You are not logged in.

Pages: 1

#1 2021-10-21 11:01:26

Tamerz
Member
Registered: 2021-10-20
Posts: 11

No audio playback from USB audio interface

Hello,

I have a Roland OCTA-CAPTURE USB interface: https://www.roland.com/global/products/octa-capture/

This is detected and shows up, but sound will not play. If I try to watch a video on Youtube for instance, the video freezes and there is no sound.

I'm using KDE and if I right click the sound icon and configure audio devices, the test buttons do not play any sound. If I switch to use my monitor sound over display port instead, the test sounds play.

I'm not 100% sure what info is needed to help troubleshoot this but I'll run some of the commands I see other people posting in here.

$ aplay -lL
null
    Discard all samples (playback) or generate zero samples (capture)
default
    Default Audio Device
sysdefault
    Default Audio Device
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pipewire
    PipeWire Sound Server
pulse
    PulseAudio Sound Server
speex
    Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
default:CARD=OCTACAPTURE
    OCTA-CAPTURE, USB Audio
    Default Audio Device
sysdefault:CARD=OCTACAPTURE
    OCTA-CAPTURE, USB Audio
    Default Audio Device
front:CARD=OCTACAPTURE,DEV=0
    OCTA-CAPTURE, USB Audio
    Front output / input
surround21:CARD=OCTACAPTURE,DEV=0
    OCTA-CAPTURE, USB Audio
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=OCTACAPTURE,DEV=0
    OCTA-CAPTURE, USB Audio
    4.0 Surround output to Front and Rear speakers
surround41:CARD=OCTACAPTURE,DEV=0
    OCTA-CAPTURE, USB Audio
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=OCTACAPTURE,DEV=0
    OCTA-CAPTURE, USB Audio
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=OCTACAPTURE,DEV=0
    OCTA-CAPTURE, USB Audio
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=OCTACAPTURE,DEV=0
    OCTA-CAPTURE, USB Audio
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=OCTACAPTURE,DEV=0
    OCTA-CAPTURE, USB Audio
    IEC958 (S/PDIF) Digital Audio Output
usbstream:CARD=OCTACAPTURE
    OCTA-CAPTURE
    USB Stream Output
hdmi:CARD=NVidia,DEV=0
    HDA NVidia, HDMI 0
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
    HDA NVidia, HDMI 1
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
    HDA NVidia, HDMI 2
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
    HDA NVidia, HDMI 3
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=4
    HDA NVidia, HDMI 4
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=5
    HDA NVidia, HDMI 5
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=6
    HDA NVidia, HDMI 6
    HDMI Audio Output
usbstream:CARD=NVidia
    HDA NVidia
    USB Stream Output
**** List of PLAYBACK Hardware Devices ****
card 0: OCTACAPTURE [OCTA-CAPTURE], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 10: HDMI 4 [HDMI 4]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 11: HDMI 5 [HDMI 5]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 12: HDMI 6 [HDMI 6]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
$ pactl list cards
Card #0
        Name: alsa_card.usb-Roland_OCTA-CAPTURE_ISRLCCCCCCCC-00
        Driver: module-alsa-card.c
        Owner Module: 6
        Properties:
                alsa.card = "0"
                alsa.card_name = "OCTA-CAPTURE"
                alsa.long_card_name = "Roland OCTA-CAPTURE at usb-0000:0a:00.3-3, high speed"
                alsa.driver_name = "snd_usb_audio"
                device.bus_path = "pci-0000:0a:00.3-usb-0:3:1.0"
                sysfs.path = "/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-3/3-3:1.0/sound/card0"
                udev.id = "usb-Roland_OCTA-CAPTURE_ISRLCCCCCCCC-00"
                device.bus = "usb"
                device.vendor.id = "0582"
                device.vendor.name = "Roland Corp."
                device.product.id = "0120"
                device.product.name = "OCTA-CAPTURE"
                device.serial = "Roland_OCTA-CAPTURE_ISRLCCCCCCCC"
                device.string = "0"
                device.description = "OCTA-CAPTURE"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-usb"
        Profiles:
                input:multichannel-input: Multichannel Input (sinks: 0, sources: 1, priority: 1, available: yes)
                output:multichannel-output: Multichannel Output (sinks: 1, sources: 0, priority: 100, available: yes)
                output:multichannel-output+input:multichannel-input: Multichannel Duplex (sinks: 1, sources: 1, priority: 101, available: yes)
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
        Active Profile: output:multichannel-output+input:multichannel-input

