You are not logged in.

Pages: 1

#1 2023-09-21 06:54:51

asdl0
Member
Registered: 2023-09-21
Posts: 12

[SOLVED] Switching from Intel integrated graphics to Nvidia

Recently installed Arch Linux for the first time and noticed it was very slow while gaming and figured out that I was using Mesa Intel(R) UHD Graphics 630 instead of Nvidia graphics, I tried a solution from another post but that didn't seem to work out for me.

This was the solution I tried:
https://bbs.archlinux.org/viewtopic.php?id=260663

If anyone could help that would be great because I'm very new to Arch and have no idea how to fix this.

Last edited by asdl0 (2023-09-24 06:49:28)

Offline

#2 2023-09-21 10:25:12

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 24,928

Re: [SOLVED] Switching from Intel integrated graphics to Nvidia

If you can't switch completely in BIOS/UEFI which should be preffered:

The simplest, ready made solution for most nvidia cards is installing nvidia-prime and using the prime-run command to start a game in question as described in: https://wiki.archlinux.org/title/PRIME# … er_offload

On GPUs/CPU combinations like yours that are a bit older, this will lead to not being able to fully suspend the nvidia card while not in which will have a higher power draw. If you want more control over this, other options are outlined in: https://wiki.archlinux.org/title/NVIDIA_Optimus -- note that none of the other options outlined here will generally give you better performance than the PRIME method, if performance is your main concern and you don't care about power draw you should stick with PRIME or disabling the iGPU completely.

Last edited by V1del (2023-09-21 10:26:55)

Offline

#3 2023-09-23 06:38:12

asdl0
Member
Registered: 2023-09-21
Posts: 12

Re: [SOLVED] Switching from Intel integrated graphics to Nvidia

I now have a different issue, whenever I switch to my nvidia gpu and reboot it shows Failed to start nvidia persistence daemon. Is there a way to fix this?

and when I run lspci -k | grep -A 2 -E "(VGA|3D)" it doesn't even show my nvidia card anymore it just shows intel.

Last edited by asdl0 (2023-09-23 06:41:29)

Offline

#4 2023-09-23 07:08:41

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 71,023

Re: [SOLVED] Switching from Intel integrated graphics to Nvidia

Don't grep for random stuff.

Did you disable the GPU in your BIOS settings?
Please post your complete system journal for the boot: 

sudo journalctl -b | curl -F 'file=@-' 0x0.st

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#5 2023-09-23 07:11:34

asdl0
Member
Registered: 2023-09-21
Posts: 12

Re: [SOLVED] Switching from Intel integrated graphics to Nvidia

Here is the output of sudo journalctl -b | curl -F 'file=@-' 0x0.st
http://0x0.st/HOFh.txt

Also there is no options in my BIOS regarding the gpu.

Offline

#6 2023-09-23 07:14:17

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 71,023

Re: [SOLVED] Switching from Intel integrated graphics to Nvidia

Sep 23 16:29:25 wasd kernel: pci 0000:01:00.0: [10de:1c91] type 00 class 0x030000
Sep 23 16:29:25 wasd kernel: pci 0000:01:00.0: reg 0x10: [mem 0xa3000000-0xa3ffffff]
Sep 23 16:29:25 wasd kernel: pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
Sep 23 16:29:25 wasd kernel: pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
Sep 23 16:29:25 wasd kernel: pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
Sep 23 16:29:25 wasd kernel: pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
Sep 23 16:29:25 wasd kernel: pci 0000:01:00.0: Enabling HDA controller
Sep 23 16:29:25 wasd kernel: pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300
Sep 23 16:29:25 wasd kernel: pci 0000:01:00.1: reg 0x10: [mem 0xa4000000-0xa4003fff]
Sep 23 16:29:25 wasd kernel: pci 0000:01:00.0: vgaarb: bridge control possible
Sep 23 16:29:25 wasd kernel: pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
Sep 23 16:29:25 wasd kernel: pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
Sep 23 16:29:25 wasd kernel: pci 0000:01:00.0: BAR 6: assigned [mem 0xa4080000-0xa40fffff pref]
Sep 23 16:29:25 wasd kernel: pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
Sep 23 16:29:25 wasd kernel: pci 0000:01:00.1: D0 power state depends on 0000:01:00.0

but no trace of either nvidia nor nouveau
Forgot to install nvidia-lts?

pacman -Qs nvidia

Also enable https://wiki.archlinux.org/title/NVIDIA … de_setting

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2023-09-23 07:16:29

asdl0
Member
Registered: 2023-09-21
Posts: 12

Re: [SOLVED] Switching from Intel integrated graphics to Nvidia

Here is the result of pacman -Qs nvidia:

local/egl-wayland 2:1.1.12-1
    EGLStream-based Wayland external platform
local/envycontrol 3.3.0-1
    CLI tool for Nvidia Optimus graphics mode switching on Linux
local/libvdpau 1.5-2
    Nvidia VDPAU library
local/nvidia 535.104.05-7
    
local/nvidia-utils 535.104.05-1
    NVIDIA drivers utilities

Last edited by asdl0 (2023-09-23 07:34:18)

Offline

#8 2023-09-23 07:26:09

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 71,023

Re: [SOLVED] Switching from Intel integrated graphics to Nvidia

Please use [code][/code] tags. Edit your post in this regard.
Also read the output, I predicted the problem, so fix that.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#9 2023-09-23 09:18:18

asdl0
Member
Registered: 2023-09-21
Posts: 12

Re: [SOLVED] Switching from Intel integrated graphics to Nvidia

Now that I've installed nvidia-lts and enabled drm I used envycontrol to switch from integrated graphics to nvidia which worked fine and told me to reboot but once I did it still says my OpenGL renderer is the intel mesa graphics, is there something I did wrong?

