You are not logged in.

#1 2022-04-30 18:08:33

Aram1s
Member
Registered: 2022-01-16
Posts: 25

xinit: unable to connect to X server: Connection refused [SOLVED]

I have trouble starting xorg. I get this fatal error when starting xorg:

Fatal server error:
(EE) no screens found
Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: unexpected signal 2

What I have tried:

  • Changing to the nouveau driver

  • Downgrading the kernel

  • Regenrating xorg.conf with nvidia-xconfig

If I remember correctly the error message changed from

xinit: connection to x server lost

to the one mentioned above after downgrading the kernel.

Please ask for relevant information.

Last edited by Aram1s (2022-05-01 15:56:13)


my .xinitrc sucks

Offline

#2 2022-04-30 18:11:26

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 29,614
Website

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

Aram1s wrote:

... Regenrating xorg.conf with nvidia-xconfig

Don't do that (especially if you switched to nouveau).  Remove whatever was generated.  Upgrade the kernel again (to get back to the "original" error), then post a complete xorg.log along with your ~/.xinitrc.

EDIT: from your post history, I'd speculate you had a kernel upgrade and your AUR-provided nvidia-driver may have needed an update for the new kernel (dkms packages may not need to be updated with every kernel as the modules get rebuilt, but from the AUR package's comments it sounds like the current kernel introduced an incompatibility with older versions of the package).

Last edited by Trilby (2022-04-30 18:17:33)


"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#3 2022-04-30 18:33:46

Aram1s
Member
Registered: 2022-01-16
Posts: 25

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

Yes I did upgrade back again but can't find the previous xorg.conf file. I have tried commenting out the .xinitrc file but no change.
Xorg.0.log:

[ 1283.860]
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[ 1283.860] Current Operating System: Linux arch 5.17.5-arch1-1 #1 SMP PREEMPT Wed, 27 Apr 2022 20:56:11 +0000 x86_64
[ 1283.861] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root_UUID=e3359bac-b877-4ac7-be71-d182b8154d44 rw video=VGA-0:1920x1080@60me
[ 1283.861]
[ 1283.861] Current version of pixman: 0.40.0
[ 1283.861]    Before reporting problems, check http://wiki.x.org to make sure that you have the latest version.
[ 1283.861] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1283.861] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr 30 20:16:32 2022
[ 1283.861] (==) Using config file: "/etc/X11/xorg.conf"
[ 1283.861] (==) Using system config directory #/usr/share/X11/xorg.conf.d"
[ 1283.861] (**) |-->Screen "Screen0" (0)
[ 1283.861] (**) |   |-->Monitor "Monitor0"

EDIT: I just wanted to say that I am totally aware that i should not generate with nvidia-xconfig when using nouveau because it is for the proprietary driver, I reverted back to the 470xx driver when doing so.

Last edited by Aram1s (2022-04-30 18:41:04)


my .xinitrc sucks

Offline

#4 2022-04-30 18:51:02

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 29,614
Website

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

Aram1s wrote:

Yes I did upgrade back again but can't find the previous xorg.conf file.

Apparently there are some exceptions with nvidia - but generally one should not have an xorg.conf at all.  So just get rid of it.  Only create xorg.conf.d files if/when needed.

What do you mean you "commented out the .xinitrc"?  That's not something you should do.  I asked you to post your xinitrc so we can see what's in it.

As for the log, please post the complete log - that's just the start - there's no error there at all.


"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#5 2022-04-30 19:02:39

Aram1s
Member
Registered: 2022-01-16
Posts: 25

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

Updating AUR packages, and it takes some time.

Last edited by Aram1s (2022-04-30 19:13:26)


my .xinitrc sucks

Offline

#6 2022-05-01 08:48:46

Aram1s
Member
Registered: 2022-01-16
Posts: 25

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

Log(With nvidia-xconfig and the nvidia-470xx drivers):

[   274.295] 
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[   274.296] Current Operating System: Linux arch 5.17.5-arch1-1 #1 SMP PREEMPT Wed, 27 Apr 2022 20:56:11 +0000 x86_64
[   274.296] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e3359bac-b877-4ac7-be71-d182b8154d44 rw video=VGA-0:1920x1080@60me
[   274.296]  
[   274.296] Current version of pixman: 0.40.0
[   274.297] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   274.297] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   274.298] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May  1 10:24:58 2022
[   274.299] (==) Using config file: "/etc/X11/xorg.conf"
[   274.299] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   274.299] (==) ServerLayout "Layout0"
[   274.299] (**) |-->Screen "Screen0" (0)
[   274.299] (**) |   |-->Monitor "Monitor0"
[   274.299] (**) |   |-->Device "Device0"
[   274.299] (**) |-->Input Device "Keyboard0"
[   274.299] (**) |-->Input Device "Mouse0"
[   274.299] (==) Automatically adding devices
[   274.299] (==) Automatically enabling devices
[   274.299] (==) Automatically adding GPU devices
[   274.299] (==) Automatically binding GPU devices
[   274.299] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   274.299] (WW) The directory "/usr/share/fonts/misc" does not exist.
[   274.299] 	Entry deleted from font path.
[   274.299] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[   274.299] 	Entry deleted from font path.
[   274.299] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   274.299] 	Entry deleted from font path.
[   274.299] (==) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[   274.299] (==) ModulePath set to "/usr/lib/xorg/modules"
[   274.299] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   274.299] (WW) Disabling Keyboard0
[   274.299] (WW) Disabling Mouse0
[   274.299] (II) Module ABI versions:
[   274.299] 	X.Org ANSI C Emulation: 0.4
[   274.299] 	X.Org Video Driver: 25.2
[   274.299] 	X.Org XInput driver : 24.4
[   274.299] 	X.Org Server Extension : 10.0
[   274.300] (++) using VT number 1

