You are not logged in.

#1 2023-12-25 05:45:08

pasturegliding
Member
Registered: 2022-03-24
Posts: 24

[SOLVED] bluetoothd Failed to add UUID: Failed (0x03)

I cannot connect to Bluetooth anymore; I do not use it very often, so I am not sure when it happened.

$ bluetoothctl
Waiting to connect to bluetoothd...     [bluetooth]# hci0 new_settings: bondable ssp br/edr le secure-conn cis-central cis-peripheral
[bluetooth]# Agent registered
[bluetooth]# [CHG] Controller 04:CF:4B:1E:1D:0F Pairable: yes
[bluetooth]# power on
[bluetooth]# Failed to set power on: org.bluez.Error.Failed
$ systemctl status bluetooth
● bluetooth.service - Bluetooth service
     Loaded: loaded (/usr/lib/systemd/system/bluetooth.service; enabled; preset: disabled)
     Active: active (running) since Thu 2023-12-21 17:03:13 CST; 19h ago
       Docs: man:bluetoothd(8)
   Main PID: 950 (bluetoothd)
     Status: "Running"
      Tasks: 1 (limit: 38135)
     Memory: 2.6M (peak: 3.6M)
        CPU: 35ms
     CGroup: /system.slice/bluetooth.service
             └─950 /usr/lib/bluetooth/bluetoothd

Dec 21 17:03:18 pasture bluetoothd[950]: Endpoint registered: sender=:1.19 path=/MediaEndpoint/A2DPSource/faststream
Dec 21 17:03:18 pasture bluetoothd[950]: Endpoint registered: sender=:1.19 path=/MediaEndpoint/A2DPSource/faststream_duplex
Dec 21 17:03:18 pasture bluetoothd[950]: Endpoint registered: sender=:1.19 path=/MediaEndpoint/A2DPSink/opus_05
Dec 21 17:03:18 pasture bluetoothd[950]: Endpoint registered: sender=:1.19 path=/MediaEndpoint/A2DPSource/opus_05
Dec 21 17:03:18 pasture bluetoothd[950]: Endpoint registered: sender=:1.19 path=/MediaEndpoint/A2DPSink/opus_05_duplex
Dec 21 17:03:18 pasture bluetoothd[950]: Endpoint registered: sender=:1.19 path=/MediaEndpoint/A2DPSource/opus_05_duplex
Dec 21 17:03:18 pasture bluetoothd[950]: Failed to add UUID: Failed (0x03)
Dec 21 17:03:18 pasture bluetoothd[950]: Failed to add UUID: Failed (0x03)
Dec 21 17:06:08 pasture bluetoothd[950]: Failed to set mode: Failed (0x03)
Dec 22 12:43:44 pasture bluetoothd[950]: Failed to set mode: Failed (0x03)

I am not sure which UUID it is trying to add. I assume it's the bluetooth bus.

$ lsusb | grep "Blue"
Bus 003 Device 004: ID 8087:0032 Intel Corp. AX210 Bluetooth

I have tried restarting it, rebooting, and reinstalling bluez. I am not sure what to do next.

Here is the inxi if it helps, idk. I found a Manjaro post while googling and they felt it mattered. The only thing I can see in it is that the bluetooth driver is btusb. But

