You are not logged in.

#1 2022-06-01 11:08:34

WeebSpirit
Member
Registered: 2021-10-27
Posts: 91

External headphone mic not recognised.

I'm using pipewire, pipewire-pulse is also installed. I have an Acer Nitro AN515-44 V1.04. It only has 1 mini jack port, i plugged my headphones (Hator hypergang evo), output works fine, but the microphone is not recognised, if testing with pavucontrol, it only shows Microphone, element web in chromium detects it as Family 17h/19h HD Audio Controller Analog Stereo. I did some googling and found this thread: https://forums.linuxmint.com/viewtopic.php?t=352073.
But

cat /proc/asound/card*/codec* | grep Codec

gives

Codec: Nvidia GPU 94 HDMI/DP
Codec: Realtek ALC295

I did add this into /etc/modprobe.d/alsa-base.conf, resulting in

options snd-hda-intel model=Nvidia GPU 94 HDMI/DP,Realtek ALC295

But the mic still doesn't get recognised.

Last edited by WeebSpirit (2022-06-02 16:15:19)


Discord? No way!

Offline

#2 2022-06-01 11:25:16

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 16,406

Re: External headphone mic not recognised.

That model list is invalid (and it doesn't make much sense to use the same exact model that is already autodetected, if that was working you wouldn't need to try to manipulate it), the available values are listed in https://www.kernel.org/doc/html/latest/ … odels.html judging by the thread you found what you want to test is.

# model=auto handles the nvidia hdmi with the standard codec, dell-headset-multi applies the relevant model override over your detected alc codec, other potential alternatives to dell-headset-multi: headset-mic, aspire-headset-mic
options snd-hda-intel model=auto,dell-headset-multi

Note you need to reboot for these to apply.

Last edited by V1del (2022-06-01 11:29:12)

Offline

#3 2022-06-01 11:41:28

WeebSpirit
Member
Registered: 2021-10-27
Posts: 91

Re: External headphone mic not recognised.

V1del wrote:

That model list is invalid (and it doesn't make much sense to use the same exact model that is already autodetected, if that was working you wouldn't need to try to manipulate it), the available values are listed in https://www.kernel.org/doc/html/latest/ … odels.html judging by the thread you found what you want to test is.

# model=auto handles the nvidia hdmi with the standard codec, dell-headset-multi applies the relevant model override over your detected alc codec, other potential alternatives to dell-headset-multi: headset-mic, aspire-headset-mic
options snd-hda-intel model=auto,dell-headset-multi

Note you need to reboot for these to apply.

Thank you, now it has Internal Microphone, Headset Microphone and Microphone. Headset microphone seems to be the right one. Thanks.


Discord? No way!

Offline

#4 2022-06-02 16:15:07

WeebSpirit
Member
Registered: 2021-10-27
Posts: 91

Re: External headphone mic not recognised.

I didn't do enough testing, reopening. I tried to use jitsi today, and it only detects the laptop mic + i also wanted to try noisetorch, and it also only detects the laptop mic. I tried setting headset-mic instead of dell-headset-multi, pavucontrol doesn't detect, then tried aspire-headset-mic, detected by pavucontrol, but not detected by noisetorch. I don't really know what else should i say


Discord? No way!

Offline

#5 2022-06-03 08:42:11

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 16,406

Re: External headphone mic not recognised.

If it works properly in pavucontrol/ALSA it will work properly for everything that hooks on pulseaudio including noisetorch. Create the logically working situation from a pulse perspective then post

arecord -lL
pacmd list-cards
pacmd list-sources
pacmd list-source-outputs

while trying to use noisetorch/currently not working application

Offline

#6 2022-06-03 09:07:16

WeebSpirit
Member
Registered: 2021-10-27
Posts: 91

Re: External headphone mic not recognised.

V1del wrote:

If it works properly in pavucontrol/ALSA it will work properly for everything that hooks on pulseaudio including noisetorch. Create the logically working situation from a pulse perspective then post

arecord -lL
pacmd list-cards
pacmd list-sources
pacmd list-source-outputs

while trying to use noisetorch/currently not working application

Maybe i forgot to mention, but I use pipewire with pipewire-pulse, pulseaudio conflicts with pipewire-pulse, so pacmd isn't found. Do i need to remove pipewire and replace it with pulseaudio?

arecord -lL results in:

null
    Discard all samples (playback) or generate zero samples (capture)
lavrate
    Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pipewire
    PipeWire Sound Server
pulse
    PulseAudio Sound Server
speex
    Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
default
    Default ALSA Output (currently PipeWire Media Server)
usbstream:CARD=NVidia
    HDA NVidia
    USB Stream Output
sysdefault:CARD=Generic
    HD-Audio Generic, ALC295 Analog
    Default Audio Device
front:CARD=Generic,DEV=0
    HD-Audio Generic, ALC295 Analog
    Front output / input
usbstream:CARD=Generic
    HD-Audio Generic
    USB Stream Output
**** List of CAPTURE Hardware Devices ****
card 1: Generic [HD-Audio Generic], device 0: ALC295 Analog [ALC295 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

Discord? No way!

