You are not logged in.

#1 2008-03-01 17:01:01

deepnote
Member
Registered: 2008-01-02
Posts: 21

random freeze

Hi,
I have Asus A6M Q0050 and last three weeks I experience random freezes.

  Kernel     : 2.6.24-ARCH
  CPU & Cache: Processor 0: Mobile AMD Sempron(tm) Processor 3400+ 1808MHz, 256 KB Cache

  Sound(a)   : MCP51 High Definition Audio module: snd-hda-intel
/etc/hwd/pci.hw: line 62: Co-processor_NAME=MCP51 PMU: command not found
/etc/hwd/pci.hw: line 63: Co-processor_MODULE=-: command not found
/etc/hwd/pci.hw: line 64: Co-processor_ID=10de:0271: command not found
/etc/hwd/pci.hw: line 62: Co-processor_NAME=MCP51 PMU: command not found
/etc/hwd/pci.hw: line 63: Co-processor_MODULE=-: command not found
/etc/hwd/pci.hw: line 64: Co-processor_ID=10de:0271: command not found
  Video      : MCP51 PCI-X GeForce Go 6100 server: Xorg (vesa)
  Driver     : xf86-video-vesa   module: -
  Monitor    : Generic Monitor  H: 28.0-96.0kHz V: 50.0-75.0Hz
  Mouse      : Touch Pad xtype: IMPS2 device: /dev/input/mice
  HDD        : MCP51 IDE module: pata_amd
  USB        : MCP51 USB Controller module: ehci_hcd
  Flash Drive: M-Systems Flash Disk Pioneers
  SD Slot    : R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter module: sdhci

  Ethernet   : RTL8111/8168B PCI Express Gigabit Ethernet controller module: r8169
  Network    : BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller module: ndiswrapper
/etc/hwd/pci.hw: line 62: Co-processor_NAME=MCP51 PMU: command not found
/etc/hwd/pci.hw: line 63: Co-processor_MODULE=-: command not found
/etc/hwd/pci.hw: line 64: Co-processor_ID=10de:0271: command not found
  Firewire   : R5C552 IEEE 1394 Controller  module: ohci1394
  PCMCIA slot: RL5c476 II module: yenta_cardbus

lsmod

Module                  Size  Used by
nvidia               8846660  26
joydev                 12160  0
pcmcia                 37536  0
firewire_ohci          18944  0
firewire_core          42048  1 firewire_ohci
crc_itu_t               2688  1 firewire_core
yenta_socket           25868  1
rsrc_nonstatic         11264  1 yenta_socket
pcmcia_core            37796  3 pcmcia,yenta_socket,rsrc_nonstatic
sdhci                  17796  0
ohci1394               31412  0
mmc_core               50568  1 sdhci
ieee1394               91352  1 ohci1394
serio_raw               6788  0
psmouse                42652  0
rtc_cmos                9016  0
rtc_core               18828  1 rtc_cmos
rtc_lib                 3584  1 rtc_core
pcspkr                  3584  0
k8temp                  5888  0
i2c_nforce2             6784  0
i2c_core               22528  2 nvidia,i2c_nforce2
video                  19348  0
output                  4096  1 video
sg                     32024  0
evdev                  11776  6
thermal                16032  0
processor              33688  2 thermal
fan                     5000  0
button                  8224  0
battery                13320  0
ac                      5896  0
ndiswrapper           240640  0
snd_seq_oss            33408  0
snd_seq_midi_event      7936  1 snd_seq_oss
snd_seq                55936  4 snd_seq_oss,snd_seq_midi_event
snd_seq_device          7956  2 snd_seq_oss,snd_seq
snd_pcm_oss            42400  0
snd_mixer_oss          17024  1 snd_pcm_oss
snd_hda_intel         374568  5
snd_pcm                82312  3 snd_pcm_oss,snd_hda_intel
snd_timer              22536  3 snd_seq,snd_pcm
snd_page_alloc          9232  2 snd_hda_intel,snd_pcm
snd_hwdep               9096  1 snd_hda_intel
snd                    57320  17 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep
soundcore               8096  1 snd
r8169                  29700  0
ext3                  134928  2
jbd                    53288  1 ext3
mbcache                 8704  1 ext3
aes_x86_64             26152  2
aes_generic            26944  0
lrw                     4352  2
gf128mul                8576  1 lrw
usb_storage            93248  0
dm_crypt               13192  1
dm_mod                 60152  5 dm_crypt
sd_mod                 25216  4
sr_mod                 16932  0
cdrom                  37672  1 sr_mod
ehci_hcd               36620  0
ohci_hcd               23684  0
pata_acpi               6784  0
usbcore               148272  5 ndiswrapper,usb_storage,ehci_hcd,ohci_hcd
vfat                   12800  0
fat                    52272  1 vfat
nls_cp437               7552  0
ata_generic             6916  0
pata_amd               13188  3
libata                153392  3 pata_acpi,ata_generic,pata_amd

