Xorg Segmentation Fault

bjornp_ · 2021-12-14 17:23:48

When launching Minecraft through MultiMC, I get a segmentation fault in Xorg. Logs below

[    85.851] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[    85.851] 
X.Org X Server 1.21.1.1
X Protocol Version 11, Revision 0
[    85.851] Current Operating System: Linux L340-arch 5.10.84-1-lts #1 SMP Wed, 08 Dec 2021 10:17:01 +0000 x86_64
[    85.851] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=f7a077f2-463b-4b50-8c94-ce8a5494491d rw consoleblank=0 nvidia-drm.modeset=1
[    85.851]  
[    85.851] Current version of pixman: 0.40.0
[    85.851] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    85.851] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    85.851] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 14 18:16:32 2021
[    85.851] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    85.851] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    85.851] (==) No Layout section.  Using the first Screen section.
[    85.851] (==) No screen section available. Using defaults.
[    85.851] (**) |-->Screen "Default Screen Section" (0)
[    85.851] (**) |   |-->Monitor "<default monitor>"
[    85.851] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    85.851] (==) Automatically adding devices
[    85.851] (==) Automatically enabling devices
[    85.851] (==) Automatically adding GPU devices
[    85.851] (==) Automatically binding GPU devices
[    85.851] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    85.851] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    85.851] 	Entry deleted from font path.
[    85.851] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    85.851] 	Entry deleted from font path.
[    85.851] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1
[    85.851] (==) ModulePath set to "/usr/lib/xorg/modules"
[    85.851] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    85.851] (II) Module ABI versions:
[    85.851] 	X.Org ANSI C Emulation: 0.4
[    85.851] 	X.Org Video Driver: 25.2
[    85.851] 	X.Org XInput driver : 24.4
[    85.851] 	X.Org Server Extension : 10.0
[    85.852] (++) using VT number 7

