Arch Linux

95A31

Member

Registered: 2014-06-28

Posts: 3

Re: The AMD/ATI Bar & Grill

Hi all,
I just installed catalys but when run startx or kdm startup backlight is off and I can not see the monitor. I tryed both packages and blob by AMD. Both values in /sys/class/backlight/acpi_video0/brightness and  /sys/class/backlight/acpi_video0/max_brightness are 10. Xorg log and dmesg look like fine. I have an Asus notebook with AMD Radeon HD 6470M. Some ideas? Can someone help me in debug?

Malah

Member

From: France

Registered: 2014-06-17

Posts: 3

Website

Re: The AMD/ATI Bar & Grill

Hello, i need a little help.

I have an ATI RADEON HD 4870 and i use the repo catalyst-hd234k, in the last December i had played many hours to Kerbal Space Program and a month ago i have changed my HDD to an SSD and after the install of Arch Linux, KSP work anymore, i'm stuck on a black loading screen but i can hear that the game have finish to load, i have try all the solution that have been explain on  the KSP forum but no one work. There is one solution i haven't try : downgrade my catalyst packets.

Is it possible to find an old packet of that repo ?

I have try to use the opensource driver and with it, the game work (but i don't want to use it because of my old graphic card is at 80°C in idle with this driver and the fan is noisy).

Don't know if that can help, but this is my logs / configs :

[malah@arch-desktop ~]$ grep '(WW)' /var/log/Xorg.0.log
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  3765.060] (WW) Falling back to old probe method for fglrx
[  3765.069] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[  3766.617] (WW) evdev: Razer Razer Lycosa: ignoring absolute axes.

[malah@arch-desktop ~]$ cat /var/log/Xorg.0.log
[  3765.019] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[  3765.019] X Protocol Version 11, Revision 0
[  3765.019] Build Operating System: Linux 3.12.6-1-ARCH x86_64 
[  3765.019] Current Operating System: Linux arch-desktop 3.15.3-1-ARCH #1 SMP PREEMPT Tue Jul 1 07:32:45 CEST 2014 x86_64
[  3765.019] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda3 rw quiet nomodeset initrd=../initramfs-linux.img
[  3765.019] Build Date: 05 January 2014  01:13:47PM
[  3765.019]  
[  3765.019] Current version of pixman: 0.32.4
[  3765.019] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  3765.019] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  3765.020] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul  4 15:48:18 2014
[  3765.020] (==) Using config file: "/etc/X11/xorg.conf"
[  3765.020] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  3765.021] (==) ServerLayout "aticonfig Layout"
[  3765.021] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[  3765.021] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[  3765.021] (**) |   |-->Device "aticonfig-Device[0]-0"
[  3765.021] (==) Automatically adding devices
[  3765.021] (==) Automatically enabling devices
[  3765.021] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[  3765.021] (==) ModulePath set to "/usr/lib/xorg/modules"
[  3765.021] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  3765.021] (II) Loader magic: 0x7c4b00
[  3765.021] (II) Module ABI versions:
[  3765.021] 	X.Org ANSI C Emulation: 0.4
[  3765.021] 	X.Org Video Driver: 12.1
[  3765.021] 	X.Org XInput driver : 16.0
[  3765.021] 	X.Org Server Extension : 6.0
[  3765.022] (--) PCI:*(0:1:0:0) 1002:9440:1002:0502 rev 0, Mem @ 0xd0000000/268435456, 0xe5000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
[  3765.022] (II) Open ACPI successful (/var/run/acpid.socket)
[  3765.022] (II) "extmod" will be loaded by default.
[  3765.022] (II) "dbe" will be loaded by default.
[  3765.022] (II) "glx" will be loaded by default.
[  3765.022] (II) "record" will be loaded by default.
[  3765.022] (II) "dri" will be loaded by default.
[  3765.022] (II) "dri2" will be loaded by default.
[  3765.022] (II) LoadModule: "extmod"
[  3765.022] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[  3765.023] (II) Module extmod: vendor="X.Org Foundation"
[  3765.023] 	compiled for 1.12.4, module version = 1.0.0
[  3765.023] 	Module class: X.Org Server Extension
[  3765.023] 	ABI class: X.Org Server Extension, version 6.0
[  3765.023] (II) Loading extension MIT-SCREEN-SAVER
[  3765.023] (II) Loading extension XFree86-VidModeExtension
[  3765.023] (II) Loading extension XFree86-DGA
[  3765.023] (II) Loading extension DPMS
[  3765.023] (II) Loading extension XVideo
[  3765.023] (II) Loading extension XVideo-MotionCompensation
[  3765.023] (II) Loading extension X-Resource
[  3765.023] (II) LoadModule: "dbe"
[  3765.023] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[  3765.023] (II) Module dbe: vendor="X.Org Foundation"
[  3765.023] 	compiled for 1.12.4, module version = 1.0.0
[  3765.023] 	Module class: X.Org Server Extension
[  3765.023] 	ABI class: X.Org Server Extension, version 6.0
[  3765.023] (II) Loading extension DOUBLE-BUFFER
[  3765.023] (II) LoadModule: "glx"
[  3765.023] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  3765.024] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[  3765.024] 	compiled for 6.9.0, module version = 1.0.0
[  3765.024] (II) Loading extension GLX
[  3765.024] (II) LoadModule: "record"
[  3765.024] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[  3765.024] (II) Module record: vendor="X.Org Foundation"
[  3765.025] 	compiled for 1.12.4, module version = 1.13.0
[  3765.025] 	Module class: X.Org Server Extension
[  3765.025] 	ABI class: X.Org Server Extension, version 6.0
[  3765.025] (II) Loading extension RECORD
[  3765.025] (II) LoadModule: "dri"
[  3765.025] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[  3765.025] (II) Module dri: vendor="X.Org Foundation"
[  3765.025] 	compiled for 1.12.4, module version = 1.0.0
[  3765.025] 	ABI class: X.Org Server Extension, version 6.0
[  3765.025] (II) Loading extension XFree86-DRI
[  3765.025] (II) LoadModule: "dri2"
[  3765.025] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[  3765.025] (II) Module dri2: vendor="X.Org Foundation"
[  3765.025] 	compiled for 1.12.4, module version = 1.2.0
[  3765.025] 	ABI class: X.Org Server Extension, version 6.0
[  3765.025] (II) Loading extension DRI2
[  3765.025] (II) LoadModule: "fglrx"
[  3765.026] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[  3765.058] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[  3765.058] 	compiled for 1.4.99.906, module version = 8.97.2
[  3765.058] 	Module class: X.Org Video Driver
[  3765.059] (II) Loading sub module "fglrxdrm"
[  3765.059] (II) LoadModule: "fglrxdrm"
[  3765.059] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[  3765.059] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[  3765.059] 	compiled for 1.4.99.906, module version = 8.97.2
[  3765.059] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[  3765.059] (II) ATI Proprietary Linux Driver Release Identifier: 8.97.100.7                           
[  3765.059] (II) ATI Proprietary Linux Driver Build Date: Nov 16 2012 14:45:00
[  3765.059] (++) using VT number 1

