102] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.422126] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    0.422126] vesafb: scrolling: redraw
[    0.422127] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.422140] vesafb: framebuffer at 0x60000000, mapped to 0x00000000f8136b76, using 8128k, total 8128k
[    0.422166] fbcon: Deferring console take-over
[    0.422167] fb0: VESA VGA frame buffer device
[    0.422177] intel_idle: MWAIT substates: 0x11142120
[    0.422178] intel_idle: v0.5.1 model 0x5E
[    0.422573] intel_idle: Local APIC timer is reliable in all C-states
[    0.422974] ACPI: AC Adapter [AC] (on-line)
[    0.423022] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.423311] ACPI: Lid Switch [LID]
[    0.423344] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.423566] ACPI: Sleep Button [SLPB]
[    0.423612] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.423636] ACPI: Power Button [PWRF]
[    0.428370] thermal LNXTHERM:00: registered as thermal_zone0
[    0.428372] ACPI: Thermal Zone [THM0] (24 C)
[    0.428619] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.429037] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.431010] 0000:00:16.3: ttyS4 at I/O 0x5080 (irq = 19, base_baud = 115200) is a 16550A
[    0.431185] Non-volatile memory driver v1.3
[    0.431186] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.431187] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    0.434999] nvme nvme0: pci function 0000:02:00.0
[    0.435085] nvme nvme1: pci function 0000:3e:00.0
[    0.435114] ahci 0000:00:17.0: version 3.0
[    0.435522] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x0 impl SATA mode
[    0.435524] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst 
[    0.437309] scsi host0: ahci
[    0.438342] scsi host1: ahci
[    0.438376] ata1: DUMMY
[    0.438377] ata2: DUMMY
[    0.438403] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.438414] ehci-pci: EHCI PCI platform driver
[    0.438423] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.438424] ohci-pci: OHCI PCI platform driver
[    0.438431] uhci_hcd: USB Universal Host Controller Interface driver
[    0.438456] usbcore: registered new interface driver usbserial_generic
[    0.438459] usbserial: USB Serial support registered for generic
[    0.438478] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.440570] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.440574] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.440889] rtc_cmos 00:02: RTC can wake from S4
[    0.441479] rtc_cmos 00:02: registered as rtc0
[    0.441727] rtc_cmos 00:02: setting system clock to 2021-02-26T07:35:09 UTC (1614324909)
[    0.441738] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.441764] intel_pstate: Intel P-state driver initializing
[    0.443275] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.444652] intel_pstate: HWP enabled
[    0.444857] ledtrig-cpu: registered to indicate activity on CPUs
[    0.445026] hid: raw HID events driver (C) Jiri Kosina
[    0.445086] intel_pmc_core intel_pmc_core.0:  initialized
[    0.445109] drop_monitor: Initializing network drop monitor service
[    0.445153] Initializing XFRM netlink socket
[    0.445221] NET: Registered protocol family 10
[    0.451263] Segment Routing with IPv6
[    0.451264] RPL Segment Routing with IPv6
[    0.451278] NET: Registered protocol family 17
[    0.453039] microcode: sig=0x506e3, pf=0x20, revision=0xe2
[    0.453274] microcode: Microcode Update Driver: v2.2.
[    0.453277] IPI shorthand broadcast: enabled
[    0.453295] sched_clock: Marking stable (462162004, -9301736)->(469595527, -16735259)
[    0.453552] nvme nvme0: missing or invalid SUBNQN field.
[    0.453564] nvme nvme1: missing or invalid SUBNQN field.
[    0.453566] nvme nvme0: Shutdown timeout set to 8 seconds
[    0.453580] nvme nvme1: Shutdown timeout set to 8 seconds
[    0.453841] registered taskstats version 1
[    0.453850] Loading compiled-in X.509 certificates
[    0.455930] battery: ACPI: Battery Slot [BAT0] (battery present)
[    0.457621] Loaded X.509 cert 'Build time autogenerated kernel key: eca337545304b0c72f4274268649849f6bd9dd00'
[    0.457932] zswap: loaded using pool lz4/z3fold
[    0.458344] Key type ._fscrypt registered
[    0.458345] Key type .fscrypt registered
[    0.458345] Key type fscrypt-provisioning registered
[    0.459232] PM:   Magic number: 9:698:572
[    0.459388] RAS: Correctable Errors collector initialized.
[    0.465566] nvme nvme1: 8/0/0 default/read/poll queues
[    0.465603] nvme nvme0: 8/0/0 default/read/poll queues
[    0.467575]  nvme1n1: p1
[    0.469000] Freeing unused decrypted memory: 2036K
[    0.469234] Freeing unused kernel image (initmem) memory: 1776K
[    0.632324] Write protecting the kernel read-only data: 26624k
[    0.633559] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    0.634240] Freeing unused kernel image (rodata/data gap) memory: 1428K
[    0.687936] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.687939] rodata_test: all tests were successful
[    0.687940] x86/mm: Checking user space page tables
[    0.732713] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.732716] Run /init as init process
[    0.732717]   with arguments:
[    0.732717]     /init
[    0.732718]   with environment:
[    0.732718]     HOME=/
[    0.732719]     TERM=linux
[    0.732719]     BOOT_IMAGE=/boot/vmlinuz-linux-lts
[    0.743036] fbcon: Taking over console
[    0.743083] Console: switching to colour frame buffer device 240x67