[    85.852] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    85.852] (II) xfree86: Adding drm device (/dev/dri/card1)
[    85.852] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[    85.945] (II) xfree86: Adding drm device (/dev/dri/card0)
[    85.945] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[    85.952] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[    85.952] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[    85.952] (**) OutputClass "nvidia" setting /dev/dri/card1 as PrimaryGPU
[    85.953] (--) PCI: (0@0:2:0) 8086:3e9b:17aa:3a2e rev 0, Mem @ 0xa2000000/16777216, 0xb0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[    85.953] (--) PCI:*(1@0:0:0) 10de:1f91:17aa:3a2e rev 161, Mem @ 0xa3000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[    85.953] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    85.953] (II) LoadModule: "glx"
[    85.953] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    85.955] (II) Module glx: vendor="X.Org Foundation"
[    85.955] 	compiled for 1.21.1.1, module version = 1.0.0
[    85.955] 	ABI class: X.Org Server Extension, version 10.0
[    85.955] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[    85.955] 	loading driver: nvidia
[    85.955] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[    85.955] 	loading driver: nvidia
[    85.955] (II) Applying OutputClass "intel" to /dev/dri/card0
[    85.955] 	loading driver: modesetting
[    85.955] (==) Matched nvidia as autoconfigured driver 0
[    85.955] (==) Matched nouveau as autoconfigured driver 1
[    85.955] (==) Matched nv as autoconfigured driver 2
[    85.955] (==) Matched modesetting as autoconfigured driver 3
[    85.955] (==) Matched intel as autoconfigured driver 4
[    85.955] (==) Matched fbdev as autoconfigured driver 5
[    85.955] (==) Matched vesa as autoconfigured driver 6
[    85.955] (==) Assigned the driver to the xf86ConfigLayout
[    85.955] (II) LoadModule: "nvidia"
[    85.955] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    85.955] (II) Module nvidia: vendor="NVIDIA Corporation"
[    85.955] 	compiled for 1.6.99.901, module version = 1.0.0
[    85.955] 	Module class: X.Org Video Driver
[    85.955] (II) LoadModule: "nouveau"
[    85.955] (WW) Warning, couldn't open module nouveau
[    85.955] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    85.955] (II) LoadModule: "nv"
[    85.956] (WW) Warning, couldn't open module nv
[    85.956] (EE) Failed to load module "nv" (module does not exist, 0)
[    85.956] (II) LoadModule: "modesetting"
[    85.956] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    85.959] (II) Module modesetting: vendor="X.Org Foundation"
[    85.959] 	compiled for 1.21.1.1, module version = 1.21.1
[    85.959] 	Module class: X.Org Video Driver
[    85.959] 	ABI class: X.Org Video Driver, version 25.2
[    85.959] (II) LoadModule: "intel"
[    85.959] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    85.960] (II) Module intel: vendor="X.Org Foundation"
[    85.960] 	compiled for 1.21.1.1, module version = 2.99.917
[    85.960] 	Module class: X.Org Video Driver
[    85.960] 	ABI class: X.Org Video Driver, version 25.2
[    85.960] (II) LoadModule: "fbdev"
[    85.960] (WW) Warning, couldn't open module fbdev
[    85.960] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    85.960] (II) LoadModule: "vesa"
[    85.960] (WW) Warning, couldn't open module vesa
[    85.960] (EE) Failed to load module "vesa" (module does not exist, 0)
[    85.960] (II) NVIDIA dlloader X Driver  495.46  Wed Oct 27 16:28:42 UTC 2021
[    85.960] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    85.960] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    85.960] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    85.960] (II) intel: Driver for Intel(R) HD Graphics
[    85.960] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    85.960] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    85.961] (II) Loading sub module "fb"
[    85.961] (II) LoadModule: "fb"
[    85.961] (II) Module "fb" already built-in
[    85.961] (II) Loading sub module "wfb"
[    85.961] (II) LoadModule: "wfb"
[    85.961] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    85.961] (II) Module wfb: vendor="X.Org Foundation"
[    85.961] 	compiled for 1.21.1.1, module version = 1.0.0
[    85.961] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    85.961] (II) Loading sub module "ramdac"
[    85.961] (II) LoadModule: "ramdac"
[    85.961] (II) Module "ramdac" already built-in
[    85.961] (WW) Falling back to old probe method for modesetting
[    85.984] (II) modeset(G0): using drv /dev/dri/card0
[    85.984] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    85.984] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    85.984] (==) NVIDIA(0): RGB weight 888
[    85.984] (==) NVIDIA(0): Default visual is TrueColor
[    85.984] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    85.984] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[    85.984] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[    85.984] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[    85.984] (**) NVIDIA(0): Enabling 2D acceleration
[    85.984] (II) Loading sub module "glxserver_nvidia"
[    85.984] (II) LoadModule: "glxserver_nvidia"
[    85.985] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[    85.992] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[    85.992] 	compiled for 1.6.99.901, module version = 1.0.0
[    85.992] 	Module class: X.Org Server Extension
[    85.992] (II) NVIDIA GLX Module  495.46  Wed Oct 27 16:26:03 UTC 2021
[    85.992] (II) NVIDIA: The X server supports PRIME Render Offload.
[    85.993] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[    85.993] (--) NVIDIA(0):     DFP-0
[    85.993] (--) NVIDIA(0):     DFP-1
[    85.993] (--) NVIDIA(0):     DFP-2 (boot)
[    85.994] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce GTX 1650 (TU117-A) at PCI:1:0:0
[    85.994] (II) NVIDIA(0):     (GPU-0)
[    85.994] (--) NVIDIA(0): Memory: 4194304 kBytes
[    85.994] (--) NVIDIA(0): VideoBIOS: 90.17.1c.00.6f
[    85.994] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    85.994] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    85.994] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[    85.994] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[    85.994] (--) NVIDIA(GPU-0): 
[    86.017] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    86.017] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    86.017] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    86.017] (--) NVIDIA(GPU-0): 
[    86.061] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[    86.061] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[    86.061] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[    86.061] (--) NVIDIA(GPU-0): 
[    86.127] (==) NVIDIA(0): 
[    86.127] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    86.127] (==) NVIDIA(0):     will be used as the requested mode.
[    86.127] (==) NVIDIA(0): 
[    86.130] (II) NVIDIA(0): Validated MetaModes:
[    86.130] (II) NVIDIA(0):     "DFP-2:nvidia-auto-select"
[    86.130] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    86.210] (--) NVIDIA(0): DPI set to (81, 80); computed from "UseEdidDpi" X config
[    86.210] (--) NVIDIA(0):     option
[    86.210] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[    86.210] (==) modeset(G0): RGB weight 888
[    86.210] (==) modeset(G0): Default visual is TrueColor
[    86.210] (II) Loading sub module "glamoregl"
[    86.210] (II) LoadModule: "glamoregl"
[    86.210] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    86.215] (II) Module glamoregl: vendor="X.Org Foundation"
[    86.215] 	compiled for 1.21.1.1, module version = 1.0.1
[    86.215] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    86.255] (II) modeset(G0): glamor X acceleration enabled on Mesa Intel(R) UHD Graphics 630 (CFL GT2)
[    86.255] (II) modeset(G0): glamor initialized
[    86.256] (II) modeset(G0): Output eDP-1-1 has no monitor section
[    86.257] (II) modeset(G0): EDID for output eDP-1-1
[    86.257] (II) modeset(G0): Manufacturer: CMN  Model: 15e7  Serial#: 0
[    86.257] (II) modeset(G0): Year: 2016  Week: 33
[    86.257] (II) modeset(G0): EDID Version: 1.4
[    86.257] (II) modeset(G0): Digital Display Input
[    86.257] (II) modeset(G0): 8 bits per channel
[    86.257] (II) modeset(G0): Digital interface is DisplayPort
[    86.257] (II) modeset(G0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    86.257] (II) modeset(G0): Gamma: 2.20
[    86.257] (II) modeset(G0): No DPMS capabilities specified
[    86.257] (II) modeset(G0): Supported color encodings: RGB 4:4:4 
[    86.257] (II) modeset(G0): First detailed timing is preferred mode
[    86.257] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[    86.257] (II) modeset(G0): redX: 0.590 redY: 0.350   greenX: 0.330 greenY: 0.555
[    86.257] (II) modeset(G0): blueX: 0.153 blueY: 0.119   whiteX: 0.313 whiteY: 0.329
[    86.257] (II) modeset(G0): Manufacturer's mask: 0
[    86.257] (II) modeset(G0): Supported detailed timing:
[    86.257] (II) modeset(G0): clock: 152.8 MHz   Image Size:  344 x 193 mm
[    86.257] (II) modeset(G0): h_active: 1920  h_sync: 2000  h_sync_end 2054 h_blank_end 2250 h_border: 0
[    86.257] (II) modeset(G0): v_active: 1080  v_sync: 1086  v_sync_end 1094 v_blanking: 1132 v_border: 0
[    86.257] (II) modeset(G0):  N156HCA-EAB
[    86.257] (II) modeset(G0):  CMN
[    86.257] (II) modeset(G0):  N156HCA-EAB
[    86.257] (II) modeset(G0): EDID (in hex):
[    86.257] (II) modeset(G0): 	00ffffffffffff000daee71500000000
[    86.257] (II) modeset(G0): 	211a0104a52213780228659759548e27
[    86.257] (II) modeset(G0): 	1e505400000001010101010101010101
[    86.257] (II) modeset(G0): 	010101010101b43b804a713834405036
[    86.257] (II) modeset(G0): 	680058c110000018000000fe004e3135
[    86.257] (II) modeset(G0): 	364843412d4541420a20000000fe0043
[    86.257] (II) modeset(G0): 	4d4e0a202020202020202020000000fe
[    86.257] (II) modeset(G0): 	004e3135364843412d4541420a2000b2
[    86.257] (II) modeset(G0): Printing probed modes for output eDP-1-1
[    86.257] (II) modeset(G0): Modeline "1920x1080"x60.0  152.84  1920 2000 2054 2250  1080 1086 1094 1132 -hsync -vsync (67.9 kHz eP)
[    86.257] (II) modeset(G0): Modeline "1920x1080"x120.0  356.38  1920 2080 2288 2656  1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[    86.257] (II) modeset(G0): Modeline "1920x1080"x119.9  266.50  1920 1944 1960 2000  1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[    86.257] (II) modeset(G0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[    86.257] (II) modeset(G0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[    86.257] (II) modeset(G0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    86.257] (II) modeset(G0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[    86.257] (II) modeset(G0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    86.257] (II) modeset(G0): Modeline "1600x900"x120.0  246.00  1600 1728 1900 2200  900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[    86.257] (II) modeset(G0): Modeline "1600x900"x119.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[    86.257] (II) modeset(G0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[    86.257] (II) modeset(G0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[    86.257] (II) modeset(G0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    86.257] (II) modeset(G0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[    86.257] (II) modeset(G0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[    86.257] (II) modeset(G0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    86.257] (II) modeset(G0): Modeline "1440x810"x120.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[    86.257] (II) modeset(G0): Modeline "1440x810"x119.9  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[    86.257] (II) modeset(G0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[    86.257] (II) modeset(G0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[    86.257] (II) modeset(G0): Modeline "1280x800"x120.