[SOLVED]My laptop won't turn on the 240hz screen refresh rate

leessmin · 2024-04-23 10:55:00

I don't know what's going on, I restarted my system after typing sudo pacman -syu and found that my monitor was split into three interfaces，Then after I tried to uninstall my nvidia driver, my plasma booted up fine, but I had the problem after reinstalling nvidia, and finally I set my monitor refresh rate to 60hz and the system was back to normal.I suspect that my sudo pacman -syu command upgraded the nvidia-utils package,Is there a way for me to turn the 240hz refresh rate back on

Last edited by leessmin (2024-05-04 05:18:35)

seth · 2024-04-23 20:21:44

Please don't paraphrase, https://bbs.archlinux.org/viewtopic.php?id=57855
Please post your complete system journal for the boot:

sudo journalctl -b | curl -F 'file=@-' 0x0.st

Did you maybe update from plasma 5 to plasma 6 and are now defaulting to wayland (where the previous default session type was X11)?
Does the issue exist w/ plasma/X11?
If so, please also post your Xorg log, https://wiki.archlinux.org/title/Xorg#General and the output of "xrandr -q"

Generally see https://wiki.archlinux.org/title/KDE#Un … lution_set and https://wiki.archlinux.org/title/Variable_refresh_rat

leessmin · 2024-04-24 13:04:03

seth wrote:

Please don't paraphrase, https://bbs.archlinux.org/viewtopic.php?id=57855
Please post your complete system journal for the boot:
sudo journalctl -b | curl -F 'file=@-' 0x0.st
Did you maybe update from plasma 5 to plasma 6 and are now defaulting to wayland (where the previous default session type was X11)?
Does the issue exist w/ plasma/X11?
If so, please also post your Xorg log, https://wiki.archlinux.org/title/Xorg#General and the output of "xrandr -q"
Generally see https://wiki.archlinux.org/title/KDE#Un … lution_set and https://wiki.archlinux.org/title/Variable_refresh_rat

I am sorry that this is the first time I have published my question, and I do not follow the rules of arch linux. I am very sorry, and I apologize to you again,
I passed the order you gave me,This URL is generated.

http://0x0.st/XHK2.txt

I installed the system after plasma6, and then I've been using wayland, and I promise I haven't used x11,
I guess it has nothing to do with x11 and wayland, because I saw that systemd-backlight@backlight:nvidia_0.service failed to start when I looked at system-boot

leessmin · 2024-04-24 13:17:59

leessmin wrote:

seth wrote:
Please don't paraphrase, https://bbs.archlinux.org/viewtopic.php?id=57855
Please post your complete system journal for the boot:
sudo journalctl -b | curl -F 'file=@-' 0x0.st
Did you maybe update from plasma 5 to plasma 6 and are now defaulting to wayland (where the previous default session type was X11)?
Does the issue exist w/ plasma/X11?
If so, please also post your Xorg log, https://wiki.archlinux.org/title/Xorg#General and the output of "xrandr -q"
Generally see https://wiki.archlinux.org/title/KDE#Un … lution_set and https://wiki.archlinux.org/title/Variable_refresh_rat
I am sorry that this is the first time I have published my question, and I do not follow the rules of arch linux. I am very sorry, and I apologize to you again,
I passed the order you gave me,This URL is generated.
http://0x0.st/XHK2.txt
I installed the system after plasma6, and then I've been using wayland, and I promise I haven't used x11,
I guess it has nothing to do with x11 and wayland, because I saw that systemd-backlight@backlight:nvidia_0.service failed to start when I looked at system-boot

In my experiments, the x11 also had this problem,Here is the output of my xrandr-q

Screen 0: minimum 16 x 16, current 2560 x 1600, maximum 32767 x 32767
eDP-1 connected primary 2560x1600+0+0 (normal left inverted right x axis y axis) 350mm x 220mm
   2560x1600     59.99*+
   2048x1536     59.95  
   1920x1440     59.97  
   1600x1200     59.87  
   1440x1080     59.99  
   1400x1050     59.98  
   1280x1024     59.89  
   1280x960      59.94  
   1152x864      59.96  
   1024x768      59.92  
   800x600       59.86  
   640x480       59.38  
   320x240       59.52  
   1920x1200     59.88  
   1680x1050     59.95  
   1440x900      59.89  
   1280x800      59.81  
   1152x720      59.97  
   960x600       59.63  
   928x580       59.88  
   800x500       59.50  
   768x480       59.90  
   720x480       59.71  
   640x400       59.95  
   320x200       58.96  
   2560x1440     59.96  
   2048x1152     59.90  
   1920x1080     59.96  
   1600x900      59.95  
   1368x768      59.88  
   1280x720      59.86  
   1024x576      59.90  
   864x486       59.92  
   720x400       59.55  
   640x350       59.77

