You are not logged in.

#1 2022-11-13 16:40:59

gtf21
Member
Registered: 2020-06-28
Posts: 86
Website

[SOLVED] X11 session (i3) suddenly tinted brown

I just ran a full system upgrade, my tty looks fine colour-wise, but once I startx, everything is tinted brown. I've checked and redshift isn't running and I don't have any weird settings I'd expect to do this. I also looked at the list of things which were in the pacman log and nothing stood out to me, except perhaps mesa -- I don't know why I have amdvlk installed since this is an intel machine -- but it's a bit baffling. Exiting X11 returns the colours (in the tty) to normal so it's not a problem with the monitor itself, just X11.

Here's the pacman log for the upgrade in case there are any obvious packages

[2022-11-13T16:00:58+0000] [PACMAN] Running 'pacman -S -y -u --config /etc/pacman.conf --'
[2022-11-13T16:00:58+0000] [PACMAN] synchronizing package lists
[2022-11-13T16:01:01+0000] [PACMAN] starting full system upgrade
[2022-11-13T16:03:58+0000] [ALPM] running '60-mkinitcpio-remove.hook'...
[2022-11-13T16:03:58+0000] [ALPM] running '71-dkms-remove.hook'...
[2022-11-13T16:03:59+0000] [ALPM-SCRIPTLET] ==> dkms remove --no-depmod vboxhost/7.0.2_OSE -k 6.0.7-arch1-1
[2022-11-13T16:03:59+0000] [ALPM-SCRIPTLET] ==> depmod 6.0.7-arch1-1
[2022-11-13T16:04:00+0000] [ALPM] transaction started
[2022-11-13T16:04:00+0000] [ALPM] upgraded iana-etc (20221025-1 -> 20221107-1)
[2022-11-13T16:04:00+0000] [ALPM] upgraded imath (3.1.5-3 -> 3.1.6-1)
[2022-11-13T16:04:00+0000] [ALPM] upgraded alembic (1.8.3-3 -> 1.8.4-1)
[2022-11-13T16:04:00+0000] [ALPM] upgraded amdvlk (2022.Q4.1-2 -> 2022.Q4.2-1)
[2022-11-13T16:04:00+0000] [ALPM] upgraded apparmor (3.1.1-1 -> 3.1.2-1)
[2022-11-13T16:04:00+0000] [ALPM] upgraded libunistring (1.0-1 -> 1.1-2)
[2022-11-13T16:04:00+0000] [ALPM] upgraded gettext (0.21.1-1 -> 0.21.1-2)
[2022-11-13T16:04:00+0000] [ALPM] upgraded libidn2 (2.3.4-1 -> 2.3.4-3)
[2022-11-13T16:04:00+0000] [ALPM] upgraded libpsl (0.21.1-1 -> 0.21.1-3)
[2022-11-13T16:04:00+0000] [ALPM] upgraded systemd-libs (251.7-4 -> 252.1-1)
[2022-11-13T16:04:00+0000] [ALPM] upgraded ca-certificates-mozilla (3.84-1 -> 3.85-1)
[2022-11-13T16:04:00+0000] [ALPM] upgraded gnutls (3.7.8-1 -> 3.7.8-4)
[2022-11-13T16:04:00+0000] [ALPM] upgraded archlinux-keyring (20220927-1 -> 20221110-1)
[2022-11-13T16:04:01+0000] [ALPM-SCRIPTLET] ==> Appending keys from archlinux.gpg...
[2022-11-13T16:04:02+0000] [ALPM-SCRIPTLET] ==> Locally signing trusted keys in keyring...
[2022-11-13T16:04:02+0000] [ALPM-SCRIPTLET]   -> Locally signed 1 keys.
[2022-11-13T16:04:02+0000] [ALPM-SCRIPTLET] ==> Importing owner trust values...
[2022-11-13T16:04:02+0000] [ALPM-SCRIPTLET] gpg: inserting ownertrust of 4
[2022-11-13T16:04:02+0000] [ALPM-SCRIPTLET] ==> Updating trust database...
[2022-11-13T16:04:02+0000] [ALPM-SCRIPTLET] gpg: marginals needed: 3  completes needed: 1  trust model: pgp
[2022-11-13T16:04:02+0000] [ALPM-SCRIPTLET] gpg: depth: 0  valid:   1  signed:   7  trust: 0-, 0q, 0n, 0m, 0f, 1u
[2022-11-13T16:04:02+0000] [ALPM-SCRIPTLET] gpg: depth: 1  valid:   7  signed:  95  trust: 0-, 0q, 0n, 7m, 0f, 0u
[2022-11-13T16:04:02+0000] [ALPM-SCRIPTLET] gpg: depth: 2  valid:  74  signed:  29  trust: 74-, 0q, 0n, 0m, 0f, 0u
[2022-11-13T16:04:02+0000] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2022-11-16
[2022-11-13T16:04:02+0000] [ALPM-SCRIPTLET] ==> Updating trust database...
[2022-11-13T16:04:02+0000] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2022-11-16
[2022-11-13T16:04:03+0000] [ALPM] upgraded asio (1.20.0-1 -> 1.24.0-1)
[2022-11-13T16:04:03+0000] [ALPM] upgraded blas (3.10.1-1 -> 3.11-1)
[2022-11-13T16:04:03+0000] [ALPM] upgraded bluez (5.65-3 -> 5.66-1)
[2022-11-13T16:04:03+0000] [ALPM] upgraded bluez-libs (5.65-3 -> 5.66-1)
[2022-11-13T16:04:03+0000] [ALPM] upgraded device-mapper (2.03.16-2 -> 2.03.17-1)
[2022-11-13T16:04:03+0000] [ALPM] upgraded popt (1.18-3 -> 1.19-1)
[2022-11-13T16:04:03+0000] [ALPM] upgraded cryptsetup (2.5.0-3 -> 2.5.0-4)
[2022-11-13T16:04:03+0000] [ALPM] upgraded hwdata (0.363-1 -> 0.364-1)
[2022-11-13T16:04:03+0000] [ALPM] upgraded shadow (4.11.1-3 -> 4.12.3-2)
[2022-11-13T16:04:03+0000] [ALPM] upgraded systemd (251.7-4 -> 252.1-1)
[2022-11-13T16:04:03+0000] [ALPM] upgraded bluez-utils (5.65-3 -> 5.66-1)
[2022-11-13T16:04:03+0000] [ALPM] upgraded btrfs-progs (6.0-1 -> 6.0.1-1)
[2022-11-13T16:04:03+0000] [ALPM] upgraded bubblewrap (0.6.2-1 -> 0.7.0-1)