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[    86.257] (II) modeset(G0): Modeline "1280x800"x119.9  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[    86.257] (II) modeset(G0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[    86.257] (II) modeset(G0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[    86.257] (II) modeset(G0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[    86.257] (II) modeset(G0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    86.257] (II) modeset(G0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    86.257] (II) modeset(G0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    86.257] (II) modeset(G0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    86.257] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    86.257] (II) modeset(G0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    86.258] (II) modeset(G0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    86.258] (II) modeset(G0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    86.258] (II) modeset(G0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    86.258] (II) modeset(G0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    86.258] (II) modeset(G0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    86.258] (II) modeset(G0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    86.258] (II) modeset(G0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    86.258] (II) modeset(G0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    86.258] (II) modeset(G0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    86.258] (II) modeset(G0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    86.258] (II) modeset(G0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    86.258] (II) modeset(G0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    86.258] (II) modeset(G0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    86.258] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    86.258] (II) modeset(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    86.258] (II) modeset(G0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    86.258] (II) modeset(G0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    86.258] (II) modeset(G0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    86.258] (II) modeset(G0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    86.258] (II) modeset(G0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    86.258] (II) modeset(G0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    86.258] (II) modeset(G0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    86.258] (II) modeset(G0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    86.258] (II) modeset(G0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    86.258] (II) modeset(G0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    86.258] (II) modeset(G0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    86.258] (II) modeset(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    86.258] (II) modeset(G0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    86.258] (II) modeset(G0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    86.258] (II) modeset(G0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    86.258] (II) modeset(G0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    86.258] (II) modeset(G0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    86.258] (II) modeset(G0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    86.258] (II) modeset(G0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    86.258] (II) modeset(G0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    86.258] (II) modeset(G0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    86.258] (II) modeset(G0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    86.258] (II) modeset(G0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    86.258] (II) modeset(G0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    86.258] (II) modeset(G0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    86.258] (II) modeset(G0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    86.258] (II) modeset(G0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    86.258] (II) modeset(G0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    86.258] (II) modeset(G0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    86.258] (II) modeset(G0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    86.258] (II) modeset(G0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    86.258] (II) modeset(G0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    86.258] (II) modeset(G0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    86.258] (II) modeset(G0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    86.258] (II) modeset(G0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    86.258] (II) modeset(G0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    86.258] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[    86.258] (==) modeset(G0): DPI set to (96, 96)
[    86.258] (II) Loading sub module "fb"
[    86.258] (II) LoadModule: "fb"
[    86.258] (II) Module "fb" already built-in
[    86.258] (II) UnloadModule: "intel"
[    86.258] (II) Unloading intel
[    86.258] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[    86.258] (II) NVIDIA:     access.
[    86.276] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    86.276] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    86.276] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    86.276] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    86.276] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    86.276] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    86.276] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    86.276] (II) NVIDIA(0):     Config Options in the README.
[    86.304] (II) NVIDIA(0): Setting mode "DFP-2:nvidia-auto-select"
[    86.402] (==) NVIDIA(0): Disabling shared memory pixmaps
[    86.402] (==) NVIDIA(0): Backing store enabled
[    86.402] (==) NVIDIA(0): Silken mouse enabled
[    86.402] (==) NVIDIA(0): DPMS enabled
[    86.403] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[    86.403] (II) Loading sub module "dri2"
[    86.403] (II) LoadModule: "dri2"
[    86.403] (II) Module "dri2" already built-in
[    86.403] (II) NVIDIA(0): [DRI2] Setup complete
[    86.403] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    86.411] (==) modeset(G0): Backing store enabled
[    86.411] (==) modeset(G0): Silken mouse enabled
[    86.484] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[    86.484] (==) modeset(G0): DPMS enabled
[    86.485] (II) modeset(G0): [DRI2] Setup complete
[    86.485] (II) modeset(G0): [DRI2]   DRI driver: iris
[    86.485] (II) modeset(G0): [DRI2]   VDPAU driver: va_gl
[    86.485] (II) modeset(G0): Disable reverse prime offload mode for i915.
[    86.485] (II) Initializing extension Generic Event Extension
[    86.485] (II) Initializing extension SHAPE
[    86.485] (II) Initializing extension MIT-SHM
[    86.485] (II) Initializing extension XInputExtension
[    86.485] (II) Initializing extension XTEST
[    86.485] (II) Initializing extension BIG-REQUESTS
[    86.485] (II) Initializing extension SYNC
[    86.485] (II) Initializing extension XKEYBOARD
[    86.486] (II) Initializing extension XC-MISC
[    86.486] (II) Initializing extension SECURITY
[    86.486] (II) Initializing extension XFIXES
[    86.486] (II) Initializing extension RENDER
[    86.486] (II) Initializing extension RANDR
[    86.486] (II) Initializing extension COMPOSITE
[    86.486] (II) Initializing extension DAMAGE
[    86.486] (II) Initializing extension MIT-SCREEN-SAVER
[    86.486] (II) Initializing extension DOUBLE-BUFFER
[    86.486] (II) Initializing extension RECORD
[    86.487] (II) Initializing extension DPMS
[    86.487] (II) Initializing extension Present
[    86.487] (II) Initializing extension DRI3
[    86.487] (II) Initializing extension X-Resource
[    86.487] (II) Initializing extension XVideo
[    86.487] (II) Initializing extension XVideo-MotionCompensation
[    86.487] (II) Initializing extension GLX
[    86.487] (II) Initializing extension GLX
[    86.487] (II) Indirect GLX disabled.
[    86.487] (II) GLX: Another vendor is already registered for screen 0
[    86.487] (II) Initializing extension XFree86-VidModeExtension
[    86.487] (II) Initializing extension XFree86-DGA
[    86.487] (II) Initializing extension XFree86-DRI
[    86.487] (II) Initializing extension DRI2
[    86.488] (II) Initializing extension NV-GLX
[    86.488] (II) Initializing extension NV-CONTROL
[    86.488] (II) Initializing extension XINERAMA
[    86.773] (II) modeset(G0): Damage tracking initialized
[    86.825] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    86.825] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    86.825] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    86.825] (II) LoadModule: "libinput"
[    86.825] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    86.827] (II) Module libinput: vendor="X.Org Foundation"
[    86.827] 	compiled for 1.21.1, module version = 1.2.0
[    86.827] 	Module class: X.Org XInput Driver
[    86.827] 	ABI class: X.Org XInput driver, version 24.4
[    86.827] (II) Using input driver 'libinput' for 'Video Bus'
[    86.827] (**) Video Bus: always reports core events
[    86.827] (**) Option "Device" "/dev/input/event6"
[    86.827] (**) Option "_source" "server/udev"
[    86.829] (II) event6  - Video Bus: is tagged by udev as: Keyboard
[    86.829] (II) event6  - Video Bus: device is a keyboard
[    86.829] (II) event6  - Video Bus: device removed
[    86.965] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7/event6"
[    86.965] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[    86.966] (II) event6  - Video Bus: is tagged by udev as: Keyboard
[    86.966] (II) event6  - Video Bus: device is a keyboard
[    86.966] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    86.966] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    86.966] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    86.966] (II) Using input driver 'libinput' for 'Video Bus'
[    86.966] (**) Video Bus: always reports core events
[    86.966] (**) Option "Device" "/dev/input/event5"
[    86.966] (**) Option "_source" "server/udev"
[    86.967] (II) event5  - Video Bus: is tagged by udev as: Keyboard
[    86.967] (II) event5  - Video Bus: device is a keyboard
[    86.967] (II) event5  - Video Bus: device removed
[    87.045] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6/event5"
[    87.045] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    87.046] (II) event5  - Video Bus: is tagged by udev as: Keyboard
[    87.046] (II) event5  - Video Bus: device is a keyboard
[    87.046] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    87.046] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    87.046] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    87.046] (II) Using input driver 'libinput' for 'Power Button'
[    87.046] (**) Power Button: always reports core events
[    87.046] (**) Option "Device" "/dev/input/event1"
[    87.046] (**) Option "_source" "server/udev"
[    87.047] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    87.047] (II) event1  - Power Button: device is a keyboard
[    87.047] (II) event1  - Power Button: device removed
[    87.085] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    87.085] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    87.086] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    87.086] (II) event1  - Power Button: device is a keyboard
[    87.086] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    87.086] (II) No input driver specified, ignoring this device.
[    87.086] (II) This device may have been added with another device file.
[    87.087] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event9)
[    87.087] (II) No input driver specified, ignoring this device.
[    87.087] (II) This device may have been added with another device file.
[    87.087] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event10)
[    87.087] (II) No input driver specified, ignoring this device.
[    87.087] (II) This device may have been added with another device file.
[    87.088] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event7)
[    87.088] (II) No input driver specified, ignoring this device.
[    87.088] (II) This device may have been added with another device file.
[    87.088] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event8)
[    87.088] (II) No input driver specified, ignoring this device.
[    87.088] (II) This device may have been added with another device file.
[    87.089] (II) config/udev: Adding input device Audient Audient iD44 (/dev/input/event22)
[    87.089] (**) Audient Audient iD44: Applying InputClass "libinput pointer catchall"
[    87.089] (**) Audient Audient iD44: Applying InputClass "libinput pointer catchall"
[    87.089] (II) Using input driver 'libinput' for 'Audient Audient iD44'
[    87.089] (**) Audient Audient iD44: always reports core events
[    87.089] (**) Option "Device" "/dev/input/event22"
[    87.089] (**) Option "_source" "server/udev"
[    87.156] (II) event22 - Audient Audient iD44: is tagged by udev as: Mouse
[    87.156] (II) event22 - Audient Audient iD44: device is a pointer
[    87.156] (II) event22 - Audient Audient iD44: device removed
[    87.235] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.4/0003:2708:0005.0005/input/input25/event22"
[    87.235] (II) XINPUT: Adding extended input device "Audient Audient iD44" (type: MOUSE, id 9)
[    87.235] (**) Option "AccelerationScheme" "none"
[    87.235] (**) Audient Audient iD44: (accel) selected scheme none/0
[    87.235] (**) Audient Audient iD44: (accel) acceleration factor: 2.000
[    87.235] (**) Audient Audient iD44: (accel) acceleration threshold: 4
[    87.306] (II) event22 - Audient Audient iD44: is tagged by udev as: Mouse
[    87.306] (II) event22 - Audient Audient iD44: device is a pointer
[    87.307] (II) config/udev: Adding input device Audient Audient iD44 (/dev/input/mouse2)
[    87.307] (II) No input driver specified, ignoring this device.
[    87.307] (II) This device may have been added with another device file.
[    87.307] (II) config/udev: Adding input device Full HD webcam: Full HD webcam (/dev/input/event27)
[    87.307] (**) Full HD webcam: Full HD webcam: Applying InputClass "libinput keyboard catchall"
[    87.307] (**) Full HD webcam: Full HD webcam: Applying InputClass "libinput keyboard catchall"
[    87.307] (II) Using input driver 'libinput' for 'Full HD webcam: Full HD webcam'
[    87.307] (**) Full HD webcam: Full HD webcam: always reports core events
[    87.307] (**) Option "Device" "/dev/input/event27"
[    87.307] (**) Option "_source" "server/udev"
[    87.309] (II) event27 - Full HD webcam: Full HD webcam: is tagged by udev as: Keyboard
[    87.309] (II) event27 - Full HD webcam: Full HD webcam: device is a keyboard
[    87.309] (II) event27 - Full HD webcam: Full HD webcam: device removed
[    87.385] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/input/input30/event27"
[    87.385] (II) XINPUT: Adding extended input device "Full HD webcam: Full HD webcam" (type: KEYBOARD, id 10)
[    87.386] (II) event27 - Full HD webcam: Full HD webcam: is tagged by udev as: Keyboard
[    87.386] (II) event27 - Full HD webcam: Full HD webcam: device is a keyboard
[    87.387] (II) config/udev: Adding input device HID Keyboard HID Keyboard (/dev/input/event23)
[    87.387] (**) HID Keyboard HID Keyboard: Applying InputClass "libinput keyboard catchall"
[    87.387] (**) HID Keyboard HID Keyboard: Applying InputClass "libinput keyboard catchall"
[    87.387] (II) Using input driver 'libinput' for 'HID Keyboard HID Keyboard'
[    87.387] (**) HID Keyboard HID Keyboard: always reports core events
[    87.387] (**) Option "Device" "/dev/input/event23"
[    87.387] (**) Option "_source" "server/udev"
[    87.388] (II) event23 - HID Keyboard HID Keyboard: is tagged by udev as: Keyboard
[    87.388] (II) event23 - HID Keyboard HID Keyboard: device is a keyboard
[    87.389] (II) event23 - HID Keyboard HID Keyboard: device removed
[    87.425] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:04B4:0510.0006/input/input26/event23"