# inxi --admin --verbosity=7 --filter --no-host --width 
System:
  Kernel: 6.6.7-arch1-1 arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc available: acpi_pm parameters: BOOT_IMAGE=/vmlinuz-linux
    root=UUID=163be16b-9cea-4f0f-a279-ad052eeaf4cd rw loglevel=3 quiet
    i915.preliminary_hw_support=1 i915.modeset=1
    cryptdevice=UUID=170aaa6d-a9c1-469b-a35d-cfb7a6bec4d4:cryptroot
    root=UUID=163be16b-9cea-4f0f-a279-ad052eeaf4cd
  Desktop: dwm v: 6.4 dm: startx Distro: Arch Linux
Machine:
  Type: Laptop System: Framework product: Laptop (12th Gen Intel Core) v: A6
    serial: <filter>
  Mobo: Framework model: FRANMACP06 v: A6 serial: <filter> UEFI: INSYDE
    v: 03.05 date: 08/23/2022
Battery:
  ID-1: BAT1 charge: 22.9 Wh (51.3%) condition: 44.6/55.0 Wh (81.1%)
    volts: 15.1 min: 15.4 model: NVT Framewo type: Li-ion serial: <filter>
    status: discharging cycles: 175
Memory:
  System RAM: total: 32 GiB available: 31.06 GiB used: 2.32 GiB (7.5%)
    igpu: 60 MiB
  Array-1: capacity: 64 GiB slots: 2 modules: 2 EC: None
    max-module-size: 32 GiB note: est.
  Device-1: Controller0-ChannelA-DIMM0 type: DDR4 detail: synchronous
    size: 16 GiB speed: 2667 MT/s volts: curr: 1.2 width (bits): data: 64
    total: 64 manufacturer: Team Group Inc part-no: TEAMGROUP-SD4-3200
    serial: <filter>
  Device-2: Controller1-ChannelA-DIMM0 type: DDR4 detail: synchronous
    size: 16 GiB speed: 2667 MT/s volts: curr: 1.2 width (bits): data: 64
    total: 64 manufacturer: Team Group Inc part-no: TEAMGROUP-SD4-3200
    serial: <filter>
CPU:
  Info: model: 12th Gen Intel Core i7-1260P socket: U3E1 bits: 64
    type: MST AMCP arch: Alder Lake level: v3 note: check built: 2021+
    process: Intel 7 (10nm ESF) family: 6 model-id: 0x9A (154) stepping: 3
    microcode: 0x41D
  Topology: cpus: 1x cores: 12 mt: 4 tpc: 2 st: 8 threads: 16 smt: enabled
    cache: L1: 1.1 MiB desc: d-8x32 KiB, 4x48 KiB; i-4x32 KiB, 8x64 KiB L2: 9 MiB
    desc: 4x1.2 MiB, 2x2 MiB L3: 18 MiB desc: 1x18 MiB
  Speed (MHz): avg: 435 high: 658 min/max: 400/4700:3400
    base/boost: 3366/4700 scaling: driver: intel_pstate governor: powersave
    volts: 1.0 V ext-clock: 100 MHz cores: 1: 400 2: 400 3: 400 4: 400 5: 658
    6: 400 7: 520 8: 400 9: 589 10: 400 11: 400 12: 400 13: 400 14: 400 15: 400
    16: 400 bogomips: 79888
  Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
    arch_capabilities arch_lbr arch_perfmon art avx avx2 avx_vnni bmi1 bmi2
    bts clflush clflushopt clwb cmov constant_tsc cpuid cpuid_fault cx16 cx8
    de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est f16c flexpriority
    flush_l1d fma fpu fsgsbase fsrm fxsr gfni hfi ht hwp hwp_act_window
    hwp_epp hwp_notify hwp_pkg_req ibpb ibrs ibrs_enhanced ibt ida intel_pt
    invpcid lahf_lm lm mca mce md_clear mmx monitor movbe movdir64b movdiri
    msr mtrr nonstop_tsc nopl nx ospke pae pat pbe pclmulqdq pdcm pdpe1gb pebs
    pge pku pln pni popcnt pse pse36 pts rdpid rdrand rdseed rdtscp rep_good
    sdbg sep serialize sha_ni smap smep smx split_lock_detect ss ssbd sse sse2
    sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust
    tsc_deadline_timer tsc_known_freq umip user_shstk vaes vme vmx vnmi
    vpclmulqdq vpid waitpkg x2apic xgetbv1 xsave xsavec xsaveopt xsaves
    xtopology xtpr
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Enhanced / Automatic IBRS, IBPB: conditional,
    RSB filling, PBRSB-eIBRS: SW sequence
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel Alder Lake-P GT2 [Iris Xe Graphics] vendor: Framework
    driver: i915 v: kernel arch: Gen-12.2 process: Intel 10nm built: 2021-22+
    ports: active: eDP-1 empty: DP-1, DP-2, DP-3, DP-4 bus-ID: 00:02.0
    chip-ID: 8086:46a6 class-ID: 0300
  Device-2: Realtek Laptop Camera driver: uvcvideo type: USB rev: 2.0
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-7:2 chip-ID: 0bda:5634
    class-ID: 0e02 serial: <filter>
  Display: server: X.org v: 1.21.1.10 driver: X: loaded: modesetting
    alternate: fbdev,intel,vesa dri: iris gpu: i915 display-ID: :0
    note: <missing: xdpyinfo/xrandr>
  Monitor-1: eDP-1 model: BOE Display 0x095f built: 2019 res: 2256x1504
    dpi: 201 gamma: 1.2 size: 285x190mm (11.22x7.48") diag: 343mm (13.5")
    ratio: 3:2 modes: 2256x1504
  API: OpenGL Message: Unable to show GL data. glxinfo is missing.
Audio:
  Device-1: Intel Alder Lake PCH-P High Definition Audio vendor: Framework
    driver: snd_hda_intel v: kernel alternate: snd_sof_pci_intel_tgl
    bus-ID: 00:1f.3 chip-ID: 8086:51c8 class-ID: 0403
  API: ALSA v: k6.6.7-arch1-1 status: kernel-api
    tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: n/a (root, process) with:
    1: pipewire-pulse status: active 2: wireplumber status: active
    3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Wi-Fi 6 AX210/AX211/AX411 160MHz driver: iwlwifi v: kernel
    pcie: gen: 2 speed: 5 GT/s lanes: 1 bus-ID: a6:00.0 chip-ID: 8086:2725
    class-ID: 0280
  IF: wlan0 state: up mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: dynamic noprefixroute scope: global
  IP v6: <filter> type: noprefixroute scope: link
  WAN IP: <filter>
Bluetooth:
  Device-1: Intel AX210 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-10:4 chip-ID: 8087:0032
    class-ID: e001
  Report: btmgmt ID: hci0 rfk-id: 0 state: down bt-service: enabled,running
    rfk-block: hardware: no software: yes address: <filter> bt-v: 5.3 lmp-v: 12
    status: discoverable: no pairing: no
Logical:
  Message: No logical block device data found.
  Device-1: cryptroot maj-min: 254:0 type: LUKS dm: dm-0 size: 1.86 TiB
  Components:
  p-1: nvme0n1p2 maj-min: 259:2 size: 1.86 TiB
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 1.86 TiB used: 422.22 GiB (22.1%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Intel model: SSDPEKNW020T8
    size: 1.86 TiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: 004C temp: 43.9 C
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 1.86 TiB size: 1.86 TiB (100.00%) used: 422.06 GiB (22.1%)
    fs: btrfs block-size: 4096 B dev: /dev/dm-0 maj-min: 254:0 mapped: cryptroot
    label: N/A uuid: N/A
  ID-2: /boot raw-size: 1024 MiB size: 1022 MiB (99.80%)
    used: 155.8 MiB (15.2%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1
    maj-min: 259:1 label: N/A uuid: 3627-9EDB
Swap:
  Alert: No swap data was found.
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-2: 2-0:1 info: super-speed hub ports: 4 rev: 3.1
    speed: 20 Gb/s (2.33 GiB/s) lanes: 2 mode: 3.2 gen-2x2 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 3-7:2 info: Realtek Laptop Camera type: video driver: uvcvideo
    interfaces: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0
    power: 300mA chip-ID: 0bda:5634 class-ID: 0e02 serial: <filter>
  Device-2: 3-9:3 info: Shenzhen Goodix USB2.0 MISC type: <vendor specific>
    driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
    mode: 1.1 power: 100mA chip-ID: 27c6:609c class-ID: ef00 serial: <filter>
  Device-3: 3-10:4 info: Intel AX210 Bluetooth type: bluetooth driver: btusb
    interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
    power: 100mA chip-ID: 8087:0032 class-ID: e001
  Hub-4: 4-0:1 info: super-speed hub ports: 4 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 38.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Processes: 411 Uptime: 1d 1h 47m wakeups: 2 Init: systemd v: 255
  default: graphical tool: systemctl Compilers: gcc: 13.2.1 clang: 16.0.6
  Packages: pm: dpkg pkgs: 0 pm: pacman pkgs: 1729 libs: 406 tools: yay
  Shell: Sudo (sudo) v: 1.9.15p4 default: Bash v: 5.2.21 running-in: st
  inxi: 3.3.31

