You are not logged in.
Pages: 1
Hi,
My mb is asrock z790 pg-itx, it use realtek ALC4082, connected via usb. I use pipewire and wireplumber. I've tried this from archwiki but no effect. It works properly on LMDE6 Live iso and windows. I vaguely remember from kernel 6.12 to today, my mic never work properly. I always ignore it, until I need to use my mic recently. There are many similar problems posted on the forum but still, here are some output.
pactl list sources
Source #58
State: SUSPENDED
Name: alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor
Description: Monitor of GA104 High Definition Audio Controller Digital Stereo (HDMI)
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_01_00.1.hdmi-stereo
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "1"
alsa.card_name = "HDA NVidia"
alsa.class = "generic"
alsa.components = "HDA:10de009e,38424663,00100100"
alsa.device = "3"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 0"
alsa.long_card_name = "HDA NVidia at 0x84080000 irq 17"
alsa.mixer_name = "Nvidia GPU 9e HDMI/DP"
alsa.name = "LG ULTRAWIDE"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "HDA NVidia at 0x84080000 irq 17"
api.alsa.card.name = "HDA NVidia"
api.alsa.path = "hdmi:1"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "4"
device.api = "alsa"
device.class = "monitor"
device.icon_name = "audio-card-analog"
device.id = "45"
device.profile.description = "Digital Stereo (HDMI)"
device.profile.name = "hdmi-stereo"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
iec958.codecs = "[\"PCM\"]"
media.class = "Audio/Sink"
device.description = "GA104 High Definition Audio Controller"
node.name = "alsa_output.pci-0000_01_00.1.hdmi-stereo"
node.nick = "LG ULTRAWIDE"
node.pause-on-idle = "false"
object.path = "alsa:acp:NVidia:4:playback"
port.group = "playback"
priority.driver = "696"
priority.session = "696"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "40"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "44"
object.serial = "58"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "pci"
device.bus_path = "pci-0000:01:00.1"
device.enum.api = "udev"
device.name = "alsa_card.pci-0000_01_00.1"
device.nick = "HDA NVidia"
device.plugged.usec = "4850252"
device.product.id = "0x228b"
device.product.name = "GA104 High Definition Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.vendor.id = "0x10de"
device.vendor.name = "NVIDIA Corporation"
spa.object.id = "4"
device.string = "1"
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, availability group: Legacy 1, available)
Active Port: hdmi-output-0
Formats:
pcm
Source #59
State: RUNNING
Name: alsa_output.usb-Generic_USB_Audio-00.HiFi__SPDIF__sink.monitor
Description: Monitor of USB Audio S/PDIF Output
Driver: PipeWire
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.usb-Generic_USB_Audio-00.HiFi__SPDIF__sink
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "2"
alsa.card_name = "USB Audio"
alsa.class = "generic"
alsa.components = "USB26ce:0a08"
alsa.device = "3"
alsa.driver_name = "snd_usb_audio"
alsa.id = "USB Audio"
alsa.long_card_name = "Generic USB Audio at usb-0000:00:14.0-6, high speed"
alsa.mixer_device = "_ucm0003.hw:Audio"
alsa.mixer_name = "USB Mixer"
alsa.name = "USB Audio #3"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "Generic USB Audio at usb-0000:00:14.0-6, high speed"
api.alsa.card.name = "USB Audio"
api.alsa.open.ucm = "true"
api.alsa.path = "hw:Audio,3"
api.alsa.pcm.card = "2"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "10"
device.api = "alsa"
device.class = "monitor"
device.icon_name = "audio-speakers"
device.id = "46"
device.profile.description = "S/PDIF Output"
device.profile.name = "HiFi: SPDIF: sink"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "USB Audio"
node.name = "alsa_output.usb-Generic_USB_Audio-00.HiFi__SPDIF__sink"
node.nick = "USB Audio #3"
node.pause-on-idle = "false"
object.path = "alsa:acp:Audio:10:playback"
port.group = "playback"
priority.driver = "696"
priority.session = "696"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "40"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "43"
object.serial = "59"
node.max-latency = "16384/48000"
api.alsa.period-size = "256"