[    87.425] (II) XINPUT: Adding extended input device "HID Keyboard HID Keyboard" (type: KEYBOARD, id 11)
[    87.426] (II) event23 - HID Keyboard HID Keyboard: is tagged by udev as: Keyboard
[    87.426] (II) event23 - HID Keyboard HID Keyboard: device is a keyboard
[    87.427] (II) config/udev: Adding input device HID Keyboard HID Keyboard (/dev/input/event25)
[    87.427] (**) HID Keyboard HID Keyboard: Applying InputClass "libinput keyboard catchall"
[    87.427] (**) HID Keyboard HID Keyboard: Applying InputClass "libinput keyboard catchall"
[    87.427] (II) Using input driver 'libinput' for 'HID Keyboard HID Keyboard'
[    87.427] (**) HID Keyboard HID Keyboard: always reports core events
[    87.427] (**) Option "Device" "/dev/input/event25"
[    87.427] (**) Option "_source" "server/udev"
[    87.429] (II) event25 - HID Keyboard HID Keyboard: is tagged by udev as: Keyboard
[    87.429] (II) event25 - HID Keyboard HID Keyboard: device is a keyboard
[    87.429] (II) event25 - HID Keyboard HID Keyboard: device removed
[    87.505] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:04B4:0510.0007/input/input28/event25"
[    87.505] (II) XINPUT: Adding extended input device "HID Keyboard HID Keyboard" (type: KEYBOARD, id 12)
[    87.506] (II) event25 - HID Keyboard HID Keyboard: is tagged by udev as: Keyboard
[    87.506] (II) event25 - HID Keyboard HID Keyboard: device is a keyboard
[    87.507] (II) config/udev: Adding input device HID Keyboard HID Keyboard Consumer Control (/dev/input/event26)
[    87.507] (**) HID Keyboard HID Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    87.507] (**) HID Keyboard HID Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    87.507] (II) Using input driver 'libinput' for 'HID Keyboard HID Keyboard Consumer Control'
[    87.507] (**) HID Keyboard HID Keyboard Consumer Control: always reports core events
[    87.507] (**) Option "Device" "/dev/input/event26"
[    87.507] (**) Option "_source" "server/udev"
[    87.509] (II) event26 - HID Keyboard HID Keyboard Consumer Control: is tagged by udev as: Keyboard
[    87.509] (II) event26 - HID Keyboard HID Keyboard Consumer Control: device is a keyboard
[    87.509] (II) event26 - HID Keyboard HID Keyboard Consumer Control: device removed
[    87.545] (II) libinput: HID Keyboard HID Keyboard Consumer Control: needs a virtual subdevice
[    87.545] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:04B4:0510.0007/input/input29/event26"
[    87.545] (II) XINPUT: Adding extended input device "HID Keyboard HID Keyboard Consumer Control" (type: MOUSE, id 13)
[    87.545] (**) Option "AccelerationScheme" "none"
[    87.545] (**) HID Keyboard HID Keyboard Consumer Control: (accel) selected scheme none/0
[    87.545] (**) HID Keyboard HID Keyboard Consumer Control: (accel) acceleration factor: 2.000
[    87.545] (**) HID Keyboard HID Keyboard Consumer Control: (accel) acceleration threshold: 4
[    87.546] (II) event26 - HID Keyboard HID Keyboard Consumer Control: is tagged by udev as: Keyboard
[    87.546] (II) event26 - HID Keyboard HID Keyboard Consumer Control: device is a keyboard
[    87.547] (II) config/udev: Adding input device Logitech G604  (/dev/input/event18)
[    87.547] (**) Logitech G604 : Applying InputClass "libinput pointer catchall"
[    87.547] (**) Logitech G604 : Applying InputClass "libinput keyboard catchall"
[    87.547] (**) Logitech G604 : Applying InputClass "libinput pointer catchall"
[    87.547] (**) Logitech G604 : Applying InputClass "libinput keyboard catchall"
[    87.547] (II) Using input driver 'libinput' for 'Logitech G604 '
[    87.547] (**) Logitech G604 : always reports core events
[    87.547] (**) Option "Device" "/dev/input/event18"
[    87.547] (**) Option "_source" "server/udev"
[    87.549] (II) event18 - Logitech G604 : is tagged by udev as: Keyboard Mouse
[    87.549] (II) event18 - Logitech G604 : device is a pointer
[    87.549] (II) event18 - Logitech G604 : device is a keyboard
[    87.549] (II) event18 - Logitech G604 : device removed
[    87.585] (II) libinput: Logitech G604 : needs a virtual subdevice
[    87.585] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C539.0004/0003:046D:4085.0008/input/input36/event18"
[    87.585] (II) XINPUT: Adding extended input device "Logitech G604 " (type: MOUSE, id 14)
[    87.585] (**) Option "AccelerationScheme" "none"
[    87.585] (**) Logitech G604 : (accel) selected scheme none/0
[    87.585] (**) Logitech G604 : (accel) acceleration factor: 2.000
[    87.585] (**) Logitech G604 : (accel) acceleration threshold: 4
[    87.586] (II) event18 - Logitech G604 : is tagged by udev as: Keyboard Mouse
[    87.586] (II) event18 - Logitech G604 : device is a pointer
[    87.586] (II) event18 - Logitech G604 : device is a keyboard
[    87.587] (II) config/udev: Adding input device Logitech G604  (/dev/input/mouse1)
[    87.587] (II) No input driver specified, ignoring this device.
[    87.587] (II) This device may have been added with another device file.
[    87.588] (II) config/udev: Adding input device Integrated Camera: Integrated C (/dev/input/event24)
[    87.588] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"
[    87.588] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"
[    87.588] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated C'
[    87.588] (**) Integrated Camera: Integrated C: always reports core events
[    87.588] (**) Option "Device" "/dev/input/event24"
[    87.588] (**) Option "_source" "server/udev"
[    87.589] (II) event24 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[    87.589] (II) event24 - Integrated Camera: Integrated C: device is a keyboard
[    87.589] (II) event24 - Integrated Camera: Integrated C: device removed
[    87.675] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input27/event24"
[    87.675] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated C" (type: KEYBOARD, id 15)
[    87.676] (II) event24 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[    87.676] (II) event24 - Integrated Camera: Integrated C: device is a keyboard
[    87.677] (II) config/udev: Adding input device Synaptics TM3336-004 (/dev/input/event4)
[    87.677] (**) Synaptics TM3336-004: Applying InputClass "libinput touchpad catchall"
[    87.677] (**) Synaptics TM3336-004: Applying InputClass "libinput touchpad catchall"
[    87.677] (II) Using input driver 'libinput' for 'Synaptics TM3336-004'
[    87.677] (**) Synaptics TM3336-004: always reports core events
[    87.677] (**) Option "Device" "/dev/input/event4"
[    87.677] (**) Option "_source" "server/udev"
[    87.678] (II) event4  - Synaptics TM3336-004: is tagged by udev as: Touchpad
[    87.679] (II) event4  - Synaptics TM3336-004: device is a touchpad
[    87.679] (II) event4  - Synaptics TM3336-004: device removed
[    87.755] (**) Option "Tapping" "On"
[    87.755] (**) Option "NaturalScrolling" "True"
[    87.755] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-SYNA2B52:00/0018:06CB:8254.0001/input/input19/event4"
[    87.755] (II) XINPUT: Adding extended input device "Synaptics TM3336-004" (type: TOUCHPAD, id 16)
[    87.756] (**) Option "AccelerationScheme" "none"
[    87.756] (**) Synaptics TM3336-004: (accel) selected scheme none/0
[    87.756] (**) Synaptics TM3336-004: (accel) acceleration factor: 2.000
[    87.756] (**) Synaptics TM3336-004: (accel) acceleration threshold: 4
[    87.758] (II) event4  - Synaptics TM3336-004: is tagged by udev as: Touchpad
[    87.759] (II) event4  - Synaptics TM3336-004: device is a touchpad
[    87.760] (II) config/udev: Adding input device Synaptics TM3336-004 (/dev/input/mouse0)
[    87.760] (II) No input driver specified, ignoring this device.
[    87.760] (II) This device may have been added with another device file.
[    87.761] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event3)
[    87.761] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[    87.761] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[    87.761] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[    87.761] (**) Ideapad extra buttons: always reports core events
[    87.761] (**) Option "Device" "/dev/input/event3"
[    87.761] (**) Option "_source" "server/udev"
[    87.761] (II) event3  - Ideapad extra buttons: is tagged by udev as: Keyboard
[    87.761] (II) event3  - Ideapad extra buttons: device is a keyboard
[    87.762] (II) event3  - Ideapad extra buttons: device removed
[    87.855] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input3/event3"
[    87.855] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 17)
[    87.856] (II) event3  - Ideapad extra buttons: is tagged by udev as: Keyboard
[    87.856] (II) event3  - Ideapad extra buttons: device is a keyboard
[    87.856] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[    87.856] (II) No input driver specified, ignoring this device.
[    87.856] (II) This device may have been added with another device file.
[    87.857] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[    87.857] (II) No input driver specified, ignoring this device.
[    87.857] (II) This device may have been added with another device file.
[    87.857] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[    87.857] (II) No input driver specified, ignoring this device.
[    87.857] (II) This device may have been added with another device file.
[    87.857] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event14)
[    87.857] (II) No input driver specified, ignoring this device.
[    87.857] (II) This device may have been added with another device file.
[    87.858] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event15)
[    87.858] (II) No input driver specified, ignoring this device.
[    87.858] (II) This device may have been added with another device file.
[    87.858] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event16)
[    87.858] (II) No input driver specified, ignoring this device.
[    87.858] (II) This device may have been added with another device file.
[    87.858] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event17)
[    87.858] (II) No input driver specified, ignoring this device.
[    87.858] (II) This device may have been added with another device file.
[    87.859] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    87.859] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    87.859] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    87.859] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    87.859] (**) AT Translated Set 2 keyboard: always reports core events
[    87.859] (**) Option "Device" "/dev/input/event2"
[    87.859] (**) Option "_source" "server/udev"
[    87.860] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    87.860] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[    87.861] (II) event2  - AT Translated Set 2 keyboard: device removed
[    87.895] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    87.895] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 18)
[    87.896] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    87.896] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[    87.903] (**) HID Keyboard HID Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    87.903] (**) HID Keyboard HID Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    87.903] (II) Using input driver 'libinput' for 'HID Keyboard HID Keyboard Consumer Control'
[    87.903] (**) HID Keyboard HID Keyboard Consumer Control: always reports core events
[    87.903] (**) Option "Device" "/dev/input/event26"
[    87.903] (**) Option "_source" "_driver/libinput"
[    87.903] (II) libinput: HID Keyboard HID Keyboard Consumer Control: is a virtual subdevice
[    87.903] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:04B4:0510.0007/input/input29/event26"
[    87.903] (II) XINPUT: Adding extended input device "HID Keyboard HID Keyboard Consumer Control" (type: KEYBOARD, id 19)
[    87.903] (**) Logitech G604 : Applying InputClass "libinput pointer catchall"
[    87.903] (**) Logitech G604 : Applying InputClass "libinput keyboard catchall"
[    87.903] (**) Logitech G604 : Applying InputClass "libinput pointer catchall"
[    87.903] (**) Logitech G604 : Applying InputClass "libinput keyboard catchall"
[    87.903] (II) Using input driver 'libinput' for 'Logitech G604 '
[    87.903] (**) Logitech G604 : always reports core events
[    87.903] (**) Option "Device" "/dev/input/event18"
[    87.903] (**) Option "_source" "_driver/libinput"
[    87.903] (II) libinput: Logitech G604 : is a virtual subdevice
[    87.903] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C539.0004/0003:046D:4085.0008/input/input36/event18"
[    87.903] (II) XINPUT: Adding extended input device "Logitech G604 " (type: KEYBOARD, id 20)
[    87.908] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    87.908] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[    87.908] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[    87.908] (--) NVIDIA(GPU-0): 
[    87.930] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    87.930] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    87.930] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    87.930] (--) NVIDIA(GPU-0): 
[    87.974] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[    87.974] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[    87.974] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[    87.974] (--) NVIDIA(GPU-0): 
[    88.282] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    88.282] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[    88.282] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[    88.282] (--) NVIDIA(GPU-0): 
[    88.305] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    88.305] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    88.305] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    88.305] (--) NVIDIA(GPU-0): 
[    88.348] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[    88.348] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[    88.348] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[    88.348] (--) NVIDIA(GPU-0): 
[    88.348] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    88.348] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[    88.348] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[    88.348] (--) NVIDIA(GPU-0): 