error.log

Mar  1 07:24:36 mujnotas PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
Mar  1 07:24:36 mujnotas PCI: Not using MMCONFIG.
Mar  1 07:24:36 mujnotas sd 2:0:0:0: [sdb] Assuming drive cache: write through
Mar  1 07:24:36 mujnotas sd 2:0:0:0: [sdb] Assuming drive cache: write through
Mar  1 07:50:43 mujnotas sudo: pam_unix(sudo:auth): conversation failed
Mar  1 11:33:29 mujnotas NetworkManager: nm_device_is_802_3_ethernet: assertion `dev != NULL' failed
Mar  1 11:33:29 mujnotas NetworkManager: nm_device_is_802_11_wireless: assertion `dev != NULL' failed
Mar  1 13:09:36 mujnotas PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
Mar  1 13:09:36 mujnotas PCI: Not using MMCONFIG.
Mar  1 13:09:36 mujnotas sd 2:0:0:0: [sdb] Assuming drive cache: write through
Mar  1 13:09:36 mujnotas sd 2:0:0:0: [sdb] Assuming drive cache: write through
Mar  1 14:59:29 mujnotas PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
Mar  1 14:59:29 mujnotas PCI: Not using MMCONFIG.
Mar  1 14:59:29 mujnotas sd 2:0:0:0: [sdb] Assuming drive cache: write through
Mar  1 14:59:29 mujnotas sd 2:0:0:0: [sdb] Assuming drive cache: write through
Mar  1 15:56:21 mujnotas NetworkManager: nm_device_is_802_3_ethernet: assertion `dev != NULL' failed
Mar  1 15:56:21 mujnotas NetworkManager: nm_device_is_802_11_wireless: assertion `dev != NULL' failed
Mar  1 16:09:02 mujnotas NetworkManager: nm_device_is_802_3_ethernet: assertion `dev != NULL' failed
Mar  1 16:09:02 mujnotas NetworkManager: nm_device_is_802_11_wireless: assertion `dev != NULL' failed
Mar  1 16:22:37 mujnotas PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
Mar  1 16:22:37 mujnotas PCI: Not using MMCONFIG.
Mar  1 16:22:37 mujnotas sd 2:0:0:0: [sdb] Assuming drive cache: write through
Mar  1 16:22:37 mujnotas sd 2:0:0:0: [sdb] Assuming drive cache: write through
Mar  1 17:21:40 mujnotas PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
Mar  1 17:21:40 mujnotas PCI: Not using MMCONFIG.
Mar  1 17:21:40 mujnotas sd 2:0:0:0: [sdb] Assuming drive cache: write through
Mar  1 17:21:40 mujnotas sd 2:0:0:0: [sdb] Assuming drive cache: write through
Mar  1 17:32:22 mujnotas PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
Mar  1 17:32:22 mujnotas PCI: Not using MMCONFIG.
Mar  1 17:32:22 mujnotas sd 2:0:0:0: [sdb] Assuming drive cache: write through
Mar  1 17:32:22 mujnotas sd 2:0:0:0: [sdb] Assuming drive cache: write through