Card #1
        Name: alsa_card.pci-0000_43_00.1
        Driver: module-alsa-card.c
        Owner Module: 7
        Properties:
                alsa.card = "1"
                alsa.card_name = "HDA NVidia"
                alsa.long_card_name = "HDA NVidia at 0x9d080000 irq 128"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:43:00.1"
                sysfs.path = "/devices/pci0000:40/0000:40:03.1/0000:43:00.1/sound/card1"
                device.bus = "pci"
                device.vendor.id = "10de"
                device.vendor.name = "NVIDIA Corporation"
                device.product.id = "10f8"
                device.product.name = "TU104 HD Audio Controller"
                device.string = "1"
                device.description = "TU104 HD Audio Controller"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Profiles:
                output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 38668, available: yes)
                output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-stereo-extra5: Digital Stereo (HDMI 6) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-surround-extra5: Digital Surround 5.1 (HDMI 6) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra5: Digital Surround 7.1 (HDMI 6) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-stereo-extra6: Digital Stereo (HDMI 7) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-surround-extra6: Digital Surround 5.1 (HDMI 7) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra6: Digital Surround 7.1 (HDMI 7) Output (sinks: 1, sources: 0, priority: 600, available: no)
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
        Active Profile: output:hdmi-stereo
        Ports:
                hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, available)
                        Properties:
                                device.icon_name = "video-display"
                                device.product.name = "VIOTEK GN27DB"
                        Part of profile(s): output:hdmi-stereo
                hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
                hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
                hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3
                hdmi-output-4: HDMI / DisplayPort 5 (type: HDMI, priority: 5500, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra4, output:hdmi-surround-extra4, output:hdmi-surround71-extra4
                hdmi-output-5: HDMI / DisplayPort 6 (type: HDMI, priority: 5400, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra5, output:hdmi-surround-extra5, output:hdmi-surround71-extra5
                hdmi-output-6: HDMI / DisplayPort 7 (type: HDMI, priority: 5300, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra6, output:hdmi-surround-extra6, output:hdmi-surround71-extra6
$ pactl list sinks
Sink #0
        State: SUSPENDED
        Name: alsa_output.usb-Roland_OCTA-CAPTURE_ISRLCCCCCCCC-00.multichannel-output
        Description: OCTA-CAPTURE Multichannel
        Driver: module-alsa-card.c
        Sample Specification: s32le 10ch 44100Hz
        Channel Map: front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right,aux0,aux1
        Owner Module: 6
        Mute: no
        Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB,   rear-left: 65536 / 100% / 0.00 dB,   rear-right: 65536 / 100% / 0.00 dB,   front-center: 65536 / 100% / 0.00 dB,   lfe: 65536 / 100% / 0.00 dB,   side-left: 65536 / 100% / 0.00 dB,   side-right: 65536 / 100% / 0.00 dB,   aux0: 65536 / 100% / 0.00 dB,   aux1: 65536 / 100% / 0.00 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor Source: alsa_output.usb-Roland_OCTA-CAPTURE_ISRLCCCCCCCC-00.multichannel-output.monitor
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE DECIBEL_VOLUME LATENCY 
        Properties:
                alsa.resolution_bits = "32"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "USB Audio"
                alsa.id = "USB Audio"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "0"
                alsa.card_name = "OCTA-CAPTURE"
                alsa.long_card_name = "Roland OCTA-CAPTURE at usb-0000:0a:00.3-3, high speed"
                alsa.driver_name = "snd_usb_audio"
                device.bus_path = "pci-0000:0a:00.3-usb-0:3:1.0"
                sysfs.path = "/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-3/3-3:1.0/sound/card0"
                udev.id = "usb-Roland_OCTA-CAPTURE_ISRLCCCCCCCC-00"
                device.bus = "usb"
                device.vendor.id = "0582"
                device.vendor.name = "Roland Corp."
                device.product.id = "0120"
                device.product.name = "OCTA-CAPTURE"
                device.serial = "Roland_OCTA-CAPTURE_ISRLCCCCCCCC"
                device.string = "hw:0"
                device.buffering.buffer_size = "1048560"
                device.buffering.fragment_size = "524280"
                device.access_mode = "mmap+timer"
                device.profile.name = "multichannel-output"
                device.profile.description = "Multichannel"
                device.description = "OCTA-CAPTURE Multichannel"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-usb"
        Formats:
                pcm

