You are not logged in.

#1 2004-05-21 09:34:29

nordlicht
Member
From: Hamburg/Germany
Registered: 2003-07-23
Posts: 62

initscripts 0.6-9 system hangs

Hi

after updating to the new init scripts the system doesn't boot.
it hangs after the ide init.

what have i to edit to fix it? any ideas?

-chris

Offline

#2 2004-05-21 11:47:49

wdemoss
Member
From: WV - USA
Registered: 2004-01-18
Posts: 222

Re: initscripts 0.6-9 system hangs

Are you using LVM? if so be sure that the USELVM="yes" in rc.conf, else set it to "no". Thats the only thing that changed that I'm aware of.
- wd


Hobbes : Shouldn't we read the instructions?
Calvin : Do I look like a sissy?

Offline

#3 2004-05-21 17:05:28

colnago
Member
From: Victoria, BC
Registered: 2004-03-25
Posts: 438

Re: initscripts 0.6-9 system hangs

It does not actually change the files either.  I places them in /etc as rc.local.pacnew(no change) and rc.conf.pacnew(just the USELVM="no" line ).  You have to go in and move the files into place if you want them.

Offline

#4 2004-05-21 21:22:56

nordlicht
Member
From: Hamburg/Germany
Registered: 2003-07-23
Posts: 62

Re: initscripts 0.6-9 system hangs

Hi
it is a really strange problem.
I booted the system first with the superrescue-cd -same error. something is wrong with the irq's.
then i booted with knoppix 3.3 and teh system strated, but with many erros in some modules relatet with irq.
i edited the two files and tried to reboot arch. but the error is still there.
after detecing the last hd the system hang. only a hardware reset work.

booting windows on the same system works.

what can be wron with the irq? i didn't changed anything except updateing my arch.


-chris

Offline

#5 2004-05-22 10:11:37

lanrat
Member
From: Poland
Registered: 2003-10-28
Posts: 1,274

Re: initscripts 0.6-9 system hangs

Do you have anything nonstandard in your rc.conf or rc.local?
On the other hand it may also be harddisk problem (and just a coincidence that it happend after your last arch upgrade). Is your windows on a second hd? What are you using as bootmanager: grub or lilo? Exactly what errors about irq shows your knoppix (and which modules)? Maybe also try to remove anything that is not really needed from rc.conf MODULES line first. What kind of hardware do you have (board, hd is this ide or sata, etc.)?

Offline

#6 2004-05-23 22:02:46

lanrat
Member
From: Poland
Registered: 2003-10-28
Posts: 1,274

Re: initscripts 0.6-9 system hangs

Offline

#7 2004-05-24 16:59:49

nordlicht
Member
From: Hamburg/Germany
Registered: 2003-07-23
Posts: 62

Re: initscripts 0.6-9 system hangs

Hi

I solved the problem!
But I dont know where the pronlem really is.

I unplugged the system fom AC, after that the system booted normaly in arch linux. After rebooting in Windows the problem was there again.
Then I removed the soundcard (Terratec DMX) and everything was fine. Now I can boot windows and linux. if I install the soundcard the problem is back.

With a AC disconnect I can use the soundcard in linux and windows Without that only in windows.

What makes windows with my soundcardcard?

I think this is an really strange behaviour



-chris

Offline

Board footer

Powered by FluxBB