Last edited by asdl0 (2023-09-23 10:42:43)

Offline

#10 2023-09-23 14:02:48

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 71,023

Re: [SOLVED] Switching from Intel integrated graphics to Nvidia

told me to … it still says

Please don't paraphrase, https://bbs.archlinux.org/viewtopic.php?id=57855
Please post your complete system journal for the boot: 

sudo journalctl -b | curl -F 'file=@-' 0x0.st

Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#11 2023-09-24 00:25:49

asdl0
Member
Registered: 2023-09-21
Posts: 12

Re: [SOLVED] Switching from Intel integrated graphics to Nvidia

Output of 

sudo journalctl -b | curl -F 'file=@-' 0x0.st

http://0x0.st/HVo1.txt

Also here is my xorg log:

 [     5.959] (--) Log file renamed from "/var/log/Xorg.pid-647.log" to "/var/log/Xorg.0.log"
[     5.961] 
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[     5.961] Current Operating System: Linux wasd 6.1.54-1-lts #1 SMP PREEMPT_DYNAMIC Tue, 19 Sep 2023 10:52:23 +0000 x86_64
[     5.961] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=73269906-c148-4349-90f5-45d56ab6b983 rw rootfstype=ext4 loglevel=3 quiet
[     5.961]  
[     5.961] Current version of pixman: 0.42.2
[     5.961] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     5.961] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.961] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 24 10:08:59 2023
[     5.962] (==) Using config file: "/etc/X11/xorg.conf"
[     5.962] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     5.962] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.963] (==) ServerLayout "layout"
[     5.963] (**) |-->Screen "nvidia" (0)
[     5.963] (**) |   |-->Monitor "<default monitor>"
[     5.963] (**) |   |-->Device "nvidia"
[     5.963] (**) |   |-->GPUDevice "intel"
[     5.963] (==) No monitor specified for screen "nvidia".
	Using a default monitor configuration.
[     5.963] (**) |-->Inactive Device "intel"
[     5.963] (==) Automatically adding devices
[     5.963] (==) Automatically enabling devices
[     5.963] (==) Automatically adding GPU devices
[     5.963] (==) Automatically binding GPU devices
[     5.963] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.963] (WW) The directory "/usr/share/fonts/misc" does not exist.
[     5.963] 	Entry deleted from font path.
[     5.964] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[     5.964] 	Entry deleted from font path.
[     5.964] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[     5.964] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     5.964] 	Entry deleted from font path.
[     5.964] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     5.964] 	Entry deleted from font path.
[     5.964] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[     5.964] 	Entry deleted from font path.
[     5.964] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[     5.964] 	Entry deleted from font path.
[     5.964] (==) FontPath set to:
 
[     5.964] (==) ModulePath set to "/usr/lib/xorg/modules"
[     5.964] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.964] (II) Module ABI versions:
[     5.964] 	X.Org ANSI C Emulation: 0.4
[     5.964] 	X.Org Video Driver: 25.2
[     5.964] 	X.Org XInput driver : 24.4
[     5.964] 	X.Org Server Extension : 10.0
[     5.964] (++) using VT number 2
 