seth · 2024-04-24 13:21:03

4月 24 20:46:59 r97945hx systemd-logind[861]: /boot/loader/entries/arch.conf:2: Field 'nvidia_drm.modeset=1' without value, ignoring line.

4月 24 20:46:50 r97945hx kernel: [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
4月 24 20:47:03 r97945hx kwin_wayland_wrapper[1433]: MESA-LOADER: failed to open simpledrm: /usr/lib/dri/simpledrm_dri.so: 无法打开共享目标文件: 没有那个文件或目录 (search paths /usr/lib/dri, suffix _dri)

4月 24 20:46:54 r97945hx kernel: amdgpu 0000:06:00.0: [drm] Cannot find any crtc or sizes

4月 24 20:46:50 r97945hx kernel: NVRM: Xid (PCI:0000:01:00): 62, pid='<unknown>', name=<unknown>, 20262044 2027f08e 2027df5c 2022ec3e 20281296 2022adbe 00000000 00000000

So there's
1. the simpledrm device because of a bogus bootloader entry.
2. The amdgpu device with no outputs attached.
3. the nvidia GPU w/ an XID and pot. w/o modesetting support

4月 24 20:47:03 r97945hx kwin_wayland[1433]: kwin_core: parsing edid failed
4月 24 20:47:03 r97945hx kwin_wayland[1433]: kwin_wayland_drm: Couldn't parse EDID for connector DrmConnector(id=91, gpu=KWin::DrmGpu(0x59e9d8494170), name="eDP-1-未知", connection="Connected", countMode=2)

Please post your /boot/loader/entries/arch.conf but I guess you just added that as a new line instead of appending it to the options?

I am sorry that this is the first time I have published my question, and I do not follow the rules of arch linux. I am very sorry, and I apologize to you again

Calm down, you're not gonna be eaten alive (at least that's what I've to say according to my prob… wait, I better shouldn't talk about that!)
It's just that vaguely describing a problem doesn't really allow anyone to help you - and there's a sticky about that because it happens more often

Edit: more rules
Please don't post full quotes, you're bloating the thread.
And also please don't bump the thread - rather edit your previous post unless somebody has already replied.

Last edited by seth (2024-04-24 13:22:34)

leessmin · 2024-04-24 13:22:02

It's worth mentioning that every time I tried to turn on 240hz, my monitor would become like this and it wouldn't work at all.http://0x0.st/XHKJ.jpg

leessmin · 2024-04-24 13:25:21

seth wrote:

4月 24 20:46:59 r97945hx systemd-logind[861]: /boot/loader/entries/arch.conf:2: Field 'nvidia_drm.modeset=1' without value, ignoring line.
4月 24 20:46:50 r97945hx kernel: [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
4月 24 20:47:03 r97945hx kwin_wayland_wrapper[1433]: MESA-LOADER: failed to open simpledrm: /usr/lib/dri/simpledrm_dri.so: 无法打开共享目标文件: 没有那个文件或目录 (search paths /usr/lib/dri, suffix _dri)
4月 24 20:46:54 r97945hx kernel: amdgpu 0000:06:00.0: [drm] Cannot find any crtc or sizes
4月 24 20:46:50 r97945hx kernel: NVRM: Xid (PCI:0000:01:00): 62, pid='<unknown>', name=<unknown>, 20262044 2027f08e 2027df5c 2022ec3e 20281296 2022adbe 00000000 00000000
So there's
1. the simpledrm device because of a bogus bootloader entry.
2. The amdgpu device with no outputs attached.
3. the nvidia GPU w/ an XID and pot. w/o modesetting support
4月 24 20:47:03 r97945hx kwin_wayland[1433]: kwin_core: parsing edid failed
4月 24 20:47:03 r97945hx kwin_wayland[1433]: kwin_wayland_drm: Couldn't parse EDID for connector DrmConnector(id=91, gpu=KWin::DrmGpu(0x59e9d8494170), name="eDP-1-未知", connection="Connected", countMode=2)
Please post your /boot/loader/entries/arch.conf but I guess you just added that as a new line instead of appending it to the options?
I am sorry that this is the first time I have published my question, and I do not follow the rules of arch linux. I am very sorry, and I apologize to you again
Calm down, you're not gonna be eaten alive (at least that's what I've to say according to my prob… wait, I better shouldn't talk about that!)
It's just that vaguely describing a problem doesn't really allow anyone to help you - and there's a sticky about that because it happens more often

