You are not logged in.

#1 2021-11-07 22:10:01

blarq
Member
Registered: 2021-11-07
Posts: 3

Poor Video Playback -- High "Render/3D" Intel GPU Usage

Hi, I am a first-time user of Arch, and a few days ago I installed Arch on my new laptop and so far everything is working, however I'm having some performance issues.

This manifests primarily in video playback. Using mpv or vlc to play 4k 60fps video on the built-in display causes the fans to spin up loudly and I have occasional frame drops. CPU use in htop is ~30% and consulting "intel_gpu_top" shows both mpv and vlc are using hardware video decode correctly (~30% "Video" usage), however the problem seems to be that "Render/3D" is pegged at 100%. This problem is amplified when using my 4k 60Hz external monitor and appears even for 1080p 60fps playback. It seems the "Render/3D" load is highly dependent on the total resolution of all active displays (this is not surprising), but this means any video playback causes at least some issues with my external display connected.

My goal is to play 4k 60fps content on the external monitor, however given playback barely works on the lower resolution built-in display, the framedrops are constant on the external display, even with the internal display disabled to lower the GPU workload. Additionally, I have occasional glitches on the external 4k monitor when playing lower quality (720p or 1080p 30fps) video on the built-in display. By "glitches", I mean it appears part of a single frame is blank/torn and the audio drops out briefly when it's sent over HDMI to the external display. These glitches never occur when using the built-in display alone or when using both displays but not playing any video (i.e. only productivity tasks).

Assuming this is not too large of an ask of my hardware (see below), my impression is that this would be a driver issue, Xorg issue, or problem with my desktop environment/display manager.
Driver: I am using the latest i915 driver (see "inxi -G" output below) and have not installed xf86-video-intel as recommended for the Cinnamon DE (see https://wiki.archlinux.org/title/cinnamon ).
Xorg: I have not made an "xorg.conf" or adjusted any settings as otherwise everything worked "out of the box". My "Xorg.0.log" is given below
DE: Cinnamon + LightDM -- again this worked out of the box with "lightdm-gtk-greeter" starting X and loading Cinnamon.

Thanks in advance if anyone can point me in the right direction or if this is simply the best I'm going to get out of the hardware. I've read https://wiki.archlinux.org/title/Intel_graphics and a number of other forum threads here and elsewhere, but I have not found anything that has improved video playback for me yet. This includes forcing the xf86-video-driver and specifying the "Tearfree" option as suggested in many guides/forum posts including here: https://wiki.archlinux.org/title/Intel_graphics#Tearing. The xf86-video-driver had identical video playback performance but doesn't play nicely with Cinnamon as expected (it works but I get occasional graphical glitches without any GPU load unlike before). One interesting difference is that the "Blitter" line in "intel_gpu_top" showed usage whereas before it was always 0%, but this did not produce any better performance.

Please let me know if I've left out any important information/logs that you'd like me to post, and if you have suggestions on how to improve my performance.

System info:
Framework laptop: https://wiki.archlinux.org/title/Framework_Laptop https://frame.work/
CPU/GPU: i5-1135G7 (Tiger Lake) w/ Iris Xe Graphics

 $ cat /proc/version
Linux version 5.14.16-arch1-1 (linux@archlinux) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Tue, 02 Nov 2021 22:22:59 +0000
 $ inxi -G
Graphics:  Device-1: Intel TigerLake-LP GT2 [Iris Xe Graphics] driver: i915 v: kernel
           Display: x11 server: X.Org 1.20.13 driver: loaded: modesetting unloaded: fbdev,vesa resolution: 1: 2256x1504~60Hz
           2: 3840x2160~60Hz
           OpenGL: renderer: Mesa Intel Xe Graphics (TGL GT2) v: 4.6 Mesa 21.2.4
$ lspci
00:00.0 Host bridge: Intel Corporation 11th Gen Core Processor Host Bridge/DRAM Registers (rev 01)
00:02.0 VGA compatible controller: Intel Corporation TigerLake-LP GT2 [Iris Xe Graphics] (rev 01)
00:04.0 Signal processing controller: Intel Corporation TigerLake-LP Dynamic Tuning Processor Participant (rev 01)
00:06.0 PCI bridge: Intel Corporation 11th Gen Core Processor PCIe Controller (rev 01)
00:07.0 PCI bridge: Intel Corporation Tiger Lake-LP Thunderbolt 4 PCI Express Root Port #0 (rev 01)
00:07.1 PCI bridge: Intel Corporation Tiger Lake-LP Thunderbolt 4 PCI Express Root Port #1 (rev 01)
00:07.2 PCI bridge: Intel Corporation Tiger Lake-LP Thunderbolt 4 PCI Express Root Port #2 (rev 01)
00:07.3 PCI bridge: Intel Corporation Tiger Lake-LP Thunderbolt 4 PCI Express Root Port #3 (rev 01)
00:08.0 System peripheral: Intel Corporation GNA Scoring Accelerator module (rev 01)
00:0a.0 Signal processing controller: Intel Corporation Tigerlake Telemetry Aggregator Driver (rev 01)
00:0d.0 USB controller: Intel Corporation Tiger Lake-LP Thunderbolt 4 USB Controller (rev 01)
00:0d.2 USB controller: Intel Corporation Tiger Lake-LP Thunderbolt 4 NHI #0 (rev 01)
00:0d.3 USB controller: Intel Corporation Tiger Lake-LP Thunderbolt 4 NHI #1 (rev 01)
00:12.0 Serial controller: Intel Corporation Tiger Lake-LP Integrated Sensor Hub (rev 20)
00:14.0 USB controller: Intel Corporation Tiger Lake-LP USB 3.2 Gen 2x1 xHCI Host Controller (rev 20)
00:14.2 RAM memory: Intel Corporation Tiger Lake-LP Shared SRAM (rev 20)
00:15.0 Serial bus controller [0c80]: Intel Corporation Tiger Lake-LP Serial IO I2C Controller #0 (rev 20)
00:15.1 Serial bus controller [0c80]: Intel Corporation Tiger Lake-LP Serial IO I2C Controller #1 (rev 20)
00:15.3 Serial bus controller [0c80]: Intel Corporation Tiger Lake-LP Serial IO I2C Controller #3 (rev 20)
00:16.0 Communication controller: Intel Corporation Tiger Lake-LP Management Engine Interface (rev 20)
00:1d.0 PCI bridge: Intel Corporation Device a0b1 (rev 20)
00:1f.0 ISA bridge: Intel Corporation Tiger Lake-LP LPC Controller (rev 20)
00:1f.3 Audio device: Intel Corporation Tiger Lake-LP Smart Sound Technology Audio Controller (rev 20)
00:1f.4 SMBus: Intel Corporation Tiger Lake-LP SMBus Controller (rev 20)
00:1f.5 Serial bus controller [0c80]: Intel Corporation Tiger Lake-LP SPI Controller (rev 20)
01:00.0 Non-Volatile memory controller: Sandisk Corp WD Black SN750 / PC SN730 NVMe SSD
aa:00.0 Network controller: Intel Corporation Wi-Fi 6 AX210/AX211/AX411 160MHz (rev 1a)
$ cat /var/log/Xorg.0.log
[     2.034] 
X.Org X Server 1.20.13
X Protocol Version 11, Revision 0
[     2.034] Build Operating System: Linux Archlinux
[     2.034] Current Operating System: Linux tom-Framework 5.14.16-arch1-1 #1 SMP PREEMPT Tue, 02 Nov 2021 22:22:59 +0000 x86_64
[     2.034] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=50136a7b-343f-4409-a81e-1cf71ef2e59c rw loglevel=3 quiet mem_sleep_default=deep
[     2.034] Build Date: 31 October 2021  06:30:01AM
[     2.034]  
[     2.034] Current version of pixman: 0.40.0
[     2.034] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     2.034] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     2.034] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov  7 15:07:32 2021
[     2.034] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     2.034] (==) No Layout section.  Using the first Screen section.
[     2.034] (==) No screen section available. Using defaults.
[     2.034] (**) |-->Screen "Default Screen Section" (0)
[     2.034] (**) |   |-->Monitor "<default monitor>"
[     2.035] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     2.035] (==) Automatically adding devices
[     2.035] (==) Automatically enabling devices
[     2.035] (==) Automatically adding GPU devices
[     2.035] (==) Automatically binding GPU devices
[     2.035] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     2.035] (WW) The directory "/usr/share/fonts/misc" does not exist.
[     2.035] 	Entry deleted from font path.
[     2.035] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[     2.035] 	Entry deleted from font path.
[     2.035] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     2.035] 	Entry deleted from font path.
[     2.035] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     2.035] 	Entry deleted from font path.
[     2.035] (==) FontPath set to:
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[     2.035] (==) ModulePath set to "/usr/lib/xorg/modules"
[     2.035] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     2.035] (II) Module ABI versions:
[     2.035] 	X.Org ANSI C Emulation: 0.4
[     2.035] 	X.Org Video Driver: 24.1
[     2.035] 	X.Org XInput driver : 24.1
[     2.035] 	X.Org Server Extension : 10.0
[     2.035] (++) using VT number 7