Offline

#7 2022-06-07 08:05:49

WeebSpirit
Member
Registered: 2021-10-27
Posts: 91

Re: External headphone mic not recognised.

Okay, I made pulseaudio to work, removing pipewire-pulse. Here's the outputs:
arecord -lL returns:

null
    Discard all samples (playback) or generate zero samples (capture)
lavrate
    Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pipewire
    PipeWire Sound Server
pulse
    PulseAudio Sound Server
speex
    Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
default
    Default ALSA Output (currently PipeWire Media Server)
usbstream:CARD=NVidia
    HDA NVidia
    USB Stream Output
sysdefault:CARD=Generic
    HD-Audio Generic, ALC295 Analog
    Default Audio Device
front:CARD=Generic,DEV=0
    HD-Audio Generic, ALC295 Analog
    Front output / input
usbstream:CARD=Generic
    HD-Audio Generic
    USB Stream Output
**** List of CAPTURE Hardware Devices ****
card 1: Generic [HD-Audio Generic], device 0: ALC295 Analog [ALC295 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

pacmd list-cards returns:

2 card(s) available.
    index: 0
        name: <alsa_card.pci-0000_01_00.1>
        driver: <module-alsa-card.c>
        owner module: 6
        properties:
                alsa.card = "0"
                alsa.card_name = "HDA NVidia"
                alsa.long_card_name = "HDA NVidia at 0xd1000000 irq 97"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:01:00.1"
                sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0"
                device.bus = "pci"
                device.vendor.id = "10de"
                device.vendor.name = "NVIDIA Corporation"
                device.product.id = "10fa"
                device.string = "0"
                device.description = "HDA NVidia"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        profiles:
                output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
                output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
                output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
                output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
                output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
                output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
                output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
                output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
                output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
                output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: no)
                output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 600, available: no)
                output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 600, available: no)
                off: Off (priority 0, available: unknown)
        active profile: <off>
        ports:
                hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "video-display"
                hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "video-display"
                hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "video-display"
                hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "video-display"
    index: 1
        name: <alsa_card.pci-0000_05_00.6>
        driver: <module-alsa-card.c>
        owner module: 7
        properties:
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xd15c0000 irq 98"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:05:00.6"
                sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card1"
                device.bus = "pci"
                device.vendor.id = "1022"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                device.product.id = "15e3"
                device.product.name = "Family 17h/19h HD Audio Controller"
                device.string = "1"
                device.description = "Family 17h/19h HD Audio Controller"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        profiles:
                input:analog-stereo: Analog Stereo Input (priority 32833, available: unknown)
                output:analog-stereo: Analog Stereo Output (priority 39268, available: unknown)
                output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 39333, available: unknown)
                off: Off (priority 0, available: unknown)
        active profile: <output:analog-stereo+input:analog-stereo>
        sinks:
                alsa_output.pci-0000_05_00.6.analog-stereo/#0: Family 17h/19h HD Audio Controller Analog Stereo
        sources:
                alsa_output.pci-0000_05_00.6.analog-stereo.monitor/#0: Monitor of Family 17h/19h HD Audio Controller Analog Stereo
                alsa_input.pci-0000_05_00.6.analog-stereo/#1: Family 17h/19h HD Audio Controller Analog Stereo
        ports:
                analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "audio-input-microphone"
                analog-input-headset-mic: Headset Microphone (priority 8800, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "audio-input-microphone"
                analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "audio-speakers"
                analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "audio-headphones"

pacmd list-sources returns:

