You are not logged in.
- Topics: Active | Unanswered
#1 2022-06-01 11:08:34
- WeebSpirit
- Member
- Registered: 2021-10-27
- Posts: 91
External headphone mic not recognised.
I'm using pipewire, pipewire-pulse is also installed. I have an Acer Nitro AN515-44 V1.04. It only has 1 mini jack port, i plugged my headphones (Hator hypergang evo), output works fine, but the microphone is not recognised, if testing with pavucontrol, it only shows Microphone, element web in chromium detects it as Family 17h/19h HD Audio Controller Analog Stereo. I did some googling and found this thread: https://forums.linuxmint.com/viewtopic.php?t=352073.
But
cat /proc/asound/card*/codec* | grep Codecgives
Codec: Nvidia GPU 94 HDMI/DP
Codec: Realtek ALC295I did add this into /etc/modprobe.d/alsa-base.conf, resulting in
options snd-hda-intel model=Nvidia GPU 94 HDMI/DP,Realtek ALC295But the mic still doesn't get recognised.
Last edited by WeebSpirit (2022-06-02 16:15:19)
Offline
#2 2022-06-01 11:25:16
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 23,940
Re: External headphone mic not recognised.
That model list is invalid (and it doesn't make much sense to use the same exact model that is already autodetected, if that was working you wouldn't need to try to manipulate it), the available values are listed in https://www.kernel.org/doc/html/latest/ … odels.html judging by the thread you found what you want to test is.
# model=auto handles the nvidia hdmi with the standard codec, dell-headset-multi applies the relevant model override over your detected alc codec, other potential alternatives to dell-headset-multi: headset-mic, aspire-headset-mic
options snd-hda-intel model=auto,dell-headset-multiNote you need to reboot for these to apply.
Last edited by V1del (2022-06-01 11:29:12)
Offline
#3 2022-06-01 11:41:28
- WeebSpirit
- Member
- Registered: 2021-10-27
- Posts: 91
Re: External headphone mic not recognised.
V1del wrote:
That model list is invalid (and it doesn't make much sense to use the same exact model that is already autodetected, if that was working you wouldn't need to try to manipulate it), the available values are listed in https://www.kernel.org/doc/html/latest/ … odels.html judging by the thread you found what you want to test is.
# model=auto handles the nvidia hdmi with the standard codec, dell-headset-multi applies the relevant model override over your detected alc codec, other potential alternatives to dell-headset-multi: headset-mic, aspire-headset-mic options snd-hda-intel model=auto,dell-headset-multiNote you need to reboot for these to apply.
Thank you, now it has Internal Microphone, Headset Microphone and Microphone. Headset microphone seems to be the right one. Thanks.
Offline
#4 2022-06-02 16:15:07
- WeebSpirit
- Member
- Registered: 2021-10-27
- Posts: 91
Re: External headphone mic not recognised.
I didn't do enough testing, reopening. I tried to use jitsi today, and it only detects the laptop mic + i also wanted to try noisetorch, and it also only detects the laptop mic. I tried setting headset-mic instead of dell-headset-multi, pavucontrol doesn't detect, then tried aspire-headset-mic, detected by pavucontrol, but not detected by noisetorch. I don't really know what else should i say
Offline
#5 2022-06-03 08:42:11
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 23,940
Re: External headphone mic not recognised.
If it works properly in pavucontrol/ALSA it will work properly for everything that hooks on pulseaudio including noisetorch. Create the logically working situation from a pulse perspective then post
arecord -lL
pacmd list-cards
pacmd list-sources
pacmd list-source-outputswhile trying to use noisetorch/currently not working application
Offline
#6 2022-06-03 09:07:16
- WeebSpirit
- Member
- Registered: 2021-10-27
- Posts: 91
Re: External headphone mic not recognised.