[     2.035] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     2.035] (II) xfree86: Adding drm device (/dev/dri/card0)
[     2.049] (--) PCI:*(0@0:2:0) 8086:9a49:f111:0001 rev 1, Mem @ 0x605c000000/16777216, 0x4000000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[     2.049] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     2.049] (II) LoadModule: "glx"
[     2.049] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     2.050] (II) Module glx: vendor="X.Org Foundation"
[     2.050] 	compiled for 1.20.13, module version = 1.0.0
[     2.050] 	ABI class: X.Org Server Extension, version 10.0
[     2.050] (==) Matched intel as autoconfigured driver 0
[     2.050] (==) Matched modesetting as autoconfigured driver 1
[     2.050] (==) Matched fbdev as autoconfigured driver 2
[     2.050] (==) Matched vesa as autoconfigured driver 3
[     2.050] (==) Assigned the driver to the xf86ConfigLayout
[     2.050] (II) LoadModule: "intel"
[     2.050] (WW) Warning, couldn't open module intel
[     2.050] (EE) Failed to load module "intel" (module does not exist, 0)
[     2.050] (II) LoadModule: "modesetting"
[     2.050] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     2.050] (II) Module modesetting: vendor="X.Org Foundation"
[     2.050] 	compiled for 1.20.13, module version = 1.20.13
[     2.050] 	Module class: X.Org Video Driver
[     2.050] 	ABI class: X.Org Video Driver, version 24.1
[     2.050] (II) LoadModule: "fbdev"
[     2.050] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     2.050] (II) Module fbdev: vendor="X.Org Foundation"
[     2.050] 	compiled for 1.20.8, module version = 0.5.0
[     2.050] 	Module class: X.Org Video Driver
[     2.050] 	ABI class: X.Org Video Driver, version 24.1
[     2.050] (II) LoadModule: "vesa"
[     2.050] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     2.051] (II) Module vesa: vendor="X.Org Foundation"
[     2.051] 	compiled for 1.20.9, module version = 2.5.0
[     2.051] 	Module class: X.Org Video Driver
[     2.051] 	ABI class: X.Org Video Driver, version 24.1
[     2.051] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     2.051] (II) FBDEV: driver for framebuffer: fbdev
[     2.051] (II) VESA: driver for VESA chipsets: vesa
[     2.067] (II) modeset(0): using drv /dev/dri/card0
[     2.067] (WW) Falling back to old probe method for fbdev
[     2.067] (II) Loading sub module "fbdevhw"
[     2.067] (II) LoadModule: "fbdevhw"
[     2.067] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     2.067] (II) Module fbdevhw: vendor="X.Org Foundation"
[     2.067] 	compiled for 1.20.13, module version = 0.0.2
[     2.067] 	ABI class: X.Org Video Driver, version 24.1
[     2.067] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     2.067] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[     2.067] (==) modeset(0): RGB weight 888
[     2.067] (==) modeset(0): Default visual is TrueColor
[     2.067] (II) Loading sub module "glamoregl"
[     2.067] (II) LoadModule: "glamoregl"
[     2.067] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     2.071] (II) Module glamoregl: vendor="X.Org Foundation"
[     2.071] 	compiled for 1.20.13, module version = 1.0.1
[     2.071] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     2.179] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Xe Graphics (TGL GT2)
[     2.179] (II) modeset(0): glamor initialized
[     2.182] (II) modeset(0): Output eDP-1 has no monitor section
[     2.182] (II) modeset(0): Output DP-1 has no monitor section
[     2.182] (II) modeset(0): Output DP-2 has no monitor section
[     2.182] (II) modeset(0): Output DP-3 has no monitor section
[     2.182] (II) modeset(0): Output DP-4 has no monitor section
[     2.184] (II) modeset(0): EDID for output eDP-1
[     2.184] (II) modeset(0): Manufacturer: BOE  Model: 95f  Serial#: 0
[     2.184] (II) modeset(0): Year: 2019  Week: 23
[     2.184] (II) modeset(0): EDID Version: 1.4
[     2.184] (II) modeset(0): Digital Display Input
[     2.184] (II) modeset(0): 8 bits per channel
[     2.184] (II) modeset(0): Digital interface is DisplayPort
[     2.184] (II) modeset(0): Max Image Size [cm]: horiz.: 28  vert.: 19
[     2.184] (II) modeset(0): Gamma: 2.20
[     2.184] (II) modeset(0): No DPMS capabilities specified
[     2.184] (II) modeset(0): Supported color encodings: RGB 4:4:4 
[     2.184] (II) modeset(0): First detailed timing is preferred mode
[     2.184] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[     2.184] (II) modeset(0): Display is continuous-frequency
[     2.184] (II) modeset(0): redX: 0.640 redY: 0.329   greenX: 0.300 greenY: 0.600
[     2.184] (II) modeset(0): blueX: 0.149 blueY: 0.060   whiteX: 0.312 whiteY: 0.328
[     2.184] (II) modeset(0): Manufacturer's mask: 0
[     2.184] (II) modeset(0): Supported detailed timing:
[     2.184] (II) modeset(0): clock: 235.7 MHz   Image Size:  285 x 190 mm
[     2.184] (II) modeset(0): h_active: 2256  h_sync: 2304  h_sync_end 2336 h_blank_end 2536 h_border: 0
[     2.185] (II) modeset(0): v_active: 1504  v_sync: 1507  v_sync_end 1513 v_blanking: 1549 v_border: 0
[     2.185] (II) modeset(0): Supported detailed timing:
[     2.185] (II) modeset(0): clock: 188.6 MHz   Image Size:  285 x 190 mm
[     2.185] (II) modeset(0): h_active: 2256  h_sync: 2304  h_sync_end 2336 h_blank_end 2536 h_border: 0
[     2.185] (II) modeset(0): v_active: 1504  v_sync: 1507  v_sync_end 1513 v_blanking: 1549 v_border: 0
[     2.185] (II) modeset(0):  BOE CQ
[     2.185] (II) modeset(0):  NE135FBM-N41
[     2.185] (II) modeset(0): EDID (in hex):
[     2.185] (II) modeset(0): 	00ffffffffffff0009e55f0900000000
[     2.185] (II) modeset(0): 	171d0104a51c137803de50a3544c9926
[     2.185] (II) modeset(0): 	0f505400000001010101010101010101
[     2.185] (II) modeset(0): 	010101010101115cd01881e02d503020
[     2.185] (II) modeset(0): 	36001dbe1000001aa749d01881e02d50
[     2.185] (II) modeset(0): 	302036001dbe1000001a000000fe0042
[     2.185] (II) modeset(0): 	4f452043510a202020202020000000fe
[     2.185] (II) modeset(0): 	004e4531333546424d2d4e34310a00fb
[     2.185] (II) modeset(0): Printing probed modes for output eDP-1
[     2.185] (II) modeset(0): Modeline "2256x1504"x60.0  235.69  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (92.9 kHz eP)
[     2.185] (II) modeset(0): Modeline "2256x1504"x48.0  188.55  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (74.3 kHz e)
[     2.185] (II) modeset(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[     2.185] (II) modeset(0): Modeline "1856x1392"x60.0  218.30  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[     2.185] (II) modeset(0): Modeline "1792x1344"x60.0  204.80  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[     2.185] (II) modeset(0): Modeline "2048x1152"x120.0  406.50  2048 2220 2444 2840  1152 1153 1156 1193 doublescan -hsync +vsync (143.1 kHz d)
[     2.185] (II) modeset(0): Modeline "2048x1152"x120.0  302.50  2048 2072 2088 2128  1152 1153 1156 1185 doublescan +hsync -vsync (142.2 kHz d)
[     2.185] (II) modeset(0): Modeline "2048x1152"x59.9  197.00  2048 2184 2400 2752  1152 1155 1160 1195 -hsync +vsync (71.6 kHz d)
[     2.185] (II) modeset(0): Modeline "2048x1152"x59.9  156.75  2048 2096 2128 2208  1152 1155 1160 1185 +hsync -vsync (71.0 kHz d)
[     2.185] (II) modeset(0): Modeline "1920x1200"x59.9  193.25  1920 2056 2256 2592  1200 1203 1209 1245 -hsync +vsync (74.6 kHz d)
[     2.185] (II) modeset(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz d)