[     5.964] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     5.965] (II) xfree86: Adding drm device (/dev/dri/card1)
[     5.965] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[     5.972] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.972] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[     5.979] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[     5.979] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[     5.979] (**) OutputClass "nvidia" setting /dev/dri/card1 as PrimaryGPU
[     5.980] (--) PCI: (0@0:2:0) 8086:3e9b:1025:1331 rev 0, Mem @ 0xa2000000/16777216, 0xb0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[     5.980] (--) PCI:*(1@0:0:0) 10de:1c91:1025:1332 rev 161, Mem @ 0xa3000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[     5.980] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     5.980] (II) LoadModule: "glx"
[     5.981] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.987] (II) Module glx: vendor="X.Org Foundation"
[     5.987] 	compiled for 1.21.1.8, module version = 1.0.0
[     5.987] 	ABI class: X.Org Server Extension, version 10.0
[     5.987] (II) LoadModule: "nvidia"
[     5.987] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     5.990] (II) Module nvidia: vendor="NVIDIA Corporation"
[     5.990] 	compiled for 1.6.99.901, module version = 1.0.0
[     5.990] 	Module class: X.Org Video Driver
[     5.990] (II) LoadModule: "modesetting"
[     5.990] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     5.992] (II) Module modesetting: vendor="X.Org Foundation"
[     5.992] 	compiled for 1.21.1.8, module version = 1.21.1
[     5.992] 	Module class: X.Org Video Driver
[     5.992] 	ABI class: X.Org Video Driver, version 25.2
[     5.992] (II) NVIDIA dlloader X Driver  535.104.05  Sat Aug 19 01:01:11 UTC 2023
[     5.992] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     5.993] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     5.997] (II) Loading sub module "fb"
[     5.997] (II) LoadModule: "fb"
[     5.997] (II) Module "fb" already built-in
[     5.997] (II) Loading sub module "wfb"
[     5.997] (II) LoadModule: "wfb"
[     5.997] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     5.997] (II) Module wfb: vendor="X.Org Foundation"
[     5.997] 	compiled for 1.21.1.8, module version = 1.0.0
[     5.997] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.998] (WW) Falling back to old probe method for modesetting
[     6.045] (II) modeset(G0): using drv /dev/dri/card0
[     6.045] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"nvidia" for depth/fbbpp 24/32
[     6.045] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[     6.045] (==) NVIDIA(0): RGB weight 888
[     6.045] (==) NVIDIA(0): Default visual is TrueColor
[     6.045] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     6.045] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[     6.045] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[     6.045] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[     6.045] (**) NVIDIA(0): Enabling 2D acceleration
[     6.045] (II) Loading sub module "glxserver_nvidia"
[     6.045] (II) LoadModule: "glxserver_nvidia"
[     6.045] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[     6.087] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[     6.087] 	compiled for 1.6.99.901, module version = 1.0.0
[     6.087] 	Module class: X.Org Server Extension
[     6.087] (II) NVIDIA GLX Module  535.104.05  Sat Aug 19 01:06:04 UTC 2023
[     6.088] (II) NVIDIA: The X server supports PRIME Render Offload.
[     6.089] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[     6.089] (--) NVIDIA(0):     DFP-0
[     6.096] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce GTX 1050 (GP107-A) at PCI:1:0:0
[     6.096] (II) NVIDIA(0):     (GPU-0)
[     6.096] (--) NVIDIA(0): Memory: 3145728 kBytes
[     6.096] (--) NVIDIA(0): VideoBIOS: 86.07.6c.00.12
[     6.096] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     6.096] (--) NVIDIA(GPU-0): DFP-0: disconnected
[     6.096] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[     6.096] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[     6.096] (--) NVIDIA(GPU-0): 
[     6.096] (==) NVIDIA(0): 
[     6.096] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[     6.096] (==) NVIDIA(0):     will be used as the requested mode.
[     6.096] (==) NVIDIA(0): 
[     6.096] (--) NVIDIA(0): No enabled display devices found; starting anyway because
[     6.096] (--) NVIDIA(0):     AllowEmptyInitialConfiguration is enabled
[     6.097] (II) NVIDIA(0): Validated MetaModes:
[     6.097] (II) NVIDIA(0):     "NULL"
[     6.097] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[     6.097] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[     6.097] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[     6.097] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[     6.097] (==) modeset(G0): RGB weight 888
[     6.097] (==) modeset(G0): Default visual is TrueColor
[     6.097] (II) Loading sub module "glamoregl"
[     6.097] (II) LoadModule: "glamoregl"
[     6.097] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     6.108] (II) Module glamoregl: vendor="X.Org Foundation"
[     6.108] 	compiled for 1.21.1.8, module version = 1.0.1
[     6.108] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     6.298] (II) modeset(G0): glamor X acceleration enabled on Mesa Intel(R) UHD Graphics 630 (CFL GT2)
[     6.298] (II) modeset(G0): glamor initialized
[     6.300] (II) modeset(G0): Output eDP-1-1 has no monitor section
[     6.303] (II) modeset(G0): EDID for output eDP-1-1
[     6.303] (II) modeset(G0): Manufacturer: LGD  Model: 62e  Serial#: 0
[     6.303] (II) modeset(G0): Year: 2019  Week: 0
[     6.303] (II) modeset(G0): EDID Version: 1.4
[     6.303] (II) modeset(G0): Digital Display Input
[     6.303] (II) modeset(G0): 6 bits per channel
[     6.303] (II) modeset(G0): Digital interface is DisplayPort
[     6.303] (II) modeset(G0): Max Image Size [cm]: horiz.: 34  vert.: 19
[     6.303] (II) modeset(G0): Gamma: 2.20
[     6.303] (II) modeset(G0): No DPMS capabilities specified
[     6.303] (II) modeset(G0): Supported color encodings: RGB 4:4:4 
[     6.303] (II) modeset(G0): First detailed timing is preferred mode
[     6.303] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[     6.303] (II) modeset(G0): Display is continuous-frequency
[     6.303] (II) modeset(G0): redX: 0.590 redY: 0.370   greenX: 0.350 greenY: 0.555
[     6.303] (II) modeset(G0): blueX: 0.155 blueY: 0.110   whiteX: 0.313 whiteY: 0.329
[     6.303] (II) modeset(G0): Manufacturer's mask: 0
[     6.303] (II) modeset(G0): Supported detailed timing:
[     6.303] (II) modeset(G0): clock: 138.6 MHz   Image Size:  344 x 194 mm
[     6.303] (II) modeset(G0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[     6.303] (II) modeset(G0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
[     6.303] (II) modeset(G0): Supported detailed timing:
[     6.303] (II) modeset(G0): clock: 92.4 MHz   Image Size:  344 x 194 mm
[     6.303] (II) modeset(G0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[     6.303] (II) modeset(G0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