[   274.307] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[   274.310] (--) PCI:*(1@0:0:0) 10de:0ffb:103c:176b rev 161, Mem @ 0xd8000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/131072
[   274.310] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   274.310] (II) LoadModule: "glx"
[   274.310] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   274.311] (II) Module glx: vendor="X.Org Foundation"
[   274.311] 	compiled for 1.21.1.3, module version = 1.0.0
[   274.311] 	ABI class: X.Org Server Extension, version 10.0
[   274.311] (II) LoadModule: "nvidia"
[   274.311] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   274.311] (II) Module nvidia: vendor="NVIDIA Corporation"
[   274.311] 	compiled for 1.6.99.901, module version = 1.0.0
[   274.311] 	Module class: X.Org Video Driver
[   274.311] (II) NVIDIA dlloader X Driver  470.103.01  Thu Jan  6 12:18:33 UTC 2022
[   274.311] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   274.312] (II) Loading sub module "fb"
[   274.312] (II) LoadModule: "fb"
[   274.312] (II) Module "fb" already built-in
[   274.312] (II) Loading sub module "wfb"
[   274.312] (II) LoadModule: "wfb"
[   274.312] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   274.312] (II) Module wfb: vendor="X.Org Foundation"
[   274.312] 	compiled for 1.21.1.3, module version = 1.0.0
[   274.312] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   274.312] (II) Loading sub module "ramdac"
[   274.312] (II) LoadModule: "ramdac"
[   274.312] (II) Module "ramdac" already built-in
[   274.314] (EE) NVIDIA: Failed to initialize the NVIDIA kernel module. Please see the
[   274.314] (EE) NVIDIA:     system's kernel log for additional error messages and
[   274.314] (EE) NVIDIA:     consult the NVIDIA README for details.
[   274.315] (EE) No devices detected.
[   274.315] (EE) 
Fatal server error:
[   274.315] (EE) no screens found(EE) 
[   274.315] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   274.315] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   274.315] (EE) 
[   274.316] (EE) Server terminated with error (1). Closing log file.

Last edited by Aram1s (2022-05-01 08:49:44)


my .xinitrc sucks

Offline

#7 2022-05-01 12:18:58

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 29,614
Website

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

Did you rebuild your initicpio after upgrading the package - I don't know if that's included in a post-install script, but from other threads it would appear that it isn't.  Run `mkinitcpio -P` as root, then reboot and try again.

If that also fails, you may want to update the thread title to include "nvidia-470xx: no screens found" to get more help from those experienced with nvidia drivers.

EDIT: this is still with the xorg.conf?  That should be removed as previously noted and reiterated below.

Last edited by Trilby (2022-05-01 12:39:50)


"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#8 2022-05-01 12:37:08

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,888

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

Remove the xorg.conf auto-config works correctly since ages and there's no bug nvidia-xconfig can fix that are actually due to other causes. The message in the log said there's failure to talk to the kernel module, so post a

pacman -Qs 'nvidia|linux.*headers'
sudo dmesg | grep nvidia
lspci -k | grep -EA3 'VGA|3D'

Last edited by V1del (2022-05-01 12:37:29)

Offline

#9 2022-05-01 13:00:43

Aram1s
Member
Registered: 2022-01-16
Posts: 25

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

Command: pacman -Qs 'nvidia|linux.*headers'

local/egl-wayland 2:1.1.9+r3+g582b2d3-1
    EGLStream-based Wayland external platform
local/lib32-nvidia-470xx-utils 470.103.01-1
    NVIDIA drivers utilities (32-bit)
local/libvdpau 1.5-1
    Nvidia VDPAU library
local/libxnvctrl-470xx 470.103.01-1
    NVIDIA NV-CONTROL X extension
local/linux-api-headers 5.16.8-1
    Kernel headers sanitized for use in userspace
local/linux-headers 5.17.5.arch1-1
    Headers and scripts for building modules for the Linux kernel
local/nvidia-470xx-settings 470.103.01-1
    Tool for configuring the NVIDIA graphics driver
local/nvidia-470xx-utils 470.103.01-1
    NVIDIA drivers utilities
local/opencl-nvidia-470xx 470.103.01-1
    OpenCL implemention for NVIDIA

Command: sudo dmesg | grep nvidia
No output

Command: lspci -k | grep -EA3 'VGA|3D'

01:00.0 VGA compatible controller: NVIDIA Corporation GK107GLM [Quadro K2000M] (rev a1)
	DeviceName: 0
	Subsystem: Hewlett-Packard Company Device 176b
	Kernel modules: nouveau

If it uses the nouveau kernel module I guess it explains why there were kernel modules missing.

Last edited by Aram1s (2022-05-01 13:07:27)


my .xinitrc sucks

Offline

#10 2022-05-01 13:06:59

Scimmia
Fellow
Registered: 2012-09-01
Posts: 11,636

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

That doesn't show that you have the modules installed at all. How did you install it?

Offline

#11 2022-05-01 13:08:20

Aram1s
Member
Registered: 2022-01-16
Posts: 25

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

I don't remember. I tried to install them again previously with no luck.
EDIT: As a way of fixing the missing kernel module error.
EDIT: I used modprobe but nothing happened.

Last edited by Aram1s (2022-05-01 13:20:10)


my .xinitrc sucks

Offline

#12 2022-05-01 13:20:00

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 29,614
Website

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

You don't remember what you did yesterday or today between posts 5 and 6?  As for trying to install them again "with no luck" what did you do, and what error message did you get?