dmesg.log

Linux version 2.6.24-ARCH (root@artin) (gcc version 4.2.3) #1 SMP PREEMPT Tue Feb 26 23:47:57 CET 2008
Command line: root=/dev/sda3 ro vga=773 noacpi cryptkey=/dev/usbecko1:vfat:/secretkey
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000037fc0000 (usable)
 BIOS-e820: 0000000037fc0000 - 0000000037fce000 (ACPI data)
 BIOS-e820: 0000000037fce000 - 0000000037ff0000 (ACPI NVS)
 BIOS-e820: 0000000037ff0000 - 0000000038000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
 BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 229312) 1 entries of 256 used
end_pfn_map = 1048576
DMI present.
ACPI: RSDP 000FBB40, 0014 (r0 ACPIAM)
ACPI: RSDT 37FC0000, 003C (r1 _ASUS_ Notebook  2000705 MSFT       97)
ACPI: FACP 37FC0200, 0084 (r2 A_M_I_ OEMFACP   2000705 MSFT       97)
ACPI: DSDT 37FC05C0, 6D77 (r1  A0502 A0502000        0 INTL 20060113)
ACPI: FACS 37FCE000, 0040
ACPI: APIC 37FC0390, 0070 (r1 A_M_I_ OEMAPIC   2000705 MSFT       97)
ACPI: MCFG 37FC0400, 003C (r1 A_M_I_ OEMMCFG   2000705 MSFT       97)
ACPI: SLIC 37FC0440, 0176 (r1 _ASUS_ Notebook  2000705 MSFT       97)
ACPI: OEMB 37FCE040, 0060 (r1 A_M_I_ AMI_OEM   2000705 MSFT       97)
ACPI: HPET 37FC7340, 0038 (r1 A_M_I_ OEMHPET0  2000705 MSFT       97)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 229312) 1 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0:        0 ->      159
    0:      256 ->   229312
On node 0 totalpages: 229215
  DMA zone: 56 pages used for memmap
  DMA zone: 1205 pages reserved
  DMA zone: 2738 pages, LIFO batch:0
  DMA32 zone: 3079 pages used for memmap
  DMA32 zone: 222137 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 38000000:c6c00000)
SMP: Allowing 2 CPUs, 1 hotplug CPUs
PERCPU: Allocating 33200 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 224875
Kernel command line: root=/dev/sda3 ro vga=773 noacpi cryptkey=/dev/usbecko1:vfat:/secretkey
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
hpet clockevent registered
TSC calibrated against HPET
time.c: Detected 1808.229 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
CPU 0: aperture @ a010000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 894880k/917248k available (2821k kernel code, 21588k reserved, 1097k data, 264k init)
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 3620.69 BogoMIPS (lpj=6031511)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
SMP alternatives: switching to UP code
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... successfully read 27976 bytes from /DSDT.aml.
ACPI: Table DSDT replaced by host OS
ACPI: DSDT 00000000, 6D48 (r1  A0502 A0502000        0 INTL 20061109)
ACPI: DSDT override uses original SSDTs unless "acpi_no_auto_ssdt"<6>Using local APIC timer interrupts.
APIC timer calibration result 12557137
Detected 12.557 MHz APIC timer.
Brought up 1 CPUs
net_namespace: 120 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x20, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:10.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *5
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *5
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x800-0x80f has been reserved
system 00:08: ioport range 0x500-0x57f has been reserved
system 00:08: ioport range 0x580-0x5ff has been reserved
system 00:08: ioport range 0x800-0x87f could not be reserved
system 00:08: ioport range 0x880-0x8ff has been reserved
system 00:08: ioport range 0x900-0x97f has been reserved
system 00:08: ioport range 0x980-0x9ff has been reserved
system 00:08: ioport range 0x2000-0x207f has been reserved
system 00:08: ioport range 0x2080-0x20ff has been reserved
system 00:08: iomem range 0x0-0x0 could not be reserved
system 00:08: iomem range 0xfee01000-0xfeefffff has been reserved
system 00:08: iomem range 0x38000000-0x3fffffff has been reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xcffff has been reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0x37ffffff could not be reserved
system 00:0c: iomem range 0xe0000000-0xffffffff could not be reserved
PCI: Bridge: 0000:00:02.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
  IO window: d000-dfff
  MEM window: df600000-df6fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bus 5, cardbus bridge: 0000:04:01.0
  IO window: 0000e000-0000e0ff
  IO window: 0000e400-0000e4ff
  PREFETCH window: 40000000-43ffffff
  MEM window: 44000000-47ffffff
PCI: Bridge: 0000:00:10.0
  IO window: e000-efff
  MEM window: df700000-dfffffff
  PREFETCH window: db000000-dcffffff
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:10.0 to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
ACPI: PCI Interrupt 0000:04:01.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 19
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Switched to high resolution mode on CPU 0
Freeing initrd memory: 2538k freed
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:05.0
0000:00:0b.0 OHCI: BIOS handoff failed (BIOS bug ?) 000007b4
0000:00:0b.1 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20000080000, using 1536k, total 131072k
vesafb: mode is 1024x768x8, linelength=1024, pages=3
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Freeing unused kernel memory: 264k freed
libata version 3.00 loaded.
pata_amd 0000:00:0d.0: version 0.3.10
PCI: Setting latency timer of device 0000:00:0d.0 to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PR03, max UDMA/33