Edit: more rules
Please don't post full quotes, you're bloating the thread.
And also please don't bump the thread - rather edit your previous post unless somebody has already replied.

I input the /boot/loader/entries/arch.conf,I got the following

nvidia_drm.modeset=1

Regarding the amd gpu, I remember that I had turned off the amd gpu in the bios and used nvidia to connect the display directly,I need to check with the bios

Last edited by leessmin (2024-04-24 13:28:26)

seth · 2024-04-24 13:27:14

seth wrote:

Please don't post full quotes, you're bloating the thread.

That's not a legal line in that file and also the error says it's line #2 - what is line one?
Do not paraphrase, post the actual file contents.

leessmin · 2024-04-24 13:29:32

seth wrote:

seth wrote:
Please don't post full quotes, you're bloating the thread.
That's not a legal line in that file and also the error says it's line #2 - what is line one?
Do not paraphrase, post the actual file contents.

It's the only sentence in the file, and I seem to be the idiot who added it

leessmin · 2024-04-24 13:33:15

seth wrote:

seth wrote:
Please don't post full quotes, you're bloating the thread.
That's not a legal line in that file and also the error says it's line #2 - what is line one?
Do not paraphrase, post the actual file contents.

I have deleted the contents of this file, but this problem still exists,
By the way, it's worth mentioning that I used a command that someone recommended to me a few days before this problem arose, and I don't know if this command is the root cause of this problem

options nvidia NVreg_RegistryDwords="PowerMizerEnable=0x1; PerfLevelSrc=0x2222; PowerMizerLevel=0x3; PowerMizerDefault=0x3; PowerMizerDefaultAC=0x3"

Last edited by leessmin (2024-04-24 13:38:20)

seth · 2024-04-24 13:36:31

seth wrote:

Please don't post full quotes, you're bloating the thread.
And also please don't bump the thread - rather edit your previous post unless somebody has already replied.

Nobody told you to delete that file - you'll have to enable nvidia_drm.modeset=1, but correctly.
https://wiki.archlinux.org/title/Kernel … stemd-boot

tail -n1000 /boot/loader/entries/*

leessmin · 2024-04-24 13:40:02

seth wrote:

seth wrote:
Please don't post full quotes, you're bloating the thread.
And also please don't bump the thread - rather edit your previous post unless somebody has already replied.
Nobody told you to delete that file - you'll have to enable nvidia_drm.modeset=1, but correctly.
https://wiki.archlinux.org/title/Kernel … stemd-boot
tail -n1000 /boot/loader/entries/*

I got the following

r97945hx# strace -f -tt -o /tmp/backlight.strace /usr/lib/systemd/systemd-backlight load backlight:nvidia_0
zsh: command not found: strace
r97945hx# tail -n1000 /boot/loader/entries/*
==> /boot/loader/entries/2024-03-18_06-07-26_linux.conf <==
# Created by: archinstall
# Created on: 2024-03-18_06-07-26
title   Arch Linux (linux)
linux   /vmlinuz-linux
initrd  /amd-ucode.img
initrd  /initramfs-linux.img
options root=PARTUUID=18e9dfc7-5080-448e-ae76-078ad2d9c5fe zswap.enabled=0 rootflags=subvol=@ rw rootfstype=btrfs

==> /boot/loader/entries/2024-03-18_06-07-26_linux-fallback.conf <==
# Created by: archinstall
# Created on: 2024-03-18_06-07-26
title   Arch Linux (linux-fallback)
linux   /vmlinuz-linux
initrd  /amd-ucode.img
initrd  /initramfs-linux-fallback.img
options root=PARTUUID=18e9dfc7-5080-448e-ae76-078ad2d9c5fe zswap.enabled=0 rootflags=subvol=@ rw rootfstype=btrfs

==> /boot/loader/entries/arch.conf <==

seth · 2024-04-24 13:42:26

seth wrote:

seth wrote:
Please don't post full quotes, you're bloating the thread.
And also please don't bump the thread - rather edit your previous post unless somebody has already replied.