Sink #1
        State: SUSPENDED
        Name: alsa_output.pci-0000_43_00.1.hdmi-stereo
        Description: TU104 HD Audio Controller Digital Stereo (HDMI)
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 44100Hz
        Channel Map: front-left,front-right
        Owner Module: 7
        Mute: no
        Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor Source: alsa_output.pci-0000_43_00.1.hdmi-stereo.monitor
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS 
        Properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "HDMI 0"
                alsa.id = "HDMI 0"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "3"
                alsa.card = "1"
                alsa.card_name = "HDA NVidia"
                alsa.long_card_name = "HDA NVidia at 0x9d080000 irq 128"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:43:00.1"
                sysfs.path = "/devices/pci0000:40/0000:40:03.1/0000:43:00.1/sound/card1"
                device.bus = "pci"
                device.vendor.id = "10de"
                device.vendor.name = "NVIDIA Corporation"
                device.product.id = "10f8"
                device.product.name = "TU104 HD Audio Controller"
                device.string = "hdmi:1"
                device.buffering.buffer_size = "352768"
                device.buffering.fragment_size = "176384"
                device.access_mode = "mmap+timer"
                device.profile.name = "hdmi-stereo"
                device.profile.description = "Digital Stereo (HDMI)"
                device.description = "TU104 HD Audio Controller Digital Stereo (HDMI)"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Ports:
                hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, available)
        Active Port: hdmi-output-0
        Formats:
                pcm
$ sudo dmesg | grep -iE 'snd|sof'
[    0.265474] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.294809] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.294809] software IO TLB: mapped [mem 0x000000006ee5d000-0x0000000072e5d000] (64MB)
[    4.034004] usb 7-4: Manufacturer: Microsoft
[    4.136348] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:40/0000:40:07.1/0000:44:00.3/usb7/7-4/7-4:1.0/0003:045E:00DB.0004/input/input6
[    4.193608] microsoft 0003:045E:00DB.0004: input,hidraw3: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:44:00.3-4/input0
[    4.193931] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:40/0000:40:07.1/0000:44:00.3/usb7/7-4/7-4:1.1/0003:045E:00DB.0005/input/input7
[    4.253445] microsoft 0003:045E:00DB.0005: input,hidraw4: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:44:00.3-4/input1
[    4.377453] usbcore: registered new interface driver snd-usb-audio
[    4.385949] snd_hda_intel 0000:43:00.1: Disabling MSI
[    4.385970] snd_hda_intel 0000:43:00.1: Handle vga_switcheroo audio client

Offline

#2 2021-10-22 08:06:37

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,944

Re: No audio playback from USB audio interface

Did this happen after e.g. a certain kernel update? There are always/often some changes around snd_usb_audio and there might be an edge case that your DAC doesn't like.

Offline

#3 2021-10-22 12:41:49

Tamerz
Member
Registered: 2021-10-20
Posts: 11

Re: No audio playback from USB audio interface

V1del wrote:

Did this happen after e.g. a certain kernel update? There are always/often some changes around snd_usb_audio and there might be an edge case that your DAC doesn't like.

This is a new install so it hasn’t worked at all so far.

Offline

Pages: 1

Board footer

Powered by FluxBB