You are not logged in.
That's for an "W311MI v6.0 AX300 Wi-Fi 6 Wireless Nano USB Adapter" which is *completely* not the dongle/chip you're currently using?
https://aur.archlinux.org/packages?O=0& … &submit=Go
So, I should try installing one of these packages and see what works for me? Okay, let's try this, hope this works.
Thanks,
LL
Offline
Unfortunately, installing the aic8800d80-dkms did not improve any network performance.
And trying to install the aic8800-dkms gives these errors-
[ak@G31M-ES2L ~]$ yay -S aic8800-dkms
AUR Explicit (1): aic8800-dkms-1.0.5-1
:: PKGBUILD up to date, skipping download: aic8800-dkms
1 aic8800-dkms (Build Files Exist)
==> Packages to cleanBuild?
==> [N]one [A]ll [Ab]ort [I]nstalled [No]tInstalled or (1 2 3, 1-3, ^4)
==>
1 aic8800-dkms (Build Files Exist)
==> Diffs to show?
==> [N]one [A]ll [Ab]ort [I]nstalled [No]tInstalled or (1 2 3, 1-3, ^4)
==>
==> Making package: aic8800-dkms 1.0.5-1 (Sat 01 Mar 2025 04:09:53 PM IST)
==> Retrieving sources...
-> Found aic8800-dkms.deb
-> Found 0001-Make-CONFIG_RFTEST-n-valid.patch
-> Found 0002-Fix-DKMS-config.patch
-> Found 0003-Fix-kernel-logs.patch
==> WARNING: Skipping verification of source file PGP signatures.
==> Validating source files with sha512sums...
aic8800-dkms.deb ... FAILED
0001-Make-CONFIG_RFTEST-n-valid.patch ... Skipped
0002-Fix-DKMS-config.patch ... Skipped
0003-Fix-kernel-logs.patch ... Skipped
==> ERROR: One or more files did not pass the validity check!
-> error downloading sources: /home/ak/.cache/yay/aic8800-dkms
context: exit status 1
:: (1/1) Parsing SRCINFO: aic8800-dkms
==> Making package: aic8800-dkms 1.0.5-1 (Sat 01 Mar 2025 04:09:54 PM IST)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found aic8800-dkms.deb
-> Found 0001-Make-CONFIG_RFTEST-n-valid.patch
-> Found 0002-Fix-DKMS-config.patch
-> Found 0003-Fix-kernel-logs.patch
==> Validating source files with sha512sums...
aic8800-dkms.deb ... FAILED
0001-Make-CONFIG_RFTEST-n-valid.patch ... Skipped
0002-Fix-DKMS-config.patch ... Skipped
0003-Fix-kernel-logs.patch ... Skipped
==> ERROR: One or more files did not pass the validity check!
-> error making: aic8800-dkms-exit status 1
-> Failed to install the following packages. Manual intervention is required:
aic8800-dkms - exit status 1
[ak@G31M-ES2L ~]$
I already had a doubt about aic8800d80-dkms, as it said AX900 and I am using AX300.
Thanks,
LL
Offline
I managed to install the aic8800-dkms, it looks like the packages sha512 checksum and it's version in PKGBUILD were outdated, had to update them with nano.
But after installing this, there was not much improvement, only the upload speed got better, 2.12Mb/s but the download speed got even more stable. But the internet speed is still capped at 500KB/s.
I think there is a hard limit set by some configuration/setting for my mobile phone? Because other mobile phones are doing better than this much newer phone. The POCO M3 doesn't even supply a stable 1.2 MB/s in torrent, but this give 18MB/s in torrents!
Here is the logs-
http://0x0.st/8mle.txt
Thanks,
LL
Last edited by LinuxLover471 (2025-03-01 11:00:13)
Offline
Mar 01 16:24:35 G31M-ES2L wpa_supplicant[495]: wlan0: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-29 noise=9999 txrate=21700
Signal is much better, but there's no sign of any aic chip.