Don't stretch it.

Edit those files and append "nvidia_drm.modeset=1" to the "options" line

leessmin · 2024-04-24 13:42:46

leessmin wrote:

seth wrote:

seth wrote:
Please don't post full quotes, you're bloating the thread.
And also please don't bump the thread - rather edit your previous post unless somebody has already replied.
Nobody told you to delete that file - you'll have to enable nvidia_drm.modeset=1, but correctly.
https://wiki.archlinux.org/title/Kernel … stemd-boot
tail -n1000 /boot/loader/entries/*

I got the following

r97945hx# strace -f -tt -o /tmp/backlight.strace /usr/lib/systemd/systemd-backlight load backlight:nvidia_0
zsh: command not found: strace
r97945hx# tail -n1000 /boot/loader/entries/*
==> /boot/loader/entries/2024-03-18_06-07-26_linux.conf <==
# Created by: archinstall
# Created on: 2024-03-18_06-07-26
title   Arch Linux (linux)
linux   /vmlinuz-linux
initrd  /amd-ucode.img
initrd  /initramfs-linux.img
options root=PARTUUID=18e9dfc7-5080-448e-ae76-078ad2d9c5fe zswap.enabled=0 rootflags=subvol=@ rw rootfstype=btrfs

==> /boot/loader/entries/2024-03-18_06-07-26_linux-fallback.conf <==
# Created by: archinstall
# Created on: 2024-03-18_06-07-26
title   Arch Linux (linux-fallback)
linux   /vmlinuz-linux
initrd  /amd-ucode.img
initrd  /initramfs-linux-fallback.img
options root=PARTUUID=18e9dfc7-5080-448e-ae76-078ad2d9c5fe zswap.enabled=0 rootflags=subvol=@ rw rootfstype=btrfs

==> /boot/loader/entries/arch.conf <==

strace -f -tt -o /tmp/backlight.strace /usr/lib/systemd/systemd-backlight load backlight:nvidia_0 output

nvidia_0: Failed to write system 'brightness' attribute: Permission denied

It seems to be caused by no permission, do I need to use chmod +x to test it?

Last edited by leessmin (2024-04-24 13:43:47)

seth · 2024-04-24 13:43:54

seth wrote:

Don't stretch it.

I'm out.

leessmin · 2024-04-24 13:46:40

seth wrote:

seth wrote:
Don't stretch it.
I'm out.

wuwuwu

leessmin · 2024-04-24 13:51:38

I'm sorry. I just learned that I can't use quote to reply him. Please forgive me for being a newbie

Trilby · 2024-04-24 15:02:21

You can quote. But don't quote the full content of long posts. Sometimes it's useful to quote a specific part of a post you are replying to, but not the full post. On it's own this is a very minor etiquette violation, but I suspect seth was most bothered by the fact that you just kept doing it, even after being asked not to many times.

Note that you also post multiple times in sequence even when no one else has commented. This too is a very minor etiquette violation here - but again you were asked not to do this, and you just kept doing it. If English is not your first language, perhaps there is a lack of understanding resulting in these errors - but it looks like you are just ignoring guidelines on how to post properly here. This is easy to perceive as rude.

We welcome newbies, but we do expect that you take as much time reading and understanding our responses as we take in writing them. But I believe seth still gave you the solution. Did you edit your boot loader entries? If so, can we see what's in them now (the same `tail ...` command)?