[2022-11-13T16:04:03+0000] [ALPM] upgraded cadaver (0.23.3-12 -> 0.24-1)
[2022-11-13T16:04:03+0000] [ALPM] upgraded cblas (3.10.1-1 -> 3.11-1)
[2022-11-13T16:04:03+0000] [ALPM] upgraded nss (3.84-1 -> 3.85-1)
[2022-11-13T16:04:03+0000] [ALPM] upgraded libx11 (1.8.1-3 -> 1.8.2-1)
[2022-11-13T16:04:03+0000] [ALPM] upgraded xdg-utils (1.1.3+21+g1a58bc2-2 -> 1.1.3+25+g8ae0263-1)
[2022-11-13T16:04:03+0000] [ALPM] upgraded mesa (22.2.2-1 -> 22.2.3-1)
[2022-11-13T16:04:03+0000] [ALPM] upgraded chromium (107.0.5304.87-1 -> 107.0.5304.110-1)
[2022-11-13T16:04:03+0000] [ALPM] upgraded pugixml (1.12.1-1 -> 1.13-1)
[2022-11-13T16:04:03+0000] [ALPM] upgraded libavif (0.10.1-2 -> 0.11.1-1)
[2022-11-13T16:04:03+0000] [ALPM] upgraded lapack (3.10.1-1 -> 3.11-1)
[2022-11-13T16:04:03+0000] [ALPM] upgraded gd (2.3.3-4 -> 2.3.3-5)
[2022-11-13T16:04:04+0000] [ALPM] upgraded darktable (2:4.0.1-2 -> 2:4.0.1-3)
[2022-11-13T16:04:04+0000] [ALPM] upgraded fwupd (1.8.6-1 -> 1.8.7-2)
[2022-11-13T16:04:04+0000] [ALPM] upgraded libspiro (1:20220722-1 -> 1:20221101-1)
[2022-11-13T16:04:04+0000] [ALPM] upgraded suitesparse (5.13.0-1 -> 6.0.0-3)
[2022-11-13T16:04:04+0000] [ALPM] upgraded gegl (0.4.38-1 -> 0.4.38-2)
[2022-11-13T16:04:04+0000] [ALPM] upgraded gptfdisk (1.0.9-1 -> 1.0.9-2)
[2022-11-13T16:04:04+0000] [ALPM] upgraded qt5-base (5.15.7+kde+r169-1 -> 5.15.7+kde+r173-1)
[2022-11-13T16:04:04+0000] [ALPM] upgraded qt5-declarative (5.15.7+kde+r20-1 -> 5.15.7+kde+r21-1)
[2022-11-13T16:04:04+0000] [ALPM] upgraded grantlee (5.3.0-1 -> 5.3.1-1)
[2022-11-13T16:04:04+0000] [ALPM] upgraded graphviz (7.0.0-1 -> 7.0.1-2)
[2022-11-13T16:04:04+0000] [ALPM] upgraded gssdp (1.6.0-1 -> 1.6.1-1)
[2022-11-13T16:04:04+0000] [ALPM] upgraded texinfo (6.8-2 -> 7.0-1)
[2022-11-13T16:04:04+0000] [ALPM] upgraded guile (2.2.7-2 -> 3.0.8-2)
[2022-11-13T16:04:04+0000] [ALPM] upgraded gupnp (1:1.6.0-1 -> 1:1.6.1-1)
[2022-11-13T16:04:04+0000] [ALPM] upgraded intel-ucode (20220809-1 -> 20221108-1)
[2022-11-13T16:04:04+0000] [ALPM] upgraded kitty-terminfo (0.26.4-2 -> 0.26.5-1)
[2022-11-13T16:04:04+0000] [ALPM] upgraded kitty-shell-integration (0.26.4-2 -> 0.26.5-1)
[2022-11-13T16:04:04+0000] [ALPM] upgraded kitty (0.26.4-2 -> 0.26.5-1)
[2022-11-13T16:04:05+0000] [ALPM] upgraded lib32-amdvlk (2022.Q4.1-2 -> 2022.Q4.2-1)
[2022-11-13T16:04:05+0000] [ALPM] upgraded lib32-libunistring (1.0-1 -> 1.1-1)
[2022-11-13T16:04:05+0000] [ALPM] upgraded lib32-libidn2 (2.3.4-1 -> 2.3.4-2)
[2022-11-13T16:04:05+0000] [ALPM] upgraded lib32-libpsl (0.21.1-2 -> 0.21.1-3)
[2022-11-13T16:04:05+0000] [ALPM] upgraded lib32-libx11 (1.8.1-1 -> 1.8.2-1)
[2022-11-13T16:04:05+0000] [ALPM] upgraded lib32-mesa (22.2.2-1 -> 22.2.3-1)
[2022-11-13T16:04:05+0000] [ALPM] upgraded lib32-nss (3.84-1 -> 3.85-1)
[2022-11-13T16:04:05+0000] [ALPM] upgraded libappindicator-gtk3 (12.10.0.r296-2 -> 12.10.0.r298-1)
[2022-11-13T16:04:05+0000] [ALPM] upgraded libluv (1.44.2_1-1 -> 1.44.2_1-2)
[2022-11-13T16:04:05+0000] [ALPM] upgraded libsynctex (2022.62885-2 -> 2022.62885-3)
[2022-11-13T16:04:05+0000] [ALPM] upgraded linux (6.0.7.arch1-1 -> 6.0.8.arch1-1)
[2022-11-13T16:04:05+0000] [ALPM] upgraded linux-firmware-whence (20220913.f09bebf-1 -> 20221109.60310c2-1)
[2022-11-13T16:04:05+0000] [ALPM] upgraded linux-firmware (20220913.f09bebf-1 -> 20221109.60310c2-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded linux-headers (6.0.7.arch1-1 -> 6.0.8.arch1-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded lvm2 (2.03.16-2 -> 2.03.17-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded make (4.3-3 -> 4.3-5)
[2022-11-13T16:04:07+0000] [ALPM] upgraded python-setuptools (1:64.0.2-1 -> 1:65.1.1-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded meson (0.63.3-1 -> 0.64.0-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded mlt (7.10.0-1 -> 7.10.0-2)
[2022-11-13T16:04:07+0000] [ALPM] upgraded nextcloud-client (2:3.6.1-2 -> 2:3.6.2-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded nodejs-nopt (6.0.0-1 -> 7.0.0-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded perl-image-exiftool (12.42-1 -> 12.50-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded python-configargparse (1.5.2-1 -> 1.5.3-2)
[2022-11-13T16:04:07+0000] [ALPM] upgraded python-crashtest (0.4.0-2 -> 0.4.1-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded python-dill (0.3.5.1-1 -> 0.3.6-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded python-fasteners (0.17.3-1 -> 0.18-1)