Maybe let's start with what hardware you're actually using
lsusb -tv
lspci -knn
Online
Maybe let's start with what hardware you're actually using
lsusb -tv lspci -knn
Here is lsusb -tv-
[ak@G31M-ES2L ~]$ lsusb -tv
/: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=uhci_hcd/2p, 12M
ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=ehci-pci/8p, 480M
ID 1d6b:0002 Linux Foundation 2.0 root hub
|__ Port 005: Dev 002, If 0, Class=Hub, Driver=hub/4p, 480M
ID 1a40:0101 Terminus Technology Inc. Hub
|__ Port 006: Dev 003, If 0, Class=Vendor Specific Class, Driver=rt2800usb, 480M
ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
/: Bus 003.Port 001: Dev 001, Class=root_hub, Driver=uhci_hcd/2p, 12M
ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 004.Port 001: Dev 001, Class=root_hub, Driver=uhci_hcd/2p, 12M
ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 005.Port 001: Dev 001, Class=root_hub, Driver=uhci_hcd/2p, 12M
ID 1d6b:0001 Linux Foundation 1.1 root hub
|__ Port 001: Dev 002, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
ID 046d:c077 Logitech, Inc. Mouse
|__ Port 002: Dev 003, If 0, Class=Human Interface Device, Driver=usbhid, 12M
ID 046d:c33c Logitech, Inc.
|__ Port 002: Dev 003, If 1, Class=Human Interface Device, Driver=usbhid, 12M
ID 046d:c33c Logitech, Inc.
Here is lspci -knn
[ak@G31M-ES2L ~]$ lspci -knn
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 10)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Kernel modules: intel_agp
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 10)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Kernel driver in use: pcieport
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD (Realtek ALC887) [1458:a002]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 01)
Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD [1458:5001]
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 01)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5001]
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 01)
Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD [1458:5004]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 01)
Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD [1458:5004]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 01)
Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD [1458:5004]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 01)
Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD [1458:5004]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 01)
Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD [1458:5006]
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:5000]
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5001]
Kernel driver in use: lpc_ich
Kernel modules: leds_ss4200, intel_rng, lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] [8086:27c0] (rev 01)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:b002]
Kernel driver in use: ata_piix
Kernel modules: ata_piix, pata_acpi, ata_generic
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 01)
Subsystem: Gigabyte Technology Co., Ltd GA-8I945PG-RH/GA-D525TUD Mainboard [1458:5001]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK107 [GeForce GT 740] [10de:0fc8] (rev a1)
Subsystem: NVIDIA Corporation Device [10de:109a]
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia_drm, nvidia
01:00.1 Audio device [0403]: NVIDIA Corporation GK107 HDMI Audio Controller [10de:0e1b] (rev a1)
Subsystem: NVIDIA Corporation Device [10de:109a]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8131 Gigabit Ethernet [1969:1063] (rev c0)
Subsystem: Gigabyte Technology Co., Ltd GA-G31M-ES2L Motherboard [1458:e000]
Kernel driver in use: atl1c
Kernel modules: atl1c
Output of inxi -Fxxxz-
[ak@G31M-ES2L ~]$ inxi -Fxxxz
System:
Kernel: 6.13.5-arch1-1 arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc
Desktop: KDE Plasma v: 6.3.2 tk: Qt v: N/A wm: kwin_x11 vt: 2 dm: SDDM
Distro: Arch Linux
Machine:
Type: Desktop Mobo: Gigabyte model: G31M-ES2L serial: <superuser required>
uuid: <superuser required> BIOS: Award v: FI date: 08/09/2010
CPU:
Info: quad core model: Intel Core2 Quad Q9550 bits: 64 type: MCP
smt: <unsupported> arch: Penryn rev: A cache: L1: 256 KiB L2: 12 MiB
Speed (MHz): avg: 2833 min/max: N/A cores: 1: 2833 2: 2833 3: 2833 4: 2833
bogomips: 22667
Flags: ht lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx
Graphics:
Device-1: NVIDIA GK107 [GeForce GT 740] driver: nvidia v: 470.256.02
arch: Kepler-2 pcie: speed: 2.5 GT/s lanes: 16 ports: active: none
off: HDMI-A-1 empty: DVI-I-1,VGA-1 bus-ID: 01:00.0 chip-ID: 10de:0fc8
class-ID: 0300
Display: x11 server: X.org v: 1.21.1.16 with: Xwayland v: 24.1.6
compositor: kwin_x11 driver: X: loaded: nvidia unloaded: modesetting
alternate: fbdev,nouveau,nv,vesa gpu: nvidia,nvidia-nvswitch
display-ID: :0 note: <missing: xdpyinfo/xrandr>
Monitor-1: HDMI-A-1 model: LG (GoldStar) FHD serial: <filter>
res: 1920x1080 dpi: 102 size: 480x260mm (18.9x10.24") diag: 546mm (21.5")
modes: max: 1920x1080 min: 640x480
API: OpenGL Message: Unable to show GL data. glxinfo is missing.
