You are not logged in.

#1 2004-02-27 06:08:03

lilsirecho
Veteran
Registered: 2003-10-24
Posts: 5,000

USB 2.0 in arch2.4.25

big_smile  smile Gents;

   Would be pleased to know if anyone has had USB 2.0 performance from a usb-storage device in arch.

   Comments from googling indicate it is experimental and may not perform.

   If someone has it going, what transfer speed is obtained?

    Typically, ehci-hcd is utilized...in my system it appears as "unused".


Sign of the times: Navajo blanket..made in China
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit!     X-ray confirms Iam spineless!

Offline

#2 2004-02-27 09:50:40

Mr Green
Forum Fellow
From: U.K.
Registered: 2003-12-21
Posts: 5,751

Re: USB 2.0 in arch2.4.25

Hi

I am having trouble with USB 2.0 as well (ehci) ...pacman -S usbview & take a look....I am using 2.6.3 though ....

I have read about USB 2.0 it seems in later 2.4 & 2.6 there is some support ...but what does that mean lol

Anyway I will keep us posted if I have any luck.....

Mr Green


Mr Green

Offline

#3 2004-02-27 17:50:13

lilsirecho
Veteran
Registered: 2003-10-24
Posts: 5,000

Re: USB 2.0 in arch2.4.25

big_smile  smile Mr. Green;

    Thanks for reply.  I have an asus a7v333 mobo with 2.0 built-in and have yet to get it to run at 2.0 speed.

     An article dated Feb 2004 is provided at www.linux-usb.org/devices.html which is quite extensive in its details.  If you haven't googled it I recommend it for background and up-to-date info.

     I wish you success with 2.0 soon!!!


Sign of the times: Navajo blanket..made in China
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit!     X-ray confirms Iam spineless!

Offline

#4 2004-02-27 19:42:47

lilsirecho
Veteran
Registered: 2003-10-24
Posts: 5,000

Re: USB 2.0 in arch2.4.25

big_smile  smile

   Have downloaded ...usbview....hotplug......usbutils....

   Find...../sbin/hotplug....../etc/hotplug.d.....

   What more is needed?   Is there a setup or config required for USB 2.0?


Sign of the times: Navajo blanket..made in China
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit!     X-ray confirms Iam spineless!

Offline

#5 2004-02-27 19:45:05

sarah31
Member
From: Middle of Canada
Registered: 2002-08-20
Posts: 2,975
Website

Re: USB 2.0 in arch2.4.25

i thought hotplug was part of the base?

usbutils is in the current repo too i think.i

as for what to do next ...  google.com/linux


AKA uknowme

I am not your friend

Offline

#6 2004-02-27 22:38:28

lilsirecho
Veteran
Registered: 2003-10-24
Posts: 5,000

Re: USB 2.0 in arch2.4.25

big_smile  smile Sarah

    Obviously the two pkgs I listed were not included in the original download.

    I have googled and determined that I need uhci-hcd ohci-hcd ehci-hcd ohci and uhci ehci-hcd modules in arch.

    I have listed these as alias entries in /etc/modules.conf and in the modules= category of /etc/rc.conf.

   Googling reveals that lsmod shows the loaded modules.  My lsmod does not show but just ehci-hcd.  Googling reveals that at least one (if not more) of the others is needed along with ehci-hcd. 

   Perhaps googling reveals info that doesn't apply to arch?


Sign of the times: Navajo blanket..made in China
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit!     X-ray confirms Iam spineless!