[    0.926812] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.926819] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.927902] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[    0.927912] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.928054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    0.928056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.928057] usb usb1: Product: xHCI Host Controller
[    0.928058] usb usb1: Manufacturer: Linux 5.10.17-1-lts xhci-hcd
[    0.928058] usb usb1: SerialNumber: 0000:00:14.0
[    0.928158] hub 1-0:1.0: USB hub found
[    0.928189] hub 1-0:1.0: 16 ports detected
[    0.930571] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.930579] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.930582] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    0.930655] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    0.930657] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.930659] usb usb2: Product: xHCI Host Controller
[    0.930660] usb usb2: Manufacturer: Linux 5.10.17-1-lts xhci-hcd
[    0.930662] usb usb2: SerialNumber: 0000:00:14.0
[    0.930754] hub 2-0:1.0: USB hub found
[    0.930767] hub 2-0:1.0: 10 ports detected
[    0.931897] usb: port power management may be unreliable
[    0.933517] random: fast init done
[    1.046240] EXT4-fs (nvme1n1p1): mounted filesystem with ordered data mode. Opts: (null)
[    1.165333] systemd[1]: systemd 247.3-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    1.202178] systemd[1]: Detected architecture x86-64.
[    1.277434] systemd[1]: Set hostname to <Samo-PCTP>.
[    1.282151] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.342406] random: lvmconfig: uninitialized urandom read (4 bytes read)
[    1.415521] systemd[1]: Queued start job for default target Graphical Interface.
[    1.422030] systemd[1]: Created slice system-getty.slice.
[    1.422290] systemd[1]: Created slice system-modprobe.slice.
[    1.422453] systemd[1]: Created slice User and Session Slice.
[    1.422495] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.422527] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.422614] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.422633] systemd[1]: Reached target Local Encrypted Volumes.
[    1.422641] systemd[1]: Reached target Login Prompts.
[    1.422656] systemd[1]: Reached target Paths.
[    1.422665] systemd[1]: Reached target Remote File Systems.
[    1.422671] systemd[1]: Reached target Slices.
[    1.422683] systemd[1]: Reached target Swap.
[    1.422730] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    1.422791] systemd[1]: Listening on LVM2 poll daemon socket.
[    1.423482] systemd[1]: Listening on Process Core Dump Socket.
[    1.423585] systemd[1]: Listening on Journal Audit Socket.
[    1.423647] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.423715] systemd[1]: Listening on Journal Socket.
[    1.423788] systemd[1]: Listening on udev Control Socket.
[    1.423845] systemd[1]: Listening on udev Kernel Socket.
[    1.424431] systemd[1]: Mounting Huge Pages File System...
[    1.425025] systemd[1]: Mounting POSIX Message Queue File System...
[    1.425651] systemd[1]: Mounting Kernel Debug File System...
[    1.426346] systemd[1]: Mounting Kernel Trace File System...
[    1.427082] systemd[1]: Mounting Temporary Directory (/tmp)...
[    1.427720] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    1.428392] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    1.428978] systemd[1]: Starting Load Kernel Module configfs...
[    1.429599] systemd[1]: Starting Load Kernel Module drm...
[    1.430205] systemd[1]: Starting Load Kernel Module fuse...
[    1.430585] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    1.430635] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    1.430839] random: lvm: uninitialized urandom read (4 bytes read)
[    1.431645] systemd[1]: Starting Journal Service...
[    1.432853] systemd[1]: Starting Load Kernel Modules...
[    1.433665] systemd[1]: Starting Remount Root and Kernel File Systems...
[    1.433719] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[    1.434585] systemd[1]: Starting Coldplug All udev Devices...
[    1.436140] Linux agpgart interface v0.103
[    1.436324] systemd[1]: Mounted Huge Pages File System.
[    1.436428] systemd[1]: Mounted POSIX Message Queue File System.
[    1.436504] systemd[1]: Mounted Kernel Debug File System.
[    1.436585] systemd[1]: Mounted Kernel Trace File System.
[    1.436666] systemd[1]: Mounted Temporary Directory (/tmp).
[    1.437120] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    1.437397] systemd[1]: modprobe@configfs.service: Succeeded.
[    1.437764] systemd[1]: Finished Load Kernel Module configfs.
[    1.438760] systemd[1]: Mounting Kernel Configuration File System...
[    1.439375] EXT4-fs (nvme1n1p1): re-mounted. Opts: (null)
[    1.440228] systemd[1]: Finished Remount Root and Kernel File Systems.
[    1.440348] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    1.440590] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    1.441185] systemd[1]: Starting Load/Save Random Seed...
[    1.441249] systemd[1]: Condition check resulted in Create System Users being skipped.
[    1.442046] systemd[1]: Starting Create Static Device Nodes in /dev...
[    1.443309] systemd[1]: Finished Load Kernel Modules.
[    1.443449] systemd[1]: Mounted Kernel Configuration File System.
[    1.444293] systemd[1]: Starting Apply Kernel Variables...
[    1.444312] fuse: init (API version 7.32)
