You are not logged in.
Tried with dvd+rw-format and dvdrecord. Nothing
Is there any other way to blank this dvd-rw?
btw:
[sm@home-sm ~]> dvd+rw-mediainfo /dev/hda
INQUIRY: [_NEC ][DVD_RW ND-4550A ][1.06]
GET [CURRENT] CONFIGURATION:
Mounted Media: 13h, DVD-RW Restricted Overwrite
Media ID: CMCW02
Current Write Speed: 6.1x1385=8467KB/s
Write Speed #0: 6.1x1385=8467KB/s
Write Speed #1: 5.1x1385=7056KB/s
Write Speed #2: 4.1x1385=5645KB/s
Write Speed #3: 3.1x1385=4234KB/s
Write Speed #4: 2.0x1385=2822KB/s
Write Speed #5: 1.0x1385=1411KB/s
GET [CURRENT] PERFORMANCE:
Write Performance: 2.0x1385=2770KB/s@[0 -> 2298496]
Speed Descriptor#0: 00/2298496 R@5.0x1385=6925KB/s W@2.0x1385=2770KB/s
Speed Descriptor#1: 03/2298496 R@1.0x1385=1385KB/s W@1.0x1385=1385KB/s
READ DVD STRUCTURE[#10h]:
Media Book Type: 00h, DVD-ROM book [revision 0]
Legacy lead-out at: 0*2KB=0
READ DVD STRUCTURE[#0h]:
Media Book Type: 00h, DVD-ROM book [revision 0]
Last border-out at: 2045*2KB=4188160
READ DISC INFORMATION:
Disc status: appendable
Number of Sessions: 1
State of Last Session: reserved/damaged
"Next" Track: 1
Number of Tracks: 1
READ FORMAT CAPACITIES:
no media: 4169920*2048=8539996160
00h(800): 2297888*2048=4706074624
10h(10): 2297888*2048=4706074624
15h(10): 2297888*2048=4706074624
READ TRACK INFORMATION[#1]:
Track State: complete incremental,damaged
Track Start Address: 0*2KB
Free Blocks: 0*2KB
Fixed Packet Size: 16*2KB
Track Size: 2298496*2KB
READ CAPACITY: 0*2048=0
[root@home-sm sm]> dvdrecord --force --dao dev=/dev/hda blank=all
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identification : 'DVD_RW ND-4550A '
Revision : '1.06'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Speed set to 8467 KB/s
Waiting for drive to calm down.
Starting to write CD/DVD at speed 6.0 in real force BLANK mode for single session.
Last chance to quit, starting real write i 0 seconds. Operation starts.
Errno: 0 (Success), blank unit scsi sendcmd: no error
CDB: A1 00 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 51 01 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x51 Qual 0x01 (erase failure - incomplete erase operation detected) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 153.711s timeout 9600s
Starting to write CD/DVD at speed 6.0 in real force BLANK mode for single session.
No chance to quit anymore. Operation starts.
Errno: 0 (Success), blank unit scsi sendcmd: no error
CDB: A1 00 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 51 01 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x51 Qual 0x01 (erase failure - incomplete erase operation detected) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 82.680s timeout 9600s
dvdrecord: Cannot blank disk, aborting.
Last edited by SilentMan (2008-04-30 11:03:55)
Offline
Try wodim - though you'll have to use the man page for deleting/reformatting instructions.
Works for me.
Offline