[     6.303] (II) modeset(G0): Unknown vendor-specific block 2
[     6.303] (II) modeset(G0): EDID (in hex):
[     6.303] (II) modeset(G0): 	00ffffffffffff0030e42e0600000000
[     6.303] (II) modeset(G0): 	001d0104952213780338d5975e598e27
[     6.303] (II) modeset(G0): 	1c505400000001010101010101010101
[     6.303] (II) modeset(G0): 	010101010101243680a070381f403020
[     6.303] (II) modeset(G0): 	350058c210000019182480a070381f40
[     6.303] (II) modeset(G0): 	3020350058c210000019000000000000
[     6.303] (II) modeset(G0): 	00000000000000000000000000000002
[     6.303] (II) modeset(G0): 	000c3aff0a3c7d1314267d000000002f
[     6.303] (II) modeset(G0): Printing probed modes for output eDP-1-1
[     6.303] (II) modeset(G0): Modeline "1920x1080"x60.0  138.60  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[     6.303] (II) modeset(G0): Modeline "1920x1080"x119.9  266.50  1920 1944 1960 2000  1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[     6.303] (II) modeset(G0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[     6.303] (II) modeset(G0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[     6.303] (II) modeset(G0): Modeline "1920x1080"x40.0   92.40  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (44.4 kHz e)
[     6.303] (II) modeset(G0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[     6.304] (II) modeset(G0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[     6.304] (II) modeset(G0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[     6.304] (II) modeset(G0): Modeline "1600x900"x120.0  246.00  1600 1728 1900 2200  900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[     6.304] (II) modeset(G0): Modeline "1600x900"x119.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[     6.304] (II) modeset(G0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[     6.304] (II) modeset(G0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[     6.304] (II) modeset(G0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[     6.304] (II) modeset(G0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[     6.304] (II) modeset(G0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[     6.304] (II) modeset(G0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[     6.304] (II) modeset(G0): Modeline "1440x810"x120.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[     6.304] (II) modeset(G0): Modeline "1440x810"x119.9  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[     6.304] (II) modeset(G0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[     6.304] (II) modeset(G0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[     6.304] (II) modeset(G0): Modeline "1280x800"x120.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[     6.304] (II) modeset(G0): Modeline "1280x800"x119.9  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[     6.304] (II) modeset(G0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[     6.304] (II) modeset(G0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[     6.304] (II) modeset(G0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[     6.304] (II) modeset(G0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[     6.304] (II) modeset(G0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[     6.304] (II) modeset(G0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[     6.304] (II) modeset(G0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[     6.304] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[     6.304] (II) modeset(G0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[     6.304] (II) modeset(G0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[     6.304] (II) modeset(G0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[     6.304] (II) modeset(G0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[     6.304] (II) modeset(G0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[     6.304] (II) modeset(G0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[     6.304] (II) modeset(G0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[     6.304] (II) modeset(G0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[     6.304] (II) modeset(G0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[     6.304] (II) modeset(G0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[     6.304] (II) modeset(G0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[     6.304] (II) modeset(G0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[     6.304] (II) modeset(G0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[     6.304] (II) modeset(G0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[     6.304] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[     6.304] (II) modeset(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[     6.304] (II) modeset(G0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[     6.304] (II) modeset(G0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[     6.304] (II) modeset(G0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[     6.304] (II) modeset(G0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[     6.304] (II) modeset(G0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[     6.304] (II) modeset(G0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[     6.304] (II) modeset(G0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[     6.304] (II) modeset(G0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[     6.304] (II) modeset(G0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[     6.304] (II) modeset(G0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[     6.304] (II) modeset(G0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[     6.304] (II) modeset(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[     6.304] (II) modeset(G0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[     6.304] (II) modeset(G0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[     6.304] (II) modeset(G0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[     6.304] (II) modeset(G0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[     6.304] (II) modeset(G0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[     6.304] (II) modeset(G0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[     6.304] (II) modeset(G0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[     6.304] (II) modeset(G0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[     6.304] (II) modeset(G0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[     6.304] (II) modeset(G0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[     6.304] (II) modeset(G0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[     6.304] (II) modeset(G0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[     6.304] (II) modeset(G0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[     6.304] (II) modeset(G0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[     6.304] (II) modeset(G0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[     6.304] (II) modeset(G0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[     6.304] (II) modeset(G0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[     6.304] (II) modeset(G0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[     6.304] (II) modeset(G0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[     6.304] (II) modeset(G0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[     6.304] (II) modeset(G0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[     6.304] (II) modeset(G0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[     6.304] (II) modeset(G0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[     6.304] (II) modeset(G0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[     6.304] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[     6.304] (==) modeset(G0): DPI set to (96, 96)