V1del wrote:
If it works properly in pavucontrol/ALSA it will work properly for everything that hooks on pulseaudio including noisetorch. Create the logically working situation from a pulse perspective then post
arecord -lL pacmd list-cards pacmd list-sources pacmd list-source-outputswhile trying to use noisetorch/currently not working application
Maybe i forgot to mention, but I use pipewire with pipewire-pulse, pulseaudio conflicts with pipewire-pulse, so pacmd isn't found. Do i need to remove pipewire and replace it with pulseaudio?
arecord -lL results in:
null
Discard all samples (playback) or generate zero samples (capture)
lavrate
Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
Rate Converter Plugin Using Samplerate Library
speexrate
Rate Converter Plugin Using Speex Resampler
jack
JACK Audio Connection Kit
oss
Open Sound System
pipewire
PipeWire Sound Server
pulse
PulseAudio Sound Server
speex
Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
Plugin for channel upmix (4,6,8)
vdownmix
Plugin for channel downmix (stereo) with a simple spacialization
default
Default ALSA Output (currently PipeWire Media Server)
usbstream:CARD=NVidia
HDA NVidia
USB Stream Output
sysdefault:CARD=Generic
HD-Audio Generic, ALC295 Analog
Default Audio Device
front:CARD=Generic,DEV=0
HD-Audio Generic, ALC295 Analog
Front output / input
usbstream:CARD=Generic
HD-Audio Generic
USB Stream Output
**** List of CAPTURE Hardware Devices ****
card 1: Generic [HD-Audio Generic], device 0: ALC295 Analog [ALC295 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0Offline
#7 2022-06-07 08:05:49
- WeebSpirit
- Member
- Registered: 2021-10-27
- Posts: 91
Re: External headphone mic not recognised.
Okay, I made pulseaudio to work, removing pipewire-pulse. Here's the outputs:
arecord -lL returns:
null
Discard all samples (playback) or generate zero samples (capture)
lavrate
Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
Rate Converter Plugin Using Samplerate Library
speexrate
Rate Converter Plugin Using Speex Resampler
jack
JACK Audio Connection Kit
oss
Open Sound System
pipewire
PipeWire Sound Server
pulse
PulseAudio Sound Server
speex
Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
Plugin for channel upmix (4,6,8)
vdownmix
Plugin for channel downmix (stereo) with a simple spacialization
default
Default ALSA Output (currently PipeWire Media Server)
usbstream:CARD=NVidia
HDA NVidia
USB Stream Output
sysdefault:CARD=Generic
HD-Audio Generic, ALC295 Analog
Default Audio Device
front:CARD=Generic,DEV=0
HD-Audio Generic, ALC295 Analog
Front output / input
usbstream:CARD=Generic
HD-Audio Generic
USB Stream Output
**** List of CAPTURE Hardware Devices ****
card 1: Generic [HD-Audio Generic], device 0: ALC295 Analog [ALC295 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0pacmd list-cards returns:
2 card(s) available.
index: 0
name: <alsa_card.pci-0000_01_00.1>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xd1000000 irq 97"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "10fa"
device.string = "0"
device.description = "HDA NVidia"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 600, available: no)
off: Off (priority 0, available: unknown)
active profile: <off>
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
index: 1
name: <alsa_card.pci-0000_05_00.6>
driver: <module-alsa-card.c>
owner module: 7
properties:
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xd15c0000 irq 98"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:05:00.6"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "15e3"
device.product.name = "Family 17h/19h HD Audio Controller"
device.string = "1"
device.description = "Family 17h/19h HD Audio Controller"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Analog Stereo Input (priority 32833, available: unknown)
output:analog-stereo: Analog Stereo Output (priority 39268, available: unknown)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 39333, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <output:analog-stereo+input:analog-stereo>
sinks:
alsa_output.pci-0000_05_00.6.analog-stereo/#0: Family 17h/19h HD Audio Controller Analog Stereo
sources:
alsa_output.pci-0000_05_00.6.analog-stereo.monitor/#0: Monitor of Family 17h/19h HD Audio Controller Analog Stereo
alsa_input.pci-0000_05_00.6.analog-stereo/#1: Family 17h/19h HD Audio Controller Analog Stereo
ports:
analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-headset-mic: Headset Microphone (priority 8800, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-headphones"pacmd list-sources returns:
2 source(s) available.