[  3765.060] (WW) Falling back to old probe method for fglrx
[  3765.065] (II) Loading PCS database from /etc/ati/amdpcsdb
[  3765.068] (--) Chipset Supported AMD Graphics Processor (0x9440) found
[  3765.069] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[  3765.069] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[  3765.069] (II) AMD Video driver is signed
[  3765.069] (II) fglrx(0): pEnt->device->identifier=0x27babe0
[  3765.069] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[  3765.069] (II) Loading sub module "vgahw"
[  3765.069] (II) LoadModule: "vgahw"
[  3765.069] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[  3765.070] (II) Module vgahw: vendor="X.Org Foundation"
[  3765.070] 	compiled for 1.12.4, module version = 0.1.0
[  3765.070] 	ABI class: X.Org Video Driver, version 12.1
[  3765.070] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[  3765.070] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[  3765.070] (==) fglrx(0): Default visual is TrueColor
[  3765.070] (**) fglrx(0): Option "DPMS" "true"
[  3765.070] (==) fglrx(0): RGB weight 888
[  3765.070] (II) fglrx(0): Using 8 bits per RGB 
[  3765.070] (==) fglrx(0): Buffer Tiling is ON
[  3765.070] (II) Loading sub module "fglrxdrm"
[  3765.070] (II) LoadModule: "fglrxdrm"
[  3765.070] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[  3765.070] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[  3765.070] 	compiled for 1.4.99.906, module version = 8.97.2
[  3765.079] ukiDynamicMajor: found major device number 249
[  3765.079] ukiDynamicMajor: found major device number 249
[  3765.079] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  3765.079] ukiOpenDevice: node name is /dev/ati/card0
[  3765.079] ukiOpenDevice: open result is 12, (OK)
[  3765.079] ukiOpenByBusid: ukiOpenMinor returns 12
[  3765.079] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  3765.079] (**) fglrx(0): NoAccel = NO
[  3765.079] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[  3765.079] (--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series        " (Chipset = 0x9440)
[  3765.079] (--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0502)
[  3765.079] (==) fglrx(0): board vendor info: original ATI graphics adapter
[  3765.079] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[  3765.079] (--) fglrx(0): MMIO registers at 0xe5000000
[  3765.079] (--) fglrx(0): I/O port at 0x0000a000
[  3765.079] (==) fglrx(0): ROM-BIOS at 0x000c0000
[  3765.080] (II) fglrx(0): AC Adapter is used
[  3765.082] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[  3765.138] (II) Loading sub module "vbe"
[  3765.138] (II) LoadModule: "vbe"
[  3765.138] (II) Loading /usr/lib/xorg/modules/libvbe.so
[  3765.140] (II) Module vbe: vendor="X.Org Foundation"
[  3765.140] 	compiled for 1.12.4, module version = 1.1.0
[  3765.140] 	ABI class: X.Org Video Driver, version 12.1
[  3765.140] (II) fglrx(0): VESA BIOS detected
[  3765.140] (II) fglrx(0): VESA VBE Version 3.0
[  3765.140] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[  3765.140] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[  3765.140] (II) fglrx(0): VESA VBE OEM Software Rev: 11.3
[  3765.140] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[  3765.140] (II) fglrx(0): VESA VBE OEM Product: RV770
[  3765.140] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[  3765.171] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[  3765.171] (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR5
[  3765.171] (II) fglrx(0): PCIE card detected
[  3765.171] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[  3765.171] (II) fglrx(0): board/chipset is supported by this driver (original ATI board)
[  3765.172] (II) fglrx(0): Using adapter: 1:0.0.
[  3765.254] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[  3765.261] (II) fglrx(0): Interrupt handler installed at IRQ 49.
[  3765.261] (II) fglrx(0): RandR 1.2 support is enabled!
[  3765.261] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[  3765.261] (==) fglrx(0): Center Mode is disabled 
[  3765.261] (II) Loading sub module "fb"
[  3765.261] (II) LoadModule: "fb"
[  3765.262] (II) Loading /usr/lib/xorg/modules/libfb.so
[  3765.265] (II) Module fb: vendor="X.Org Foundation"
[  3765.265] 	compiled for 1.12.4, module version = 1.0.0
[  3765.265] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  3765.265] (II) Loading sub module "ddc"
[  3765.265] (II) LoadModule: "ddc"
[  3765.265] (II) Module "ddc" already built-in
[  3766.041] (II) fglrx(0): Finished Initialize PPLIB!
[  3766.052] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[  3766.052] (II) fglrx(0): Output DFP2 has no monitor section
[  3766.052] (II) fglrx(0): Output CRT1 has no monitor section
[  3766.052] (II) fglrx(0): Output CRT2 has no monitor section
[  3766.052] (II) fglrx(0): Output TV has no monitor section
[  3766.052] (II) fglrx(0): Output CV has no monitor section
[  3766.052] (II) Loading sub module "ddc"
[  3766.052] (II) LoadModule: "ddc"
[  3766.052] (II) Module "ddc" already built-in
[  3766.052] (II) fglrx(0): Connected Display0: DFP1
[  3766.052] (II) fglrx(0): Display0 EDID data ---------------------------
[  3766.052] (II) fglrx(0): Manufacturer: SAM  Model: 8da  Serial#: 808531512
[  3766.053] (II) fglrx(0): Year: 2012  Week: 42
[  3766.053] (II) fglrx(0): EDID Version: 1.3
[  3766.053] (II) fglrx(0): Digital Display Input
[  3766.053] (II) fglrx(0): Max Image Size [cm]: horiz.: 53  vert.: 30
[  3766.053] (II) fglrx(0): Gamma: 2.20
[  3766.053] (II) fglrx(0): DPMS capabilities: Off
[  3766.053] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  3766.053] (II) fglrx(0): First detailed timing is preferred mode
[  3766.053] (II) fglrx(0): redX: 0.631 redY: 0.351   greenX: 0.334 greenY: 0.615
[  3766.053] (II) fglrx(0): blueX: 0.157 blueY: 0.051   whiteX: 0.312 whiteY: 0.329
[  3766.053] (II) fglrx(0): Supported established timings:
[  3766.053] (II) fglrx(0): 720x400@70Hz
[  3766.053] (II) fglrx(0): 640x480@60Hz
[  3766.053] (II) fglrx(0): 640x480@67Hz
[  3766.053] (II) fglrx(0): 640x480@72Hz
[  3766.053] (II) fglrx(0): 640x480@75Hz
[  3766.053] (II) fglrx(0): 800x600@56Hz
[  3766.053] (II) fglrx(0): 800x600@60Hz
[  3766.053] (II) fglrx(0): 800x600@72Hz
[  3766.053] (II) fglrx(0): 800x600@75Hz
[  3766.053] (II) fglrx(0): 832x624@75Hz
[  3766.053] (II) fglrx(0): 1024x768@60Hz
[  3766.053] (II) fglrx(0): 1024x768@70Hz
[  3766.053] (II) fglrx(0): 1024x768@75Hz
[  3766.053] (II) fglrx(0): 1280x1024@75Hz
[  3766.053] (II) fglrx(0): 1152x864@75Hz
[  3766.053] (II) fglrx(0): Manufacturer's mask: 0
[  3766.053] (II) fglrx(0): Supported standard timings:
[  3766.053] (II) fglrx(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[  3766.053] (II) fglrx(0): #1: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[  3766.053] (II) fglrx(0): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
[  3766.053] (II) fglrx(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[  3766.053] (II) fglrx(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149
[  3766.053] (II) fglrx(0): #5: hsize: 1600  vsize 900  refresh: 60  vid: 49321
[  3766.053] (II) fglrx(0): #6: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[  3766.053] (II) fglrx(0): Supported detailed timing:
[  3766.053] (II) fglrx(0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[  3766.053] (II) fglrx(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[  3766.053] (II) fglrx(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[  3766.053] (II) fglrx(0): Supported detailed timing:
[  3766.053] (II) fglrx(0): clock: 74.2 MHz   Image Size:  531 x 299 mm
[  3766.053] (II) fglrx(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[  3766.053] (II) fglrx(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[  3766.053] (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[  3766.053] (II) fglrx(0): Monitor name: S24B350
[  3766.053] (II) fglrx(0): Number of EDID sections to follow: 1
[  3766.053] (II) fglrx(0): EDID (in hex):
[  3766.053] (II) fglrx(0): 	00ffffffffffff004c2dda0838363130
[  3766.053] (II) fglrx(0): 	2a16010380351e782aba41a159559d28
[  3766.053] (II) fglrx(0): 	0d5054bfef80714f81c0810081809500
[  3766.053] (II) fglrx(0): 	a9c0b3000101023a801871382d40582c
[  3766.053] (II) fglrx(0): 	4500132b2100001e011d007251d01e20
[  3766.053] (II) fglrx(0): 	6e285500132b2100001e000000fd0032
[  3766.053] (II) fglrx(0): 	4b1e5111000a202020202020000000fc
[  3766.053] (II) fglrx(0): 	00533234423335300a2020202020017a
[  3766.053] (II) fglrx(0): End of Display0 EDID data --------------------
[  3766.277] (II) fglrx(0): EDID for output DFP1
[  3766.277] (II) fglrx(0): Manufacturer: SAM  Model: 8da  Serial#: 808531512
[  3766.277] (II) fglrx(0): Year: 2012  Week: 42
[  3766.277] (II) fglrx(0): EDID Version: 1.3
[  3766.277] (II) fglrx(0): Digital Display Input
[  3766.277] (II) fglrx(0): Max Image Size [cm]: horiz.: 53  vert.: 30
[  3766.277] (II) fglrx(0): Gamma: 2.20
[  3766.277] (II) fglrx(0): DPMS capabilities: Off
[  3766.277] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  3766.277] (II) fglrx(0): First detailed timing is preferred mode