"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#13 2022-05-01 13:21:02

Aram1s
Member
Registered: 2022-01-16
Posts: 25

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

I did not find out how


my .xinitrc sucks

Offline

#14 2022-05-01 13:24:24

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 29,614
Website

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

How to what?  install packages?  If you don't know how to install the package, why have we been carrying on for several posts under the assumption that you had upgraded that package?

Follow the AUR page on the wiki to learn how to build / install AUR packages if that's what you mean - but I find that quite hard to believe given that you've apprently done this before.


"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#15 2022-05-01 13:27:38

Aram1s
Member
Registered: 2022-01-16
Posts: 25

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

The 470xx-utils package?
EDIT: I did reinstall that multiple times.

Last edited by Aram1s (2022-05-01 13:28:20)


my .xinitrc sucks

Offline

#16 2022-05-01 13:35:38

Aram1s
Member
Registered: 2022-01-16
Posts: 25

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

It seems I can't find or load the correct module.


my .xinitrc sucks

Offline

#17 2022-05-01 13:43:20

Scimmia
Fellow
Registered: 2012-09-01
Posts: 11,636

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

And how, exactly, did you reinstall "The 470xx-utils package"

Offline

#18 2022-05-01 13:43:50

Aram1s
Member
Registered: 2022-01-16
Posts: 25

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

yay -S nvidia-470xx-utils
With defaults just hitting enter.


my .xinitrc sucks

Offline

#19 2022-05-01 13:45:10

Scimmia
Fellow
Registered: 2012-09-01
Posts: 11,636

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

So you have no idea what all it installed, then? The issue here is basic AUR usage.

Offline

#20 2022-05-01 13:46:03

Aram1s
Member
Registered: 2022-01-16
Posts: 25

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

ok, so what do I do?


my .xinitrc sucks

Offline

#21 2022-05-01 13:47:35

Scimmia
Fellow
Registered: 2012-09-01
Posts: 11,636

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

Offline

#22 2022-05-01 14:55:35

Aram1s
Member
Registered: 2022-01-16
Posts: 25

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

After installing the 470xx package manually I got a different error which I recognised, not to say that I know what it means or how to fix it.
Could not resolve keysym XF86EmojiPicker.
Log:

[  1989.890] 
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[  1989.891] Current Operating System: Linux arch 5.17.5-arch1-1 #1 SMP PREEMPT Wed, 27 Apr 2022 20:56:11 +0000 x86_64
[  1989.891] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e3359bac-b877-4ac7-be71-d182b8154d44 rw video=VGA-0:1920x1080@60me
[  1989.891]  
[  1989.891] Current version of pixman: 0.40.0
[  1989.892] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  1989.892] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1989.893] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May  1 16:49:11 2022
[  1989.893] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1989.893] (==) No Layout section.  Using the first Screen section.
[  1989.893] (==) No screen section available. Using defaults.
[  1989.893] (**) |-->Screen "Default Screen Section" (0)
[  1989.893] (**) |   |-->Monitor "<default monitor>"
[  1989.894] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  1989.894] (==) Automatically adding devices
[  1989.894] (==) Automatically enabling devices
[  1989.894] (==) Automatically adding GPU devices
[  1989.894] (==) Automatically binding GPU devices
[  1989.894] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  1989.894] (WW) The directory "/usr/share/fonts/misc" does not exist.
[  1989.894] 	Entry deleted from font path.
[  1989.894] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[  1989.894] 	Entry deleted from font path.
[  1989.894] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[  1989.894] 	Entry deleted from font path.
[  1989.894] (==) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[  1989.894] (==) ModulePath set to "/usr/lib/xorg/modules"
[  1989.894] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1989.894] (II) Module ABI versions:
[  1989.894] 	X.Org ANSI C Emulation: 0.4
[  1989.894] 	X.Org Video Driver: 25.2
[  1989.894] 	X.Org XInput driver : 24.4
[  1989.894] 	X.Org Server Extension : 10.0
[  1989.894] (++) using VT number 1