[    88.371] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    88.371] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    88.371] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    88.371] (--) NVIDIA(GPU-0): 
[    88.414] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[    88.414] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[    88.414] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[    88.414] (--) NVIDIA(GPU-0): 
[    88.465] (II) NVIDIA(0): Setting mode "HDMI-0: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[   119.040] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   119.040] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   119.040] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[   119.040] (--) NVIDIA(GPU-0): 
[   119.063] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   119.063] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   119.063] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   119.063] (--) NVIDIA(GPU-0): 
[   119.106] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[   119.106] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[   119.106] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[   119.106] (--) NVIDIA(GPU-0): 
[   119.106] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   119.106] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   119.106] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[   119.106] (--) NVIDIA(GPU-0): 
[   119.129] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   119.129] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   119.129] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   119.129] (--) NVIDIA(GPU-0): 
[   119.172] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[   119.172] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[   119.172] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[   119.172] (--) NVIDIA(GPU-0): 
[   119.195] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   119.195] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   119.195] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[   119.195] (--) NVIDIA(GPU-0): 
[   119.218] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   119.218] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   119.218] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   119.218] (--) NVIDIA(GPU-0): 
[   119.261] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[   119.261] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[   119.261] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[   119.261] (--) NVIDIA(GPU-0): 
[   119.261] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   119.261] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   119.261] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[   119.261] (--) NVIDIA(GPU-0): 
[   119.284] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   119.284] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   119.284] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   119.284] (--) NVIDIA(GPU-0): 
[   119.327] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[   119.327] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[   119.327] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[   119.327] (--) NVIDIA(GPU-0): 
[   119.345] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   119.345] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   119.345] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[   119.345] (--) NVIDIA(GPU-0): 
[   119.368] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   119.368] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   119.368] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   119.368] (--) NVIDIA(GPU-0): 
[   119.411] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[   119.411] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[   119.411] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[   119.411] (--) NVIDIA(GPU-0): 
[   119.411] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   119.411] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   119.411] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[   119.411] (--) NVIDIA(GPU-0): 
[   119.434] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   119.434] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   119.434] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   119.434] (--) NVIDIA(GPU-0): 
[   119.477] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[   119.477] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[   119.477] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[   119.477] (--) NVIDIA(GPU-0): 
[   119.491] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   119.491] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   119.491] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[   119.491] (--) NVIDIA(GPU-0): 
[   119.513] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   119.513] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   119.513] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   119.513] (--) NVIDIA(GPU-0): 
[   119.556] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[   119.556] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[   119.556] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[   119.556] (--) NVIDIA(GPU-0): 
[   119.556] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   119.556] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   119.556] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[   119.556] (--) NVIDIA(GPU-0): 
[   119.579] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   119.579] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   119.579] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   119.579] (--) NVIDIA(GPU-0): 
[   119.622] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[   119.622] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[   119.622] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[   119.622] (--) NVIDIA(GPU-0): 
[   119.641] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   119.641] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   119.641] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[   119.641] (--) NVIDIA(GPU-0): 
[   119.664] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   119.664] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   119.664] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   119.664] (--) NVIDIA(GPU-0): 
[   119.707] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[   119.707] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[   119.707] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[   119.707] (--) NVIDIA(GPU-0): 
[   119.707] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   119.707] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   119.707] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[   119.707] (--) NVIDIA(GPU-0): 
[   119.730] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   119.730] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   119.730] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   119.730] (--) NVIDIA(GPU-0): 
[   119.773] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[   119.773] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[   119.773] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[   119.773] (--) NVIDIA(GPU-0): 
[   119.792] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   119.792] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   119.792] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[   119.792] (--) NVIDIA(GPU-0): 
[   119.815] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   119.815] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   119.815] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   119.815] (--) NVIDIA(GPU-0): 
[   119.858] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[   119.858] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[   119.858] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[   119.858] (--) NVIDIA(GPU-0): 
[   119.858] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   119.858] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   119.858] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[   119.858] (--) NVIDIA(GPU-0): 
[   119.881] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   119.881] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   119.881] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   119.881] (--) NVIDIA(GPU-0): 
[   119.924] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[   119.924] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[   119.924] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[   119.924] (--) NVIDIA(GPU-0): 
[   119.961] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   119.961] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   119.961] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[   119.961] (--) NVIDIA(GPU-0): 
[   119.984] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   119.984] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   119.984] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   119.984] (--) NVIDIA(GPU-0): 
[   120.027] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[   120.027] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[   120.027] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[   120.027] (--) NVIDIA(GPU-0): 
[   120.027] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   120.027] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   120.027] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[   120.027] (--) NVIDIA(GPU-0): 
[   120.049] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   120.049] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   120.049] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   120.049] (--) NVIDIA(GPU-0): 
[   120.093] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[   120.093] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[   120.093] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[   120.093] (--) NVIDIA(GPU-0): 
[   120.151] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   120.151] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   120.151] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[   120.151] (--) NVIDIA(GPU-0): 
[   120.173] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   120.173] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   120.173] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   120.173] (--) NVIDIA(GPU-0): 
[   120.217] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[   120.217] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[   120.217] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[   120.217] (--) NVIDIA(GPU-0): 
[   125.540] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   125.540] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   125.540] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[   125.540] (--) NVIDIA(GPU-0): 
[   125.563] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   125.563] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   125.563] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   125.563] (--) NVIDIA(GPU-0): 
[   125.606] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[   125.606] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[   125.606] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[   125.606] (--) NVIDIA(GPU-0): 
[   125.606] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   125.606] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   125.606] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[   125.606] (--) NVIDIA(GPU-0): 
[   125.629] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   125.629] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   125.629] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   125.629] (--) NVIDIA(GPU-0): 
[   125.672] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[   125.672] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[   125.672] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[   125.672] (--) NVIDIA(GPU-0): 
[   125.690] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   125.690] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   125.690] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[   125.690] (--) NVIDIA(GPU-0): 
[   125.712] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   125.712] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   125.712] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   125.712] (--) NVIDIA(GPU-0): 
[   125.755] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[   125.755] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[   125.755] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[   125.755] (--) NVIDIA(GPU-0): 
[   125.755] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   125.755] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   125.756] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[   125.756] (--) NVIDIA(GPU-0): 
[   125.778] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   125.778] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   125.778] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   125.778] (--) NVIDIA(GPU-0): 
[   125.821] (--) NVIDIA(GPU-0): HP 27er (DFP-2): connected
[   125.821] (--) NVIDIA(GPU-0): HP 27er (DFP-2): Internal TMDS
[   125.821] (--) NVIDIA(GPU-0): HP 27er (DFP-2): 600.0 MHz maximum pixel clock
[   125.821] (--) NVIDIA(GPU-0): 
[   137.962] (EE) 
[   137.962] (EE) Backtrace:
[   137.962] (EE) 0: /usr/lib/Xorg (xorg_backtrace+0x5b) [0x558c850dbddb]
[   137.962] (EE) 1: /usr/lib/Xorg (0x558c84f90000+0x156a15) [0x558c850e6a15]
[   137.962] (EE) 2: /usr/lib/libpthread.so.0 (0x7fabcca12000+0x13870) [0x7fabcca25870]
[   137.962] (EE) 
[   137.962] (EE) Segmentation fault at address 0x0
[   137.962] (EE) 
Fatal server error:
[   137.962] (EE) Caught signal 11 (Segmentation fault). Server aborting
[   137.962] (EE) 
[   137.962] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   137.962] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   137.962] (EE) 
[   138.111] (EE) Server terminated with error (1). Closing log file.

