You are not logged in.
Pages: 1
I just put archlinux on a new Dell machine.
If I bring up plasma on Wayland, I get a usableable system, including the KDE window manager -- but the display is just the upper left corner of the screen. The display configuration window says the 1024x768 is the only resolution for this display (which it isn't -- it's 1920x1080). I've tried creating a new mode using xrandr, and creating a file in xorg.conf.d -- both failed.
If I bring up plasma on X11, I get a full-screen display, and the display configuration window shows a whole list of resolutions available -- but no window manager and various other problems (like it won't log out).
Any help appreciated, of course. Thanks in advance.
Last edited by dhs (2026-11-08 21:13:47)
Offline
what hardware EXACTLY?
most important:
- desktop or laptop?
- igpu or dgpu?
- nvidia? which one? which package?
Offline
It's a Dell Optiplex 7040 mini tower. Intel Core i3 processor. PCI Express x16 graphics adapter.
I think there are two different problems. Wayland X misreads the monitor's data. X11 fails to load a window manager.
Offline
I thought KDE removed support for x11 sessions?
Anyways:
kscreen-doctor --outputsIt should list the name of each connected display (such as DP-1, HDMI-A-1), all modes it supports (if EDID is not read correctly, the list will be incomplete or contain only 1024x768), and the currently used mode...
And if your monitor's correct mode appears in the list (for example, numbered 0:1920x1080@60), you can force the setting using:
kscreen-doctor output.<output name>.mode.<mode number>Edit:
run inxi -G or lspci -k | grep -A 2 -E "(VGA|3D)"
Does the journal show anything spicy?
Last edited by 5hridhyan (2026-11-01 05:52:03)
Gentoo is where dreams and compile times go to die.
And you'll definitely find me talking to a wall :-)
Offline
Smells like you're running on the simplydumb device
PCI Express x16 graphics adapter.
Ok, but which one?
While lspci will answer that, just post your complete system journal for the boot:
sudo journalctl -b | nc termbin.com 9999so we'll know what's going on on your system…
Offline
I've been away for a couple days, so I apologize for the delay.
The journalctl output is at termbin.com/5plr
kscreen-doctor --outputs returns just the default resolution 1024x768.
The lspci output is:
VGA compatible controller: Intel Corporation Skylake-S GT2 [HD Graphics 530] (rev06)
DeviceName: Intel HD Graphics
Subsystem: Dell Device 06b9
Last edited by dhs (2026-11-07 01:32:31)
Offline
Please use [code][/code] tags. Edit your post in this regard.
Nov 06 17:16:32 freddy kwin_wayland[557]: No backend specified, automatically choosing X11 because DISPLAY is setHow exactly are you starting KDE and why is the DISPLAY environment set?
Offline
I have so far not been able to find out what is setting DISPLAY. Interestingly, if I put "unset DISPLAY" in .xinitrc and then restart X, the screen just stays blank.
I start KDE by putting "exec /usr/bin/startplasma-wayland" in .xinitrc
On my old archlinux system, "exec /usr/bin/startplasma-x11" works fine.
Last edited by dhs (2026-11-07 20:41:50)
Offline
I start KDE by putting "exec /usr/bin/startplasma-wayland" in .xinitrc
Yeah, no.
1st the xinitrc is broken, second you most certainly won't run a wayland session out of X11
=> https://wiki.archlinux.org/title/KDE#From_the_console
Offline
Okay -- that works.
I did what I did because that's how my old system works, and I looked at the ArchWiki "xinit" page.
Thanks very much for your help -- and your patience.
Offline
Didn't take much patience ![]()
Please always remember to mark resolved threads by editing your initial posts subject - so others will know that there's no task left, but maybe a solution to find.
Thanks.
In case you wonder why the xinitrc was never really correct, see the last link below.
Also startx is actually what set DISPLAY (it starts an X11 server, sets the environment and then runs the xinitrc script inside the already started X11 server)
Offline
Everything is working fine -- except for one little glitch. I set the "Session Restore" to "When session was manually saved". I set up four virtual desktops, put an app in each, and manually saved the session. But when I log out and back in, all the apps pile up in Desktop 1. There must be one more step I've missed.
Offline
The session restoring protocol in wayland is still very much WIP, despite https://www.phoronix.com/news/KDE-Wayla … on-Restore I guess you're hitting https://bugs.kde.org/show_bug.cgi?id=348047
Offline
Pages: 1