2 source(s) available.
    index: 0
        name: <alsa_output.pci-0000_05_00.6.analog-stereo.monitor>
        driver: <module-alsa-card.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: APPLICATION|IDLE
        priority: 1030
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.00 ms
        max rewind: 0 KiB
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 0
        configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
        monitor_of: 0
        card: 1 <alsa_card.pci-0000_05_00.6>
        module: 7
        properties:
                device.description = "Monitor of Family 17h/19h HD Audio Controller Analog Stereo"
                device.class = "monitor"
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xd15c0000 irq 98"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:05:00.6"
                sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card1"
                device.bus = "pci"
                device.vendor.id = "1022"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                device.product.id = "15e3"
                device.product.name = "Family 17h/19h HD Audio Controller"
                device.string = "1"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
  * index: 1
        name: <alsa_input.pci-0000_05_00.6.analog-stereo>
        driver: <module-alsa-card.c>
        flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: APPLICATION|IDLE
        priority: 9039
        volume: front-left: 9258 /  14% / -51.00 dB,   front-right: 9258 /  14% / -51.00 dB
                balance 0.00
        base volume: 6554 /  10% / -60.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.00 ms
        max rewind: 0 KiB
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 0
        configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
        card: 1 <alsa_card.pci-0000_05_00.6>
        module: 7
        properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC295 Analog"
                alsa.id = "ALC295 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xd15c0000 irq 98"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:05:00.6"
                sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card1"
                device.bus = "pci"
                device.vendor.id = "1022"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                device.product.id = "15e3"
                device.product.name = "Family 17h/19h HD Audio Controller"
                device.string = "front:1"
                device.buffering.buffer_size = "352768"
                device.buffering.fragment_size = "176384"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                device.description = "Family 17h/19h HD Audio Controller Analog Stereo"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        ports:
                analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "audio-input-microphone"
                analog-input-headset-mic: Headset Microphone (priority 8800, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "audio-input-microphone"
        active port: <analog-input-internal-mic>

pacmd list-source-outputs returns:

0 source output(s) available.

Discord? No way!

Offline

#8 2022-06-07 14:49:14

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 16,406

Re: External headphone mic not recognised.

You can also do that with pipewire, the thing of most interest here would be the source-outputs while actually trying to record something and having noisetorch or so active. If you want to switch back to pipewire you can change the other commands to

pactl list cards
pactl list sources
pactl list source-outputs

respectively.

Offline

#9 2022-06-08 11:16:24

WeebSpirit
Member
Registered: 2021-10-27
Posts: 91

Re: External headphone mic not recognised.

V1del wrote:

You can also do that with pipewire, the thing of most interest here would be the source-outputs while actually trying to record something and having noisetorch or so active. If you want to switch back to pipewire you can change the other commands to

pactl list cards
pactl list sources
pactl list source-outputs

respectively.

Okay, noisetorch is now working with the laptop built in mic, here's the outputs:
pactl list cards:

Card #45
        Name: alsa_card.pci-0000_01_00.1
        Driver: alsa
        Owner Module: n/a
        Properties:
                device.enum.api = "udev"
                device.api = "alsa"
                media.class = "Audio/Device"
                api.alsa.path = "hw:0"
                api.alsa.card = "0"
                api.alsa.card.name = "HDA NVidia"
                api.alsa.card.longname = "HDA NVidia at 0xd1000000 irq 80"
                device.plugged.usec = "2245388"
                device.bus_path = "pci-0000:01:00.1"
                device.sysfs.path = "/sys/devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0"
                device.bus = "pci"
                device.subsystem = "sound"
                device.vendor.id = "4318"
                device.vendor.name = "NVIDIA Corporation"
                device.product.id = "4346"
                device.name = "alsa_card.pci-0000_01_00.1"
                device.description = "HDA NVidia"
                device.nick = "HDA NVidia"
                device.icon_name = "audio-card-pci"
                api.alsa.use-acp = "true"
                api.acp.auto-profile = "false"
                api.acp.auto-port = "false"
                api.dbus.ReserveDevice1 = "Audio0"
                factory.id = "14"
                client.id = "31"
                object.id = "44"
                object.serial = "45"
                object.path = "alsa:pcm:0"
                alsa.card = "0"
                alsa.card_name = "HDA NVidia"
                alsa.long_card_name = "HDA NVidia at 0xd1000000 irq 80"
                alsa.driver_name = "snd_hda_intel"
                device.string = "0"
        Profiles:
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
                output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
                output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
                output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
                output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
                pro-audio: Pro Audio (sinks: 4, sources: 0, priority: 1, available: yes)
        Active Profile: off
        Ports:
                hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, not available)
                        Properties:
                                port.type = "hdmi"
                                port.availability-group = "Legacy 1"
                                device.icon_name = "video-display"
                                card.profile.port = "0"
                        Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
                hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, not available)
                        Properties:
                                port.type = "hdmi"
                                port.availability-group = "Legacy 2"
                                device.icon_name = "video-display"
                                card.profile.port = "1"
                        Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
                hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
                        Properties:
                                port.type = "hdmi"
                                port.availability-group = "Legacy 3"
                                device.icon_name = "video-display"
                                card.profile.port = "2"
                        Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
                hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
                        Properties:
                                port.type = "hdmi"
                                port.availability-group = "Legacy 4"
                                device.icon_name = "video-display"
                                card.profile.port = "3"
                        Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3