[  1989.901] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[  1989.902] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1989.902] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[  1989.903] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[  1989.904] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[  1989.905] (--) PCI:*(1@0:0:0) 10de:0ffb:103c:176b rev 161, Mem @ 0xd8000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/131072
[  1989.905] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  1989.905] (II) LoadModule: "glx"
[  1989.905] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1989.906] (II) Module glx: vendor="X.Org Foundation"
[  1989.906] 	compiled for 1.21.1.3, module version = 1.0.0
[  1989.906] 	ABI class: X.Org Server Extension, version 10.0
[  1989.906] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[  1989.906] 	loading driver: nvidia
[  1989.906] (==) Matched nvidia as autoconfigured driver 0
[  1989.906] (==) Matched nouveau as autoconfigured driver 1
[  1989.906] (==) Matched nv as autoconfigured driver 2
[  1989.906] (==) Matched modesetting as autoconfigured driver 3
[  1989.906] (==) Matched fbdev as autoconfigured driver 4
[  1989.906] (==) Matched vesa as autoconfigured driver 5
[  1989.906] (==) Assigned the driver to the xf86ConfigLayout
[  1989.906] (II) LoadModule: "nvidia"
[  1989.907] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  1989.907] (II) Module nvidia: vendor="NVIDIA Corporation"
[  1989.907] 	compiled for 1.6.99.901, module version = 1.0.0
[  1989.907] 	Module class: X.Org Video Driver
[  1989.907] (II) LoadModule: "nouveau"
[  1989.907] (WW) Warning, couldn't open module nouveau
[  1989.907] (EE) Failed to load module "nouveau" (module does not exist, 0)
[  1989.907] (II) LoadModule: "nv"
[  1989.907] (WW) Warning, couldn't open module nv
[  1989.907] (EE) Failed to load module "nv" (module does not exist, 0)
[  1989.907] (II) LoadModule: "modesetting"
[  1989.907] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  1989.908] (II) Module modesetting: vendor="X.Org Foundation"
[  1989.908] 	compiled for 1.21.1.3, module version = 1.21.1
[  1989.908] 	Module class: X.Org Video Driver
[  1989.908] 	ABI class: X.Org Video Driver, version 25.2
[  1989.908] (II) LoadModule: "fbdev"
[  1989.908] (WW) Warning, couldn't open module fbdev
[  1989.908] (EE) Failed to load module "fbdev" (module does not exist, 0)
[  1989.908] (II) LoadModule: "vesa"
[  1989.908] (WW) Warning, couldn't open module vesa
[  1989.908] (EE) Failed to load module "vesa" (module does not exist, 0)
[  1989.908] (II) NVIDIA dlloader X Driver  470.103.01  Thu Jan  6 12:18:33 UTC 2022
[  1989.908] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  1989.908] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  1989.908] (II) systemd-logind: releasing fd for 226:0
[  1989.909] (II) Loading sub module "fb"
[  1989.909] (II) LoadModule: "fb"
[  1989.909] (II) Module "fb" already built-in
[  1989.909] (II) Loading sub module "wfb"
[  1989.909] (II) LoadModule: "wfb"
[  1989.909] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  1989.909] (II) Module wfb: vendor="X.Org Foundation"
[  1989.909] 	compiled for 1.21.1.3, module version = 1.0.0
[  1989.909] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1989.909] (II) Loading sub module "ramdac"
[  1989.909] (II) LoadModule: "ramdac"
[  1989.909] (II) Module "ramdac" already built-in
[  1989.910] (WW) Falling back to old probe method for modesetting
[  1989.910] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  1989.910] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[  1989.910] (==) NVIDIA(0): RGB weight 888
[  1989.910] (==) NVIDIA(0): Default visual is TrueColor
[  1989.910] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  1989.910] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[  1989.910] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[  1989.910] (**) NVIDIA(0): Enabling 2D acceleration
[  1989.910] (II) Loading sub module "glxserver_nvidia"
[  1989.910] (II) LoadModule: "glxserver_nvidia"
[  1989.910] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[  1989.917] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[  1989.917] 	compiled for 1.6.99.901, module version = 1.0.0
[  1989.917] 	Module class: X.Org Server Extension
[  1989.917] (II) NVIDIA GLX Module  470.103.01  Thu Jan  6 12:16:55 UTC 2022
[  1989.917] (II) NVIDIA: The X server supports PRIME Render Offload.
[  1990.134] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[  1990.134] (--) NVIDIA(0):     CRT-0
[  1990.134] (--) NVIDIA(0):     DFP-0
[  1990.134] (--) NVIDIA(0):     DFP-1
[  1990.134] (--) NVIDIA(0):     DFP-2
[  1990.134] (--) NVIDIA(0):     DFP-3
[  1990.134] (--) NVIDIA(0):     DFP-4 (boot)
[  1990.134] (--) NVIDIA(0):     DFP-5
[  1990.134] (--) NVIDIA(0):     DFP-6
[  1990.135] (II) NVIDIA(0): NVIDIA GPU Quadro K2000M (GK107GL) at PCI:1:0:0 (GPU-0)
[  1990.135] (--) NVIDIA(0): Memory: 2097152 kBytes
[  1990.135] (--) NVIDIA(0): VideoBIOS: 80.07.40.00.02
[  1990.135] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[  1990.147] (--) NVIDIA(GPU-0): Samsung SyncMaster (CRT-0): connected
[  1990.147] (--) NVIDIA(GPU-0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
[  1990.147] (--) NVIDIA(GPU-0): 
[  1990.148] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  1990.148] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[  1990.148] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[  1990.148] (--) NVIDIA(GPU-0): 
[  1990.149] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  1990.149] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[  1990.149] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[  1990.149] (--) NVIDIA(GPU-0): 
[  1990.150] (--) NVIDIA(GPU-0): DFP-2: disconnected
[  1990.150] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[  1990.150] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[  1990.150] (--) NVIDIA(GPU-0): 
[  1990.150] (--) NVIDIA(GPU-0): DFP-3: disconnected
[  1990.150] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[  1990.150] (--) NVIDIA(GPU-0): DFP-3: 960.0 MHz maximum pixel clock
[  1990.150] (--) NVIDIA(GPU-0): 