Offline

#7 2004-02-28 20:22:05

lilsirecho
Veteran
Registered: 2003-10-24
Posts: 5,000

Re: USB 2.0 in arch2.4.25

big_smile  smile Additional info re: USB2.0 ehci-hcd.....         usbdevfs
         hub
96-111: hiddev
         hid
         usb-storage
   This in /proc/bus/usb/drivers.
   The following is dmesg:[root@n6re root]# dmesg
ta: 6
host/uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6
hub.c: port 1, portstatus 101, change 2, 12 Mb/s
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: new USB device 00:09.0-1, assigned address 2
host/uhci.c: root-hub INT complete: port1: 49b port2: 48a data: 6
host/uhci.c: root-hub INT complete: port1: 495 port2: 48a data: 4
usb.c: kmalloc IF dfe0d2e0, numif 1
usb.c: new device strings: Mfr=73, Product=90, SerialNumber=0
usb.c: USB device number 2 default language ID 0x409
Manufacturer: In-System Design
Product: USB Storage Adapter
usb.c: unhandled interfaces on device
usb.c: USB device 2 (vend/prod 0x5ab/0x60) is not claimed by any active driver.
  Length              = 18
  DescriptorType      = 01
  USB version         = 2.00
  Vendor:Product      = 05ab:0060
  MaxPacketSize0      = 64
  NumConfigurations   = 1
  Device version      = 11.01
  Device Class:SubClass:Protocol = 00:00:00
    Per-interface classes
Configuration:
  bLength             =    9
  bDescriptorType     =   02
  wTotalLength        = 0027
  bNumInterfaces      =   01
  bConfigurationValue =   02
  iConfiguration      =   00
  bmAttributes        =   c0
  MaxPower            =   98mA