Card #46
        Name: alsa_card.pci-0000_05_00.6
        Driver: alsa
        Owner Module: n/a
        Properties:
                device.enum.api = "udev"
                device.api = "alsa"
                media.class = "Audio/Device"
                api.alsa.path = "hw:1"
                api.alsa.card = "1"
                api.alsa.card.name = "HD-Audio Generic"
                api.alsa.card.longname = "HD-Audio Generic at 0xd15c0000 irq 81"
                device.plugged.usec = "4257943"
                device.bus_path = "pci-0000:05:00.6"
                device.sysfs.path = "/sys/devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card1"
                device.bus = "pci"
                device.subsystem = "sound"
                device.vendor.id = "4130"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                device.product.id = "5603"
                device.product.name = "Family 17h/19h HD Audio Controller"
                device.name = "alsa_card.pci-0000_05_00.6"
                device.description = "Family 17h/19h HD Audio Controller"
                device.nick = "HD-Audio Generic"
                device.icon_name = "audio-card-pci"
                api.alsa.use-acp = "true"
                api.acp.auto-profile = "false"
                api.acp.auto-port = "false"
                api.dbus.ReserveDevice1 = "Audio1"
                factory.id = "14"
                client.id = "31"
                object.id = "45"
                object.serial = "46"
                object.path = "alsa:pcm:1"
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xd15c0000 irq 81"
                alsa.driver_name = "snd_hda_intel"
                device.string = "1"
        Profiles:
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
                output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
                output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
                input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
                pro-audio: Pro Audio (sinks: 1, sources: 1, priority: 1, available: yes)
        Active Profile: output:analog-stereo+input:analog-stereo
        Ports:
                analog-input-internal-mic: Internal Microphone (type: Mic, priority: 8900, latency offset: 0 usec, availability group: Legacy 1, availability unknown)
                        Properties:
                                port.type = "mic"
                                port.availability-group = "Legacy 1"
                                device.icon_name = "audio-input-microphone"
                                card.profile.port = "0"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
                analog-input-headset-mic: Headset Microphone (type: Headset, priority: 8800, latency offset: 0 usec, availability group: Legacy 2, availability unknown)
                        Properties:
                                port.type = "headset"
                                port.availability-group = "Legacy 2"
                                device.icon_name = "audio-input-microphone"
                                card.profile.port = "1"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
                analog-output-speaker: Speakers (type: Speaker, priority: 10000, latency offset: 0 usec, availability group: Legacy 3, not available)
                        Properties:
                                port.type = "speaker"
                                port.availability-group = "Legacy 3"
                                device.icon_name = "audio-speakers"
                                card.profile.port = "2"
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
                analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 2, availability unknown)
                        Properties:
                                port.type = "headphones"
                                port.availability-group = "Legacy 2"
                                device.icon_name = "audio-headphones"
                                card.profile.port = "3"
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo

pactl list sources:

Source #49
        State: SUSPENDED
        Name: alsa_output.pci-0000_05_00.6.analog-stereo.monitor
        Description: Monitor of Family 17h/19h HD Audio Controller Analog Stereo
        Driver: PipeWire
        Sample Specification: s32le 2ch 48000Hz
        Channel Map: front-left,front-right
        Owner Module: 4294967295
        Mute: no
        Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor of Sink: alsa_output.pci-0000_05_00.6.analog-stereo
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE DECIBEL_VOLUME LATENCY
        Properties:
                object.path = "alsa:pcm:1:front:1:playback"
                api.alsa.path = "front:1"
                api.alsa.pcm.card = "1"
                api.alsa.pcm.stream = "playback"
                audio.channels = "2"
                audio.position = "FL,FR"
                device.routes = "2"
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "monitor"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC295 Analog"
                alsa.id = "ALC295 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xd15c0000 irq 81"
                alsa.driver_name = "snd_hda_intel"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                card.profile.device = "3"
                device.id = "45"
                factory.name = "api.alsa.pcm.sink"
                priority.driver = "945"
                priority.session = "945"
                media.class = "Audio/Sink"
                node.nick = "HD-Audio Generic"
                node.name = "alsa_output.pci-0000_05_00.6.analog-stereo"
                device.description = "Family 17h/19h HD Audio Controller Analog Stereo"
                device.icon_name = "audio-card-analog"
                device.bus = "pci"
                device.bus_path = "pci-0000:05:00.6"
                node.pause-on-idle = "false"
                factory.id = "18"
                client.id = "32"
                clock.quantum-limit = "8192"
                node.driver = "true"
                factory.mode = "merge"
                audio.adapt.follower = ""
                library.name = "audioconvert/libspa-audioconvert"
                object.id = "48"
                object.serial = "49"
                node.max-latency = "16384/48000"
        Formats:
                pcm