[    1.444961] systemd[1]: modprobe@fuse.service: Succeeded.
[    1.445415] systemd[1]: Finished Load Kernel Module fuse.
[    1.446572] systemd[1]: Mounting FUSE Control File System...
[    1.448385] systemd[1]: Mounted FUSE Control File System.
[    1.451220] systemd[1]: Finished Apply Kernel Variables.
[    1.452085] tsc: Refined TSC clocksource calibration: 2712.008 MHz
[    1.452090] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27178e04de3, max_idle_ns: 440795318971 ns
[    1.452109] clocksource: Switched to clocksource tsc
[    1.461442] systemd[1]: Finished Create Static Device Nodes in /dev.
[    1.461480] audit: type=1130 audit(1614324910.510:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.462129] audit: type=1334 audit(1614324910.510:3): prog-id=13 op=LOAD
[    1.462165] audit: type=1334 audit(1614324910.510:4): prog-id=14 op=LOAD
[    1.462535] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    1.468121] systemd[1]: modprobe@drm.service: Succeeded.
[    1.468483] systemd[1]: Finished Load Kernel Module drm.
[    1.468575] audit: type=1130 audit(1614324910.510:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.468577] audit: type=1131 audit(1614324910.510:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.483169] usb 1-1: New USB device found, idVendor=05e3, idProduct=0606, bcdDevice= 7.02
[    1.483172] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.483174] usb 1-1: Product: USB2.0 Hub
[    1.483788] hub 1-1:1.0: USB hub found
[    1.484021] hub 1-1:1.0: 4 ports detected
[    1.494510] systemd[1]: Started Journal Service.
[    1.494606] audit: type=1130 audit(1614324910.540:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.498754] systemd-journald[225]: Received client request to flush runtime journal.
[    1.500329] audit: type=1130 audit(1614324910.540:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.507915] audit: type=1130 audit(1614324910.550:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.527901] audit: type=1130 audit(1614324910.570:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.567524] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    1.567586] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    1.578414] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[    1.578416] thinkpad_acpi: http://ibm-acpi.sf.net/
[    1.578417] thinkpad_acpi: ThinkPad BIOS N1EET89W (1.62 ), EC N1EHT38W
[    1.578418] thinkpad_acpi: Lenovo ThinkPad P50, model 20EQS2AA2X
[    1.579710] thinkpad_acpi: radio switch found; radios are enabled
[    1.579887] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    1.579888] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    1.583320] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    1.589785] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    1.589847] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    1.591101] tpm_tis 00:05: 1.2 TPM (device-id 0x1B, rev-id 16)
[    1.591475] i2c i2c-0: 2/4 memory slots populated (from DMI)
[    1.591820] i2c i2c-0: Successfully instantiated SPD at 0x50
[    1.592946] i2c i2c-0: Successfully instantiated SPD at 0x52
[    1.608817] thinkpad_acpi: secondary fan control enabled
[    1.611815] thinkpad_acpi: battery 1 registered (start 0, stop 100)
[    1.611844] battery: new extension: ThinkPad Battery Extension
[    1.612132] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[    1.642084] usb 1-2: new low-speed USB device number 3 using xhci_hcd
[    1.712557] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    1.713525] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    1.716899] e1000e: Intel(R) PRO/1000 Network Driver
[    1.716900] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.717028] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.717288] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff]
[    1.717295] caller snb_uncore_imc_init_box+0x82/0xd0 [intel_uncore] mapping multiple BARs
[    1.730405] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    1.737797] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    1.737799] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    1.737800] RAPL PMU: hw unit of domain package 2^-14 Joules
[    1.737801] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    1.737802] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    1.737803] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    1.742353] cryptd: max_cpu_qlen set to 1000
[    1.754640] AVX2 version of gcm_enc/dec engaged.
[    1.754642] AES CTR mode by8 optimization enabled
[    1.772524] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    1.772958] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    1.772960] cfg80211: failed to load regulatory.db
[    1.813755] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[    1.827838] usb 1-2: New USB device found, idVendor=13ba, idProduct=0018, bcdDevice= 0.01
[    1.827840] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.827842] usb 1-2: Product: Barcode Reader 
[    1.919123] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[    1.932107] usb 1-1.4: new full-speed USB device number 4 using xhci_hcd
[    1.995372] mmc0: new high speed SD card at address b368
[    1.999133] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) c8:5b:76:d9:29:6c
[    1.999135] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    1.999238] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: 1000FF-0FF
[    2.075398] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11