  Interface: 0
  Alternate Setting:  0
    bLength             =    9
    bDescriptorType     =   04
    bInterfaceNumber    =   00
    bAlternateSetting   =   00
    bNumEndpoints       =   03
    bInterface Class:SubClass:Protocol =   08:06:50
    iInterface          =   00
    Endpoint:
      bLength             =    7
      bDescriptorType     =   05
      bEndpointAddress    =   01 (out)
      bmAttributes        =   02 (Bulk)
      wMaxPacketSize      = 0040
      bInterval           =   00
    Endpoint:
      bLength             =    7
      bDescriptorType     =   05
      bEndpointAddress    =   82 (in)
      bmAttributes        =   02 (Bulk)
      wMaxPacketSize      = 0040
      bInterval           =   00
    Endpoint:
      bLength             =    7
      bDescriptorType     =   05
      bEndpointAddress    =   83 (in)
      bmAttributes        =   03 (Interrupt)
      wMaxPacketSize      = 0002
      bInterval           =   20
usb.c: kusbd: /sbin/hotplug add 2
host/uhci.c: root-hub INT complete: port1: 48a port2: 48a data: 6
host/uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6
hub.c: port 2, portstatus 100, change 3, 12 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 100, change 3, 12 Mb/s
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
hub.c: port 2, portstatus 100, change 3, 12 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 100, change 3, 12 Mb/s
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: port 2, portstatus 100, change 2, 12 Mb/s
hub.c: port 2 enable change, status 100
hub.c: port 1, portstatus 101, change 3, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 3, 12 Mb/s
host/uhci.c: root-hub INT complete: port1: 499 port2: 48a data: 6
hub.c: port 1, portstatus 101, change 2, 12 Mb/s
host/uhci.c: root-hub INT complete: port1: 488 port2: 488 data: 6
hub.c: port 1, portstatus 101, change 2, 12 Mb/s
host/uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6
hub.c: port 1, portstatus 101, change 2, 12 Mb/s
host/uhci.c: root-hub INT complete: port1: 499 port2: 48a data: 6
hub.c: port 1, portstatus 101, change 2, 12 Mb/s
host/uhci.c: root-hub INT complete: port1: 488 port2: 488 data: 6
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: new USB device 00:11.2-1, assigned address 2
host/uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6
usb.c: kmalloc IF dfb0ff40, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
usb.c: USB device number 2 default language ID 0x409
Manufacturer: Silitek
Product: IBM USB HUB KEYBOARD
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: part of a compound device
hub.c: individual port power switching
hub.c: individual port over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 44ms
hub.c: hub controller current requirement: 100mA
hub.c: port removable status: FRR
hub.c: local power source is lost (inactive)
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface dfb0ff40
usb.c: kusbd: /sbin/hotplug add 2
hub.c: port 2, portstatus 100, change 3, 12 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 100, change 3, 12 Mb/s
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
host/uhci.c: root-hub INT complete: port1: 495 port2: 488 data: 4
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
host/uhci.c: root-hub INT complete: port1: 488 port2: 488 data: 6
host/uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
host/uhci.c: root-hub INT complete: port1: 495 port2: 488 data: 4
Adding Swap: 262576k swap-space (priority -1)
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
host/uhci.c: root-hub INT complete: port1: 488 port2: 488 data: 6
host/uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 103, change 10, 12 Mb/s
hub.c: new USB device 00:11.2-1.1, assigned address 3
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
usb.c: kmalloc IF c17aba60, numif 2
usb.c: skipped 1 class/vendor specific interface descriptors
usb.c: skipped 1 class/vendor specific interface descriptors
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
usb.c: USB device number 3 default language ID 0x409
Manufacturer: Silitek
Product: IBM USB HUB KEYBOARD
host/uhci.c: root-hub INT complete: port1: 495 port2: 488 data: 4
host/uhci.c: root-hub INT complete: port1: 488 port2: 488 data: 6
host/uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6
SCSI subsystem driver Revision: 1.00
host/uhci.c: root-hub INT complete: port1: 495 port2: 488 data: 4
host/uhci.c: root-hub INT complete: port1: 488 port2: 488 data: 6
host/uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6
Real Time Clock Driver v1.10f
host/uhci.c: root-hub INT complete: port1: 495 port2: 488 data: 4
host/uhci.c: root-hub INT complete: port1: 488 port2: 488 data: 6
host/uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6
host/uhci.c: root-hub INT complete: port1: 495 port2: 488 data: 4
host/uhci.c: root-hub INT complete: port1: 488 port2: 488 data: 6
host/uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6
host/uhci.c: root-hub INT complete: port1: 495 port2: 488 data: 4
host/uhci.c: root-hub INT complete: port1: 488 port2: 488 data: 6
host/uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6
host/uhci.c: root-hub INT complete: port1: 495 port2: 488 data: 4
host/uhci.c: root-hub INT complete: port1: 488 port2: 488 data: 6
host/uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6
host/uhci.c: root-hub INT complete: port1: 495 port2: 488 data: 4
host/uhci.c: root-hub INT complete: port1: 488 port2: 488 data: 6
host/uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6
host/uhci.c: root-hub INT complete: port1: 495 port2: 488 data: 4
host/uhci.c: root-hub INT complete: port1: 488 port2: 488 data: 6
host/uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6
host/uhci.c: root-hub INT complete: port1: 495 port2: 488 data: 4
host/uhci.c: root-hub INT complete: port1: 488 port2: 488 data: 6
host/uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6
host/uhci.c: root-hub INT complete: port1: 495 port2: 488 data: 4
host/uhci.c: root-hub INT complete: port1: 488 port2: 488 data: 6
host/uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6
host/uhci.c: root-hub INT complete: port1: 495 port2: 488 data: 4
host/uhci.c: root-hub INT complete: port1: 488 port2: 488 data: 6
host/uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6
host/uhci.c: root-hub INT complete: port1: 495 port2: 488 data: 4
host/uhci.c: root-hub INT complete: port1: 488 port2: 488 data: 6
host/uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6
host/uhci.c: root-hub INT complete: port1: 495 port2: 488 data: 4