Source #50
        State: SUSPENDED
        Name: alsa_input.pci-0000_05_00.6.analog-stereo
        Description: Family 17h/19h HD Audio Controller Analog Stereo
        Driver: PipeWire
        Sample Specification: s32le 2ch 48000Hz
        Channel Map: front-left,front-right
        Owner Module: 4294967295
        Mute: no
        Volume: front-left: 9509 /  15% / -50.30 dB,   front-right: 9509 /  15% / -50.30 dB
                balance 0.00
        Base Volume: 6554 /  10% / -60.00 dB
        Monitor of Sink: n/a
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
        Properties:
                object.path = "alsa:pcm:1:front:1:capture"
                api.alsa.path = "front:1"
                api.alsa.pcm.card = "1"
                api.alsa.pcm.stream = "capture"
                audio.channels = "2"
                audio.position = "FL,FR"
                device.routes = "2"
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC295 Analog"
                alsa.id = "ALC295 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xd15c0000 irq 81"
                alsa.driver_name = "snd_hda_intel"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                card.profile.device = "0"
                device.id = "45"
                factory.name = "api.alsa.pcm.source"
                priority.driver = "1945"
                priority.session = "1945"
                media.class = "Audio/Source"
                node.nick = "HD-Audio Generic"
                node.name = "alsa_input.pci-0000_05_00.6.analog-stereo"
                device.description = "Family 17h/19h HD Audio Controller Analog Stereo"
                device.icon_name = "audio-input-microphone-analog"
                device.bus = "pci"
                device.bus_path = "pci-0000:05:00.6"
                node.pause-on-idle = "false"
                factory.id = "18"
                client.id = "32"
                clock.quantum-limit = "8192"
                node.driver = "true"
                factory.mode = "split"
                audio.adapt.follower = ""
                library.name = "audioconvert/libspa-audioconvert"
                object.id = "49"
                object.serial = "50"
        Ports:
                analog-input-internal-mic: Internal Microphone (type: Mic, priority: 8900, availability group: Legacy 1, availability unknown)
                analog-input-headset-mic: Headset Microphone (type: Headset, priority: 8800, availability group: Legacy 2, availability unknown)
        Active Port: analog-input-internal-mic
        Formats:
                pcm

Source #72
        State: SUSPENDED
        Name: NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo
        Description: NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source
        Driver: PipeWire
        Sample Specification: float32le 1ch 48000Hz
        Channel Map: mono
        Owner Module: 536870913
        Mute: no
        Volume: mono: 65536 / 100% / 0.00 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor of Sink: n/a
        Latency: 0 usec, configured 0 usec
        Flags: DECIBEL_VOLUME LATENCY
        Properties:
                node.name = "NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo"
                media.class = "Audio/Source"
                device.class = "filter"
                audio.channels = "1"
                audio.position = "MONO"
                node.group = "ladspa-source-536870913"
                pulse.module.id = "536870913"
                device.description = "NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source"
                node.link-group = "filter-chain-969-12"
                node.virtual = "true"
                media.name = "NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source output"
                stream.is-live = "true"
                node.autoconnect = "true"
                node.want-driver = "true"
                node.trigger = "true"
                adapt.follower.node = ""
                object.register = "false"
                factory.id = "6"
                audio.adapt.follower = ""
                factory.mode = "split"
                library.name = "audioconvert/libspa-audioconvert"
                clock.quantum-limit = "8192"
                client.id = "63"
                object.id = "65"
                object.serial = "72"
        Formats:
                pcm

pactl list source-outputs:

Source Output #71
        Driver: PipeWire
        Owner Module: 536870913
        Client: n/a
        Source: 50
        Sample Specification: float32le 1ch 48000Hz
        Channel Map: mono
        Format: pcm, format.sample_format = "\"float32ne\""  format.rate = "48000"  format.channels = "1"  format.channel_map = "\"mono\""
        Corked: yes
        Mute: no
        Volume: mono: 65536 / 100% / 0.00 dB
                balance 0.00
        Buffer Latency: 0 usec
        Source Latency: 0 usec
        Resample method: PipeWire
        Properties:
                node.target = "alsa_input.pci-0000_05_00.6.analog-stereo"
                audio.channels = "1"
                audio.position = "MONO"
                node.passive = "true"
                node.group = "ladspa-source-536870913"
                pulse.module.id = "536870913"
                device.description = "NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source"
                node.link-group = "filter-chain-969-12"
                node.virtual = "true"
                node.name = "input.filter-chain-969-12"
                media.name = "NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source input"
                stream.is-live = "true"
                node.autoconnect = "true"
                node.want-driver = "true"
                media.class = "Stream/Input/Audio"
                adapt.follower.node = ""
                object.register = "false"
                factory.id = "6"
                audio.adapt.follower = ""
                factory.mode = "merge"
                library.name = "audioconvert/libspa-audioconvert"
                clock.quantum-limit = "8192"
                client.id = "63"
                object.id = "64"
                object.serial = "71"
                module-stream-restore.id = "source-output-by-media-name:NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source input"

Discord? No way!