[2022-11-13T16:04:07+0000] [ALPM] installed python-zipp (3.10.0-1)
[2022-11-13T16:04:07+0000] [ALPM] installed python-importlib-metadata (5.0.0-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded python-keyring (23.9.3-1 -> 23.11.0-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded python-lark-parser (1.1.3-1 -> 1.1.4-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded python-paramiko (2.11.0-2 -> 2.11.1-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded python-platformdirs (2.5.2-1 -> 2.5.3-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded python-psutil (5.9.3-1 -> 5.9.4-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded python-pyqt5 (5.15.7-2 -> 5.15.7-3)
[2022-11-13T16:04:07+0000] [ALPM] upgraded python-pyrsistent (0.19.1-1 -> 0.19.2-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded python-pytz (2022.1-1 -> 2022.6-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded python-termcolor (2.0.1-1 -> 2.1.0-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded python-tomlkit (0.11.5-2 -> 0.11.6-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded python-wheel (0.37.1-1 -> 0.38.2-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded qt5-tools (5.15.7+kde+r1-1 -> 5.15.7+kde+r1-2)
[2022-11-13T16:04:07+0000] [ALPM] upgraded qutebrowser (2.5.2-1 -> 2.5.2-2)
[2022-11-13T16:04:07+0000] [ALPM] upgraded rapid-photo-downloader (0.9.33-1 -> 0.9.34-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded sdl12-compat (1.2.56-1 -> 1.2.60-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded signal-desktop (5.62.0-1 -> 5.63.1-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded soundtouch (2.3.1-2 -> 2.3.2-1)
[2022-11-13T16:04:07+0000] [ALPM] upgraded systemd-sysvcompat (251.7-4 -> 252.1-1)
[2022-11-13T16:04:08+0000] [ALPM] upgraded texlive-bin (2022.62885-2 -> 2022.62885-3)
[2022-11-13T16:04:08+0000] [ALPM] upgraded usbutils (014-2 -> 015-1)
[2022-11-13T16:04:08+0000] [ALPM] upgraded vulkan-intel (22.2.2-1 -> 22.2.3-1)
[2022-11-13T16:04:08+0000] [ALPM] upgraded xapian-core (1:1.4.20-1 -> 1:1.4.21-1)
[2022-11-13T16:04:08+0000] [ALPM] upgraded zvbi (0.2.35-4 -> 0.2.37-1)
[2022-11-13T16:04:08+0000] [ALPM] transaction completed
[2022-11-13T16:04:08+0000] [ALPM] running '20-systemd-sysusers.hook'...
[2022-11-13T16:04:08+0000] [ALPM] running '30-systemd-catalog.hook'...
[2022-11-13T16:04:08+0000] [ALPM] running '30-systemd-daemon-reload.hook'...
[2022-11-13T16:04:09+0000] [ALPM] running '30-systemd-hwdb.hook'...
[2022-11-13T16:04:09+0000] [ALPM] running '30-systemd-sysctl.hook'...
[2022-11-13T16:04:09+0000] [ALPM] running '30-systemd-tmpfiles.hook'...
[2022-11-13T16:04:09+0000] [ALPM] running '30-systemd-udev-reload.hook'...
[2022-11-13T16:04:09+0000] [ALPM] running '30-systemd-update.hook'...
[2022-11-13T16:04:09+0000] [ALPM] running '30-update-mime-database.hook'...
[2022-11-13T16:04:09+0000] [ALPM] running '40-update-ca-trust.hook'...
[2022-11-13T16:04:09+0000] [ALPM] running '60-depmod.hook'...
[2022-11-13T16:04:10+0000] [ALPM] running '70-dkms-install.hook'...
[2022-11-13T16:04:10+0000] [ALPM-SCRIPTLET] ==> dkms install --no-depmod vboxhost/7.0.2_OSE -k 6.0.8-arch1-1
[2022-11-13T16:04:15+0000] [ALPM-SCRIPTLET] ==> depmod 6.0.8-arch1-1
[2022-11-13T16:04:15+0000] [ALPM] running '90-mkinitcpio-install.hook'...
[2022-11-13T16:04:15+0000] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2022-11-13T16:04:15+0000] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2022-11-13T16:04:15+0000] [ALPM-SCRIPTLET] ==> Starting build: 6.0.8-arch1-1
[2022-11-13T16:04:16+0000] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2022-11-13T16:04:16+0000] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2022-11-13T16:04:16+0000] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2022-11-13T16:04:16+0000] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2022-11-13T16:04:16+0000] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2022-11-13T16:04:16+0000] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: xhci_pci
[2022-11-13T16:04:16+0000] [ALPM-SCRIPTLET]   -> Running build hook: [encrypt]
[2022-11-13T16:04:17+0000] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: qat_4xxx
[2022-11-13T16:04:17+0000] [ALPM-SCRIPTLET]   -> Running build hook: [lvm2]