index: 0
name: <alsa_output.pci-0000_05_00.6.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: APPLICATION|IDLE
priority: 1030
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
monitor_of: 0
card: 1 <alsa_card.pci-0000_05_00.6>
module: 7
properties:
device.description = "Monitor of Family 17h/19h HD Audio Controller Analog Stereo"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xd15c0000 irq 98"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:05:00.6"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "15e3"
device.product.name = "Family 17h/19h HD Audio Controller"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
* index: 1
name: <alsa_input.pci-0000_05_00.6.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: APPLICATION|IDLE
priority: 9039
volume: front-left: 9258 / 14% / -51.00 dB, front-right: 9258 / 14% / -51.00 dB
balance 0.00
base volume: 6554 / 10% / -60.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
card: 1 <alsa_card.pci-0000_05_00.6>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC295 Analog"
alsa.id = "ALC295 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xd15c0000 irq 98"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:05:00.6"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "15e3"
device.product.name = "Family 17h/19h HD Audio Controller"
device.string = "front:1"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Family 17h/19h HD Audio Controller Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-headset-mic: Headset Microphone (priority 8800, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
active port: <analog-input-internal-mic>pacmd list-source-outputs returns:
0 source output(s) available.Offline
#8 2022-06-07 14:49:14
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 23,940
Re: External headphone mic not recognised.
You can also do that with pipewire, the thing of most interest here would be the source-outputs while actually trying to record something and having noisetorch or so active. If you want to switch back to pipewire you can change the other commands to
pactl list cards
pactl list sources
pactl list source-outputsrespectively.
Offline
#9 2022-06-08 11:16:24
- WeebSpirit
- Member
- Registered: 2021-10-27
- Posts: 91
Re: External headphone mic not recognised.
V1del wrote:
You can also do that with pipewire, the thing of most interest here would be the source-outputs while actually trying to record something and having noisetorch or so active. If you want to switch back to pipewire you can change the other commands to
pactl list cards pactl list sources pactl list source-outputsrespectively.
Okay, noisetorch is now working with the laptop built in mic, here's the outputs:
pactl list cards:
Card #45
Name: alsa_card.pci-0000_01_00.1
Driver: alsa
Owner Module: n/a
Properties:
device.enum.api = "udev"
device.api = "alsa"
media.class = "Audio/Device"
api.alsa.path = "hw:0"
api.alsa.card = "0"
api.alsa.card.name = "HDA NVidia"
api.alsa.card.longname = "HDA NVidia at 0xd1000000 irq 80"
device.plugged.usec = "2245388"
device.bus_path = "pci-0000:01:00.1"
device.sysfs.path = "/sys/devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0"
device.bus = "pci"
device.subsystem = "sound"
device.vendor.id = "4318"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "4346"
device.name = "alsa_card.pci-0000_01_00.1"
device.description = "HDA NVidia"
device.nick = "HDA NVidia"
device.icon_name = "audio-card-pci"
api.alsa.use-acp = "true"
api.acp.auto-profile = "false"
api.acp.auto-port = "false"
api.dbus.ReserveDevice1 = "Audio0"
factory.id = "14"
client.id = "31"
object.id = "44"
object.serial = "45"
object.path = "alsa:pcm:0"
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xd1000000 irq 80"
alsa.driver_name = "snd_hda_intel"
device.string = "0"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
pro-audio: Pro Audio (sinks: 4, sources: 0, priority: 1, available: yes)
Active Profile: off
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 1"
device.icon_name = "video-display"
card.profile.port = "0"
Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 2"
device.icon_name = "video-display"
card.profile.port = "1"
Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 3"
device.icon_name = "video-display"
card.profile.port = "2"
Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 4"
device.icon_name = "video-display"
card.profile.port = "3"
Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3
Card #46
Name: alsa_card.pci-0000_05_00.6
Driver: alsa
Owner Module: n/a
Properties:
