Arch Linux

SilentMan

Member

From: Ukraine

Registered: 2007-09-20

Posts: 41

Force blanking wrong-written dvd-rw?

Tried with dvd+rw-format and dvdrecord. Nothing
Is there any other way to blank this dvd-rw?
btw:

[sm@home-sm ~]> dvd+rw-mediainfo /dev/hda
INQUIRY:                [_NEC    ][DVD_RW ND-4550A ][1.06]
GET [CURRENT] CONFIGURATION:
 Mounted Media:         13h, DVD-RW Restricted Overwrite
 Media ID:              CMCW02      
 Current Write Speed:   6.1x1385=8467KB/s
 Write Speed #0:        6.1x1385=8467KB/s
 Write Speed #1:        5.1x1385=7056KB/s
 Write Speed #2:        4.1x1385=5645KB/s
 Write Speed #3:        3.1x1385=4234KB/s
 Write Speed #4:        2.0x1385=2822KB/s
 Write Speed #5:        1.0x1385=1411KB/s
GET [CURRENT] PERFORMANCE:
 Write Performance:     2.0x1385=2770KB/s@[0 -> 2298496]
 Speed Descriptor#0:    00/2298496 R@5.0x1385=6925KB/s W@2.0x1385=2770KB/s
 Speed Descriptor#1:    03/2298496 R@1.0x1385=1385KB/s W@1.0x1385=1385KB/s
READ DVD STRUCTURE[#10h]:
 Media Book Type:       00h, DVD-ROM book [revision 0]
 Legacy lead-out at:    0*2KB=0
READ DVD STRUCTURE[#0h]:
 Media Book Type:       00h, DVD-ROM book [revision 0]
 Last border-out at:    2045*2KB=4188160
READ DISC INFORMATION:
 Disc status:           appendable
 Number of Sessions:    1
 State of Last Session: reserved/damaged
 "Next" Track:          1
 Number of Tracks:      1
READ FORMAT CAPACITIES:
 no media:        4169920*2048=8539996160
 00h(800):        2297888*2048=4706074624
 10h(10):        2297888*2048=4706074624
 15h(10):        2297888*2048=4706074624
READ TRACK INFORMATION[#1]:
 Track State:           complete incremental,damaged
 Track Start Address:   0*2KB
 Free Blocks:           0*2KB
 Fixed Packet Size:     16*2KB
 Track Size:            2298496*2KB
READ CAPACITY:          0*2048=0

[root@home-sm sm]> dvdrecord --force --dao dev=/dev/hda blank=all
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : '_NEC    '
Identification : 'DVD_RW ND-4550A '
Revision       : '1.06'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE 
Supported modes: PACKET SAO
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Speed set to 8467 KB/s
Waiting for drive to calm down.
Starting to write CD/DVD at speed   6.0 in real force BLANK mode for single session.
Last chance to quit, starting real write i   0 seconds. Operation starts.
Errno: 0 (Success), blank unit scsi sendcmd: no error
CDB:  A1 00 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 51 01 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x51 Qual 0x01 (erase failure - incomplete erase operation detected) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 153.711s timeout 9600s
Starting to write CD/DVD at speed   6.0 in real force BLANK mode for single session.
No chance to quit anymore. Operation starts.
Errno: 0 (Success), blank unit scsi sendcmd: no error
CDB:  A1 00 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 51 01 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x51 Qual 0x01 (erase failure - incomplete erase operation detected) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 82.680s timeout 9600s
dvdrecord: Cannot blank disk, aborting.

Last edited by SilentMan (2008-04-30 11:03:55)

floke

Member

Registered: 2007-09-04

Posts: 266

Re: Force blanking wrong-written dvd-rw?

Try wodim - though you'll have to use the man page for deleting/reformatting instructions.
Works for me.