[2022-11-13T16:04:17+0000] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2022-11-13T16:04:17+0000] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2022-11-13T16:04:17+0000] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2022-11-13T16:04:17+0000] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2022-11-13T16:04:17+0000] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2022-11-13T16:04:17+0000] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: /boot/initramfs-linux.img
[2022-11-13T16:04:18+0000] [ALPM-SCRIPTLET] ==> Image generation successful
[2022-11-13T16:04:18+0000] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2022-11-13T16:04:18+0000] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2022-11-13T16:04:18+0000] [ALPM-SCRIPTLET] ==> Starting build: 6.0.8-arch1-1
[2022-11-13T16:04:18+0000] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2022-11-13T16:04:18+0000] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2022-11-13T16:04:18+0000] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2022-11-13T16:04:18+0000] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2022-11-13T16:04:18+0000] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2022-11-13T16:04:18+0000] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2022-11-13T16:04:18+0000] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: qed
[2022-11-13T16:04:18+0000] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: qla1280
[2022-11-13T16:04:18+0000] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: qla2xxx
[2022-11-13T16:04:18+0000] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: wd719x
[2022-11-13T16:04:19+0000] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: xhci_pci
[2022-11-13T16:04:19+0000] [ALPM-SCRIPTLET]   -> Running build hook: [encrypt]
[2022-11-13T16:04:20+0000] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: qat_4xxx
[2022-11-13T16:04:20+0000] [ALPM-SCRIPTLET]   -> Running build hook: [lvm2]
[2022-11-13T16:04:20+0000] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2022-11-13T16:04:20+0000] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2022-11-13T16:04:21+0000] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2022-11-13T16:04:21+0000] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2022-11-13T16:04:21+0000] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2022-11-13T16:04:21+0000] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-fallback.img
[2022-11-13T16:04:21+0000] [ALPM-SCRIPTLET] ==> Image generation successful
[2022-11-13T16:04:21+0000] [ALPM] running 'dbus-reload.hook'...
[2022-11-13T16:04:22+0000] [ALPM] running 'detect-old-perl-modules.hook'...
[2022-11-13T16:04:22+0000] [ALPM] running 'gdk-pixbuf-query-loaders.hook'...
[2022-11-13T16:04:22+0000] [ALPM] running 'gtk-update-icon-cache.hook'...
[2022-11-13T16:04:22+0000] [ALPM] running 'texinfo-install.hook'...
[2022-11-13T16:04:22+0000] [ALPM] running 'update-desktop-database.hook'...
[2022-11-13T16:09:09+0000] [PACMAN] Running 'pacman -U --noconfirm --config /etc/pacman.conf -- /home/gideon/.cache/yay/dropbox/dropbox-160.4.4703-1-x86_64.pkg.tar.zst'
[2022-11-13T16:09:09+0000] [ALPM] transaction started
[2022-11-13T16:09:09+0000] [ALPM] upgraded dropbox (158.4.4564-1 -> 160.4.4703-1)
[2022-11-13T16:09:09+0000] [ALPM] transaction completed
[2022-11-13T16:09:09+0000] [ALPM] running '30-systemd-daemon-reload.hook'...
[2022-11-13T16:09:09+0000] [ALPM] running '30-systemd-update.hook'...
[2022-11-13T16:09:09+0000] [ALPM] running 'update-desktop-database.hook'...
[2022-11-13T16:09:19+0000] [PACMAN] Running 'pacman -U --noconfirm --config /etc/pacman.conf -- /home/gideon/.cache/yay/slack-desktop/slack-desktop-4.29.144-1-x86_64.pkg.tar.zst'
[2022-11-13T16:09:19+0000] [ALPM] transaction started
[2022-11-13T16:09:19+0000] [ALPM] upgraded slack-desktop (4.28.184-1 -> 4.29.144-1)
[2022-11-13T16:09:19+0000] [ALPM] transaction completed
[2022-11-13T16:09:19+0000] [ALPM] running '30-systemd-update.hook'...
[2022-11-13T16:09:19+0000] [ALPM] running 'update-desktop-database.hook'...
[2022-11-13T16:09:33+0000] [PACMAN] Running 'pacman -U --noconfirm --config /etc/pacman.conf -- /home/gideon/.cache/yay/zoom/zoom-5.12.6-1-x86_64.pkg.tar.zst'
[2022-11-13T16:09:34+0000] [ALPM] transaction started
[2022-11-13T16:09:34+0000] [ALPM] upgraded zoom (5.12.2-1 -> 5.12.6-1)
[2022-11-13T16:09:34+0000] [ALPM] transaction completed
[2022-11-13T16:09:34+0000] [ALPM] running '30-systemd-update.hook'...
[2022-11-13T16:09:34+0000] [ALPM] running '30-update-mime-database.hook'...
[2022-11-13T16:09:34+0000] [ALPM] running 'update-desktop-database.hook'...