input: USB HID v1.00 Keyboard [Silitek IBM USB HUB KEYBOARD] on usb3:3.0
usb.c: hid driver claimed interface c17aba60
host/uhci.c: root-hub INT complete: port1: 488 port2: 488 data: 6
host/uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6
host/uhci.c: root-hub INT complete: port1: 495 port2: 488 data: 4
input: USB HID v1.00 Device [Silitek IBM USB HUB KEYBOARD] on usb3:3.1
usb.c: hid driver claimed interface c17aba78
usb.c: kusbd: /sbin/hotplug add 3
usb.c: kusbd: /sbin/hotplug add 3
hub.c: port 2, portstatus 301, change 1, 1.5 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 301, change 1, 1.5 Mb/s
host/uhci.c: root-hub INT complete: port1: 488 port2: 488 data: 6
host/uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6
hub.c: port 2, portstatus 301, change 0, 1.5 Mb/s
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: HITACHI_  Model: DK23BA-10B        Rev: 00E2
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
host/uhci.c: root-hub INT complete: port1: 495 port2: 488 data: 4
hub.c: port 2, portstatus 301, change 0, 1.5 Mb/s
SCSI device sda: 19640880 512-byte hdwr sectors (10056 MB)
/dev/scsi/host0/bus0/target0/lun0:<7>host/uhci.c: root-hub INT complete: port1: 488 port2: 488 data: 6
hub.c: port 2, portstatus 301, change 0, 1.5 Mb/s
host/uhci.c: root-hub INT complete: port1: 48a port2: 58a data: 6
hub.c: port 2, portstatus 301, change 0, 1.5 Mb/s
hub.c: port 2, portstatus 303, change 10, 1.5 Mb/s
hub.c: new USB device 00:11.2-1.2, assigned address 4
host/uhci.c: root-hub INT complete: port1: 495 port2: 488 data: 4
usb.c: kmalloc IF de97fc40, numif 1
usb.c: skipped 1 class/vendor specific interface descriptors
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
usb.c: USB device number 4 default language ID 0x409
Manufacturer: Logitech
Product: USB-PS/2 Optical Mouse
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb3:4.0
usb.c: hid driver claimed interface de97fc40
usb.c: kusbd: /sbin/hotplug add 4
hub.c: port 3, portstatus 100, change 0, 12 Mb/s
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: port 2, portstatus 303, change 0, 1.5 Mb/s
hub.c: port 3, portstatus 100, change 0, 12 Mb/s
hub.c: port 1, portstatus 100, change 2, 12 Mb/s
hub.c: port 1 enable change, status 100
hub.c: port 2, portstatus 100, change 2, 12 Mb/s
hub.c: port 2 enable change, status 100
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: port 2, portstatus 100, change 2, 12 Mb/s
hub.c: port 2 enable change, status 100
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
hub.c: port 2, portstatus 300, change 3, 1.5 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 300, change 3, 1.5 Mb/s
host/uhci.c: root-hub INT complete: port1: 488 port2: 588 data: 6
hub.c: port 1, portstatus 100, change 2, 12 Mb/s
hub.c: port 1 enable change, status 100
hub.c: port 2, portstatus 300, change 2, 1.5 Mb/s
hub.c: port 2 enable change, status 300
p1
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
usb.c: usb-storage driver claimed interface dfe0d2e0
USB Mass Storage support registered.
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
  http://www.scyld.com/network/ne2k-pci.html
eth0: RealTek RTL-8029 found at 0x9000, IRQ 19, 00:E0:7D:74:ED:3F.
cmpci: version $Revision: 6.16 $ time 10:08:23 Feb 18 2004
cmpci: found CM8738 adapter at io 0xb800 irq 17
cmpci: chip version = 055
ehci_hcd 00:09.2: VIA Technologies, Inc. USB 2.0
ehci_hcd 00:09.2: irq 17, pci mem e0905000
usb.c: new USB bus registered, assigned bus number 5
ehci_hcd 00:09.2: ehci_start hcs_params 0x2204 dbg=0 cc=2 pcc=2 ordered !ppc ports=4
ehci_hcd 00:09.2: ehci_start hcc_params 0002 thresh 0 uframes 256/512/1024
ehci_hcd 00:09.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 00:09.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
ehci_hcd 00:09.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Dec-29/2.4
hcd.c: 00:09.2 root hub device address 1
host/uhci.c: root-hub INT complete: port1: 49a port2: 480 data: 2
host/uhci.c: b400: suspend_hc
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
usb.c: USB disconnect on device 00:09.0-1 address 2
usb.c: kusbd: /sbin/hotplug remove 2
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
usb.c: kmalloc IF dd8bcae0, numif 1
usb.c: new device strings: Mfr=3, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Manufacturer: Linux 2.4.25 ehci_hcd
Product: VIA Technologies, Inc. USB 2.0
SerialNumber: 00:09.2
hub.c: USB hub found
hub.c: 4 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: individual port over-current protection
hub.c: Single TT
hub.c: TT requires at most 8 FS bit times
hub.c: Port indicators are not supported
hub.c: power on to power good time: 0ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RRRR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface dd8bcae0
usb.c: kusbd: /sbin/hotplug add 1
host/uhci.c: root-hub INT complete: port1: 498 port2: 480 data: 2
hub.c: port 1, portstatus 100, change 2, 12 Mb/s
hub.c: port 1 enable change, status 100
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
ehci_hcd 00:09.2: GetStatus port 1 status 001803 POWER sig=j  CSC CONNECT
hub.c: port 1, portstatus 501, change 1, 480 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 501, change 1, 480 Mb/s
hub.c: port 1, portstatus 501, change 0, 480 Mb/s
hub.c: port 1, portstatus 501, change 0, 480 Mb/s
hub.c: port 1, portstatus 501, change 0, 480 Mb/s
hub.c: port 1, portstatus 501, change 0, 480 Mb/s
hub.c: port 1, portstatus 511, change 0, 480 Mb/s
hub.c: port 1 of hub 1 not reset yet, waiting 10ms
hub.c: port 1, portstatus 511, change 0, 480 Mb/s
hub.c: port 1 of hub 1 not reset yet, waiting 10ms
ehci_hcd 00:09.2: port 1 high speed
ehci_hcd 00:09.2: GetStatus port 1 status 001005 POWER sig=se0  PE CONNECT
hub.c: port 1, portstatus 503, change 10, 480 Mb/s
hub.c: new USB device 00:09.2-1, assigned address 2
usb.c: kmalloc IF dd8bc540, numif 1
usb.c: new device strings: Mfr=73, Product=90, SerialNumber=0
usb.c: USB device number 2 default language ID 0x409
Manufacturer: In-System Design
Product: USB Storage Adapter
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
usb.c: usb-storage driver claimed interface dd8bc540
usb.c: kusbd: /sbin/hotplug add 2
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
hub.c: port 3, portstatus 100, change 0, 12 Mb/s
hub.c: port 4, portstatus 100, change 0, 12 Mb/s
eth0: no IPv6 routers present
hde: irq timeout: status=0xd0 { Busy }
hde: irq timeout: error=0xd0LastFailedSense 0x0d
hde: DMA disabled
hde: ATAPI reset complete
[root@n6re root]#