api.alsa.period-num = "128"
api.alsa.headroom = "256"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "2"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio2"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "usb"
device.bus-id = "usb-Generic_USB_Audio-00"
device.bus_path = "pci-0000:00:14.0-usb-0:6:1.0"
device.enum.api = "udev"
device.name = "alsa_card.usb-Generic_USB_Audio-00"
device.nick = "USB Audio"
device.plugged.usec = "8353136"
device.product.id = "0x0a08"
device.product.name = "USB Audio"
device.serial = "Generic_USB_Audio"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/sound/card2"
device.vendor.id = "0x26ce"
device.vendor.name = "Generic"
spa.object.id = "6"
device.string = "2"
Ports:
[Out] SPDIF: S/PDIF Output (type: SPDIF, priority: 100, availability unknown)
Active Port: [Out] SPDIF
Formats:
pcm
Source #60
State: SUSPENDED
Name: alsa_output.usb-Generic_USB_Audio-00.HiFi__Headphones__sink.monitor
Description: Monitor of USB Audio Front Headphones
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.usb-Generic_USB_Audio-00.HiFi__Headphones__sink
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "2"
alsa.card_name = "USB Audio"
alsa.class = "generic"
alsa.components = "USB26ce:0a08"
alsa.device = "1"
alsa.driver_name = "snd_usb_audio"
alsa.id = "USB Audio"
alsa.long_card_name = "Generic USB Audio at usb-0000:00:14.0-6, high speed"
alsa.mixer_device = "_ucm0003.hw:Audio"
alsa.mixer_name = "USB Mixer"
alsa.name = "USB Audio #1"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "Generic USB Audio at usb-0000:00:14.0-6, high speed"
api.alsa.card.name = "USB Audio"
api.alsa.open.ucm = "true"
api.alsa.path = "hw:Audio,1"
api.alsa.pcm.card = "2"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "11"
device.api = "alsa"
device.class = "monitor"
device.icon_name = "audio-headphones"
device.id = "46"
device.profile.description = "Front Headphones"
device.profile.name = "HiFi: Headphones: sink"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "USB Audio"
node.name = "alsa_output.usb-Generic_USB_Audio-00.HiFi__Headphones__sink"
node.nick = "USB Audio #1"
node.pause-on-idle = "false"
object.path = "alsa:acp:Audio:11:playback"
port.group = "playback"
priority.driver = "728"
priority.session = "728"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "40"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "56"
object.serial = "60"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "2"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio2"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "usb"
device.bus-id = "usb-Generic_USB_Audio-00"
device.bus_path = "pci-0000:00:14.0-usb-0:6:1.0"
device.enum.api = "udev"
device.name = "alsa_card.usb-Generic_USB_Audio-00"
device.nick = "USB Audio"
device.plugged.usec = "8353136"
device.product.id = "0x0a08"
device.product.name = "USB Audio"
device.serial = "Generic_USB_Audio"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/sound/card2"
device.vendor.id = "0x26ce"
device.vendor.name = "Generic"
spa.object.id = "6"
device.string = "2"
Ports:
[Out] Headphones: Front Headphones (type: Headphones, priority: 300, availability group: Headphone - Output, not available)
Active Port: [Out] Headphones
Formats:
pcm
Source #61
State: SUSPENDED
Name: alsa_output.usb-Generic_USB_Audio-00.HiFi__Speaker__sink.monitor
Description: Monitor of USB Audio Speakers
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.usb-Generic_USB_Audio-00.HiFi__Speaker__sink
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "2"
alsa.card_name = "USB Audio"
alsa.class = "generic"
alsa.components = "USB26ce:0a08"
alsa.device = "0"
alsa.driver_name = "snd_usb_audio"
alsa.id = "USB Audio"
alsa.long_card_name = "Generic USB Audio at usb-0000:00:14.0-6, high speed"
alsa.mixer_device = "_ucm0003.hw:Audio"
alsa.mixer_name = "USB Mixer"
alsa.name = "USB Audio"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "Generic USB Audio at usb-0000:00:14.0-6, high speed"
api.alsa.card.name = "USB Audio"
api.alsa.open.ucm = "true"
api.alsa.path = "hw:Audio"
api.alsa.pcm.card = "2"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "12"
device.api = "alsa"
device.class = "monitor"
device.icon_name = "audio-speakers"