[  1990.150] (--) NVIDIA(GPU-0): LGD (DFP-4): connected
[  1990.150] (--) NVIDIA(GPU-0): LGD (DFP-4): Internal DisplayPort
[  1990.150] (--) NVIDIA(GPU-0): LGD (DFP-4): 960.0 MHz maximum pixel clock
[  1990.150] (--) NVIDIA(GPU-0): 
[  1990.150] (--) NVIDIA(GPU-0): DFP-5: disconnected
[  1990.150] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[  1990.150] (--) NVIDIA(GPU-0): DFP-5: 960.0 MHz maximum pixel clock
[  1990.150] (--) NVIDIA(GPU-0): 
[  1990.150] (--) NVIDIA(GPU-0): DFP-6: disconnected
[  1990.150] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[  1990.150] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[  1990.150] (--) NVIDIA(GPU-0): 
[  1990.153] (==) NVIDIA(0): 
[  1990.153] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[  1990.153] (==) NVIDIA(0):     will be used as the requested mode.
[  1990.153] (==) NVIDIA(0): 
[  1990.153] (II) NVIDIA(0): Validated MetaModes:
[  1990.153] (II) NVIDIA(0):     "DFP-4:nvidia-auto-select,CRT-0:nvidia-auto-select"
[  1990.153] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080
[  1990.155] (--) NVIDIA(0): DPI set to (139, 144); computed from "UseEdidDpi" X config
[  1990.155] (--) NVIDIA(0):     option
[  1990.155] (II) UnloadModule: "modesetting"
[  1990.155] (II) Unloading modesetting
[  1990.156] (II) NVIDIA: Reserving 6144.00 MB of virtual memory for indirect memory
[  1990.156] (II) NVIDIA:     access.
[  1990.159] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[  1990.159] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[  1990.159] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[  1990.159] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[  1990.159] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[  1990.159] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[  1990.159] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[  1990.159] (II) NVIDIA(0):     Config Options in the README.
[  1990.178] (II) NVIDIA(0): Setting mode "DFP-4:nvidia-auto-select,CRT-0:nvidia-auto-select"
[  1991.283] (==) NVIDIA(0): Disabling shared memory pixmaps
[  1991.283] (==) NVIDIA(0): Backing store enabled
[  1991.283] (==) NVIDIA(0): Silken mouse enabled
[  1991.283] (==) NVIDIA(0): DPMS enabled
[  1991.283] (II) Loading sub module "dri2"
[  1991.283] (II) LoadModule: "dri2"
[  1991.283] (II) Module "dri2" already built-in
[  1991.283] (II) NVIDIA(0): [DRI2] Setup complete
[  1991.283] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[  1991.284] (II) Initializing extension Generic Event Extension
[  1991.284] (II) Initializing extension SHAPE
[  1991.284] (II) Initializing extension MIT-SHM
[  1991.284] (II) Initializing extension XInputExtension
[  1991.284] (II) Initializing extension XTEST
[  1991.284] (II) Initializing extension BIG-REQUESTS
[  1991.284] (II) Initializing extension SYNC
[  1991.284] (II) Initializing extension XKEYBOARD
[  1991.285] (II) Initializing extension XC-MISC
[  1991.285] (II) Initializing extension SECURITY
[  1991.285] (II) Initializing extension XFIXES
[  1991.285] (II) Initializing extension RENDER
[  1991.285] (II) Initializing extension RANDR
[  1991.285] (II) Initializing extension COMPOSITE
[  1991.285] (II) Initializing extension DAMAGE
[  1991.285] (II) Initializing extension MIT-SCREEN-SAVER
[  1991.285] (II) Initializing extension DOUBLE-BUFFER
[  1991.285] (II) Initializing extension RECORD
[  1991.285] (II) Initializing extension DPMS
[  1991.286] (II) Initializing extension Present
[  1991.286] (II) Initializing extension DRI3
[  1991.286] (II) Initializing extension X-Resource
[  1991.286] (II) Initializing extension XVideo
[  1991.286] (II) Initializing extension XVideo-MotionCompensation
[  1991.286] (II) Initializing extension GLX
[  1991.286] (II) Initializing extension GLX
[  1991.286] (II) Indirect GLX disabled.
[  1991.286] (II) GLX: Another vendor is already registered for screen 0
[  1991.286] (II) Initializing extension XFree86-VidModeExtension
[  1991.286] (II) Initializing extension XFree86-DGA
[  1991.286] (II) Initializing extension XFree86-DRI
[  1991.286] (II) Initializing extension DRI2
[  1991.286] (II) Initializing extension NV-GLX
[  1991.286] (II) Initializing extension NV-CONTROL
[  1991.286] (II) Initializing extension XINERAMA
[  1991.364] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  1991.364] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  1991.364] (II) LoadModule: "libinput"
[  1991.364] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[  1991.366] (II) Module libinput: vendor="X.Org Foundation"
[  1991.366] 	compiled for 1.21.1.3, module version = 1.2.1
[  1991.366] 	Module class: X.Org XInput Driver
[  1991.366] 	ABI class: X.Org XInput driver, version 24.4
[  1991.366] (II) Using input driver 'libinput' for 'Power Button'
[  1991.367] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 39 paused 0
[  1991.367] (**) Power Button: always reports core events
[  1991.367] (**) Option "Device" "/dev/input/event2"
[  1991.369] (II) event2  - Power Button: is tagged by udev as: Keyboard
[  1991.369] (II) event2  - Power Button: device is a keyboard
[  1991.369] (II) event2  - Power Button: device removed
[  1991.369] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[  1991.369] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1991.369] (II) event2  - Power Button: is tagged by udev as: Keyboard
[  1991.369] (II) event2  - Power Button: device is a keyboard
[  1991.370] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[  1991.370] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  1991.370] (II) Using input driver 'libinput' for 'Video Bus'
[  1991.371] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 42 paused 0
[  1991.371] (**) Video Bus: always reports core events
[  1991.371] (**) Option "Device" "/dev/input/event10"
[  1991.372] (II) event10 - Video Bus: is tagged by udev as: Keyboard
[  1991.372] (II) event10 - Video Bus: device is a keyboard
[  1991.372] (II) event10 - Video Bus: device removed
[  1991.372] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input14/event10"
[  1991.372] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  1991.373] (II) event10 - Video Bus: is tagged by udev as: Keyboard