Offline

#10 2022-06-08 11:26:41

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 16,406

Re: External headphone mic not recognised.

The only thing you'd need to change here is the port of the mic everything else should still work the same

pactl set-source-port alsa_input.pci-0000_05_00.6.analog-stereo  analog-input-headset-mic

what doesn't work when you do that?

Offline

#11 2022-06-11 18:27:50

WeebSpirit
Member
Registered: 2021-10-27
Posts: 91

Re: External headphone mic not recognised.

V1del wrote:

The only thing you'd need to change here is the port of the mic everything else should still work the same

pactl set-source-port alsa_input.pci-0000_05_00.6.analog-stereo  analog-input-headset-mic

what doesn't work when you do that?

I am sorry for not replying. Tried it, nothing changed, rebooted, still no changes. I also tried the same command but removing an extra space before the device name, same thing. Here's all of the above commands after rebooting and entering the command again with noisetorch working on laptop microphone.
pactl list cards returns:

Card #45
        Name: alsa_card.pci-0000_01_00.1
        Driver: alsa
        Owner Module: n/a
        Properties:
                device.enum.api = "udev"
                device.api = "alsa"
                media.class = "Audio/Device"
                api.alsa.path = "hw:0"
                api.alsa.card = "0"
                api.alsa.card.name = "HDA NVidia"
                api.alsa.card.longname = "HDA NVidia at 0xd1000000 irq 80"
                device.plugged.usec = "2415545"
                device.bus_path = "pci-0000:01:00.1"
                device.sysfs.path = "/sys/devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0"
                device.bus = "pci"
                device.subsystem = "sound"
                device.vendor.id = "4318"
                device.vendor.name = "NVIDIA Corporation"
                device.product.id = "4346"
                device.name = "alsa_card.pci-0000_01_00.1"
                device.description = "HDA NVidia"
                device.nick = "HDA NVidia"
                device.icon_name = "audio-card-pci"
                api.alsa.use-acp = "true"
                api.acp.auto-profile = "false"
                api.acp.auto-port = "false"
                api.dbus.ReserveDevice1 = "Audio0"
                factory.id = "14"
                client.id = "31"
                object.id = "44"
                object.serial = "45"
                object.path = "alsa:pcm:0"
                alsa.card = "0"
                alsa.card_name = "HDA NVidia"
                alsa.long_card_name = "HDA NVidia at 0xd1000000 irq 80"
                alsa.driver_name = "snd_hda_intel"
                device.string = "0"
        Profiles:
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
                output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
                output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
                output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
                output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
                pro-audio: Pro Audio (sinks: 4, sources: 0, priority: 1, available: yes)
        Active Profile: off
        Ports:
                hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, not available)
                        Properties:
                                port.type = "hdmi"
                                port.availability-group = "Legacy 1"
                                device.icon_name = "video-display"
                                card.profile.port = "0"
                        Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
                hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, not available)
                        Properties:
                                port.type = "hdmi"
                                port.availability-group = "Legacy 2"
                                device.icon_name = "video-display"
                                card.profile.port = "1"
                        Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
                hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
                        Properties:
                                port.type = "hdmi"
                                port.availability-group = "Legacy 3"
                                device.icon_name = "video-display"
                                card.profile.port = "2"
                        Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
                hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
                        Properties:
                                port.type = "hdmi"
                                port.availability-group = "Legacy 4"
                                device.icon_name = "video-display"
                                card.profile.port = "3"
                        Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3