    It looks like the system addresses ehci-hcd but then leaves it.


Sign of the times: Navajo blanket..made in China
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit!     X-ray confirms Iam spineless!

Offline

#8 2004-02-29 23:16:29

lilsirecho
Veteran
Registered: 2003-10-24
Posts: 5,000

Re: USB 2.0 in arch2.4.25

big_smile  smile    Loaded kernel2.6.3-1 and have yet to get USB 2.0 to run.

   Kernel boots and /proc/bus/usb lists devices ok but no drivers..


Sign of the times: Navajo blanket..made in China
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit!     X-ray confirms Iam spineless!

Offline

#9 2004-03-01 01:03:05

lilsirecho
Veteran
Registered: 2003-10-24
Posts: 5,000

Re: USB 2.0 in arch2.4.25

big_smile  smile

    lsmod;
[root@n6re root]# lsmod
Module                  Size  Used by
sr_mod                 15140  0
sd_mod                 12192  2
snd_pcm_oss            50468  0
snd_mixer_oss          18176  1 snd_pcm_oss
snd_cmipci             34356  1
snd_pcm                92192  2 snd_pcm_oss,snd_cmipci
snd_page_alloc          9860  1 snd_pcm
snd_opl3_lib            9856  1 snd_cmipci
snd_timer              23428  2 snd_pcm,snd_opl3_lib
snd_hwdep               7712  1 snd_opl3_lib
gameport                4224  1 snd_cmipci
snd_mpu401_uart         7040  1 snd_cmipci
snd_rawmidi            21280  1 snd_mpu401_uart
snd_seq_device          6920  2 snd_opl3_lib,snd_rawmidi
snd                    49124  12 snd_pcm_oss,snd_mixer_oss,snd_cmipci,snd_pcm,snd_opl3_lib,snd_timer,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore               8160  1 snd
ohci_hcd               17924  0
ne2k_pci                8160  0
8390                    9472  1 ne2k_pci
crc32                   4352  1 8390
vfat                   13568  2
fat                    41248  1 vfat
usb_storage           101648  1
[root@n6re root]#


I note that ehci-hcd is not listed....is that because its not needed for USB2.0?


Sign of the times: Navajo blanket..made in China
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit!     X-ray confirms Iam spineless!

Offline

Board footer

Powered by FluxBB