[  3766.277] (II) fglrx(0): redX: 0.631 redY: 0.351   greenX: 0.334 greenY: 0.615
[  3766.277] (II) fglrx(0): blueX: 0.157 blueY: 0.051   whiteX: 0.312 whiteY: 0.329
[  3766.277] (II) fglrx(0): Supported established timings:
[  3766.277] (II) fglrx(0): 720x400@70Hz
[  3766.277] (II) fglrx(0): 640x480@60Hz
[  3766.277] (II) fglrx(0): 640x480@67Hz
[  3766.277] (II) fglrx(0): 640x480@72Hz
[  3766.277] (II) fglrx(0): 640x480@75Hz
[  3766.277] (II) fglrx(0): 800x600@56Hz
[  3766.277] (II) fglrx(0): 800x600@60Hz
[  3766.277] (II) fglrx(0): 800x600@72Hz
[  3766.277] (II) fglrx(0): 800x600@75Hz
[  3766.277] (II) fglrx(0): 832x624@75Hz
[  3766.277] (II) fglrx(0): 1024x768@60Hz
[  3766.277] (II) fglrx(0): 1024x768@70Hz
[  3766.277] (II) fglrx(0): 1024x768@75Hz
[  3766.277] (II) fglrx(0): 1280x1024@75Hz
[  3766.277] (II) fglrx(0): 1152x864@75Hz
[  3766.277] (II) fglrx(0): Manufacturer's mask: 0
[  3766.277] (II) fglrx(0): Supported standard timings:
[  3766.278] (II) fglrx(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[  3766.278] (II) fglrx(0): #1: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[  3766.278] (II) fglrx(0): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
[  3766.278] (II) fglrx(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[  3766.278] (II) fglrx(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149
[  3766.278] (II) fglrx(0): #5: hsize: 1600  vsize 900  refresh: 60  vid: 49321
[  3766.278] (II) fglrx(0): #6: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[  3766.278] (II) fglrx(0): Supported detailed timing:
[  3766.278] (II) fglrx(0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[  3766.278] (II) fglrx(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[  3766.278] (II) fglrx(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[  3766.278] (II) fglrx(0): Supported detailed timing:
[  3766.278] (II) fglrx(0): clock: 74.2 MHz   Image Size:  531 x 299 mm
[  3766.278] (II) fglrx(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[  3766.278] (II) fglrx(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[  3766.278] (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[  3766.278] (II) fglrx(0): Monitor name: S24B350
[  3766.278] (II) fglrx(0): Number of EDID sections to follow: 1
[  3766.278] (II) fglrx(0): EDID (in hex):
[  3766.278] (II) fglrx(0): 	00ffffffffffff004c2dda0838363130
[  3766.278] (II) fglrx(0): 	2a16010380351e782aba41a159559d28
[  3766.278] (II) fglrx(0): 	0d5054bfef80714f81c0810081809500
[  3766.278] (II) fglrx(0): 	a9c0b3000101023a801871382d40582c
[  3766.278] (II) fglrx(0): 	4500132b2100001e011d007251d01e20
[  3766.278] (II) fglrx(0): 	6e285500132b2100001e000000fd0032
[  3766.278] (II) fglrx(0): 	4b1e5111000a202020202020000000fc
[  3766.278] (II) fglrx(0): 	00533234423335300a2020202020017a
[  3766.278] (II) fglrx(0): EDID vendor "SAM", prod id 2266
[  3766.278] (II) fglrx(0): Using EDID range info for horizontal sync
[  3766.278] (II) fglrx(0): Using EDID range info for vertical refresh
[  3766.278] (II) fglrx(0): Printing DDC gathered Modelines:
[  3766.278] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[  3766.278] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[  3766.278] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  3766.278] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[  3766.278] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[  3766.278] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[  3766.278] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[  3766.278] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  3766.278] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[  3766.278] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[  3766.278] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[  3766.278] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[  3766.278] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  3766.278] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[  3766.278] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[  3766.278] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[  3766.278] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[  3766.278] (II) fglrx(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[  3766.278] (II) fglrx(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[  3766.278] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[  3766.278] (II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[  3766.278] (II) fglrx(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz e)
[  3766.278] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[  3766.278] (II) fglrx(0): Printing probed modes for output DFP1
[  3766.278] (II) fglrx(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 -hsync -vsync (67.5 kHz)
[  3766.278] (II) fglrx(0): Modeline "1776x1000"x60.0  147.05  1776 1880 2072 2368  1000 1001 1004 1035 +hsync -vsync (62.1 kHz)
[  3766.278] (II) fglrx(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 -hsync -vsync (56.2 kHz)
[  3766.278] (II) fglrx(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 +hsync -vsync (65.3 kHz)
[  3766.278] (II) fglrx(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 +hsync -vsync (65.3 kHz)
[  3766.278] (II) fglrx(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 -hsync -vsync (60.0 kHz)
[  3766.278] (II) fglrx(0): Modeline "1360x1024"x60.0  116.01  1360 1448 1592 1824  1024 1025 1028 1060 +hsync -vsync (63.6 kHz)
[  3766.278] (II) fglrx(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 -hsync -vsync (80.0 kHz)
[  3766.278] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
[  3766.278] (II) fglrx(0): Modeline "1440x900"x60.0  106.50  1440 1520 1672 1904  900 903 909 934 +hsync -vsync (55.9 kHz)
[  3766.278] (II) fglrx(0): Modeline "1280x960"x75.0  129.86  1280 1368 1504 1728  960 961 964 1002 +hsync -vsync (75.2 kHz)
[  3766.278] (II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 -hsync -vsync (60.0 kHz)
[  3766.278] (II) fglrx(0): Modeline "1280x800"x75.0  107.21  1280 1360 1496 1712  800 801 804 835 +hsync -vsync (62.6 kHz)
[  3766.278] (II) fglrx(0): Modeline "1280x800"x60.0   83.46  1280 1344 1480 1680  800 801 804 828 +hsync -vsync (49.7 kHz)
[  3766.278] (II) fglrx(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 -hsync -vsync (67.5 kHz)
[  3766.278] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 +hsync -vsync (53.7 kHz)
[  3766.278] (II) fglrx(0): Modeline "1280x768"x75.0  102.25  1280 1360 1488 1696  768 771 778 805 +hsync -vsync (60.3 kHz)
[  3766.278] (II) fglrx(0): Modeline "1280x768"x60.0   79.50  1280 1344 1472 1664  768 771 778 798 +hsync -vsync (47.8 kHz)
[  3766.278] (II) fglrx(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 -hsync -vsync (45.0 kHz)
[  3766.278] (II) fglrx(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 -hsync -vsync (37.5 kHz)
[  3766.278] (II) fglrx(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 -hsync -vsync (60.0 kHz)
[  3766.278] (II) fglrx(0): Modeline "1024x768"x70.0   75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync (56.5 kHz)
[  3766.278] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync (48.4 kHz)
[  3766.278] (II) fglrx(0): Modeline "1152x648"x60.0   59.90  1152 1200 1320 1488  648 649 652 671 +hsync -vsync (40.3 kHz)
[  3766.278] (II) fglrx(0): Modeline "1152x648"x50.0   48.55  1152 1184 1304 1456  648 649 652 667 +hsync -vsync (33.3 kHz)
[  3766.278] (II) fglrx(0): Modeline "800x600"x72.0   50.00  800 856 976 1040  600 637 643 666 -hsync -vsync (48.1 kHz)
[  3766.278] (II) fglrx(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 -hsync -vsync (46.9 kHz)
[  3766.278] (II) fglrx(0): Modeline "800x600"x70.0   45.50  800 840 920 1040  600 601 604 625 +hsync -vsync (43.8 kHz)
[  3766.278] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 -hsync -vsync (37.9 kHz)
[  3766.278] (II) fglrx(0): Modeline "800x600"x56.0   36.00  800 824 896 1024  600 601 603 625 -hsync -vsync (35.2 kHz)
[  3766.278] (II) fglrx(0): Modeline "800x600"x50.0   31.14  800 824 904 1008  600 601 604 618 +hsync -vsync (30.9 kHz)
[  3766.278] (II) fglrx(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 +hsync +vsync (31.2 kHz)
[  3766.278] (II) fglrx(0): Modeline "720x480"x60.0   27.00  720 736 798 858  480 489 495 525 +hsync +vsync (31.5 kHz)
[  3766.278] (II) fglrx(0): Modeline "720x480"x50.0   21.78  720 728 800 880  480 481 484 495 +hsync -vsync (24.8 kHz)
[  3766.278] (II) fglrx(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 +hsync +vsync (37.5 kHz)
[  3766.278] (II) fglrx(0): Modeline "640x480"x72.0   31.50  640 656 696 832  480 481 484 520 +hsync +vsync (37.9 kHz)
[  3766.278] (II) fglrx(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 +hsync +vsync (31.5 kHz)
[  3766.278] (II) fglrx(0): Modeline "640x480"x50.0   19.40  640 648 712 784  480 481 484 495 +hsync -vsync (24.7 kHz)
[  3766.278] (II) fglrx(0): EDID for output DFP2
[  3766.278] (II) fglrx(0): EDID for output CRT1
[  3766.278] (II) fglrx(0): EDID for output CRT2
[  3766.278] (II) fglrx(0): EDID for output TV
[  3766.278] (II) fglrx(0): EDID for output CV