Card #46
        Name: alsa_card.pci-0000_05_00.6
        Driver: alsa
        Owner Module: n/a
        Properties:
                device.enum.api = "udev"
                device.api = "alsa"
                media.class = "Audio/Device"
                api.alsa.path = "hw:1"
                api.alsa.card = "1"
                api.alsa.card.name = "HD-Audio Generic"
                api.alsa.card.longname = "HD-Audio Generic at 0xd15c0000 irq 81"
                device.plugged.usec = "4284555"
                device.bus_path = "pci-0000:05:00.6"
                device.sysfs.path = "/sys/devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card1"
                device.bus = "pci"
                device.subsystem = "sound"
                device.vendor.id = "4130"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                device.product.id = "5603"
                device.product.name = "Family 17h/19h HD Audio Controller"
                device.name = "alsa_card.pci-0000_05_00.6"
                device.description = "Family 17h/19h HD Audio Controller"
                device.nick = "HD-Audio Generic"
                device.icon_name = "audio-card-pci"
                api.alsa.use-acp = "true"
                api.acp.auto-profile = "false"
                api.acp.auto-port = "false"
                api.dbus.ReserveDevice1 = "Audio1"
                factory.id = "14"
                client.id = "31"
                object.id = "45"
                object.serial = "46"
                object.path = "alsa:pcm:1"
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xd15c0000 irq 81"
                alsa.driver_name = "snd_hda_intel"
                device.string = "1"
        Profiles:
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
                output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
                output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
                input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
                pro-audio: Pro Audio (sinks: 1, sources: 1, priority: 1, available: yes)
        Active Profile: output:analog-stereo+input:analog-stereo
        Ports:
                analog-input-internal-mic: Internal Microphone (type: Mic, priority: 8900, latency offset: 0 usec, availability group: Legacy 1, availability unknown)
                        Properties:
                                port.type = "mic"
                                port.availability-group = "Legacy 1"
                                device.icon_name = "audio-input-microphone"
                                card.profile.port = "0"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
                analog-input-headset-mic: Headset Microphone (type: Headset, priority: 8800, latency offset: 0 usec, availability group: Legacy 2, availability unknown)
                        Properties:
                                port.type = "headset"
                                port.availability-group = "Legacy 2"
                                device.icon_name = "audio-input-microphone"
                                card.profile.port = "1"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
                analog-output-speaker: Speakers (type: Speaker, priority: 10000, latency offset: 0 usec, availability group: Legacy 3, not available)
                        Properties:
                                port.type = "speaker"
                                port.availability-group = "Legacy 3"
                                device.icon_name = "audio-speakers"
                                card.profile.port = "2"
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
                analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 2, availability unknown)
                        Properties:
                                port.type = "headphones"
                                port.availability-group = "Legacy 2"
                                device.icon_name = "audio-headphones"
                                card.profile.port = "3"
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo

pactl list sources returns:

Source #49
        State: SUSPENDED
        Name: alsa_output.pci-0000_05_00.6.analog-stereo.monitor
        Description: Monitor of Family 17h/19h HD Audio Controller Analog Stereo
        Driver: PipeWire
        Sample Specification: s32le 2ch 48000Hz
        Channel Map: front-left,front-right
        Owner Module: 4294967295
        Mute: no
        Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor of Sink: alsa_output.pci-0000_05_00.6.analog-stereo
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE DECIBEL_VOLUME LATENCY
        Properties:
                object.path = "alsa:pcm:1:front:1:playback"
                api.alsa.path = "front:1"
                api.alsa.pcm.card = "1"
                api.alsa.pcm.stream = "playback"
                audio.channels = "2"
                audio.position = "FL,FR"
                device.routes = "2"
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "monitor"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC295 Analog"
                alsa.id = "ALC295 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xd15c0000 irq 81"
                alsa.driver_name = "snd_hda_intel"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                card.profile.device = "3"
                device.id = "45"
                factory.name = "api.alsa.pcm.sink"
                priority.driver = "945"
                priority.session = "945"
                media.class = "Audio/Sink"
                node.nick = "HD-Audio Generic"
                node.name = "alsa_output.pci-0000_05_00.6.analog-stereo"
                device.description = "Family 17h/19h HD Audio Controller Analog Stereo"
                device.icon_name = "audio-card-analog"
                device.bus = "pci"
                device.bus_path = "pci-0000:05:00.6"
                node.pause-on-idle = "false"
                factory.id = "18"
                client.id = "32"
                clock.quantum-limit = "8192"
                node.driver = "true"
                factory.mode = "merge"
                audio.adapt.follower = ""
                library.name = "audioconvert/libspa-audioconvert"
                object.id = "48"
                object.serial = "49"
                node.max-latency = "16384/48000"
        Formats:
                pcm

