headset mic not working (pulseaudio)

Herbalist · 2023-12-03 09:08:53

used to be able to get voice input using my headset with built in microphone on arch, on current clean install, I can't seem to get it to work no matter what I try, whether I plug the headset in front panel connections or from the io shield inputs

setting the profile to analog stereo duplex in pavucontrol config section

I can see the input available but no audio detected

aplay -l

**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [27B2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

pacmd list-cards

1 card(s) available.
    index: 1
    name: <alsa_card.pci-0000_00_1f.3>
    driver: <module-alsa-card.c>
    owner module: 7
    properties:
        alsa.card = "0"
        alsa.card_name = "HDA Intel PCH"
        alsa.long_card_name = "HDA Intel PCH at 0xa2410000 irq 139"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:00:1f.3"
        sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
        device.bus = "pci"
        device.vendor.id = "8086"
        device.vendor.name = "Intel Corporation"
        device.product.id = "a348"
        device.product.name = "Cannon Lake PCH cAVS"
        device.form_factor = "internal"
        device.string = "0"
        device.description = "Built-in Audio"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    profiles:
        input:analog-stereo: Analog Stereo Input (priority 32833, available: unknown)
        output:analog-stereo: Analog Stereo Output (priority 39268, available: unknown)
        output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 39333, available: unknown)
        output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 38668, available: unknown)
        output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 38733, available: unknown)
        output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
        output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (priority 5765, available: unknown)
        output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
        output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2) Output + Analog Stereo Input (priority 665, available: unknown)
        output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
        output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2) Output + Analog Stereo Input (priority 665, available: unknown)
        output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
        output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (priority 5765, available: unknown)
        output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
        output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: unknown)
        output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
        output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: unknown)
        off: Off (priority 0, available: unknown)
    active profile: <output:analog-stereo+input:analog-stereo>
    sinks:
        alsa_output.pci-0000_00_1f.3.analog-stereo/#22: Built-in Audio Analog Stereo
    sources:
        alsa_input.pci-0000_00_1f.3.analog-stereo/#4: Built-in Audio Analog Stereo
        alsa_output.pci-0000_00_1f.3.analog-stereo.monitor/#24: Monitor of Built-in Audio Analog Stereo
    ports:
        analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: yes)
            properties:
                device.icon_name = "audio-input-microphone"
        analog-input-rear-mic: Rear Microphone (priority 8200, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "audio-input-microphone"
        analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
            properties:

        analog-output-lineout: Line Out (priority 9000, latency offset 0 usec, available: no)
            properties:

        analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: yes)
            properties:
                device.icon_name = "audio-headphones"
        hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: yes)
            properties:
                device.icon_name = "video-display"
                device.product.name = "27B2"
        hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "video-display"
        hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "video-display"

pacmd list-sinks

1 sink(s) available.
  * index: 22
    name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 9039
    volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
            balance 0.00
    base volume: 65536 / 100% / 0.00 dB
    volume steps: 65537
    muted: no
    current latency: 0.00 ms
    max request: 0 KiB
    max rewind: 0 KiB
    monitor source: 24
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
                 Stereo
    used by: 0
    linked by: 0
    configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
    card: 1 <alsa_card.pci-0000_00_1f.3>
    module: 7
    properties:
        alsa.resolution_bits = "16"
        device.api = "alsa"
        device.class = "sound"
        alsa.class = "generic"
        alsa.subclass = "generic-mix"
        alsa.name = "ALC887-VD Analog"
        alsa.id = "ALC887-VD Analog"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.device = "0"
        alsa.card = "0"
        alsa.card_name = "HDA Intel PCH"
        alsa.long_card_name = "HDA Intel PCH at 0xa2410000 irq 139"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:00:1f.3"
        sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
        device.bus = "pci"
        device.vendor.id = "8086"
        device.vendor.name = "Intel Corporation"
        device.product.id = "a348"
        device.product.name = "Cannon Lake PCH cAVS"
        device.form_factor = "internal"
        device.string = "front:0"
        device.buffering.buffer_size = "352800"
        device.buffering.fragment_size = "176400"
        device.access_mode = "mmap+timer"
        device.profile.name = "analog-stereo"
        device.profile.description = "Analog Stereo"
        device.description = "Built-in Audio Analog Stereo"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    ports:
        analog-output-lineout: Line Out (priority 9000, latency offset 0 usec, available: no)
            properties:

        analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: yes)
            properties:
                device.icon_name = "audio-headphones"
    active port: <analog-output-headphones>