[     2.185] (II) modeset(0): Modeline "1920x1080"x120.0  356.38  1920 2080 2288 2656  1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[     2.185] (II) modeset(0): Modeline "1920x1080"x119.9  266.50  1920 1944 1960 2000  1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[     2.185] (II) modeset(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[     2.185] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[     2.185] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[     2.185] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[     2.185] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[     2.185] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[     2.185] (II) modeset(0): Modeline "1600x900"x120.0  246.00  1600 1728 1900 2200  900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[     2.185] (II) modeset(0): Modeline "1600x900"x119.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[     2.185] (II) modeset(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[     2.185] (II) modeset(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[     2.185] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[     2.185] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[     2.185] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[     2.185] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[     2.185] (II) modeset(0): Modeline "1440x810"x120.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[     2.185] (II) modeset(0): Modeline "1440x810"x119.9  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[     2.185] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[     2.185] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[     2.185] (II) modeset(0): Modeline "1280x800"x120.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[     2.185] (II) modeset(0): Modeline "1280x800"x119.9  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[     2.185] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[     2.185] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[     2.185] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[     2.185] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[     2.185] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[     2.185] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[     2.185] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[     2.185] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[     2.185] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[     2.185] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[     2.185] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[     2.185] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[     2.185] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[     2.185] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[     2.185] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[     2.185] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[     2.185] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[     2.185] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[     2.185] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[     2.185] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[     2.185] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[     2.185] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[     2.185] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[     2.185] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[     2.185] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[     2.185] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[     2.185] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[     2.185] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[     2.185] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[     2.185] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[     2.185] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[     2.185] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[     2.185] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[     2.185] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[     2.185] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[     2.185] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[     2.185] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[     2.185] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[     2.185] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[     2.185] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[     2.185] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[     2.185] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[     2.185] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[     2.185] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[     2.185] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[     2.185] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[     2.185] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[     2.185] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[     2.185] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[     2.185] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[     2.185] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[     2.185] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[     2.185] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[     2.185] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[     2.185] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[     2.185] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[     2.185] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[     2.185] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[     2.185] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[     2.185] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[     2.185] (II) modeset(0): EDID for output DP-1
[     2.185] (II) modeset(0): EDID for output DP-2
[     2.186] (II) modeset(0): EDID for output DP-3
[     2.186] (II) modeset(0): EDID for output DP-4
[     2.186] (II) modeset(0): Output eDP-1 connected
[     2.186] (II) modeset(0): Output DP-1 disconnected
[     2.186] (II) modeset(0): Output DP-2 disconnected
[     2.186] (II) modeset(0): Output DP-3 disconnected
[     2.186] (II) modeset(0): Output DP-4 disconnected
[     2.186] (II) modeset(0): Using exact sizes for initial modes
[     2.186] (II) modeset(0): Output eDP-1 using initial mode 2256x1504 +0+0
[     2.186] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[     2.186] (==) modeset(0): DPI set to (96, 96)
[     2.186] (II) Loading sub module "fb"
[     2.186] (II) LoadModule: "fb"
[     2.186] (II) Loading /usr/lib/xorg/modules/libfb.so
[     2.186] (II) Module fb: vendor="X.Org Foundation"
[     2.186] 	compiled for 1.20.13, module version = 1.0.0
[     2.186] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     2.186] (II) UnloadModule: "fbdev"
[     2.186] (II) Unloading fbdev
[     2.186] (II) UnloadSubModule: "fbdevhw"
[     2.186] (II) Unloading fbdevhw
[     2.186] (II) UnloadModule: "vesa"
[     2.186] (II) Unloading vesa
[     2.208] (==) modeset(0): Backing store enabled
[     2.208] (==) modeset(0): Silken mouse disabled
[     2.284] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[     2.284] (==) modeset(0): DPMS enabled
[     2.284] (II) modeset(0): [DRI2] Setup complete
[     2.284] (II) modeset(0): [DRI2]   DRI driver: iris
[     2.284] (II) modeset(0): [DRI2]   VDPAU driver: va_gl
[     2.284] (II) Initializing extension Generic Event Extension
[     2.284] (II) Initializing extension SHAPE
[     2.284] (II) Initializing extension MIT-SHM
[     2.284] (II) Initializing extension XInputExtension
[     2.284] (II) Initializing extension XTEST
[     2.285] (II) Initializing extension BIG-REQUESTS
[     2.285] (II) Initializing extension SYNC
[     2.285] (II) Initializing extension XKEYBOARD
[     2.285] (II) Initializing extension XC-MISC
[     2.285] (II) Initializing extension SECURITY
[     2.285] (II) Initializing extension XFIXES
[     2.285] (II) Initializing extension RENDER
[     2.285] (II) Initializing extension RANDR
[     2.285] (II) Initializing extension COMPOSITE
[     2.285] (II) Initializing extension DAMAGE
[     2.285] (II) Initializing extension MIT-SCREEN-SAVER
[     2.285] (II) Initializing extension DOUBLE-BUFFER
[     2.285] (II) Initializing extension RECORD
[     2.285] (II) Initializing extension DPMS
[     2.285] (II) Initializing extension Present
[     2.285] (II) Initializing extension DRI3
[     2.286] (II) Initializing extension X-Resource
[     2.286] (II) Initializing extension XVideo
[     2.286] (II) Initializing extension XVideo-MotionCompensation
[     2.286] (II) Initializing extension GLX
[     2.289] (II) AIGLX: Loaded and initialized iris
[     2.289] (II) GLX: Initialized DRI2 GL provider for screen 0
[     2.289] (II) Initializing extension XFree86-VidModeExtension
[     2.289] (II) Initializing extension XFree86-DGA
[     2.289] (II) Initializing extension XFree86-DRI
[     2.289] (II) Initializing extension DRI2
[     2.290] (II) modeset(0): Damage tracking initialized
[     2.290] (II) modeset(0): Setting screen physical size to 596 x 397
[     2.349] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     2.349] (II) No input driver specified, ignoring this device.