device.enum.api = "udev"
device.api = "alsa"
media.class = "Audio/Device"
api.alsa.path = "hw:1"
api.alsa.card = "1"
api.alsa.card.name = "HD-Audio Generic"
api.alsa.card.longname = "HD-Audio Generic at 0xd15c0000 irq 81"
device.plugged.usec = "4257943"
device.bus_path = "pci-0000:05:00.6"
device.sysfs.path = "/sys/devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card1"
device.bus = "pci"
device.subsystem = "sound"
device.vendor.id = "4130"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "5603"
device.product.name = "Family 17h/19h HD Audio Controller"
device.name = "alsa_card.pci-0000_05_00.6"
device.description = "Family 17h/19h HD Audio Controller"
device.nick = "HD-Audio Generic"
device.icon_name = "audio-card-pci"
api.alsa.use-acp = "true"
api.acp.auto-profile = "false"
api.acp.auto-port = "false"
api.dbus.ReserveDevice1 = "Audio1"
factory.id = "14"
client.id = "31"
object.id = "45"
object.serial = "46"
object.path = "alsa:pcm:1"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xd15c0000 irq 81"
alsa.driver_name = "snd_hda_intel"
device.string = "1"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
pro-audio: Pro Audio (sinks: 1, sources: 1, priority: 1, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-internal-mic: Internal Microphone (type: Mic, priority: 8900, latency offset: 0 usec, availability group: Legacy 1, availability unknown)
Properties:
port.type = "mic"
port.availability-group = "Legacy 1"
device.icon_name = "audio-input-microphone"
card.profile.port = "0"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
analog-input-headset-mic: Headset Microphone (type: Headset, priority: 8800, latency offset: 0 usec, availability group: Legacy 2, availability unknown)
Properties:
port.type = "headset"
port.availability-group = "Legacy 2"
device.icon_name = "audio-input-microphone"
card.profile.port = "1"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-speaker: Speakers (type: Speaker, priority: 10000, latency offset: 0 usec, availability group: Legacy 3, not available)
Properties:
port.type = "speaker"
port.availability-group = "Legacy 3"
device.icon_name = "audio-speakers"
card.profile.port = "2"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 2, availability unknown)
Properties:
port.type = "headphones"
port.availability-group = "Legacy 2"
device.icon_name = "audio-headphones"
card.profile.port = "3"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereopactl list sources:
Source #49
State: SUSPENDED
Name: alsa_output.pci-0000_05_00.6.analog-stereo.monitor
Description: Monitor of Family 17h/19h HD Audio Controller Analog Stereo
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_05_00.6.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
object.path = "alsa:pcm:1:front:1:playback"
api.alsa.path = "front:1"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
device.routes = "2"
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "monitor"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC295 Analog"
alsa.id = "ALC295 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xd15c0000 irq 81"
alsa.driver_name = "snd_hda_intel"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
card.profile.device = "3"
device.id = "45"
factory.name = "api.alsa.pcm.sink"
priority.driver = "945"
priority.session = "945"
media.class = "Audio/Sink"
node.nick = "HD-Audio Generic"
node.name = "alsa_output.pci-0000_05_00.6.analog-stereo"
device.description = "Family 17h/19h HD Audio Controller Analog Stereo"
device.icon_name = "audio-card-analog"
device.bus = "pci"
device.bus_path = "pci-0000:05:00.6"
node.pause-on-idle = "false"
factory.id = "18"
client.id = "32"
clock.quantum-limit = "8192"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "48"
object.serial = "49"
node.max-latency = "16384/48000"
Formats:
pcm
Source #50
State: SUSPENDED
Name: alsa_input.pci-0000_05_00.6.analog-stereo
Description: Family 17h/19h HD Audio Controller Analog Stereo
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 9509 / 15% / -50.30 dB, front-right: 9509 / 15% / -50.30 dB
balance 0.00
Base Volume: 6554 / 10% / -60.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
object.path = "alsa:pcm:1:front:1:capture"
api.alsa.path = "front:1"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "capture"
audio.channels = "2"
audio.position = "FL,FR"
device.routes = "2"
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC295 Analog"
alsa.id = "ALC295 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xd15c0000 irq 81"
alsa.driver_name = "snd_hda_intel"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