[    2.075400] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.075401] usb 1-1.4: Product: USB Receiver
[    2.075401] usb 1-1.4: Manufacturer: Logitech
[    2.212435] iTCO_vendor_support: vendor-support=0
[    2.214844] mmcblk0: mmc0:b368 SD    971 MiB 
[    2.215971] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[    2.217075] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[    2.217781] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.217843] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    2.217948] ee1004 0-0052: 512 byte EE1004-compliant SPD EEPROM, read-only
[    2.219360] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.220096] Intel(R) Wireless WiFi driver for Linux
[    2.222135] usb 1-8: new high-speed USB device number 5 using xhci_hcd
[    2.225648] iwlwifi 0000:04:00.0: loaded firmware version 36.ad812ee0.0 8000C-36.ucode op_mode iwlmvm
[    2.268683] checking generic (60000000 7f0000) vs hw (c2000000 1000000)
[    2.268686] checking generic (60000000 7f0000) vs hw (60000000 10000000)
[    2.268687] fb0: switching to inteldrmfb from VESA VGA
[    2.275792] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[    2.275837] snd_hda_intel 0000:01:00.1: Disabling MSI
[    2.275842] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    2.277606] Console: switching to colour dummy device 80x25
[    2.277643] i915 0000:00:02.0: vgaarb: deactivate vga console
[    2.279021] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    2.280454] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[    2.286929]  mmcblk0: p1
[    2.292985] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
[    2.293819] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    2.293862] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    2.294056] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[    2.296105] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.296360] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9
[    2.296547] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.297473] fbcon: i915drmfb (fb0) is primary device
[    2.297532] Console: switching to colour frame buffer device 240x67
[    2.297535] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    2.422253] usb 1-8: New USB device found, idVendor=04ca, idProduct=7058, bcdDevice= 0.13
[    2.422255] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.422256] usb 1-8: Product: Integrated Camera
[    2.422257] usb 1-8: Manufacturer: 8SSC20F26971L1GZ6BV0A4E
[    2.466443] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    2.466445] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.466446] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=2 (0x17/0x21/0x0/0x0/0x0)
[    2.466447] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    2.466447] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    2.466448] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    2.466449] snd_hda_codec_realtek hdaudioC0D0:      Dock Mic=0x19
[    2.466450] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    2.471189] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[    2.471260] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[    2.471323] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[    2.471386] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[    2.471433] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[    2.471483] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[    2.479291] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
[    2.506600] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4754]
[    2.536880] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1100..]
[    2.536885] psmouse serio1: synaptics: Trying to set up SMBus access
[    2.559310] iwlwifi 0000:04:00.0: base HW address: f4:8c:50:20:a1:93
[    2.592078] usb 1-9: new full-speed USB device number 6 using xhci_hcd
[    2.614899] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    2.614943] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    2.614983] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    2.615024] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    2.616412] rmi4_smbus 0-002c: registering SMbus-connected sensor
[    2.621695] intel_rapl_common: Found RAPL domain package
[    2.621696] intel_rapl_common: Found RAPL domain core
[    2.621697] intel_rapl_common: Found RAPL domain uncore
[    2.621698] intel_rapl_common: Found RAPL domain dram
[    2.621699] intel_rapl_common: Found RAPL domain psys
[    2.634098] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    2.634435] thermal thermal_zone3: failed to read out thermal zone (-61)
[    2.636213] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0
[    2.673177] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM3149-002, fw id: 2022239
[    2.733728] input: Synaptics TM3149-002 as /devices/rmi4-00/input/input20
[    2.739716] serio: RMI4 PS/2 pass-through port at rmi4-00.fn03
[    2.773943] nvidia: loading out-of-tree module taints kernel.
[    2.773953] nvidia: module license 'NVIDIA' taints kernel.
[    2.773954] Disabling lock debugging due to kernel taint
[    2.792347] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    2.792661] mousedev: PS/2 mouse device common for all mice
[    2.803919] usb 1-9: New USB device found, idVendor=138a, idProduct=0090, bcdDevice= 1.64
[    2.803921] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.803922] usb 1-9: SerialNumber: b90680b91495
[    2.807432] nvidia-nvlink: Nvlink Core is being initialized, major device number 234