[  1991.373] (II) event10 - Video Bus: device is a keyboard
[  1991.374] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[  1991.374] (II) No input driver specified, ignoring this device.
[  1991.374] (II) This device may have been added with another device file.
[  1991.374] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[  1991.374] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[  1991.374] (II) Using input driver 'libinput' for 'Sleep Button'
[  1991.375] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 43 paused 0
[  1991.375] (**) Sleep Button: always reports core events
[  1991.375] (**) Option "Device" "/dev/input/event0"
[  1991.376] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[  1991.376] (II) event0  - Sleep Button: device is a keyboard
[  1991.376] (II) event0  - Sleep Button: device removed
[  1991.376] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[  1991.376] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[  1991.377] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[  1991.377] (II) event0  - Sleep Button: device is a keyboard
[  1991.378] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)
[  1991.378] (II) No input driver specified, ignoring this device.
[  1991.378] (II) This device may have been added with another device file.
[  1991.378] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
[  1991.378] (II) No input driver specified, ignoring this device.
[  1991.378] (II) This device may have been added with another device file.
[  1991.378] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
[  1991.378] (II) No input driver specified, ignoring this device.
[  1991.378] (II) This device may have been added with another device file.
[  1991.379] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event16)
[  1991.379] (II) No input driver specified, ignoring this device.
[  1991.379] (II) This device may have been added with another device file.
[  1991.379] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event17)
[  1991.379] (II) No input driver specified, ignoring this device.
[  1991.379] (II) This device may have been added with another device file.
[  1991.379] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event4)
[  1991.379] (**) USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[  1991.379] (II) Using input driver 'libinput' for 'USB Optical Mouse'
[  1991.437] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 44 paused 0
[  1991.437] (**) USB Optical Mouse: always reports core events
[  1991.437] (**) Option "Device" "/dev/input/event4"
[  1991.438] (II) event4  - USB Optical Mouse: is tagged by udev as: Mouse
[  1991.438] (II) event4  - USB Optical Mouse: device is a pointer
[  1991.438] (II) event4  - USB Optical Mouse: device removed
[  1991.439] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:1BCF:0005.0001/input/input8/event4"
[  1991.439] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 9)
[  1991.439] (**) Option "AccelerationScheme" "none"
[  1991.439] (**) USB Optical Mouse: (accel) selected scheme none/0
[  1991.439] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[  1991.439] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[  1991.440] (II) event4  - USB Optical Mouse: is tagged by udev as: Mouse
[  1991.440] (II) event4  - USB Optical Mouse: device is a pointer
[  1991.441] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[  1991.441] (II) No input driver specified, ignoring this device.
[  1991.441] (II) This device may have been added with another device file.
[  1991.441] (II) config/udev: Adding input device USB Keyboard (/dev/input/event5)
[  1991.441] (**) USB Keyboard: Applying InputClass "libinput keyboard catchall"
[  1991.441] (II) Using input driver 'libinput' for 'USB Keyboard'
[  1991.443] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 45 paused 0
[  1991.443] (**) USB Keyboard: always reports core events
[  1991.443] (**) Option "Device" "/dev/input/event5"
[  1991.444] (II) event5  - USB Keyboard: is tagged by udev as: Keyboard
[  1991.444] (II) event5  - USB Keyboard: device is a keyboard
[  1991.444] (II) event5  - USB Keyboard: device removed
[  1991.444] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:04D9:4545.0002/input/input9/event5"
[  1991.444] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 10)
[  1991.445] (II) event5  - USB Keyboard: is tagged by udev as: Keyboard
[  1991.445] (II) event5  - USB Keyboard: device is a keyboard
[  1991.446] (II) config/udev: Adding input device USB Keyboard Consumer Control (/dev/input/event6)
[  1991.446] (**) USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[  1991.446] (II) Using input driver 'libinput' for 'USB Keyboard Consumer Control'
[  1991.447] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 46 paused 0
[  1991.447] (**) USB Keyboard Consumer Control: always reports core events
[  1991.448] (**) Option "Device" "/dev/input/event6"
[  1991.449] (II) event6  - USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[  1991.449] (II) event6  - USB Keyboard Consumer Control: device is a keyboard
[  1991.449] (II) event6  - USB Keyboard Consumer Control: device removed
[  1991.449] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:04D9:4545.0003/input/input10/event6"
[  1991.449] (II) XINPUT: Adding extended input device "USB Keyboard Consumer Control" (type: KEYBOARD, id 11)
[  1991.451] (II) event6  - USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[  1991.451] (II) event6  - USB Keyboard Consumer Control: device is a keyboard
[  1991.452] (II) config/udev: Adding input device USB Keyboard System Control (/dev/input/event7)
[  1991.452] (**) USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[  1991.452] (II) Using input driver 'libinput' for 'USB Keyboard System Control'
[  1991.452] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 47 paused 0
[  1991.452] (**) USB Keyboard System Control: always reports core events
[  1991.452] (**) Option "Device" "/dev/input/event7"
[  1991.454] (II) event7  - USB Keyboard System Control: is tagged by udev as: Keyboard
[  1991.454] (II) event7  - USB Keyboard System Control: device is a keyboard