card.profile.device = "0"
device.id = "45"
factory.name = "api.alsa.pcm.source"
priority.driver = "1945"
priority.session = "1945"
media.class = "Audio/Source"
node.nick = "HD-Audio Generic"
node.name = "alsa_input.pci-0000_05_00.6.analog-stereo"
device.description = "Family 17h/19h HD Audio Controller Analog Stereo"
device.icon_name = "audio-input-microphone-analog"
device.bus = "pci"
device.bus_path = "pci-0000:05:00.6"
node.pause-on-idle = "false"
factory.id = "18"
client.id = "32"
clock.quantum-limit = "8192"
node.driver = "true"
factory.mode = "split"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "49"
object.serial = "50"
Ports:
analog-input-internal-mic: Internal Microphone (type: Mic, priority: 8900, availability group: Legacy 1, availability unknown)
analog-input-headset-mic: Headset Microphone (type: Headset, priority: 8800, availability group: Legacy 2, availability unknown)
Active Port: analog-input-internal-mic
Formats:
pcm
Source #72
State: SUSPENDED
Name: NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo
Description: NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source
Driver: PipeWire
Sample Specification: float32le 1ch 48000Hz
Channel Map: mono
Owner Module: 536870913
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
node.name = "NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo"
media.class = "Audio/Source"
device.class = "filter"
audio.channels = "1"
audio.position = "MONO"
node.group = "ladspa-source-536870913"
pulse.module.id = "536870913"
device.description = "NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source"
node.link-group = "filter-chain-969-12"
node.virtual = "true"
media.name = "NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source output"
stream.is-live = "true"
node.autoconnect = "true"
node.want-driver = "true"
node.trigger = "true"
adapt.follower.node = ""
object.register = "false"
factory.id = "6"
audio.adapt.follower = ""
factory.mode = "split"
library.name = "audioconvert/libspa-audioconvert"
clock.quantum-limit = "8192"
client.id = "63"
object.id = "65"
object.serial = "72"
Formats:
pcmpactl list source-outputs:
Source Output #71
Driver: PipeWire
Owner Module: 536870913
Client: n/a
Source: 50
Sample Specification: float32le 1ch 48000Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32ne\"" format.rate = "48000" format.channels = "1" format.channel_map = "\"mono\""
Corked: yes
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Source Latency: 0 usec
Resample method: PipeWire
Properties:
node.target = "alsa_input.pci-0000_05_00.6.analog-stereo"
audio.channels = "1"
audio.position = "MONO"
node.passive = "true"
node.group = "ladspa-source-536870913"
pulse.module.id = "536870913"
device.description = "NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source"
node.link-group = "filter-chain-969-12"
node.virtual = "true"
node.name = "input.filter-chain-969-12"
media.name = "NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source input"
stream.is-live = "true"
node.autoconnect = "true"
node.want-driver = "true"
media.class = "Stream/Input/Audio"
adapt.follower.node = ""
object.register = "false"
factory.id = "6"
audio.adapt.follower = ""
factory.mode = "merge"
library.name = "audioconvert/libspa-audioconvert"
clock.quantum-limit = "8192"
client.id = "63"
object.id = "64"
object.serial = "71"
module-stream-restore.id = "source-output-by-media-name:NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source input"Offline
#10 2022-06-08 11:26:41
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 23,940
Re: External headphone mic not recognised.
The only thing you'd need to change here is the port of the mic everything else should still work the same
pactl set-source-port alsa_input.pci-0000_05_00.6.analog-stereo analog-input-headset-micwhat doesn't work when you do that?
Offline
#11 2022-06-11 18:27:50
- WeebSpirit
- Member
- Registered: 2021-10-27
- Posts: 91
Re: External headphone mic not recognised.
V1del wrote:
The only thing you'd need to change here is the port of the mic everything else should still work the same
pactl set-source-port alsa_input.pci-0000_05_00.6.analog-stereo analog-input-headset-micwhat doesn't work when you do that?
I am sorry for not replying. Tried it, nothing changed, rebooted, still no changes. I also tried the same command but removing an extra space before the device name, same thing. Here's all of the above commands after rebooting and entering the command again with noisetorch working on laptop microphone.