[     6.304] (II) Loading sub module "fb"
[     6.304] (II) LoadModule: "fb"
[     6.304] (II) Module "fb" already built-in
[     6.305] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[     6.305] (II) NVIDIA:     access.
[     6.309] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[     6.309] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[     6.309] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[     6.309] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[     6.309] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[     6.309] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[     6.310] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[     6.310] (II) NVIDIA(0):     Config Options in the README.
[     6.330] (II) NVIDIA(0): Setting mode "NULL"
[     6.335] (==) NVIDIA(0): Disabling shared memory pixmaps
[     6.335] (==) NVIDIA(0): Backing store enabled
[     6.335] (==) NVIDIA(0): Silken mouse enabled
[     6.335] (==) NVIDIA(0): DPMS enabled
[     6.336] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[     6.336] (II) Loading sub module "dri2"
[     6.336] (II) LoadModule: "dri2"
[     6.336] (II) Module "dri2" already built-in
[     6.336] (II) NVIDIA(0): [DRI2] Setup complete
[     6.336] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     6.351] (==) modeset(G0): Backing store enabled
[     6.351] (==) modeset(G0): Silken mouse enabled
[     6.429] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[     6.429] (==) modeset(G0): DPMS enabled
[     6.429] (WW) modeset(G0): Option "AllowEmptyInitialConfiguration" is not used
[     6.429] (II) modeset(G0): [DRI2] Setup complete
[     6.429] (II) modeset(G0): [DRI2]   DRI driver: iris
[     6.429] (II) modeset(G0): [DRI2]   VDPAU driver: va_gl
[     6.429] (II) modeset(G0): Disable reverse prime offload mode for i915.
[     6.429] (II) Initializing extension Generic Event Extension
[     6.429] (II) Initializing extension SHAPE
[     6.430] (II) Initializing extension MIT-SHM
[     6.430] (II) Initializing extension XInputExtension
[     6.430] (II) Initializing extension XTEST
[     6.431] (II) Initializing extension BIG-REQUESTS
[     6.431] (II) Initializing extension SYNC
[     6.431] (II) Initializing extension XKEYBOARD
[     6.432] (II) Initializing extension XC-MISC
[     6.432] (II) Initializing extension SECURITY
[     6.432] (II) Initializing extension XFIXES
[     6.432] (II) Initializing extension RENDER
[     6.433] (II) Initializing extension RANDR
[     6.433] (II) Initializing extension COMPOSITE
[     6.434] (II) Initializing extension DAMAGE
[     6.434] (II) Initializing extension MIT-SCREEN-SAVER
[     6.434] (II) Initializing extension DOUBLE-BUFFER
[     6.434] (II) Initializing extension RECORD
[     6.435] (II) Initializing extension DPMS
[     6.435] (II) Initializing extension Present
[     6.435] (II) Initializing extension DRI3
[     6.435] (II) Initializing extension X-Resource
[     6.436] (II) Initializing extension XVideo
[     6.436] (II) Initializing extension XVideo-MotionCompensation
[     6.436] (II) Initializing extension GLX
[     6.436] (II) Initializing extension GLX
[     6.436] (II) Indirect GLX disabled.
[     6.437] (II) GLX: Another vendor is already registered for screen 0
[     6.437] (II) Initializing extension XFree86-VidModeExtension
[     6.437] (II) Initializing extension XFree86-DGA
[     6.437] (II) Initializing extension XFree86-DRI
[     6.437] (II) Initializing extension DRI2
[     6.437] (II) Initializing extension NV-GLX
[     6.438] (II) Initializing extension NV-CONTROL
[     6.701] (II) modeset(G0): Damage tracking initialized
[     6.759] (II) config/udev: Adding input device Acer Wireless Radio Control (/dev/input/event5)
[     6.759] (**) Acer Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[     6.759] (**) Acer Wireless Radio Control: Applying InputClass "system-keyboard"
[     6.759] (II) LoadModule: "libinput"
[     6.759] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     6.762] (II) Module libinput: vendor="X.Org Foundation"
[     6.762] 	compiled for 1.21.1.8, module version = 1.4.0
[     6.762] 	Module class: X.Org XInput Driver
[     6.762] 	ABI class: X.Org XInput driver, version 24.4
[     6.762] (II) Using input driver 'libinput' for 'Acer Wireless Radio Control'
[     6.762] (**) Acer Wireless Radio Control: always reports core events
[     6.762] (**) Option "Device" "/dev/input/event5"
[     6.766] (II) event5  - Acer Wireless Radio Control: is tagged by udev as: Keyboard
[     6.766] (II) event5  - Acer Wireless Radio Control: device is a keyboard
[     6.766] (II) event5  - Acer Wireless Radio Control: device removed
[     6.823] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/10251229:00/input/input5/event5"
[     6.823] (II) XINPUT: Adding extended input device "Acer Wireless Radio Control" (type: KEYBOARD, id 6)
[     6.823] (**) Option "xkb_model" "pc105+inet"
[     6.823] (**) Option "xkb_layout" "us"
[     6.823] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     6.870] (II) event5  - Acer Wireless Radio Control: is tagged by udev as: Keyboard
[     6.870] (II) event5  - Acer Wireless Radio Control: device is a keyboard
[     6.870] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     6.870] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.870] (**) Power Button: Applying InputClass "system-keyboard"
[     6.870] (II) Using input driver 'libinput' for 'Power Button'
[     6.870] (**) Power Button: always reports core events
[     6.870] (**) Option "Device" "/dev/input/event3"
[     6.871] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     6.872] (II) event3  - Power Button: device is a keyboard
[     6.872] (II) event3  - Power Button: device removed
[     6.890] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[     6.890] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     6.890] (**) Option "xkb_model" "pc105+inet"
[     6.890] (**) Option "xkb_layout" "us"
[     6.890] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     6.891] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     6.891] (II) event3  - Power Button: device is a keyboard
[     6.892] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[     6.892] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     6.892] (**) Video Bus: Applying InputClass "system-keyboard"
[     6.892] (II) Using input driver 'libinput' for 'Video Bus'
[     6.892] (**) Video Bus: always reports core events
[     6.892] (**) Option "Device" "/dev/input/event14"