device.id = "46"
device.profile.description = "Speakers"
device.profile.name = "HiFi: Speaker: sink"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "USB Audio"
node.name = "alsa_output.usb-Generic_USB_Audio-00.HiFi__Speaker__sink"
node.nick = "USB Audio"
node.pause-on-idle = "false"
object.path = "alsa:acp:Audio:12:playback"
port.group = "playback"
priority.driver = "1000"
priority.session = "1000"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "40"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "54"
object.serial = "61"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "2"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio2"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "usb"
device.bus-id = "usb-Generic_USB_Audio-00"
device.bus_path = "pci-0000:00:14.0-usb-0:6:1.0"
device.enum.api = "udev"
device.name = "alsa_card.usb-Generic_USB_Audio-00"
device.nick = "USB Audio"
device.plugged.usec = "8353136"
device.product.id = "0x0a08"
device.product.name = "USB Audio"
device.serial = "Generic_USB_Audio"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/sound/card2"
device.vendor.id = "0x26ce"
device.vendor.name = "Generic"
spa.object.id = "6"
device.string = "2"
Ports:
[Out] Speaker: Speakers (type: Speaker, priority: 200, availability group: Speaker - Output, available)
Active Port: [Out] Speaker
Formats:
pcm
Source #62
State: SUSPENDED
Name: alsa_input.usb-Generic_USB_Audio-00.HiFi__Mic2__source
Description: USB Audio Front Microphone
Driver: PipeWire
Sample Specification: s24le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 41350 / 63% / -12.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "2"
alsa.card_name = "USB Audio"
alsa.class = "generic"
alsa.components = "USB26ce:0a08"
alsa.device = "1"
alsa.driver_name = "snd_usb_audio"
alsa.id = "USB Audio"
alsa.long_card_name = "Generic USB Audio at usb-0000:00:14.0-6, high speed"
alsa.mixer_device = "_ucm0003.hw:Audio"
alsa.mixer_name = "USB Mixer"
alsa.name = "USB Audio #1"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "Generic USB Audio at usb-0000:00:14.0-6, high speed"
api.alsa.card.name = "USB Audio"
api.alsa.open.ucm = "true"
api.alsa.path = "hw:Audio,1"
api.alsa.pcm.card = "2"
api.alsa.pcm.stream = "capture"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "13"
device.api = "alsa"
device.class = "sound"
device.icon_name = "audio-input-microphone"
device.id = "46"
device.profile.description = "Front Microphone"
device.profile.name = "HiFi: Mic2: source"
device.routes = "1"
factory.name = "api.alsa.pcm.source"
media.class = "Audio/Source"
device.description = "USB Audio"
node.name = "alsa_input.usb-Generic_USB_Audio-00.HiFi__Mic2__source"
node.nick = "USB Audio #1"
node.pause-on-idle = "false"
object.path = "alsa:acp:Audio:13:capture"
port.group = "capture"
priority.driver = "1728"
priority.session = "1728"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "40"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "55"
object.serial = "62"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "2"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio2"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "usb"
device.bus-id = "usb-Generic_USB_Audio-00"
device.bus_path = "pci-0000:00:14.0-usb-0:6:1.0"
device.enum.api = "udev"
device.name = "alsa_card.usb-Generic_USB_Audio-00"
device.nick = "USB Audio"
device.plugged.usec = "8353136"
device.product.id = "0x0a08"
device.product.name = "USB Audio"
device.serial = "Generic_USB_Audio"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/sound/card2"
device.vendor.id = "0x26ce"
device.vendor.name = "Generic"
spa.object.id = "6"
device.string = "2"
Ports:
[In] Mic2: Front Microphone (type: Mic, priority: 400, availability group: Front Mic - Input, availability unknown)
Active Port: [In] Mic2
Formats:
pcm
Source #63
State: SUSPENDED
Name: alsa_input.usb-Generic_USB_Audio-00.HiFi__Mic1__source
Description: USB Audio Rear Input
Driver: PipeWire
Sample Specification: s24le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 41350 / 63% / -12.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "2"
alsa.card_name = "USB Audio"
alsa.class = "generic"
alsa.components = "USB26ce:0a08"
alsa.device = "0"