Source #50
        State: SUSPENDED
        Name: alsa_input.pci-0000_05_00.6.analog-stereo
        Description: Family 17h/19h HD Audio Controller Analog Stereo
        Driver: PipeWire
        Sample Specification: s32le 2ch 48000Hz
        Channel Map: front-left,front-right
        Owner Module: 4294967295
        Mute: no
        Volume: front-left: 12336 /  19% / -43.52 dB,   front-right: 12336 /  19% / -43.52 dB
                balance 0.00
        Base Volume: 6554 /  10% / -60.00 dB
        Monitor of Sink: n/a
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
        Properties:
                object.path = "alsa:pcm:1:front:1:capture"
                api.alsa.path = "front:1"
                api.alsa.pcm.card = "1"
                api.alsa.pcm.stream = "capture"
                audio.channels = "2"
                audio.position = "FL,FR"
                device.routes = "2"
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC295 Analog"
                alsa.id = "ALC295 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xd15c0000 irq 81"
                alsa.driver_name = "snd_hda_intel"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                card.profile.device = "0"
                device.id = "45"
                factory.name = "api.alsa.pcm.source"
                priority.driver = "1945"
                priority.session = "1945"
                media.class = "Audio/Source"
                node.nick = "HD-Audio Generic"
                node.name = "alsa_input.pci-0000_05_00.6.analog-stereo"
                device.description = "Family 17h/19h HD Audio Controller Analog Stereo"
                device.icon_name = "audio-input-microphone-analog"
                device.bus = "pci"
                device.bus_path = "pci-0000:05:00.6"
                node.pause-on-idle = "false"
                factory.id = "18"
                client.id = "32"
                clock.quantum-limit = "8192"
                node.driver = "true"
                factory.mode = "split"
                audio.adapt.follower = ""
                library.name = "audioconvert/libspa-audioconvert"
                object.id = "49"
                object.serial = "50"
        Ports:
                analog-input-internal-mic: Internal Microphone (type: Mic, priority: 8900, availability group: Legacy 1, availability unknown)
                analog-input-headset-mic: Headset Microphone (type: Headset, priority: 8800, availability group: Legacy 2, availability unknown)
        Active Port: analog-input-headset-mic
        Formats:
                pcm

Source #77
        State: SUSPENDED
        Name: NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo
        Description: NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source
        Driver: PipeWire
        Sample Specification: float32le 1ch 48000Hz
        Channel Map: mono
        Owner Module: 536870913
        Mute: no
        Volume: mono: 65536 / 100% / 0.00 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor of Sink: n/a
        Latency: 0 usec, configured 0 usec
        Flags: DECIBEL_VOLUME LATENCY
        Properties:
                node.name = "NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo"
                media.class = "Audio/Source"
                device.class = "filter"
                audio.channels = "1"
                audio.position = "MONO"
                node.group = "ladspa-source-536870913"
                pulse.module.id = "536870913"
                device.description = "NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source"
                node.link-group = "filter-chain-919-12"
                node.virtual = "true"
                media.name = "NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source output"
                stream.is-live = "true"
                node.autoconnect = "true"
                node.want-driver = "true"
                node.trigger = "true"
                adapt.follower.node = ""
                object.register = "false"
                factory.id = "6"
                audio.adapt.follower = ""
                factory.mode = "split"
                library.name = "audioconvert/libspa-audioconvert"
                clock.quantum-limit = "8192"
                client.id = "63"
                object.id = "67"
                object.serial = "77"
        Formats:
                pcm

pactl list source-outputs returns:

Source Output #76
        Driver: PipeWire
        Owner Module: 536870913
        Client: n/a
        Source: 50
        Sample Specification: float32le 1ch 48000Hz
        Channel Map: mono
        Format: pcm, format.sample_format = "\"float32ne\""  format.rate = "48000"  format.channels = "1"  format.channel_map = "\"mono\""
        Corked: yes
        Mute: no
        Volume: mono: 65536 / 100% / 0.00 dB
                balance 0.00
        Buffer Latency: 0 usec
        Source Latency: 0 usec
        Resample method: PipeWire
        Properties:
                node.target = "alsa_input.pci-0000_05_00.6.analog-stereo"
                audio.channels = "1"
                audio.position = "MONO"
                node.passive = "true"
                node.group = "ladspa-source-536870913"
                pulse.module.id = "536870913"
                device.description = "NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source"
                node.link-group = "filter-chain-919-12"
                node.virtual = "true"
                node.name = "input.filter-chain-919-12"
                media.name = "NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source input"
                stream.is-live = "true"
                node.autoconnect = "true"
                node.want-driver = "true"
                media.class = "Stream/Input/Audio"
                adapt.follower.node = ""
                object.register = "false"
                factory.id = "6"
                audio.adapt.follower = ""
                factory.mode = "merge"
                library.name = "audioconvert/libspa-audioconvert"
                clock.quantum-limit = "8192"
                client.id = "63"
                object.id = "65"
                object.serial = "76"
                module-stream-restore.id = "source-output-by-media-name:NoiseTorch Microphone for Family 17h/19h HD Audio Controller Analog Stereo Source input"

Discord? No way!

Offline

Board footer

Powered by FluxBB