[    2.807818] nvidia 0000:01:00.0: enabling device (0002 -> 0003)
[    2.807901] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[    2.924075] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  460.39  Thu Jan 21 21:54:06 UTC 2021
[    2.962083] usb 1-14: new full-speed USB device number 7 using xhci_hcd
[    3.033251] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  460.39  Thu Jan 21 21:49:04 UTC 2021
[    3.037048] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    3.037050] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[    3.100010] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    3.148980] input: TPPS/2 IBM TrackPoint as /devices/rmi4-00/rmi4-00.fn03/serio2/input/input21
[    3.163600] usb 1-14: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01
[    3.163602] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.214036] mc: Linux media interface: v0.10
[    3.214755] input: Barcode Reader  as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:13BA:0018.0001/input/input22
[    3.237207] videodev: Linux video capture interface: v2.00
[    3.263737] Bluetooth: Core ver 2.22
[    3.263756] NET: Registered protocol family 31
[    3.263757] Bluetooth: HCI device and connection manager initialized
[    3.263760] Bluetooth: HCI socket layer initialized
[    3.263762] Bluetooth: L2CAP socket layer initialized
[    3.263765] Bluetooth: SCO socket layer initialized
[    3.264553] uvcvideo: Found UVC 1.00 device Integrated Camera (04ca:7058)
[    3.273098] usbcore: registered new interface driver btusb
[    3.274277] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[    3.281331] Bluetooth: hci0: Device revision is 5
[    3.281331] Bluetooth: hci0: Secure boot is enabled
[    3.281332] Bluetooth: hci0: OTP lock is enabled
[    3.281346] Bluetooth: hci0: API lock is enabled
[    3.281347] Bluetooth: hci0: Debug lock is disabled
[    3.281348] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    3.281969] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[    3.282437] hid-generic 0003:13BA:0018.0001: input,hidraw0: USB HID v1.10 Keyboard [Barcode Reader ] on usb-0000:00:14.0-2/input0
[    3.282468] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input23
[    3.282506] usbcore: registered new interface driver uvcvideo
[    3.282507] USB Video Class driver (1.1.1)
[    3.285651] input: Barcode Reader  Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:13BA:0018.0002/input/input24
[    3.285732] input: Barcode Reader  System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:13BA:0018.0002/input/input25
[    3.352134] input: Barcode Reader  Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:13BA:0018.0002/input/input26
[    3.352175] hid-generic 0003:13BA:0018.0002: input,hidraw1: USB HID v1.10 Mouse [Barcode Reader ] on usb-0000:00:14.0-2/input1
[    3.353194] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C52B.0003/input/input27
[    3.390969] random: crng init done
[    3.390971] random: 7 urandom warning(s) missed due to ratelimiting
[    3.422745] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1.4/input0
[    3.425476] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0004/input/input28
[    3.425931] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0004/input/input29
[    3.492382] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0004/input/input30
[    3.492854] hid-generic 0003:046D:C52B.0004: input,hiddev96,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1.4/input1
[    3.494888] hid-generic 0003:046D:C52B.0005: hiddev97,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1.4/input2
[    3.494974] usbcore: registered new interface driver usbhid
[    3.494977] usbhid: USB HID core driver
[    4.353351] logitech-djreceiver 0003:046D:C52B.0005: hiddev96,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1.4/input2
[    4.504153] input: Logitech Wireless Device PID:4055 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0005/0003:046D:4055.0006/input/input32
[    4.504440] hid-generic 0003:046D:4055.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Device PID:4055] on usb-0000:00:14.0-1.4/input2:1
[    4.506551] input: Logitech Wireless Device PID:4076 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0005/0003:046D:4076.0007/input/input36
[    4.507206] input: Logitech Wireless Device PID:4076 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0005/0003:046D:4076.0007/input/input37
[    4.507467] input: Logitech Wireless Device PID:4076 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0005/0003:046D:4076.0007/input/input38
[    4.507650] hid-generic 0003:046D:4076.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4076] on usb-0000:00:14.0-1.4/input2:2
[    4.859593] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0005/0003:046D:4055.0006/input/input42
[    4.860143] logitech-hidpp-device 0003:046D:4055.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:14.0-1.4/input2:1