alsa.driver_name = "snd_usb_audio"
alsa.id = "USB Audio"
alsa.long_card_name = "Generic USB Audio at usb-0000:00:14.0-6, high speed"
alsa.mixer_device = "_ucm0003.hw:Audio"
alsa.mixer_name = "USB Mixer"
alsa.name = "USB Audio"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "Generic USB Audio at usb-0000:00:14.0-6, high speed"
api.alsa.card.name = "USB Audio"
api.alsa.open.ucm = "true"
api.alsa.path = "hw:Audio,0"
api.alsa.pcm.card = "2"
api.alsa.pcm.stream = "capture"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "14"
device.api = "alsa"
device.class = "sound"
device.icon_name = "audio-input-microphone"
device.id = "46"
device.profile.description = "Rear Input"
device.profile.name = "HiFi: Mic1: source"
device.routes = "1"
factory.name = "api.alsa.pcm.source"
media.class = "Audio/Source"
device.description = "USB Audio"
node.name = "alsa_input.usb-Generic_USB_Audio-00.HiFi__Mic1__source"
node.nick = "USB Audio"
node.pause-on-idle = "false"
object.path = "alsa:acp:Audio:14:capture"
port.group = "capture"
priority.driver = "2000"
priority.session = "2000"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "40"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "53"
object.serial = "63"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "2"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio2"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "usb"
device.bus-id = "usb-Generic_USB_Audio-00"
device.bus_path = "pci-0000:00:14.0-usb-0:6:1.0"
device.enum.api = "udev"
device.name = "alsa_card.usb-Generic_USB_Audio-00"
device.nick = "USB Audio"
device.plugged.usec = "8353136"
device.product.id = "0x0a08"
device.product.name = "USB Audio"
device.serial = "Generic_USB_Audio"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/sound/card2"
device.vendor.id = "0x26ce"
device.vendor.name = "Generic"
spa.object.id = "6"
device.string = "2"
Ports:
[In] Mic1: Rear Input (type: Mic, priority: 300, availability group: Mic - Input, available)
Active Port: [In] Mic1
Formats:
pcmpactl list cards
Card #46
Name: alsa_card.pci-0000_01_00.1
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.card.longname = "HDA NVidia at 0x84080000 irq 17"
api.alsa.card.name = "HDA NVidia"
api.alsa.path = "hw:1"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
api.dbus.ReserveDevice1.Priority = "-20"
device.api = "alsa"
device.bus = "pci"
device.bus_path = "pci-0000:01:00.1"
device.description = "GA104 High Definition Audio Controller"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_01_00.1"
device.nick = "HDA NVidia"
device.plugged.usec = "4850252"
device.product.id = "0x228b"
device.product.name = "GA104 High Definition Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.vendor.id = "0x10de"
device.vendor.name = "NVIDIA Corporation"
media.class = "Audio/Device"
spa.object.id = "4"
factory.id = "15"
client.id = "40"
object.id = "45"
object.serial = "46"
object.path = "alsa:acp:NVidia"
alsa.card = "1"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0x84080000 irq 17"
alsa.driver_name = "snd_hda_intel"
alsa.mixer_name = "Nvidia GPU 9e HDMI/DP"
alsa.components = "HDA:10de009e,38424663,00100100"
alsa.id = "NVidia"
device.string = "1"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: yes)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: yes)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
pro-audio: Pro Audio (sinks: 4, sources: 0, priority: 1, available: yes)
Active Profile: output:hdmi-stereo
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 1"
device.icon_name = "video-display"
card.profile.port = "0"
device.product.name = "LG ULTRAWIDE"
iec958.codecs.detected = "[\"PCM\"]"
Part of profile(s): output:hdmi-stereo
hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 2"
device.icon_name = "video-display"
card.profile.port = "1"
device.product.name = "BenQ GW2480"
iec958.codecs.detected = "[\"PCM\"]"
Part of profile(s): output:hdmi-stereo-extra1
hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 3"
device.icon_name = "video-display"
card.profile.port = "2"
Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 4"
device.icon_name = "video-display"
card.profile.port = "3"
Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3
Card #47