[  3766.278] (II) fglrx(0): Output DFP1 connected
[  3766.278] (II) fglrx(0): Output DFP2 disconnected
[  3766.278] (II) fglrx(0): Output CRT1 disconnected
[  3766.278] (II) fglrx(0): Output CRT2 disconnected
[  3766.278] (II) fglrx(0): Output TV disconnected
[  3766.278] (II) fglrx(0): Output CV disconnected
[  3766.279] (II) fglrx(0): Using user preference for initial modes
[  3766.279] (II) fglrx(0): Output DFP1 using initial mode 1920x1080
[  3766.279] (II) fglrx(0): Display dimensions: (530, 300) mm
[  3766.279] (II) fglrx(0): DPI set to (92, 92)
[  3766.279] (II) fglrx(0): Adapter ATI Radeon HD 4800 Series         has 2 configurable heads and 1 displays connected.
[  3766.279] (==) fglrx(0):  PseudoColor visuals disabled
[  3766.279] (II) Loading sub module "ramdac"
[  3766.279] (II) LoadModule: "ramdac"
[  3766.279] (II) Module "ramdac" already built-in
[  3766.279] (==) fglrx(0): NoDRI = NO
[  3766.279] (==) fglrx(0): Capabilities: 0x00000000
[  3766.279] (==) fglrx(0): CapabilitiesEx: 0x00000000
[  3766.279] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[  3766.279] (==) fglrx(0): UseFastTLS=0
[  3766.279] (==) fglrx(0): BlockSignalsOnLock=1
[  3766.279] (--) Depth 24 pixmap format is 32 bpp
[  3766.279] (II) Loading extension ATIFGLRXDRI
[  3766.279] (II) fglrx(0): doing swlDriScreenInit
[  3766.279] (II) fglrx(0): swlDriScreenInit for fglrx driver
[  3766.279] ukiDynamicMajor: found major device number 249
[  3766.279] ukiDynamicMajor: found major device number 249
[  3766.279] ukiDynamicMajor: found major device number 249
[  3766.279] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  3766.279] ukiOpenDevice: node name is /dev/ati/card0
[  3766.279] ukiOpenDevice: open result is 13, (OK)
[  3766.279] ukiOpenByBusid: ukiOpenMinor returns 13
[  3766.279] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  3766.279] (II) fglrx(0): [uki] DRM interface version 1.0
[  3766.279] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[  3766.279] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2ea7000
[  3766.279] (II) fglrx(0): [uki] mapped SAREA 0x2ea7000 to 0x7f01a6d53000
[  3766.279] (II) fglrx(0): [uki] framebuffer handle = 0x2ea8000
[  3766.279] (II) fglrx(0): [uki] added 1 reserved context for kernel
[  3766.279] (II) fglrx(0): swlDriScreenInit done
[  3766.279] (II) fglrx(0): Kernel Module Version Information:
[  3766.279] (II) fglrx(0):     Name: fglrx
[  3766.279] (II) fglrx(0):     Version: 8.97.2
[  3766.279] (II) fglrx(0):     Date: Nov 16 2012
[  3766.279] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[  3766.279] (II) fglrx(0): Kernel Module version matches driver.
[  3766.279] (II) fglrx(0): Kernel Module Build Time Information:
[  3766.279] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.15.3-1-ARCH
[  3766.279] (II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
[  3766.279] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[  3766.279] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[  3766.279] (II) fglrx(0): [uki] register handle = 0x02ea9000
[  3766.291] (II) fglrx(0): DRI initialization successfull
[  3766.291] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01068000
[  3766.291] (==) fglrx(0): Backing store disabled
[  3766.291] (II) Loading extension FGLRXEXTENSION
[  3766.291] (**) fglrx(0): DPMS enabled
[  3766.291] (II) fglrx(0): Initialized in-driver Xinerama extension
[  3766.291] (**) fglrx(0): Textured Video is enabled.
[  3766.291] (II) LoadModule: "glesx"
[  3766.291] (II) Loading /usr/lib/xorg/modules/glesx.so
[  3766.294] (II) Module glesx: vendor="X.Org Foundation"
[  3766.294] 	compiled for 1.4.99.906, module version = 1.0.0
[  3766.294] (II) Loading extension GLESX
[  3766.294] (II) fglrx(0): GLESX enableFlags = 528
[  3766.294] (II) fglrx(0): GLESX is enabled
[  3766.294] (II) LoadModule: "amdxmm"
[  3766.294] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[  3766.296] (II) Module amdxmm: vendor="X.Org Foundation"
[  3766.296] 	compiled for 1.4.99.906, module version = 2.0.0
[  3766.296] (II) Loading extension AMDXVOPL
[  3766.296] (II) Loading extension AMDXVBA
[  3766.298] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[  3766.299] (II) fglrx(0): Enable composite support successfully
[  3766.299] (II) fglrx(0): X context handle = 0x1
[  3766.299] (II) fglrx(0): [DRI] installation complete
[  3766.300] (==) fglrx(0): Silken mouse enabled
[  3766.300] (==) fglrx(0): Using HW cursor of display infrastructure!
[  3766.300] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[  3766.300] (II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
[  3766.300] (II) fglrx(0): Cannot set TV horizontal size.
[  3766.300] (II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed. 
[  3766.300] (II) fglrx(0): Cannot set TV horizontal position.
[  3766.300] (II) fglrx(0): Cannot set TV vertical position.
[  3766.422] (--) RandR disabled
[  3766.422] (II) Initializing built-in extension Generic Event Extension
[  3766.422] (II) Initializing built-in extension SHAPE
[  3766.422] (II) Initializing built-in extension MIT-SHM
[  3766.422] (II) Initializing built-in extension XInputExtension
[  3766.422] (II) Initializing built-in extension XTEST
[  3766.422] (II) Initializing built-in extension BIG-REQUESTS
[  3766.422] (II) Initializing built-in extension SYNC
[  3766.422] (II) Initializing built-in extension XKEYBOARD
[  3766.422] (II) Initializing built-in extension XC-MISC
[  3766.422] (II) Initializing built-in extension SECURITY
[  3766.422] (II) Initializing built-in extension XINERAMA
[  3766.422] (II) Initializing built-in extension XFIXES
[  3766.422] (II) Initializing built-in extension RENDER
[  3766.422] (II) Initializing built-in extension RANDR
[  3766.422] (II) Initializing built-in extension COMPOSITE
[  3766.422] (II) Initializing built-in extension DAMAGE
[  3766.423] ukiDynamicMajor: found major device number 249
[  3766.423] ukiDynamicMajor: found major device number 249
[  3766.423] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  3766.423] ukiOpenDevice: node name is /dev/ati/card0
[  3766.423] ukiOpenDevice: open result is 14, (OK)
[  3766.423] ukiOpenByBusid: ukiOpenMinor returns 14
[  3766.423] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  3766.488] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[  3766.498] (II) fglrx(0): Enable the clock gating!
[  3766.505] (II) fglrx(0): Overdrive clocks set succeeded for BDF 1:0:0
[  3766.505] (II) fglrx(0): Setting screen physical size to 508 x 285
[  3766.594] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[  3766.594] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  3766.594] (II) LoadModule: "evdev"
[  3766.594] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  3766.595] (II) Module evdev: vendor="X.Org Foundation"
[  3766.595] 	compiled for 1.12.3.901, module version = 2.7.3
[  3766.595] 	Module class: X.Org XInput Driver
[  3766.595] 	ABI class: X.Org XInput driver, version 16.0
[  3766.595] (II) Using input driver 'evdev' for 'Power Button'
[  3766.595] (**) Power Button: always reports core events
[  3766.595] (**) evdev: Power Button: Device: "/dev/input/event5"
[  3766.595] (--) evdev: Power Button: Vendor 0 Product 0x1
[  3766.595] (--) evdev: Power Button: Found keys
[  3766.595] (II) evdev: Power Button: Configuring as keyboard
[  3766.595] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[  3766.595] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  3766.595] (**) Option "xkb_rules" "evdev"
[  3766.595] (**) Option "xkb_model" "evdev"
[  3766.595] (**) Option "xkb_layout" "fr"
[  3766.616] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[  3766.616] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  3766.616] (II) Using input driver 'evdev' for 'Power Button'
[  3766.616] (**) Power Button: always reports core events
[  3766.616] (**) evdev: Power Button: Device: "/dev/input/event4"
[  3766.616] (--) evdev: Power Button: Vendor 0 Product 0x1
[  3766.616] (--) evdev: Power Button: Found keys
[  3766.616] (II) evdev: Power Button: Configuring as keyboard
[  3766.616] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event4"
[  3766.616] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[  3766.616] (**) Option "xkb_rules" "evdev"
[  3766.616] (**) Option "xkb_model" "evdev"
[  3766.616] (**) Option "xkb_layout" "fr"
[  3766.616] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event6)
[  3766.616] (II) No input driver specified, ignoring this device.
[  3766.616] (II) This device may have been added with another device file.
[  3766.616] (II) config/udev: Adding input device Razer Razer Lycosa (/dev/input/event0)
[  3766.616] (**) Razer Razer Lycosa: Applying InputClass "evdev keyboard catchall"
[  3766.616] (II) Using input driver 'evdev' for 'Razer Razer Lycosa'
[  3766.616] (**) Razer Razer Lycosa: always reports core events
[  3766.616] (**) evdev: Razer Razer Lycosa: Device: "/dev/input/event0"
[  3766.616] (--) evdev: Razer Razer Lycosa: Vendor 0x1532 Product 0x109
[  3766.616] (--) evdev: Razer Razer Lycosa: Found keys
[  3766.616] (II) evdev: Razer Razer Lycosa: Configuring as keyboard
