You are not logged in.
...I cannot powerdown with the xfce menu anymore. It complains that HAL does not provide the correct rule? I am in the power group (and it worked fine before the upgrade).
Is anyone also experiencing this problem?
Thanks,
Blind
Last edited by Blind (2007-02-07 15:12:39)
Offline
Some more information.
In rc.conf I have
DAEMONS= ( syslog-ng hal ... )
Now, on boot up, everything looks good.
When I shut down, though, I get a shutdown error for hal _twice_ !?!
I somehow have the feeling something is wrong here - can someone point me in the right direction as to where to fix these issues?
Cheers,
Blind
Offline
Hi,
I have exactly the same problem after updating hal and dbus. And my laptops battery isn't recognized anymore since this update.
Hope it will be fixed soon.
Offline
Now I downgraded to the old dbus-0.93-1. Everything's running ok now, also hal-0.5.8.1-4. I think the problems depend only on the new dbus update.
Offline
did you restarted dbus after upgrading it? Read: http://www.archlinux.org/news/289/
Offline
Snowman, I sure did (maybe 20 times?).It creates the correct file in that directory that also has a uuid inside. It does not change the situation here, though.
Thanks,
Blind
Offline
Ok, even more info:
Before I make use of HAL:
[fred@chucks ~]$ ps -Alf | grep hal
5 S hal 2737 1 0 78 0 - 1404 308247 08:29 ? 00:00:00 /usr/sbin/hald
0 S root 2738 2737 0 77 0 - 724 - 08:29 ? 00:00:00 hald-runner
4 S hal 2744 2738 0 76 0 - 490 - 08:29 ? 00:00:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket
4 S hal 2755 2738 0 75 0 - 490 evdev_ 08:29 ? 00:00:00 hald-addon-keyboard: listening on /dev/input/event0
0 S root 2764 2738 0 78 0 - 480 - 08:29 ? 00:00:00 hald-addon-storage: polling /dev/hdc
0 S root 2901 2738 0 78 0 - 481 - 08:29 ? 00:00:00 hald-addon-storage: polling /dev/sdc
0 S root 2903 2738 0 78 0 - 481 - 08:29 ? 00:00:00 hald-addon-storage: polling /dev/sdb
0 S root 2905 2738 0 78 0 - 481 - 08:29 ? 00:00:00 hald-addon-storage: polling /dev/sdd
0 S root 2907 2738 0 76 0 - 480 - 08:29 ? 00:00:00 hald-addon-storage: polling /dev/sda
0 S fred 7791 7684 0 78 0 - 1001 pipe_w 08:49 pts/0 00:00:00 grep hal
The next thing I do is trying to shutdown using the XFCE menu. Then I get
[fred@chucks ~]$ ps -Alf | grep hal
4 S hal 2744 1 0 76 0 - 490 - 08:29 ? 00:00:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket
4 S hal 2755 1 0 78 0 - 490 evdev_ 08:29 ? 00:00:00 hald-addon-keyboard: listening on /dev/input/event0
0 S root 2764 1 0 78 0 - 480 - 08:29 ? 00:00:00 hald-addon-storage: polling /dev/hdc
0 S root 2901 1 0 78 0 - 481 - 08:29 ? 00:00:00 hald-addon-storage: polling /dev/sdc
0 S root 2903 1 0 78 0 - 481 - 08:29 ? 00:00:00 hald-addon-storage: polling /dev/sdb
0 S root 2905 1 0 78 0 - 481 - 08:29 ? 00:00:00 hald-addon-storage: polling /dev/sdd
0 S root 2907 1 0 76 0 - 480 - 08:29 ? 00:00:00 hald-addon-storage: polling /dev/sda
0 S fred 7990 7684 0 78 0 - 1000 pipe_w 08:49 pts/0 00:00:00 grep hal
So /usr/sbin/hald has exited.