pactl list cards returns:
Card #45
Name: alsa_card.pci-0000_01_00.1
Driver: alsa
Owner Module: n/a
Properties:
device.enum.api = "udev"
device.api = "alsa"
media.class = "Audio/Device"
api.alsa.path = "hw:0"
api.alsa.card = "0"
api.alsa.card.name = "HDA NVidia"
api.alsa.card.longname = "HDA NVidia at 0xd1000000 irq 80"
device.plugged.usec = "2415545"
device.bus_path = "pci-0000:01:00.1"
device.sysfs.path = "/sys/devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0"
device.bus = "pci"
device.subsystem = "sound"
device.vendor.id = "4318"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "4346"
device.name = "alsa_card.pci-0000_01_00.1"
device.description = "HDA NVidia"
device.nick = "HDA NVidia"
device.icon_name = "audio-card-pci"
api.alsa.use-acp = "true"
api.acp.auto-profile = "false"
api.acp.auto-port = "false"
api.dbus.ReserveDevice1 = "Audio0"
factory.id = "14"
client.id = "31"
object.id = "44"
object.serial = "45"
object.path = "alsa:pcm:0"
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xd1000000 irq 80"
alsa.driver_name = "snd_hda_intel"
device.string = "0"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
pro-audio: Pro Audio (sinks: 4, sources: 0, priority: 1, available: yes)
Active Profile: off
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 1"
device.icon_name = "video-display"
card.profile.port = "0"
Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 2"
device.icon_name = "video-display"
card.profile.port = "1"
Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 3"
device.icon_name = "video-display"
card.profile.port = "2"
Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 4"
device.icon_name = "video-display"
card.profile.port = "3"
Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3
Card #46
Name: alsa_card.pci-0000_05_00.6
Driver: alsa
Owner Module: n/a
Properties:
device.enum.api = "udev"
device.api = "alsa"
media.class = "Audio/Device"
api.alsa.path = "hw:1"
api.alsa.card = "1"
api.alsa.card.name = "HD-Audio Generic"
api.alsa.card.longname = "HD-Audio Generic at 0xd15c0000 irq 81"
device.plugged.usec = "4284555"
device.bus_path = "pci-0000:05:00.6"
device.sysfs.path = "/sys/devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card1"
device.bus = "pci"
device.subsystem = "sound"
device.vendor.id = "4130"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "5603"
device.product.name = "Family 17h/19h HD Audio Controller"
device.name = "alsa_card.pci-0000_05_00.6"
device.description = "Family 17h/19h HD Audio Controller"
device.nick = "HD-Audio Generic"
device.icon_name = "audio-card-pci"
api.alsa.use-acp = "true"
api.acp.auto-profile = "false"
api.acp.auto-port = "false"
api.dbus.ReserveDevice1 = "Audio1"
factory.id = "14"
client.id = "31"
object.id = "45"
object.serial = "46"
object.path = "alsa:pcm:1"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xd15c0000 irq 81"
alsa.driver_name = "snd_hda_intel"
device.string = "1"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
pro-audio: Pro Audio (sinks: 1, sources: 1, priority: 1, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-internal-mic: Internal Microphone (type: Mic, priority: 8900, latency offset: 0 usec, availability group: Legacy 1, availability unknown)
Properties:
port.type = "mic"
port.availability-group = "Legacy 1"
device.icon_name = "audio-input-microphone"
card.profile.port = "0"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
analog-input-headset-mic: Headset Microphone (type: Headset, priority: 8800, latency offset: 0 usec, availability group: Legacy 2, availability unknown)
Properties:
port.type = "headset"
port.availability-group = "Legacy 2"
device.icon_name = "audio-input-microphone"
card.profile.port = "1"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-speaker: Speakers (type: Speaker, priority: 10000, latency offset: 0 usec, availability group: Legacy 3, not available)
Properties:
port.type = "speaker"
port.availability-group = "Legacy 3"
device.icon_name = "audio-speakers"
card.profile.port = "2"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 2, availability unknown)
Properties:
port.type = "headphones"
port.availability-group = "Legacy 2"
device.icon_name = "audio-headphones"
card.profile.port = "3"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereopactl list sources returns:
Source #49
State: SUSPENDED
Name: alsa_output.pci-0000_05_00.6.analog-stereo.monitor
Description: Monitor of Family 17h/19h HD Audio Controller Analog Stereo
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_05_00.6.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
object.path = "alsa:pcm:1:front:1:playback"
api.alsa.path = "front:1"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
device.routes = "2"
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "monitor"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC295 Analog"
alsa.id = "ALC295 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xd15c0000 irq 81"