ata1.00: configured for UDMA/33
ata2.00: ATA-7: Hitachi HTS541210H9AT00, HPBOA23C, max UDMA/100
ata2.00: 195371568 sectors, multi 16: LBA48 
ata2.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T10N  PR03 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access     ATA      Hitachi HTS54121 HPBO PQ: 0 ANSI: 5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Driver 'sd' needs updating - please use bus_type methods
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0b.1[b] -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:0b.1 to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:0b.1
ehci_hcd 0000:00:0b.1: irq 23, io mem 0xdf5dfc00
sd 1:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 1:0:0:0: [sda] Write Protect is off
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:<4>Driver 'sr' needs updating - please use bus_type methods
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
 sda1 sda2 sda3 sda4
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sd 1:0:0:0: [sda] Attached SCSI disk
sr 0:0:0:0: Attached scsi CD-ROM sr0
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:0b.0 to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 22, io mem 0xdf5de000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
usb 1-4: new high speed USB device using ehci_hcd and address 3
usb 1-4: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
usb 2-2: new low speed USB device using ohci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver hiddev
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.0/input/input2
input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:0b.0-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
scsi 2:0:0:0: Direct-Access     Kingston DataTraveler 2.0 6.16 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sdb] 244735 512-byte hardware sectors (125 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 08
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 244735 512-byte hardware sectors (125 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 08
sd 2:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
usb-storage: device scan complete
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNEA] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:02:00.0 to 64
r8169 0000:02:00.0: no MSI. Back to INTx.
eth0: RTL8168b/8111b at 0xffffc2000001c000, 00:18:f3:91:68:ea, XID 38000000 IRQ 18
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:10.1[b] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:10.1 to 64
hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...
ndiswrapper version 1.52 loaded (smp=yes, preempt=yes)
ndiswrapper (link_pe_images:576): fixing KI_USER_SHARED_DATA address in the driver
ndiswrapper: driver bcmwl5 (Broadcom,03/23/2006, 4.40.19.0) loaded
ACPI: PCI Interrupt 0000:04:03.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 19
ndiswrapper: using IRQ 19
wlan0: ethernet device 00:18:f3:ab:c8:10 using NDIS driver: bcmwl5, version: 0x4281300, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4318.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
usbcore: registered new interface driver ndiswrapper
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /devices/virtual/input/input3
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /devices/virtual/input/input4
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /devices/virtual/input/input5
ACPI: Lid Switch [LID]
input: Power Button (CM) as /devices/virtual/input/input6
ACPI: Power Button (CM) [PWRB]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI: Thermal Zone [TZ00] (30 C)
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
Asus Laptop ACPI Extras version 0.30
  Error calling BSTS
  unsupported model A6M, trying default values
  send /proc/acpi/dsdt to the developers
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input7
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
input: PC Speaker as /devices/platform/pcspkr/input/input8
Yenta: CardBus bridge found at 0000:04:01.0 [1043:1367]
Yenta: ISA IRQ mask 0x0cb8, PCI irq 19
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#04) from #05 to #08
pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
pcmcia: parent PCI bridge Memory window: 0xdf700000 - 0xdfffffff
pcmcia: parent PCI bridge Memory window: 0xdb000000 - 0xdcffffff
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 17
ACPI: PCI Interrupt 0000:04:01.1[b] -> Link [LNKC] -> GSI 17 (level, low) -> IRQ 17
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17]  MMIO=[df7ff000-df7ff7ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
sdhci: SDHCI controller found at 0000:04:01.2 [1180:0822] (rev 17)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 16
ACPI: PCI Interrupt 0000:04:01.2[C] -> Link [LNKD] -> GSI 16 (level, low) -> IRQ 16
sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: SDHCI at 0xdf7ff800 irq 16 DMA
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e01800036efd88]
Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
rtc_cmos: probe of 00:02 failed with error -16
Marking TSC unstable due to TSC halts in idle
Time: hpet clocksource has been installed.
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1950380k swap on /dev/mapper/swap.  Priority:-1 extents:1 across:1950380k