Name: alsa_card.usb-Generic_USB_Audio-00
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "2"
api.alsa.card.longname = "Generic USB Audio at usb-0000:00:14.0-6, high speed"
api.alsa.card.name = "USB Audio"
api.alsa.path = "hw:2"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio2"
api.dbus.ReserveDevice1.Priority = "-20"
device.api = "alsa"
device.bus = "usb"
device.bus-id = "usb-Generic_USB_Audio-00"
device.bus_path = "pci-0000:00:14.0-usb-0:6:1.0"
device.description = "USB Audio"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-usb"
device.name = "alsa_card.usb-Generic_USB_Audio-00"
device.nick = "USB Audio"
device.plugged.usec = "8353136"
device.product.id = "0x0a08"
device.product.name = "USB Audio"
device.serial = "Generic_USB_Audio"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/sound/card2"
device.vendor.id = "0x26ce"
device.vendor.name = "Generic"
media.class = "Audio/Device"
spa.object.id = "6"
factory.id = "15"
client.id = "40"
object.id = "46"
object.serial = "47"
object.path = "alsa:acp:Audio"
alsa.card = "2"
alsa.card_name = "USB Audio"
alsa.long_card_name = "Generic USB Audio at usb-0000:00:14.0-6, high speed"
alsa.driver_name = "snd_usb_audio"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB26ce:0a08"
alsa.id = "Audio"
device.string = "2"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
HiFi: HiFi 2.0 channels (sinks: 3, sources: 2, priority: 9300, available: yes)
HiFi 7+1: HiFi 7.1 channels (sinks: 3, sources: 2, priority: 1300, available: yes)
HiFi 5+1: HiFi 5.1 channels (sinks: 3, sources: 2, priority: 1300, available: yes)
pro-audio: Pro Audio (sinks: 4, sources: 2, priority: 1, available: yes)
Active Profile: HiFi
Ports:
[Out] SPDIF: S/PDIF Output (type: SPDIF, priority: 100, latency offset: 0 usec, availability unknown)
Properties:
port.type = "spdif"
device.icon_name = "audio-speakers"
card.profile.port = "0"
Part of profile(s): HiFi 7+1, HiFi 5+1, HiFi
[Out] Headphones: Front Headphones (type: Headphones, priority: 300, latency offset: 0 usec, availability group: Headphone - Output, not available)
Properties:
port.type = "headphones"
port.availability-group = "Headphone - Output"
device.icon_name = "audio-headphones"
card.profile.port = "1"
Part of profile(s): HiFi 7+1, HiFi 5+1, HiFi
[Out] Speaker: Speakers (type: Speaker, priority: 200, latency offset: 0 usec, availability group: Speaker - Output, available)
Properties:
port.type = "speaker"
port.availability-group = "Speaker - Output"
device.icon_name = "audio-speakers"
card.profile.port = "2"
Part of profile(s): HiFi 7+1, HiFi 5+1, HiFi
[In] Mic2: Front Microphone (type: Mic, priority: 400, latency offset: 0 usec, availability group: Front Mic - Input, availability unknown)
Properties:
port.type = "mic"
port.availability-group = "Front Mic - Input"
device.icon_name = "audio-input-microphone"
card.profile.port = "3"
Part of profile(s): HiFi 7+1, HiFi 5+1, HiFi
[In] Mic1: Rear Input (type: Mic, priority: 300, latency offset: 0 usec, availability group: Mic - Input, available)
Properties:
port.type = "mic"
port.availability-group = "Mic - Input"
device.icon_name = "audio-input-microphone"
card.profile.port = "4"
Part of profile(s): HiFi 7+1, HiFi 5+1, HiFiaplay -lL
null
Discard all samples (playback) or generate zero samples (capture)
lavrate
Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
Rate Converter Plugin Using Samplerate Library
speexrate
Rate Converter Plugin Using Speex Resampler
jack
JACK Audio Connection Kit
oss
Open Sound System
pipewire
PipeWire Sound Server
pulse
PulseAudio Sound Server
speex
Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
Plugin for channel upmix (4,6,8)
vdownmix
Plugin for channel downmix (stereo) with a simple spacialization
default
Default ALSA Output (currently PipeWire Media Server)
front:CARD=PCH
Front output / input
surround21:CARD=PCH
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
usbstream:CARD=PCH
HDA Intel PCH
USB Stream Output
hdmi:CARD=NVidia,DEV=0
HDA NVidia, LG ULTRAWIDE
HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
HDA NVidia, BenQ GW2480
HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
HDA NVidia, HDMI 2
HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