This happens right after updating, so is probably related to Nvidia, as always. Any help would be appreciated.

Last edited by bjornp_ (2021-12-14 17:45:38)

bjornp_ · 2021-12-14 17:45:40

Downgrading to nvidia 495-44 from 495-46 fixes the issue.

Svenstaro · 2021-12-17 18:29:13

Just making sure: You rebooted after upgrading, right?

bjornp_ · 2021-12-17 18:30:15

Yes, I did. I always do after upgrading video drivers or the kernel; with this update it was both

seth · 2021-12-17 20:09:43

The issue is actually becoming super-common… https://bugs.archlinux.org/task/73031

bjornp_ · 2021-12-17 20:13:34

Those other forum posts seem to be the issue I'm having as well. Thanks for posting. I won't mark this as resolved just yet, since it isn't, but it's good to know the issue is getting traction and it's being worked on.

Last edited by bjornp_ (2021-12-17 20:15:53)

Svenstaro · 2021-12-17 20:31:16

In Arch the issue isn't being worked on because there's no evidence that this is a packaging problem. I suppose the best you can do is give Nvidia enough information to work this out. For me the driver is working just fine.

seth · 2021-12-18 16:43:11

The nasty part is that this is all over the place - afaics we've single and multi-GPU systems, different kernels, both recent Xorg server releases, single- and multiple outputs … and the nvidia module doesn't even show up in the stacktrace…
W/ https://bbs.archlinux.org/viewtopic.php … 2#p2009832 it *might* be related to GLX (reports like "lightdm works fine but mate crashes") but that's a wild guess - maybe the session does something to the screen configuration that the DM.

Since it's running fine for you, do you run a GL context (preferably GL compositor) w/ the session?

Svenstaro · 2021-12-18 18:39:08

I run an i3 session without a compositor.

seth · 2021-12-18 20:51:00

Since (afaics) everyone affected runs a session w/ a (GL) compositor and you don't and you're not affected, you're in a (so far) unique position to test a possible cause…
https://wiki.archlinux.org/title/Picom (nb. that it defaults to the xrender backend)

bjornp_ · 2021-12-21 08:07:36

I run a i3 session too, indeed *with* picom. I did just find out that the crash only occurs when using `prime-run` to start the application in question. My Xorg session runs—by default—on Nvidia, so I don't actually need `prime-run` to get offloading, it was simply left over from when I ran Xorg on my iGPU.

I have my picom configured to use GLX backend. I will test using xrender and see whether that changes the issue at all. I will also try to reproduce the issue with applications other than Minecraft.

Update: Turning off picom or changing to xrender backend does not change the issue: starting Minecraft with `prime-run` crashes Xorg

Last edited by bjornp_ (2021-12-21 08:10:37)

seth · 2021-12-21 08:35:42

My Xorg session runs—by default—on Nvidia, so I don't actually need `prime-run` to get offloading, it was simply left over from when I ran Xorg on my iGPU.

That would make prime-run idempotent. What's the output of "glxinfo -B" and "prime-run glxinfo -B" (prepare for the second call to take down your session!)

bjornp_ · 2021-12-21 08:38:21

Interestingly, it did not take down my session. The output is as follows:

[bjorn@L340-arch] [~] » glxinfo -B           
name of display: :0
display: :0  screen: 0
direct rendering: Yes
Memory info (GL_NVX_gpu_memory_info):
    Dedicated video memory: 4096 MB
    Total available memory: 4096 MB
    Currently available dedicated video memory: 3158 MB
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: NVIDIA GeForce GTX 1650/PCIe/SSE2
OpenGL core profile version string: 4.6.0 NVIDIA 495.46
OpenGL core profile shading language version string: 4.60 NVIDIA
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 4.6.0 NVIDIA 495.46
OpenGL shading language version string: 4.60 NVIDIA
OpenGL context flags: (none)
OpenGL profile mask: (none)

OpenGL ES profile version string: OpenGL ES 3.2 NVIDIA 495.46
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20

[bjorn@L340-arch] [~] » prime-run glxinfo -B
name of display: :0
display: :0  screen: 0
direct rendering: Yes
Memory info (GL_NVX_gpu_memory_info):
    Dedicated video memory: 4096 MB
    Total available memory: 4096 MB
    Currently available dedicated video memory: 3158 MB
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: NVIDIA GeForce GTX 1650/PCIe/SSE2
OpenGL core profile version string: 4.6.0 NVIDIA 495.46
OpenGL core profile shading language version string: 4.60 NVIDIA
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 4.6.0 NVIDIA 495.46
OpenGL shading language version string: 4.60 NVIDIA
OpenGL context flags: (none)
OpenGL profile mask: (none)

OpenGL ES profile version string: OpenGL ES 3.2 NVIDIA 495.46
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20

seth · 2021-12-21 08:47:03

You're indeed running on the nvidia chip - does just running minecraft (no prime-run) kill the session?
Do you use some of the fancier picom features (eg. blur)?

bjornp_ · 2021-12-21 08:51:09

No, just running minecraft without prime-run does not kill the session, and it does run it on the GPU. I do use blurring for shadows, according to my config, and I use some features like fading between workspaces and automatic unredirection on fullscreen so games aren't slowed down by picom. For reference, my full picom config:

#################################
#             Shadows           #
#################################


# Enabled client-side shadows on windows. Note desktop windows 
# (windows with '_NET_WM_WINDOW_TYPE_DESKTOP') never get shadow, 
# unless explicitly requested using the wintypes option.
#
# shadow = false
shadow = false;

# The blur radius for shadows, in pixels. (defaults to 12)
# shadow-radius = 12
shadow-radius = 12;

# The opacity of shadows. (0.0 - 1.0, defaults to 0.75)
# shadow-opacity = .75

# The left offset for shadows, in pixels. (defaults to -15)
# shadow-offset-x = -15
shadow-offset-x = -7;

# The top offset for shadows, in pixels. (defaults to -15)
# shadow-offset-y = -15
shadow-offset-y = -7;

# Avoid drawing shadows on dock/panel windows. This option is deprecated,
# you should use the *wintypes* option in your config file instead.
#
# no-dock-shadow = false

# Don't draw shadows on drag-and-drop windows. This option is deprecated, 
# you should use the *wintypes* option in your config file instead.
#
# no-dnd-shadow = false

# Red color value of shadow (0.0 - 1.0, defaults to 0).
# shadow-red = 0

# Green color value of shadow (0.0 - 1.0, defaults to 0).
# shadow-green = 0

# Blue color value of shadow (0.0 - 1.0, defaults to 0).
# shadow-blue = 0

# Do not paint shadows on shaped windows. Note shaped windows 
# here means windows setting its shape through X Shape extension. 
# Those using ARGB background is beyond our control. 
# Deprecated, use 
#   shadow-exclude = 'bounding_shaped'
# or 
#   shadow-exclude = 'bounding_shaped && !rounded_corners'
# instead.
#
# shadow-ignore-shaped = ''

# Specify a list of conditions of windows that should have no shadow.
#
# examples:
#   shadow-exclude = "n:e:Notification";
#
# shadow-exclude = []
shadow-exclude = [
  "name = 'Notification'",
  "class_g = 'Conky'",
  "class_g ?= 'Notify-osd'",
  "class_g = 'Cairo-clock'",
  "_GTK_FRAME_EXTENTS@:c",
  "class_g = 'Dunst'"
];

# Specify a X geometry that describes the region in which shadow should not
# be painted in, such as a dock window region. Use 
#    shadow-exclude-reg = "x10+0+0"
# for example, if the 10 pixels on the bottom of the screen should not have shadows painted on.
#
# shadow-exclude-reg = "" 

# Crop shadow of a window fully on a particular Xinerama screen to the screen.
# xinerama-shadow-crop = false


#################################
#           Fading              #
#################################


# Fade windows in/out when opening/closing and when opacity changes,
#  unless no-fading-openclose is used.
# fading = false
fading = true

# Opacity change between steps while fading in. (0.01 - 1.0, defaults to 0.028)
# fade-in-step = 0.028
fade-in-step = 0.03;

# Opacity change between steps while fading out. (0.01 - 1.0, defaults to 0.03)
# fade-out-step = 0.03
fade-out-step = 0.03;