Last edited by gtf21 (2022-11-24 15:53:17)

Offline

#2 2022-11-13 17:34:16

seth
Member
Registered: 2012-09-03
Posts: 33,622

Re: [SOLVED] X11 session (i3) suddenly tinted brown

1. do you run a compositor (picom)?
2. does "xcalib -c" correct the colors (temporarily)?
3. does the tint show up on screenshots?

Offline

#3 2022-11-13 20:18:28

gtf21
Member
Registered: 2020-06-28
Posts: 86
Website

Re: [SOLVED] X11 session (i3) suddenly tinted brown

1. yes, I run picom (although killing it didn't help)
2. yes, xcalib -c temporarily clears the issue (in the X11 session)
3. no, screenshots don't show the issue

Offline

#4 2022-11-13 20:28:06

seth
Member
Registered: 2012-09-03
Posts: 33,622

Re: [SOLVED] X11 session (i3) suddenly tinted brown

2. yes, xcalib -c temporarily clears the issue (in the X11 session)

redshift - or something like redshift - alters the gamma ramps.
How long does the temporary clearance hold? The entire session? You might run redshift in oneshot mode (somewhere in your startup scripts)

Offline

#5 2022-11-13 21:35:08

gtf21
Member
Registered: 2020-06-28
Posts: 86
Website

Re: [SOLVED] X11 session (i3) suddenly tinted brown

Clearance seems to hold the entire session. Even with redshift turned on, if I (via the redshift-gtk gui) temporarly disable redshift the display returns to normal which _did not_ happen before using `xcalib -c`. I had tried disabling redshift entirely in systemctl both user and system level (just in case) and it didn't help. I don't run it anywhere else in my startup scripts, i3 config, etc..