[     6.893] (II) event14 - Video Bus: is tagged by udev as: Keyboard
[     6.893] (II) event14 - Video Bus: device is a keyboard
[     6.894] (II) event14 - Video Bus: device removed
[     6.936] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14/event14"
[     6.936] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     6.936] (**) Option "xkb_model" "pc105+inet"
[     6.936] (**) Option "xkb_layout" "us"
[     6.937] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     6.940] (II) event14 - Video Bus: is tagged by udev as: Keyboard
[     6.940] (II) event14 - Video Bus: device is a keyboard
[     6.943] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[     6.943] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     6.943] (**) Video Bus: Applying InputClass "system-keyboard"
[     6.943] (II) Using input driver 'libinput' for 'Video Bus'
[     6.943] (**) Video Bus: always reports core events
[     6.943] (**) Option "Device" "/dev/input/event13"
[     6.946] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[     6.946] (II) event13 - Video Bus: device is a keyboard
[     6.947] (II) event13 - Video Bus: device removed
[     6.990] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input13/event13"
[     6.990] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[     6.990] (**) Option "xkb_model" "pc105+inet"
[     6.990] (**) Option "xkb_layout" "us"
[     6.990] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     6.994] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[     6.994] (II) event13 - Video Bus: device is a keyboard
[     6.997] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     6.997] (II) No input driver specified, ignoring this device.
[     6.997] (II) This device may have been added with another device file.
[     6.999] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     6.999] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.999] (**) Power Button: Applying InputClass "system-keyboard"
[     6.999] (II) Using input driver 'libinput' for 'Power Button'
[     6.999] (**) Power Button: always reports core events
[     6.999] (**) Option "Device" "/dev/input/event2"
[     7.001] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     7.002] (II) event2  - Power Button: device is a keyboard
[     7.002] (II) event2  - Power Button: device removed
[     7.026] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[     7.026] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
[     7.026] (**) Option "xkb_model" "pc105+inet"
[     7.027] (**) Option "xkb_layout" "us"
[     7.027] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     7.029] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     7.030] (II) event2  - Power Button: device is a keyboard
[     7.032] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[     7.032] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     7.032] (**) Sleep Button: Applying InputClass "system-keyboard"
[     7.032] (II) Using input driver 'libinput' for 'Sleep Button'
[     7.032] (**) Sleep Button: always reports core events
[     7.032] (**) Option "Device" "/dev/input/event1"
[     7.034] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[     7.034] (II) event1  - Sleep Button: device is a keyboard
[     7.035] (II) event1  - Sleep Button: device removed
[     7.056] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[     7.057] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 11)
[     7.057] (**) Option "xkb_model" "pc105+inet"
[     7.057] (**) Option "xkb_layout" "us"
[     7.057] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     7.060] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[     7.060] (II) event1  - Sleep Button: device is a keyboard
[     7.062] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event10)
[     7.062] (II) No input driver specified, ignoring this device.
[     7.062] (II) This device may have been added with another device file.
[     7.063] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event11)
[     7.063] (II) No input driver specified, ignoring this device.
[     7.064] (II) This device may have been added with another device file.
[     7.065] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
[     7.065] (II) No input driver specified, ignoring this device.
[     7.065] (II) This device may have been added with another device file.
[     7.066] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event9)
[     7.066] (II) No input driver specified, ignoring this device.
[     7.066] (II) This device may have been added with another device file.
[     7.069] (II) config/udev: Adding input device HD WebCam: HD WebCam (/dev/input/event7)
[     7.069] (**) HD WebCam: HD WebCam: Applying InputClass "libinput keyboard catchall"
[     7.069] (**) HD WebCam: HD WebCam: Applying InputClass "system-keyboard"
[     7.069] (II) Using input driver 'libinput' for 'HD WebCam: HD WebCam'
[     7.069] (**) HD WebCam: HD WebCam: always reports core events
[     7.069] (**) Option "Device" "/dev/input/event7"
[     7.073] (II) event7  - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[     7.073] (II) event7  - HD WebCam: HD WebCam: device is a keyboard
[     7.074] (II) event7  - HD WebCam: HD WebCam: device removed
[     7.120] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input7/event7"
[     7.120] (II) XINPUT: Adding extended input device "HD WebCam: HD WebCam" (type: KEYBOARD, id 12)
[     7.120] (**) Option "xkb_model" "pc105+inet"
[     7.120] (**) Option "xkb_layout" "us"
[     7.120] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     7.124] (II) event7  - HD WebCam: HD WebCam: is tagged by udev as: Keyboard
[     7.124] (II) event7  - HD WebCam: HD WebCam: device is a keyboard
[     7.126] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[     7.127] (II) No input driver specified, ignoring this device.
[     7.127] (II) This device may have been added with another device file.
[     7.128] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[     7.128] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     7.129] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[     7.129] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     7.129] (**) AT Translated Set 2 keyboard: always reports core events
[     7.129] (**) Option "Device" "/dev/input/event4"
[     7.131] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     7.132] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[     7.134] (II) event4  - AT Translated Set 2 keyboard: device removed
[     7.156] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[     7.157] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[     7.157] (**) Option "xkb_model" "pc105+inet"
[     7.157] (**) Option "xkb_layout" "us"
[     7.157] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     7.160] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     7.161] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[     7.164] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[     7.164] (II) No input driver specified, ignoring this device.
[     7.164] (II) This device may have been added with another device file.