V1del · 2023-12-03 22:43:16

Since you're talking about the mic

arecord -lL
amixer -c0
pacmd list-sources
#during recording attempt
pacmd list-source-outputs

would be interesting

Herbalist · 2023-12-04 09:18:06

pacmd list-source-outputs during recording attempt

3 source output(s) available.
    index: 0
	driver: <protocol-native.c>
	flags: DONT_MOVE
	state: RUNNING
	source: 0 <alsa_output.usb-FiiO_DigiHug_USB_Audio-01.analog-stereo.monitor>
	volume: mono: 65536 / 100% / 0.00 dB
	        balance 0.00
	muted: no
	current latency: 11.09 ms
	requested latency: 6.94 ms
	sample spec: float32le 1ch 144Hz
	channel map: mono
	             Mono
	resample method: peaks
	owner module: 10
	client: 6 <PulseAudio Volume Control>
	properties:
		media.name = "Peak detect"
		application.name = "PulseAudio Volume Control"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.id = "org.PulseAudio.pavucontrol"
		application.icon_name = "audio-card"
		application.version = "5.0"
		application.process.id = "1148"
		application.process.user = "oz"
		application.process.host = "archbox"
		application.process.binary = "pavucontrol"
		application.language = "C"
		window.x11.display = ":0.0"
		application.process.machine_id = "b3af920d4b184eb6965e99886ee18907"
		application.process.session_id = "2"
		module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
    index: 4
	driver: <protocol-native.c>
	flags: DONT_MOVE
	state: RUNNING
	source: 4 <alsa_input.usb-FiiO_DigiHug_USB_Audio-01.analog-stereo>
	volume: mono: 65536 / 100% / 0.00 dB
	        balance 0.00
	muted: no
	current latency: 3.99 ms
	requested latency: 6.94 ms
	sample spec: float32le 1ch 144Hz
	channel map: mono
	             Mono
	resample method: peaks
	owner module: 10
	client: 6 <PulseAudio Volume Control>
	properties:
		media.name = "Peak detect"
		application.name = "PulseAudio Volume Control"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.id = "org.PulseAudio.pavucontrol"
		application.icon_name = "audio-card"
		application.version = "5.0"
		application.process.id = "1148"
		application.process.user = "oz"
		application.process.host = "archbox"
		application.process.binary = "pavucontrol"
		application.language = "C"
		window.x11.display = ":0.0"
		application.process.machine_id = "b3af920d4b184eb6965e99886ee18907"
		application.process.session_id = "2"
		module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
    index: 44
	driver: <protocol-native.c>
	flags:
	state: RUNNING
	source: 4 <alsa_input.usb-FiiO_DigiHug_USB_Audio-01.analog-stereo>
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	muted: no
	current latency: 0.00 ms
	requested latency: 24.99 ms
	sample spec: float32le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	resample method: copy
	owner module: 10
	client: 85 <ALSA plug-in [audacity]>
	properties:
		media.name = "ALSA Capture"
		application.name = "ALSA plug-in [audacity]"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.process.id = "1618"
		application.process.user = "oz"
		application.process.host = "archbox"
		application.process.binary = "audacity"
		application.language = "C"
		window.x11.display = ":0.0"
		application.process.machine_id = "b3af920d4b184eb6965e99886ee18907"
		application.process.session_id = "2"
		application.icon_name = "audacity"
		module-stream-restore.id = "source-output-by-application-name:ALSA plug-in [audacity]"