Next experiment:
[root@chucks ~]# /etc/rc.d/hal restart
:: Stopping Hardware Abstraction Layer [FAIL]
:: Starting Hardware Abstraction Layer [DONE]
I get:
4 S hal 2744 1 0 76 0 - 490 - 08:29 ? 00:00:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket
4 S hal 2755 1 0 76 0 - 490 evdev_ 08:29 ? 00:00:00 hald-addon-keyboard: listening on /dev/input/event0
0 S root 2764 1 0 78 0 - 480 - 08:29 ? 00:00:00 hald-addon-storage: polling /dev/hdc
0 S root 2901 1 0 78 0 - 481 - 08:29 ? 00:00:00 hald-addon-storage: polling /dev/sdc
0 D root 2903 1 0 78 0 - 481 blk_ex 08:29 ? 00:00:00 hald-addon-storage: polling /dev/sdb
0 D root 2905 1 0 78 0 - 481 blk_ex 08:29 ? 00:00:00 hald-addon-storage: polling /dev/sdd
0 S root 2907 1 0 76 0 - 480 - 08:29 ? 00:00:00 hald-addon-storage: polling /dev/sda
5 S hal 9262 1 0 78 0 - 1450 308267 08:54 ? 00:00:00 /usr/sbin/hald
0 S root 9263 9262 0 80 0 - 723 - 08:54 ? 00:00:00 hald-runner
4 S hal 9269 9263 0 82 0 - 491 - 08:54 ? 00:00:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket
4 S hal 9280 9263 0 76 0 - 491 evdev_ 08:54 ? 00:00:00 hald-addon-keyboard: listening on /dev/input/event0
0 S root 9289 9263 0 78 0 - 480 - 08:54 ? 00:00:00 hald-addon-storage: polling /dev/sdd
0 S root 9291 9263 0 78 0 - 480 - 08:54 ? 00:00:00 hald-addon-storage: polling /dev/sdc
0 S root 9293 9263 0 78 0 - 480 - 08:54 ? 00:00:00 hald-addon-storage: polling /dev/sdb
0 S root 9295 9263 0 76 0 - 481 - 08:54 ? 00:00:00 hald-addon-storage: polling /dev/sda
0 S root 9302 9263 0 78 0 - 480 - 08:54 ? 00:00:00 hald-addon-storage: polling /dev/hdc
0 S root 9730 9068 0 78 0 - 1001 pipe_w 08:55 pts/0 00:00:00 grep hal
Crap!? Well, I stick in an USB Stick - it works in Thunar! And:
4 S hal 2744 1 0 76 0 - 490 - 08:29 ? 00:00:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket
4 S hal 2755 1 0 75 0 - 490 evdev_ 08:29 ? 00:00:00 hald-addon-keyboard: listening on /dev/input/event0
0 S root 2764 1 0 78 0 - 480 - 08:29 ? 00:00:00 hald-addon-storage: polling /dev/hdc
0 S root 2901 1 0 78 0 - 481 - 08:29 ? 00:00:00 hald-addon-storage: polling /dev/sdc
0 S root 2903 1 0 78 0 - 481 - 08:29 ? 00:00:00 hald-addon-storage: polling /dev/sdb
0 S root 2905 1 0 78 0 - 481 - 08:29 ? 00:00:00 hald-addon-storage: polling /dev/sdd
0 S root 2907 1 0 76 0 - 480 - 08:29 ? 00:00:00 hald-addon-storage: polling /dev/sda
5 S hal 9262 1 0 75 0 - 1450 308267 08:54 ? 00:00:00 /usr/sbin/hald
0 S root 9263 9262 0 78 0 - 723 - 08:54 ? 00:00:00 hald-runner
4 S hal 9269 9263 0 82 0 - 491 - 08:54 ? 00:00:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket
4 S hal 9280 9263 0 75 0 - 491 evdev_ 08:54 ? 00:00:00 hald-addon-keyboard: listening on /dev/input/event0
0 D root 9289 9263 0 78 0 - 480 blk_ex 08:54 ? 00:00:00 hald-addon-storage: polling /dev/sdd
0 D root 9291 9263 0 78 0 - 480 blk_ex 08:54 ? 00:00:00 hald-addon-storage: polling /dev/sdc
0 D root 9293 9263 0 78 0 - 480 blk_ex 08:54 ? 00:00:00 hald-addon-storage: polling /dev/sdb
0 S root 9295 9263 0 76 0 - 481 - 08:54 ? 00:00:00 hald-addon-storage: polling /dev/sda
0 S root 9302 9263 0 78 0 - 480 - 08:54 ? 00:00:00 hald-addon-storage: polling /dev/hdc
0 S root 10710 9068 0 85 0 - 1000 pipe_w 08:58 pts/0 00:00:00 grep hal
Yay, the daemon is still alive! What to make of this?! No idea!
Broken HAL rule?
Cheers,
Blind
Offline
hi there
i cannot mount cd or usbstick any longer. Gnome 2.16.3 gives me:
Cannot mount volume
Error org.freedesktop.DBus.Error.NoReply.
Message did not recieve a reply (timeout by messagebus)
Is this related to hal/dbus errors!?
Any suggestions?
THX!!
cu matsche
Offline
Thank you, all you hard working devs, for fixing this.
(I just thought you should get the credit you deserve)
Cheers,
Blind
Offline