alsa.driver_name = "snd_hda_intel"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
card.profile.device = "3"
device.id = "45"
factory.name = "api.alsa.pcm.sink"
priority.driver = "945"
priority.session = "945"
media.class = "Audio/Sink"
node.nick = "HD-Audio Generic"
node.name = "alsa_output.pci-0000_05_00.6.analog-stereo"
device.description = "Family 17h/19h HD Audio Controller Analog Stereo"
device.icon_name = "audio-card-analog"
device.bus = "pci"
device.bus_path = "pci-0000:05:00.6"
node.pause-on-idle = "false"
factory.id = "18"
client.id = "32"
clock.quantum-limit = "8192"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "48"
object.serial = "49"
node.max-latency = "16384/48000"
Formats:
pcm
Source #50
State: SUSPENDED
Name: alsa_input.pci-0000_05_00.6.analog-stereo
Description: Family 17h/19h HD Audio Controller Analog Stereo
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 12336 / 19% / -43.52 dB, front-right: 12336 / 19% / -43.52 dB
balance 0.00
Base Volume: 6554 / 10% / -60.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
object.path = "alsa:pcm:1:front:1:capture"
api.alsa.path = "front:1"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "capture"
audio.channels = "2"
audio.position = "FL,FR"
device.routes = "2"
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC295 Analog"
alsa.id = "ALC295 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xd15c0000 irq 81"
alsa.driver_name = "snd_hda_intel"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
card.profile.device = "0"
device.id = "45"
factory.name = "api.alsa.pcm.source"
priority.driver = "1945"
priority.session = "1945"
media.class = "Audio/Source"
node.nick = "HD-Audio Generic"
node.name = "alsa_input.pci-0000_05_00.6.analog-stereo"
device.description = "Family 17h/19h HD Audio Controller Analog Stereo"
device.icon_name = "audio-input-microphone-analog"
device.bus = "pci"
device.bus_path = "pci-0000:05:00.6"
node.pause-on-idle = "false"
factory.id = "18"
client.id = "32"
clock.quantum-limit = "8192"
node.driver = "true"
factory.mode = "split"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "49"
object.serial = "50"
Ports:
analog-input-internal-mic: Internal Microphone (type: Mic, priority: 8900, availability group: Legacy 1, availability unknown)
analog-input-headset-mic: Headset Microphone (type: Headset, priority: 8800, availability group: Legacy 2, availability unknown)
Active Port: analog-input-headset-mic
Formats:
pcm
Source #77
State: SUSPENDED
Name: NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo
Description: NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source
Driver: PipeWire
Sample Specification: float32le 1ch 48000Hz
Channel Map: mono
Owner Module: 536870913
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
node.name = "NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo"
media.class = "Audio/Source"
device.class = "filter"
audio.channels = "1"
audio.position = "MONO"
node.group = "ladspa-source-536870913"
pulse.module.id = "536870913"
device.description = "NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source"
node.link-group = "filter-chain-919-12"
node.virtual = "true"
media.name = "NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source output"
stream.is-live = "true"
node.autoconnect = "true"
node.want-driver = "true"
node.trigger = "true"
adapt.follower.node = ""
object.register = "false"
factory.id = "6"
audio.adapt.follower = ""
factory.mode = "split"
library.name = "audioconvert/libspa-audioconvert"
clock.quantum-limit = "8192"
client.id = "63"
object.id = "67"
object.serial = "77"
Formats:
pcmpactl list source-outputs returns:
Source Output #76
Driver: PipeWire
Owner Module: 536870913
Client: n/a
Source: 50
Sample Specification: float32le 1ch 48000Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32ne\"" format.rate = "48000" format.channels = "1" format.channel_map = "\"mono\""
Corked: yes
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Source Latency: 0 usec
Resample method: PipeWire
Properties:
node.target = "alsa_input.pci-0000_05_00.6.analog-stereo"
audio.channels = "1"
audio.position = "MONO"
node.passive = "true"
node.group = "ladspa-source-536870913"
pulse.module.id = "536870913"
device.description = "NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source"
node.link-group = "filter-chain-919-12"
node.virtual = "true"
node.name = "input.filter-chain-919-12"
media.name = "NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source input"
stream.is-live = "true"
node.autoconnect = "true"
node.want-driver = "true"
media.class = "Stream/Input/Audio"
adapt.follower.node = ""
object.register = "false"
factory.id = "6"
audio.adapt.follower = ""
factory.mode = "merge"
library.name = "audioconvert/libspa-audioconvert"
clock.quantum-limit = "8192"
client.id = "63"
object.id = "65"
object.serial = "76"
module-stream-restore.id = "source-output-by-media-name:NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source input"Offline