pacmd list-source-outputs

3 source output(s) available.
    index: 0
	driver: <protocol-native.c>
	flags: DONT_MOVE
	state: RUNNING
	source: 0 <alsa_output.usb-FiiO_DigiHug_USB_Audio-01.analog-stereo.monitor>
	volume: mono: 65536 / 100% / 0.00 dB
	        balance 0.00
	muted: no
	current latency: 11.09 ms
	requested latency: 6.94 ms
	sample spec: float32le 1ch 144Hz
	channel map: mono
	             Mono
	resample method: peaks
	owner module: 10
	client: 6 <PulseAudio Volume Control>
	properties:
		media.name = "Peak detect"
		application.name = "PulseAudio Volume Control"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.id = "org.PulseAudio.pavucontrol"
		application.icon_name = "audio-card"
		application.version = "5.0"
		application.process.id = "1148"
		application.process.user = "oz"
		application.process.host = "archbox"
		application.process.binary = "pavucontrol"
		application.language = "C"
		window.x11.display = ":0.0"
		application.process.machine_id = "b3af920d4b184eb6965e99886ee18907"
		application.process.session_id = "2"
		module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
    index: 4
	driver: <protocol-native.c>
	flags: DONT_MOVE
	state: RUNNING
	source: 4 <alsa_input.usb-FiiO_DigiHug_USB_Audio-01.analog-stereo>
	volume: mono: 65536 / 100% / 0.00 dB
	        balance 0.00
	muted: no
	current latency: 3.99 ms
	requested latency: 6.94 ms
	sample spec: float32le 1ch 144Hz
	channel map: mono
	             Mono
	resample method: peaks
	owner module: 10
	client: 6 <PulseAudio Volume Control>
	properties:
		media.name = "Peak detect"
		application.name = "PulseAudio Volume Control"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.id = "org.PulseAudio.pavucontrol"
		application.icon_name = "audio-card"
		application.version = "5.0"
		application.process.id = "1148"
		application.process.user = "oz"
		application.process.host = "archbox"
		application.process.binary = "pavucontrol"
		application.language = "C"
		window.x11.display = ":0.0"
		application.process.machine_id = "b3af920d4b184eb6965e99886ee18907"
		application.process.session_id = "2"
		module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
    index: 44
	driver: <protocol-native.c>
	flags:
	state: RUNNING
	source: 4 <alsa_input.usb-FiiO_DigiHug_USB_Audio-01.analog-stereo>
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	muted: no
	current latency: 0.00 ms
	requested latency: 24.99 ms
	sample spec: float32le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	resample method: copy
	owner module: 10
	client: 85 <ALSA plug-in [audacity]>
	properties:
		media.name = "ALSA Capture"
		application.name = "ALSA plug-in [audacity]"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "35"
		application.process.id = "1618"
		application.process.user = "oz"
		application.process.host = "archbox"
		application.process.binary = "audacity"
		application.language = "C"
		window.x11.display = ":0.0"
		application.process.machine_id = "b3af920d4b184eb6965e99886ee18907"
		application.process.session_id = "2"
		application.icon_name = "audacity"
		module-stream-restore.id = "source-output-by-application-name:ALSA plug-in [audacity]"
[oz@archbox ~]$ ^C
[oz@archbox ~]$ ^C
[oz@archbox ~]$
[oz@archbox ~]$ pacmd list-sources
2 source(s) available.
    index: 0
	name: <alsa_output.usb-FiiO_DigiHug_USB_Audio-01.analog-stereo.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: (none)
	priority: 1040
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 1 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 1
	configured latency: 6.94 ms; range is 0.50 .. 2000.00 ms
	monitor_of: 0
	card: 0 <alsa_card.usb-FiiO_DigiHug_USB_Audio-01>
	module: 6
	properties:
		device.description = "Monitor of Fiio E10 Analog Stereo"
		device.class = "monitor"
		alsa.card = "0"
		alsa.card_name = "DigiHug USB Audio"
		alsa.long_card_name = "FiiO DigiHug USB Audio at usb-0000:00:14.0-4, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:4:1.1"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/sound/card0"
		udev.id = "usb-FiiO_DigiHug_USB_Audio-01"
		device.bus = "usb"
		device.vendor.id = "1852"
		device.vendor.name = "GYROCOM C&C Co., LTD"
		device.product.id = "7022"
		device.product.name = "Fiio E10"
		device.serial = "FiiO_DigiHug_USB_Audio"
		device.string = "0"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
  * index: 4
	name: <alsa_input.usb-FiiO_DigiHug_USB_Audio-01.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: (none)
	priority: 9049
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 1
	configured latency: 6.94 ms; range is 1.00 .. 2000.00 ms
	card: 0 <alsa_card.usb-FiiO_DigiHug_USB_Audio-01>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "DigiHug USB Audio"
		alsa.long_card_name = "FiiO DigiHug USB Audio at usb-0000:00:14.0-4, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:4:1.1"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/sound/card0"
		udev.id = "usb-FiiO_DigiHug_USB_Audio-01"
		device.bus = "usb"
		device.vendor.id = "1852"
		device.vendor.name = "GYROCOM C&C Co., LTD"
		device.product.id = "7022"
		device.product.name = "Fiio E10"
		device.serial = "FiiO_DigiHug_USB_Audio"
		device.string = "front:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Fiio E10 Analog Stereo"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	ports:
		analog-input: Analog Input (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <analog-input>