[     2.349] (II) This device may have been added with another device file.
[     2.349] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     2.349] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     2.349] (II) LoadModule: "libinput"
[     2.349] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     2.352] (II) Module libinput: vendor="X.Org Foundation"
[     2.352] 	compiled for 1.20.13, module version = 1.2.0
[     2.352] 	Module class: X.Org XInput Driver
[     2.352] 	ABI class: X.Org XInput driver, version 24.1
[     2.352] (II) Using input driver 'libinput' for 'Power Button'
[     2.352] (**) Power Button: always reports core events
[     2.352] (**) Option "Device" "/dev/input/event1"
[     2.352] (**) Option "_source" "server/udev"
[     2.356] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     2.357] (II) event1  - Power Button: device is a keyboard
[     2.357] (II) event1  - Power Button: device removed
[     2.379] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     2.379] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     2.380] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     2.380] (II) event1  - Power Button: device is a keyboard
[     2.381] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[     2.382] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     2.382] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     2.382] (**) AT Translated Set 2 keyboard: always reports core events
[     2.382] (**) Option "Device" "/dev/input/event2"
[     2.382] (**) Option "_source" "server/udev"
[     2.382] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     2.382] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[     2.382] (II) event2  - AT Translated Set 2 keyboard: device removed
[     2.402] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[     2.402] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 7)
[     2.403] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     2.403] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[     2.472] (II) modeset(0): EDID vendor "BOE", prod id 2399
[     2.472] (II) modeset(0): Printing DDC gathered Modelines:
[     2.472] (II) modeset(0): Modeline "2256x1504"x0.0  235.69  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (92.9 kHz eP)
[     2.472] (II) modeset(0): Modeline "2256x1504"x0.0  188.55  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (74.3 kHz e)
[     2.474] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0 /dev/dri/card0
[     2.474] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[     2.474] failed to find screen to remove
[     2.474] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[     2.474] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     2.474] (II) Using input driver 'libinput' for 'Video Bus'
[     2.474] (**) Video Bus: always reports core events
[     2.474] (**) Option "Device" "/dev/input/event3"
[     2.475] (**) Option "_source" "server/udev"
[     2.475] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[     2.475] (II) event3  - Video Bus: device is a keyboard
[     2.475] (II) event3  - Video Bus: device removed
[     2.512] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event3"
[     2.512] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     2.513] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[     2.513] (II) event3  - Video Bus: device is a keyboard
[     2.513] (II) config/udev: Adding input device FRMW0001:00 32AC:0006 Consumer Control (/dev/input/event5)
[     2.513] (**) FRMW0001:00 32AC:0006 Consumer Control: Applying InputClass "libinput keyboard catchall"
[     2.513] (II) Using input driver 'libinput' for 'FRMW0001:00 32AC:0006 Consumer Control'
[     2.513] (**) FRMW0001:00 32AC:0006 Consumer Control: always reports core events
[     2.513] (**) Option "Device" "/dev/input/event5"
[     2.513] (**) Option "_source" "server/udev"
[     2.513] (II) event5  - FRMW0001:00 32AC:0006 Consumer Control: is tagged by udev as: Keyboard
[     2.514] (II) event5  - FRMW0001:00 32AC:0006 Consumer Control: device is a keyboard
[     2.514] (II) event5  - FRMW0001:00 32AC:0006 Consumer Control: device removed
[     2.542] (II) libinput: FRMW0001:00 32AC:0006 Consumer Control: needs a virtual subdevice
[     2.542] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-FRMW0001:00/0018:32AC:0006.0001/input/input6/event5"
[     2.542] (II) XINPUT: Adding extended input device "FRMW0001:00 32AC:0006 Consumer Control" (type: MOUSE, id 9)
[     2.542] (**) Option "AccelerationScheme" "none"
[     2.542] (**) FRMW0001:00 32AC:0006 Consumer Control: (accel) selected scheme none/0
[     2.542] (**) FRMW0001:00 32AC:0006 Consumer Control: (accel) acceleration factor: 2.000
[     2.542] (**) FRMW0001:00 32AC:0006 Consumer Control: (accel) acceleration threshold: 4
[     2.543] (II) event5  - FRMW0001:00 32AC:0006 Consumer Control: is tagged by udev as: Keyboard
[     2.543] (II) event5  - FRMW0001:00 32AC:0006 Consumer Control: device is a keyboard
[     2.543] (**) FRMW0001:00 32AC:0006 Consumer Control: Applying InputClass "libinput keyboard catchall"
[     2.543] (II) Using input driver 'libinput' for 'FRMW0001:00 32AC:0006 Consumer Control'
[     2.543] (**) FRMW0001:00 32AC:0006 Consumer Control: always reports core events
[     2.543] (**) Option "Device" "/dev/input/event5"
[     2.543] (**) Option "_source" "_driver/libinput"
[     2.543] (II) libinput: FRMW0001:00 32AC:0006 Consumer Control: is a virtual subdevice
[     2.543] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-FRMW0001:00/0018:32AC:0006.0001/input/input6/event5"
[     2.543] (II) XINPUT: Adding extended input device "FRMW0001:00 32AC:0006 Consumer Control" (type: KEYBOARD, id 10)
[     2.544] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event12)
[     2.544] (II) No input driver specified, ignoring this device.
[     2.544] (II) This device may have been added with another device file.
[     2.544] (II) config/udev: Adding input device FRMW0001:00 32AC:0006 Wireless Radio Control (/dev/input/event4)
[     2.544] (**) FRMW0001:00 32AC:0006 Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[     2.544] (II) Using input driver 'libinput' for 'FRMW0001:00 32AC:0006 Wireless Radio Control'
[     2.544] (**) FRMW0001:00 32AC:0006 Wireless Radio Control: always reports core events
[     2.544] (**) Option "Device" "/dev/input/event4"
[     2.544] (**) Option "_source" "server/udev"
[     2.545] (II) event4  - FRMW0001:00 32AC:0006 Wireless Radio Control: is tagged by udev as: Keyboard
[     2.545] (II) event4  - FRMW0001:00 32AC:0006 Wireless Radio Control: device is a keyboard
[     2.545] (II) event4  - FRMW0001:00 32AC:0006 Wireless Radio Control: device removed
[     2.589] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-FRMW0001:00/0018:32AC:0006.0001/input/input5/event4"
[     2.589] (II) XINPUT: Adding extended input device "FRMW0001:00 32AC:0006 Wireless Radio Control" (type: KEYBOARD, id 11)
[     2.590] (II) event4  - FRMW0001:00 32AC:0006 Wireless Radio Control: is tagged by udev as: Keyboard
[     2.590] (II) event4  - FRMW0001:00 32AC:0006 Wireless Radio Control: device is a keyboard
[     2.590] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[     2.590] (II) No input driver specified, ignoring this device.
[     2.590] (II) This device may have been added with another device file.
[     2.590] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[     2.590] (II) No input driver specified, ignoring this device.
[     2.590] (II) This device may have been added with another device file.
[     2.591] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[     2.591] (II) No input driver specified, ignoring this device.
[     2.591] (II) This device may have been added with another device file.
[     2.591] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11)
[     2.591] (II) No input driver specified, ignoring this device.
[     2.591] (II) This device may have been added with another device file.
[     2.591] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event13)
[     2.591] (II) No input driver specified, ignoring this device.
[     2.591] (II) This device may have been added with another device file.
[     2.591] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event14)
[     2.591] (II) No input driver specified, ignoring this device.
[     2.591] (II) This device may have been added with another device file.