I have tried: using "nv" instead of "nvidia", install all(kernel etc) from "testing" repository, pci=noacpi.


Asus A6M-Q050

Offline

#2 2008-03-02 12:30:07

rasat
Forum Fellow
From: Finland, working in Romania
Registered: 2002-12-27
Posts: 2,176
Website

Re: random freeze

deepnote wrote:
Sound(a)   : MCP51 High Definition Audio module: snd-hda-intel
/etc/hwd/pci.hw: line 62: Co-processor_NAME=MCP51 PMU: command not found
/etc/hwd/pci.hw: line 63: Co-processor_MODULE=-: command not found
/etc/hwd/pci.hw: line 64: Co-processor_ID=10de:0271: command not found
/etc/hwd/pci.hw: line 62: Co-processor_NAME=MCP51 PMU: command not found
/etc/hwd/pci.hw: line 63: Co-processor_MODULE=-: command not found
/etc/hwd/pci.hw: line 64: Co-processor_ID=10de:0271: command not found
  Video      : MCP51 PCI-X GeForce Go 6100 server: Xorg (vesa)
  Driver     : xf86-video-vesa   module: -

Can you paste here what's written in /etc/hwd/pci.hw. Also the result of 'lspci -nn'

Offline

#3 2008-03-02 14:38:02

deepnote
Member
Registered: 2008-01-02
Posts: 21

Re: random freeze

lspci -nn
00:00.0 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02f3] (rev a2)
00:00.1 RAM memory [0500]: nVidia Corporation C51 Memory Controller 0 [10de:02fa] (rev a2)
00:00.2 RAM memory [0500]: nVidia Corporation C51 Memory Controller 1 [10de:02fe] (rev a2)
00:00.3 RAM memory [0500]: nVidia Corporation C51 Memory Controller 5 [10de:02f8] (rev a2)
00:00.4 RAM memory [0500]: nVidia Corporation C51 Memory Controller 4 [10de:02f9] (rev a2)
00:00.5 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02ff] (rev a2)
00:00.6 RAM memory [0500]: nVidia Corporation C51 Memory Controller 3 [10de:027f] (rev a2)
00:00.7 RAM memory [0500]: nVidia Corporation C51 Memory Controller 2 [10de:027e] (rev a2)
00:02.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fc] (rev a1)
00:03.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fd] (rev a1)
00:04.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fb] (rev a1)
00:05.0 VGA compatible controller [0300]: nVidia Corporation MCP51 PCI-X GeForce Go 6100 [10de:0247] (rev a2)
00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270] (rev a2)
00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev a3)
00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a3)
00:0a.3 Co-processor [0b40]: nVidia Corporation MCP51 PMU [10de:0271] (rev a3)
00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026d] (rev a3)
00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026e] (rev a3)
00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev a1)
00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev a2)
00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio [10de:026c] (rev a2)
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
04:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
04:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 08)
04:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17)
04:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 08)
04:03.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
cat -n /etc/hwd/pci.hw            
                                                    