[  3766.616] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb3/3-1/3-1:1.0/0003:1532:0109.0001/input/input1/event0"
[  3766.616] (II) XINPUT: Adding extended input device "Razer Razer Lycosa" (type: KEYBOARD, id 8)
[  3766.616] (**) Option "xkb_rules" "evdev"
[  3766.616] (**) Option "xkb_model" "evdev"
[  3766.616] (**) Option "xkb_layout" "fr"
[  3766.617] (II) config/udev: Adding input device Razer Razer Lycosa (/dev/input/event1)
[  3766.617] (**) Razer Razer Lycosa: Applying InputClass "evdev keyboard catchall"
[  3766.617] (II) Using input driver 'evdev' for 'Razer Razer Lycosa'
[  3766.617] (**) Razer Razer Lycosa: always reports core events
[  3766.617] (**) evdev: Razer Razer Lycosa: Device: "/dev/input/event1"
[  3766.617] (--) evdev: Razer Razer Lycosa: Vendor 0x1532 Product 0x109
[  3766.617] (--) evdev: Razer Razer Lycosa: Found 1 mouse buttons
[  3766.617] (--) evdev: Razer Razer Lycosa: Found scroll wheel(s)
[  3766.617] (--) evdev: Razer Razer Lycosa: Found relative axes
[  3766.617] (II) evdev: Razer Razer Lycosa: Forcing relative x/y axes to exist.
[  3766.617] (--) evdev: Razer Razer Lycosa: Found absolute axes
[  3766.617] (II) evdev: Razer Razer Lycosa: Forcing absolute x/y axes to exist.
[  3766.617] (--) evdev: Razer Razer Lycosa: Found keys
[  3766.617] (II) evdev: Razer Razer Lycosa: Configuring as mouse
[  3766.617] (II) evdev: Razer Razer Lycosa: Configuring as keyboard
[  3766.617] (II) evdev: Razer Razer Lycosa: Adding scrollwheel support
[  3766.617] (**) evdev: Razer Razer Lycosa: YAxisMapping: buttons 4 and 5
[  3766.617] (**) evdev: Razer Razer Lycosa: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  3766.617] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb3/3-1/3-1:1.1/0003:1532:0109.0002/input/input2/event1"
[  3766.617] (II) XINPUT: Adding extended input device "Razer Razer Lycosa" (type: KEYBOARD, id 9)
[  3766.617] (**) Option "xkb_rules" "evdev"
[  3766.617] (**) Option "xkb_model" "evdev"
[  3766.617] (**) Option "xkb_layout" "fr"
[  3766.617] (II) evdev: Razer Razer Lycosa: initialized for relative axes.
[  3766.617] (WW) evdev: Razer Razer Lycosa: ignoring absolute axes.
[  3766.617] (**) Razer Razer Lycosa: (accel) keeping acceleration scheme 1
[  3766.617] (**) Razer Razer Lycosa: (accel) acceleration profile 0
[  3766.617] (**) Razer Razer Lycosa: (accel) acceleration factor: 2.000
[  3766.617] (**) Razer Razer Lycosa: (accel) acceleration threshold: 4
[  3766.618] (II) config/udev: Adding input device Razer Razer Lachesis (/dev/input/event2)
[  3766.618] (**) Razer Razer Lachesis: Applying InputClass "evdev pointer catchall"
[  3766.618] (II) Using input driver 'evdev' for 'Razer Razer Lachesis'
[  3766.618] (**) Razer Razer Lachesis: always reports core events
[  3766.618] (**) evdev: Razer Razer Lachesis: Device: "/dev/input/event2"
[  3766.618] (--) evdev: Razer Razer Lachesis: Vendor 0x1532 Product 0xc
[  3766.618] (--) evdev: Razer Razer Lachesis: Found 12 mouse buttons
[  3766.618] (--) evdev: Razer Razer Lachesis: Found scroll wheel(s)
[  3766.618] (--) evdev: Razer Razer Lachesis: Found relative axes
[  3766.618] (--) evdev: Razer Razer Lachesis: Found x and y relative axes
[  3766.618] (II) evdev: Razer Razer Lachesis: Configuring as mouse
[  3766.618] (II) evdev: Razer Razer Lachesis: Adding scrollwheel support
[  3766.618] (**) evdev: Razer Razer Lachesis: YAxisMapping: buttons 4 and 5
[  3766.618] (**) evdev: Razer Razer Lachesis: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  3766.618] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb3/3-2/3-2:1.0/0003:1532:000C.0003/input/input3/event2"
[  3766.618] (II) XINPUT: Adding extended input device "Razer Razer Lachesis" (type: MOUSE, id 10)
[  3766.618] (II) evdev: Razer Razer Lachesis: initialized for relative axes.
[  3766.618] (**) Razer Razer Lachesis: (accel) keeping acceleration scheme 1
[  3766.618] (**) Razer Razer Lachesis: (accel) acceleration profile 0
[  3766.618] (**) Razer Razer Lachesis: (accel) acceleration factor: 2.000
[  3766.618] (**) Razer Razer Lachesis: (accel) acceleration threshold: 4
[  3766.618] (II) config/udev: Adding input device Razer Razer Lachesis (/dev/input/mouse0)
[  3766.618] (II) No input driver specified, ignoring this device.
[  3766.618] (II) This device may have been added with another device file.
[  3766.618] (II) config/udev: Adding input device Razer Razer Lachesis (/dev/input/event3)
[  3766.618] (**) Razer Razer Lachesis: Applying InputClass "evdev keyboard catchall"
[  3766.618] (II) Using input driver 'evdev' for 'Razer Razer Lachesis'
[  3766.618] (**) Razer Razer Lachesis: always reports core events
[  3766.618] (**) evdev: Razer Razer Lachesis: Device: "/dev/input/event3"
[  3766.618] (--) evdev: Razer Razer Lachesis: Vendor 0x1532 Product 0xc
[  3766.618] (--) evdev: Razer Razer Lachesis: Found keys
[  3766.618] (II) evdev: Razer Razer Lachesis: Configuring as keyboard
[  3766.618] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb3/3-2/3-2:1.1/0003:1532:000C.0004/input/input4/event3"
[  3766.618] (II) XINPUT: Adding extended input device "Razer Razer Lachesis" (type: KEYBOARD, id 11)
[  3766.618] (**) Option "xkb_rules" "evdev"
[  3766.618] (**) Option "xkb_model" "evdev"
[  3766.618] (**) Option "xkb_layout" "fr"
[  3766.619] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event9)
[  3766.619] (II) No input driver specified, ignoring this device.
[  3766.619] (II) This device may have been added with another device file.
[  3766.619] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event10)
[  3766.619] (II) No input driver specified, ignoring this device.
[  3766.619] (II) This device may have been added with another device file.
[  3766.619] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event11)
[  3766.619] (II) No input driver specified, ignoring this device.
[  3766.619] (II) This device may have been added with another device file.
[  3766.619] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event12)
[  3766.619] (II) No input driver specified, ignoring this device.
[  3766.619] (II) This device may have been added with another device file.
[  3766.620] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event13)
[  3766.620] (II) No input driver specified, ignoring this device.
[  3766.620] (II) This device may have been added with another device file.
[  3766.620] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event14)
[  3766.620] (II) No input driver specified, ignoring this device.
[  3766.620] (II) This device may have been added with another device file.
[  3766.620] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event7)
[  3766.620] (II) No input driver specified, ignoring this device.
[  3766.620] (II) This device may have been added with another device file.
[  3766.620] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event8)
[  3766.620] (II) No input driver specified, ignoring this device.
[  3766.620] (II) This device may have been added with another device file.
[  3766.620] (II) config/udev: Adding input device PC Speaker (/dev/input/event15)
[  3766.620] (II) No input driver specified, ignoring this device.
[  3766.620] (II) This device may have been added with another device file.
[  3766.639] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[  3767.248] (II) fglrx(0): EDID vendor "SAM", prod id 2266
[  3767.248] (II) fglrx(0): Using hsync ranges from config file
[  3767.248] (II) fglrx(0): Using vrefresh ranges from config file
[  3767.248] (II) fglrx(0): Printing DDC gathered Modelines:
[  3767.248] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[  3767.248] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[  3767.248] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  3767.248] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[  3767.248] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[  3767.248] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[  3767.248] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[  3767.248] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  3767.248] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[  3767.248] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[  3767.248] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[  3767.248] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[  3767.248] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  3767.248] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[  3767.248] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[  3767.248] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[  3767.248] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[  3767.248] (II) fglrx(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[  3767.248] (II) fglrx(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[  3767.248] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[  3767.248] (II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[  3767.248] (II) fglrx(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz e)
[  3767.248] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)