[     2.591] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=12 (/dev/input/event16)
[     2.591] (II) No input driver specified, ignoring this device.
[     2.591] (II) This device may have been added with another device file.
[     2.591] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=11 (/dev/input/event15)
[     2.591] (II) No input driver specified, ignoring this device.
[     2.591] (II) This device may have been added with another device file.
[     2.591] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=16 (/dev/input/event20)
[     2.591] (II) No input driver specified, ignoring this device.
[     2.591] (II) This device may have been added with another device file.
[     2.592] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=14 (/dev/input/event18)
[     2.592] (II) No input driver specified, ignoring this device.
[     2.592] (II) This device may have been added with another device file.
[     2.592] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=13 (/dev/input/event17)
[     2.592] (II) No input driver specified, ignoring this device.
[     2.592] (II) This device may have been added with another device file.
[     2.592] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=15 (/dev/input/event19)
[     2.592] (II) No input driver specified, ignoring this device.
[     2.592] (II) This device may have been added with another device file.
[     2.592] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=17 (/dev/input/event21)
[     2.592] (II) No input driver specified, ignoring this device.
[     2.592] (II) This device may have been added with another device file.
[     2.592] (II) config/udev: Adding input device PIXA3854:00 093A:0274 Mouse (/dev/input/event6)
[     2.593] (**) PIXA3854:00 093A:0274 Mouse: Applying InputClass "libinput pointer catchall"
[     2.593] (II) Using input driver 'libinput' for 'PIXA3854:00 093A:0274 Mouse'
[     2.593] (**) PIXA3854:00 093A:0274 Mouse: always reports core events
[     2.593] (**) Option "Device" "/dev/input/event6"
[     2.593] (**) Option "_source" "server/udev"
[     2.593] (II) event6  - PIXA3854:00 093A:0274 Mouse: is tagged by udev as: Mouse Pointingstick
[     2.593] (II) event6  - PIXA3854:00 093A:0274 Mouse: device is a pointer
[     2.594] (II) event6  - PIXA3854:00 093A:0274 Mouse: device removed
[     2.676] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.3/i2c_designware.2/i2c-11/i2c-PIXA3854:00/0018:093A:0274.0002/input/input24/event6"
[     2.676] (II) XINPUT: Adding extended input device "PIXA3854:00 093A:0274 Mouse" (type: MOUSE, id 12)
[     2.676] (**) Option "AccelerationScheme" "none"
[     2.676] (**) PIXA3854:00 093A:0274 Mouse: (accel) selected scheme none/0
[     2.676] (**) PIXA3854:00 093A:0274 Mouse: (accel) acceleration factor: 2.000
[     2.676] (**) PIXA3854:00 093A:0274 Mouse: (accel) acceleration threshold: 4
[     2.676] (II) event6  - PIXA3854:00 093A:0274 Mouse: is tagged by udev as: Mouse Pointingstick
[     2.677] (II) event6  - PIXA3854:00 093A:0274 Mouse: device is a pointer
[     2.677] (II) config/udev: Adding input device PIXA3854:00 093A:0274 Touchpad (/dev/input/event7)
[     2.677] (**) PIXA3854:00 093A:0274 Touchpad: Applying InputClass "libinput touchpad catchall"
[     2.677] (II) Using input driver 'libinput' for 'PIXA3854:00 093A:0274 Touchpad'
[     2.677] (**) PIXA3854:00 093A:0274 Touchpad: always reports core events
[     2.677] (**) Option "Device" "/dev/input/event7"
[     2.677] (**) Option "_source" "server/udev"
[     2.678] (II) event7  - PIXA3854:00 093A:0274 Touchpad: is tagged by udev as: Touchpad
[     2.678] (II) event7  - PIXA3854:00 093A:0274 Touchpad: device is a touchpad
[     2.678] (II) event7  - PIXA3854:00 093A:0274 Touchpad: device removed
[     2.762] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.3/i2c_designware.2/i2c-11/i2c-PIXA3854:00/0018:093A:0274.0002/input/input25/event7"
[     2.762] (II) XINPUT: Adding extended input device "PIXA3854:00 093A:0274 Touchpad" (type: TOUCHPAD, id 13)
[     2.763] (**) Option "AccelerationScheme" "none"
[     2.763] (**) PIXA3854:00 093A:0274 Touchpad: (accel) selected scheme none/0
[     2.763] (**) PIXA3854:00 093A:0274 Touchpad: (accel) acceleration factor: 2.000
[     2.763] (**) PIXA3854:00 093A:0274 Touchpad: (accel) acceleration threshold: 4
[     2.764] (II) event7  - PIXA3854:00 093A:0274 Touchpad: is tagged by udev as: Touchpad
[     2.764] (II) event7  - PIXA3854:00 093A:0274 Touchpad: device is a touchpad
[     2.765] (II) config/udev: Adding input device PIXA3854:00 093A:0274 Mouse (/dev/input/mouse0)
[     2.765] (II) No input driver specified, ignoring this device.
[     2.765] (II) This device may have been added with another device file.
[     2.765] (II) config/udev: Adding input device PIXA3854:00 093A:0274 Touchpad (/dev/input/mouse1)
[     2.765] (II) No input driver specified, ignoring this device.
[     2.765] (II) This device may have been added with another device file.
[     3.322] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse2)
[     3.322] (II) No input driver specified, ignoring this device.
[     3.322] (II) This device may have been added with another device file.
[     3.374] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event22)
[     3.374] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "libinput pointer catchall"
[     3.374] (II) Using input driver 'libinput' for 'ImExPS/2 Generic Explorer Mouse'
[     3.374] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[     3.374] (**) Option "Device" "/dev/input/event22"
[     3.374] (**) Option "_source" "server/udev"
[     3.375] (II) event22 - ImExPS/2 Generic Explorer Mouse: is tagged by udev as: Mouse
[     3.375] (II) event22 - ImExPS/2 Generic Explorer Mouse: device is a pointer
[     3.376] (II) event22 - ImExPS/2 Generic Explorer Mouse: device removed
[     3.442] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event22"
[     3.442] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 14)
[     3.443] (**) Option "AccelerationScheme" "none"
[     3.443] (**) ImExPS/2 Generic Explorer Mouse: (accel) selected scheme none/0
[     3.443] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[     3.443] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[     3.444] (II) event22 - ImExPS/2 Generic Explorer Mouse: is tagged by udev as: Mouse
[     3.444] (II) event22 - ImExPS/2 Generic Explorer Mouse: device is a pointer
[     4.135] (II) config/udev: Adding input device Microsoft Microsoft Wheel Mouse Optical® (/dev/input/mouse3)
[     4.135] (II) No input driver specified, ignoring this device.
[     4.135] (II) This device may have been added with another device file.
[     4.198] (II) config/udev: Adding input device USB Keyboard Consumer Control (/dev/input/event24)
[     4.198] (**) USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[     4.198] (II) Using input driver 'libinput' for 'USB Keyboard Consumer Control'
[     4.198] (**) USB Keyboard Consumer Control: always reports core events
[     4.198] (**) Option "Device" "/dev/input/event24"
[     4.198] (**) Option "_source" "server/udev"
[     4.199] (II) event24 - USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[     4.200] (II) event24 - USB Keyboard Consumer Control: device is a keyboard
[     4.200] (II) event24 - USB Keyboard Consumer Control: device removed
[     4.239] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.3/3-4.3:1.1/0003:04D9:0169.0006/input/input27/event24"
[     4.239] (II) XINPUT: Adding extended input device "USB Keyboard Consumer Control" (type: KEYBOARD, id 15)
[     4.284] (II) event24 - USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[     4.284] (II) event24 - USB Keyboard Consumer Control: device is a keyboard
[     4.285] (II) config/udev: Adding input device USB Keyboard (/dev/input/event23)
[     4.285] (**) USB Keyboard: Applying InputClass "libinput keyboard catchall"
[     4.285] (II) Using input driver 'libinput' for 'USB Keyboard'
[     4.285] (**) USB Keyboard: always reports core events
[     4.285] (**) Option "Device" "/dev/input/event23"
[     4.285] (**) Option "_source" "server/udev"
[     4.286] (II) event23 - USB Keyboard: is tagged by udev as: Keyboard
[     4.286] (II) event23 - USB Keyboard: device is a keyboard
[     4.287] (II) event23 - USB Keyboard: device removed