     1
     2  RAM_memory_NAME="C51 Host Bridge"
     3  RAM_memory_MODULE="-"
     4  RAM_memory_ID="10de:02f3"
     5
     6  RAM_memory_NAME="C51 Memory Controller 0"
     7  RAM_memory_MODULE="-"
     8  RAM_memory_ID="10de:02fa"
     9
    10  RAM_memory_NAME="C51 Memory Controller 1"
    11  RAM_memory_MODULE="-"
    12  RAM_memory_ID="10de:02fe"
    13
    14  RAM_memory_NAME="C51 Memory Controller 5"
    15  RAM_memory_MODULE="-"
    16  RAM_memory_ID="10de:02f8"
    17
    18  RAM_memory_NAME="C51 Memory Controller 4"
    19  RAM_memory_MODULE="-"
    20  RAM_memory_ID="10de:02f9"
    21
    22  RAM_memory_NAME="C51 Host Bridge"
    23  RAM_memory_MODULE="-"
    24  RAM_memory_ID="10de:02ff"
    25
    26  RAM_memory_NAME="C51 Memory Controller 3"
    27  RAM_memory_MODULE="-"
    28  RAM_memory_ID="10de:027f"
    29
    30  RAM_memory_NAME="C51 Memory Controller 2"
    31  RAM_memory_MODULE="-"
    32  RAM_memory_ID="10de:027e"
    33
    34  PCI_bridge_NAME="C51 PCI Express Bridge"
    35  PCI_bridge_MODULE="pcieport-driver"
    36  PCI_bridge_ID="10de:02fc"
    37
    38  PCI_bridge_NAME="C51 PCI Express Bridge"
    39  PCI_bridge_MODULE="pcieport-driver"
    40  PCI_bridge_ID="10de:02fd"
    41
    42  PCI_bridge_NAME="C51 PCI Express Bridge"
    43  PCI_bridge_MODULE="pcieport-driver"
    44  PCI_bridge_ID="10de:02fb"
    45
    46  VGA_compatible_controller_NAME="MCP51 PCI-X GeForce Go 6100"
    47  VGA_compatible_controller_MODULE="nvidia"
    48  VGA_compatible_controller_ID="10de:0247"
    49
    50  RAM_memory_NAME="MCP51 Host Bridge"
    51  RAM_memory_MODULE="-"
    52  RAM_memory_ID="10de:0270"
    53
    54  ISA_bridge_NAME="MCP51 LPC Bridge"
    55  ISA_bridge_MODULE="-"
    56  ISA_bridge_ID="10de:0260"
    57
    58  SMBus_NAME="MCP51 SMBus"
    59  SMBus_MODULE="nForce2_smbus"
    60  SMBus_ID="10de:0264"
    61
    62  Co-processor_NAME="MCP51 PMU"
    63  Co-processor_MODULE="-"
    64  Co-processor_ID="10de:0271"
    65
    66  USB_Controller_NAME="MCP51 USB Controller"
    67  USB_Controller_MODULE="ohci_hcd"
    68  USB_Controller_ID="10de:026d"
    69
    70  USB_Controller_NAME="MCP51 USB Controller"
    71  USB_Controller_MODULE="ehci_hcd"
    72  USB_Controller_ID="10de:026e"
    73
    74  IDE_interface_NAME="MCP51 IDE"
    75  IDE_interface_MODULE="pata_amd"
    76  IDE_interface_ID="10de:0265"
    77
    78  PCI_bridge_NAME="MCP51 PCI Bridge"
    79  PCI_bridge_MODULE="-"
    80  PCI_bridge_ID="10de:026f"
    81
    82  Audio_device_NAME="MCP51 High Definition Audio"
    83  Audio_device_MODULE="HDA Intel"
    84  Audio_device_ID="10de:026c"
    85
    86  Host_bridge_NAME="K8 [Athlon64/Opteron] HyperTransport Technology Configuration"
    87  Host_bridge_MODULE="-"
    88  Host_bridge_ID="1022:1100"
    89
    90  Host_bridge_NAME="K8 [Athlon64/Opteron] Address Map"
    91  Host_bridge_MODULE="-"
    92  Host_bridge_ID="1022:1101"
    93
    94  Host_bridge_NAME="K8 [Athlon64/Opteron] DRAM Controller"
    95  Host_bridge_MODULE="-"
    96  Host_bridge_ID="1022:1102"
    97
    98  Host_bridge_NAME="K8 [Athlon64/Opteron] Miscellaneous Control"
    99  Host_bridge_MODULE="k8temp"
   100  Host_bridge_ID="1022:1103"
   101
   102  Ethernet_controller_NAME="RTL8111/8168B PCI Express Gigabit Ethernet controller"
   103  Ethernet_controller_MODULE="r8169"
   104  Ethernet_controller_ID="10ec:8168"
   105
   106  CardBus_bridge_NAME="RL5c476 II"
   107  CardBus_bridge_MODULE="yenta_cardbus"
   108  CardBus_bridge_ID="1180:0476"
   109
   110  FireWire_IEEE_1394_NAME="R5C552 IEEE 1394 Controller"
   111  FireWire_IEEE_1394_MODULE="ohci1394"
   112  FireWire_IEEE_1394_ID="1180:0552"
   113
   114  SD_Host_controller_NAME="R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter"
   115  SD_Host_controller_MODULE="sdhci"
   116  SD_Host_controller_ID="1180:0822"
   117
   118  System_peripheral_NAME="R5C592 Memory Stick Bus Host Adapter"
   119  System_peripheral_MODULE="-"
   120  System_peripheral_ID="1180:0592"
   121
   122  Network_controller_NAME="BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller"
   123  Network_controller_MODULE="ndiswrapper"
   124  Network_controller_ID="14e4:4318"
   125

