Arch Linux

Somerandomnerd

Member

Registered: 2022-01-25

Posts: 21

SMART is non-existant?

This is weird...

smartctl --info /dev/nvme0n1 | grep 'SMART support is:'

Returns nothing.

smartctl --info /dev/sda | grep 'SMART support is:'

Returns:

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Why does my nvme drive return nothing??

Somerandomnerd

Member

Registered: 2022-01-25

Posts: 21

Re: SMART is non-existant?

BTW, it's a Samsung MZVLB256HBHQ-000L2 drive.

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 25,292

Re: SMART is non-existant?

The format by which an NVME drive announces  SMART support/error reporting is different and the output from smartctl not the same as when applied to an AHCI device, you can't rely on that exact string being present. Run and look at the output without a grep

Also please edit to append new information if no one has replied in between rather than double posting.

Last edited by V1del (2022-01-28 16:39:28)

Somerandomnerd

Member

Registered: 2022-01-25

Posts: 21

Re: SMART is non-existant?

All right, here's the info:

$ sudo smartctl --info /dev/nvme0n1
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.16.2-zen1-1-zen] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       SAMSUNG MZVLB256HBHQ-000L2
Serial Number:                      S4DXNX0N704461
Firmware Version:                   3L1QEXH7
PCI Vendor/Subsystem ID:            0x144d
IEEE OUI Identifier:                0x002538
Total NVM Capacity:                 256,060,514,304 [256 GB]
Unallocated NVM Capacity:           0
Controller ID:                      4
NVMe Version:                       1.3
Number of Namespaces:               1
Namespace 1 Size/Capacity:          256,060,514,304 [256 GB]
Namespace 1 Utilization:            173,849,194,496 [173 GB]
Namespace 1 Formatted LBA Size:     512
Namespace 1 IEEE EUI-64:            002538 8701b35fda
Local Time is:                       [Censored because yes]

That was ALL of the output.

Last edited by Somerandomnerd (2022-01-29 05:50:43)

seth

Member

From: Won't reply 2 private help req

Registered: 2012-09-03

Posts: 77,091

Re: SMART is non-existant?

Does "smartctl -a /dev/nvme0" provide you any smart data?
But it's perfectly possible that the nvme has no smart support, see also https://archlinux.org/packages/communit … /nvme-cli/

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Somerandomnerd

Member

Registered: 2022-01-25

Posts: 21

Re: SMART is non-existant?

Here's the output:

sudo smartctl -a /dev/nvme0
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.16.2-zen1-1-zen] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       SAMSUNG MZVLB256HBHQ-000L2
Serial Number:                      S4DXNX0N704461
Firmware Version:                   3L1QEXH7
PCI Vendor/Subsystem ID:            0x144d
IEEE OUI Identifier:                0x002538
Total NVM Capacity:                 256,060,514,304 [256 GB]
Unallocated NVM Capacity:           0
Controller ID:                      4
NVMe Version:                       1.3
Number of Namespaces:               1
Namespace 1 Size/Capacity:          256,060,514,304 [256 GB]
Namespace 1 Utilization:            173,850,439,680 [173 GB]
Namespace 1 Formatted LBA Size:     512
Namespace 1 IEEE EUI-64:            002538 8701b35fda
Local Time is:                      [Why does it have this info anyway]
Firmware Updates (0x16):            3 Slots, no Reset required
Optional Admin Commands (0x0017):   Security Format Frmw_DL Self_Test
Optional NVM Commands (0x005f):     Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Log Page Attributes (0x03):         S/H_per_NS Cmd_Eff_Lg
Maximum Data Transfer Size:         512 Pages
Warning  Comp. Temp. Threshold:     84 Celsius
Critical Comp. Temp. Threshold:     85 Celsius

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     8.00W       -        -    0  0  0  0        0       0
 1 +     6.30W       -        -    1  1  1  1        0       0
 2 +     3.50W       -        -    2  2  2  2        0       0
 3 -   0.0760W       -        -    3  3  3  3      210    1200
 4 -   0.0050W       -        -    4  4  4  4     2000    8000

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning:                   0x00
Temperature:                        36 Celsius
Available Spare:                    100%
Available Spare Threshold:          10%
Percentage Used:                    3%
Data Units Read:                    28,028,902 [14.3 TB]
Data Units Written:                 33,903,289 [17.3 TB]
Host Read Commands:                 459,567,914
Host Write Commands:                398,006,506
Controller Busy Time:               1,406
Power Cycles:                       3,482
Power On Hours:                     4,694
Unsafe Shutdowns:                   825
Media and Data Integrity Errors:    0
Error Information Log Entries:      1,901
Warning  Comp. Temperature Time:    0
Critical Comp. Temperature Time:    0
Temperature Sensor 1:               36 Celsius
Temperature Sensor 2:               35 Celsius

Error Information (NVMe Log 0x01, 16 of 64 entries)
Num   ErrCount  SQId   CmdId  Status  PELoc          LBA  NSID    VS
  0       1901     0  0x2000  0x4004      -            0     0     -

So it has smart, but wtf? Why was it hidden?

Edit:

Unsafe Shutdowns:                   825

What? I definitely have not had that many unsafe shutdowns.

Last edited by Somerandomnerd (2022-01-29 08:36:26)