[     4.336] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.3/3-4.3:1.0/0003:04D9:0169.0005/input/input26/event23"
[     4.336] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 16)
[     4.337] (II) event23 - USB Keyboard: is tagged by udev as: Keyboard
[     4.338] (II) event23 - USB Keyboard: device is a keyboard
[     4.339] (II) config/udev: Adding input device USB Keyboard System Control (/dev/input/event25)
[     4.339] (**) USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[     4.339] (II) Using input driver 'libinput' for 'USB Keyboard System Control'
[     4.339] (**) USB Keyboard System Control: always reports core events
[     4.339] (**) Option "Device" "/dev/input/event25"
[     4.339] (**) Option "_source" "server/udev"
[     4.341] (II) event25 - USB Keyboard System Control: is tagged by udev as: Keyboard
[     4.341] (II) event25 - USB Keyboard System Control: device is a keyboard
[     4.341] (II) event25 - USB Keyboard System Control: device removed
[     4.376] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.3/3-4.3:1.1/0003:04D9:0169.0006/input/input28/event25"
[     4.376] (II) XINPUT: Adding extended input device "USB Keyboard System Control" (type: KEYBOARD, id 17)
[     4.378] (II) event25 - USB Keyboard System Control: is tagged by udev as: Keyboard
[     4.378] (II) event25 - USB Keyboard System Control: device is a keyboard
[     4.379] (II) config/udev: Adding input device Microsoft Microsoft Wheel Mouse Optical® (/dev/input/event26)
[     4.379] (**) Microsoft Microsoft Wheel Mouse Optical®: Applying InputClass "libinput pointer catchall"
[     4.379] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wheel Mouse Optical®'
[     4.379] (**) Microsoft Microsoft Wheel Mouse Optical®: always reports core events
[     4.379] (**) Option "Device" "/dev/input/event26"
[     4.379] (**) Option "_source" "server/udev"
[     4.437] (II) event26 - Microsoft Microsoft Wheel Mouse Optical®: is tagged by udev as: Mouse
[     4.437] (II) event26 - Microsoft Microsoft Wheel Mouse Optical®: device is a pointer
[     4.438] (II) event26 - Microsoft Microsoft Wheel Mouse Optical®: device removed
[     4.509] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.4/3-4.4:1.0/0003:045E:0040.0007/input/input29/event26"
[     4.509] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wheel Mouse Optical®" (type: MOUSE, id 18)
[     4.509] (**) Option "AccelerationScheme" "none"
[     4.509] (**) Microsoft Microsoft Wheel Mouse Optical®: (accel) selected scheme none/0
[     4.509] (**) Microsoft Microsoft Wheel Mouse Optical®: (accel) acceleration factor: 2.000
[     4.509] (**) Microsoft Microsoft Wheel Mouse Optical®: (accel) acceleration threshold: 4
[     4.567] (II) event26 - Microsoft Microsoft Wheel Mouse Optical®: is tagged by udev as: Mouse
[     4.567] (II) event26 - Microsoft Microsoft Wheel Mouse Optical®: device is a pointer
[     4.567] (EE) client bug: timer event7 hold: scheduled expiry is in the past (-63ms), your system is too slow
[    16.032] (II) modeset(0): EDID vendor "BOE", prod id 2399
[    16.032] (II) modeset(0): Printing DDC gathered Modelines:
[    16.032] (II) modeset(0): Modeline "2256x1504"x0.0  235.69  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (92.9 kHz eP)
[    16.032] (II) modeset(0): Modeline "2256x1504"x0.0  188.55  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (74.3 kHz e)
[    16.055] (II) modeset(0): EDID vendor "BOE", prod id 2399
[    16.055] (II) modeset(0): Printing DDC gathered Modelines:
[    16.055] (II) modeset(0): Modeline "2256x1504"x0.0  235.69  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (92.9 kHz eP)
[    16.055] (II) modeset(0): Modeline "2256x1504"x0.0  188.55  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (74.3 kHz e)
[    16.058] (II) modeset(0): EDID vendor "BOE", prod id 2399
[    16.058] (II) modeset(0): Printing DDC gathered Modelines:
[    16.058] (II) modeset(0): Modeline "2256x1504"x0.0  235.69  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (92.9 kHz eP)
[    16.058] (II) modeset(0): Modeline "2256x1504"x0.0  188.55  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (74.3 kHz e)
[    16.122] (II) modeset(0): EDID vendor "BOE", prod id 2399
[    16.122] (II) modeset(0): Printing DDC gathered Modelines:
[    16.122] (II) modeset(0): Modeline "2256x1504"x0.0  235.69  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (92.9 kHz eP)
[    16.122] (II) modeset(0): Modeline "2256x1504"x0.0  188.55  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (74.3 kHz e)
[    16.135] (II) modeset(0): EDID vendor "BOE", prod id 2399
[    16.135] (II) modeset(0): Printing DDC gathered Modelines:
[    16.135] (II) modeset(0): Modeline "2256x1504"x0.0  235.69  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (92.9 kHz eP)
[    16.135] (II) modeset(0): Modeline "2256x1504"x0.0  188.55  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (74.3 kHz e)
[    16.152] (II) modeset(0): EDID vendor "BOE", prod id 2399
[    16.152] (II) modeset(0): Printing DDC gathered Modelines:
[    16.152] (II) modeset(0): Modeline "2256x1504"x0.0  235.69  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (92.9 kHz eP)
[    16.152] (II) modeset(0): Modeline "2256x1504"x0.0  188.55  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (74.3 kHz e)
[    16.700] (II) modeset(0): EDID vendor "BOE", prod id 2399
[    16.700] (II) modeset(0): Printing DDC gathered Modelines:
[    16.700] (II) modeset(0): Modeline "2256x1504"x0.0  235.69  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (92.9 kHz eP)
[    16.700] (II) modeset(0): Modeline "2256x1504"x0.0  188.55  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (74.3 kHz e)
[    94.405] (EE) event23 - USB Keyboard: client bug: event processing lagging behind by 19ms, your system is too slow
[   132.795] (II) modeset(0): EDID vendor "BOE", prod id 2399
[   132.795] (II) modeset(0): Printing DDC gathered Modelines:
[   132.795] (II) modeset(0): Modeline "2256x1504"x0.0  235.69  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (92.9 kHz eP)
[   132.795] (II) modeset(0): Modeline "2256x1504"x0.0  188.55  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (74.3 kHz e)
[   132.853] (--) modeset(0): HDMI max TMDS frequency 300000KHz
[   132.854] (II) config/udev: Adding input device DP-2 (/dev/input/event27)
[   132.854] (**) DP-2: Applying InputClass "libinput keyboard catchall"
[   132.854] (II) Using input driver 'libinput' for 'DP-2'
[   132.854] (**) DP-2: always reports core events
[   132.854] (**) Option "Device" "/dev/input/event27"
[   132.854] (**) Option "_source" "server/udev"
[   132.854] (II) event27 - DP-2: is tagged by udev as: Keyboard Pointingstick
[   132.855] (II) event27 - DP-2: device is a pointer
[   132.855] (II) event27 - DP-2: device is a keyboard
[   132.855] (II) event27 - DP-2: device removed
[   132.896] (II) libinput: DP-2: needs a virtual subdevice
[   132.896] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/rc/rc0/input30/event27"
[   132.896] (II) XINPUT: Adding extended input device "DP-2" (type: MOUSE, id 19)
[   132.897] (**) Option "AccelerationScheme" "none"
[   132.898] (**) DP-2: (accel) selected scheme none/0
[   132.898] (**) DP-2: (accel) acceleration factor: 2.000
[   132.898] (**) DP-2: (accel) acceleration threshold: 4
[   132.900] (II) event27 - DP-2: is tagged by udev as: Keyboard Pointingstick
[   132.900] (II) event27 - DP-2: device is a pointer
[   132.900] (II) event27 - DP-2: device is a keyboard
[   132.906] (II) modeset(0): EDID vendor "BOE", prod id 2399
[   132.906] (II) modeset(0): Printing DDC gathered Modelines:
[   132.906] (II) modeset(0): Modeline "2256x1504"x0.0  235.69  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (92.9 kHz eP)
[   132.906] (II) modeset(0): Modeline "2256x1504"x0.0  188.55  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (74.3 kHz e)
[   132.968] (--) modeset(0): HDMI max TMDS frequency 300000KHz
[   132.968] (**) DP-2: Applying InputClass "libinput keyboard catchall"
[   132.968] (II) Using input driver 'libinput' for 'DP-2'
[   132.968] (**) DP-2: always reports core events
[   132.968] (**) Option "Device" "/dev/input/event27"
[   132.968] (**) Option "_source" "_driver/libinput"
[   132.968] (II) libinput: DP-2: is a virtual subdevice
[   132.968] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/rc/rc0/input30/event27"
[   132.968] (II) XINPUT: Adding extended input device "DP-2" (type: KEYBOARD, id 20)