Asus A6M-Q050

Offline

#4 2008-03-03 08:37:33

rasat
Forum Fellow
From: Finland, working in Romania
Registered: 2002-12-27
Posts: 2,176
Website

Re: random freeze

Thanks for the input. With this I can fixed the bug in hwd.
Reading your vga card, I did a brief search in finding the vendor and device id (10de:0247). No useful hits. In this forum there is one using same card. If you don't get solved in this forum, contact Exclamation. His email is active.
http://bbs.archlinux.org/viewtopic.php?id=40223&p=3

Offline

#5 2008-03-04 07:31:35

deepnote
Member
Registered: 2008-01-02
Posts: 21

Re: random freeze

Thanks for reply. So you think the problem is in graphic card?


Asus A6M-Q050

Offline

#6 2008-06-01 16:28:01

gabell
Member
From: St. Petersburg, Russia
Registered: 2008-06-01
Posts: 6

Re: random freeze

Hi. I have the same notebook and the same problem. deepnote, did you try to boot with acpi=off option? I think problem is in acpi. Mail me please if you find the solution.

Offline

#7 2008-06-01 19:37:18

deepnote
Member
Registered: 2008-01-02
Posts: 21

Re: random freeze

gabell wrote:

Hi. I have the same notebook and the same problem. deepnote, did you try to boot with acpi=off option? I think problem is in acpi. Mail me please if you find the solution.

This was long time ago. smile I think I had 64bit Arch, now i have 32bit. But with new kernel new freezes appeared. See my new thread http://bbs.archlinux.org/viewtopic.php?pid=375283

I downgraded 2.6.24 and it is ok.


Asus A6M-Q050

Offline

Board footer

Powered by FluxBB