Last edited by pasturegliding (2023-12-26 22:44:58)

Offline

#2 2023-12-26 14:09:13

gcb
Member
Registered: 2014-02-12
Posts: 168

Re: [SOLVED] bluetoothd Failed to add UUID: Failed (0x03)

bluetooth is supposed to be off at boot, but i will see tons of those UUID errors

Last edited by gcb (2023-12-26 14:09:57)

Offline

#3 2023-12-26 15:19:22

Helluva
Member
Registered: 2023-11-19
Posts: 2

Re: [SOLVED] bluetoothd Failed to add UUID: Failed (0x03)

I had this issue and found out that Bluetooth was soft-blocked in `rfkill list`. Running `rfkill unblock bluetooth` helped

Offline

#4 2023-12-26 22:44:29

pasturegliding
Member
Registered: 2022-03-24
Posts: 24

Re: [SOLVED] bluetoothd Failed to add UUID: Failed (0x03)

Helluva wrote:

I had this issue and found out that Bluetooth was soft-blocked in `rfkill list`. Running `rfkill unblock bluetooth` helped

That did apparently solve it. Why is bluetooth being blocked in rfkill?

Offline

#5 2024-03-16 08:30:20

ileska
Member
Registered: 2024-01-10
Posts: 3

Re: [SOLVED] bluetoothd Failed to add UUID: Failed (0x03)

Helluva wrote:

I had this issue and found out that Bluetooth was soft-blocked in `rfkill list`. Running `rfkill unblock bluetooth` helped

Solved my problem, thanks a lot!

Offline

Board footer

Powered by FluxBB