[   133.262] (II) modeset(0): Allocate new frame buffer 6096x2160 stride
[   135.427] (II) modeset(0): EDID vendor "BOE", prod id 2399
[   135.427] (II) modeset(0): Printing DDC gathered Modelines:
[   135.427] (II) modeset(0): Modeline "2256x1504"x0.0  235.69  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (92.9 kHz eP)
[   135.427] (II) modeset(0): Modeline "2256x1504"x0.0  188.55  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (74.3 kHz e)
[   135.488] (--) modeset(0): HDMI max TMDS frequency 300000KHz
[   135.511] (II) modeset(0): EDID vendor "BOE", prod id 2399
[   135.511] (II) modeset(0): Printing DDC gathered Modelines:
[   135.511] (II) modeset(0): Modeline "2256x1504"x0.0  235.69  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (92.9 kHz eP)
[   135.511] (II) modeset(0): Modeline "2256x1504"x0.0  188.55  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (74.3 kHz e)
[   135.570] (--) modeset(0): HDMI max TMDS frequency 300000KHz
[   144.162] (EE) event26 - Microsoft Microsoft Wheel Mouse Optical®: client bug: event processing lagging behind by 12ms, your system is too slow
[   334.931] (EE) event26 - Microsoft Microsoft Wheel Mouse Optical®: client bug: event processing lagging behind by 13ms, your system is too slow
[   353.819] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-1ms), your system is too slow
[   479.802] (EE) event26 - Microsoft Microsoft Wheel Mouse Optical®: client bug: event processing lagging behind by 52ms, your system is too slow
[   479.803] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-27ms), your system is too slow
[   479.803] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-40ms), your system is too slow
[   552.185] (EE) event26 - Microsoft Microsoft Wheel Mouse Optical®: client bug: event processing lagging behind by 51ms, your system is too slow
[  1381.597] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-0ms), your system is too slow
[  1390.581] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-27ms), your system is too slow
[  1390.581] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-40ms), your system is too slow
[  1479.764] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-18ms), your system is too slow
[  1479.764] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-31ms), your system is too slow
[  1485.281] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-4ms), your system is too slow
[  1491.331] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-1ms), your system is too slow
[  1491.331] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-14ms), your system is too slow
[  1709.614] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-12ms), your system is too slow
[  1709.614] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-25ms), your system is too slow
[  1794.214] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-12ms), your system is too slow
[  1794.214] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-25ms), your system is too slow
[  1842.948] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-10ms), your system is too slow
[  1842.948] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-23ms), your system is too slow
[  1870.758] (EE) event26 - Microsoft Microsoft Wheel Mouse Optical®: client bug: event processing lagging behind by 12ms, your system is too slow
[  1870.758] (EE) event26 - Microsoft Microsoft Wheel Mouse Optical®: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
[  1928.931] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-25ms), your system is too slow
[  1928.931] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-38ms), your system is too slow
[  2011.448] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-22ms), your system is too slow
[  2011.448] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-35ms), your system is too slow
[  2045.498] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-0ms), your system is too slow
[  2045.498] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-13ms), your system is too slow
[  2047.865] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-14ms), your system is too slow
[  2047.865] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-27ms), your system is too slow
[  2141.613] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-1ms), your system is too slow
[  2174.263] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-6ms), your system is too slow
[  2174.263] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-20ms), your system is too slow
[  2229.797] (II) modeset(0): EDID vendor "BOE", prod id 2399
[  2229.797] (II) modeset(0): Printing DDC gathered Modelines:
[  2229.797] (II) modeset(0): Modeline "2256x1504"x0.0  235.69  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (92.9 kHz eP)
[  2229.797] (II) modeset(0): Modeline "2256x1504"x0.0  188.55  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (74.3 kHz e)
[  2229.854] (--) modeset(0): HDMI max TMDS frequency 300000KHz
[  2251.589] (II) modeset(0): EDID vendor "BOE", prod id 2399
[  2251.589] (II) modeset(0): Printing DDC gathered Modelines:
[  2251.589] (II) modeset(0): Modeline "2256x1504"x0.0  235.69  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (92.9 kHz eP)
[  2251.589] (II) modeset(0): Modeline "2256x1504"x0.0  188.55  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (74.3 kHz e)
[  2251.645] (--) modeset(0): HDMI max TMDS frequency 300000KHz
[  2282.154] (II) modeset(0): EDID vendor "BOE", prod id 2399
[  2282.154] (II) modeset(0): Printing DDC gathered Modelines:
[  2282.154] (II) modeset(0): Modeline "2256x1504"x0.0  235.69  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (92.9 kHz eP)
[  2282.154] (II) modeset(0): Modeline "2256x1504"x0.0  188.55  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (74.3 kHz e)
[  2282.211] (--) modeset(0): HDMI max TMDS frequency 300000KHz
[  2355.695] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-16ms), your system is too slow
[  2355.695] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-29ms), your system is too slow
[  2757.476] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-7ms), your system is too slow
[  2757.476] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-20ms), your system is too slow
[  2773.442] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-14ms), your system is too slow
[  2773.442] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-27ms), your system is too slow
[  2852.892] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-16ms), your system is too slow
[  2852.892] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-29ms), your system is too slow
[  2908.992] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-4ms), your system is too slow
[  2908.992] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-17ms), your system is too slow
[  3184.025] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-14ms), your system is too slow
[  3184.025] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-27ms), your system is too slow
[  3197.908] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-1ms), your system is too slow
[  3197.908] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-14ms), your system is too slow
[  3260.090] (EE) event23 - USB Keyboard: client bug: event processing lagging behind by 31ms, your system is too slow
[  3328.900] (II) modeset(0): EDID vendor "BOE", prod id 2399
[  3328.900] (II) modeset(0): Printing DDC gathered Modelines:
[  3328.900] (II) modeset(0): Modeline "2256x1504"x0.0  235.69  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (92.9 kHz eP)
[  3328.900] (II) modeset(0): Modeline "2256x1504"x0.0  188.55  2256 2304 2336 2536  1504 1507 1513 1549 +hsync -vsync (74.3 kHz e)
[  3328.959] (--) modeset(0): HDMI max TMDS frequency 300000KHz
[  3357.575] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-20ms), your system is too slow
[  3357.575] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-33ms), your system is too slow
[  3362.959] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-28ms), your system is too slow
[  3362.959] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-41ms), your system is too slow
[  3483.308] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-25ms), your system is too slow
[  3483.308] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-38ms), your system is too slow