[    5.024700] Bluetooth: hci0: Waiting for firmware download to complete
[    5.025282] Bluetooth: hci0: Firmware loaded in 1711078 usecs
[    5.025297] Bluetooth: hci0: Waiting for device to boot
[    5.036287] Bluetooth: hci0: Device booted in 10745 usecs
[    5.036455] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[    5.040358] Bluetooth: hci0: Applying Intel DDC parameters completed
[    5.041338] Bluetooth: hci0: Reading supported features failed (-16)
[    5.041339] Bluetooth: hci0: Telemetry exception format not supported
[    5.042304] Bluetooth: hci0: Firmware revision 0.0 build 10 week 41 2018
[    5.409853] input: Logitech K540/K545 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0005/0003:046D:4076.0007/input/input43
[    5.410368] logitech-hidpp-device 0003:046D:4076.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K540/K545] on usb-0000:00:14.0-1.4/input2:2
[    8.284411] kauditd_printk_skb: 30 callbacks suppressed
[    8.284414] audit: type=1131 audit(1614324917.340:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.092460] audit: type=1100 audit(1614324918.140:42): pid=476 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_shells,pam_faillock,pam_permit,pam_faillock,pam_gnome_keyring acct="samo" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[    9.093604] audit: type=1101 audit(1614324918.140:43): pid=476 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="samo" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[    9.158660] audit: type=1106 audit(1614324918.200:44): pid=419 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_unix,pam_systemd acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[    9.158810] audit: type=1104 audit(1614324918.200:45): pid=419 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_env,pam_permit acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[    9.166219] audit: type=1103 audit(1614324918.210:46): pid=476 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_faillock,pam_gnome_keyring acct="samo" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[    9.166515] audit: type=1006 audit(1614324918.210:47): pid=476 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[    9.206674] audit: type=1130 audit(1614324918.250:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.215645] audit: type=1101 audit(1614324918.270:49): pid=491 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="samo" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.215657] audit: type=1103 audit(1614324918.270:50): pid=491 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="samo" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[    9.991343] logitech-hidpp-device 0003:046D:4055.0006: HID++ 4.5 device connected.
[   19.455013] kauditd_printk_skb: 12 callbacks suppressed
[   19.455014] audit: type=1131 audit(1614324928.510:63): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@974 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.461801] audit: type=1131 audit(1614324928.510:64): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@974 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   35.430239] audit: type=1101 audit(1614324944.480:65): pid=788 uid=1000 auid=1000 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="samo" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   35.430821] audit: type=1110 audit(1614324944.480:66): pid=788 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   35.432952] audit: type=1105 audit(1614324944.490:67): pid=788 uid=1000 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   46.204274] wlp4s0: authenticate with c0:c1:c0:0b:05:6a
[   46.217198] wlp4s0: send auth to c0:c1:c0:0b:05:6a (try 1/3)
[   46.224311] wlp4s0: authenticated
[   46.232456] wlp4s0: associate with c0:c1:c0:0b:05:6a (try 1/3)
[   46.239070] wlp4s0: RX AssocResp from c0:c1:c0:0b:05:6a (capab=0x411 status=0 aid=3)
[   46.245651] wlp4s0: associated
[   46.346587] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[   46.363699] audit: type=1130 audit(1614324955.420:68): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=netctl@wlp4s0\x2d12zx34 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   46.370601] audit: type=1106 audit(1614324955.420:69): pid=788 uid=1000 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   46.370795] audit: type=1104 audit(1614324955.420:70): pid=788 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[   46.415381] 8021q: 802.1Q VLAN Support v1.8
[  319.936117] audit: type=1101 audit(1614325227.914:71): pid=2113 uid=1000 auid=1000 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="samo" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[  319.936785] audit: type=1110 audit(1614325227.914:72): pid=2113 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'
[  319.939433] audit: type=1105 audit(1614325227.914:73): pid=2113 uid=1000 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/0 res=success'