[     7.173] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event8)
[     7.173] (**) Acer WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     7.173] (**) Acer WMI hotkeys: Applying InputClass "system-keyboard"
[     7.173] (II) Using input driver 'libinput' for 'Acer WMI hotkeys'
[     7.173] (**) Acer WMI hotkeys: always reports core events
[     7.173] (**) Option "Device" "/dev/input/event8"
[     7.175] (II) event8  - Acer WMI hotkeys: is tagged by udev as: Keyboard
[     7.175] (II) event8  - Acer WMI hotkeys: device is a keyboard
[     7.175] (II) event8  - Acer WMI hotkeys: device removed
[     7.197] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
[     7.197] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 14)
[     7.197] (**) Option "xkb_model" "pc105+inet"
[     7.197] (**) Option "xkb_layout" "us"
[     7.197] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     7.199] (II) event8  - Acer WMI hotkeys: is tagged by udev as: Keyboard
[     7.199] (II) event8  - Acer WMI hotkeys: device is a keyboard
[     7.247] (--) NVIDIA(GPU-0): DFP-0: disconnected
[     7.247] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[     7.247] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[     7.247] (--) NVIDIA(GPU-0): 
[    13.735] (II) event5  - Acer Wireless Radio Control: device removed
[    13.783] (II) event3  - Power Button: device removed
[    13.803] (II) event14 - Video Bus: device removed
[    13.836] (II) event13 - Video Bus: device removed
[    13.870] (II) event2  - Power Button: device removed
[    13.886] (II) event1  - Sleep Button: device removed
[    13.903] (II) event7  - HD WebCam: HD WebCam: device removed
[    13.936] (II) event4  - AT Translated Set 2 keyboard: device removed
[    13.953] (II) event8  - Acer WMI hotkeys: device removed
[    17.751] (II) config/udev: Adding input device WH-CH700N (AVRCP) (/dev/input/event16)
[    17.751] (**) WH-CH700N (AVRCP): Applying InputClass "libinput keyboard catchall"
[    17.751] (**) WH-CH700N (AVRCP): Applying InputClass "system-keyboard"
[    17.751] (II) Using input driver 'libinput' for 'WH-CH700N (AVRCP)'
[    17.751] (**) WH-CH700N (AVRCP): always reports core events
[    17.751] (**) Option "Device" "/dev/input/event16"
[    17.753] (II) event16 - WH-CH700N (AVRCP): is tagged by udev as: Keyboard
[    17.753] (II) event16 - WH-CH700N (AVRCP): device is a keyboard
[    17.753] (II) event16 - WH-CH700N (AVRCP): device removed
[    17.783] (**) Option "config_info" "udev:/sys/devices/virtual/input/input16/event16"
[    17.783] (II) XINPUT: Adding extended input device "WH-CH700N (AVRCP)" (type: KEYBOARD, id 15)
[    17.783] (**) Option "xkb_model" "pc105+inet"
[    17.783] (**) Option "xkb_layout" "us"
[    17.783] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    18.140] (II) config/udev: Adding input device Bluetooth Mouse M336/M337/M535 Consumer Control (/dev/input/event18)
[    18.141] (**) Bluetooth Mouse M336/M337/M535 Consumer Control: Applying InputClass "libinput keyboard catchall"
[    18.141] (**) Bluetooth Mouse M336/M337/M535 Consumer Control: Applying InputClass "system-keyboard"
[    18.141] (II) Using input driver 'libinput' for 'Bluetooth Mouse M336/M337/M535 Consumer Control'
[    18.141] (**) Bluetooth Mouse M336/M337/M535 Consumer Control: always reports core events
[    18.141] (**) Option "Device" "/dev/input/event18"
[    18.144] (II) event18 - Bluetooth Mouse M336/M337/M535 Consumer Control: is tagged by udev as: Keyboard
[    18.144] (II) event18 - Bluetooth Mouse M336/M337/M535 Consumer Control: device is a keyboard
[    18.145] (II) event18 - Bluetooth Mouse M336/M337/M535 Consumer Control: device removed
[    18.163] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/bluetooth/hci0/hci0:512/0005:046D:B016.0001/input/input18/event18"
[    18.163] (II) XINPUT: Adding extended input device "Bluetooth Mouse M336/M337/M535 Consumer Control" (type: KEYBOARD, id 16)
[    18.163] (**) Option "xkb_model" "pc105+inet"
[    18.163] (**) Option "xkb_layout" "us"
[    18.163] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    18.165] (II) config/udev: Adding input device Bluetooth Mouse M336/M337/M535 Keyboard (/dev/input/event19)
[    18.165] (**) Bluetooth Mouse M336/M337/M535 Keyboard: Applying InputClass "libinput keyboard catchall"
[    18.165] (**) Bluetooth Mouse M336/M337/M535 Keyboard: Applying InputClass "system-keyboard"
[    18.165] (II) Using input driver 'libinput' for 'Bluetooth Mouse M336/M337/M535 Keyboard'
[    18.165] (**) Bluetooth Mouse M336/M337/M535 Keyboard: always reports core events
[    18.165] (**) Option "Device" "/dev/input/event19"
[    18.168] (II) event19 - Bluetooth Mouse M336/M337/M535 Keyboard: is tagged by udev as: Keyboard
[    18.168] (II) event19 - Bluetooth Mouse M336/M337/M535 Keyboard: device is a keyboard
[    18.169] (II) event19 - Bluetooth Mouse M336/M337/M535 Keyboard: device removed
[    18.190] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/bluetooth/hci0/hci0:512/0005:046D:B016.0001/input/input21/event19"
[    18.190] (II) XINPUT: Adding extended input device "Bluetooth Mouse M336/M337/M535 Keyboard" (type: KEYBOARD, id 17)
[    18.190] (**) Option "xkb_model" "pc105+inet"
[    18.190] (**) Option "xkb_layout" "us"
[    18.190] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    18.192] (II) config/udev: Adding input device Bluetooth Mouse M336/M337/M535 Mouse (/dev/input/event17)
[    18.192] (**) Bluetooth Mouse M336/M337/M535 Mouse: Applying InputClass "libinput pointer catchall"
[    18.192] (II) Using input driver 'libinput' for 'Bluetooth Mouse M336/M337/M535 Mouse'
[    18.192] (**) Bluetooth Mouse M336/M337/M535 Mouse: always reports core events
[    18.192] (**) Option "Device" "/dev/input/event17"
[    18.195] (II) event17 - Bluetooth Mouse M336/M337/M535 Mouse: is tagged by udev as: Mouse
[    18.196] (II) event17 - Bluetooth Mouse M336/M337/M535 Mouse: device is a pointer
[    18.196] (II) event17 - Bluetooth Mouse M336/M337/M535 Mouse: device removed
[    18.233] (II) libinput: Bluetooth Mouse M336/M337/M535 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    18.233] (II) libinput: Bluetooth Mouse M336/M337/M535 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    18.233] (II) libinput: Bluetooth Mouse M336/M337/M535 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    18.233] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/bluetooth/hci0/hci0:512/0005:046D:B016.0001/input/input17/event17"
[    18.233] (II) XINPUT: Adding extended input device "Bluetooth Mouse M336/M337/M535 Mouse" (type: MOUSE, id 18)
[    18.233] (**) Option "AccelerationScheme" "none"
[    18.233] (**) Bluetooth Mouse M336/M337/M535 Mouse: (accel) selected scheme none/0
[    18.233] (**) Bluetooth Mouse M336/M337/M535 Mouse: (accel) acceleration factor: 2.000
[    18.233] (**) Bluetooth Mouse M336/M337/M535 Mouse: (accel) acceleration threshold: 4
[    18.235] (II) config/udev: Adding input device Bluetooth Mouse M336/M337/M535 Mouse (/dev/input/mouse0)
[    18.235] (II) No input driver specified, ignoring this device.
[    18.235] (II) This device may have been added with another device file.