Offline

#2 2021-11-08 07:21:00

seth
Member
Registered: 2012-09-03
Posts: 26,239

Re: Poor Video Playback -- High "Render/3D" Intel GPU Usage

I'd first and foremost drop cinnamon and try openbox to rule out that the actual stall is in the compositor.

Offline

#3 2021-11-08 18:31:48

blarq
Member
Registered: 2021-11-07
Posts: 3

Re: Poor Video Playback -- High "Render/3D" Intel GPU Usage

Thanks for the reply!

I removed cinnamon and installed openbox (without any DE on top) and the CPU/GPU use was the same.

I did notice that shrinking the video window reduced the GPU use--not a surprise necessarily but more information.

I did also try all the options in cinnamon for "disable compositing for full-screen windows" and "VSync method" and these made no difference.

So this seems to suggest it isn't the compositor if I understand correctly.

Offline

#4 2021-11-08 22:42:20

seth
Member
Registered: 2012-09-03
Posts: 26,239

Re: Poor Video Playback -- High "Render/3D" Intel GPU Usage

If you face the same situation w/ the uncomposited openbox, the muffin compositor won't be the problem, no.

You could try to
https://wiki.archlinux.org/title/Intel_ … on_(VSYNC)
but if the window size impacts the render/3d load (significantly) I'm not too optimistic for that.

Then there's
https://wiki.archlinux.org/title/Intel_ … ver_(i965)

and ulitmately
https://wiki.archlinux.org/title/Intel_ … RI3_issues

On a stretch,
https://wiki.archlinux.org/title/Intel_ … nable_fbc)
might help

Offline

#5 2021-11-09 03:01:06

blarq
Member
Registered: 2021-11-07
Posts: 3

Re: Poor Video Playback -- High "Render/3D" Intel GPU Usage

Ok, I had tried some of these before posting and tried them all again just in case.

Disable VSYNC - No effect
i965 Driver - Video playback broken, cinnamon reports it's using software rendering. I believe I read somewhere the i965 driver is not compatible with 11+ gen intel GPUs, though I could be wrong. Either way a step backwards just following the instructions on the wiki.
Disable DRI3 - This may have had a small improvement, but still nowhere near being able to playback 4k 60fps video. I may have imagined any perceived difference.
Enable fbc - No effect

I've also tried this with no effect: https://wiki.archlinux.org/title/Intel_graphics#Tearing
And changing the "AccelMethod" to UXA (https://wiki.archlinux.org/title/Intel_graphics#Xorg_configuration ), which again caused problems. This may be because it requires the xf86-video-intel driver to be loaded (?), so I could try that combination.

Either way, so far no dice. Thanks again for the suggestions.

Offline

Board footer

Powered by FluxBB