Offline

#6 2022-11-14 07:01:54

seth
Member
Registered: 2012-09-03
Posts: 33,622

Re: [SOLVED] X11 session (i3) suddenly tinted brown

We should then maybe look at your init scripts.
See whether the same happens w/ eg. an openbox session (to figure whether it's i3 specific or a more general thing) and post your startup scripts and also

systemctl --user list-units --type=service

Offline

#7 2022-11-14 15:12:23

gtf21
Member
Registered: 2020-06-28
Posts: 86
Website

Re: [SOLVED] X11 session (i3) suddenly tinted brown

I modified my `.xinitrc` to launch `bspwm` instead of `i3` and it was still tinted brown.

~ > systemctl --user list-units --type=service
  UNIT                                LOAD   ACTIVE SUB     DESCRIPTION                                         
  at-spi-dbus-bus.service             loaded active running Accessibility services bus
  dbus.service                        loaded active running D-Bus User Message Bus
  dconf.service                       loaded active running User preferences database
  dunst.service                       loaded active running Dunst notification daemon
● duplicity.service                   loaded failed failed  Duplicity Backup Service
● geoclue2.service                    loaded failed failed  Geoclue2 Location Updater
  gpg-agent.service                   loaded active running GnuPG cryptographic agent and passphrase cache
  gvfs-daemon.service                 loaded active running Virtual filesystem service
  gvfs-gphoto2-volume-monitor.service loaded active running Virtual filesystem service - digital camera monitor
  gvfs-udisks2-volume-monitor.service loaded active running Virtual filesystem service - disk device monitor
● mbsync.service                      loaded failed failed  Mailbox Syncronisation Service
  playerctld.service                  loaded active running Media Player Control Daemon
  pulseaudio.service                  loaded active running Sound Service
● redshift-gtk.service                loaded failed failed  Redshift display colour temperature adjustment (GUI)
  ssh-agent.service                   loaded active running SSH key agent
● vdirsyncer.service                  loaded failed failed  Calendar Synchronisation Service

(I have some issues with some of my scripts at the moment.)

I did notice that redshift-gtk is failing to start, so despite the fact that I don't think it is causing the issue (as previously mentioned), the log might provide some clues?

Nov 13 20:43:19 anaximander systemd[1101]: Started Redshift display colour temperature adjustment (GUI).
Nov 13 20:43:19 anaximander redshift-gtk[1248]: gtk_icon_theme_get_for_screen: assertion 'GDK_IS_SCREEN (screen)' failed
Nov 13 20:43:19 anaximander redshift-gtk[1248]: /usr/lib/python3.10/site-packages/redshift_gtk/statusicon.py:58: Warning: invalid (NULL) pointer instance
Nov 13 20:43:19 anaximander redshift-gtk[1248]:   self.indicator = appindicator.Indicator.new(
Nov 13 20:43:19 anaximander redshift-gtk[1248]: /usr/lib/python3.10/site-packages/redshift_gtk/statusicon.py:58: Warning: g_signal_connect_data: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed
Nov 13 20:43:19 anaximander redshift-gtk[1248]:   self.indicator = appindicator.Indicator.new(
Nov 13 20:43:19 anaximander redshift-gtk[1248]: _gtk_style_provider_private_get_settings: assertion 'GTK_IS_STYLE_PROVIDER_PRIVATE (provider)' failed
Nov 13 20:43:19 anaximander redshift-gtk[1248]: _gtk_style_provider_private_get_settings: assertion 'GTK_IS_STYLE_PROVIDER_PRIVATE (provider)' failed
Nov 13 20:43:19 anaximander redshift-gtk[1248]: _gtk_style_provider_private_get_settings: assertion 'GTK_IS_STYLE_PROVIDER_PRIVATE (provider)' failed
Nov 13 20:43:19 anaximander systemd-coredump[1255]: [?] Process 1248 (redshift-gtk) of user 1000 dumped core.
                                                    