HDA NVidia, HDMI 3
HDMI Audio Output
usbstream:CARD=NVidia
HDA NVidia
USB Stream Output
sysdefault:CARD=Audio
USB Audio, USB Audio
Default Audio Device
front:CARD=Audio,DEV=0
USB Audio, USB Audio
Front output / input
surround21:CARD=Audio,DEV=0
USB Audio, USB Audio
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Audio,DEV=0
USB Audio, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Audio,DEV=0
USB Audio, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Audio,DEV=0
USB Audio, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Audio,DEV=0
USB Audio, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Audio,DEV=0
USB Audio, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Audio,DEV=0
USB Audio, USB Audio
IEC958 (S/PDIF) Digital Audio Output
iec958:CARD=Audio,DEV=1
USB Audio, USB Audio #1
IEC958 (S/PDIF) Digital Audio Output
usbstream:CARD=Audio
USB Audio
USB Stream Output
**** List of PLAYBACK Hardware Devices ****
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [LG ULTRAWIDE]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [BenQ GW2480]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: Audio [USB Audio], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: Audio [USB Audio], device 1: USB Audio [USB Audio #1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: Audio [USB Audio], device 2: USB Audio [USB Audio #2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: Audio [USB Audio], device 3: USB Audio [USB Audio #3]
Subdevices: 0/1
Subdevice #0: subdevice #0amixer -c1
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',2
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',3
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]dmesg | grep -iE 'snd|usb'
[ 0.010414] ACPI: SSDT 0x0000000044DE8000 00190A (v02 ALASKA UsbCTabl 00001000 INTL 20200717)
[ 0.601947] ACPI: bus type USB registered
[ 0.601947] usbcore: registered new interface driver usbfs
[ 0.601947] usbcore: registered new interface driver hub
[ 0.601947] usbcore: registered new device driver usb
[ 0.744943] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.746368] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.746370] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
[ 0.746404] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[ 0.746406] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.746407] usb usb1: Product: xHCI Host Controller
[ 0.746409] usb usb1: Manufacturer: Linux 6.14.3-arch1-1 xhci-hcd
[ 0.746410] usb usb1: SerialNumber: 0000:00:14.0
[ 0.746544] hub 1-0:1.0: USB hub found
[ 0.748849] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[ 0.748851] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.748852] usb usb2: Product: xHCI Host Controller
[ 0.748853] usb usb2: Manufacturer: Linux 6.14.3-arch1-1 xhci-hcd
[ 0.748854] usb usb2: SerialNumber: 0000:00:14.0
[ 0.748912] hub 2-0:1.0: USB hub found
[ 0.750424] xhci_hcd 0000:3a:00.0: new USB bus registered, assigned bus number 3
[ 0.751898] xhci_hcd 0000:3a:00.0: new USB bus registered, assigned bus number 4
[ 0.751900] xhci_hcd 0000:3a:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.751924] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[ 0.751926] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.751927] usb usb3: Product: xHCI Host Controller
[ 0.751928] usb usb3: Manufacturer: Linux 6.14.3-arch1-1 xhci-hcd
[ 0.751929] usb usb3: SerialNumber: 0000:3a:00.0
[ 0.751999] hub 3-0:1.0: USB hub found
[ 0.752100] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[ 0.752101] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.752102] usb usb4: Product: xHCI Host Controller
[ 0.752103] usb usb4: Manufacturer: Linux 6.14.3-arch1-1 xhci-hcd
[ 0.752104] usb usb4: SerialNumber: 0000:3a:00.0
[ 0.752157] hub 4-0:1.0: USB hub found
[ 0.752250] usbcore: registered new interface driver usbserial_generic
[ 0.752254] usbserial: USB Serial support registered for generic
[ 0.987785] usb 1-6: new high-speed USB device number 2 using xhci_hcd
[ 2.695232] usb 1-6: New USB device found, idVendor=26ce, idProduct=0a08, bcdDevice= 0.02
[ 2.695248] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 2.695254] usb 1-6: Product: USB Audio
[ 2.695258] usb 1-6: Manufacturer: Generic