# The time between steps in fade step, in milliseconds. (> 0, defaults to 10)
fade-delta = 7

# Specify a list of conditions of windows that should not be faded.
# fade-exclude = []

# Do not fade on window open/close.
no-fading-openclose = false

# Do not fade destroyed ARGB windows with WM frame. Workaround of bugs in Openbox, Fluxbox, etc.
# no-fading-destroyed-argb = false

#################################
#   Transparency / Opacity      #
#################################


# Opacity of inactive windows. (0.1 - 1.0, defaults to 1.0)
inactive-opacity = 1;
# inactive-opacity = 0.8;

# Opacity of window titlebars and borders. (0.1 - 1.0, disabled by default)
# frame-opacity = 1.0
# frame-opacity = 0.7;

# Default opacity for dropdown menus and popup menus. (0.0 - 1.0, defaults to 1.0)
# menu-opacity = 1.0

# Let inactive opacity set by -i override the '_NET_WM_OPACITY' values of windows.
# inactive-opacity-override = true
inactive-opacity-override = false;

# Default opacity for active windows. (0.0 - 1.0, defaults to 1.0)
# active-opacity = 1.0

# Dim inactive windows. (0.0 - 1.0, defaults to 0.0)
# inactive-dim = 0.0

# Specify a list of conditions of windows that should always be considered focused.
# focus-exclude = []
focus-exclude = [ "class_g = 'Cairo-clock'" ];

# Use fixed inactive dim value, instead of adjusting according to window opacity.
# inactive-dim-fixed = 1.0

# Specify a list of opacity rules, in the format `PERCENT:PATTERN`, 
# like `50:name *= "Firefox"`. picom-trans is recommended over this. 
# Note we don't make any guarantee about possible conflicts with other 
# programs that set '_NET_WM_WINDOW_OPACITY' on frame or client windows.
# example:
# opacity-rule = [ "80:name *= 'rofi'" ];
#

#################################
#     Background-Blurring       #
#################################


# Parameters for background blurring, see the *BLUR* section for more information.
# blur-method = "kernel"
# blur-size = 3
#
# blur-deviation = false

# Blur background of semi-transparent / ARGB windows. 
# Bad in performance, with driver-dependent behavior. 
# The name of the switch may change without prior notifications.
#
blur-background = false

# Blur background of windows when the window frame is not opaque. 
# Implies:
#    blur-background 
# Bad in performance, with driver-dependent behavior. The name may change.
#
# blur-background-frame = false


# Use fixed blur strength rather than adjusting according to window opacity.
# blur-background-fixed = false


# Specify the blur convolution kernel, with the following format:
# example:
blur-kern = "5,5,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1";
#
# blur-kern = ''
# blur-kern = "3x3box";


# Exclude conditions for background blur.
# blur-background-exclude = []
blur-background-exclude = [
  "window_type = 'dock'",
  "window_type = 'desktop'",
  "_GTK_FRAME_EXTENTS@:c"
];

#################################
#       General Settings        #
#################################

# Daemonize process. Fork to background after initialization. Causes issues with certain (badly-written) drivers.
# daemon = false

# Specify the backend to use: `xrender`, `glx`, or `xr_glx_hybrid`.
# `xrender` is the default one.
#
#backend = "glx";
backend = "xrender";

# Enable/disable Sync.
# vsync = false
vsync = false

# Enable remote control via D-Bus. See the *D-BUS API* section below for more details.
# dbus = false

# Try to detect WM windows (a non-override-redirect window with no 
# child that has 'WM_STATE') and mark them as active.
#
mark-wmwin-focused = false
# mark-wmwin-focused = true;

# Mark override-redirect windows that doesn't have a child window with 'WM_STATE' focused.
mark-ovredir-focused = false
# mark-ovredir-focused = true;

# Try to detect windows with rounded corners and don't consider them 
# shaped windows. The accuracy is not very high, unfortunately.
#
# detect-rounded-corners = false
detect-rounded-corners = false;

# Detect '_NET_WM_OPACITY' on client windows, useful for window managers
# not passing '_NET_WM_OPACITY' of client windows to frame windows.
#
# detect-client-opacity = false
detect-client-opacity = true;

# Specify refresh rate of the screen. If not specified or 0, picom will 
# try detecting this with X RandR extension.
#
# refresh-rate = 60
refresh-rate = 0

# Limit picom to repaint at most once every 1 / 'refresh_rate' second to 
# boost performance. This should not be used with 
#   vsync drm/opengl/opengl-oml
# as they essentially does sw-opti's job already, 
# unless you wish to specify a lower refresh rate than the actual value.
#
sw-opti = true

# Use EWMH '_NET_ACTIVE_WINDOW' to determine currently focused window, 
# rather than listening to 'FocusIn'/'FocusOut' event. Might have more accuracy, 
# provided that the WM supports it.
#
use-ewmh-active-win = true

# Unredirect all windows if a full-screen opaque window is detected, 
# to maximize performance for full-screen windows. Known to cause flickering 
# when redirecting/unredirecting windows.
#
unredir-if-possible = true

# Delay before unredirecting the window, in milliseconds. Defaults to 0.
# unredir-if-possible-delay = 0

# Conditions of windows that shouldn't be considered full-screen for unredirecting screen.
unredir-if-possible-exclude = [
    "name *= 'Chrome'",
    "name *= 'VLC'",
]

# Use 'WM_TRANSIENT_FOR' to group windows, and consider windows 
# in the same group focused at the same time.
#
# detect-transient = false
detect-transient = true

# Use 'WM_CLIENT_LEADER' to group windows, and consider windows in the same 
# group focused at the same time. 'WM_TRANSIENT_FOR' has higher priority if 
# detect-transient is enabled, too.
#
# detect-client-leader = false
detect-client-leader = true

# Resize damaged region by a specific number of pixels. 
# A positive value enlarges it while a negative one shrinks it. 
# If the value is positive, those additional pixels will not be actually painted 
# to screen, only used in blur calculation, and such. (Due to technical limitations, 
# with use-damage, those pixels will still be incorrectly painted to screen.) 
# Primarily used to fix the line corruption issues of blur, 
# in which case you should use the blur radius value here 
# (e.g. with a 3x3 kernel, you should use `--resize-damage 1`, 
# with a 5x5 one you use `--resize-damage 2`, and so on). 
# May or may not work with *--glx-no-stencil*. Shrinking doesn't function correctly.
#
# resize-damage = 1

# Specify a list of conditions of windows that should be painted with inverted color. 
# Resource-hogging, and is not well tested.
#
# invert-color-include = []

# GLX backend: Avoid using stencil buffer, useful if you don't have a stencil buffer. 
# Might cause incorrect opacity when rendering transparent content (but never 
# practically happened) and may not work with blur-background. 
# My tests show a 15% performance boost. Recommended.
#
glx-no-stencil = true

# GLX backend: Avoid rebinding pixmap on window damage. 
# Probably could improve performance on rapid window content changes, 
# but is known to break things on some drivers (LLVMpipe, xf86-video-intel, etc.).
# Recommended if it works.
#
glx-no-rebind-pixmap = true

# Disable the use of damage information. 
# This cause the whole screen to be redrawn everytime, instead of the part of the screen
# has actually changed. Potentially degrades the performance, but might fix some artifacts.
# The opposing option is use-damage
#
# no-use-damage = false
use-damage = true

# Use X Sync fence to sync clients' draw calls, to make sure all draw 
# calls are finished before picom starts drawing. Needed on nvidia-drivers 
# with GLX backend for some users.
#
xrender-sync-fence = true

# GLX backend: Use specified GLSL fragment shader for rendering window contents. 
# See `compton-default-fshader-win.glsl` and `compton-fake-transparency-fshader-win.glsl` 
# in the source tree for examples.
#
# glx-fshader-win = ''

# Force all windows to be painted with blending. Useful if you 
# have a glx-fshader-win that could turn opaque pixels transparent.
#
# force-win-blend = false

# Do not use EWMH to detect fullscreen windows. 
# Reverts to checking if a window is fullscreen based only on its size and coordinates.
#
# no-ewmh-fullscreen = false

# Dimming bright windows so their brightness doesn't exceed this set value. 
# Brightness of a window is estimated by averaging all pixels in the window, 
# so this could comes with a performance hit. 
# Setting this to 1.0 disables this behaviour. Requires --use-damage to be disabled. (default: 1.0)
#
# max-brightness = 1.0

# Make transparent windows clip other windows like non-transparent windows do,
# instead of blending on top of them.
#
# transparent-clipping = false

# Set the log level. Possible values are:
#  "trace", "debug", "info", "warn", "error"
# in increasing level of importance. Case doesn't matter. 
# If using the "TRACE" log level, it's better to log into a file 
# using *--log-file*, since it can generate a huge stream of logs.
#
# log-level = "debug"
log-level = "warn";

# Set the log file.
# If *--log-file* is never specified, logs will be written to stderr. 
# Otherwise, logs will to written to the given file, though some of the early 
# logs might still be written to the stderr. 
# When setting this option from the config file, it is recommended to use an absolute path.
#
# log-file = '/path/to/your/log/file'