                                                    Stack trace of thread 1248:
                                                    #0  0x00007f1373f13f54 n/a (libgtk-3.so.0 + 0x113f54)
                                                    #1  0x00007f1373f34556 n/a (libgtk-3.so.0 + 0x134556)
                                                    #2  0x00007f1373f1e5d5 n/a (libgtk-3.so.0 + 0x11e5d5)
                                                    #3  0x00007f137599d75b g_type_create_instance (libgobject-2.0.so.0 + 0x3d75b)
                                                    #4  0x00007f1375984561 n/a (libgobject-2.0.so.0 + 0x24561)
                                                    #5  0x00007f1375985dc0 g_object_new_with_properties (libgobject-2.0.so.0 + 0x25dc0)
                                                    #6  0x00007f1375986bba g_object_new (libgobject-2.0.so.0 + 0x26bba)
                                                    #7  0x00007f1374132ffc n/a (libgtk-3.so.0 + 0x332ffc)
                                                    #8  0x00007f137599d75b g_type_create_instance (libgobject-2.0.so.0 + 0x3d75b)
                                                    #9  0x00007f1375984561 n/a (libgobject-2.0.so.0 + 0x24561)
                                                    #10 0x00007f1375985dc0 g_object_new_with_properties (libgobject-2.0.so.0 + 0x25dc0)
                                                    #11 0x00007f1376836a34 n/a (_gi.cpython-310-x86_64-linux-gnu.so + 0x13a34)
                                                    #12 0x00007f137654eb23 _PyObject_MakeTpCall (libpython3.10.so.1.0 + 0x14eb23)
                                                    #13 0x00007f1376549f06 _PyEval_EvalFrameDefault (libpython3.10.so.1.0 + 0x149f06)
                                                    #14 0x00007f137654de2b _PyObject_FastCallDictTstate (libpython3.10.so.1.0 + 0x14de2b)
                                                    #15 0x00007f137655db3d n/a (libpython3.10.so.1.0 + 0x15db3d)
                                                    #16 0x00007f137654eb23 _PyObject_MakeTpCall (libpython3.10.so.1.0 + 0x14eb23)
                                                    #17 0x00007f137654992c _PyEval_EvalFrameDefault (libpython3.10.so.1.0 + 0x14992c)
                                                    #18 0x00007f1376555959 _PyFunction_Vectorcall (libpython3.10.so.1.0 + 0x155959)
                                                    #19 0x00007f1376544b16 _PyEval_EvalFrameDefault (libpython3.10.so.1.0 + 0x144b16)
                                                    #20 0x00007f1376543760 n/a (libpython3.10.so.1.0 + 0x143760)
                                                    #21 0x00007f13765f0e04 PyEval_EvalCode (libpython3.10.so.1.0 + 0x1f0e04)
                                                    #22 0x00007f13766015b3 n/a (libpython3.10.so.1.0 + 0x2015b3)
                                                    #23 0x00007f13765fcd0a n/a (libpython3.10.so.1.0 + 0x1fcd0a)
                                                    #24 0x00007f13764a11cd n/a (libpython3.10.so.1.0 + 0xa11cd)
                                                    #25 0x00007f13764a0e7e _PyRun_SimpleFileObject (libpython3.10.so.1.0 + 0xa0e7e)
                                                    #26 0x00007f13764a1831 _PyRun_AnyFileObject (libpython3.10.so.1.0 + 0xa1831)
                                                    #27 0x00007f137660dd9d Py_RunMain (libpython3.10.so.1.0 + 0x20dd9d)
                                                    #28 0x00007f13765e25eb Py_BytesMain (libpython3.10.so.1.0 + 0x1e25eb)
                                                    #29 0x00007f137623c290 n/a (libc.so.6 + 0x23290)
                                                    #30 0x00007f137623c34a __libc_start_main (libc.so.6 + 0x2334a)
                                                    #31 0x0000559c53253045 _start (python3.10 + 0x1045)

                                                    Stack trace of thread 1250:
                                                    #0  0x00007f13763140bf __poll (libc.so.6 + 0xfb0bf)
                                                    #1  0x00007f1375a6d1df n/a (libglib-2.0.so.0 + 0xac1df)
                                                    #2  0x00007f1375a15132 g_main_context_iteration (libglib-2.0.so.0 + 0x54132)
                                                    #3  0x00007f1375a15182 n/a (libglib-2.0.so.0 + 0x54182)
                                                    #4  0x00007f1375a43e05 n/a (libglib-2.0.so.0 + 0x82e05)
                                                    #5  0x00007f137629f8fd n/a (libc.so.6 + 0x868fd)
                                                    #6  0x00007f1376321a60 n/a (libc.so.6 + 0x108a60)
                                                    
                                                    Stack trace of thread 1251:
                                                    #0  0x00007f13763197fd syscall (libc.so.6 + 0x1007fd)
                                                    #1  0x00007f1375a66ad7 g_cond_wait_until (libglib-2.0.so.0 + 0xa5ad7)
                                                    #2  0x00007f13759e4893 n/a (libglib-2.0.so.0 + 0x23893)
                                                    #3  0x00007f1375a496cb n/a (libglib-2.0.so.0 + 0x886cb)
                                                    #4  0x00007f1375a43e05 n/a (libglib-2.0.so.0 + 0x82e05)
                                                    #5  0x00007f137629f8fd n/a (libc.so.6 + 0x868fd)
                                                    #6  0x00007f1376321a60 n/a (libc.so.6 + 0x108a60)
                                                    
                                                    Stack trace of thread 1253:
                                                    #0  0x00007f13763140bf __poll (libc.so.6 + 0xfb0bf)
                                                    #1  0x00007f1375a6d1df n/a (libglib-2.0.so.0 + 0xac1df)
                                                    #2  0x00007f1375a15ddf g_main_loop_run (libglib-2.0.so.0 + 0x54ddf)
                                                    #3  0x00007f137580133c n/a (libgio-2.0.so.0 + 0x10a33c)
                                                    #4  0x00007f1375a43e05 n/a (libglib-2.0.so.0 + 0x82e05)
                                                    #5  0x00007f137629f8fd n/a (libc.so.6 + 0x868fd)
                                                    #6  0x00007f1376321a60 n/a (libc.so.6 + 0x108a60)
                                                    