[  1991.454] (II) event7  - USB Keyboard System Control: device removed
[  1991.454] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:04D9:4545.0003/input/input11/event7"
[  1991.454] (II) XINPUT: Adding extended input device "USB Keyboard System Control" (type: KEYBOARD, id 12)
[  1991.455] (II) event7  - USB Keyboard System Control: is tagged by udev as: Keyboard
[  1991.455] (II) event7  - USB Keyboard System Control: device is a keyboard
[  1991.456] (II) config/udev: Adding input device HP HD Webcam [Fixed]: HP HD Web (/dev/input/event23)
[  1991.456] (**) HP HD Webcam [Fixed]: HP HD Web: Applying InputClass "libinput keyboard catchall"
[  1991.456] (II) Using input driver 'libinput' for 'HP HD Webcam [Fixed]: HP HD Web'
[  1991.457] (II) systemd-logind: got fd for /dev/input/event23 13:87 fd 48 paused 0
[  1991.457] (**) HP HD Webcam [Fixed]: HP HD Web: always reports core events
[  1991.457] (**) Option "Device" "/dev/input/event23"
[  1991.458] (II) event23 - HP HD Webcam [Fixed]: HP HD Web: is tagged by udev as: Keyboard
[  1991.458] (II) event23 - HP HD Webcam [Fixed]: HP HD Web: device is a keyboard
[  1991.458] (II) event23 - HP HD Webcam [Fixed]: HP HD Web: device removed
[  1991.458] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input30/event23"
[  1991.458] (II) XINPUT: Adding extended input device "HP HD Webcam [Fixed]: HP HD Web" (type: KEYBOARD, id 13)
[  1991.459] (II) event23 - HP HD Webcam [Fixed]: HP HD Web: is tagged by udev as: Keyboard
[  1991.459] (II) event23 - HP HD Webcam [Fixed]: HP HD Web: device is a keyboard
[  1991.460] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event19)
[  1991.460] (II) No input driver specified, ignoring this device.
[  1991.460] (II) This device may have been added with another device file.
[  1991.460] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event20)
[  1991.460] (II) No input driver specified, ignoring this device.
[  1991.460] (II) This device may have been added with another device file.
[  1991.460] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event21)
[  1991.460] (II) No input driver specified, ignoring this device.
[  1991.460] (II) This device may have been added with another device file.
[  1991.461] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event22)
[  1991.461] (II) No input driver specified, ignoring this device.
[  1991.461] (II) This device may have been added with another device file.
[  1991.461] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[  1991.461] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[  1991.461] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[  1991.462] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 49 paused 0
[  1991.462] (**) AT Translated Set 2 keyboard: always reports core events
[  1991.462] (**) Option "Device" "/dev/input/event3"
[  1991.463] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[  1991.463] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[  1991.464] (II) event3  - AT Translated Set 2 keyboard: device removed
[  1991.464] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[  1991.464] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[  1991.464] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[  1991.464] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[  1991.466] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event18)
[  1991.466] (**) PS/2 Generic Mouse: Applying InputClass "libinput pointer catchall"
[  1991.466] (II) Using input driver 'libinput' for 'PS/2 Generic Mouse'
[  1991.466] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 50 paused 0
[  1991.466] (**) PS/2 Generic Mouse: always reports core events
[  1991.466] (**) Option "Device" "/dev/input/event18"
[  1991.467] (II) event18 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[  1991.467] (II) event18 - PS/2 Generic Mouse: device is a pointer
[  1991.468] (II) event18 - PS/2 Generic Mouse: device removed
[  1991.468] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input16/event18"
[  1991.468] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 15)
[  1991.468] (**) Option "AccelerationScheme" "none"
[  1991.468] (**) PS/2 Generic Mouse: (accel) selected scheme none/0
[  1991.468] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[  1991.468] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[  1991.468] (II) event18 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[  1991.468] (II) event18 - PS/2 Generic Mouse: device is a pointer
[  1991.469] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[  1991.469] (II) No input driver specified, ignoring this device.
[  1991.469] (II) This device may have been added with another device file.
[  1991.469] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event24)
[  1991.470] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[  1991.470] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[  1991.470] (II) systemd-logind: got fd for /dev/input/event24 13:88 fd 51 paused 0
[  1991.470] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  1991.470] (**) Option "Device" "/dev/input/event24"
[  1991.471] (II) event24 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[  1991.472] (II) event24 - SynPS/2 Synaptics TouchPad: device is a touchpad
[  1991.472] (II) event24 - SynPS/2 Synaptics TouchPad: device removed
[  1991.473] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input25/event24"
[  1991.473] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 16)
[  1991.473] (**) Option "AccelerationScheme" "none"
[  1991.473] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[  1991.473] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[  1991.473] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[  1991.474] (II) event24 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[  1991.475] (II) event24 - SynPS/2 Synaptics TouchPad: device is a touchpad
[  1991.476] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[  1991.476] (II) No input driver specified, ignoring this device.
[  1991.476] (II) This device may have been added with another device file.
[  1991.476] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event11)