Info: Tools: de: kscreen-doctor gpu: nvidia-settings,nvidia-smi x11: xprop
Audio:
Device-1: Intel NM10/ICH7 Family High Definition Audio
vendor: Gigabyte GA-D525TUD driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
chip-ID: 8086:27d8 class-ID: 0403
Device-2: NVIDIA GK107 HDMI Audio driver: snd_hda_intel v: kernel pcie:
speed: 2.5 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:0e1b class-ID: 0403
API: ALSA v: k6.13.5-arch1-1 status: kernel-api
Server-1: JACK v: 1.9.22 status: off
Server-2: PipeWire v: 1.2.7 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
Network:
Device-1: Qualcomm Atheros AR8131 Gigabit Ethernet
vendor: Gigabyte GA-G31M-ES2L driver: atl1c v: kernel pcie: speed: 2.5 GT/s
lanes: 1 port: bf00 bus-ID: 03:00.0 chip-ID: 1969:1063 class-ID: 0200
IF: enp3s0 state: down mac: <filter>
Device-2: Ralink RT5370 Wireless Adapter driver: rt2800usb type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 bus-ID: 2-6:3 chip-ID: 148f:5370
class-ID: 0000 serial: <filter>
IF: wlan0 state: up mac: <filter>
Drives:
Local Storage: total: 1.38 TiB used: 16.38 GiB (1.2%)
ID-1: /dev/sda vendor: A-Data model: SU800 size: 476.94 GiB
speed: <unknown> tech: SSD serial: <filter> fw-rev: 8B scheme: MBR
ID-2: /dev/sdb vendor: Toshiba model: DT01ACA100 size: 931.51 GiB
speed: <unknown> tech: HDD rpm: 7200 serial: <filter> fw-rev: A7C0
scheme: MBR
Partition:
ID-1: / size: 173.1 GiB used: 13.19 GiB (7.6%) fs: ext4 dev: /dev/sda1
ID-2: /home size: 14.66 GiB used: 3.18 GiB (21.7%) fs: ext4 dev: /dev/sda6
Swap:
ID-1: swap-1 type: zram size: 1.91 GiB used: 678.5 MiB (34.7%) priority: 100
dev: /dev/zram0
ID-2: swap-2 type: partition size: 8 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/sda3
Sensors:
System Temperatures: cpu: 68.0 C mobo: N/A gpu: nvidia temp: 52 C
Fan Speeds (rpm): N/A gpu: nvidia fan: 35%
Info:
Memory: total: 4 GiB available: 3.82 GiB used: 3.12 GiB (81.6%)
Processes: 192 Power: uptime: 1h 10m states: freeze,mem,disk suspend: deep
wakeups: 0 hibernate: platform Init: systemd v: 257 default: graphical
Packages: pm: pacman pkgs: 725 Compilers: gcc: 14.2.1 Shell: Bash
v: 5.2.37 running-in: konsole inxi: 3.3.37
Thanks for the suggestion of changing the usb adapter's location, now I can use wi-fi from the other room, in case my family is using it.
Thanks,
LL
Offline
I also tried using usb tethering to see if the output of my mobile phone was low, but it seems like that usb tethering gave okay results with 9Mb/s of download and average 1Mb/s of upload speed.
Edit- Okay, this is getting ridiculous, I just got a 4Mb/s download with 18Mb/s upload on wi-fi??????
Last edited by LinuxLover471 (2025-03-01 15:40:53)
Offline
You're not measuring this with some bittorrent client, are you?
Get ABBS - there's a basic speedtest against linode servers in that.
Online
I don't know what happened, but I just did a speedtest from google right now and the speed is 45Mb/s download and 2Mb/s upload.
I think this was fixed by the aic8800-dkms packages and by updating to the latest version of arch. Changing the router location to the front did help.
Here are the logs if they matter-
http://0x0.st/8a5A.txt
Thanks,
LL
Last edited by LinuxLover471 (2025-03-02 06:45:29)
Offline
There's no aic chip in that journal, "lsmod | grep 88", but you've a very good signal now
Mar 02 12:08:42 G31M-ES2L wpa_supplicant[498]: wlan0: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-19 noise=9999 txrate=21700
Thanks for the suggestion of changing the usb adapter's location
Online