                                                    Stack trace of thread 1252:
                                                    #0  0x00007f13763197fd syscall (libc.so.6 + 0x1007fd)
                                                    #1  0x00007f1375a66ad7 g_cond_wait_until (libglib-2.0.so.0 + 0xa5ad7)
                                                    #2  0x00007f13759e4893 n/a (libglib-2.0.so.0 + 0x23893)
                                                    #3  0x00007f1375a496cb n/a (libglib-2.0.so.0 + 0x886cb)
                                                    #4  0x00007f1375a43e05 n/a (libglib-2.0.so.0 + 0x82e05)
                                                    #5  0x00007f137629f8fd n/a (libc.so.6 + 0x868fd)
                                                    #6  0x00007f1376321a60 n/a (libc.so.6 + 0x108a60)
                                                    ELF object binary architecture: AMD x86-64
Nov 13 20:43:19 anaximander systemd[1101]: redshift-gtk.service: Main process exited, code=dumped, status=11/SEGV
Nov 13 20:43:19 anaximander systemd[1101]: redshift-gtk.service: Failed with result 'core-dump'.

Offline

#8 2022-11-14 15:37:46

seth
Member
Registered: 2012-09-03
Posts: 33,622

Re: [SOLVED] X11 session (i3) suddenly tinted brown

I did notice that redshift-gtk is failing to start, so despite the fact that I don't think it is causing the issue (as previously mentioned), the log might provide some clues?

I'd start by disabling the service - in doubt it starts, alters the gamma ramps, wets itself and leaves some mess behind…

It looks a bit like it's deperate for a systray (and perhaps simply too early)

Offline

#9 2022-11-14 15:37:57

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 27,570
Website

Re: [SOLVED] X11 session (i3) suddenly tinted brown

Sorry if this is a silly question as I've not used it myself, but if it's apparent that the unwanted color change is coming from redshift, and resetting the color to a default gives results you like, why do you have redshift installed / enabled in the first place?


"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#10 2022-11-14 15:47:00

seth
Member
Registered: 2012-09-03
Posts: 33,622

Re: [SOLVED] X11 session (i3) suddenly tinted brown

Iff this is triggered by redshift (not yet identitfied), it's likely simply misbehaving.

redshift otherwise is one usable option to either color correct a tooblue™ panel (notebook panels usually don't have built-in color settings and are tooblue™ because that makes them look brighter and more expensive…) or to simply color-adjust the panel over the day.

Offline

#11 2022-11-14 17:13:26

gtf21
Member
Registered: 2020-06-28
Posts: 86
Website

Re: [SOLVED] X11 session (i3) suddenly tinted brown

To be clear: after resetting the colours with xcalib -c, I run redshift just fine and, throughout the afternoon / evening, it gradually reddens the display. When I get home later I'll try to uninstall redshift to see if there's somewhere I'm calling it that is strange and causing this weird setting of the gamma ramps.

As per the below,  i had already tried disabling the service but the problem persisted.

gtf21 wrote:

I had tried disabling redshift entirely in systemctl both user and system level (just in case) and it didn't help. I don't run it anywhere else in my startup scripts, i3 config, etc..

Offline

#12 2022-11-14 22:47:58

gtf21
Member
Registered: 2020-06-28
Posts: 86
Website

Re: [SOLVED] X11 session (i3) suddenly tinted brown

Can confirm: after uninstalling redshift I rebooted. X session was still brown when I started it. Had to run xcalib -c to fix it. Pretty sure it's not redshift at this point.

Offline

#13 2022-11-15 07:45:16

seth
Member
Registered: 2012-09-03
Posts: 33,622

Re: [SOLVED] X11 session (i3) suddenly tinted brown

So let's see your session scripts - perhaps especially because of

(I have some issues with some of my scripts at the moment.)

Offline

#14 2022-11-22 10:09:10

gtf21
Member
Registered: 2020-06-28
Posts: 86
Website

Re: [SOLVED] X11 session (i3) suddenly tinted brown

When I say there are problems with them, it's because I have an issue with my backup and mail-download scripts, which is the bulk of my init scripts. The only other thing which is initialised graphically is picom.

Strangely enough, I've now uninstalled redshift completely but when I woke my laptop up from sleep this morning it was back to being brown-tinted, so it feels like *something* is setting the gamma ramps actively I just can't work out what it is from the process list.

Offline

#15 2022-11-22 11:06:39

seth
Member
Registered: 2012-09-03
Posts: 33,622

Re: [SOLVED] X11 session (i3) suddenly tinted brown

seth wrote:

So let's see your session scripts

Offline

#16 2022-11-24 15:53:00

gtf21
Member
Registered: 2020-06-28
Posts: 86
Website

Re: [SOLVED] X11 session (i3) suddenly tinted brown

I found the problem (quite by mistake) when I noticed that it happened most often when unplugging my laptop from my screen. This triggered autorandr, and, basically, the problem was that some of my autorandr profiles had gamma definitions in their configuration (maybe I had saved them when redshift was active, I'm not sure). Removing the gamma configuration from the autorandr files solved the problem.

Offline

Board footer

Powered by FluxBB