[  1991.476] (II) No input driver specified, ignoring this device.
[  1991.476] (II) This device may have been added with another device file.
[  1991.476] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[  1991.476] (II) No input driver specified, ignoring this device.
[  1991.476] (II) This device may have been added with another device file.
[  1991.477] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[  1991.477] (II) No input driver specified, ignoring this device.
[  1991.477] (II) This device may have been added with another device file.
[  1991.479] (II) config/udev: Adding input device Wireless hotkeys (/dev/input/event9)
[  1991.479] (**) Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[  1991.479] (II) Using input driver 'libinput' for 'Wireless hotkeys'
[  1991.479] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 52 paused 0
[  1991.479] (**) Wireless hotkeys: always reports core events
[  1991.479] (**) Option "Device" "/dev/input/event9"
[  1991.480] (II) event9  - Wireless hotkeys: is tagged by udev as: Keyboard
[  1991.480] (II) event9  - Wireless hotkeys: device is a keyboard
[  1991.480] (II) event9  - Wireless hotkeys: device removed
[  1991.480] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event9"
[  1991.480] (II) XINPUT: Adding extended input device "Wireless hotkeys" (type: KEYBOARD, id 17)
[  1991.481] (II) event9  - Wireless hotkeys: is tagged by udev as: Keyboard
[  1991.481] (II) event9  - Wireless hotkeys: device is a keyboard
[  1991.481] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event12)
[  1991.481] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[  1991.481] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[  1991.482] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 53 paused 0
[  1991.482] (**) HP WMI hotkeys: always reports core events
[  1991.482] (**) Option "Device" "/dev/input/event12"
[  1991.483] (II) event12 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[  1991.483] (II) event12 - HP WMI hotkeys: device is a keyboard
[  1991.483] (II) event12 - HP WMI hotkeys: device removed
[  1991.483] (**) Option "config_info" "udev:/sys/devices/virtual/input/input17/event12"
[  1991.483] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 18)
[  1991.483] (II) event12 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[  1991.484] (II) event12 - HP WMI hotkeys: device is a keyboard
[  1991.488] (--) NVIDIA(GPU-0): LGD (DFP-4): connected
[  1991.488] (--) NVIDIA(GPU-0): LGD (DFP-4): Internal DisplayPort
[  1991.488] (--) NVIDIA(GPU-0): LGD (DFP-4): 960.0 MHz maximum pixel clock
[  1991.488] (--) NVIDIA(GPU-0): 
[  1991.516] (**) Option "fd" "39"
[  1991.516] (II) event2  - Power Button: device removed
[  1991.516] (**) Option "fd" "42"
[  1991.516] (II) event10 - Video Bus: device removed
[  1991.516] (**) Option "fd" "43"
[  1991.516] (II) event0  - Sleep Button: device removed
[  1991.516] (**) Option "fd" "44"
[  1991.516] (II) event4  - USB Optical Mouse: device removed
[  1991.516] (**) Option "fd" "45"
[  1991.516] (II) event5  - USB Keyboard: device removed
[  1991.516] (**) Option "fd" "46"
[  1991.516] (II) event6  - USB Keyboard Consumer Control: device removed
[  1991.516] (**) Option "fd" "47"
[  1991.516] (II) event7  - USB Keyboard System Control: device removed
[  1991.516] (**) Option "fd" "48"
[  1991.516] (II) event23 - HP HD Webcam [Fixed]: HP HD Web: device removed
[  1991.516] (**) Option "fd" "49"
[  1991.516] (II) event3  - AT Translated Set 2 keyboard: device removed
[  1991.516] (**) Option "fd" "50"
[  1991.516] (II) event18 - PS/2 Generic Mouse: device removed
[  1991.517] (**) Option "fd" "51"
[  1991.517] (II) event24 - SynPS/2 Synaptics TouchPad: device removed
[  1991.517] (**) Option "fd" "52"
[  1991.517] (II) event9  - Wireless hotkeys: device removed
[  1991.517] (**) Option "fd" "53"
[  1991.517] (II) event12 - HP WMI hotkeys: device removed
[  1991.518] (II) UnloadModule: "libinput"
[  1991.518] (II) systemd-logind: releasing fd for 13:76
[  1991.546] (II) UnloadModule: "libinput"
[  1991.546] (II) systemd-logind: releasing fd for 13:73
[  1991.589] (II) UnloadModule: "libinput"
[  1991.590] (II) systemd-logind: releasing fd for 13:88
[  1991.623] (II) UnloadModule: "libinput"
[  1991.623] (II) systemd-logind: releasing fd for 13:82
[  1991.666] (II) UnloadModule: "libinput"
[  1991.666] (II) systemd-logind: releasing fd for 13:67
[  1991.683] (II) UnloadModule: "libinput"
[  1991.683] (II) systemd-logind: releasing fd for 13:87
[  1991.716] (II) UnloadModule: "libinput"
[  1991.716] (II) systemd-logind: releasing fd for 13:71
[  1991.733] (II) UnloadModule: "libinput"
[  1991.733] (II) systemd-logind: releasing fd for 13:70
[  1991.766] (II) UnloadModule: "libinput"
[  1991.766] (II) systemd-logind: releasing fd for 13:69
[  1991.783] (II) UnloadModule: "libinput"
[  1991.783] (II) systemd-logind: releasing fd for 13:68
[  1991.816] (II) UnloadModule: "libinput"
[  1991.816] (II) systemd-logind: releasing fd for 13:64
[  1991.833] (II) UnloadModule: "libinput"
[  1991.833] (II) systemd-logind: releasing fd for 13:74
[  1991.867] (II) UnloadModule: "libinput"
[  1991.867] (II) systemd-logind: releasing fd for 13:66
[  1992.918] (II) NVIDIA(GPU-0): Deleting GPU-0
[  1992.921] (II) Server terminated successfully (0). Closing log file.

my .xinitrc sucks

Offline

#23 2022-05-01 15:05:18

seth
Member
Registered: 2012-09-03
Posts: 52,235

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

There's no error - the server runs for 3 seconds and then terminates cleanly.
This is down to whatever your session is supposed to be.

Online

#24 2022-05-01 15:08:59

Aram1s
Member
Registered: 2022-01-16
Posts: 25

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

How can I avoid it terminating after 3 seconds?


my .xinitrc sucks

Offline

#25 2022-05-01 15:12:53

seth
Member
Registered: 2012-09-03
Posts: 52,235

Re: xinit: unable to connect to X server: Connection refused [SOLVED]

By starting a proper X11 session, depending on what you do likely fixing your xinitrc?

How did you install archlinux? What tutorial did you follow?

Online

Board footer

Powered by FluxBB