arecord -lL

null
    Discard all samples (playback) or generate zero samples (capture)
sysdefault
    Default Audio Device
lavrate
    Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pulse
    PulseAudio Sound Server
speex
    Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
default
    Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=Audio
    DigiHug USB Audio, USB Audio
    Default Audio Device
front:CARD=Audio,DEV=0
    DigiHug USB Audio, USB Audio
    Front output / input
usbstream:CARD=Audio
    DigiHug USB Audio
    USB Stream Output
sysdefault:CARD=PCH
    HDA Intel PCH, ALC887-VD Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC887-VD Analog
    Front output / input
usbstream:CARD=PCH
    HDA Intel PCH
    USB Stream Output
**** List of CAPTURE Hardware Devices ****
card 0: Audio [DigiHug USB Audio], device 0: USB Audio [USB Audio]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 2: ALC887-VD Alt Analog [ALC887-VD Alt Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

amixer -c0

Simple mixer control 'PCM',0
  Capabilities: pvolume pswitch pswitch-joined
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 110
  Mono:
  Front Left: Playback 110 [100%] [0.00dB] [on]
  Front Right: Playback 110 [100%] [0.00dB] [on]

V1del · 2023-12-04 17:33:52

You didn't post pacmd list-sources but outputs twice

But we can see that all your recordings go over the/a usb device are you aware of that/is that what you want? If you actually want to use the internal inputs you need to move the source-outputs accordingly to the correct device

Herbalist · 2023-12-04 20:12:46

V1del wrote:

You didn't post pacmd list-sources but outputs twice
But we can see that all your recordings go over the/a usb device are you aware of that/is that what you want? If you actually want to use the internal inputs you need to move the source-outputs accordingly to the correct device

pacmd list-sources

2 source(s) available.
    index: 0
	name: <alsa_output.usb-FiiO_DigiHug_USB_Audio-01.analog-stereo.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 1040
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
	monitor_of: 0
	card: 0 <alsa_card.usb-FiiO_DigiHug_USB_Audio-01>
	module: 6
	properties:
		device.description = "Monitor of Fiio E10 Analog Stereo"
		device.class = "monitor"
		alsa.card = "1"
		alsa.card_name = "DigiHug USB Audio"
		alsa.long_card_name = "FiiO DigiHug USB Audio at usb-0000:00:14.0-4, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:4:1.1"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/sound/card1"
		udev.id = "usb-FiiO_DigiHug_USB_Audio-01"
		device.bus = "usb"
		device.vendor.id = "1852"
		device.vendor.name = "GYROCOM C&C Co., LTD"
		device.product.id = "7022"
		device.product.name = "Fiio E10"
		device.serial = "FiiO_DigiHug_USB_Audio"
		device.string = "1"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
  * index: 1
	name: <alsa_input.usb-FiiO_DigiHug_USB_Audio-01.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9049
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
	card: 0 <alsa_card.usb-FiiO_DigiHug_USB_Audio-01>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "DigiHug USB Audio"
		alsa.long_card_name = "FiiO DigiHug USB Audio at usb-0000:00:14.0-4, full speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:4:1.1"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/sound/card1"
		udev.id = "usb-FiiO_DigiHug_USB_Audio-01"
		device.bus = "usb"
		device.vendor.id = "1852"
		device.vendor.name = "GYROCOM C&C Co., LTD"
		device.product.id = "7022"
		device.product.name = "Fiio E10"
		device.serial = "FiiO_DigiHug_USB_Audio"
		device.string = "front:1"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Fiio E10 Analog Stereo"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-usb"
	ports:
		analog-input: Analog Input (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <analog-input>

internal inputs are not working, neither from front panel connectors nor from the mother board io from the back, that's why i resorted to audio using the fiio e10k dac, If i can somehow manage to get microphone to also work through it, that would be great

Arch Linux

#1 2023-12-03 09:08:53

headset mic not working (pulseaudio)

#2 2023-12-03 22:43:16

Re: headset mic not working (pulseaudio)

#3 2023-12-04 09:18:06

Re: headset mic not working (pulseaudio)

#4 2023-12-04 17:33:52

Re: headset mic not working (pulseaudio)

#5 2023-12-04 20:12:46

Re: headset mic not working (pulseaudio)

Board footer