[malah@arch-desktop ~]$ cat /etc/X11/xorg.conf
Section "ServerLayout"
	Identifier     "aticonfig Layout"
	Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Module"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]-0"
	#Option	    "VendorName" "ATI Proprietary Driver"
	#Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]-0"
	Driver      "fglrx"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]-0"
	Device     "aticonfig-Device[0]-0"
	Monitor    "aticonfig-Monitor[0]-0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1920x1080" "1920x1080"
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

[malah@arch-desktop ~]$ lsmod | grep fglrx
fglrx                3210443  72 
amd_iommu_v2            7302  1 fglrx
button                  4765  1 fglrx

[malah@arch-desktop ~]$ fglrxinfo
libGL: AtiGetClientDriverName: 8.97.2 fglrx (screen 0)
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri//fglrx_dri.so
ukiDynamicMajor: found major device number 249
ukiDynamicMajor: found major device number 249
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 6, (OK)
ukiOpenByBusid: ukiOpenMinor returns 6
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
display: :0.0  screen: 0
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: ATI Radeon HD 4800 Series        
OpenGL version string: 3.3.11672 Compatibility Profile Context

And my post on the KSP forum : http://forum.kerbalspaceprogram.com/thr … ost1228593

Sorry for my bad english, and thanks for the help

Last edited by Malah (2014-07-04 14:15:48)

brando56894

Member

From: NYC

Registered: 2008-08-03

Posts: 681

Re: The AMD/ATI Bar & Grill

EDIT: On a whim I was thinking that maybe the issue was with the display not matching perfectly between my desktop monitor (27" 1080P Asus) and my TV (40" 1080P Scepter) which is mirrored also. I noticed that the flickering wasn't happening on the TV. So I turned the TV off and the flickering stopped!! Anyone have any idea why? I'm going to assume it has something to do with refresh rates.