Last edited by asdl0 (2023-09-24 00:45:49)

Offline

#12 2023-09-24 06:25:49

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 71,023

Re: [SOLVED] Switching from Intel integrated graphics to Nvidia

[     5.963] (==) ServerLayout "layout"
[     5.963] (**) |-->Screen "nvidia" (0)
[     5.963] (**) |   |-->Monitor "<default monitor>"
[     5.963] (**) |   |-->Device "nvidia"
[     5.963] (**) |   |-->GPUDevice "intel"
[     5.963] (==) No monitor specified for screen "nvidia".
	Using a default monitor configuration.
[     5.963] (**) |-->Inactive Device "intel"

You've configured the system for the nvidia GPU to be the primary one.

I did it still says my OpenGL renderer is the intel mesa graphics

What said where and how?

glxinfo -B

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#13 2023-09-24 06:28:41

asdl0
Member
Registered: 2023-09-21
Posts: 12

Re: [SOLVED] Switching from Intel integrated graphics to Nvidia

It says its my OpenGL renderer when I look in system settings and when I put in 

 glxinfo | grep "OpenGL renderer"

Here is the output of 

 glxinfo -B 
 name of display: :1
display: :1  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: Intel (0x8086)
    Device: Mesa Intel(R) UHD Graphics 630 (CFL GT2) (0x3e9b)
    Version: 23.1.8
    Accelerated: yes
    Video memory: 15833MB
    Unified memory: yes
    Preferred profile: core (0x1)
    Max core profile version: 4.6
    Max compat profile version: 4.6
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.2
OpenGL vendor string: Intel
OpenGL renderer string: Mesa Intel(R) UHD Graphics 630 (CFL GT2)
OpenGL core profile version string: 4.6 (Core Profile) Mesa 23.1.8-arch1.1
OpenGL core profile shading language version string: 4.60
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 4.6 (Compatibility Profile) Mesa 23.1.8-arch1.1
OpenGL shading language version string: 4.60
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile

OpenGL ES profile version string: OpenGL ES 3.2 Mesa 23.1.8-arch1.1
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20

Offline

#14 2023-09-24 06:34:20

asdl0
Member
Registered: 2023-09-21
Posts: 12

Re: [SOLVED] Switching from Intel integrated graphics to Nvidia

seth wrote:
[     5.963] (==) ServerLayout "layout"
[     5.963] (**) |-->Screen "nvidia" (0)
[     5.963] (**) |   |-->Monitor "<default monitor>"
[     5.963] (**) |   |-->Device "nvidia"
[     5.963] (**) |   |-->GPUDevice "intel"
[     5.963] (==) No monitor specified for screen "nvidia".
	Using a default monitor configuration.
[     5.963] (**) |-->Inactive Device "intel"

You've configured the system for the nvidia GPU to be the primary one.

It also says that my gpu device is intel nor do I have a monitor specified for nvidia.

Last edited by asdl0 (2023-09-24 06:35:35)

Offline

#15 2023-09-24 06:41:11

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 71,023

Re: [SOLVED] Switching from Intel integrated graphics to Nvidia

"name of display: :1"
"/var/log/Xorg.0.log"

That's not the display server from the log you posted?

Sep 24 10:09:07 wasd kwin_wayland[766]: OpenGL vendor string:                   Intel
Sep 24 10:09:07 wasd kwin_wayland[766]: OpenGL renderer string:                 Mesa Intel(R) UHD Graphics 630 (CFL GT2)
Sep 24 10:09:07 wasd kwin_wayland[766]: OpenGL version string:                  4.6 (Core Profile) Mesa 23.1.8-arch1.1
Sep 24 10:09:07 wasd kwin_wayland[766]: OpenGL shading language version string: 4.60
Sep 24 10:09:07 wasd kwin_wayland[766]: Driver:                                 Intel
Sep 24 10:09:07 wasd kwin_wayland[766]: GPU class:                              Coffee Lake
Sep 24 10:09:07 wasd kwin_wayland[766]: OpenGL version:                         4.6
Sep 24 10:09:07 wasd kwin_wayland[766]: GLSL version:                           4.60
Sep 24 10:09:07 wasd kwin_wayland[766]: Mesa version:                           23.1.8
Sep 24 10:09:07 wasd kwin_wayland[766]: Linux kernel version:                   6.1.54
Sep 24 10:09:07 wasd kwin_wayland[766]: Requires strict binding:                no
Sep 24 10:09:07 wasd kwin_wayland[766]: GLSL shaders:                           yes
Sep 24 10:09:07 wasd kwin_wayland[766]: Texture NPOT support:                   yes
Sep 24 10:09:07 wasd kwin_wayland[766]: Virtual Machine:                        no

Also the journal say that this is all irrelevant and envycontrol most like won't work or do anything because you're actually running on wayland.

Since the only outputs seem to be attached to the intel chip, is there any reason you're not just leaving the system alone, run a regular prime setup on the IGP and dynamically invoke the GPU by exporting DRI_PRIME ?
https://wiki.archlinux.org/title/PRIME# … figuration

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#16 2023-09-24 06:46:17

asdl0
Member
Registered: 2023-09-21
Posts: 12

Re: [SOLVED] Switching from Intel integrated graphics to Nvidia

I fixed it all I did was switch from Wayland to X11 and now when I put in 

glxinfo | grep "OpenGL renderer"

it says that I'm on nvidia.

Thank you for your help.

Offline

#17 2023-09-24 06:47:09

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 71,023

Re: [SOLVED] Switching from Intel integrated graphics to Nvidia

Please always remember to mark resolved threads by editing your initial posts subject - so others will know that there's no task left, but maybe a solution to find.
Thanks.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

Pages: 1

Board footer

Powered by FluxBB