Last edited by Trilby (2024-04-24 15:05:35)

leessmin · 2024-04-24 15:45:53

thank Trilby for reminding me,When I use the translation quotes are always translated as a synonym for price,That I did not understand seth's warning, and for that I am deeply sorry.I reinstalled my arch linux when I knew there was no way out, but the problem persisted. So now I think there are only two possibilities: one is the problem caused by a problem in one of the two packages, nvidia or Nvidia-utils.As I recall correctly, it appeared after I updated nvidia-utils.Here is my neofeatch

leessmin@r97945hx 
 OS: Arch Linux x86_64 
Host: Jiaolong Series MRID6 1 
Kernel: 6.8.7-arch1-1 
 Uptime: 7 mins 
 Packages: 721 (pacman) 
 Shell: bash 5.2.26 
 Resolution: 2560x1600 
  DE: Plasma 6.0.4 
   WM: KWin 
  Theme: Breeze-Dark [GTK2], Breeze [GTK3] 
Icons: breeze-dark [GTK2/3] 
   Terminal: konsole 
   CPU: AMD Ryzen 9 7945HX with Radeon Graphics (32) @ 5.461GHz 
GPU: NVIDIA GeForce RTX 4060 Max-Q / Mobile 
 GPU: AMD ATI 06:00.0 Raphael 
Memory: 2339MiB / 31258MiB

leessmin · 2024-04-24 15:51:05

nvidia bugs me every day.:(

seth · 2024-04-24 16:17:51

https://www.deepl.com/translator#zh/

Please post an updated system journal since you've created a completely new situation.

leessmin · 2024-04-24 16:41:48

This is what I get when I run

sudo journalctl -b | curl -F 'file=@-' 0x0.st

This is what I get http://0x0.st/XHZz.txt

seth · 2024-04-24 16:49:09

Status quo ante, except you're now running X11 - but you still get

4月 25 00:39:24 r97945hx kwin_x11[1245]: kwin_core: parsing edid failed

cat /sys/module/nvidia_drm/parameters/modeset

Then check for

grep options /boot/loader/entries/*

again and append "nvidia_drm.modeset=1" to those lines (not as an extra line!), report back with an udpated journal and the impact on your problem.

leessmin · 2024-04-24 16:58:34

[leessmin@r97945hx ~]$ sudo cat /sys/module/nvidia_drm/parameters/modeset
[sudo] leessmin 的密码：
Y

[leessmin@r97945hx ~]$ grep options /boot/loader/entries/*
/boot/loader/entries/2024-04-24_14-41-49_linux.conf:options root=PARTUUID=8dd000c4-c801-47b2-ba31-dc6854303bd8 zswap.enabled=0 rootflags=subvol=@ rw rootfstype=btrfs
/boot/loader/entries/2024-04-24_14-41-49_linux-fallback.conf:options root=PARTUUID=8dd000c4-c801-47b2-ba31-dc6854303bd8 zswap.enabled=0 rootflags=subvol=@ rw rootfstype=btrfs

I added nvidia_drm.modeset=1 to the end of the /boot/loader/entries/2024-04-24_14-41-49_linux.conf file
Final log output
http://0x0.st/XHZK.txt

seth · 2024-04-24 17:03:36

Modesetting is enabled, simpledrm device gone, edid parsing failure remains

xrandr -q
for OUT in /sys/class/drm/card*; do echo $OUT; edid-decode $OUT/edid; echo "================="; done

You'll need https://aur.archlinux.org/packages/edid-decode-git for the latter.

Arch Linux

#1 2024-04-23 10:55:00

[SOLVED]My laptop won't turn on the 240hz screen refresh rate

#2 2024-04-23 20:21:44

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#3 2024-04-24 13:04:03

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#4 2024-04-24 13:17:59

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#5 2024-04-24 13:21:03

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#6 2024-04-24 13:22:02

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#7 2024-04-24 13:25:21

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#8 2024-04-24 13:27:14

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#9 2024-04-24 13:29:32

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#10 2024-04-24 13:33:15

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#11 2024-04-24 13:36:31

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#12 2024-04-24 13:40:02

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#13 2024-04-24 13:42:26

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#14 2024-04-24 13:42:46

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#15 2024-04-24 13:43:54

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#16 2024-04-24 13:46:40

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#17 2024-04-24 13:51:38

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#18 2024-04-24 15:02:21

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#19 2024-04-24 15:45:53

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#20 2024-04-24 15:51:05

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#21 2024-04-24 16:17:51

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#22 2024-04-24 16:41:48

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#23 2024-04-24 16:49:09

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#24 2024-04-24 16:58:34

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

#25 2024-04-24 17:03:36

Re: [SOLVED]My laptop won't turn on the 240hz screen refresh rate

Board footer