I have an odd problem that just popped up... I installed the Catalyst drivers a few days ago since I have 2 Radeon HD 7870s in Crossfire. Everything was fine up until a few hours ago that I noticed tearing in XBMC after messing with the advanced settings file and enabling hardware acceleration. At first I followed the VDPAU and VA-API guides for the catalyst drives. I installed libvdpau-va-gl and libva-xvba-driver, rebooted and then noticed that for some odd reason the Taskbar/SystemPanel in KDE started flickering constantly, like every second or two, more so when I was typing or it had the refresh the desktop because something was happening (typing, cursor blinking, text flowing through the console). What happens is like the taskbar goes down about a milimeter and then seems to come back up. Also when I open up the context menu in chrome it's all black until I mouse over it. I tried to record it with a screen recorder but surprisingly it doesn't show up, which confuses me. I tried to record it with my smartphone but it's being stupid and won't record videos for some reason.

I noticed that I didn't have the env variables set so I did that, no change. I removed those packages and went with the ones specified in the AMD Catalyst wiki page, which are xvba-video, mplayer-vaapi, and libva. Installed those and rebooted, still no change. I swapped out  xvba-video for libva-xvba-driver but once again, no difference. I even removed libva-xvba-driver but that didn't even help either! I tried to remove libva but avidemux-cli, ffmepg and plex-home-theater rely on it. 

I'm using OpenGL 3 in KDE, fgl_glxgears runs fine. Here's the output of some stuff.

 [bran@ra ~]$ lsmod | grep fglrx
fglrx                9168598  196 
amd_iommu_v2            7302  1 fglrx
button                  4765  1 fglrx
 [bran@ra ~]$ fglrxinfo
display: :0  screen: 0
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: AMD Radeon HD 7800 Series 
OpenGL version string: 4.4.12967 Compatibility Profile Context 14.20

How can I fix this without going to the OS driver?

Last edited by brando56894 (2014-07-07 22:36:24)

lbdkmjdf

Member

Registered: 2014-07-08

Posts: 10

Re: The AMD/ATI Bar & Grill

Hey guys, if any of you has problem with kernels 3.15+ and dual graphics (freezing, dmesg spammed with "Link Down event ignored on slot(2): already powering off"), read this thread: https://bbs.archlinux.org/viewtopic.php … 4#p1434054 and https://bugzilla.kernel.org/show_bug.cgi?id=79701

EDIT: sorry, wrong thread... this happens only with the radeon open source driver.

Last edited by lbdkmjdf (2014-07-08 23:31:04)

SkarZ

Member

Registered: 2014-07-14

Posts: 3

Re: The AMD/ATI Bar & Grill

Hi,

Just for information with the last version of catalyst from Vi0l0 repo, chromium is not working anymore in addition to GDM, it just crash xorg (coredump) as soon as it launches
my system is up to date, kernel 3.14.12-1-lts or 3.15.5-1, hardware is nothing fancy ATI 5650.

Vi0L0

Member

From: Poland

Registered: 2009-06-24

Posts: 1,349

Website

Re: The AMD/ATI Bar & Grill

Hi,

Just for information with the last version of catalyst from Vi0l0 repo, chromium is not working anymore in addition to GDM, it just crash xorg (coredump) as soon as it launches
my system is up to date, kernel 3.14.12-1-lts or 3.15.5-1, hardware is nothing fancy ATI 5650.

Can someone confirm?
Its working fine here on both KDE and GNOME3 - chromium 35.0.1916.153 (Build 274914) 64-bit @ 290X
Same goes for chromium-dev 37.0.2062.0 (Build 278856) 64-bit

---

GPG key: http://pgp.mit.edu:11371/pks/lookup?op= … 2D653C3094  or  http://keys.gnupg.net/pks/lookup?op=get … 2D653C3094

NoSavvy

Member

From: Dorchester, Dorset, UK

Registered: 2013-01-23

Posts: 117

Re: The AMD/ATI Bar & Grill

Working here OK. on fully updated 64bit system. (using Openbox)

Last edited by NoSavvy (2014-07-14 20:21:52)

clfarron4

Member

From: London, UK

Registered: 2013-06-28

Posts: 2,163

Website

Re: The AMD/ATI Bar & Grill

Hi,

Just for information with the last version of catalyst from Vi0l0 repo, chromium is not working anymore in addition to GDM, it just crash xorg (coredump) as soon as it launches
my system is up to date, kernel 3.14.12-1-lts or 3.15.5-1, hardware is nothing fancy ATI 5650.

Chromium works here. I never managed to get GDM3 to work with AMD Catalyst and never tried to fix it because GDM 2.2 and MDM are available.

---

Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

ChemBro

Member

Registered: 2008-10-22

Posts: 704

Re: The AMD/ATI Bar & Grill

There is a new 14.6 beta update (tagged July 11th), but I don't know, what the difference is. There is no updated information.

blackdev1l

Member

Registered: 2014-06-12

Posts: 14

Re: The AMD/ATI Bar & Grill

Hello, i want to try the catalyst driver because with the open source driver my vga randomly crashes. But i can't boot up.
IT's a fresh new arch install with GDM and Cinnamon.
I installed catalyst by unofficial repository from Vi0L0's unofficial repository, i blacklisted radeon, added the module, disable kernel mode settings and created the right xorg with aticonfig --init. What am i missing?

VGA is an ati radeon 7950

Last edited by blackdev1l (2014-07-15 13:06:30)

clfarron4

Member

From: London, UK

Registered: 2013-06-28

Posts: 2,163

Website

Re: The AMD/ATI Bar & Grill

Hello, i want to try the catalyst driver because with the open source driver my vga randomly crashes. But i can't boot up.
IT's a fresh new arch install with GDM and Cinnamon.
I installed catalyst by unofficial repository from Vi0L0's unofficial repository, i blacklisted radeon, added the module, disable kernel mode settings and created the right xorg with aticonfig --init. What am i missing?

VGA is an ati radeon 7950

Have you tried a different DM?

Last edited by clfarron4 (2014-07-15 21:04:50)

---

Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

Vi0L0

Member

From: Poland

Registered: 2009-06-24

Posts: 1,349

Website

Re: The AMD/ATI Bar & Grill

Guys there's xorg-server 1.16 in [testing] repo.

securitybreach wrote that it's working well for him with catalyst-test.
I'm not that lucky and getting "symbol lookup error <path_here>/libglx.so: undefined symbol: LoadExtension" while starting X. IgnoreABI didn't help.
fglrx_drv.so don't have symbols for 116, but it's still missing 114 ones, so i don't think it's reliable source.

Can someone confirm if it's working/not working?
Feel free to remove xorg-server deps from catalyst-test' PKGBUILD or disable dep check while updating.

Also I created xorg115 repo: https://wiki.archlinux.org/index.php/AM … st#xorg115

---

GPG key: http://pgp.mit.edu:11371/pks/lookup?op= … 2D653C3094  or  http://keys.gnupg.net/pks/lookup?op=get … 2D653C3094

GordonGR

Member

From: Thessaloniki, Greece

Registered: 2011-11-07

Posts: 276

Re: The AMD/ATI Bar & Grill

I suppose the stable version (14.4) also needs xorg 1.15, right?

---

Intel(R) Celeron(R) CPU E3400 @ 2.60GHz, x86_64. AURs.

“No one without the knowledge of geometry may enter.“ Plato.