[ 2.830794] usb 1-7: new high-speed USB device number 3 using xhci_hcd
[ 2.955405] usb 1-7: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=60.52
[ 2.955420] usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.955426] usb 1-7: Product: USB2.0 Hub
[ 2.957473] hub 1-7:1.0: USB hub found
[ 3.074747] usb 1-13: new full-speed USB device number 4 using xhci_hcd
[ 3.199843] usb 1-13: New USB device found, idVendor=26ce, idProduct=01a2, bcdDevice= 0.00
[ 3.199858] usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.199864] usb 1-13: Product: LED Controller
[ 3.199869] usb 1-13: Manufacturer: ASRock
[ 3.199873] usb 1-13: SerialNumber: A02019100900
[ 3.215936] usbcore: registered new interface driver usbhid
[ 3.215945] usbhid: USB HID core driver
[ 3.227008] hid-generic 0003:26CE:0A08.0001: hiddev96,hidraw0: USB HID v1.11 Device [Generic USB Audio] on usb-0000:00:14.0-6/input6
[ 3.227231] input: ASRock LED Controller as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.0/0003:26CE:01A2.0002/input/input3
[ 3.261835] usb 1-7.1: new full-speed USB device number 5 using xhci_hcd
[ 3.278399] hid-generic 0003:26CE:01A2.0002: input,hidraw1: USB HID v1.10 Device [ASRock LED Controller] on usb-0000:00:14.0-13/input0
[ 3.339755] usb 1-7.1: New USB device found, idVendor=046d, idProduct=c548, bcdDevice= 5.01
[ 3.339769] usb 1-7.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.339775] usb 1-7.1: Product: USB Receiver
[ 3.339779] usb 1-7.1: Manufacturer: Logitech
[ 3.349832] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.1/1-7.1:1.0/0003:046D:C548.0003/input/input4
[ 3.441099] hid-generic 0003:046D:C548.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-7.1/input0
[ 3.443617] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.1/1-7.1:1.1/0003:046D:C548.0004/input/input5
[ 3.443886] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.1/1-7.1:1.1/0003:046D:C548.0004/input/input6
[ 3.495120] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.1/1-7.1:1.1/0003:046D:C548.0004/input/input7
[ 3.495565] hid-generic 0003:046D:C548.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-7.1/input1
[ 3.498129] hid-generic 0003:046D:C548.0005: hiddev97,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-7.1/input2
[ 3.560798] usb 1-7.2: new full-speed USB device number 6 using xhci_hcd
[ 3.637476] usb 1-7.2: New USB device found, idVendor=046d, idProduct=c246, bcdDevice=70.02
[ 3.637491] usb 1-7.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.637496] usb 1-7.2: Product: Gaming Mouse G300
[ 3.637500] usb 1-7.2: Manufacturer: Logitech
[ 3.645346] input: Logitech Gaming Mouse G300 as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.2/1-7.2:1.0/0003:046D:C246.0006/input/input8
[ 3.645674] hid-generic 0003:046D:C246.0006: input,hidraw5: USB HID v1.10 Mouse [Logitech Gaming Mouse G300] on usb-0000:00:14.0-7.2/input0
[ 3.648352] input: Logitech Gaming Mouse G300 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.2/1-7.2:1.1/0003:046D:C246.0007/input/input9
[ 3.699111] input: Logitech Gaming Mouse G300 as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.2/1-7.2:1.1/0003:046D:C246.0007/input/input10
[ 3.699651] hid-generic 0003:046D:C246.0007: input,hiddev98,hidraw6: USB HID v1.10 Keyboard [Logitech Gaming Mouse G300] on usb-0000:00:14.0-7.2/input1
[ 4.818532] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 4.818859] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 4.818921] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 4.818924] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 4.822895] snd_hda_intel 0000:00:1f.3: no codecs found!
[ 8.356198] usbcore: registered new interface driver snd-usb-audioLast edited by Jeff_WuYo (2025-04-21 23:19:10)
Offline
After tested in fedora 42 live, kernel 6.14, it suddenly works again on my arch install. Somehow, not very consistent.
Update: It doesn't work properly again.
Last edited by Jeff_WuYo (2025-04-21 23:19:56)
Offline
Selecting Pro Audio in Pavucontrol solved it for me, don't ask why. https://bbs.archlinux.org/viewtopic.php?id=303988
Offline
Welp, setting to Pro Audio didn't work for me, but changing it back and forth makes mic work somehow.
Offline
Pages: 1