Arch Linux

MartinDraft

Member

Registered: 2024-07-16

Posts: 2

[SOLVED] One of monitors is connected but receives no signal

I have 3 monitors plugged into GPU: 1x Display Port, 1x HDMI, 1x DVI-D. Monitor connected to DVI-D actually uses DVI-HDMI cable and it stopped working around 2 weeks ago after pacman -Syu. I have dualboot with Windows and monitor works there, also if connect to it with HDMI-HDMI cable it works fine (but unfortunately impossible for my setup to keep it that way). I use proprietary NVIDIA driver and KDE Xorg. I tried to use solutions from https://bbs.archlinux.org/viewtopic.php?id=280675 but I don't have spare DVI-HDMI cable to test if this is cable issue. Here is output from xrandr:

Screen 0: minimum 8 x 8, current 8960 x 2160, maximum 32767 x 32767
DVI-D-0 connected 2560x1440+2560+0 (normal left inverted right x axis y axis) 597mm x 336mm
   2560x1440     59.95*+  74.92    49.95
   2048x1280     60.00
   1920x1200     59.88
   1920x1080     60.00    59.94    50.00
   1680x1050     59.95
   1600x1200     60.00
   1600x900      60.00
   1440x900      59.89
   1280x1024     75.02
   1280x720      59.94    50.00
   1024x768      75.03    60.00
   800x600       75.00    60.32
   720x576       50.00
   720x480       59.94
   640x480       75.00    59.94    59.93
HDMI-0 connected primary 3840x2160+5120+0 (normal left inverted right x axis y axis) 1600mm x 900mm
   3840x2160     60.00*+  59.94    50.00    29.97    25.00    23.98
   4096x2160     59.94    50.00    29.97    25.00    24.00    23.98
   1920x1080    119.88   100.00    60.00    59.94    50.00    29.97    25.00    23.98
   1360x768      60.02
   1280x1024     60.02
   1280x720      59.94    50.00
   1152x864      60.00
   1024x768      60.00
   800x600       60.32
   720x576       50.00
   720x480       59.94
   640x480       59.95    59.94    59.93
DP-0 connected 2560x1440+0+0 (normal left inverted right x axis y axis) 597mm x 336mm
   2560x1440    143.97*+ 120.00    99.95    59.95
   1920x1080    119.88   100.00    60.00    59.94    50.00
   1280x720      59.94    50.00
   1024x768      60.00
   800x600       60.32
   720x480       59.94
   640x480       59.94    59.93
DP-1 disconnected (normal left inverted right x axis y axis)

Last edited by MartinDraft (2024-08-05 06:21:05)

seth

Member

Registered: 2012-09-03

Posts: 60,000

Re: [SOLVED] One of monitors is connected but receives no signal

https://bbs.archlinux.org/viewtopic.php … 0#p2184290

I have dualboot with Windows

3rd link below. Mandatory.
Disable it (it's NOT the BIOS setting!) and reboot windows and linux twice for voodo reasons.

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

MartinDraft

Member

Registered: 2024-07-16

Posts: 2

Re: [SOLVED] One of monitors is connected but receives no signal

3rd link below. Mandatory.
Disable it (it's NOT the BIOS setting!) and reboot windows and linux twice for voodo reasons.

Ahead of you there.

Regarding the issue, as it is driver problem I mark this as solved, tweaked setup by buying adapter so my long HDMI-HDMI cable connected to monitor I don't use on Linux is DVI-D-HDMI-HDMI.