Vi0L0

Member

From: Poland

Registered: 2009-06-24

Posts: 1,349

Website

Re: The AMD/ATI Bar & Grill

Right.

---

GPG key: http://pgp.mit.edu:11371/pks/lookup?op= … 2D653C3094  or  http://keys.gnupg.net/pks/lookup?op=get … 2D653C3094

l0vot

Member

Registered: 2011-08-26

Posts: 117

Re: The AMD/ATI Bar & Grill

Oh how I wish the radeon driver could compete with catalyst when it comes to 3D acceleration and crossfire, but it can't. Yet.

doblerone

Member

Registered: 2011-12-08

Posts: 215

Re: The AMD/ATI Bar & Grill

I have an old ATI Radeon HD 4770 and I´m using the catalyst-total-hd234k drivers. Before that update, everything worked well.
After yesterday´s update, the size of one of my screens has been resized (now it doesn´t fill the whole screen) and my system randomly boot properly or with a lot of errors (I have to restart it by hand because it hangs).

Normally I update my system everyday, so for sure it has been one of yesterday´s installed packages:

[2014-07-23 17:33] [PACMAN] Running 'pacman -Syu'
[2014-07-23 17:33] [PACMAN] synchronizing package lists
[2014-07-23 17:33] [PACMAN] starting full system upgrade
[2014-07-23 17:35] [PACMAN] upgraded coreutils (8.22-4 -> 8.23-1)
[2014-07-23 17:35] [PACMAN] upgraded gcc-libs (4.9.0-5 -> 4.9.1-1)
[2014-07-23 17:35] [PACMAN] upgraded gcc (4.9.0-5 -> 4.9.1-1)
[2014-07-23 17:35] [PACMAN] upgraded kipi-plugins (4.0.0-1 -> 4.1.0-1)
[2014-07-23 17:35] [PACMAN] upgraded lib32-gcc-libs (4.9.0-5 -> 4.9.1-1)
[2014-07-23 17:35] [PACMAN] upgraded libltdl (2.4.2-13 -> 2.4.2-14)
[2014-07-23 17:35] [PACMAN] upgraded libtool (2.4.2-13 -> 2.4.2-14)
[2014-07-23 17:35] [PACMAN] upgraded thunderbird (24.6.0-1 -> 31.0-1)

Can it be that some dependencies are not anymore compatibles with the drivers? Maybe I´m just talking nonsense.

Last edited by doblerone (2014-07-24 16:32:40)

Lord Aro

Member

Registered: 2013-07-29

Posts: 16

Re: The AMD/ATI Bar & Grill

I'm trying to upgrade catalyst from 14.6-1 to 14.6-10, but now it seems to require gcc/gcc-libs? This causes issues, as i have gcc-[libs-]multilib installed. Was this an intentional change? If so, is there a way around it?

EDIT: Nevermind, it was actually related to libtool

Last edited by Lord Aro (2014-07-25 15:39:45)

PhotonX

Member

From: Munich

Registered: 2008-08-10

Posts: 605

Re: The AMD/ATI Bar & Grill

I'm trying to make catalyst-hd234k work on a Manjaro install. The video card is a HD4670. After ruling out the black screen issue described in the wiki by adding the nomodeset boot option I get stuck with the problem that has been already described in this thread: https://bbs.archlinux.org/viewtopic.php?id=101044 In short, when X tries to start the screen goes black and after some seconds the PC hard resets showing the message

A Hyper Transport sync flood error occurred on last boot. 

Is this a hardware problem or can something be done to get the card working with Catalyst?

Last edited by PhotonX (2014-07-27 11:50:29)

---

Desktop: http://www.sysprofile.de/id15562, Arch Linux    |    Notebook: Thinkpad L13 Yoga Gen2, Manjaro

The very worst thing you can do with free software is to download it, see that it doesn't work for some reason, leave it, and tell your friends that it doesn't work.  -  Tuomas Lukka

ewaller

Administrator

From: Pasadena, CA

Registered: 2009-07-13

Posts: 20,203

Re: The AMD/ATI Bar & Grill

I'm trying to make catalyst-hd234k work on a Manjaro install.

Please ask on the Manjaro forums.  They are the ones who know how their distribution works.

https://wiki.archlinux.org/index.php/Fo … pport_ONLY

---

Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

PhotonX

Member

From: Munich

Registered: 2008-08-10

Posts: 605

Re: The AMD/ATI Bar & Grill

ewaller, that's true, but on the other hand the packages by Vi0L0 are for Arch and this is the corresponding support thread. Unfortunately there is no analogous packages for Manjaro...

---

Desktop: http://www.sysprofile.de/id15562, Arch Linux    |    Notebook: Thinkpad L13 Yoga Gen2, Manjaro

The very worst thing you can do with free software is to download it, see that it doesn't work for some reason, leave it, and tell your friends that it doesn't work.  -  Tuomas Lukka

clfarron4

Member

From: London, UK

Registered: 2013-06-28

Posts: 2,163

Website

Re: The AMD/ATI Bar & Grill

ewaller, that's true, but on the other hand the packages by Vi0L0 are for Arch and this is the corresponding support thread. Unfortunately there is no analogous packages for Manjaro...

Doesn't change the point that Manjaro is a different system with an out-dated X stack, BFS as the default CPU scheduler and other settings (including different kernel configurations to the Arch kernel) which are different to those in a straight ArchLinux installation.

I would try building all the Catalyst packages yourself (there should be a Manjaro repository that holds old versions of the X server packages. Ask there.).

Last edited by clfarron4 (2014-07-27 20:19:40)

---

Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

PhotonX

Member

From: Munich

Registered: 2008-08-10

Posts: 605

Re: The AMD/ATI Bar & Grill

Thanks for the hint, I will try!

---

Desktop: http://www.sysprofile.de/id15562, Arch Linux    |    Notebook: Thinkpad L13 Yoga Gen2, Manjaro

The very worst thing you can do with free software is to download it, see that it doesn't work for some reason, leave it, and tell your friends that it doesn't work.  -  Tuomas Lukka

ewaller

Administrator

From: Pasadena, CA

Registered: 2009-07-13

Posts: 20,203

Re: The AMD/ATI Bar & Grill

PhotonX,
Thanks for the understanding and I understand your dilemma.  This is probably a good time to point out that we have nothing against other distributions and we wish them well.  We also welcome everyone to read and participate in these forums, regardless of the distribution they choose.  As moderators, one of our charters is to ensure that information posted on this site is unambiguous with regards to Arch Linux.  As clfarron4 points out, other forks of Arch do have significant differences that may be the root cause of issues.  As we are not experts in other distributions, that is why we have the Arch Linux only support policy.

---

Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

Haikarainen

Member

Registered: 2012-09-04

Posts: 93

Re: The AMD/ATI Bar & Grill

I removed catalyst and installed radeonsi instead. I didn't expect much but wow, I get BETTER performance in source engine games at least (and unigine valley) than I did before. Only setback is opengl 3.3 support instead of full opengl 4.4 support. The free driver finally seems to come to par with the catalyst driver performance wise!

I should add I'm sporting an R9 280X with 3GB GDDR5 memory on a Tahiti core, so I have some safe-margin for bad drivers.

ChemBro

Member

Registered: 2008-10-22

Posts: 704

Re: The AMD/ATI Bar & Grill

I get BETTER performance in source engine games at least (and unigine valley) than I did before. Only setback is opengl 3.3 support instead of full opengl 4.4 support. The free driver finally seems to come to par with the catalyst driver performance wise!

Source engine I get, because Valve and the Mesa guys did a really good job in getting a superb performance with open-source drivers in general, but even Unigine Valley? That's odd. There is partial OpenGL 4.x already in the drivers and 4.0/4.1/4.2 support by Mesa is nearlly finished.