Hope this gives more detailed info,
Thank you!


"Why join the navy if you can be a pirate?"
- Steve Jobs

Offline

#24 2021-02-26 07:49:05

othersamo_
Member
From: Braislava
Registered: 2020-10-26
Posts: 52

Re: [SOLVED] missing error message

loqs wrote:

I am not familiar with Bluetooth so I do not know if it could be related to blacklisting the nvidia modules.

It would appear the nvidia module is at least needed to produce the message.
Apart the message have you noticed any other issues with 5.11?

Not so far, the bluetooth is the one thing that appeared with new kernel.


"Why join the navy if you can be a pirate?"
- Steve Jobs

Offline

#25 2021-02-26 08:13:31

seth
Member
Registered: 2012-09-03
Posts: 18,895

Re: [SOLVED] missing error message

Accessing the system journal requires you to be root or member of some special groups, https://wiki.archlinux.org/index.php/Systemd/Journal
Also please don't copy & paste out of the pager (it caps the lines) - see the tip in the first link of my signature.

[    5.041338] Bluetooth: hci0: Reading supported features failed (-16)
[    5.041339] Bluetooth: hci0: Telemetry exception format not supported
[    5.042304] Bluetooth: hci0: Firmware revision 0.0 build 10 week 41 2018

That's a debug feature that was added for kernel 5.9 - since you use the lts kernel, you recently jumped from 5.4 to 5.10
https://github.com/torvalds/linux/commi … 9787dfaed9
https://github.com/torvalds/linux/commi … 9787dfaed9

Your chip simply (ok: likely, could eb a bug) doesn't support that, but it's not harmful.

Offline

Board footer

Powered by FluxBB