# Show all X errors (for debugging)
# show-all-xerrors = false

# Write process ID to a file.
# write-pid-path = '/path/to/your/log/file'

# Window type settings
# 
# 'WINDOW_TYPE' is one of the 15 window types defined in EWMH standard: 
#     "unknown", "desktop", "dock", "toolbar", "menu", "utility", 
#     "splash", "dialog", "normal", "dropdown_menu", "popup_menu", 
#     "tooltip", "notification", "combo", and "dnd".
# 
# Following per window-type options are available: ::
# 
#   fade, shadow:::
#     Controls window-type-specific shadow and fade settings.
# 
#   opacity:::
#     Controls default opacity of the window type.
# 
#   focus:::
#     Controls whether the window of this type is to be always considered focused. 
#     (By default, all window types except "normal" and "dialog" has this on.)
# 
#   full-shadow:::
#     Controls whether shadow is drawn under the parts of the window that you 
#     normally won't be able to see. Useful when the window has parts of it 
#     transparent, and you want shadows in those areas.
# 
#   redir-ignore:::
#     Controls whether this type of windows should cause screen to become 
#     redirected again after been unredirected. If you have unredir-if-possible
#     set, and doesn't want certain window to cause unnecessary screen redirection, 
#     you can set this to `true`.
#
wintypes:
{
  tooltip = { fade = true; shadow = true; opacity = 0.75; focus = true; full-shadow = false; };
  dock = { shadow = false; }
  dnd = { shadow = false; }
  popup_menu = { opacity = 1.0; }
  dropdown_menu = { opacity = 1.0; }
};

seth · 2021-12-21 08:55:35

prim-run isn't exactly complex…
https://github.com/archlinux/svntogit-p … /prime-run

You could try whether one of those vars alone triggers this, this might be down to something as ridiculous as parsing an environment variable…

bjornp_ · 2021-12-21 09:00:24

You are correct in that: passing `__NV_PRIME_RENDER_OFFLOAD=1' kills the session, either of the other two does not.

GerBra · 2021-12-25 10:29:17

seth wrote:

Since (afaics) everyone affected runs a session w/ a (GL) compositor and you don't and you're not affected, you're in a (so far) unique position to test a possible cause…
https://wiki.archlinux.org/title/Picom (nb. that it defaults to the xrender backend)

(Sorry, english is not my native language)

Myself run into the same problem. Also using Mate DE and nvidia blob. Got the same Xorg.X.log bachtrace entries and coredumps. For first i downgraded kernel and nvidia packages to 5.14.15.arch1-1 and 495.44-2.

Today i've tested a bit more. First done a full sys update.

- Tested with i3 as windowmanager: no problem
- Started mate-session: problem back
- Disabled Mate's compositing-manager: no problem
- Enabled picom in xinitrc: no problem

So - for me - it seems that the problem part is the combination with Mate's windowmanager (marco) and the build-in compisiting and (maybe) the current GL in nvidia 495.46.x

Starting Mate (marco wm) with disabled compositing i could immidiatley reproduce the crash/coredump when enabling the mate compositer via Menu->System->Settings->Appereace->Windows->SoftwareCompositing.

One could easily disable mate/marcos compositor with installing dconf-editor and navigate to /org/mate/marco/general and disable compositing.manager. This could be done via a different Xorg-Session/Windowmanager which is not affected by the problem.
Or install picom and let it start before mate-session, so picom would get preference before the still enabled mate/marco's compositing manager.

Maybe it's worth to recompile the marco package against the current (arch) software versions...

seth · 2021-12-25 13:41:44

The X11 server crashes - that's by definition not a client problem.
Also there're equal crash reports for picom (did you switch the backend to GLX)?

From #17 it sounds like the nvidia driver does something to the server when output configuration clashes w/ a GL context (setup)

As Sven pointed out, the kinda rushed release could indicate a CVE hotfix… that was sewed w/ a very hot needle…
Since we've no backtrace leading into the nvidia driver and no code to look at and no overly obvious pattern so far (the picom/gl situation could be quite relevant here) the best thing you can do is to keep the driver at .44 and wait for a proper update

GerBra · 2021-12-25 14:27:03

seth wrote:

The X11 server crashes - that's by definition not a client problem.

That's a point, yes

seth wrote:

Also there're equal crash reports for picom (did you switch the backend to GLX)?

Not the first tries.
I currently started mate and picom with:
picom --backend glx &
in my xinitrc and mate-session was started without an issue. Only difference/annoying: in mate-Terminal (x terminal emulation) when using less or anything with a pager or midnightcommander(mc) I got a lot of "flickering", "line jumping" and input lags. That's not the case when using picoms xrender default backend.

seth wrote:

From #17 it sounds like the nvidia driver does something to the server when output configuration clashes w/ a GL context (setup)
As Sven pointed out, the kinda rushed release could indicate a CVE hotfix… that was sewed w/ a very hot needle…
Since we've no backtrace leading into the nvidia driver and no code to look at and no overly obvious pattern so far (the picom/gl situation could be quite relevant here) the best thing you can do is to keep the driver at .44 and wait for a proper update

For myself I could live perfectly with mate-session without a compositor (or take a deeper look at picom). An uptodate system is more valuable for me.

Don't know if it's relevant, about the coredumps/backtraces and the "missing" nvidia presence: If i start mate-session without compositor and (re)enable it during the running session i got a different coredump as before. But also the nvidia module "seems not involved"...
Stack trace of Coredump from first tries a week ago:

Stack trace of thread 4165:
                #0  0x00007f3a86051d22 raise (libc.so.6 + 0x3cd22)
                #1  0x00007f3a8603b862 abort (libc.so.6 + 0x26862)
                #2  0x0000564befeccd2a OsAbort (Xorg + 0x149d2a)
                #3  0x0000564befece811 FatalError (Xorg + 0x14b811)
                #4  0x0000564befed43e6 n/a (Xorg + 0x1513e6)
                #5  0x00007f3a86051da0 n/a (libc.so.6 + 0x3cda0)

Stack trace from coredump when compositor is re-enabled (10723 is Xorg)

                Stack trace of thread 10723:
                #0  0x00007fb0fb3c9d22 raise (libc.so.6 + 0x3cd22)
                #1  0x00007fb0fb3b3862 abort (libc.so.6 + 0x26862)
                #2  0x0000559e19f779c0 OsAbort (Xorg + 0x1539c0)
                #3  0x0000559e19f79505 FatalError (Xorg + 0x155505)
                #4  0x0000559e19f7eeda n/a (Xorg + 0x15aeda)
                #5  0x00007fb0fb571870 n/a (libpthread.so.0 + 0x13870)
                
                Stack trace of thread 10731:
                #0  0x00007fb0fb570600 __lll_lock_wait (libpthread.so.0 + 0x12600)
                #1  0x00007fb0fb569580 __pthread_mutex_lock (libpthread.so.0 + 0xb580)
                #2  0x0000559e19f6ce15 n/a (Xorg + 0x148e15)
                #3  0x0000559e19f775f1 n/a (Xorg + 0x1535f1)
                #4  0x0000559e19f73639 n/a (Xorg + 0x14f639)
                #5  0x00007fb0fb567259 start_thread (libpthread.so.0 + 0x9259)
                #6  0x00007fb0fb48b5e3 __clone (libc.so.6 + 0xfe5e3)

Also/still no nvidia "hints", the additional thread is maybe that here crashed a full running session. Instead the first crashed at Xorg/Mate starting process...

Last edited by GerBra (2021-12-25 14:33:23)

Arch Linux

#1 2021-12-14 17:23:48

Xorg Segmentation Fault

#2 2021-12-14 17:45:40

Re: Xorg Segmentation Fault

#3 2021-12-17 18:29:13

Re: Xorg Segmentation Fault

#4 2021-12-17 18:30:15

Re: Xorg Segmentation Fault

#5 2021-12-17 20:09:43

Re: Xorg Segmentation Fault

#6 2021-12-17 20:13:34

Re: Xorg Segmentation Fault

#7 2021-12-17 20:31:16

Re: Xorg Segmentation Fault

#8 2021-12-18 16:43:11

Re: Xorg Segmentation Fault

#9 2021-12-18 18:39:08

Re: Xorg Segmentation Fault

#10 2021-12-18 20:51:00

Re: Xorg Segmentation Fault

#11 2021-12-21 08:07:36

Re: Xorg Segmentation Fault

#12 2021-12-21 08:35:42

Re: Xorg Segmentation Fault

#13 2021-12-21 08:38:21

Re: Xorg Segmentation Fault

#14 2021-12-21 08:47:03

Re: Xorg Segmentation Fault

#15 2021-12-21 08:51:09

Re: Xorg Segmentation Fault

#16 2021-12-21 08:55:35

Re: Xorg Segmentation Fault

#17 2021-12-21 09:00:24

Re: Xorg Segmentation Fault

#18 2021-12-25 10:29:17

Re: Xorg Segmentation Fault

#19 2021-12-25 13:41:44

Re: Xorg Segmentation Fault

#20 2021-12-25 14:27:03

Re: Xorg Segmentation Fault

Board footer